Biostar Geforce 6100 Am2 Owners Manual CRU51 M2_V3x&V1x_1019C

2014-07-31

: Biostar Biostar-Geforce-6100-Am2-Owners-Manual biostar-geforce-6100-am2-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 132 [warning: Documents this large are best viewed by clicking the View PDF Link!]

GeForce 6100 AM2 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protec tion against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular ins talla tion.

The ve ndor makes no represe nta tio ns or warranties with respec t to the

contents here and specially disclaims any implied warranties of merchantability

o r fi tnes s fo r a ny p u rp ose . F urt he r t he ve nd o r res e rves t he ri g ht to rev ise t his

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mis takes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction .............................................1

1.1 Before You Start...................................................................1

1.2 Package Checklist................................................................1

1.3 Motherboard Features.......................................................... 2

1.4 Rear Panel Connectors (Ver 3.x)............................................ 4

1.5 Rear Panel Connectors (Ver 1.x).............................................4

1.6 Motherboard Layout (Ver 3.x)............................................... 5

1.7 Motherboard Layout (Ver 1.x)...............................................6

Chapter 2: Hardware Installation ..............................7

2.1 Installing Central Processing Unit (CPU)................................ 7

2.2 FAN Headers........................................................................8

2.3 Installing System Memory.....................................................10

2.4 Connectors and Slots............................................................12

Chapter 3: Headers & Jumpers Setup......................14

3.1 How to Setup Jumpers..........................................................14

3.2 Detail Settings.....................................................................14

Chapter 4: NVIDIA RAID Functions.........................24

4.1 Operation System................................................................24

4.2 Raid Arrays.........................................................................24

4.3 How RAID Works.................................................................24

Chapter 5: Useful Help ..............................................26

5.1 Driver Installation Note .......................................................26

5.2 Award BIOS Beep Code........................................................27

5.3 Extra Information................................................................27

5.4 Troubleshooting...................................................................29

Chapter 6: WarpSpeeder™ .......................................30

6.1 Introduction........................................................................30

6.2 System Requirement............................................................30

6.3 Installation.........................................................................31

6.4 WarpSpeeder™....................................................................32

Appendencies: SPEC In Other Language ................38

German................................................................................................38

France..................................................................................................40

Italian..................................................................................................42

Spanish................................................................................................44

Portuguese...........................................................................................46

Polish...................................................................................................48

RUSSIAN...............................................................................................50

ARABIC................................................................................................52

JAPANESE............................................................................................54

GeForce 6100 AM2

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk you for choosing our product. Be fore you sta rt installing the

mo the rboa rd , plea se make su re you fo llow the ins tructions be lo w:

 Prepare a dry and stable working environment with

s uf ficie nt ligh ting .

 Always disconnect the computer from power outlet

be fo re ope ra tion.

 Befo re you take the mo the rboa rd ou t from a n ti-s ta tic

bag, ground yourself properly by touching any safely

grounde d appliance, or use grounded wrist strap to

remove the static charge.

 Avo id tou ch ing the compone nts o n m o the rboa rd o r the

rear side of the board unless ne cessa ry. Hold the board

on the edge , do not try to bend or flex the board.

 Do no t lea ve any unfastened sma ll pa rts inside the

case after installation. Loose parts will cause short

circuits which ma y damage the equipment.

 Keep the computer from dangerous area, such as heat

source , humid a ir and wate r.

1.2 PACKAGE CHECKLIST

FDD Cable X 1

HDD Cable X 1

Rear I/O Panel for ATX Case X 1

Use r’s Manua l X 1

Fully Setup Driver CD X 1

Se ria l ATA Cab le X 1 (op tiona l)

Se ria l ATA Po we r Cab le X 1 (o ptio nal)

USB 2.0 Cable X1 (optional)

S/P DIF ou t Ca ble X 1 (op tiona l)

Motherboard Manual

1.3 MOTHERBOARD FEATURES

Ver 3.x Ver 1.x

CPU

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Sempron

processors

AMD 64 Arc hitec ture enables 32 and 64 bit

computing

Supports Hyper Transport and Cool=n=Quiet

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Sempron

processors

AMD 64 Arc hitec ture enables 32 and 64 bit

computing

Supports Hyper Transport and Cool=n=Quiet

FSB Supports up to 1000 MHz Bandwidth

Support HyperTransport

Supports up to 1000 MHz Bandwidth

Support HyperTransport

Chipset GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Graphics Integrated in GeForce 6100 Chipset

Max Shared Video Memory is 256 MB

Integrated in GeForce 6100 Chipset

Max Shared Video Memory is 256 MB

Super I/O

ITE 8712F / 8716F

Provides the most commonl

us e d l e

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

ITE 8712F / 8716F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DIMM Slots x 4

Eac h DIMM supports 256/512MB & 1GB DDR2

Max Memory Capicity 4GB

Dual Channel Mode DDR2 memory module

Supports DDR2 400 / 533 / 667 / 800

Registered DIMM and ECC DIMM is not

supported

DIMM Slots x 4

Eac h DIMM supports 256/512MB & 1GB DDR2

Max Memory Capicity 4GB

Dual Channel Mode DDR2 memory module

Supports DDR2 400 / 533 / 667 / 800

Registered DIMM and ECC DIMM is not

supported

IDE

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4,

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4,

SA TA II

Integrated Serial ATA Controller

Data transfer rates up to 3 Gb/s.

SATA Version 2.0 specification compliant.

Integrated Serial ATA Controller

Data transfer rates up to 3 Gb/s.

SATA Version 2.0 specification compliant.

LAN Realtek 8100C

10 / 100 Mb/s Auto-Negotiation

Realtek 8201CL PHY

10 / 100 Mb/s Auto-Negotiation

GeForce 6100 AM2

Ver 3.x Ver 1.x

Sound

ALC 850

8 channels audio out

AC 97 Version 2. 3

ALC 655 / 658 (optional)

6 channels audio out

AC 97 Version 2. 3

PCI slot x2 PCI slot x2

PCI Express x16 slot x1 PCI Express x16 slot x1 Slots

PCI Express x 1 slot x1 PCI Express x 1 slot x1

Floppy c onnector x1 Floppy c onnector x1

Printer Port connector x1 Printer Port connector x1

IDE Connector x2 IDE Connector x2

SA TA C onnect or x2 SA TA Connect or x2

Front Panel Connector x1 Front Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

CD-in Connec tor x1 CD-in Connec tor x1

S/PDIF out connector x1 S/PDIF out connector x1

CPU Fan header x1 CPU Fan header x1

Sys tem Fan header x3 S ys tem Fan header x1

Chassis open header (optional) x1 Chassis open header (optional) x1

CMOS clear header x1 CMOS clear header x1

USB connector x2 USB connector x2

Power Connector (24pin) x1 Power Connector (24pin) x1

On Board

Connector

Power Connector (4pin) x1 Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l Po rt x 1

VGA port x1

LAN port x1

USB Port x4

Audio Jack x6

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l Po rt x 1

VGA port x1

LAN port x1

USB Port x4

Audio Jack x3

Board Size 244 x 244 (mm) 210 x 244 (mm)

Special

Features

NVIDIA nTunes

RAID 0 / 1 support

NVIDIA nTunes

RAID 0 / 1 support

OS Support

Windows 2K / XP

Biostar Reserves the right to add or remove

support for any OS With or without notice.

Windows 2K / XP

Biostar Reserves the right to add or remove

support for any OS With or without notice.

Motherboard Manual

1.4 REAR PANEL CONNECTORS (VER 3.X)

Line In

Line Out

Mic In

Center

Re ar

Side

PS/2

Mouse

PS/2

Keyboard COM1 VGA1 USBX2USBX2

LAN

1.5 REAR PANEL CONNECTORS (VER 1.X)

Line In

Line Out

Mic In

PS/2

Mouse

PS/2

Keyboard COM1 VGA1 USBX2USBX2

LAN

GeForce 6100 AM2

1.6 MOTHERBOARD LAYOUT (VER 3.X)

nForce

410

JKB MS1

J U SB1

JAUDIO1

J U SBLAN 1

BIOS

PCI-EX1_1

PCI-EX16

PCI1

FDD1

BAT1

JCOM1

JUSBV1

JCDIN1

Codec

LAN

JFAUDIO 1

JAT XPWR2

JSPDIF_OUT1

PCI2

JUSBV2

JUSB2 JUSB3

DIMMA1

JSFAN1

(Optio nal)JCI1

JCMOS1

IR ( optio nal)

IDE 1

IDE 2

JATXPWR1

JCFAN1

GeForce

6100

JV GA 1

JSATA2

JSATA1

DIMMB1

DIMMB2

DIMMA2

Socket A M2

JKBV1

JPANEL1

Super I/O

JSFAN 2

JNFAN1

JDDRII_22V

PWR SW1

RSTSW2

JPRNT1

LED_D1

LED_D2

Note: represents the 1■st pin.

Motherboard Manual

1.7 MOTHERBOARD LAYOUT (VER 1.X)

nForce

410

JKBMS1

JUSB1

JA U D IO 1

JU S BL AN1

BIO S

PCI-EX1_1

PCI-EX16

PC I1

FDD1

JCOM1

JUSBV1

JC DIN1

Cod ec

LAN

JFAUDIO1

JATX PWR2

JSP DIF_OUT1

PCI2

J USBV2 JUSB 2

J USB3

DIMMA1

JSFAN1

JC I1

(optional)

JCMOS1

IDE1

IDE2

JATXPW R1

JC FAN 1

GeForce

6100

JVGA1

J SATA2

J SATA1

DIMMB1

DIMMB2

DIMMA2

Socket A M2

JPANEL 1

Supe r I /O

JNFAN1

(opti onal )

JPRNT1

BAT1

Note: represents the 1■st pin.

GeForce 6100 AM2

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point forwards this white triangle. The CPU will fit

only in the correct orientation.

Motherboard Manual

Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the JCFAN1. This completes the installation.

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

JCFAN1

4 Smart Fan Control

GeForce 6100 AM2

JNFAN1: North Bridge Fan Header (Optional for Ver 1.x)

JSFAN1: System Fan Header

JSFAN2: System Fan Header (Only for Ver 3.x)

JNFAN1/JSFAN1

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate

sense

JSFAN2

Pin Assignment

1 Ground

2 +12V

JNFAN1

(optional)

JSFAN1

JSFAN2

JNFAN1

3 Ground

Note:

The JCFAN1 Supports 4-pin head c onnect or, and JSFAN1/J SFAN2/JNFAN1 support

3-pin head connector. When c onnecting with wires ont o co nnect ors, please note that the

red wire is the positi ve and shoul d be connected t o pi n#2, and th e bl ac k wire is Ground

and should be c onnec ted to GND.

JCFAN1 Supports s mart fan function

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

B. Memory Capacity

DIMM Socket

Location DDR Module To t a l Mem o r y

Size

DIMMA1 256MB/512MB/1024MB

DIMMB1 256MB/512MB/1024MB

DIMMA2 256MB/512MB/1024MB

DIMMB2 256MB/512MB/1024MB

Max is 4GB.

GeForce 6100 AM2

C. Dual Channel Memory installation

To trigger the Dual Channel f unction of the motherboard, the memory module

must meet the following requirements:

Install memory module of the same density in pairs, shown in the f ollowing

table.

Duual Channel Status DIMMA1 DIMMB1 DIMMA2 DIMMB2

Enabled O O X X

Enabled X X O O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or

x16)

Motherboard Manual

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector

The motherboard prov ides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the

prov ided f loppy drive ribbon cables.

IDE1/IDE2: Hard Disk Connectors

The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO

Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality. It has two

HDD connectors IDE1 (primary) and IDE2 (secondary).

The IDE connectors can connect a master and a slav e driv e, so you can

connect up to four hard disk drives. The f irst hard drive should always be

connected to IDE1.

3940

IDE2 IDE1

GeForce 6100 AM2

PCI-Ex16: PCI-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously per

direction, f or an aggregate of 8GB/s totally.

PCI-Ex1_1: PCI-Express x1 Slot

- PCI-Express 1.0a compliant.

- Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

- 2X bandwidth ov er the traditional PCI architecture.

PCI-EX1

PCIEX16

PCI1~PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands f or

Peripheral Component Interconnect, and it is a bus standard for expansion

cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SET UP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is

placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETT INGS

JPANEL1: Front Panel Header

This connector includes Power-on, Reset, HDD LED, Power LED, Sleep

button, and speaker. It allows user to connect the PC case’s front panel

switch functions.

SLP PWR

LED

On/Off

RST

HLED

SPK

Pin Assignment Function Pin Assignment Functio n

1 +5V 2 Sleep control

3 N/A 4 Ground Sleep button

5 N/A 6 N/A N/A

7 Speaker

Speaker

Connector

8 Power LED (+)

9 HDD LED (+) 10 Power LED (+)

11 HDD LED (-)

Hard drive

LED 12 Power LED (-)

Power LED

13 Ground 14 Power button

15 Reset control Reset button 16 Ground Power-on button

GeForce 6100 AM2

JIR1: IrDA Connector (Optional for Ver 3.x only)

The motherboard has a Infrared header that supports infrared signal

transmitting and receiv ing dev ice.

Assignment

1 +5V

2 IRTX

3 Ground

4 IRRX

IR(optional)

ATX Power Source Connector: JATXPWR1

JATXPWR1 allows user to connect 24-pin power connector on the ATX power

supply.

12 24

Pin Assignment Pin Assignment

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS_ON

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PW_OK 20 NC

9 Standby Voltage+5V 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

Motherboard Manual

JATXPW R2: ATX Powe r Sou rce C onne ctor

By connecting this connector, it will provide +12V to CPU power circuit.

Assignment

1 +12V

2 +12V

3 Ground

4 Ground

JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC f ront panel,

and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

JUSB3 JUSB2

JUSB2 JUSB3

10 NC

GeForce 6100 AM2

JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at JUSBLAN1.

JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3).

Pin 2-3 Close:

JUSBV1: USB ports at JUSBLAN1 are powered by +5V standby voltage.

JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V

standby v oltage.

Pin 1-2 close

JUSBV1

JUSBV2

JUSBV1

JUSBV2

Pin 2-3 close

Note:

In order to support this function “Power-On s ystem vi a USB devic e,” “JUSBV1/ JUSBV2”

jumper cap should be plac ed on Pin 2-3 indi viduall y.

Motherboard Manual

JFAUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC f ront

panel. It will disable the output on back panel audio connectors.

Pin Assignment

1 Mic in/center

2 Ground

3 Mic power/Bass

4 Audio power

5 Right line out/

Speaker out Right

6 Right line out/

Speaker out Right

7 Reserved

8 Key

9 Left line out/

Speaker out Left

10 Left line out/

Speaker out Left

11 Right line in/

Rear speaker Right

12 Right line in/

Rear speaker Right

13 Left line in/

Rear speaker Left

14 Left line in/

Rear speaker Left

JCDIN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source f rom the v ariaty dev ices,

like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Assignment

1 Left Channel

Input

2 Ground

3 Ground

4 Right Channel

Input

GeForce 6100 AM2

JCMOS1: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting

and the CMOS data, please carefully f ollow the procedures to avoid damaging

the motherboard.

Pin 1-2 Close:

Normal Operation (default).

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remov e AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset y our desired password or clear the CMOS data.

JCI1: Chassis O pen Heade r (optional)

This connector allows system to monitor PC case open status. If the signal has

been triggered, it will record to the CMOS and show the message on next

boot-up.

Assignment

1 Case open signal

2 Ground

Motherboard Manual

JSATA1~JSATA2: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,

it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

714

JSATA2

JSATA1

7 Ground

JSPDIF_O UT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

Assignment

1 +5V

2 SPDIF_OUT

3 Ground

GeForce 6100 AM2

Power Source Selection Headers for Keyboard/Mouse: JKBMSV1

(Only for Ver 3.x)

Pin 1-2 Close:

JKBMSV1: +5V for PS/2 key board and mouse。

Pin 2-3 Close:

JKBMSV1: PS/2 keyboard and mouse are powered with +5V standby

v oltage.

Pin 1-2 close

Pin 2-3 close

Header to adjust Memory Voltage: JDDR_II>2.2V (Only for Ver 3.x)

When adjusting Memory Voltage, please place the jumper to pin2-3 Closed. The

Def ault setting is Pin 1-2 Closed.

Pin 1-2 Cl ose:

Memory Voltage

controll ed by BIOS

(default).

Pin 2-3 Cl ose:

Memory voltage

Overclocking

Note:

1. When “JDDR_II>2.2V” jumper cap is placed on Pin 1-2, memory v oltage

can be manually adjusted under CMOS setup.

2. When “JDDR_II>2.2V” jumper cap is placed on Pin 2-3, memory v oltage

will be f ixed at 2.2V automatically, and can’t be adjusted under COMS

setup.

Bef ore setting memory v oltage ov erclocking, please ensure that y our DDRII

memory modules are able to support 2.2V. (Consulting your DDR supplier)

Motherboard Manual

On-Board LED Indicators (Only for Ver 3.x)

There are 2 LED indicators on the motherboard to show system status.

LED

LED_D1 and LED_D2:

These 2 LED indicate system power on diagnostics.

Please ref er to the table below for different messages:

LED_D1 LED_D2 Message

ON ON Normal

ON OFF VGA Error

OFF ON Memory Error

OFF OFF Abnorma l: CPU / Chipset error.

On-Board Buttons (Optional for Ver 3.x only)

There are 2 on-board buttons.

PWRSW1

RSTSW2

PWRSW1:

This is an on-board Power On/Off button.

RSTSW2:

This is an on-board Reset button.

GeForce 6100 AM2

JPRNT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

2 -ALF 15 Data 6

3 Data 0 16 Ground

4 -Error 17 Data 7

5 Data 1 18 Ground

6 -Init 19 -ACK

7 Data 2 20 Ground

8 -Scltin 21 Busy

9 Data 3 22 Ground

10 Ground 23 PE

11 Data 4 24 Ground

12 Ground 25 SCLT

13 Data 5

Motherboard Manual

CHAPTER 4: NVIDIA RAID FUNCTIONS

4.1 OPERATION SYSTEM

z Supports Windows XP Home/Prof essional Edition, and Windows 2000 Prof essional.

4.2 RAID ARRAYS

NVRAID supports the f ollowing ty pes of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

4.3 HOW RAID WORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks

up a large file into smaller blocks and performs disk reads and writes across multiple

drives in parallel. The size of each block is determined by the stripe size parameter,

which you set during the creation of the RAID set based on the system environment. This

technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

 Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the

platf orm.

 Uses: Intended for non-critical data requiring high data throughput, or any

env ironment that does not require f ault tolerance.

 Benefits: prov ides increased data throughput, especially f or large files. No

capacity loss penalty f or parity.

 Drawbacks: Does not deliver any fault tolerance. If any drive in the array

f ails, all data is lost.

 Fault Tolerance: No.

Bloc k 1

Block 3

Block 5

Block 2

Block 4

Block 6

GeForce 6100 AM2

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1

array system. The mirrored (backup) copy of the data can reside on the same disk or on

a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if

the active volume or drive is corrupted or becomes unavailable because of a hardware

failure.

RAID techniques can be applied for high-availability solutions, or as a form of

automatic backup that eliminates tedious manual backups to more expensive and less

reliable media.

Features and Benefits

 Drives: Minimum 2, and maximum is 2.

 Uses: RAID 1 is ideal for small databases or any other application that

requires f ault tolerance and minimal capacity.

 Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the

controller switches to the other drive.

 Drawbacks: Requires 2 driv es for the storage space of one driv e.

Perf ormance is impaired during driv e rebuilds.

 Fault Tolerance: Yes.

Bloc k 1

Block 2

Block 3

Block 1

Block 2

Block 3

※ For more detailed setup information, please refer to the Driver CD, or go to

http://www.nvidia.com/page/pg_20011106217193.html to download NVIDIA nForce Tutorial Flash.

Motherboard Manual

CHAPTER 5: USEFUL HELP

5.1 DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup

Driver CD into your optical drive and install the driver for better system

performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up aft er you ins ert the Driver CD, ple ase use file brows er to

locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will

list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide

will list the software available for your system, click on each software title

to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver

CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version

of Acrobat Reader software from

http://www.adobe.com/products/acrobat/readstep2.html

GeForce 6100 AM2

5.2 AWARD BIOS BEEP CODE

Beep Sound Meaning

One long beep followed by two short

beeps Video card not found or v ideo card

memory bad

High-low siren sound CPU overheated

System will shut down automatically

One Short beep when system boot-up No error found during POST

Long beeps every other second No DRAM detected or install

5.3 EXT RA INFORMATION

A. BIOS Update

After you fail to update BIOS or BIOS is invaded by virus, the

Boot-Block function will help to restore BIOS. If the following message

is shown after boot-up the system, it means the BIOS contents are

corrupted.

In this Case, please follow the procedure below to restore the BIOS:

1. Make a bootable floppy disk.

2. Download the Flash Utility “AWDFLASH.exe” from the Biostar

website: www.biostar.com.tw

3. Confirm motherboard model and download the respectively BIOS

from Biostar website.

4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.

5. Insert the bootable disk into floppy drive and press Enter.

6. System will boot-up to DOS prompt.

7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt.

(xxxx means BIOS name.)

8. System will update BIOS automatically and restart.

9. The BIOS has been recovered and will work properly.

Motherboard Manual

B. CPU Overheated

If the system shutdown automatically after power on system for

seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown

automatically to avoid a damage of the CPU, and the system may not

power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU

0protection function.

1. Remove the power cord from power supply for seconds.

2. Wa i t fo r second s.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wa i t fo r second s.

3. Power on the system again.

GeForce 6100 AM2

5.4 TROUBLESHOOTING

Probable Solution

1. No power to the system at all

Power light don’t illuminate, f an

inside power supply does not turn

on.

2. Indicator light on key board does

not turn on.

1. Make sure power cable is

securely plugged in.

2. Replace cable.

3. Contact technical support.

System inoperativ e. Keyboard lights

are on, power indicator lights are lit,

and hard driv e is spinning.

Using even pressure on both ends of

the DIMM, press down firmly until the

module snaps into place.

System does not boot from hard disk

driv e, can be booted f rom optical driv e. 1. Check cable running from disk to

disk controller board. Make sure

both ends are securely plugged

in; c hec k t he driv e ty pe in t he

standard CMOS setup.

2. Backing up the hard drive is

extremely important. All hard

disks are capable of breaking

down at any time.

System only boots f rom optical driv e.

Hard disk can be read and applications

can be used but booting from hard disk

is impossible.

1. Back up data and applications

files.

2. Ref ormat the hard driv e.

Re-install applications and data

using backup disks.

Screen message says “Invalid

Conf iguration” or “CMOS Failure.” Rev iew system’s equipment. Make sur

correct inf ormation is in setup.

Cannot boot system after installing

second hard driv e. 1. Set master/slave jumpers

correctly.

2. Run SETUP program and select

correct driv e types. Call the drive

manuf acturers f or compatibility

with other drives.

Motherboard Manual

CHAPTER 6: WARPSPEEDER™

6.1 INTRODUCTION

[WarpSpeeder™], a new powerful control utility, features three

user-friendly functions including Overclock Manager, Overvoltage

Manager, and Hardware Monitor.

With the Overclock Manager, users can easily adjust the frequency they

prefer or they can get the best CPU performance with just one click. The

Overvoltage Manager, on the other hand, helps to power up CPU core

voltage and Memory voltage. The cool Hardware Monitor smartly indicates

the temperatures, voltage and CPU fan speed as well as the chipset

information. Also, in the About panel, you can get detail descriptions about

BIOS model and chipsets. In addition, the frequency status of CPU,

memory, AGP and PCI along with the CPU speed are synchronically

shown on our main panel.

Moreover, to protect users' computer systems if the setting is not

appropriate when testing and results in system fail or hang,

[WarpSpeeder™] technology assures the system stability by automatically

rebooting the computer and then restart to a speed that is either the

original system speed or a suitable one.

6.2 SYSTEM REQUIREMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP

DirectX: DirectX 8.1 or above. (The Windows XP operating system

includes DirectX 8.1. If you use Windows XP, you do not need to install

DirectX 8.1.)

GeForce 6100 AM2

6.3 INSTALLATION

1. Execute the setup execution file, and then the following dialog will pop

up. Please click “Next” button and follow the default procedure to

install.

2. When you see the following dialog in setup procedure, it means setup

is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox

is checked, the Tray Icon utility and [WarpSpeeder™] utility will be

automatically and immediately launched after you click “Finish”

button.

Usage:

The following figures are just only for reference, the screen printed in

this user manual will change according to your motherboard on hand.

Motherboard Manual

6.4 WARPSPEEDER™

1. Tray Icon:

Whenever the Tray Icon utility is launched, it will display a little tray

icon on the right side of Windows Taskbar.

This utility is responsible for conveniently invoking [WarpSpeeder™]

Utility. You can use the mouse by clicking the left button in order to

invoke [WarpSpeeder™] directly from the little tray icon or you can

right-click the little tray icon to pop up a popup menu as following

figure. The “Launch Utility” item in the popup menu has the same

function as mouse left-click on tray icon and “Exit” item will close

Tray Icon utility if selected.

GeForce 6100 AM2

2. Main Panel

If you click the tray icon, [WarpSpeeder™] utility will be invoked.

Please refer to the following figure; the utility’s first window you will

see is Main Panel.

Main Panel contains features as follows:

a. Di spl ay the CPU Sp ee d, CPU external cl o ck, M em ory clo ck, AGP cl ock,

and PCI clock information.

b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for

invoking respective panels.

c. With a user-friendly Status Animation, it can represent 3 overclock

percentage stages:

Man walking→overclock percentage from 100% ~ 110 %

Panther running→overclock percentage from 110% ~ 120%

Car racing→overclock percentage from 120% ~ above

Motherboard Manual

3. Voltage Panel

Click the Voltage button in Main Panel, the button will be highlighted

and the Voltage Panel will slide out to up as the following figure.

In this panel, you can decide to increase CPU core voltage and

Memory voltage or not. The default setting is “No”. If you want to get

the best performance of overclocking, we recommend you click the

option “Yes”.

GeForce 6100 AM2

4. Overclock Panel

Click the Overclock button in Main Panel, the button will be

highlighted and the Overclock Panel will slide out to left as the

following figure.

Overclock Panel contains the these features:

a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”:

provide user the ability to do real-time overclock adjustment.

Warning:

Manually overclock is potentially dangerous, especially when the

ov erclocking percentage is over 110 %. We strongly recommend you

v erify ev ery speed you overclock by click the Verify button. Or, you can

just click Auto ov erclock button and let [WarpSpeeder™] automatically

gets the best result f or y ou.

b. “Recovery Dialog button”: Pop up the following dialog. Let user select

a restoring way if system need to do a fail-safe reboot.

Motherboard Manual

c. “Auto-overclock button”: User can click this button and

[WarpSpeeder™] will set the best and stable performance and

frequency automatically. [WarpSpeeder™] utility will execute a

series of testing until system fail. Then system will do fail-safe

reboot by using Watchdog function. After reboot, the

[WarpSpeeder™] utility will restore to the hardware default

setting or load the verified best and stable frequency according

to the Recovery Dialog’s setting.

d. “Verify button”: User can click this button and [WarpSpeeder™]

will proceed a testing for current frequency. If the testing is ok,

then the current frequency will be saved into system registry. If

the testing fail, system will do a fail-safe rebooting. After reboot,

the [WarpSpeeder™] utility will restore to the hardware default

setting or load the verified best and stable frequency according

to the Recovery Dialog’s setting.

Note:

Because the testing programs, invoked in Auto-overclock and Verify,

include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or

newer runtime library is required. And please make sure y our display

card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is

required f or Direct3D rendering.

5. Hardware Monitor Panel

Click the Hardware Monitor button in Main Panel, the button will be

highlighted and the Hardware Monitor panel will slide out to left as

the following figure.

In this panel, you can get the real-time status information of your

system. The information will be refreshed every 1 second.

GeForce 6100 AM2

6. About Panel

Click the “about” button in Main Panel, the button will be highlighted

and the About Panel will slide out to up as the following figure.

In this panel, you can get model name and detail information in hints

of all the chipset that are related to overclocking. You can also get

the mainboard’s BIOS model and the Version number of

[WarpSpeeder™] utility.

Note :

Because the overclock, overvoltage, and hardware monitor features

are controlled by several separate chipset, [WarpSpeeder™] divide

these features to separate panels. If one chipset is not on board, the

correlative button in Main panel will be disabled, but will not interfere

other panels’ functions. This property can make [WarpSpeeder™]

utility more robust.

Motherboard Manual

APPENDENCIES: SPEC IN OTHER LANGUAGE

GERMAN

Ver 3.x Ver 1.x

CPU

Sockel AM2

AMD Athlon 64 / Athlon 64 FX / Sempron

Prozessoren

Die AMD 64-Architektur unterstützt eine 32-Bit-

und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport und Cool’n’Quiet

Sockel AM2

AMD Athlon 64 / Athlon 64 FX / Sempron

Prozessoren

Die AMD 64-Architektur unterstützt eine 32-Bit-

und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport und Cool’n’Quiet

FSB Unterstützt HyperTransport mit einer Bandbreite

von bis z u 1000 MHz

Unterstützt HyperTransport mit einer Bandbreite

von bis z u 1000 MHz

Chipsatz GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Super E/A

ITE 8712F / 8716F

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller

"Smart Guardian"-Funktion von ITE

ITE 8712F / 8716F

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller

"Smart Guardian"-Funktion von ITE

Arbeitsspeich

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterstützt 256/512MB & 1GB

DDR2.

M ax. 4GB A rbeit ss peic her

Dual-Kanal DDR2 Speichermodul

Unterstützt DDR2 400 / 533 / 667 / 800

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterstützt 256/512MB & 1GB

DDR2.

M ax. 4GB A rbeit ss peic her

Dual-Kanal DDR2 Speichermodul

Unterstützt DDR2 400 / 533 / 667 / 800

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Grafik

Integrierter Geforce 6100-Chipsatz

Max. 256 MB gemeinsam benutzter

Videospeicher

Integrierter Geforce 6100-Chipsatz

Max. 256 MB gemeinsam benutzter

Videospeicher

IDE

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

SA TA II

I nt e gr i ert e r S e ri al ATA - Con tr oll e r

Datentransferrate bis zu 3Gb/s

Konform mit der SATA-Spezifikation Version 2.0.

I nt e gr i ert e r S e ri al ATA - Con tr oll e r

Datentransferrate bis zu 3Gb/s

Konform mit der SATA-Spezifikation Version 2.0.

LAN Realtek 8100C

10 / 100 Mb/s Auto-Negotiation

Realtek 8201CL PHY

10 / 100 Mb/s Auto-Negotiation

GeForce 6100 AM2

Ver 3.x Ver 1.x

Audio-Codec

ALC 850

8-Kanal-Audioausgabe

AC’97 Version 2.3

ALC 655 / 658 (optional)

6-Kanal-Audioausgabe

AC’97 Version 2.3

PCI-Steckplatz x2 PCI-Steckplatz x2

PCI Express x16 Steckplatz x1 PCI Express x16 Steckplatz x1

Steckplätze

PCI Express x 1-Steckplatz x1 PCI Express x 1-Steckplatz x1

Diskettenlaufw erkansc hluss x1 Diskett enlaufw erkansc hluss x1

Druc keransc hluss Ansc hluss x1 Druc keransc hluss A nsc hluss x1

IDE-Ansc hluss x2 IDE-Ansc hluss x2

SATA-Anschluss x2 SATA-Anschluss x2

Fronttafelanschluss x1 Fronttafelanschluss x1

Front-A udioansc hluss x1 Front -Audioansc hluss x1

CD-IN-Ansc hluss x1 CD-IN-Ansc hluss x1

S/PDIF-Ausgangsanschluss x1 S/PDIF-Ausgangsanschluss x1

CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1

System-Lüfter-Sockel x3 System-Lüfter-Sockel x1

"Gehäuse offen"-Sockel (optional) x1 "Gehäuse offen"-Sockel (optional) x1

"CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1

USB-Ansc hluss x2 USB-Ansc hluss x2

Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1

Onboard-Ans

chluss

Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1

Rückseiten-E

PS/2-Tastatur x1

PS/2-Maus x1

Serieller Ansc hluss x1

VGA-Anschluss x1

LA N-A nsc hluss x1

USB-Ansc hluss x4

Audioansc hluss x6

PS/2-Tastatur x1

PS/2-Maus x1

Serieller Ansc hluss x1

VGA-Anschluss x1

LA N-A nsc hluss x1

USB-Ansc hluss x4

Audioansc hluss x3

Platinengröße

. 244 mm (B) X 244 mm (L) 210 mm (B) X 244 mm (L)

Sonderfunkti

onen

NVIDIA nTunes

Unterstützt RAID 0 / 1

NVIDIA nTunes

Unterstützt RAID 0 / 1

OS-Unterstüt

zung

Windows 2K / XP

Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu

entfernen.

Windows 2K / XP

Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu

entfernen.

Motherboard Manual

FRANCE

Ver 3.x Ver 1.x

Socket AM2

Process eurs AMD At hlon 64 / At hl on 64 FX /

Sempron

L'architecture AMD 64 permet le calcul 32 et 64

bits

Prend en charge Hy

er Tr a ns

ort et Cool’n’

uiet

Socket AM2

Process eurs AMD At hlon 64 / At hl on 64 FX /

Sempron

L'architecture AMD 64 permet le calcul 32 et 64

bits

Prend en char

e H

er Tr a ns

ort et Cool’n’

uiet

Bus frontal Prend en charge Hyper Transport jusqu'à une

bande passante de 1000 MHz

Prend en charge Hyper Transport jusqu'à une

bande passante de 1000 MHz

Chipset GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Graphiques Integré dans la c hipset GeForce 6100

Mémoire vidéo partagée maximale de 256 Mo

Integré dans la chipset GeForce 6100

Mémoire vidéo partagée maximale de 256 Mo

Super E/S

ITE 8712F / 8716F

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

ITE 8712F / 8716F

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Mémoire

principale

Fentes DDR2 DIMM x 4

Chaque DIMM prend en charge des DDR2 de

256/512 Mo et 1Go

Capacité mémoire maximale de 4 Go

Module de mémoire DDR2 à mode à double voie

Prend en charge la DDR2 400 / 533 / 667 / 800

Les DIMM à registres et DIMM avec code

correcteurs d'erreurs ne sont pas prises en

charge

Fentes DDR2 DIMM x 4

Chaque DIMM prend en charge des DDR2 de

256/512 Mo et 1Go

Capacité mémoire maximale de 4 Go

Module de mémoire DDR2 à mode à double voie

Prend en charge la DDR2 400 / 533 / 667 / 800

Les DIMM à registres et DIMM avec code

correcteurs d'erreurs ne sont pas prises en

charge

IDE

Contrôleur IDE intégré

Mode principale de Bus Ultra DMA 33 / 66 / 100 /

133

Prend en charge le mode PIO 0~4,

Contrôleur IDE intégré

Mode principale de Bus Ultra DMA 33 / 66 / 100 /

133

Prend en charge le mode PIO 0~4,

SA TA II

Cont rôl eur Serial ATA

intégré :

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

Cont rôl eur Serial ATA

intégré :

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

LAN Realtek 8100C

10 / 100 Mb/s négociation automatique

Realtek 8201CL PHY

10 / 100 Mb/s négociation automatique

GeForce 6100 AM2

Ver 3.x Ver 1.x

Codec audio

ALC 850

Sortie audio à 8 voies

AC’97 Version 2.3

ALC 655 / 658 (optional)

Sortie audio à 6 voies

AC’97 Version 2.3

Fente PCI x2 Fente PCI x2

Slot PCI Express x16 x1 Slot PCI Express x16 x1 Fentes

Slot PCI Express x 1 x1 Slot PCI Express x 1 x1

Connecteur de dis quette x1 Connec teur de disquette x1

Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1

Connecteur IDE x2 Connecteur IDE x2

Connec teur SATA x2 C onnect eur SATA x2

Connecteur du panneau avant x1 Connecteur du panneau avant x1

Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1

Connecteur d'entrée CD x1 Connecteur d'entrée CD x1

Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1

Embase de ventilateur UC x1 Embase de ventilateur UC x1

Embase de ventilateur système x3 Embase de ventilateur système x1

Embase d'ouverture de châssis x1

(optional)

Embase d'ouverture de châssis x1

(optional)

Embase d'effacement CMOS x1 Embase d'effacement CMOS x1

Connecteur USB x2 Connecteur USB x2

Connecteur d'alimentation x1

(24 broc hes)

Connecteur d'alimentation x1

(24 broc hes)

Connecteur

embarqué

Connecteur d'alimentation x1

(4 broches)

Connecteur d'alimentation x1

(4 broches)

E/S du

panneau

arrière

Clavier PS/2 x1

Souris PS/2 x1

Port série x1

Port VGA x1

Port LAN x1

Port USB x4

Fiche audio x6

Clavier PS/2 x1

Souris PS/2 x1

Port série x1

Port VGA x1

Port LAN x1

Port USB x4

Fiche audio x3

Dimensions

de la carte 244 mm (l) X 244 mm (H) 210 mm (l) X 244 mm (H)

Fonctionnali

tés

spéciales

NVIDIA nTunes

Prise en charge RAID 0 / 1

NVIDIA nTunes

Prise en charge RAID 0 / 1

Support SE

Windows 2K / XP

Biostar se réserve le droit d'ajouter ou de

supprimer le support de SE avec ou sans préavis.

Windows 2K / XP

Biostar se réserve le droit d'ajouter ou de

supprimer le support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN

Ver 3.x Ver 1.x

CPU

Socket AM2

Processori AMD Athlon 64 / Athlon 64 FX /

Sempron

L’architettura AMD 64 abilita la

computazione 32 e 64 bit

Supporto di Hyper Tra nsport e Cool’ n’

uiet

Socket AM2

Processori AMD Athlon 64 / Athlon 64 FX /

Sempron

L’architettura AMD 64 abilita la

computazione 32 e 64 bit

orto di H

er Tra ns

ort e Cool’ n’

uiet

FSB Supporto di Hyper Transp ort fi no a 1000

MHz di lar ghezza di ba nda

Supporto di Hyper Transp ort fi no a 1000

MHz di lar ghezza di ba nda

Chipset GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Grafica

Integrata nel Chi pset GeForce 6100

La memoria vi deo condivisa massima è di

256MB

Integrata nel Chi pset GeForce 6100

La memoria vi deo condivisa massima è di

256MB

Super I/O

ITE 871 2F / 87 16F

Fornisce le funzionalità legacy Super I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart G uardi an" di I TE

ITE 871 2F / 87 16F

Fornisce le funzionalità legacy Super I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart G uardi an" di I TE

Memoria

principale

Alloggi DIMM DDR 2 x 4

Ciascun DIMM su

orta D DR2 2 56

51 2MB e

1GB

Capacità massima della memoria 4GB

Modulo di memoria D DR2 a can ale dop pio

Supporto di DDR2 400 / 533 / 667 / 800

DIMM registrati e DIMM ECC non sono

supportati

Alloggi DIMM DDR 2 x 4

Ciascun DIMM su

orta D DR2 2 56

51 2MB e

1GB

Capacità massima della memoria 4GB

Modulo di memoria D DR2 a can ale dop pio

Supporto di DDR2 400 / 533 / 667 / 800

DIMM registrati e DIMM ECC non sono

supportati

IDE

Controller IDE integrato

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 13 3

Supporto modalità PIO Mode 0- 4

Controller IDE integrato

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 13 3

Supporto modalità PIO Mode 0- 4

SATA II

Controller Serial ATA inte grato

Velocità di trasferimento dei dati fi no a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

Controller Serial ATA inte grato

Velocità di trasferimento dei dati fi no a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

LAN Realtek 81 00C

Negoziazione automatic a 10 / 100 Mb /s

Realtek 82 01CL PHY

Negoziazione automatic a 10 / 100 Mb /s

GeForce 6100 AM2

Ver 3.x Ver 1.x

Codec

audio

ALC 850

Uscita audio 8 canali

AC’97 Versione 2.3

ALC 655 / 65 8(o ptional)

Uscita audio 6 canali

AC’97 Versione 2.3

Alloggio PCI x2 Alloggio PCI x2

Alloggio PCI Ex press x1 6 x1 Alloggio PCI Ex press x1 6 x1 Alloggi

Alloggio PCI Ex press x1 x1 Alloggio PCI Ex press x1 x1

Connettore flo ppy x1 Connettore flo ppy x1

Connettore Porta stampa nte x1 Connettore Porta s tampa nte x1

Connettore IDE x2 Connettore IDE x2

Connettore SATA x2 Connettore SATA x2

Connettore pa nnello fro ntale x1 Connettore pa nnello fro ntale x1

Connettore audio frontale x1 Connettore audio frontale x1

Connettore CD-in x1 Connettore CD-in x1

Connettore output SPDIF x1 Connettore output SPDIF x1

Collettore ventolina CPU x1 Collettore ventolina CPU x1

Collettore ventolina sistema x3 Collettore ventolina sistema x1

Collettore apertur a telaio x1

(optional)

Collettore apertur a telaio x1

(optional)

Collettore cancellazione CMOS x1 Collettore cancellazione CMOS x1

Connettore USB x2 Connettore USB x2

Connettore alimentazione x1

(24 pin)

Connettore alimentazione x1

(24 pin)

Connettori

su scheda

Connettore alimentazione x1

(4 pi n)

Connettore alimentazione x1

(4 pi n)

I/O

pannello

posteriore

Ta s t i e r a P S / 2 x 1

Mouse PS/2 x1

Porta seriale x1

Porta VGA x1

Porta LAN x1

Porta USB x4

Connettore au dio x6

Ta s t i e r a P S / 2 x 1

Mouse PS/2 x1

Porta seriale x1

Porta VGA x1

Porta LAN x1

Porta USB x4

Connettore au dio x3

Dimension

i scheda 24 4 mm (largh ez za) x 24 4 mm (altezza) 210 mm (largh ez za) x 24 4 mm (altezza)

Caratterist

iche

speciali

nTu nes NVI DIA

Supporto RAID 0 / 1

nTu nes NVI DIA

Supporto RAID 0 / 1

Sistemi

operativi

supportati

Windows 2K / XP

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo se nza pre avviso.

Windows 2K / XP

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo se nza pre avviso.

Motherboard Manual

SPANISH

Ver 3.x Ver 1.x

CPU

Conector AM2

Procesadores AMD Athlon 64 / Athlon 64 FX /

Sempron

La arquitectura AMD 64 permite el procesado de

32 y 64 bits

Soporta las tecnologías Hyper Transport y

Cool’n’Quiet

Conector AM2

Procesadores AMD Athlon 64 / Athlon 64 FX /

Sempron

La arquitectura AMD 64 permite el procesado de

32 y 64 bits

Soporta las tecnologías Hyper Transport y

Cool’n’Quiet

FSB Admite HyperTransport con un ancho de banda

de hasta 1000 MHz

Admite HyperTransport con un ancho de banda

de hasta 1000 MHz

Conjunto de

chips

GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Gráficos

Integrados en el conjunto de chips GeForce 6100

Memoria máxima de vídeo compartida de 256

Integrados en el conjunto de chips GeForce 6100

Memoria máxima de vídeo compartida de 256

Súper E/S

ITE 8712F / 8716F

Le ofrece las funcionalidades heredadas de uso

más común Súper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de ITE

ITE 8712F / 8716F

Le ofrece las funcionalidades heredadas de uso

más común Súper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de ITE

Memoria

principal

Ranuras DIMM DDR2 x 4

Cada DIMM admite DDR de 256/512MB y 1GB

Capacidad máxima de memoria de 4GB

Módulo de memoria DDR2 de canal Doble

Admite DDR2 de 400 / 533 / 667 / 800

No admite DIMM registrados o DIMM

compatibles con ECC

Ranuras DIMM DDR2 x 4

Cada DIMM admite DDR de 256/512MB y 1GB

Capacidad máxima de memoria de 4GB

Módulo de memoria DDR2 de canal Doble

Admite DDR2 de 400 / 533 / 667 / 800

No admite DIMM registrados o DIMM

compatibles con ECC

IDE

Controlador IDE integrado

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

Soporte los Modos PIO 0~4,

Controlador IDE integrado

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

Soporte los Modos PIO 0~4,

SA TA II

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3 Gb/s.

Compatible con la versión SATA 2.0.

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3 Gb/s.

Compatible con la versión SATA 2.0.

Red Local Realtek 8100C

Negociación de 10 / 100 Mb/s

Realtek 8201CL PHY

Negociación de 10 / 100 Mb/s

GeForce 6100 AM2

Ver 3.x Ver 1.x

Códecs de

sonido

ALC 850

Salida de sonido de 8 canales

AC’97 Versión 2.3

ALC 655 / 658 (opcional)

Salida de sonido de 6 canales

AC’97 Versión 2.3

Ranura PCI X2 Ranura PCI X2

Ranura PCI Express x16 X1 Ranura PCI Express x16 X1 Ranuras

Ranura PCI express x 1 X1 Ranura PCI express x 1 X1

Conector disco flexible X1 Conector disco flexible X1

C o nec t or P uer t o de im pr es or a X 1 C o nec t or P uer t o de im pr es or a X 1

Conector IDE X2 Conector IDE X2

Conect or SATA X2 Conec tor SATA X2

Conector de panel frontal X1 Conector de panel frontal X1

Conector de sonido frontal X1 Conector de sonido frontal X1

Conector de entrada de CD X1 Conector de entrada de CD X1

Conector de salida S/PDIF X1 Conector de salida S/PDIF X1

Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1

Cabecera de ventilador de sistema X3 Cabecera de ventilador de sistema X1

Cabecera de chasis abierto(opcional)X1 Cabecera de chasis abierto(opcional)X1

Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1

Conector USB X2 Conector USB X2

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(24 patillas)

Conectores

en placa

Conector de alimentación X1

(4 patillas)

Conector de alimentación X1

(4 patillas)

Panel

trasero de

E/S

Te c l ad o P S/ 2 X 1

Ratón PS/2 X1

Puerto serie X1

Puerto VGA X1

Puerto de red local X1

Puerto USB X4

Conector de sonido X6

Te c l ad o P S/ 2 X 1

Ratón PS/2 X1

Puerto serie X1

Puerto VGA X1

Puerto de red local X1

Puerto USB X4

Conector de sonido X3

Ta m a ñ o d e

la placa 244 mm. (A) X 244 Mm. (H) 210mm. (A) X 244 Mm. (H)

Funciones

especiales

NVIDIA nTunes

Admite RAID 0 / 1

NVIDIA nTunes

Admite RAID 0 / 1

Soporte de

sistema

operativo

Windows 2K / XP

Biostar se reserva el derecho de añadir o retirar

el soporte de cualquier SO con o sin aviso previo.

Windows 2K / XP

Biostar se reserva el derecho de añadir o retirar

el soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE

Ver 3.x Ver 1.x

CPU

Socket AM2

Processadores AMD Athlon 64 / Athlon 64 FX /

Sempron A arquitectura AMD 64 permite uma

computação de 32 e 64 bits

Suporta as tecnologias Hyper Transport e

Cool’n’Quiet

Socket AM2

Processadores AMD Athlon 64 / Athlon 64 FX /

Sempron A arquitectura AMD 64 permite uma

computação de 32 e 64 bits

Suporta as tecnologias Hyper Transport e

Cool’n’Quiet

FSB Suporta a tecnologia HyperTransport com uma

largura de banda até 1000 MHz

Suporta a tecnologia HyperTransport com uma

largura de banda até 1000 MHz

Chipset GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Placa

gráfica

Integrada no chipset GeForce 6100

Memória de vídeo máxima partilhada: 256 MB

Integrada no chipset GeForce 6100

Memória de vídeo máxima partilhada: 256 MB

Es pec i ficaçã

o Super I/O

ITE 8712F / 8716F

Proporciona as funcionalidades mais utilizadas

em termos da especificação Super I/O.

Interface LPC (Low Pin Count).

Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador da velocidade da ventoinha

Função "Smart Guardian" da ITE

ITE 8712F / 8716F

Proporciona as funcionalidades mais utilizadas

em termos da especificação Super I/O.

Interface LPC (Low Pin Count).

Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador da velocidade da ventoinha

Função "Smart Guardian" da ITE

Memória

principal

Ranhuras DIMM DDR2 x 4

Cada módulo DIMM suporta uma memória

DDR2 de 256/512 MB & 1 GB

Capacidade máxima de memória: 4 GB

Módulo de memória DDR2 de canal duplo

Suporta módulos DDR2 400 / 533 / 667 / 800

Os módulos DIMM registados e os DIMM ECC

não são suportados

Ranhuras DIMM DDR2 x 4

Cada módulo DIMM suporta uma memória

DDR2 de 256/512 MB & 1 GB

Capacidade máxima de memória: 4 GB

Módulo de memória DDR2 de canal duplo

Suporta módulos DDR2 400 / 533 / 667 / 800

Os módulos DIMM registados e os DIMM ECC

não são suportados

IDE

Controlador IDE integrado

Modo Bus master Ultra DMA 33 / 66 / 100 / 133

Suporta o modo PIO 0~4,

Controlador IDE integrado

Modo Bus master Ultra DMA 33 / 66 / 100 / 133

Suporta o modo PIO 0~4,

SA TA II

Controlador Serial ATA integrado

Velocidades de transmissão de dados até 3 Gb/s.

Compatibilidade com a especificação SATA

v e rs ã o 2. 0.

Controlador Serial ATA integrado

Velocidades de transmissão de dados até 3 Gb/s.

Compatibilidade com a especificação SATA

v e rs ã o 2. 0.

LAN Realtek 8100C

Auto negociação de 10 / 100 Mb/s

Realtek 8201CL PHY

Auto negociação de 10 / 100 Mb/s

GeForce 6100 AM2

Ver 3.x Ver 1.x

Codec de

som

ALC 850

Saída de áudio de 8 canais

AC’97 Vers ão 2. 3

ALC 655 / 658 (opcional)

Saída de áudio de 6 canais

AC’97 Vers ão 2. 3

Ranhura PCI x2 Ranhura PCI x2

Ranhura PCI Express x16 x1 Ranhura PCI Express x16 x1 Ranhuras

Ranhura PCI Express x 1 x1 Ranhura PCI Express x 1 x1

Conector da unidade de disquetes x1 Conector da unidade de disquetes x1

Conector da para impressora x1 Conector da para impressora x1

Conector IDE x2 Conector IDE x2

Conect or SATA x2 Conect or SATA x2

Conector do painel frontal x1 Conector do painel frontal x1

Conec tor de áudio frontal x1 Conector de áudio frontal x1

Conector para entrada de CDs x1 Conector para entrada de CDs x1

Conector de saída S/PDIF x1 Conector de saída S/PDIF x1

Conec tor da ventoinha da CPU x1 Conec tor da ventoinha da CPU x1

Conector da ventoinha do sistema x3 Conector da ventoinha do sistema x1

Conector para detecção da

abertura do chassis (opcional) x1

Conector para detecção da

abertura do chassis (opcional) x1

Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1

Conector USB x2 Conector USB x2

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(24 pinos)

Conectores

na plac a

Conector de alimentação x1

(4 pinos)

Conector de alimentação x1

(4 pinos)

Entradas/S

aídas no

painel

traseiro

Te c l ad o P S/ 2 x 1

Rato PS/2 x1

Po rt a sé ri e x1

Porta VGA x1

Porta LAN x1

Porta USB x4

Tomada de áudio x6

Te c l ad o P S/ 2 x 1

Rato PS/2 x1

Po rt a sé ri e x1

Porta VGA x1

Porta LAN x1

Porta USB x4

Tomada de áudio x3

Tamanho

da placa 244 mm (L) X 244 mm (A) 210 mm (L) X 244 mm (A)

Característi

cas

especiais

nTunes da NVIDIA

Suporta as funções RAID 0 / 1

nTunes da NVIDIA

Suporta as funções RAID 0 / 1

Sistemas

operativos

suportados

Windows 2K / XP

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema

operativo com ou sem aviso prévio.

Windows 2K / XP

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema

operativo com ou sem aviso prévio.

Motherboard Manual

POLISH

Ver 3.x Ver 1.x

Procesor

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Sempron

Procesory

Architektura AMD 64 umożliwia przetw arzanie

32 i 64 bitowe

Obsługa Hyper Transport oraz Cool’n’Quiet

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Sempron

Procesory

Architektura AMD 64 umożliwia przetw arzanie

32 i 64 bitowe

Obsługa Hyper Transport oraz Cool’n’Quiet

FSB Obsługa HyperTransport o szerokości pasma do

1000 MHz

Obsługa HyperTransport o szerokości pasma do

1000 MHz

Chipset GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Grafika

Zintegrowana w chipsecie GeForce 6100

Maks. wielkość ws półdzielonej pamięci video

wynosi 256MB

Zintegrowana w chipsecie GeForce 6100

Maks. wielkość ws półdzielonej pamięci video

wynosi 256MB

Pamięć

główna

Gniazda DDR2 DIMM x 4

Każde gniazdo DIMM obsługuje moduły

256/512MB oraz 1GB DDR2

Maks. wielkość pa mi ęci 4GB

Moduł pamięci DDR2 z trybem podwójnego

kanału

Obsługa DDR2 400 / 533 / 667 / 800

Brak obsługi Registered DIMM oraz ECC DIMM

Gniazda DDR2 DIMM x 4

Każde gniazdo DIMM obsługuje moduły

256/512MB oraz 1GB DDR2

Maks. wielkość pa mi ęci 4GB

Moduł pamięci DDR2 z trybem podwójnego

kanału

Obsługa DDR2 400 / 533 / 667 / 800

Brak obsługi Registered DIMM oraz ECC DIMM

Super I/O

ITE 8712F / 8716F

Zapewnia najbardziej powszechne funkc je Super

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "Smart Guardian"

ITE 8712F / 8716F

Zapewnia najbardziej powszechne funkc je Super

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "Smart Guardian"

IDE

Z i nt e g ro w an y k o nt r ol e r I D E

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

obsłu ga P IO t r y b 0~ 4,

Z i nt e g ro w an y k o nt r ol e r I D E

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

obsłu ga P IO t r y b 0~ 4,

SA TA II

Zintegrowany kontroler Serial ATA

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Zintegrowany kontroler Serial ATA

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

LAN

Realtek 8100C

10 / 100 Mb/s z automatyczną negocjacją

szybkości

Realtek 8201CL PHY

10 / 100 Mb/s z automatyczną negocjacją

szybkości

GeForce 6100 AM2

Ver 3.x Ver 1.x

Kodek

dźwiękowy

ALC 850

8 kanałow e w y jście audio

AC’97 w wersji 2.3

ALC 655 / 658 (opcja)

6 kanałow e w y jście audio

AC’97 w wersji 2.3

Gniazdo PCI x2 Gniazdo PCI x2

Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1 Gniazda

Gniazdo PCI Express x 1 x1 Gniazdo PCI Express x 1 x1

Złącz e napędu dyskietek x1 Złącz e napędu dyskietek x1

Złącze Port drukarki x1 Złącze Port drukarki x1

Złącz e IDE x2 Złącz e IDE x2

Złącz e SATA x2 Z łącz e SA TA x2

Złącze panela przedniego x1 Złącze panela przedniego x1

Przednie złą cz e audio x1 Przednie z łą cz e audio x1

Złącz e w ejścia CD x1 Z łącz e w ejścia C D x1

Złącz e w yjści a S /PDIF x1 Z łącz e w yjści a S /PDIF x1

Złącz e głów kowe w e nt yl at o r a pr oc es o ra x 1 Z łącze głów ko we w e nt yl at or a pr oc es o ra x 1

Złącz e główkowe wentylatora systemowego x3 Złącz e główkowe wentylatora systemowego x1

Złącz e głów kowe otw ar ci a

obudowy (opcja) x1

Złącz e głów kowe otw ar ci a

obudowy (opcja) x1

Złącz e głów kowe k as ow a ni a

CMOS x1

Złącz e głów kowe k as ow a ni a

CMOS x1

Złącz e USB x2 Z łącze US B x2

Złącze z as ilania (24 pinow e) x1 Z łącz e z as ilania (24 pinow e) x1

Złącz a

wbudowane

Złącze z as ilania (4 pinow e) x1 Złącz e z asilania (4 pinow e) x1

Back Panel

I/O

Klawiatura PS/2 x1

Mysz PS/2 x1

Port szeregowy x1

Port VGA x1

Port LAN x1

Port USB x4

Gniazdo audio x6

Klawiatura PS/2 x1

Mysz PS/2 x1

Port szeregowy x1

Port VGA x1

Port LAN x1

Port USB x4

Gniazdo audio x3

Wymiary

płyty 244 mm (S) X 244 mm (W) 210 mm (S) X 244 mm (W)

Funkcje

specjalne

NVIDIA nTunes.

Obsługa RAID 0 / 1

NVIDIA nTunes.

Obsługa RAID 0 / 1

Obsluga

systemu

operacyjne

Windows 2K / XP

Biostar z astrz ega s obie praw o dodawania lub

odwoływania obsługi dowolnego systemu

o pe r ac y j ne go b e z powi a d om i e ni a.

Windows 2K / XP

Biostar z astrz ega s obie praw o dodawania lub

odwoływania obsługi dowolnego systemu

o pe r ac y j ne go b e z powi a d om i e ni a.

Motherboard Manual

RUSSIAN

Ver 3.x Ver 1.x

CPU

(центральн

ый

проц есс ор)

Гнездо AM2

Процессоры AM D At hlon 64 / At hlon 64 FX /

Sempron

Архитектура AMD 64 разрешать обработка

данны х на 32 и 64 бит

Поддержка Hyper Transport и Cool’n’Q uiet

Гнездо AM2

Процессоры AM D At hlon 64 / At hlon 64 FX /

Sempron

Архитектура AMD 64 разрешать обработка

данны х на 32 и 64 бит

Поддержка Hyper Transport и Cool’n’Q uiet

FSB Поддержка HyperTransport с пропускной

способностью до 1000 МГц

Поддержка HyperTransport с пропускной

способностью до 1000 МГц

Набор

микросхем

GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

Графика

Встроенная в набор микросхем GeForc e 6100

Максимальная совместно ис пользуемая видео

память составляет 256 МБ

Встроенная в набор микросхем GeForc e 6100

Максимальная совместно использ уемая видео

память составляет 256 МБ

Основная

память

Слоты DDR2 DIMM x 4

Каждый модуль DIMM поддерживает

256/512МБ & 1ГБ DDR2

Максимальная ём к ос т ь памяти 4 ГБ

Модуль памяти с двухканальным реж имом

DDR2

Поддержка DDR2 400 / 533 / 667 / 800

Не поддерживает зарегистрированны е

модули DIMM and ECC DIMM

Слоты DDR2 DIMM x 4

Каждый модуль DIMM поддерживает

256/512МБ & 1ГБ DDR2

Максимальная ём к ос т ь памяти 4 ГБ

Модуль памяти с двухканальным реж имом

DDR2

Поддержка DDR2 400 / 533 / 667 / 800

Не поддерживает зарегистрированны е

модули DIMM and ECC DIMM

Super I/O

ITE 8712F / 8716F

Обеспечивает наиболее ис п о ль з у е мы е

действующие функциональные возможности

Super I/O.

Интерфейс с низ ким количеством вы в о д о в

Иниц иативы по охране окружающей среды,

А ппаратны й монитор

Регулятор скорости

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

ITE 8712F / 8716F

Обеспечивает наиболее ис п о ль з у е мы е

действующие функциональные возможности

Super I/O.

Интерфейс с низ ким количеством вы в о д о в

Иниц иативы по охране окружающей среды,

А ппаратны й монитор

Регулятор скорости

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

IDE

Встроенное ус т р о йс тв о управления

встроенными интерфейс ами устройств

Режим "хозяина" шины Ultra DMA 33 / 66 / 100

/ 133

Поддержка режима PIO 0~4,

Встроенное ус тр о йс тв о управления

встроенными интерфейс ами устройств

Режим "хозяина" шины Ultra DMA 33 / 66 / 100

/ 133

Поддержка режима PIO 0~4,

SA TA II

Встроенное последовательное устройство

управления ATA

скорость передачи данны х до 3 гигабит/с.

Соответствие с пец ификац ии SA TA версия 2. 0.

Встроенное последовательное устройство

управления ATA

скорость передачи данны х до 3 гигабит/с.

Соответствие с пец ификац ии SA TA версия 2. 0.

Локальная

сеть

Realtek 8100C

Автоматическое согласование 10 / 100 Мб/с

Realtek 8201CL PHY

Автоматическое согласование 10 / 100 Мб/с

GeForce 6100 AM2

Ver 3.x Ver 1.x

Звуковой

кодек

ALC850

Восьмиканальный звуковой вы х о д

AC’97 Версия 2. 3

ALC 655 / 658 (дополнительно)

Шестиканальный звуковой вы х о д

AC’97 Версия 2. 3

Слот PCI x2 Слот PCI x2

Слот PCI Express x16 x1 Слот PCI Express x16 x1

Слоты

Слот PCI Express x 1 x1 Слот PCI Express x 1 x1

Разъём НГМД x1 Разъём НГМД x1

Разъём Порт подключения принтера x1 Разъём Порт подключения принтера x1

Разъём IDE x2 Разъём IDE x2

Разъём SATA x2 Разъём SATA x2

Разъём на лиц евой панели x1 Разъём на лиц евой панели x1

Входной звуковой разъём x1 Входной звуковой разъём x1

Разъём ввода для CD x1 Разъём ввода для CD x1

Разъём вы в о д а для S/PDIF x1 Разъём вы в о д а для S/PDIF x1

Контактирующее приспособление

вентилятора центрального проц ес с ора x1

Контактирующее приспособление

вентилятора центрального проц ес с ора x1

Контактирующее приспособление

вентилятора системы x3

Контактирующее приспособление

вентилятора системы x1

Шасси открытого контактирующего

приспос обления (дополнительно) x 1

Шасси открытого контактирующего

приспос обления (дополнительно) x 1

Открытое ко н та к ти рую щ е е приспособление

CMOS x1

Открытое ко н та к ти рую щ е е приспособление

CMOS x1

USB-разъём x2 USB-разъём x2

Разъем питания (24 вы в о д ) x1 Разъем питания (24 вы в о д ) x 1

Встроенны

й раз ъём

Разъем питания (4 вы в о д) x1 Разъем питания (4 вы в о д) x1

Задняя

панель

средств

ввода-вы в

ода

Клавиатура PS/2 x1

Мышь PS / 2 x 1

Последовательный порт x1

Порт VGA x1

Порт LAN x1

USB-порт x4

Гнездо для подключения наушников x6

Клавиатура PS/2 x1

Мышь PS / 2 x 1

Последовательный порт x1

Порт VGA x1

Порт LAN x1

USB-порт x4

Гнездо для подключения наушников x3

Размер

панели 244 мм (Ш) X 244 мм (В) 210 мм (Ш) X 244 мм (В)

Специальн

ые

технически

характерис

тики

NVIDIA nTunes

Поддержка RAID 0 / 1

NVIDIA nTunes

Поддержка RAID 0 / 1

Поддержка

Windows 2K / XP

Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с

или без предварительного уведомления.

Windows 2K / XP

Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с

или без предварительного уведомления.

Motherboard Manual

ARABIC

Ver 3.x Ver 1.x

ﺔ ﺠﻟﺎ ﻌﻤ ﻟا ةﺪﺣو

ﺔﻳﺰآﺮﻤﻟا

ﺲﺒﻘﻡAM2

تﺎ ﺠﻟﺎ ﻌﻡ AMD Athlon 64 / Athlon 64 FX / Sempron

ﺔ ﻴﻨﻘ ﺗ ﻦ ﻜﻤﺗ AM D 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎ ﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝ إ 32 و64 ﺖﺏ

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ Hyper Transport و Cool’n’Quiet

ﺲﺒﻘﻡAM2

تﺎ ﺠﻟﺎ ﻌﻡ AMD Athlon 64 / Athlon 64 FX / Sempron

ﺔ ﻴﻨﻘ ﺗ ﻦ ﻜﻤﺗ AM D 64 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎ ﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝ إ 32 و64 ﺖﺏ

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ Hyper Transport و Cool’n’Quiet

ﻲﺒ ﻥﺎﺠ ﻟا ﻲﻡ ﺎﻡ ﻷا ﻞﻗﺎﻨﻟا ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ HyperTransport ﻰﻟإ ﻞﺼﻳ ددﺮﺘﺏ 1000دد ﺮ ﺗ

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ HyperTransport ﻰﻟإ ﻞﺼﻳ ددﺮﺘﺏ 1000دد ﺮ ﺗ

ﺢﺋ اﺮﺸ ﻟا ﺔﻋﻮﻤﺠﻡ

GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

تﺎﻡﻮ ﺳﺮﻟ ا ﺔﻗﺎ ﻄﺏ

ﻖﺋ ﺎﻗر ﻲﻓ ﺔﺠﻡﺪﻡ GeForce 6100

ﺔآ ﺮﺘ ﺸﻤ ﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼ ﻗ أ256ﺖﻳﺎ ﺏ ﺎﺠﻴﻡ

ﻖﺋ ﺎﻗر ﻲﻓ ﺔﺠﻡﺪﻡ GeForce 6100

ﺔآ ﺮﺘ ﺸﻤ ﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼ ﻗ أ256ﺖﻳﺎ ﺏ ﺎﺠﻴﻡ

ﺔﻴﺴ ﻴﺋﺮﻟا ةﺮآ اﺬﻟا

ﺔﺤﺘ ﻓDDR2 DIMM دﺪﻋ4

ﺔﺤﺘﻓ ﻞآ ﻢﻋ ﺪ ﺗ DIMM عﻮ ﻥ ﻦﻡ ةﺮآ اذ ﻢﻋ ﺪﺗ DDR2 ﺔﻌﺳ 256/512 ﺎﺠﻴﻡ

و ﺖﻳﺎﺏ1 ﺎﺠ ﻴﺝﺖﻳﺎﺏ

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ4 ﺖﻳ ﺎﺏ ﺎﺠﻴ ﺝ

ةﺮآ اذ ةﺪﺣوDDR2 ﻘﻟا ﺔﺝودﺰﻡةﺎﻨ

عﻮ ﻥ ﻦﻡ ةﺮآ اﺬﻟا ﻢﻋ ﺪ ﺗ DDR2 تﺎﻌﺳ 4 400 / 533 / 667 / 800

ﺖﻳ ﺎﺏ ﺎﺠﻴﻡ

ةﺮآ اﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻡ ﻖﻓ اﻮ ﺘ ﺗ ﻻ ﻲﺘﻟا ﻚﻠ ﺗ و ECC

ﺔﺤﺘ ﻓDDR2 DIMM دﺪﻋ4

ﺔﺤﺘﻓ ﻞآ ﻢﻋ ﺪ ﺗ DIMM عﻮ ﻥ ﻦﻡ ةﺮآ اذ ﻢﻋ ﺪﺗ DDR2 ﺔﻌﺳ 256/512 ﺎﺠﻴﻡ

و ﺖﻳﺎﺏ1 ﺎﺠ ﻴﺝﺖﻳﺎﺏ

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ4 ﺖﻳ ﺎﺏ ﺎﺠﻴ ﺝ

ةﺮآ اذ ةﺪﺣوDDR2 ﻘﻟا ﺔﺝودﺰﻡةﺎﻨ

عﻮ ﻥ ﻦﻡ ةﺮآ اﺬﻟا ﻢﻋ ﺪ ﺗ DDR2 تﺎﻌﺳ 4 400 / 533 / 667 / 800

ﺖﻳ ﺎﺏ ﺎﺠﻴﻡ

ةﺮآ اﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻡ ﻖﻓ اﻮ ﺘ ﺗ ﻻ ﻲﺘﻟا ﻚﻠ ﺗ و ECC

Super I/O

ITE 8712F / 8716F

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎ ﻡا ﺪ ﺨ ﺘﺳا ﺮﺜ آ ﻷ ا .

ﺗﻢﻋ ﺪ ﺔ ﻴﻨﻘﺗ Low Pin Count Interface

ﺔ ﺌﻴﺒ ﻟا ﻲﻓ ﻢﻜ ﺤﺘ ﻟا ﻞﺋ ﺎﺳو:

ةﺰﻬ ﺝﻷ ا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤ ﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻡ ITE

ITE 8712F / 8716F

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎ ﻡا ﺪ ﺨ ﺘﺳا ﺮﺜ آ ﻷ ا .

ﺗﻢﻋ ﺪ ﺔ ﻴﻨﻘﺗ Low Pin Count Interface

ﺔ ﺌﻴﺒ ﻟا ﻲﻓ ﻢﻜ ﺤﺘ ﻟا ﻞﺋ ﺎﺳو:

ﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡةﺰﻬ ﺝﻷ ا ﺔﻟﺎ

ﺔﺣوﺮﻤ ﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻡ ITE

ﺬﻔ ﻨﻡIDE

ﻢﻜﺤﺘﻡIDEﻞﻡﺎﻜﺘﻡ

ﺔ ﻴﻨﻘﺘ ﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133

ﻲﺴ ﻴﺋر ﻊﺿ و

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻢﻜﺤﺘﻡIDEﻞﻡﺎﻜﺘﻡ

ﺔ ﻴﻨﻘﺘ ﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133

ﻲﺴ ﻴﺋر ﻊﺿ و

ﻊﺿو ﻢﻋدPIO Mode 0~4

SATA II

ﻢﻜﺤﺘﻡSerial ATAﻞﻡﺎﻜﺘﻡ

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ ت ﺎﻥ ﺎﻴﺒﻟا ﻞﻘﻥ3 ﺖﺏﺎﺠﻴﺝ/ﺔ ﻴﻥﺎﺙ.

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSA TA راﺪﺹﻹا 2.0.

ﻢﻜﺤﺘﻡSerial ATAﻞﻡﺎﻜﺘﻡ

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ ت ﺎﻥ ﺎﻴﺒﻟا ﻞﻘﻥ3 ﺖﺏﺎﺠﻴﺝ/ﺔ ﻴﻥﺎﺙ.

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSA TA راﺪﺹﻹا 2.0.

ﺔﻴﻠﺥ اد ﺔﻜﺒﺵ

Realtek 8100C

ﻲﺋﺎﻘﻠﺗ ضوﺎ ﻔﺗ10/100 ﺖﻳ ﺎﺏ ﺎﺠﻴ ﻡ /و ﺔ ﻴﻥﺎ ﺙ1ﺖﺏ ﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ

Realtek 8201CL PHY

ﻲﺋﺎﻘﻠﺗ ضوﺎ ﻔﺗ10/100 ﺖﻳ ﺎﺏ ﺎﺠﻴ ﻡ /و ﺔ ﻴﻥﺎ ﺙ1ﺖﺏ ﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ

GeForce 6100 AM2

Ver 3.x Ver 1.x

تﻮﺼ ﻟا ﻚﻳ دﻮ آ

ALC850

8تﻮ ﺼﻟا جﺮﺨ ﻟ تاﻮﻨﻗ

را ﺪ ﺹ ﻹ ا 2. 3 ﻦﻡ AC’97

)يرﺎ ﻴﺘﺥا( ALC655 / 658

6تﻮ ﺼﻟا جﺮﺨ ﻟ تاﻮﻨﻗ

را ﺪ ﺹ ﻹ ا 2. 3 ﻦﻡ AC’97

ﺔﺤﺘ ﻓPCI دﺪﻋ2 ﺔﺤﺘ ﻓPCI دﺪﻋ2

ﺔﺤﺘ ﻓx16 PCI Express دﺪﻋ1 ﺔﺤﺘ ﻓx16 PCI Express دﺪﻋ1 تﺎ ﺤﺘﻔ ﻟا

ﺔﺤﺘ ﻓPCI Express x 1 دﺪﻋ1 ﺔﺤﺘ ﻓPCI Express x 1 دﺪﻋ1

ﺔﻥﺮ ﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻥﺮ ﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1

ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡIDE ﺪﻋ د2 ﺬﻔﻨﻡIDE دﺪﻋ2

ﺬﻔﻨﻡSATA دﺪﻋ2 ﺬﻔﻨﻡSATA دﺪﻋ2

ﺔﻴ ﻡﺎ ﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻴ ﻡﺎ ﻡﻷ ا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1

ﻲﻡﺎ ﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﻲﻡﺎ ﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡCD- IN دﺪﻋ1 ﺬﻔﻨﻡCD-IN دﺪﻋ1

جﺮﺥ ﺬﻔﻨﻡS/PDIF دﺪﻋ1 جﺮﺥ ﺬﻔﻨﻡS/PDI F دﺪﻋ1

ﺔﺣوﺮﻡ ﺔﻠﺹوﺔﻳﺰآﺮ ﻤﻟ ا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو دﺪﻋ1 ﺔﻳﺰآﺮ ﻤﻟ ا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮ ﻡ ﺔﻠﺹو دﺪﻋ1

مﺎﻈﻨﻟا ﺔﺣوﺮ ﻡ ﺔﻠﺹو دﺪﻋ3 مﺎﻈﻨﻟا ﺔﺣوﺮ ﻡ ﺔﻠﺹو دﺪﻋ1

ﻞﻜ ﻴ ﻬﻟ ا ﺢﺘﻓ ﺔﻠﺹو)ير ﺎﻴ ﺘﺥ ا( دﺪﻋ1 ﻞﻜ ﻴ ﻬﻟ ا ﺢﺘﻓ ﺔﻠﺹو)ير ﺎﻴ ﺘﺥ ا( دﺪﻋ1

ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1 ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1

ﺬﻔﻨﻡUSB دﺪﻋ2 ﺬﻔﻨﻡUSB دﺪﻋ2

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1

ﺢﻄﺳ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا

ﺔﺣﻮﻠﻟا

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)4ﺲ ﻴﺏﺎ ﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ)4ﺲ ﻴﺏﺎ ﺏد( دﺪﻋ1

ﻞﺥد ﺬﻓﺎﻨﻡ/ جﺮﺥ

ﺔﻴﻔﻠﺨ ﻟا ﺔﺣﻮﻠﻟا

ﺢﻴﺗﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻡ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡV GA دﺪﻋ1

ﺔﻜﺒﺵ ﺬﻔﻨﻡﺔﻴﻠ ﺤﻡ لﺎ ﺼ ﺗا دﺪﻋ1

ﺬﻓﺎﻨﻡUSB دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ6

ﺢﻴﺗﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻡ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡV GA دﺪﻋ1

ﺔﻴﻠ ﺤﻡ لﺎ ﺼ ﺗا ﺔﻜﺒ ﺵ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻓﺎﻨﻡUSB دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ3

ﺔﺹﺎﺥ ﺎﻳاﺰﻡ

NVIDIA nTunes

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ RAID 0 / 1

NVIDIA nTunes

ﺔ ﻴﻨﻘﺗ ﻢﻋ ﺪ ﺗ RAID 0 / 1

ﺔﺣﻮﻠﻟا ﻢﺠ ﺣ 244 ﻢﻡ)ضﺮﻋ (X 244 ﻢﻡ)عﺎ ﻔ ﺗر ا( 210 ﻢﻡ)ضﺮﻋ (X 244 ﻢﻡ)عﺎ ﻔ ﺗر ا(

ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻥأ ﻢﻋد

Windows 2K / XP

ﻆﻔ ﺘﺤﺗ Biostar وأ رﺎ ﻄﺥ ﺈﺏ ﻞﻴﻐﺸﺗ مﺎ ﻈﻥ يﻷ ﻢﻋ ﺪﻟ ا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

رﺎ ﻄﺥ إ نوﺪﺏ.

Windows 2K / XP

ﻆﻔ ﺘﺤﺗ Biostar ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ وأ رﺎ ﻄﺥ ﺈ ﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋ ﺪﻟ ا

رﺎ ﻄﺥ إ نوﺪﺏ.

Motherboard Manual

JAPANESE

Ver 3.x Ver 1.x

CPU

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Sempron プロセ

ッサ

AMD 64アーキテクチャでは、32ビットと64ビット計

算が可能です

ハイパートランスポートとクールアンドクワイアット

をサポートします

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Sempron プロセ

ッサ

AMD 64アーキテクチャでは、32ビットと64ビット計

算が可能です

ハイパートランスポートとクールアンドクワイアット

をサポートします

FSB 1000 MHz のバンド幅までハイパートランスポートを

サポートします

1000 MHz のバンド幅までハイパートランスポートを

サポートします

チップセット

GeForce 6100

nForce 4 10

GeForce 6100

nForce 4 10

グラフィック

ス

GeForce 6100 チップセットに統合

最大の共有ビデオメモリは256MBです

GeForce 6100 チップセットに統合

最大の共有ビデオメモリは256MBです

メインメモリ

DDR2 DIMMスロット x 4

各DIMMは 256/512MB & 1GB DDR2をサポート

最大メモリ容量4GB

デュアルチャンネルモードDDR2メモリモジュール

DDR2 400 / 533 / 667 / 800をサポート

登録済みDI MM とECC DIMMはサポートされません

DDR2 DIMMスロット x 4

各DIMMは 256/512MB & 1GB DDR2をサポート

最大メモリ容量4GB

デュアルチャンネルモードDDR2メモリモジュール

DDR2 400 / 533 / 667 / 800をサポート

登録済みDI MM とECC DIMMはサポートされません

Super I/O

ITE 8712F / 8716F

もっとも一般に使用されるレガシーSuper I/O機能を

採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITEの「スマートガーディアン」機能

ITE 8712F / 8716F

もっとも一般に使用されるレガシーSuper I/O機能を

採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITEの「スマートガーディアン」機能

IDE

統合IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

統合IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

SA TA II

統合シリアルATAコントローラ

最高3 Gb/秒のデータ転送速度

SA TAバージョン2. 0 仕様に準拠。

統合シリアルATAコントローラ

最高3 Gb/秒のデータ転送速度

SA TAバージョン2. 0 仕様に準拠。

LAN

Realtek 8100C

10 / 100 Mb/秒および1Gb/秒のオートネゴシエーシ

ョン

Realtek 8201CL PHY

10 / 100 Mb/秒および1Gb/秒のオートネゴシエーシ

ョン

GeForce 6100 AM2

Ver 3.x Ver 1.x

サウンド

Codec

ALC850

8チャンネルオーディオアウト

AC’97バージョン2.3

ALC 655 / 658 (オプション)

6チャンネルオーディオアウト

AC’97バージョン2.3

PCIスロット x2 PCIスロット x2

PCI Express x16スロット x1 PCI Express x16スロット x1 スロット

PCI Express x 1スロット x1 PCI Express x 1スロット x1

フロッピーコネクタ x1 フロッピーコネクタ x1

プリンタポートコネクタ x1 プリンタポートコネクタ x1

IDEコネクタ x2 IDEコネクタ x2

SA TAコネクタ x2 SATAコネクタ x2

フロントパネルコネクタ x1 フロントパネルコネクタ x1

フロントオーディオコネクタ x1 フロントオーディオコネクタ x1

CDインコネクタ x1 CDインコネクタ x1

S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1

CPUファンヘッダ x1 CPUファンヘッダ x1

システムファンヘッダ x3 システムファンヘッダ x1

シャーシオープンヘッダ(オプション) x1 シャーシオープンヘッダ(オプション) x 1

CMOSクリアヘッダ x1 CMOSクリアヘッダ x1

USBコネクタ x2 USBコネクタ x2

電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1

オンボードコ

ネクタ

電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1

背面パネル

I/O

PS/2キーボード x1

PS/2マウス x1

シリアルポート x1

VGAポート x1

LANポート x1

USBポート x4

オーディオジャック x6

PS/2キーボード x1

PS/2マウス x1

シリアルポート x1

VGAポート x1

LANポート x1

USBポート x4

オーディオジャック x3

ボードサイズ

244 mm (幅) X 244 mm (高さ) 210 mm (幅) X 244 mm (高さ)

特殊機能 NVIDIA nTunes

RAID 0 / 1 のサポート

NVIDIA nTunes

RAID 0 / 1 のサポート

OSサポート

Windows 2K / XP

Biostarは事前のサポートなしにOSサポートを追加ま

たは削除する権利を留保します。

Windows 2K / XP

Biostarは事前のサポートなしにOSサポートを追加ま

たは削除する権利を留保します。

2006/10/19

GeForce 6100 AM2 BIOS Setup

1 BIOS Setup (Ver 3.x) ............................................................................. 1

1.1 Main Menu .......................................................................................... 3

1.2 Standard CMOS Features.................................................................. 7

1.3 Advanced BIOS Features ................................................................... 9

1.4 Advanced Chipset Features.............................................................. 16

1.5 Integrated Peripherals...................................................................... 19

1.6 Power Management Setup ............................................................... 25

1.7 PnP/PCI Configurations................................................................... 28

1.8 PC Health Status ............................................................................... 31

1.9 Over Clock Navigator Engine.......................................................... 33

1.10 CMOS Reload Program(C.R.P.).................................................... 39

2 BIOS Setup (Ver 1.x) ........................................................................... 40

2.1 Main Menu ........................................................................................ 42

2.2 Standard CMOS Features................................................................ 46

2.3 Advanced BIOS Features ................................................................. 48

2.4 Advanced Chipset Features.............................................................. 53

2.5 Integrated Peripherals...................................................................... 56

2.6 Power Management Setup ............................................................... 63

2.7 PnP/PCI Configurations................................................................... 66

2.8 PC Health Status ............................................................................... 69

2.9 Frequency/ Voltage Control ............................................................. 72

GeForce 6100 AM2 BIOS Setup

1 BIOS Setup (Ver 3.x)

Introduction

The purpose of this manual is to describe the settings in the Award™ BIOS Setup

program on this motherboard. The Setup program allows users to modify the basic

system configuration and save these settings to CMOS RAM. The power of

CMOS RAM is supplied by a battery so that it retains the Setup information when

the power is turned off.

Basic Input-Output System (BIOS) determines what a computer can do without

accessing programs from a disk. This system controls most of the input and output

devices such as keyboard, mouse, serial ports and disk drives. BIOS activates at

the first stage of the booting process, loading and executing the operating system.

Some additional features, such as virus and password protection or chipset

fine-tuning options are also included in BIOS.

The rest of this manual will to guide you through the options and settings in BIOS

Setup.

Plug and Play Support

This AWARD BIOS supports the Plug and Play Version 1.0A specification and

ESCD (Extended System Configuration Data) write.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.

APM Support

This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power

Management (APM) specification. Power management features are implemented

via the System Management Interrupt (SMI). Sleep and Suspend power

management modes are supported. Power to the hard disk drives and video

monitors can also be managed by this AWARD BIOS.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power

interface specification (ACPI). It provides ASL code for power management and

device configuration capabilities as defined in the ACPI specification, developed

by Microsoft, Intel and Toshiba.

GeForce 6100 AM2 BIOS Setup

PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral

Component Interconnect) local bus specification.

DRAM Support

DDR SDRAM (Double Data Rate Synchronous DRAM) is supported.

Supported CPUs

This AWARD BIOS supports the AMD CPU.

Using Setup

Use the arrow keys to highlight items in most of the place, press <Enter> to select,

use the <PgUp> and <PgDn> keys to change entries, press <F1> for help and press

<Esc> to quit. The following table provides more detail about how to navigate in

the Setup program by using the keyboard.

Keystroke Function

Up arrow Move to previous item

Down arrow Move to next item

Left arrow Move to the item on the left (menu bar)

Right arrow Move to the item on the right (menu bar)

Move Enter Move to the item you desired

PgUp key Increase the numeric value or make changes

PgDn key Decrease the numeric value or make changes

+ Key Increase the numeric value or make changes

- Key Decrease the numeric value or make changes

Esc key Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu – Exit

Current page and return to Main Menu

F1 key General help on Setup navigation keys

F5 key Load previous values from CMOS

F7 key Load the optimized defaults

F10 key Save all the CMOS changes and exit

GeForce 6100 AM2 BIOS Setup

1.1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear

on the screen. The Main Menu allows you to select from several setup functions.

Use the arrow keys to select among the items and press <Enter> to accept and

enter the sub-menu.

 Figure 1: Main Menu

!! WARNING !!

For better system performance, the BIOS firmware is being

continuously updated. The BIOS information described in this

manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference

only. The actual BIOS information and settings on board may

be slightly different from this manual.

GeForce 6100 AM2 BIOS Setup

Standard CMOS Features

This submenu contains industry standard configurable options.

Advanced BIOS Features

This submenu allows you to configure advanced features of the BIOS.

Advanced Chipset Features

This submenu allows you to configure special chipset features.

Integrated Peripherals

This submenu allows you to configure certain IDE hard drive options and

Programmed Input/ Output features.

Power Management Setup

This submenu allows you to configure the power management features.

PnP/PCI Configurations

This submenu allows you to configure certain “Plug and Play” and PCI options.

PC Health Status

This submenu allows you to monitor the hardware of your system.

Frequency/ Voltage Control

This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.

(However, we suggest you to use the default setting. Changing the voltage and

clock improperly may damage the CPU or M/B!)

GeForce 6100 AM2 BIOS Setup

Load Optimized Defaults

This selection allows you to reload the BIOS when problem occurs during system

booting sequence. These configurations are factory settings optimized for this

system. A confirmation message will be displayed before defaults are set.

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor from

making changes using the CMOS Setup Utility. You will be prompted with to

enter a password.

Set User Password

If the Supervisor Password is not set, then the User Password will function in the

same way as the Supervisor Password. If the Supervisor Password is set and the

User Password is set, the “User” will only be able to view configurations but will

not be able to change them.

Save & Exit Setup

Save all configuration changes to CMOS (memory) and exit setup. Confirmation

message will be displayed before proceeding.

GeForce 6100 AM2 BIOS Setup

Exit Without Saving

Abandon all changes made during the current session and exit setup. Confirmation

message will be displayed before proceeding.

Upgrade BIOS

This submenu allows you to upgrade bios.

GeForce 6100 AM2 BIOS Setup

1.2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories.

Each category includes no, one or more than one setup items. Use the arrow keys

to highlight the item and then use the<PgUp> or <PgDn> keys to select the value

you want in each item.

 Figure 2: Standard CMOS Setup

Main Menu Selections

This table shows the items and the available options on the Main Menu.

Item Options Description

Date mm : dd : yy

Set the system date. Note

that the ‘Day’ automatically

changes when you set the

date.

Time hh : mm : ss Set the system internal

clock.

IDE Primary Master Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options

IDE Primary Slave Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

IDE Secondary Master Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

GeForce 6100 AM2 BIOS Setup

Item Options Description

IDE Secondary Slave Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

Drive A

Drive B

360K, 5.25 in

1.2M, 5.25 in

720K, 3.5 in

1.44M, 3.5 in

2.88M, 3.5 in

None

Select the type of floppy

disk drive installed in your

system.

Video

EGA/VGA

CGA 40

CGA 80

MONO

Select the default video

device.

Halt On

All Errors

No Errors

All, but Keyboard

All, but Diskette

All, but Disk/ Key

Select the situation in which

you want the BIOS to stop

the POST process and

notify you.

Base Memory N/A

Displays the amount of

conventional memory

detected during boot up.

Extended Memory N/A

Displays the amount of

extended memory detected

during boot up.

Total Memory N/A Displays the total memory

available in the system.

GeForce 6100 AM2 BIOS Setup

1.3 Advanced BIOS Features

 Figure 3: Advanced BIOS Setup

Boot Seq & Floppy Setup

This item allows you to setup boot sequence & Floppy.

GeForce 6100 AM2 BIOS Setup

Removable Device Priority

Select Removable Boot Device Priority.

The Choices: Floppy Disks, Zip100, USB-FDD0, USB-FDD1, USB-ZIP0,

USB-ZIP1, LS120.

Hard Disk Boot Priority

The BIOS will attempt to arrange the Hard Disk boot sequence automatically.

You can change the Hard Disk booting sequence here.

The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB

HDD1, USB HDD2, and Bootable Add-in Cards.

GeForce 6100 AM2 BIOS Setup

First/Second/Third Boot Device

The BIOS will attempt to load the operating system in this order.

The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,

ZIP100, LAN, HPT370, Disabled.

Boot Other Device

When enabled, BIOS will try to load the operating system from other device when

it failed to load from the three devices above.

The Choices: Enabled (default), Disabled

Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical drive

assignments.

The Choices: Disabled (default), Enabled.

Boot Up Floppy Seek

When enabled, System will test the floppy drives to determine if they have 40 or

80 tracks during boot up. Disabling this option reduces the time it takes to

boot-up.

The Choices: Enabled (default), Disabled.

Cache Setup

GeForce 6100 AM2 BIOS Setup

CPU Internal Cache

Depending on the CPU/chipset in use, you may be able to increase memory

access time with this option.

Enabled (default) Enable cache.

Disabled Disable cache.

External Cache

This option enables or disables “Level 2” secondary cache on the CPU, which

may improve performance.

Enabled (default) Enable cache.

Disabled Disable cache.

CPU Feature

NPT Fid Control

The Choices: Auto (default), x4 800, x5 1000, x6 1200, x7 1400, x8 1600, x9

1800, x10 2000.

AMD K8 Cool&Quiet control

The Choices: Auto (default).

GeForce 6100 AM2 BIOS Setup

Virus Warning

This option allows you to choose the VIRUS Warning feature that is used to

protect the IDE Hard Disk boot sector. If this function is enabled and an attempt is

made to write to the boot sector, BIOS will display a warning message on the

screen and sound an alarm beep.

Disabled (default) Virus protection is disabled.

Enabled Virus protection is activated.

Quick Power On Self Test

Enabling this option will cause an abridged version of the Power On Self-Test

(POST) to execute after you power up the computer.

Disabled Normal POST.

Enabled (default) Enable quick POST.

Boot Up NumLock Status

Selects the NumLock State after the system switched on.

The Choices:

On (default) Numpad is number keys.

Off Numpad is arrow keys.

Gate A20 Option

Select if chipset or keyboard controller should control Gate A20.

Normal A pin in the keyboard controller controls GateA20.

Fast (default) Lets chipset control Gate A20.

Typematic Rate Setting

When a key is held down, the keystroke will repeat at a rate determined by the

keyboard controller. When enabled, the typematic rate and typematic delay can be

configured.

The Choices: Disabled (default), Enabled.

Typematic Rate (Chars/Sec)

Sets the rate at which a keystroke is repeated when you hold the key down.

The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30.

GeForce 6100 AM2 BIOS Setup

Typematic Delay (Msec)

Sets the delay time after the key is held down before it begins to repeat the

keystroke.

The Choices: 250 (default), 500, 750, 1000.

Security Option

This option will enable only individuals with passwords to bring the system online

and/or to use the CMOS Setup Utility.

System: A password is required for the system to boot and is also

required to access the Setup Utility.

Setup (default): A password is required to access the Setup Utility only.

This will only apply if passwords are set from the Setup main menu.

APIC MODE

Selecting Enabled enables APIC device mode reporting from the BIOS to the

operating system.

The Choices: Enabled (default), Disabled.

MPS Version Control For OS

The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.

Select version supported by the operation system running on this computer.

The Choices: 1.4 (default), 1.1.

OS Select For DRAM > 64MB

A choice other than Non-OS2 is only used for OS2 systems with memory

exceeding 64MB.

The Choices: Non-OS2 (default), OS2.

Small Logo(EPA) Show

This item allows you to select whether the “Small Logo” shows. Enabled (default)

“Small Logo” shows when system boots up. Disabled No “Small Logo” shows

when system boots

The Choices: Enabled (default), Disabled

GeForce 6100 AM2 BIOS Setup

Summary Screen Show

This item allows you to enable/disable the summary screen. Summary screen

means system configuration and PCI device listing.

The Choices: Disabled (default), Enabled.

GeForce 6100 AM2 BIOS Setup

1.4 Advanced Chipset Features

This submenu allows you to configure the specific features of the chipset installed

on your system. This chipset manage bus speeds and access to system memory

resources, such as DRAM. It also coordinates communications with the PCI bus.

The default settings that came with your system have been optimized and therefore

should not be changed unless you are suspicious that the settings have been

changed incorrectly.

 Figure 4. Advanced Chipset Setup

Frame Buffer Size

The Choices: 32M (default), 16M, 64M, 128M, Disabled.

PMU

The Choices: Auto (default), Disabled.

NB-->SB HT Speed

The Choices: 4X (default).1X, 2X, 3X, 5X.

NB<--SB HT Speed

The Choices: 4X (default).1X, 2X, 3X, 5X.

GeForce 6100 AM2 BIOS Setup

K8<->NB HT Width

The Choices:↓16 ↑16 (default), ↓8 ↑8.

NB<->SB HT Width

The Choices: ↓8 ↑8 (default), ↓16 ↑16.

Err94 Enh

This item allows you to enable/disable the “sequential Prufetch Feature” of K8

CPU.

The Choices: Auto (default), Disabled.

Onboard GPU

The Choices: Auto (default), Always Enable.

CPU Spread Spectrum

The Choices: Disabled (default), Center, Down.

PCIE Spread Spectrum

This item allows you to disable \ enable the SATA spread spectrum function.

The Choices: Disabled (default), Enabled.

SATA Spread Spectrum

This item allows you to disable \ enable the SATA spread spectrum function.

The Choices: Disabled (default), Enabled.

HT Spread Spectrum

The Choices: Disabled (default), Center, Down.

SSE/SSE2 Instructions

The Choices: Enabled (default), Disabled.

GeForce 6100 AM2 BIOS Setup

System BIOS Cacheable

Selecting the “Disabled ” option allows caching of the system BIOS ROM at

F0000h-FFFFFh which can improve system performance. However, any programs

writing to this area of memory will cause conflicts and result in system errors.

The Choices: Disabled (default), Enabled.

GeForce 6100 AM2 BIOS Setup

1.5 Integrated Peripherals

 Figure 5. Integrated Peripherals

IDE Function Setup

Highlight the “Press Enter” label next to the “VIA OnChip IDE Device” label and

press enter key will take you a submenu with the following options:

GeForce 6100 AM2 BIOS Setup

On-chip IDE Channel 0/1

The motherboard chipset contains a PCI IDE interface with support for two IDE

channels. Select “Enabled” to activate the first and/or second IDE interface.

Select “Disabled” to deactivate an interface if you are going to install a primary

and/or secondary add-in IDE interface.

The Choices: Enabled (default), Disabled.

IDE Primary/Secondary/Master/Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for

each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4

will increase performance progressively. In Auto mode, the system automatically

determines the best mode for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

IDE Primary/Secondary/Master/Slave UDMA

Ultra DMA function can be implemented if it is supported by the IDE hard drives

in your system. As well, your operating environment requires a DMA driver

(Windows 95 or OSR2may need a third party IDE bus master driver). If your hard

drive and your system software both support Ultra DMA, select Auto to enable

BIOS support.

The Choices: Auto (default), Disabled.

IDE DMA Transfer Access

This item allows you to enable or disable the IDE DMA transfer access.

The Choices: Enabled (default), Disabled.

Serial-ATA Controller

The Choices: All Enabled (default).

GeForce 6100 AM2 BIOS Setup

RAID Config

RAID Enable

This option allows you to enable or disable RAID function.

The Choices: Disabled (default), Enabled.

SATA 1/2 Primary/Secondary RAID

This option allows you to enable or disable SATA A Primary/Secondary RAID.

The Choices: Disabled (default), Enabled.

Super IO Device

Press Enter to configure the Super I/O Device.

GeForce 6100 AM2 BIOS Setup

Power On Function

This item allows you to choose the power on method.

The Choices: Button Only (default), Password, Hot Key, Mouse Left, Mouse

Right, Any Key, Keyboard 98.

KB Power on Password

Input password and press Enter to set the Keyboard power on password.

HOT Key power ON

Choose the Hot Key combination to boot up the system.

The Choices: Ctrl-F1 (default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6,

Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, Ctrl-F12.

Onboard FDC Controller

Select enabled if your system has a floppy disk controller (FDC) installed on the

system board and you wish to use it. If you installed another FDC or the system

uses no floppy drive, select disabled in this field.

The Choices: Enabled (default), Disabled.

Onboard Serial Port 1

Select an address and corresponding interrupt for the first and second serial ports.

The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,

Auto.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller with

which I/O Address.

The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

This item allows you to determine how the parallel port should function. The

default value is SPP.

The Choices:

SPP (default) Using Parallel port as Standard Printer Port.

EPP Using Parallel Port as Enhanced Parallel Port.

ECP Using Parallel port as Extended Capabilities Port.

ECP+EPP Using Parallel port as ECP & EPP mode.

ECP Mode Use DMA

Select a DMA Channel for the port.

The Choices: 3 (default), 1.

GeForce 6100 AM2 BIOS Setup

OnChip USB

This option should be enabled if your system has a USB installed on the system

board. You may need to disable this feature if you add a higher performance

controller.

The Choices: V1.1+V2.0 (default), Disabled, V1.1

USB Memory Type

The Choices: Base Memory<640k>(default).

USB Keyboard Support

This item allows you to enable or disable the USB Keyboard Legacy Support.

Enabled Enable USB Keyboard Support.

Disabled (default) Disable USB Keyboard Support.

USB Mouse Support

This item allows you to enable or disable the USB Mouse Legacy Support.

Enabled Enable USB Mouse Support.

Disabled (default) Disable USB Mouse Support.

AC97 Audio

This item allows you to enable or disable to support AC97 Audio.

The Choices: Auto (default), Disabled.

MAC LAN

This option allows you to control the onboard MAC LAN.

The Choices: Auto (default), Disabled.

Onboard LAN Boot ROM

This item allows you to enable or disable the Onboard LAN Boot ROM.

The Choices: Disabled (default), Enabled.

GeForce 6100 AM2 BIOS Setup

MAC Media Interface

This option allows you to control the onboard MAC Media Interface.

The Choices: Pin Strap (default), Disabled

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sectors

read / write. If your IDE hard drive supports block mode (most new drives do),

select Enabled for automatic detection of the optimal number of block mode (most

new drives do), select Enabled for automatic detection of the optimal number of

block read / write per sector where the drive can support.

The Choices: Enabled (default), Disabled.

POWER After PWR-Fail

This setting specifies how your system should behave after a power fail or

interrupts occurs. By choosing off will leave the computer in the power off state.

Choosing On will reboot the computer. Former-Sts will restore the system to the

status before power failure or interrupt occurs.

The Choices: Off (default), On, Former-Sts.

GeForce 6100 AM2 BIOS Setup

1.6 Power Management Setup

The Power Management Setup Menu allows you to configure your system to

utilize energy conservation and power up/power down features.

 Figure 6. Power Management Setup

ACPI Function

This item displays the status of the Advanced Configuration and Power

Management (ACPI).

The Choices: Enabled (default), Disabled.

ACPI Suspend Type

The item allows you to select the suspend type under the ACPI operating system.

The Choices: S1 (POS) (default) Power on Suspend

S3 (STR) Suspend to RAM

S1 & S3 POS+STR

GeForce 6100 AM2 BIOS Setup

Power Management

This category allows you to select the power saving method and is directly related

to the following modes:

1. HDD Power Down.

2. Suspend Mode.

There are three options of Power Management, three of which have fixed mode

settings

Min. Power Saving

Minimum power management.

Suspend Mode = 1 hr.

HDD Power Down = 15 min

Max. Power Saving

Maximum power management only available for sl CPU’s.

Suspend Mode = 1 min.

HDD Power Down = 1 min.

User Define (default)

Allow you to set each option individually.

When you choose user define, you can adjust each of the item from 1 min. to 1 hr.

except for HDD Power Down which ranges from 1 min. to 15 min.

Video Off Method

This option determines the manner when the monitor goes blank.

V/H SYNC+Blank

This selection will cause the system to turn off the vertical and horizontal

synchronization ports and write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video buffer.

DPMS(default)

Initial display power management signaling.

HDD Power Down

When enabled, the hard-disk drives will power down after a set time of system

inactivity. All other devices remain active.

The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7

Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.

GeForce 6100 AM2 BIOS Setup

Soft-Off by PWR-BTN

This item determines the behavior of system power button. Instant off turn off the

power immediately, and Delay 4 Sec. will require you to press and hold the power

button for 4 seconds to cut off the system power.

The Choices: Delay 4 Sec, Instant-Off (default).

WOL(PME#)/ From Soft-Off

This item allows you to enable or disable Wake On LAN from Soft-Off function.

The Choices: Disabled (default), Enabled.

WOR(RI#) From Soft-Off

This item allows you to enable or disable Wake On Ring from Soft-Off function.

The Choices: Disabled (default), Enabled.

USB Resume from S3/S4

This item allows you to wake up from S3 with USB device.

The Choices: Disabled (default), Enabled.

Power-On by Alarm

This function is for setting date and time for your computer to boot up. When

enabled, you can choose the date and time to boot up the system.

The Choices: Disabled (default), Enabled.

Date (of Month) Alarm

You can choose which month the system will boot up.

Time (hh:mm:ss) Alarm

You can choose the system boot up time, input hour, minute and second to specify.

Note: If you have change the setting, you must let the system boot up until it

goes to the operating system, before this function will work.

GeForce 6100 AM2 BIOS Setup

1.7 PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or Personal Computer

Interconnect, is a system which allows I/O devices to operate at speeds nearing the

speed of the CPU itself uses when communicating with its own special

components. This section covers some very technical items and it is strongly

recommended that only experienced users should make any changes to the default

settings.

 Figure 7: PnP/PCI Configurations

Init Display First

This item allows you to decide to active whether PCI Slot or on-chip VGA first.

The Choices: PCEx, PCI Slot (default).

GeForce 6100 AM2 BIOS Setup

Reset Configuration Data

The system BIOS supports the PnP feature which requires the system to record

which resources are assigned and protects resources from conflict.

Every peripheral device has a node, which is called ESCD. This node records

which resources are assigned to it. The system needs to record and update ESCD

to the memory locations. These locations are reserved in the system BIOS. If the

Disabled (default) option is chosen, the system‘s ESCD will update only when the

new configuration varies from the last one. If the Enabled option is chosen, the

system is forced to update ESCDs and then is automatically set to the “Disabled”

mode.

The above settings will be shown on the screen only if “Manual” is chosen for the

resources controlled by function.

Legacy is the term, which signifies that a resource is assigned to the ISA Bus and

provides non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource is

assigned to the PCI Bus or provides for ISA PnP add-on cards and peripherals.

The Choices: Disabled (default), Enabled.

Resources Controlled By

By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system

resources and automatically assign the relative IRQ and DMA channel for each

peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for

add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.

The Choices: Auto (ESCD) (default), Manual.

GeForce 6100 AM2 BIOS Setup

IRQ Resources

This submenu will allow you to assign each system interrupt a type, depending on

the type of device using the interrupt. When you press the “Press Enter” tag, you

will be directed to a submenu that will allow you to configure the system interrupts.

This is only configurable when “Resources Controlled By” is set to “Manual”.

IRQ-3 assigned to PCI Device

IRQ-4 assigned to PCI Device

IRQ-5 assigned to PCI Device

IRQ-7 assigned to PCI Device

IRQ-9 assigned to PCI Device

IRQ-10 assigned to PCI Device

IRQ-11 assigned to PCI Device

IRQ-12 assigned to PCI Device

IRQ-14 assigned to PCI Device

IRQ-15 assigned to PCI Device

PCI / VGA Palette Snoop

Some old graphic controllers need to “snoop” on the VGA palette and then map it

to their display as a way to provide boot information and VGA compatibility. This

item allows such snooping to take place.

The Choices: Disabled (default), Enabled

Maximum Payload Size

Set the maximum payload size for Transaction packets (TLP).

The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.

GeForce 6100 AM2 BIOS Setup

1.8 PC Health Status

 Figure 8: PC Health Status

Shutdown Temperature

This item allows you to set up the CPU shutdown Temperature. This item is only

effective under Windows 98 ACPI mode.

The Choices: Disabled (default) , 70℃/ 158℉, 75℃/ 167℉, 80℃/ 176℉.

CPU FAN Control by

The Choice “smart” can make your CPU FAN to reduce noise.

The Choices: SMART, Always On (default).

Show H/W Monitor in POST

If you computer contains a monitoring system, it will show PC health status during

POST stage. The item offers several different delay times.

The Choices: Enabled (default), Disabled.

CPU Vcore, NB Voltage, +3.3V, +5.0V, 5V (SB), Voltage

Battery

Detect the system’s voltage status automatically.

GeForce 6100 AM2 BIOS Setup

Current CPU Temp

This field displays the current temperature of CPU.

Current CPU FAN Speed

This field displays the current speed of CPU fan.

Current SYS FAN Speed

This field displays the current speed SYSTEM fan.

GeForce 6100 AM2 BIOS Setup

1.9 Over Clock Navigator Engine

OverClock Navigator

OverClock .Navigator is designed for beginners in overclock field.

Based on many test and experiments from Biostar Engineer Team, OverClock

Navigator provides 3 default overclock configurations that are able to raise the

system performance

The Choices: Normal (default), Automate Overclock, Manual Overclock

Auto OverClock System

The Overclock Navigator provides 3 different engines helping you to overclock

your system. These engines will boost your system performance to different level.

The Choices:

V6 Tech Engine

This setting will raise about 5%~10% of whole system performance.

V8 Tech Engine

This setting will raise about 15%~25% of whole system performance.

V12 Tech Engine

This setting will raise about 25%~30% of whole system performance.

GeForce 6100 AM2 BIOS Setup

Cautions:

1. Not every AMD CPU performs the above overclock setting ideally; the difference may vary

with the installed CPU model.

2. From BET experiment, the Atholon64 FX CPU is not suitable for this A.O.S. feature.

Manual Overclock System (M.O.S.)

MOS is designed for experienced overclock users.

It allows users to customize personal overclock setting.

Note:

Based on our test results; the overclock function achieved the best performance on AMD

3000+ CPU

CPU Voltage Reguqltor

This item allows you to select CPU Voltage Control.

The Choices: StartUp (default), 1.725V, 1.700V, 1.675V, 1.650V, 1.625V,

1.600V etc.

NB/SB Voltage Ragurator

The Choices: 1.24V (default).1.27V, 1.32V, 1.36V

HT Voltage Regulator

The Choices: 1.23V (default).1.25V, 130V, 1.35V.

GeForce 6100 AM2 BIOS Setup

Memory Voltage

The Choices: 1.85V (default).1.90V, 1.95V, 2.00V

CPU Frequency

This item allows you to select the CPU Frequency.

The Choices: 200 to 450 with an interval of 1. (Default value is 200)

HT Frequency

This item allows you to select the HT Frequency.

The Choices: 4x (default),1x,2x,3x,5x.Auto,x4.

PCIE Clock

The Choices: 100MHz (default), 101MHz, 102MHz, 103MHz, 104MHz,

105MHz, 106MHz, 107MHz, etc.

DRAM Configuration

Timing Mode

The Choices: Auto (Default), Manual.

DRAM Bank (chip-select)Int

The Choices: Enable (Default), Disable.

GeForce 6100 AM2 BIOS Setup

DQS Training Control

The Choices: Perform DQS (Default), Skip DQS

CKE base power down mode

The Choices: Enable (Default), Disable.

CKE base power down

The Choices: per Channel (Default)., Per CS.

Memclock tri-stating

The Choices: Disable (Default), Enable.

Memory Hole Remapping

The Choices: Enable (Default), Disable.

Bottom of UMA DRAM 31:24

The Choices: FC (Default), key in a HEX number between 0000~ 00FC

DDRII Timing Item

The Choices: Disable (Default), Enable.

Twtr Command Delay

The Choices: 3 bus Clocks (Default), 1 bus Clock, 2 bus clocks.

Trfc0 for DIMM0

The Choices: 75ns (Default), 105ns, 127.5ns, 195ns, 327.5ns.

Trfc0 for DIMM1

The Choices: 75ns (Default), 105ns, 127.5ns, 195ns, 327.5ns.

Trfc0 for DIMM2

The Choices: 75ns (Default), 105ns, 127.5ns, 195ns, 327.5ns.

Trfc0 for DIMM3

The Choices: 75ns (Default), 105ns, 127.5ns, 195ns, 327.5ns.

(Twr) Write Recovery

The Choices: 6 bus Clocks(Default), 3 bus Clocks, 4 bus clocks, 5 bus clocks..

(Trip) Precharge Time

The Choices: 3 Clocks(Default), 2 Clock.

(Trc) Row Cycle Time

The Choices: 26 bus Clocks(Default), 11~26 bus Clocks..

GeForce 6100 AM2 BIOS Setup

(Trcd) RAS to CAS R/W Delay

The Choices: 6 Clocks(Default), 3 Clocks, 4 clocks, 5 clocks..

(Trrd) RAS to RAS Delay

The Choices: 5 Clocks(Default), 2 Clocks, 3 clocks, 4 clocks..

(Trp) Row Precharge Time

The Choices: 6 Clocks(Default), 3 Clocks, 4clocks, 5clocks..

(Tras)Minimum RAS Active T

The Choices: 18 bus Clocks(Default), 5~18 bus Clocks..

Watch dog time(times)

The Choices: 3 (default).

Integrated Memory Test

Integrated Memory Test allows users to test memory module compatibilities

without additional device or software.

Step 1:

This item is disabled on default; change it to “Enable” to precede memory test.

GeForce 6100 AM2 BIOS Setup

Step 2:

When the process is done, change the setting back from “Enabled” to “Disabled”

to complete the test.

GeForce 6100 AM2 BIOS Setup

1.10 CMOS Reload Program(C.R.P.)

The CMOS Reload Program (CRP) allows you to save different CMOS settings

into BIOS-ROM. You may reload any saved CMOS setting to change system

configurations. Moreover, you may save your ideal overclock setting for easier

overclocking. There are 50 sets record addresses in total, and you may name the

saved CMOS data individually.

GeForce 6100 AM2 BIOS Setup

2 BIOS Setup (Ver 1.x)

Introduction

The purpose of this manual is to describe the settings in the Award™ BIOS Setup

program on this motherboard. The Setup program allows users to modify the basic

system configuration and save these settings to CMOS RAM. The power of

CMOS RAM is supplied by a battery so that it retains the Setup information when

the power is turned off.

Basic Input-Output System (BIOS) determines what a computer can do without

accessing programs from a disk. This system controls most of the input and output

devices such as keyboard, mouse, serial ports and disk drives. BIOS activates at

the first stage of the booting process, loading and executing the operating system.

Some additional features, such as virus and password protection or chipset

fine-tuning options are also included in BIOS.

The rest of this manual will to guide you through the options and settings in BIOS

Setup.

Plug and Play Support

This AWARD BIOS supports the Plug and Play Version 1.0A specification and

ESCD (Extended System Configuration Data) write.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.

APM Support

This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power

Management (APM) specification. Power management features are implemented

via the System Management Interrupt (SMI). Sleep and Suspend power

management modes are supported. Power to the hard disk drives and video

monitors can also be managed by this AWARD BIOS.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power

interface specification (ACPI). It provides ASL code for power management and

device configuration capabilities as defined in the ACPI specification, developed

by Microsoft, Intel and Toshiba.

GeForce 6100 AM2 BIOS Setup

PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral

Component Interconnect) local bus specification.

DRAM Support

DDR SDRAM (Double Data Rate Synchronous DRAM) is supported.

Supported CPUs

This AWARD BIOS supports the AM2 CPU.

Using Setup

Use the arrow keys to highlight items in most of the place, press <Enter> to select,

use the <PgUp> and <PgDn> keys to change entries, press <F1> for help and press

<Esc> to quit. The following table provides more detail about how to navigate in

the Setup program by using the keyboard.

Keystroke Function

Up arrow Move to previous item

Down arrow Move to next item

Left arrow Move to the item on the left (menu bar)

Right arrow Move to the item on the right (menu bar)

Move Enter Move to the item you desired

PgUp key Increase the numeric value or make changes

PgDn key Decrease the numeric value or make changes

+ Key Increase the numeric value or make changes

- Key Decrease the numeric value or make changes

Esc key Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu – Exit

Current page and return to Main Menu

F1 key General help on Setup navigation keys

F5 key Load previous values from CMOS

F7 key Load the optimized defaults

F10 key Save all the CMOS changes and exit

GeForce 6100 AM2 BIOS Setup

2.1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear

on the screen. The Main Menu allows you to select from several setup functions.

Use the arrow keys to select among the items and press <Enter> to accept and

enter the sub-menu.

 Figure 1: Main Menu

!! WARNING !!

For better system performance, the BIOS firmware is being

continuously updated. The BIOS information described in this

manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference

only. The actual BIOS information and settings on board may

be slightly different from this manual.

GeForce 6100 AM2 BIOS Setup

Standard CMOS Features

This submenu contains industry standard configurable options.

Advanced BIOS Features

This submenu allows you to configure advanced features of the BIOS.

Advanced Chipset Features

This submenu allows you to configure special chipset features.

Integrated Peripherals

This submenu allows you to configure certain IDE hard drive options and

Programmed Input/ Output features.

Power Management Setup

This submenu allows you to configure the power management features.

PnP/PCI Configurations

This submenu allows you to configure certain “Plug and Play” and PCI options.

PC Health Status

This submenu allows you to monitor the hardware of your system.

Frequency/ Voltage Control

This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.

(However, we suggest you to use the default setting. Changing the voltage and

clock improperly may damage the CPU or M/B!)

GeForce 6100 AM2 BIOS Setup

Load Optimized Defaults

This selection allows you to reload the BIOS when problem occurs during system

booting sequence. These configurations are factory settings optimized for this

system. A confirmation message will be displayed before defaults are set.

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor from

making changes using the CMOS Setup Utility. You will be prompted with to

enter a password.

Set User Password

If the Supervisor Password is not set, then the User Password will function in the

same way as the Supervisor Password. If the Supervisor Password is set and the

User Password is set, the “User” will only be able to view configurations but will

not be able to change them.

Save & Exit Setup

Save all configuration changes to CMOS (memory) and exit setup. Confirmation

message will be displayed before proceeding.

Exit Without Saving

Abandon all changes made during the current session and exit setup. Confirmation

GeForce 6100 AM2 BIOS Setup

message will be displayed before proceeding.

Upgrade BIOS

This submenu allows you to upgrade bios.

GeForce 6100 AM2 BIOS Setup

2.2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories.

Each category includes no, one or more than one setup items. Use the arrow keys

to highlight the item and then use the<PgUp> or <PgDn> keys to select the value

you want in each item.

 Figure 2: Standard CMOS Setup

Main Menu Selections

This table shows the items and the available options on the Main Menu.

Item Options Description

Date mm : dd : yy

Set the system date. Note

that the ‘Day’ automatically

changes when you set the

date.

Time hh : mm : ss Set the system internal

clock.

IDE Primary Master Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options

IDE Primary Slave Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

GeForce 6100 AM2 BIOS Setup

Item Options Description

IDE Secondary Master Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

IDE Secondary Slave Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

Drive A

Drive B

360K, 5.25 in

1.2M, 5.25 in

720K, 3.5 in

1.44M, 3.5 in

2.88M, 3.5 in

None

Select the type of floppy

disk drive installed in your

system.

Video

EGA/VGA

CGA 40

CGA 80

MONO

Select the default video

device.

Halt On

All Errors

No Errors

All, but Keyboard

All, but Diskette

All, but Disk/ Key

Select the situation in which

you want the BIOS to stop

the POST process and

notify you.

Base Memory N/A

Displays the amount of

conventional memory

detected during boot up.

Extended Memory N/A

Displays the amount of

extended memory detected

during boot up.

Total Memory N/A Displays the total memory

available in the system.

GeForce 6100 AM2 BIOS Setup

2.3 Advanced BIOS Features

 Figure 3: Advanced BIOS Setup

GeForce 6100 AM2 BIOS Setup

Boot Seq & Floppy Setup

This item allows you to setup boot sequence & Floppy.

Removable Device Priority

Select Removable Boot Device Priority.

The Choices: Floppy Disks, Zip100, USB-FDD0, USB-FDD1, USB-ZIP0,

USB-ZIP1, LS120.

GeForce 6100 AM2 BIOS Setup

Hard Disk Boot Priority

The BIOS will attempt to arrange the Hard Disk boot sequence automatically.

You can change the Hard Disk booting sequence here.

The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB

HDD1, USB HDD2, and Bootable Add-in Cards.

First/Second/Third Boot Device

The BIOS will attempt to load the operating system in this order.

The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,

ZIP100, LAN, HPT370, Disabled.

Boot Other Device

When enabled, BIOS will try to load the operating system from other device when

it failed to load from the three devices above.

The Choices: Enabled (default), Disabled

Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical drive

assignments.

The Choices: Disabled (default), Enabled.

Boot Up Floppy Seek

When enabled, System will test the floppy drives to determine if they have 40 or

80 tracks during boot up. Disabling this option reduces the time it takes to

boot-up.

The Choices: Enabled (default), Disabled.

GeForce 6100 AM2 BIOS Setup

Cache Setup

CPU Internal Cache

Depending on the CPU/chipset in use, you may be able to increase memory

access time with this option.

Enabled (default) Enable cache.

Disabled Disable cache.

External Cache

This option enables or disables “Level 2” secondary cache on the CPU, which

may improve performance.

Enabled (default) Enable cache.

Disabled Disable cache.

GeForce 6100 AM2 BIOS Setup

CPU Feature

AMD K8 Cool&Quiet Control

This function supports AMD Cool ’n’ Quick function.

The Choices: Auto (default),Disable.

GeForce 6100 AM2 BIOS Setup

2.4 Advanced Chipset Features

This submenu allows you to configure the specific features of the chipset installed

on your system. This chipset manage bus speeds and access to system memory

resources, such as DRAM. It also coordinates communications with the PCI bus.

The default settings that came with your system have been optimized and therefore

should not be changed unless you are suspicious that the settings have been

changed incorrectly.

 Figure 4. Advanced Chipset Setup

Frame Buffer Size

The Choices: 32M (default), 16M, 64M, 128M, Disabled.

PMU

The Choices: Auto (default), Disabled.

NB-->SB HT Speed

The Choices: 4X (default).1X, 2X, 3X, 5X.

NB<--SB HT Speed

The Choices: 4X (default).1X, 2X, 3X, 5X.

GeForce 6100 AM2 BIOS Setup

K8<->NB HT Width

The Choices:↓16 ↑16 (default), ↓8 ↑8.

NB<->SB HT Width

The Choices: ↓8 ↑8 (default), ↓16 ↑16.

Err94 Enh

This item allows you to enable/disable the “sequential Prufetch Feature” of K8

CPU.

The Choices: Auto (default), Disabled.

Onboard GPU

The Choices: Auto (default), Always Enable.

CPU Spread Spectrum

The Choices: Disabled (default), Center, Down.

PCIE Spread Spectrum

This item allows you to disable \ enable the SATA spread spectrum function.

The Choices: Disabled (default), Enabled.

SATA Spread Spectrum

This item allows you to disable \ enable the SATA spread spectrum function.

The Choices: Disabled (default), Enabled.

HT Spread Spectrum

The Choices: Disabled (default), Center, Down.

SSE/SSE2 Instructions

The Choices: Enabled (default), Disabled.

GeForce 6100 AM2 BIOS Setup

System BIOS Cacheable

Selecting the “Disabled ” option allows caching of the system BIOS ROM at

F0000h-FFFFFh which can improve system performance. However, any programs

writing to this area of memory will cause conflicts and result in system errors.

The Choices: Disabled (default), Enabled.

GeForce 6100 AM2 BIOS Setup

2.5 Integrated Peripherals

 Figure 5. Integrated Peripherals

GeForce 6100 AM2 BIOS Setup

IDE Function Setup

Highlight the “Press Enter” label next to the “VIA OnChip IDE Device” label and

press enter key will take you a submenu with the following options:

On-chip IDE Channel 0/1

The motherboard chipset contains a PCI IDE interface with support for two IDE

channels. Select “Enabled” to activate the first and/or second IDE interface.

Select “Disabled” to deactivate an interface if you are going to install a primary

and/or secondary add-in IDE interface.

The Choices: Enabled (default), Disabled.

IDE Primary/Secondary/Master/Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for

each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4

will increase performance progressively. In Auto mode, the system automatically

determines the best mode for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

IDE Primary/Secondary/Master/Slave UDMA

Ultra DMA function can be implemented if it is supported by the IDE hard drives

in your system. As well, your operating environment requires a DMA driver

(Windows 95 or OSR2may need a third party IDE bus master driver). If your hard

drive and your system software both support Ultra DMA, select Auto to enable

BIOS support.

The Choices: Auto (default), Disabled.

GeForce 6100 AM2 BIOS Setup

IDE DMA Transfer Access

This item allows you to enable or disable the IDE DMA transfer access.

The Choices: Enabled (default), Disabled.

OnChip SATA Controller

This option allows you to enable the on-chip Serial ATA.

The Choices: Disabled, All Disabled (default).

IDE Prefetch Mode

The “onboard” IDE drive interfaces supports IDE prefetch function for faster

drive access. If the interface on your drive does not support prefetching, or if you

install a primary and/or secondary add-in IDE interface, set this option to

“Disabled”.

The Choices: Enabled (default), Disabled.

RAID Config

RAID Enable

This option allows you to enable or disable RAID function.

The Choices: Disabled (default), Enabled.

SATA 1/2 Primary/Secondary RAID

This option allows you to enable or disable SATA A Primary/Secondary RAID.

The Choices: Disabled (default), Enabled.

GeForce 6100 AM2 BIOS Setup

Super IO Device

Press Enter to configure the Super I/O Device.

Power On Function

This item allows you to choose the power on method.

The Choices: Button Only (default), Password, Hot Key, Mouse Move / Click,

Mouse Double Click, Any Key, Keyboard 98.

KB Power on Password

Input password and press Enter to set the Keyboard power on password.

HOT Key power ON

Choose the Hot Key combination to boot up the system.

The Choices: Ctrl-F1 (default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6,

Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, Ctrl-F12.

Onboard FDC Controller

Select enabled if your system has a floppy disk controller (FDC) installed on the

system board and you wish to use it. If you installed another FDC or the system

uses no floppy drive, select disabled in this field.

The Choices: Enabled (default), Disabled.

GeForce 6100 AM2 BIOS Setup

Onboard Serial Port 1

Select an address and corresponding interrupt for the first and second serial ports.

The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,

Auto.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller with

which I/O Address.

The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

This item allows you to determine how the parallel port should function. The

default value is SPP.

The Choices:

SPP (default) Using Parallel port as Standard Printer Port.

EPP Using Parallel Port as Enhanced Parallel Port.

ECP Using Parallel port as Extended Capabilities Port.

ECP+EPP Using Parallel port as ECP & EPP mode.

ECP Mode Use DMA

Select a DMA Channel for the port.

The Choices: 3 (default), 1.

OnChip USB

This option should be enabled if your system has a USB installed on the system

board. You may need to disable this feature if you add a higher performance

controller.

The Choices: V1.1+V2.0 (default), Disabled, V1.1

USB Memory Type

The item allows you select the type of USB Memory.

The Choices: SHADOW, Base Memory(640K) (default).

GeForce 6100 AM2 BIOS Setup

USB Keyboard Support

This item allows you to enable or disable the USB Keyboard Legacy Support.

Enabled Enable USB Keyboard Support.

Disabled (default) Disable USB Keyboard Support.

USB Mouse Support

This item allows you to enable or disable the USB Mouse Legacy Support.

Enabled Enable USB Mouse Support.

Disabled (default) Disable USB Mouse Support.

Onboard AC97 Audio

This item allows you to enable or disable to support AC97 Audio.

The Choices: Auto (default), Disabled.

MAC LAN

This option allows you to control the onboard MAC LAN.

The Choices: Auto (default), Disabled.

Onboard LAN Boot ROM

This item allows you to enable or disable the Onboard LAN Boot ROM.

The Choices: Disabled (default), Enabled.

MAC Media Interface

The Choices: Pin Strap (default).MII.

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector

read / write. If your IDE hard drive supports block mode (most new drives

do),select Enabled for automatic detection of the optimal number of block

mode(most new drives do), select Enabled for automatic detection of the

optimalnumber of block read / write per sector where the drive can support.

The Choices: Enabled (default), Disabled.

GeForce 6100 AM2 BIOS Setup

POWER After PWR-Fail

This setting specifies how your system should behave after a power fail or

interrupts occurs. By choosing off will leave the computer in the power off state.

Choosing On will reboot the computer. Former-Sts will restore the system to the

status before power failure or interrupt occurs.

The Choices: Off (default), On, Former-Sts.

GeForce 6100 AM2 BIOS Setup

2.6 Power Management Setup

The Power Management Setup Menu allows you to configure your system to

utilize energy conservation and power up/power down features.

 Figure 6. Power Management Setup

ACPI function

This item displays the status of the Advanced Configuration and Power

Management (ACPI).

The Choices: Enabled (default), Disabled.

ACPI Suspend Type

The item allows you to select the suspend type under the ACPI operating system.

The Choices: S1 (POS) (default) Power on Suspend

S3 (STR) Suspend to RAM

S1+S3 POS+STR

GeForce 6100 AM2 BIOS Setup

Power Management

This category allows you to select the power saving method and is directly related

to the following modes:

1. HDD Power Down.

2. Suspend Mode.

There are three options of Power Management, three of which have fixed mode

settings

Min. Power Saving

Minimum power management.

Suspend Mode = 1 hr.

HDD Power Down = 15 min

Max. Power Saving

Maximum power management only available for sl CPU’s.

Suspend Mode = 1 min.

HDD Power Down = 1 min.

User Define (default)

Allow you to set each option individually.

When you choose user define, you can adjust each of the item from 1 min. to 1 hr.

except for HDD Power Down which ranges from 1 min. to 15 min.

Video Off Method

This option determines the manner when the monitor goes blank.

V/H SYNC+Blank

This selection will cause the system to turn off the vertical and horizontal

synchronization ports and write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video buffer.

DPMS Support (default)

Initial display power management signaling.

HDD Power Down

When enabled, the hard-disk drives will power down after a set time of system

inactivity. All other devices remain active.

The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7

Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.

GeForce 6100 AM2 BIOS Setup

Soft-Off by PWR-BTN

This item determines the behavior of system power button. Instant off turn off the

power immediately, and Delay 4 Sec. will require you to press and hold the power

button for 4 seconds to cut off the system power.

The Choices: Delay 4 Sec, Instant-Off (default).

WOL(PME#)/ From Soft-Off

This item allows you to enable or disable Wake On LAN from Soft-Off function.

The Choices: Disabled (default), Enabled.

WOR(RI#) From Soft-Off

This item allows you to enable or disable Wake On Ring from Soft-Off function.

The Choices: Disabled (default), Enabled.

USB Resume from S3/S4

This item allows you to wake up from S3 with USB device.

The Choices: Disabled (default), Enabled.

Power-On by Alarm

This function is for setting date and time for your computer to boot up. When

enabled, you can choose the date and time to boot up the system.

The Choices: Disabled (default), Enabled.

Date (of Month) Alarm

You can choose which month the system will boot up.

Time (hh:mm:ss) Alarm

You can choose the system boot up time, input hour, minute and second to specify.

Note: If you have change the setting, you must let the system boot up until it goes

to the operating system, before this function will work.

GeForce 6100 AM2 BIOS Setup

2.7 PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or Personal Computer

Interconnect, is a system which allows I/O devices to operate at speeds nearing the

speed of the CPU itself uses when communicating with its own special

components. This section covers some very technical items and it is strongly

recommended that only experienced users should make any changes to the default

settings.

 Figure 7: PnP/PCI Configurations

GeForce 6100 AM2 BIOS Setup

Init Display First

This item allows you to decide to active whether PCI Slot or on-chip VGA first.

The Choices: PCEx, Onboard ,PCI Slot (default).