Binatone Electronics MH003 Motorola Boom2 User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3122629
Application ID	+C9Oe7A6w6WklcgXGjdcaQ==
Document Description	User manual_1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	140.14kB (1751752 bits)
Date Submitted	2016-09-05 00:00:00
Date Available	2017-02-14 00:00:00
Creation Date	2016-08-31 10:01:05
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2016-08-31 10:01:05
Document Title	Pages from [Motorola Boom2 S65x80 Combined EN_ES_FR_PT]
Document Creator	PScript5.dll Version 5.2.2
Document Author:	yu.meng

ATAGLANCE
the important bits, quick and easy
Volume Up
Charge Button
(Micro USB)
K”
Call Button
Press to
answer/
end call.
._ Charging Status Light:
Green , batten/full
Vellow would 50% charged
Red , battery low
MOTOROLA BOOM2 We???
close - 0H ,7
M OTO RO LA BOO M 2+ Miagphone
EN 1
Volume Down Button
CHARGE IT
let's get you up and running
To charge your headset, plug the USB cable into the
headset‘s micro USB port and connect to USB power
source.
Note: Fully charge the headset before you use it.
Tip: To save battery power, turn ot‘l the headsetwhen
you're not uslng it.
Caution: Your battery ls designed to last the lite of your
device, It should only be removed bya recycling
facllltyt Any attempt to remove or replace your battery
will damage the devlce, void your warranty, and could
cause injury.
Earpiece
CONNECT & GO
let's get you connected
EASYPAIRTM METHOD
Turn on Bluetooth on your device.
Turn on your headset and follow the voice
prompts
Go to the Bluetooth menu on your device
to pair & connectwith the headset. Enter
passcode ooou rr prompted.
EAR TIP (NO HOOK)
Attach eartip
COMFORT
what feels best on you
Choose your most comfortable fit: onrear hook. or rear
tip with no hook.
EAR HOOK
Rotate & turn ear hook for
right or left use
Right Ear Left Ear
EN 5
BASICS
standard features, advanced quality
CALLS
To...
answer a call Press the Call button.
reject a call Press and hold the Volume Up or
Volume Down button until you
hear a tone.
make a voice dial Press the Call button to activate
call voice recognition.
(phone dependent)
redial last call Press and hold the Call button
until you hear a tone
mute or unmutea Press and hold the Volume Up
call and Volume Down buttons
together until you hear”mute
on" or“mute oft".
EN 7
To...
end a call Press the Call button
change call volume Press theVolurne Up orVolume
Down button To quickly change
volume, press and hold the
Volume Up orVolurne Down
buttont
Notes:
' Some features are phone/network dependent.
‘ Using a mobile device oraccessory while driving
may cause distraction and may be illegal. Always
obey the laws and drive safely.
STATUS LIGHT
answer a second Press the Call button.
incoming call
lf light shows... your headset is...
three blue flashes powering on/of‘f
reject a second call Press and hold the Volume Up or
Volume Down button until you
heara tone.
lf light shows... your headset is...
slow blue pulse onacall
slow blueflash on standby (one phone)
slow green flash on standby (two phones)
slow red flash idle (not connected to a phone)
slow red flash on a call (call muted)
short blue/red flash attempting to connect
short red flash low battery
steady purple in settings mode
Note: After one minute on a call or 20 minutes of
inactivity, the light stops flashing to conserve power,
but the headset remains on. Closing the Boom also
saves battery life.
10 EN
steady blue powered on & searching for a
device
rapid blue/purple connection successfully
flashes
short blue flash incoming/outgoing call on
phone 1
short purple flash incoming/outgoing callon
phone?
EN 9
ADVANCED
more clever stuff
SECOND DEVICE
Do you use two phones? Or maybe a phone and a
tablet? Connect with both of themt
1 Pair the first device with your headset as normal (see
”CONNECT & G0" on page 4).
2 Turn off the Bluetooth“9 feature on the first device.
3 Now pair the second device with your headset as
normal.
4 Once paired, to connect with both devices simply
turn them on. You'll hear "phone one connected"
and “phone two connected" as each device
connects with your headset.
Note: To use headset features like voice dial, redial, or
end call, just use the feature as normal and follow the
voice prompts.
EN 11
CALLER ID
lfyour phone knows the caller's number, you'll hear
ucall from " on an incoming call.
Note: This feature is phone/network dependent.
BATTERY READOUT
When you're not in a call, press the Volume Up and
Volume Down buttons togetherin standby mode to
hear how much battery talk-time is left on your headset.
Tip: To save battery power. turn off the headsetwhen
you’re not usingit.
12 EN
Hubble ConnectTM for Motorola
Hubble Connect for Motorola can greatly enhance
your earbud experience. Download app for free at the
App Store® or Gooqle PlayTM (AndroidTM 4.3 or higher).
' Locate a lost earbud: Locate on a map the last time
your earbud was connected to your device.
Safety instructions for use @
To avoid hearing damage, keep the volume at a
moderate level. Avoid listening to music at loud
volume levels for prolonged periods of time as this
may cause permanent hearing damage or hearing loss.
Your hearing is delicate and highly sensitive so please
listen to your music responsibly. For more information
visit the Deafness Research Foundation www,drf.org
Don‘t use Boom when it is unsafe to do so. For
example, while operating a vehicle, cycling. crossing a
road, or any activity which requires your attention and
ability to hear.
You should be aware of your surroundings and use
Boom responsibly.
14 EN
SETTINGS
Press and hold the Call button while turning on the
headset, then follow the voice prompts to turn these
features on/off:
' Language: Select language.
' Restore Factory Settings: Reset default factory
settings on your headset.
Caution: This feature erases all device pairing
information stored on the headset.
‘ Voice Interface: Turn voice prompts on/off.
‘ Caller ID Alert: Hear caller ID forincoming calls.
‘ Multipoint: Connect your headset to two devices.
‘ Wide-band: Use HD Audio Plus forincreased clarity
and richersound.
Note: Both the phone and network need to support
widerband speech.
' Voice Answer: Say ”Answer" to receive call.
EN 13
Help & more
' Get help: Visit www.motorolahomecom/support
' Find accessories at: www.motorolahome.com
Note: ”you're watching video while using your
earbuds, youraudio may be slightly out of sync with
your video.
Manufactured, distributed, or sold by Binatone Electronics
International LTD., official licensee forthis product. MOTOROLAand
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings. ttc. and are used under license. Apple
logo is a trademark orAppie Inc., registered in the us. and other
countries. App Store is a service mark oiAppie lnc. Google Play and
Android aretrademarks of Google inc. All othertrademarks are the
property oi their respective owners. c 2015 Motorola Mobility LLC, All
rights reserved.
Product lD: MHUUS
Bluetooth lD: D032280
FCC lD: VLdeMHDDS
IC: 4522A7MH003 ®

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2016:08:31 10:01:05
Modify Date                     : 2016:08:31 10:01:05
Title                           : Pages from [Motorola Boom2 S65x80 Combined EN_ES_FR_PT]
Creator                         : PScript5.dll Version 5.2.2
Author                          : yu.meng

EXIF Metadata provided by EXIF.tools