Binatone Electronics MDC10W HD Dash Cam with Wi-Fi User Manual MDC10W IFU UK EN

Binatone Electronics International Ltd. HD Dash Cam with Wi-Fi MDC10W IFU UK EN

Users Manual

USER’S GUIDEHD Dash Cam with Wi-Fi® For Road or In-Car MonitoringModel: MDC10WThe features described in this user’s guide are subject to modifications without prior notice.
This User’s Guide has all the information you need to make the most out of your product.Please read the Safety Instructions on page 5 before you install the unit.Before you use the Dashboard Camera, we recommend you insert a SD card into the SD card slot.Got everything?• Dashboard Camera • Suction Mount• Sun Visor Mount• Car Adapter• User ManualThank you for purchasing the Dashboard Camera. The Dashboard Camera is designed to let you record each and every instant while you are on the road, and manage your recordings via Hubble Dashcam app.Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product related questions, please call:+44 (0) 844 557 0890 (UK only)* *Calls cost 7p per minute plus your telephone company's access chargeMon - Fri 8:00am to 8:00pmSat 8.30am to 2:00pm+44 (0) 8187 62092 (ROI)On the Web: www.motorolastore.com/supportEmail: support@motorolastore.comWelcome...to your new Motorola Dashboard Camera!
Overview of your Dashboard Camera134567821.Lens Wide Angle 140°2.microSD card slotInsert a microSD card here.*3.DC-IN & USB SocketConnect the car adapter or USB data cable here. 4.Recessed Reset ButtonIn the unlikely event MDC10W becomes unresponsive, insert a pin into the hole to reset MDC10W.5.Mounting Nut Screw in the supplied Suction Mount or Sun Visor Mount here.6.Power Button and IndicatorPress and hold for 3 seconds to turn MDC10W On / Off. Red light: ChargingBlue light flashing: Recording7.MicrophoneIntegrated microphone for audio recording.8.Speaker* Make sure the printed side of the card is facing the right direction as shown.
4 Table of contents Table of contents1. Safety Instructions........................................................ 52. Getting Started.............................................................. 62.1 Installing your Device ..............................................62.2 Basic Use....................................................................... 83. Connecting Devices...................................................... 93.1 System Requirements .................................................. 93.2 Install Hubble Dashcam App.................................... 93.3 Connect your smartphone to MDC10W................ 93.3.1 On Android Smartphone .............................93.3.2 On iOS Smartphone .....................................124. Manage your recordings.............................................145. Manage downloaded photos and videos ...............196. Main features and Settings ........................................216.1 Recording and Saving ............................................216.2 Mass Storage Mode .................................................216.3 Parking Mode ............................................................226.4 G-sensor / File Protection....................................226.5 Automatic Start / Stop .........................................237. Other settings ..............................................................247.1 Change Wi-Fi password ...................................... 247.2 Language Settings................................................. 247.3 Device key sound ................................................... 247.4 Audio recording...................................................... 247.5 White Balance.......................................................... 247.6 Exposure .................................................................... 247.7 Restore default settings .......................................257.8 Restore Wi-Fi password ......................................258. Disposal of the Device (Environment)................... 269. General Information ...................................................2710. Technical Specifications&FCC CAUTION...............34
Safety Instructions 5ENGLISH1. Safety InstructionsWARNING• Do not install the device within the driver’s or passenger airbag operation range. Please refer to your car’s service manual for details about the operation range of your car’s airbags. • Never modify modes, settings, or program your device while your car is in motion. • Ensure the device and its power cord are installed as per the instructions on page 6, and do not obstruct the driver’s line of sight or impede the operation of any driving controls.
6 Getting Started2. Getting Started2.1 Installing your DeviceThe above illustration refers to a left-hand drive car. For right-hand drive cars, please flip the position of the cable installation accordingly. • Install your device within the rear-view mirror area and within the wiper cleaning area to get the clearest possible view. • Your device comes with a 3.6m USB power cable. Organise the power cord so that it does not interfere with the driver's vision. Use cable clips to secure the power cord if necessary. Best Installation Location
Getting Started 7ENGLISH• There are two ways to install MDC10W in your car: • When using the dashboard camera in your car, we recommend that you always use the cigarette lighter car adapter in order to maintain the battery level. The unit is not 1. Screw the MDC10W into the mounting bolt of the Suction mount. 2. Press the suction cup of the Suction mount against the windshield, and press the lever to lock. Ensure that the mount is safely attached to the windshield. Suction mount1. Screw the MDC10W into the mounting bolt of the Sun visor mount.2. Push the clip of the Sun visor mount to the sun visor.Sun visor mount
8 Getting Starteddesigned to run on battery power alone, the battery is there for backup purposes only.2.2 Basic Use• Insert a micro SD card (not provided) into the SD card slot. Your dashboard camera accepts SD cards of up to 32GB capacity (class 10). It is recommended that you format the SD card. • Your dashboard camera will always power up and begin loop recording automatically as soon as it is connected to a power source. Simply connect your dashboard camera to a power source that comes on when you start the engine of your vehicle, and the dashboard camera will start loop recording automatically (Blue light flashing) without you having to remember to press on a button.• To stop recording to protect your privacy, press and hold the power button to shut down the device.
Connecting Devices 9ENGLISH3. Connecting Devices3.1 System Requirements Smartphones: Android™ (Android™ 5.0 or higher) and iOS® (iOS 10) only. 3.2 Install Hubble Dashcam App Hubble Dashcam App is available for free download from Google Play Store (Android) and the App Store (iOS). The App can easily be found by searching for "Hubble Dashcam" in your chosen store. Once installed, Hubble Dashcam App will be available on your smartphone. 3.3 Connect your smartphone to MDC10WConnecting your smartphone to MDC10W works similarly as connecting your smartphone to a Wi-Fi network. First, make sure that your MDC10W is powered on by the car adapter (Red light on and Blue light flashing). 3.3.1 On Android Smartphone1. Open Hubble Dashcam app on your smartphone.
10 Connecting Devices2. The following screen appears. 3. Tap “Connect to the dashcam” to connect your smartphone to MDC10W.4. Enter password (the default password is 12345678) and tap Yes.
Connecting Devices 11ENGLISH5. Once connected successfully, the View Finder and Main control panel appear as below:
12 Connecting Devices3.3.2 On iOS Smartphone1. Go to Settings > Wi-Fi and select "MDC10W_xxxxxxxxx" from the list of networks.2. Enter password (the default password is 12345678) and tap Join.3. The following screen appears:4. Open Hubble Dashcam app, and tap “Connect to the dashcam” to connect your smartphone.
Connecting Devices 13ENGLISH5. Once connected successfully, the View Finder and Main control panel appear as below:
14 Manage your recordings4. Manage your recordingsThe following instructions and screenshots show how things work and look using Android phones. However, the basic steps should still work for iOS phones. Although Hubble Dashcam app has been designed to be viewed in portrait mode as you would normally use your phone, some functions are best viewed when your phone is rotated to landscape mode, such as: Live View and when watching recordings. NoteFunctions and features in Hubble Dashcam app are subject to change without notice.
Manage your recordings 15ENGLISH Live / Playback (Displayed on top left corner)Live: screen shows real-time live stream from MDC10W Red dot flashing: loop recording mode Playback: screen shows playback of the recorded video that is stored on the memory card of MDC10WEvent videos Shows the list of Event videos that were automatically locked when G-sensor detects impacts.Tap to playback an Event video from the list.To return to live video and recording mode, tap .Take photo This allows you to take photo of a live video or a video playback, and save it in your app. Tap to take photo. To view the photo, tap Downloaded and select Photo.To return to view finder and main control panel, tap Home.
16 Manage your recordingsPlayback video Tap and drag inside the timeline bar to select the time you wish to playback the video. Recordings are colour-coded: green for normal recordings, red for Event videos, while no colour indicates that there is no recording during that time period.Tap to start playback. To return to live video and recording mode, tap .
Manage your recordings 17ENGLISHDownload videos During video playback, tap to download video.Tap on the first picture that you want to start video download (Start), followed by the last picture that you want to end video download (End), and then tap Download. Your chosen videos will be downloaded to your smartphone.To view downloaded videos, tap Downloaded and select Video.To return to view finder and main control panel, tap Home.
18 Manage your recordingsSettings(Displayed on top right corner)Tap , and the following screen will appear:Tap to view more information or options. Ta p o n Dashcam Settings, and the following screen will appear:The default settings have been chosen for best performance. However, you can also change them based on your needs.
Ma nag e do wnloaded photos and videos 19ENGLISH5. Manage downloaded photos and videosYou can use Hubble Dashcam app to manage files that have already been downloaded from MDC10W to your smartphone.1. From the view finder and Main control panel, tap Downloaded and the following screen will appear: • Tap to select Video or Photo.• To playback a video or view a photo, simply tap on the video or photo.• To return to the previous screen, tap Home.• To save Videos or Photos to your smartphone’s memory, select a file and tap SAVE on the bottom right corner. A "DASHCAM" folder will be automatically created to store saved videos and photos. You can select videos or photos to share on your social network.
20 Manage downloaded photos and videos• To delete a picture, tap Select, then tap to select the picture you want to delete, and then tap . To cancel your selection, tap Cancel.
Main features and Settings 21ENGLISH6. Main features and Settings 6.1 Recording and SavingThe purpose of your MDC10W is to continuously record the road ahead, and to automatically record and save any incidents or accidents you might be involved in. The status LED (Blue) will flash when it is recording.By default, MDC10W records video in clusters of 1 minute. It can also be set to 3 minutes or 5 minutes. Although a longer loop recording time improves continuous playback, it will result in larger files, which is more difficult to manage.To change the default duration for each recording cluster, tap in Hubble Dashcam app, select Dashcam settings > Loop recording.Once your SD card is full, it will automatically overwrite the oldest footage. 6.2 Mass Storage Mode You can also connect MDC10W to your computer using a standard micro USB cable to view and manage videos stored inside the SD card.
22 Main features and Settings6.3 Parking Mode Your MDC10W can record footages of events occurring when your car is parked with its engine off. The built-in battery will keep the G-sensor of your device in detection mode, and will start recording automatically for 30 seconds if it detects vibration or a shock. Parking mode can only record and save footage after an event has been detected by the G-sensor. IMPORTANT! Parking mode is disabled by default. To enable parking mode, tap in Hubble Dashcam app > Dashcam settings > Parking mode. 6.4 G-sensor / File Protection Your MDC10W is equipped with a G-sensor that detects shocks. Each time an impact is detected, it will lock the recording during which the event occurred and prevent the loop recording from being overwritten. The sensitivity is set to Low by default, but can be set to Off/High/Medium/Low. To change the sensitivity of the G-sensor, tap in Hubble Dashcam app, select Dashcam settings > G-Sensor.
Main features and Settings 23ENGLISHNote that if you turn the G-sensor off, your MDC10W will not be able to lock and protect any footages. To unlock protected recordings, tap in Hubble Dashcam app and select Storage Management > Unlocked > Yes.IMPORTANT!All the event videos will be unlocked. Make sure that you have saved important videos before you proceed.6.5 Automatic Start / Stop MDC10W senses power supplied to the cigarette lighter car adapter as soon as the vehicle ignition is turned on, and will start to record automatically. When the ignition is turned off, MDC10W shuts down automatically.
24 Other settings7. Other settings7.1 Change Wi-Fi passwordTo change password, tap in Hubble Dashcam app, select Dashcam settings and tap MODIFY under Wi-Fi password.7.2 Language SettingsTo change language settings of your Dashcam app, tap in Hubble Dashcam app, select Dashcam settings > Language settings.7.3 Device key soundTo turn device key sound on or off, tap in Hubble Dashcam app, select Dashcam settings > Device key sound.7.4 Audio recordingTo turn audio recording on or off, tap in Hubble Dashcam app, select Dashcam settings > Audio Recording.7.5 White BalanceTo change white balance, tap in Hubble Dashcam app, select Dashcam settings > White balance.7.6 ExposureTo change exposore, tap in Hubble Dashcam app, select Dashcam settings > Exposure.
Other settings 25ENGLISH7.7 Restore default settingsTo restore your MCD10W to its default settings, tap in Hubble Dashcam app, select Dashcam settings > Restore the default settings.7.8 Restore Wi-Fi passwordWith the power off, press and hold the power button on MDC10W for 30 seconds until the blue light flashes, then release the power button. The Wi-Fi password of MDC10W will be restored to 12345678.
26 Disposal of the Device (Environment)8. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this.Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.Please contact your local authorities in case you need more information on the collection points in your area.Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.
General Information 27ENGLISH9. General InformationIf your product is not working properly....1. Read this User's Guide.2. Visit our website: www.motorolahome.com/support3. Contact Customer Service atConsumer Products and Accessories Limited Warranty ("Warranty")Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International Ltd ("BINATONE").What Does this Warranty Cover?Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product is manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable.THIS WARRANTY GIVES YOU SPECIFIC LEGAL +44 (0) 844 557 0890 (UK only)* *Calls cost 7p per minute plus your telephone company's access charge Mon - Fri 8:00am to 8:00pmSat 8.30am to 2:00pm+44 (0) 8187 62092 (ROI)Email: support@motorolastore.com
28 General InformationRIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE.Who is covered?This Warranty extends only to the first consumer purchaser, and is not transferable.What will BINATONE do?BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.What Other Limitations Are There?ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
General Information 29ENGLISHFITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
30 General InformationExclusionsNormal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this Warranty.Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, Products Covered Length of CoverageConsumer Products One (1) year from the date of the Products, original purchase by the first consumer purchaser of the product.Consumer Accessories Ninety (90) days from the date of the Accessories, original purchase by the first consumer purchaser of the product.Consumer Products and Accessories that are Repaired or ReplacedThe balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer.
31 General Informationrain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorised Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorised service centres, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
32 General InformationHow to Obtain Warranty Service or Other Information?To obtain service or information, please call:You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorised Repair Centre.To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number.These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent employee or staff of BINATONE, that may have been made in connection with the said purchase.+44 (0) 844 557 0890 (UK only)* *Calls cost 7p per minute plus your telephone company's access charge Mon - Fri 8:00am to 8:00pmSat 8.30am to 2:00pm+44 (0) 8187 62092 (ROI)Email: support@motorolastore.com
General Information 33ENGLISHEN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 62479:2010 EN 301 489-1 V2.2.0, EN 301 489-17 V3.2.0 EN 300 328 V2.1.1 London, 26 Sep 2017 Place & Date BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk EC Declaration of Conformity We, Company name: Postal address: Postcode and City: Telephone number: E-Mail address: declare that the DoC is issued under our sole responsibility and belongs to the following product: Apparatus model/Product: Type: Object of the declaration: The object of the declaration described above is in conformity with the relevant Union harmonization legislation: RE Directive 2014/53/EU. The following harmonised standards and technical specifications have been applied: Safety (Article 3.1a): Health (Article 3.1a): EMC (Article 3.1b): Radio Spectrum (Article 3.2): Notified body : Bay Area Compliance Labs Corp. (EU Identification Number: 1313) Additional information: Hardware Version: Software Version: Accessories: Component: Signed for and on behalf of Henry / Product Manager Binatone Telecom PLC 1 Apsley Way NW2 7HF London +44 (0) 20 8955 2700 binatoneuk@binatonetelecom.co.uk MDC10W series Dash Camera V1.2 MDC10W V2 Adapter Model: PGCB500150W1EU 3.7V/230mAh Lithium Rechargeable Battery
34 Technical Specifications10. Technical SpecificationsVideo resolution HD 720P resolutionLens 140° wide angleVideo format MJPEGMicro SD card Up to 32G capacity, Class 10LED lights SupportedMic and Speaker Built-inPower 5V DCBattery Li-polymer batteryDevice dimensions 92.5x35x41mmDevice weight 46gMount dimensions Suction Mount: 55x55x50mmSun Visor Mount:85.3x64x27.3mmSupported operating system for file viewingWindows XP and later, MAC OS
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylised M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2017 Motorola Mobility LLC. All rights reserved.UK_EN Version 1.0Printed in China
FCC CAUTION Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 34 Technical Specifications
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for helpFCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum This transmitter must not be co-located or operating in conjunction distance 20cm between the radiator&your bodywith any other antenna or transmitter

Navigation menu