Biostar Gf8200 M2G Plus Owners Manual N78SD M2S

2014-07-31

: Biostar Biostar-Gf8200-M2G-Plus-Owners-Manual biostar-gf8200-m2g-plus-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 51

Download
Open PDF In Browser	View PDF

GF8200 M2G+ Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents
Chapter 1: Introduction ............................................................ 1
1.1
Before You Start ................................................................................ 1
1.2
Package Checklist ............................................................................. 1
1.3
Motherboard Features...................................................................... 2
1.4
Rear Panel Connectors ..................................................................... 3
1.5
Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation ............................................. 5
2.1
Installing Central Processing Unit (CPU)....................................... 5
2.2
FAN Headers...................................................................................... 7
2.3
Installing System Memory ................................................................ 8
2.4
Connectors and Slots ....................................................................... 10
Chapter 3: Headers & Jumpers Setup ..................................... 12
3.1
How to Setup Jumpers .................................................................... 13
3.2
Detail Settings.................................................................................. 13
Chapter 4: RAID Functions ..................................................... 18
4.1
Operating System............................................................................ 18
4.2
Raid Arrays ...................................................................................... 18
4.3
How RAID Works............................................................................. 18
Chapter 5: Useful Help ............................................................ 22
5.1
Driver Installation Note.................................................................. 22
5.2
Software............................................................................................ 23
5.3
Extra Information............................................................................ 27
5.4
AMI BIOS Beep Code....................................................................... 29
5.5
Troubleshooting............................................................................... 30
Appendix: SPEC In Other Languages ...................................... 31
German.................................................................................................................. 32
French .................................................................................................................... 34
Italian..................................................................................................................... 36
Spanish ................................................................................................................... 38
Portuguese ............................................................................................................ 40
Polish...................................................................................................................... 42
Russian ................................................................................................................... 44
Arabic..................................................................................................................... 46
Japanese ................................................................................................................ 48

GF8200 M2G+

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.

PACKAGE CHECKLIST
HDD Cable X 1
Serial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
Socket AM2+ / AM3

CPU

AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2
/ Sempron / Phenom / Phenom II processors
(Maximum Watt: 95W)

FSB
Chipset

Supports Hyper Transport 3.0 and PowerNow

Supports up to 5.2 GT/s Bandwidth
GeForce 8200
Low Pin Count Interface

Provides the most commonly used legacy
Super I/O functionality

Environment Control initiatives
H/W Monitor
ITE's "Smart Guardian" function

DDR2 DIMM Slots x 2

Dual Channel Mode DDR2 memory module

Main

Max Memory Capacity 8GB

Supports DDR2 533 / 667 / 800

Memory

Each DIMM supports 256MB/512MB/

Supports DDR2 1066 (by AM2+ / AM3 CPU)

1GB/2GB/4GB DDR2

Registered DIMM and ECC DIMM is not supported

Graphics

Integrated in GeForce 8200 Chipset

IDE

Integrated IDE Controller

SATA II

Integrated Serial ATA Controller

LAN

Realtek RTL 8111DL

Sound

ALC662

Slots
On Board

Max Shared Video Memory is 512MB
DX10 / HDCP / PureVideo support
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
Data transfer rates up to 3 Gb/s
SATA Version 2.0 specification compliant
10 / 100 Mb/s / 1Gb/s auto negotiation
Half / Full duplex capability
5.1 channels audio out
High Definition Audio

PCI Express Gen2 x16 Slot

Supports PCI-E Gen2 x16 expansion cards

PCI Slot

Supports PCI expansion cards

Floppy Connector

Each connector supports 2 Floppy drives

Each connector supports 2 IDE device

SATA Connector

Each connector supports 1 SATA devices

Front Panel Connector

Supports front panel facilities

Connectors IDE Connector

computing

Support HyperTransport 3.0

ITE 8718
Super I/O

AMD 64 Architecture enables 32 and 64 bit

GF8200 M2G+
SPEC

Back Panel
I/O

Front Audio Connector

Supports front panel audio function

CD-in Connector

Supports CD audio-in function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

CMOS clear Header

Restore CMOS data to factory default

USB Connector

Each connector supports 2 front panel USB ports

Power Connector (24pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

Printer Port Connector

Each connector supports 1 Printer port

Serial port Connector

Connects to RS-232 Port

PS/2 Keyboard

Connects to PS/2 Keyboard

PS/2 Mouse

Connects to PS/2 Mouse

DVI port

Connect to DVI-D monitor

VGA port

Connect to D-SUB monitor

LAN port

Connect to RJ-45 ethernet cable

USB Port

Connect to USB devices

Audio Jack

Provide Audio-In/Out and microphone connection

Board Size

190 mm(W) x 244 mm(L)

Special

RAID 0 / 1 / 5 / 0+1 support

Features

Hybrid SLI support (by nVIDIA driver)

OS Support Windows XP / Vista 32 / Vista 64

1.4

Biostar reserves the right to add or remove support
for any OS With or without notice.

REAR PANEL CONNECTORS
LAN

PS/2
Mouse

Line In/
Surround
Line Out
Mi c I n 1/
Bass/ Center

PS/ 2
Keyboar d

VGA

DVI- D

USBX2

Motherboard Manual

1.5

MOTHERBOARD LAYOUT

KBMS1

CPU_FAN1

ATXPW R2

DIMMB1
JKB_PW R1

DIMMA1
VG A 1

S ocket

AM 2+

DVI1
JUSBV1

USB1

ATXPWR1

SATA4

RJ45USB1

AUDIO1

IDE 1

SATA3

GeForce
8200

SATA2
SATA1

CD_IN1

JCMOS1

PEX16_1

LAN

BAT1

PCI1

BIOS

Super I/O

F_USB1

PCI2

Codec

J USBV2
F_USB2

SYS_FAN1

FDD1
F_AUDIO1

F_PRINT1

F_COM1

Note: ■ represents the 1st pin.

PANEL1

GF8200 M2G+

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

Motherboard Manual
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN. This completes the installation.

Note: Please update the BIOS to the latest version while using AM2+ / AM3 CPUs. Due to the latest
CPU transition, you may encounter the situation that the new system failed to boot while
using new AM2+ / AM3 CPUs. In this case, please install one standard AM2 CPU to boot
your system, and update the latest BIOS from our website for AM2+ / AM3 CPUs support.

GF8200 M2G+

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header
1

4
Pin
1
2
3
4

Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)

SYS_FAN1: System Fan Header

Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense

Note:
The CPU_FAN1 supports 4-pin head connector. The SYS_FAN1 supports 3-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

A. Memory Modules

DIMMB1
DIMMA1

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

GF8200 M2G+

B. Memory Capacity
DIMM Socket
Location

DDR2 Module

DIMMA1

256MB/512MB/1GB/2GB/4GB

DIMMB1

256MB/512MB/1GB/2GB/4GB

Total Memory
Size
Max is 8GB.

C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status

DIMMA1

DIMMB1

Disabled

Enabled

(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.

IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
SATA4
SATA3
SATA2
SATA1

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

GF8200 M2G+

PEX16_1: PCI-Express Gen2 x16 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.0 architecture.

PEX16_1

PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

Motherboard Manual

ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

ATXPWR2: ATX Power Source Connector
Connecting this connector will provide +12V to CPU power circuit.
2 1

Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

Note:
Before power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
12

GF8200 M2G+

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/ Off
+ + -

9
1

16
8

+ SPK

RST
HLED

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function
N/A
N/A
Power LED
Power-on button

Motherboard Manual

F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

CD_IN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the variaty devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Pin
1

4
1

2
3
4

Assignment
Left Channel
Input
Ground
Ground
Right Channel
Input

GF8200 M2G+

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1

Pin 1-2 Close:
Normal Operation (Default).

3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.

F_COM1: Serial port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.

Assignment

1
2
3
4
5
6
7
8
9
10

Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC

Motherboard Manual

F_PRINT1: Printer Port Connector
This header allows you to connect printer port on the PC.
2
1

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13

Assignment

Pin
14
15
16
17
18
19
20
21
22
23
24
25
26

-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5

Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

F_USB1 F_USB2
2
10
1
16

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
NC
Key

GF8200 M2G+

JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB1/RJ45USB1.
JUSBV2: +5V for USB ports at front panel (F_USB1/F_USB2).
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB1/ RJ45USB1.
JUSBV2: +5V STB for USB ports at front panel (F_USB1/F_USB2).

JUSBV1
1

3
Pin 1-2 close

3
1

JUSBV2

3
Pin 2-3 close

JKB_PWR1: Power Source Header for PS/2 Keyboard and Mouse
1
3

1
3
Pin 1-2 close
+5V for PS/2 keyboard and
mouse.

1
3
Pin 2-3 close
+5V STB for PS/2 keyboard
and mouse.

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS
4.1

OPERATING SYSTEM

Supports Windows XP Home/Professional Edition, and Windows Vista 32 / 64.

4.2

RAID ARRAYS

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 0+1: RAID 0+1 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.

4.3

HOW RAID WORKS

RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment.
This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits
-

Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files.
No capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

GF8200 M2G+

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on
a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if
the active volume or drive is corrupted or becomes unavailable because of a hardware
failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and less
reliable media.

Features and Benefits
-

Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.

Block 1
Block 2
Block 3

Motherboard Manual

RAID 0+1:
RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1
solution for improved performance plus resiliency.

Features and Benefits
-

Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID
levels in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.

GeForce
8200

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

GF8200 M2G+

RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained
by ensuring that the parity information for any given block of data is placed on a
different drive from those used to store the data itself.

Features and Benefits
-

Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk.
Write performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY

Disk 2

GeForce
8200

DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11

Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12

※

For more detailed setup information, please refer to the Driver CD, or go to
http://www.nvidia.com/object/IO_28159.html to download the NVIDIA RAID User’s Guide.

Motherboard Manual

CHAPTER 5: USEFUL HELP
5.1

DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
22

GF8200 M2G+

5.2

SOFTWARE

Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you

must provide. Wi thout
this information, you may
not be able to send out
the mail.

This bl ock will show
the i nformation which
would be collected in
the mail .

conditi on
*Describe
of your system.

your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.

Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.

Exi t thi s dialog.

Save these in forma tion to a .txt file

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

GF8200 M2G+

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS

Show current BIOS information

AMI BIOS

Clear CMOS function
(Only for AWARD BIOS)

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.
25

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
26

GF8200 M2G+

5.3

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

Motherboard Manual

BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

GF8200 M2G+

5.4

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
29

Motherboard Manual

5.5

TROUBLESHOOTING
Probable

There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.

Solution
1.
2.
3.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

GF8200 M2G+

This page is intentionally left blank.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Sockel AM2+ / AM3
AMD Athlon 64 / Athlon 64 FX / Althlon 64 Die AMD 64-Architektur unterstützt eine 32-Bit- und
CPU

X2 / Sempron / Phenom / Phenom II

64-Bit-Datenverarbeitung

Prozessoren

Unterstützt Hyper Transport 3.0 und PowerNow

(Maximales Watt: 95W)
FSB
Chipsatz

Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
GeForce 8200
ITE8718

Super E/A

Bietet die häufig verwendeten alten Super
E/A-Funktionen.

DDR2 DIMM-Steckplätze x 2
Arbeitsspeich Max. 8GB Arbeitsspeicher
er

Jeder DIMM unterstützt 256MB/512MB/
1GB/2GB/4GB DDR2.

Grafik

Integrierter GeForce 8200-Chipsatz

IDE

Integrierter IDE-Controller

Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE
Dual-Kanal DDR2 Speichermodul
Unterstützt DDR2 533 / 667 / 800
Unterstützt DDR2 1066 (by AM2+ / AM3 CPU)
registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.
Max. 512MB gemeinsam benutzter Videospeicher
Unterstützt DX10 / HDCP / PureVideo
Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus
Unterstützt PIO-Modus 0~4,

SATA

Integrierter Serial ATA-Controller

Datentransferrate bis zu 3 Gb/s
Konform mit der SATA-Spezifikation Version 2.0.

LAN

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion

HD
Audio-Unters ALC662
tützung

5.1-Kanal-Audioausgabe
Unterstützt High-Definition Audio

GF8200 M2G+
Spezifikationen
Steckplätze

Onboard-Ans
chluss

Rückseiten-E
/A

Platinengröß

PCI Express Gen2 x16 Steckplatz

PCI-Steckplatz

Diskettenlaufwerkanschluss

Jeder Anschluss unterstützt 2 Diskettenlaufwerke

IDE-Anschluss

Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss

Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

CD-IN-Anschluss

Unterstützt die CD Audio-In-Funktion

CPU-Lüfter-Sockel

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

Stromanschluss (24-polig)

Stromanschluss (4-polig)

Druckeranschluss Anschluss

Serieller Anschluss

PS/2-Tastatur

PS/2-Maus

VGA-Anschluss

LAN-Anschluss

USB-Anschluss

Audioanschluss

DVI-Anschluss

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse

Jeder Anschluss unterstützt 1 Druckeranschluss

190 mm (B) X 244 mm (L)

e
Sonderfunkti Unterstützt RAID 0 / 1 / 5 / 0+1
onen
OS-Unterstü
tzung

Unterstützt Hybrid SLI (by nVIDIA driver)
Biostar behält sich das Recht vor, ohne Ankündigung
Windows XP / Vista 32 / Vista 64

die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
Socket AM2+ / AM3
Processeurs AMD Athlon 64 / Athlon 64 FX
UC

/ Althlon 64 X2 / Sempron / Phenom /
Phenom II

L'architecture AMD 64 permet le calcul 32 et 64 bits
Prend en charge Hyper Transport 3.0 et PowerNow

(Watt maximum : 95W)
Bus frontal
Chipset

Prend en charge Hyper Transport 3.0
jusqu'à une bande passante de 5.2 GT/s
GeForce 8200
Interface à faible compte de broches

ITE 8718
Super E/S

Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.

Module de mémoire DDR2 à mode à double voie

Mémoire

Capacité mémoire maximale de 8 Go

principale

Chaque DIMM prend en charge des DDR2
de 256Mo/512Mo/1Go/2Go/4Go

LAN

Realtek RTL 8111DL

Connecteur
embarqué

Mémoire vidéo partagée maximale de 512 Mo
Prise en charge DX10 / HDCP / PureVideo

Prend en charge le mode PIO 0~4,

Conforme à la spécification SATA Version 2.0
10 / 100 / 1000 Mb/s négociation automatique
Half / Full duplex capability
Sortie audio à 5.1 voies

ALC662

Prise en charge de l'audio haute définition

audio HD
Fentes

Les DIMM à registres et DIMM avec code correcteurs

Taux de transfert jusqu'à 3 Go/s.

Prise en
charge

Prend en charge la DDR2 1066 (by AM2+ / AM3 CPU)

Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133

Contrôleur IDE intégré

Contrôleur Serial ATA intégré

Prend en charge la DDR2 533 / 667 / 800

d'erreurs ne sont pas prises en charge

Graphiques Integré dans la chipset GeForce 8200

SATA

Moniteur de matériel
Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 2

IDE

Initiatives de contrôle environnementales,

Fente PCI Express Gen2 x16

Fente PCI

Connecteur de disquette

Connecteur IDE

Connecteur SATA

Chaque connector prend en charge 2 lecteurs de
disquettes
Chaque connecteur prend en charge 2 périphériques
IDE
Chaque connecteur prend en charge 1 périphérique
SATA

GF8200 M2G+
SPEC
Connecteur du panneau avant

Connecteur Audio du panneau avant x1
Connecteur d'entrée CD

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

Connecteur d'alimentation

Prend en charge les équipements du panneau avant
Prend en charge la fonction audio du panneau avant
Prend en charge la fonction d'entrée audio de CD
Alimentation électrique du ventilateur UC (avec
fonction de ventilateur intelligent)
Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB de
panneau avant

(24 broches)
Connecteur d'alimentation

(4 broches)
Connecteur de Port d'imprimante

Connecteur de Port série

Clavier PS/2

Souris PS/2

E/S du

Port VGA

panneau

Port LAN

arrière

Port USB

Fiche audio

Port DVI

Chaque connector prend en charge 1 Port
d'imprimante

Dimension
s de la

190 mm (l) X 244 mm (H)

carte
Fonctionnal Prise en charge RAID 0 / 1 / 5 / 0+1
ités

Prise en charge Hybrid SLI (by nVIDIA

spéciales

driver)

Support SE Windows XP / Vista 32 / Vista 64

Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
SPECIFICA
Socket AM2+ / AM3
Processori AMD Athlon 64 / Athlon 64 FX L’architettura AMD 64 abilita la co mputazione 32
CPU

/ Althlon 64 X2 / Sempron / Phenom / e 64 bit
Supporto di Hyper Transport 3.0 e PowerNow

Phenom II
(Watt massimo: 95W)
FSB
Chipset

Supporto di HyperTransport 3.0 fino a
5.2 GT/s di larghezza di banda
GeForce 8200
Interfaccia LPC (Low Pin Count)

ITE 8718
Super I/O Fornisce le funzionalità legacy Super
I/O usate più comunemente.

Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR2 x 2

Modulo di memoria DDR2 a canale doppio

Memoria

Capacità massima della memoria 8GB

Supporto di DDR2 533 / 667 / 800

principale

Ciascun DIMM supporta DDR2

Supporto di DDR2 1066 (by AM2+ / AM3 CPU)

256MB/512MB/1GB/2GB/4GB

DIMM registrati e DIMM ECC non sono supportati

Grafica

Integrata nel Chipset GeForce 8200

IDE

Controller IDE integrato

La memoria video condivisa massima è di 512 MB
Supporto DX10 / HDCP / PureVideo
Modalità Bus Master Ultra DMA 33 / 66 / 100 /
133
Supporto modalità PIO Mode 0-4

SATA

Controller Serial ATA integrato

LAN

Realtek RTL 8111DL

Supporto
audio HD
Alloggi

Velocità di trasferimento dei dati fino a 3 Gb/s.
Compatibile specifiche SATA Versione 2.0.
Negoziazione automatica 10 / 100 / 1000 Mb/s
Capacità Half / Full Duplex
Uscita audio 5.1 canali

ALC662

Supporto audio High-Definit ion (HD)

Alloggio PCI Express Gen2 x16 x1
Alloggio PCI

Connettori Connettore floppy

Ciascun connettore supporta 2 unità Floppy

su scheda Connettore IDE

Ciascun connettore supporta 2 unità IDE

GF8200 M2G+
SPECIFICA
Connettore SATA

Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale

Supporta i servizi del pannello frontale

Connettore audio frontale

Supporta la funzione audio pannello frontale

Connettore CD-in

Supporta la funzione input audio CD

Collettore ventolina CPU

Collettore ventolina sistema

Collettore cancellaz ione CMOS

Connettore USB

Connettore alimentazione

Alimentazione ventolina CPU (con funzione Smart
Fan)
Alimentazione ventolina di sistema

Ciascun connettore supporta 2 porte USB
pannello frontale

(24 pin)
Connettore alimentazione

(4 pin)
Connettore Porta stampante

Connettore Porta seriale

Tastiera PS/2

Mouse PS/2

I/O

Porta VGA

pannello

Porta LAN

posteriore Porta USB

Dimension
i scheda

Connettore audio

Porta DVI

Ciascun connettore supporta 1 Porta stampante

190 mm (larghezza) x 244 mm
(altezza)

Caratterist Supporto RAID 0 / 1 / 5 / 0+1
iche

Supporto Hybrid SLI (by nVIDIA

speciali

driver)

Sistemi
operativi
supportati

Biostar si riserva il diritto di aggiungere o
Windows XP / Vista 32 / Vista 64

rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
Conector AM2+ / AM3
Procesadores AMD Athlon 64 / Athlon 64
CPU

FX / Athlon 64 X2 / Sempron / Phenom /
Phenom II

Conjunto
de chips

de banda de hasta 5.2 GT/s
GeForce 8200
Interfaz de cuenta Low Pin

Le ofrece las funcionalidades heredadas
de uso más común Súper E/S.

Capacidad máxima de memoria de 8GB

principal

Cada DIMM admite DDR de 256MB/

Admite DDR2 de 1066 (by AM2+ / AM3 CPU)

ECC

Integrados en el conjunto de chips

Memoria máxima de vídeo compartida de 512 MB

GeForce 8200

Admite DX10 / HDCP / PureVideo

IDE

Controlador IDE integrado

SATA

Controlador ATA Serie Integrado

Red Local

Realtek RTL 8111DL

Ranuras

Admite DDR2 de 533 / 667 / 800

No admite DIMM registrados o DIMM compatibles con

512MB/1GB/2GB/4GB

sonido HD

Monitor hardware

Módulo de memoria DDR2 de canal Doble

Memoria

Soporte de

Iniciativas de control de entorno,

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 2

Gráficos

Soporta las tecnologías Hyper Transport 3.0 y

Admite HyperTransport 3.0 con un ancho

ITE 8718
Súper E/S

64 bits

PowerNow

(Vatio máximo: 95W)
FSB

La arquitectura AMD 64 permite el procesado de 32 y

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2.0.
Negociación de 10 / 100 / 1000 Mb/s
Funciones Half / Full dúplex
Salida de sonido de 5.1 canales

ALC662

Soporte de sonido Alta Definición

Ranura PCI Express Gen2 x16

Ranura PCI

Conectores Conector disco flexible

Cada conector soporta 2 unidades de disco flexible

en placa

Cada conector soporta 2 dispositivos IDE

Conector IDE

GF8200 M2G+
Especificación
Conector SATA

Cada conector soporta 1 dispositivos SATA

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

Conector de entrada de CD

Soporta función de entrada de sonido de CD

Cabecera de ventilador de CPU

Fuente de alimentación de ventilador de CPU (con
función Smart Fan)

Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

Fuente de alimentación de ventilador de sistema

Cada conector soporta 2 puertos USB frontales

(24 patillas)
Conector de alimentación

(4 patillas)
Conector Puerto de impresora

Conector Puerto serie

Teclado PS/2

Ratón PS/2

Panel

Puerto VGA

trasero de

Puerto de red local

E/S

Puerto USB

Conector de sonido

Puerto DVI

Tamaño de
la placa

190 mm. (A) X 244 Mm. (H)

Funciones

Admite RAID 0 / 1 / 5 / 0+1

especiales

Admite Hybrid SLI (by nVIDIA driver)

Soporte de
sistema
operativo

Cada conector soporta 1 Puerto de impresora

Windows XP / Vista 32 / Vista 64

Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES
Socket AM2+ / AM3
Processadores AMD Athlon 64 / Athlon 64
CPU

FX / Althlon 64 X2 / Sempron / Phenom /
Phenom II

Chipset
Especificaç
ão Super
I/O

Memória
principal

Placa
gráfica

32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0 e
PowerNow

(Watt máximo: 95W)
FSB

A arquitectura AMD 64 permite uma computação de

Suporta a tecnologia HyperTransport 3.0
com uma largura de banda até 5.2 GT/s
GeForce 8200
ITE 8718

Interface LPC (Low Pin Count).

Proporciona as funcionalidades mais

Iniciativas para controlo do ambiente

utilizadas em termos da especificação

Monitorização do hardware

Super I/O.

Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x 2

Módulo de memória DDR2 de canal duplo

Capacidade máxima de memória: 8 GB

Suporta módulos DDR2 533 / 667 / 800

Cada módulo DIMM suporta uma

Suporta módulos DDR2 1066 (by AM2+ / AM3 CPU)

memória DDR2 de 256MB/512MB/

Os módulos DIMM registados e os DIMM ECC não são

1GB/2GB/4GB

suportados
Memória de vídeo máxima partilhada: 512 MB

Integrada no chipset GeForce 8200

IDE

Controlador IDE integrado

SATA

Controlador Serial ATA integrado

LAN

Realtek RTL 8111DL

Suporta as funções DX10 / HDCP / PureVideo
Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,
Velocidades de transmissão de dados até 3 Gb/s.
Compatibilidade com a especificação SATA versão 2.0.
Auto negociação de 10 / 100 / 1000 Mb/s
Capacidade semi/full-duplex

Suporte
para áudio
de alta

Saída de áudio de 5.1 canais

ALC662

Suporta a especificação High-Definition Audio

definição
Ranhuras

Ranhura PCI Express Gen2 x16
Ranhura PCI

x1
x2

Conectores Conector da unidade de disquetes

Cada conector suporta 2 unidades de disquetes

na placa

Conector IDE

Cada conector suporta 2 dispositivos IDE

Conector SATA

Cada conector suporta 1 dispositivo SATA

GF8200 M2G+
ESPECIFICAÇÕES
Conector do painel frontal

Para suporte de várias funções no painel frontal

Conector de áudio frontal

Suporta a função de áudio no painel frontal

Conector para entrada de CDs

Conector da ventoinha da CPU

Conector da ventoinha do sistema x1
Conector para limpeza do CMOS

Suporta a entrada de áudio a partir de CDs
Alimentação da ventoinha da CPU (com a função
Smart Fan)
Alimentação da ventoinha do sistema

Conector USB

Conector de alimentação

Cada conector suporta 2 portas USB no painel frontal

(24 pinos)
Conector de alimentação

(4 pinos)

Entradas/S
aídas no
painel
traseiro

Tamanho
da placa

Conector da para impressora

Conector da Porta série

Teclado PS/2

Rato PS/2

Porta VGA

Porta LAN

Porta USB

Tomada de áudio

Porta DVI

Cada conector suporta 1 Porta para impressora

190 mm (L) X 244 mm (A)

Característi Suporta as funções RAID 0 / 1 / 5 / 0+1
cas

Suporta as funções Hybrid SLI (by nVIDIA

especiais

driver)

Sistemas
operativos
suportados

A Biostar reserva-se o direito de adicionar ou remover
Windows XP / Vista 32 / Vista 64

suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC
Socket AM2+ / AM3
AMD Athlon 64 / Athlon 64 FX / Althlon 64 Architektura AMD 64 umożliwia przetwarzanie 32 i 64
Procesor

X2 / Sempron / Phenom / Phenom II

bitowe

Procesory

Obsługa Hyper Transport 3.0 oraz PowerNow

(Maksymalny Watt: 95W)
FSB
Chipset

Obsługa HyperTransport 3.0 o szerokości
pasma do 5.2 GT/s
GeForce 8200
Gniazda DDR2 DIMM x 2

Moduł pamięci DDR2 z trybem podwójnego kanału

Pamięć

Maks. wielkość pamięci 8GB

Obsługa DDR2 533 / 667 / 800

główna

Każde gniazdo DIMM obsługuje moduły

Obsługa DDR2 1066 (by AM2+ / AM3 CPU)

256MB/512MB/1GB/2GB/4GB DDR2

Brak obsługi Registered DIMM oraz ECC DIMM
Interfejs Low Pin Count

ITE 8718
Super I/O

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne

Monitor H/W

funkcje Super I/O.

Funkcja ITE "Smart Guardian"
Maks. wielkość współdzielonej pamięci video wynosi

Grafika

Zintegrowana w chipsecie GeForce 8200

512 MB
Obsługa DX10 / HDCP / PureVideo

IDE

Zintegrowany kontroler IDE

SATA

Zintegrowany kontroler Serial ATA

LAN

Realtek RTL 8111DL

Obsługa
audio HD
Gniazda

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsługa PIO tryb 0~4,
Transfer danych do 3 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0.
10 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości
Działanie w trybie połowicznego / pełnego dupleksu
5.1 kanałowe wyjście audio

ALC662

Obsługa High-Definition Audio

Gniazdo PCI Express Gen2 x16

Gniazdo PCI

Złącza

Złącze napędu dyskietek

Każde złącze obsługuje 2 napędy dyskietek

wbudowan

Złącze IDE

Każde złącze obsługuje 2 urządzenia IDE

Złącze SATA

Każde złącze obsługuje 1 urządzenie SATA

GF8200 M2G+
SPEC
Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącze wejścia CD

Obsługa funkcji wejścia audio CD

Złącze główkowe wentylatora procesora

Zasilanie wentylatora procesora (z funkcją Smart Fan)

x1
Złącze główkowe wentylatora

Zasilanie wentylatora systemowego

systemowego x1
Złącze główkowe kasowania CMOS x1
Złącze USB

Każde złącze obsługuje 2 porty USB na panelu
przednim

Back Panel
I/O

Wymiary
płyty

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Złącze Port drukarki

Złącze Port szeregowy

Klawiatura PS/2

Mysz PS/2

Port VGA

Port LAN

Port USB

Gniazdo audio

Port DVI

190 mm (S) X 244 mm (W)

Funkcje

Obsługa RAID 0 / 1 / 5 / 0+1

specjalne

Obsługa Hybrid SLI (by nVIDIA driver)

Obsluga
systemu
operacyjne

Każde złącze obsługuje 1 Port drukarki

Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista 32 / Vista 64

odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU

Гнездо AM2+ / AM3

(централь

Процессоры AMD Athlon 64 / Athlon 64

ный

FX / Althlon 64 X2 / Sempron / Phenom / на 32 и 64 бит
Поддержка Hyper Transport 3.0 и PowerNow

процессор Phenom II
)
FSB
Набор
микросхем

(Максимальный ватт: 95W)
Поддержка HyperTransport 3.0 с
пропускной способностью до 5.2 GT/s
GeForce 8200
Модуль памяти с двухканальным режимом DDR2

Слоты DDR2 DIMM x 2
Основная

Максимальная ёмкость памяти 8 ГБ

память

Каждый модуль DIMM поддерживает
256МБ/512МБ/1ГБ/2ГБ/4ГБ DDR2

IDE

SATA
Локальная
сеть

Поддержка DDR2 1066 (by AM2+ / AM3 CPU)
Не поддерживает зарегистрированные модули

Интерфейс с низким количеством выводов

Обеспечивает наиболее используемые
действующие функциональные

Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "Smart Guardian" (Интеллектуальная

возможности Super I/O.

Графика

Поддержка DDR2 533 / 667 / 800

DIMM and ECC DIMM

ITE 8718
Super I/O

Архитектура AMD 64 разрешать обработка данных

защита)

Встроенная в набор микросхем GeForce
8200

Максимальная совместно используемая видео
память составляет 512 МБ
Поддержка DX10 / HDCP / PureVideo

Встроенное устройство управления

Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133

встроенными интерфейсами устройств Поддержка режима PIO 0~4,
Встроенное последовательное

скорость передачи данных до 3 гигабит/с.

устройство управления ATA

Соответствие спецификации SATA версия 2.0.
Автоматическое согласование 10 / 100 / 1000 Мб/с

Realtek RTL 8111DL

Частичная / полная дуплексная способность

Звуковая
поддержка
жесткого

Звуковая поддержка High-Definition

ALC662

5.1канальный звуковой выход

диска
Слоты
Встроенны
й разъём

Слот PCI Express Gen2 x16

Слот PCI

Разъём НГМД

Разъём IDE

Каждый разъём поддерживает 2 накопителя на
гибких магнитных дисках
Каждый разъём поддерживает 2 встроенных
интерфейса накопителей

GF8200 M2G+
СПЕЦ
Разъём SATA

Каждый разъём поддерживает 1 устройство SATA

Разъём на лицевой панели

Поддержка устройств на лицевой панели

Входной звуковой разъём

Поддержка звуковых функций на лицевой панели

Разъём ввода для CD

Поддержка функции ввода для CD

Контактирующее приспособление

Источник питания для вентилятора центрального

вентилятора центрального

процессора (с функцией интеллектуального

процессора

Контактирующее приспособление
вентилятора системы

вентилятора)
Источник питания для вентилятора системы

Открытое контактирующее
приспособление CMOS

USB-разъём

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Разъём Порт подключения

Задняя
панель
средств
ввода-выв
ода

Размер
панели

Каждый разъём поддерживает 2 USB-порта на
лицевой панели

Каждый разъём поддерживает 1 Порт подключения

принтера

Разъём Последовательный порт

Клавиатура PS/2

Мышь PS/2

Порт VGA

Порт LAN

USB-порт

принтера

Гнездо для подключения
наушников

Порт DVI

190 мм (Ш) X 244 мм (В)

Специальн
ые
техническ

Поддержка RAID 0 / 1 / 5 / 0+1

ие

Поддержка Hybrid SLI (by nVIDIA driver)

характери
стики
Поддержк
а OS

Biostar сохраняет за собой право добавлять или
Windows XP / Vista 32 / Vista 64

удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪AM2+ / AM3‬ﻡﻘﺒﺲ‬
‫وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫‪AMD Athlon 64 / Athlon 64 FX / Sempron /‬ﻡﻌﺎﻟﺠﺎت‬

‫إﺟﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺑﻴﺔ ﺑﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺑﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬

‫اﻟﻤﺮآﺰیﺔ‬

‫‪Phenom / Phenom II / Althlon 64 X2‬‬

‫‪ PowerNow‬و ‪Hyper Transport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫)و‪: 95‬ﻗﺼ ﻮى واط(‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ‪ 5.2 GT/s‬ﺑﺘﺮدد یﺼﻞ إﻟﻰ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬

‫‪GeForce 8200‬‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫‪Super I/O‬‬

‫‪ITE 8718‬‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺡﺎﻟﺔ اﻷﺟﻬﺰة‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬

‫ﻓﺘﺤﺔ ‪DDR2 DIMM‬‬

‫ﻋﺪد‪2‬‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺟﻴﺠﺎ ﺑﺎیﺖ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻡﻴﺠﺎ ‪ 256/512‬ﺳﻌﺔ ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺑﺎیﺖ و‪ /1‬و‪ /2‬و‪ 4‬ﺟﻴﺠﺎ ﺑﺎیﺖ‬

‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬

‫‪ GeForce 8200‬ﻡﺪﻡﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬

‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬

‫‪SATA‬‬

‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬

‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬

‫ﻡﺰدوﺟﺔ اﻟﻘﻨﺎة‪DDR2‬وﺡﺪة ذاآﺮة‬
‫ﺳﻌﺎت ‪ 800 / 667 / 533‬ﻡﻴﺠﺎ ﺑﺎیﺖ‪DDR2‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﺳﻌﺎت ‪ 1066‬ﻡﻴﺠﺎ ﺑﺎیﺖ‪DDR2‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫)‪(DDR2 1066 is by AM2+ / AM3 CPU‬‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫ﻡﻴﺠﺎ ﺑﺎیﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫‪DX10 / HDCP / PureVideo‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﺟﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺛﺎﻧﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺛﺎﻧﻴﺔ‬

‫‪Realtek RTL 8111DL‬‬

‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬

‫‪ALC662‬‬

‫اﻟﺘﻌﺮیﻒ‬

‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻡﻦ‬

‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد‪2‬‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬

‫اﻟﻠﻮﺡﺔ‬

‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫‪IDE‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺟﻬﺰة‬

‫ﻡﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد‪4‬‬

‫‪SATA‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺡﺪ ﻡﻦ أﺟﻬﺰة‬

‫اﻟﻔﺘﺤﺎت‬

‫‪46‬‬

‫‪GF8200 M2G+‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﺡﺠﻢ اﻟﻠﻮﺡﺔ‬
‫ﻡﺰایﺎ ﺥﺎﺹﺔ‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫‪47‬‬

‫ﻡﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻡﻨﻔﺬ ‪CD-IN‬‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ دﺥﻞ ﺹﻮت اﻟﻘﺮص اﻟﻤﺪﻡﺞ‬

‫وﺹﻠﺔ ﻡﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬

‫ﻋﺪد ‪1‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬

‫وﺹﻠﺔ ﻡﺮوﺡﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ اﻟﻨﻈﺎم‬

‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺡﺔ ﻡﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪VGA‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد‪4‬‬

‫ﻡﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪ‪3‬‬

‫ﻡﻨﺎﻓﺬ ‪DVI‬‬

‫ﻋﺪد ‪1‬‬

‫ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬

‫‪ 190‬ﻡﻢ )ﻋﺮض( ‪ 244 X‬ﻡﻢ )ارﺗﻔﺎع(‬
‫‪RAID 0 / 1 / 5 / 0+1‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫)‪Hybrid SLI (by nVIDIA driver‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪Windows XP / Vista 32 / Vista 64‬‬

‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺑﺪون إﺥﻄﺎر‪.‬‬

Motherboard Manual

JAPANESE
仕様
Socket AM2+ / AM3
AMD Athlon 64 / Athlon 64 FX / Althlon 64
CPU

X2 / Sempron / Phenom / Phenom II プロ

AMD 64アーキテクチャでは、32ビットと64ビット計算が可
能です
ハイパートランスポート3.0とクールアンドクワイアットを

セッサ
サポートします

(最高のワット: 95W)
FSB

5.2 GT/sのバンド幅までハイパートランスポ
ート3.0をサポートします

チップセッ

GeForce 8200

ト
DDR2 DIMMスロット x 2

デュアル チャンネルモードDDR2メモリモジュール

メインメモ

最大メモリ容量8GB

DDR2 533 / 667 / 800 をサポート

リ

各DIMMは 256MB/512MB/1GB/2GB/4GB DDR2 1066 をサポート (by AM2+ / AM3 CPU)
DDR2をサポート

登録済みDIMMとECC DIMMはサポートされません
低ピンカウントインターフェイス

ITE 8718
Super I/O

もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。

グラフィッ

H/Wモニター
ITEの「スマートガーディアン」機能
最大の共有ビデオメモリは512MBです

GeForce 8200チップセットに統合

DX10 / HDCP / PureVideo のサポート

クス
IDE

環境コントロールイニシアチブ、

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

統合IDEコントローラ

PIO Mode 0~4のサポート、
最高3Gb/秒のデータ転送速度

SATA

統合シリアルATAコントローラ

LAN

Realtek RTL 8111DL

SATAバージョン2.0仕様に準拠。
10 / 100 / 1000 Mb/秒のオートネゴシエーション
半/全二重機能

HDオーディ
オのサポー

5.1チャンネルオーディオアウト

ALC662

ハイデフィニションオーディオのサポート
ト
PCI Express Gen2 x16スロット

PCIスロット

オンボード

フロッピーコネクタ

各コネクタは2つのフロッピードライブをサポートします

コネクタ

IDEコネクタ

各コネクタは2つのIDEデバイスをサポートします

スロット

GF8200 M2G+
仕様
SATAコネクタ

各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

CDインコネクタ

CDオーディオイン機能をサポートします

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ

システムファン電源装置

CMOSクリアヘッダ

USBコネクタ

各コネクタは2つのフロントパネルUSBポートをサポートし
ます

電源コネクタ(24ピン)

背面パネル
I/O

ボードサイ

電源コネクタ(4ピン)

プリンタポートコネクタ

シリアルポートコネクタ

PS/2キーボード

PS/2マウス

VGAポート

LANポート

USBポート

オーディオジャック

DVIポート

各コネクタは1つのプリンタポートをサポートします

190 mm (幅) X 244 mm (高さ)

ズ
特殊機能

RAID 0 / 1 / 5 / 0+1 のサポート
Hybrid SLI のサポート(by nVIDIA driver)

OSサポート Windows XP / Vista 32 / Vista 64

Biostarは事前のサポートなしにOSサポートを追加または削
除する権利を留保します。

2009/03/13

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2009:03:13 10:42:51+08:00
Modify Date                     : 2009:03:13 10:42:51+08:00
Page Count                      : 51
Creation Date                   : 2009:03:13 02:42:51Z
Mod Date                        : 2009:03:13 02:42:51Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 97031
Metadata Date                   : 2009:03:13 02:42:51Z
Creator                         : 97031
Title                           : Microsoft Word - N78SD-M2S.doc

EXIF Metadata provided by EXIF.tools

Biostar Gf8200 M2G Plus Owners Manual N78SD M2S

Navigation menu

Versions of this User Manual:

Views

Navigation