Bissell 1720 1 User Manual POWER STEAMER Manuals And Guides L0030088
BISSELL Power Steamer Manual L0030088 BISSELL Power Steamer Owner's Manual, BISSELL Power Steamer installation guides
User Manual: Bissell 1720-1 1720-1 BISSELL POWER STEAMER - Manuals and Guides View the owners manual for your BISSELL POWER STEAMER #17201. Home:Vacuums & Floor Care Parts:Bissell Parts:Bissell POWER STEAMER Manual
Open the PDF directly: View PDF 
.
Page Count: 10
| Download | |
| Open PDF In Browser | View PDF |
....
_k
St_es _1720
A
Portalfie
Deep
Cleaners
• Assembly
• Operation
BISsEIr
• Safety
• Storage
We're glad you purchased a BISSELLLittle GreenTM
Portable Deep Cleaner. Everything we know about floor care
went into the design and construction of this handy, high-tech
home cleaning system.
Your Little Green is well made, and we back it with a
full one-year warranty. Wealso stand behind it with a
knowledgeable, dedicated Consumer Services department, so,
should you ever have a problem, you'll receive fast. considerate
assistance.
My great-grandfather invented the floor sweeper in 1876.
Today,BISSELLis a global leader in the design, manufacture,
and service of high quality, homecare products like your
Little Green.
Thanks again, from all of us at BISSELL.
\
MarkJ. Bissell
Presidentand Chief ExecutiveOfficer
• Easy to fill and empty
• Store ready-to use with cleaning
formula
•Specialized tools for all
cleaning needs
}
\
;f_j.
((!f
_ARNING: .o on,use
this product with any tyoe of a ladder.
Do not place tile proauct ill aniace
where it still be stepped on or k_cked
while in use. Do ant place tile product
on an elevated surmce winere it may be
palled
off the surtaee
xxhile in use.
iF!XWARNING: _oo,,,use._
extension
cord with this product. The
use of an extension cord may result in a
severe electrical
shock, particularly, if
the exxension
cord does not have an
electrical
rating higher than that of the
product, if tile extension
cord does not
have u three prong
grounding
plug
and connector
and if the exxensiou cord
is. not ntug_ed.
, ,.
trot a circuit" box wtth' a
,,.round fault circuit interrupte.+
S'Mct3
precautions
such as keeping all connections off tile ground
and dr3. will not
eliminate
tile danger.
Vacuum
Flex Hose with
Grip_rigger
Umt
m
Tools
Solution Tank
_
m
PowerCord
Collection Tank
In
ThisUser'sGuidehasbeendesignedtohelpyouget
theutmostsatisfaction
fromyourUtile
GreenPortabte
D_ Cleaner.
You'llfindassembly
instmctiomforall
cleaningtasks,safetyprecautions,
pre-cleaning
tips.and
maintenanceandtroubleshooting
mstmctiom.Please
read thisGuidethoroughly
beforeusing your Little Greeu.
Pay particular attention to the parts diagram.
assembly instructions, and part names. Familiarize
yourself with the tools and how they're used.
Following the Guide will greatly enhance your ability
to get the most performance from your Little Green
for many years.
How to put it together
Your Litde Green Portable Deep Cleaner comes assembled
and ready to use. The exploded vie,,,,,drawing and part names
may come in handy if you should need to order a part.
The Solution Tank is the translucent tank at your right as you
face the Little Green. Remove the Tank by grasping the indented
handle and pulling it toward you. then tilting out.
01':'
t}ISS:.__.
lOl'lllUl:_
[_t"
'"
1_
•,lllici_
II
Open the Solution Tank bypulling up on the round cap.
AddBISSELLLittle Green formula to the formula fill line
(8-oz,) on Solution Tank. NOTE:YourLittle Green is shipped
with an
8 oz. starter bottle of formula.
pltlt"
Fill the Solution Tank with hot (NOTboiling) tap w,ater to the
water fill line.
'_tit;:"
Replace the cap before placing tile Solution Tank back into
the unit.
Replace the Solution Tank by placing it bottom first into the
cavil', then tilting it pressing gently at top until it snaps closed.
The file
Collection
Tank isIt the
translucent
your
as you
face
Little Green.
opens
and closestank
justatlike
ttleleft
Solution
Tank. Empty the Collection Tmlk after each use. when dirt3.
water reaches the indicated maximum fill line. or as instructed
in this User's Guide.
Store
the Onboard
the back ofUnit.
the Little
Green.inCleaning
tools Hose
attachStorage
to the on
Gfip_rigger
NOTE: Unv,xap Flex Hosecompletely before operating unit,
LIV.:':" (Jret:::
\O1:7
Clitltaiz_
{}iI
Ill: p,
'.
lIlk_nl[llIL_
ienlon
l:.{tIlli!_
iw
lilts
{UI{I '*lti{'l \\;lr'_dllP!;
._lIOt Ci_UII.'I_
or"
iLnIlllall{£{£
(AIt?IIliGLI
._llllUi{i
IdIIdallPl
Ci¢2anil!U
n{ll
11L. iiNt2u'..
"lite_c
!lrllttttcts ma_. re:tot vdt|l the
olastic materiais
used in
crackilI_
cieatlc;
causing
or pirtillg.
&
Safety.instructions ..........
2
Product view ..............
3
Dependingon whichLittleGreenmodelyoupurchased,your
deep cleaner is equipped with:
• 4" wide Upholstery/Carpet Tool _.
• Glass-Cleaning
• 6" Upholstery/Carpet_
_"_Tool
How to put it together ......
4-5
Toolfor streak-
_
for larger areas
free(_,,,/"_cleaning
• Spraying Crevice Tool "_,_
for hard to reach areas
,_/_
NOTE:Youmay pureh_e thee tools by calling B SSELLConsumer Servio_
at the telephonenumber on Page 10.
Index ....................
5
How to begin ..............
5
How to deep clean
carpet or upholstery .........
6
How to clean glass surfaces ...7
The
Cord,Cord
with Storage
a three-prong
grounded
plug,
stores
in the
Onboard
at the bottom
of the
Little
Green.
Putting it away ............
7
Troubleshooting
8
...........
NOTE: Unwrap PowerCord completely before operating unit.
Parts .....................
Assembly
for wet cleaning
is now complete.
Warranv
................
Consumer services .........
How to begin...
1. In the case of spills, remove as much surface material as
possible before using your Little Green.
1. Check manufacturer's tag before cleaning. "W" or "WS" on
the tag means you can use your Little Green. If tag is coded
with an "S" (with diagonal strike-through), or says "Dry
Clean Only," do not proceed.
2. If manufacturer's tag is missing or not coded, check with
your furniture dealer.
3. If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.
9
10
10
Gettingready
1. Remove Vacuum Flex Hose completely from Onboard
Hose Storage.
2. Attach 4" Tool, 6" Tool* or Crevice Tool* to Grip Trigger
Unit by pressing Tool onto Grip/Trigger Unit firmly;
until button snaps into hole. Make certain Tool is
securely attached.
3. Unwrap Power Cord completely from Onboard Cord Storage
and plug into 120 Volt. 60 Hz grounded outlet as described
in Important Safety, Instructions, page 2.
4. If cleaner starts when first plugged in, switch cleaner off
until ready for use.
When you're done
5. Move Power switch to ON position.
6. Press and hold Spray Trigger on Grip/Trigger unit. Spray
will start in a few seconds.
7. Raise Upholstery/Carpet Tool slightly to check for spray. If
spray does not start, press firmly on the front of the Solution
Tank while depressing Spray Trigger.
*Optional on some LittleGreen models. Toorder optional
parts not originally included in )x_urLittleGreen model, call
BISSELL Consumer
1-8OO-237-7691
Services
Monday - Friday
8 a.m. --
7 p.m. EST
Saturday
9 a.m. -- 1 p.m. EST
Pre-treating
1. Pre-treat stained or highly soiled areas: Hold
Upholstery/Carpet Tool or Crevice Tool 4"- 6" above carpet
or upholstery, and pull trigger to spray clezming solution.
2. Wait 3-5 minutes before cleaning.
Deep cleaning
1. Place Upholstery/Carpet Tool directly on soiled surface at
arms length. Apply downward pressure on Upholstery/Carpet
Tool and pull toward you. while pulling trigger to spray
cleaning solution.
2. Repeat, keeping Upholstery/Carpet Tool firmly against
surface. Continue until no more dirt can be removed.
Do not overwet.
3. Release spray trigger. Vacuum area until no more
cleaning
solution
can be removed.
[see WHEN
YOU'REnONE, page 6].
4. If Upholstery/Carpet Tool stops spraying, turn off Power
Switch and check cleaning solution level. Refill if needed.
Never mn pump dry.
NOTE:Before turning offLittle Green. lift Upholster,'/
CaE_etTool and point upwards. This allows ans'
'
water still in the Vacuum FlexHoseto flowinto
the Collection Tank.
1. Turn Power Switch to OFF position.
2. Unplug Power Cord from outlet.
3. Remove and rinse Solution Tank, then
replace.
NOTE: Ifa significant amount of Little Greenformula/
water remains, you may leave it in the Solution
Tank for your riextcleaning task.
4. Remove Collection Tank. Be careful not to
spill dirty,water.
5. Carefully carry. Collection Tank to a toilet or
sink to emp_,.
6. Fill Collection Tank with clean water. Rinse
thoroughly and discard wateE
7. Replace Collection Tank.
8. Disconnect Upholstery/Carpet Tool from
Grip/Trigger unit by pushing down on
button lock and pulling straight off.
(Do NOT twist tools to remove them).
9. Remove brush from Upholstery/Carpet Tool
and clean brash under clean running water.
10. Remove clear plastic view window from
Upholstery/Carpet Tool by pushing on tab
opening while pulling out bottom window
lip. Rinse under clean running wate_
11. Check Spray Nozzle for accumulated dirt
or debris. If necessary,, clean with soft
bristle brush.
12. See PUTTING IT AWAY
on page 7.
1. Attach
the Glass-Cleaning
using the "button-in-hole"
2. Remove Solution Tank.
Tool to the Grip/Trigger unit
method.
3. Fill Solution Tank with your choice of popular liquid
glass-cleaning solution (Windex ®, Glass Plus ®. etc.).
4. Replace Solution Tank.
5. Unwrap Power Cord completely from Cord Retainer and
plug into 120 Volt, 60 Hz grounded outlet as described in
Important Safety,Instructions. page 2.
6. If cleaner starts when first plugged in. switch cleaner off
until ready for use.
7. Move Power Switch to ON position.
8. Press and hold Spray Trigger on Grip/Trigger Unit. Spray
will start in a few seconds.
WARNINC:
not use "immcmade
gl_._>
eicaning solutions
ill your
Little t,recn. 'lhese
could
aama_e the Little (,reen and
the Glass cleanin_
Tool.
Also. €io not use Little
Green
_llen
tormullt
O11 v, indow._.
cieanill_,
\;indov,
s
alter cicanin_ uoiluistc _ or
carpel
tnnroughi)
rinse
bototion
Little
"ianii.
(,,rtzell
t,rioitrtg,.2er
_,;" pail
COl|le_
"'flush"
spraying
t tilt o_ er sin_..
uli[ll
on(
"litcn
t_\
$21_L.'_
oi
Oeanel"
,%Dr:t'_ [%ozzi,.
9. Raise Glass-CleaningTool slightly to check for spray.
t . WAR
N[NG:
Keep lace m_av ironl SDril\.
Faihlrc
to oo so inu_ resnlt
in personal inju_.
1. Theheadof theGlass-Cleaning
Toolrotates.Begin
cleaning with sponge edge of tool rotated in the same
direction as the spray tip.
2. Move Power Switch to ON position.
3. Hold Glass-Cleaning Tool approximately 12'" from glass
mirror, table top, window or other surface to be cleaned,
and pull trigger to spray glass-cleaning solution.
4. Use sponge edge to scrub stubborn spots and to spread
solution evenly over the glass surface.
Putting it away
1. Afterdeep cleaning of carpet or upholstery, or
cleaning glass, follow instructions in WHEN
YOU'RE DONE.page 6.
2. Wipe all surfaces with a soft cloth.
5. Rotate head to place squeegee edge at a 45 ° angle for
best results.
3. Wrap Power Cord around Onboard Cord
Storage at the bottom of Little Green.
6. Repeat this motion over entire surface, until the glass
surface is streak-free.
4. Wrap Vacuum Flex Hose around Onboard
Hose Storage and secure with Hose Clip.
7. Check the Collection Tank. Empty. the tank if it is full.
[see WHEN YOU'RE nONE, page 6].
5. Store Cleaner in a protected, dry, area. at room
temperature (40 ° to ll0°F).
8. If Glass-Cleaning Tool stops spraying, turn off Power
Switch and check solution level.
9. Refill if needed. Never run pump dr).
10. See WHEN YOU'RE DONE (page 6) and PUTI'ING IT AWAY
(page 7).
NOTE:Beforeturning off LittleGreen. lift Glass-Cleaning Tool and
point upwards. This allo_ any water still in the X'acuum FlexHose to
flow into the CollectionTank.
,,_Tab
opening
Push tab
The 4" and 6" cleaning heads are two piece
attachments. The attachments clear front
window snaps off for easy maintenance and
clean-ups.
WARNING:
reduce
electric
the risk
of tire.
shock
or iniur_,.
unplug
outlet
appliance
before
Cleaner
from
servicing.
won't
run.
Possible Causes
Remedies
Power Unit not plugged in
Checkelectrical plug
Blownfuse/tripped breaker
Replace household fuse or
Resetbreaker
Call BISSELLConsumer Services
Reduced spray or no spray.
Possible Causes
Remedies
Spray Nozzleclogged
Clean Spray Nozzle
SolutionTankempty
Cheek/RefillTank
Solution Tank outlet clogged
Clean outlet at bottom of Solution Tank
Pump needs priming
Push firmly on Solution Tank front
while depressing Spray Trigger
Vacuum
won't pick
up cleaning
solution.
Possible Causes
Remedies
Poor Upholstery/Carpet Tool
position
RepositionUpholstery/CarpetToolon
surface, followrecommended cleaning
procedures.
Poor Glass-CleaningTool
position
Reposition Tool to 45 ° angle
Collection Tank is full
Empty Collection Tank
Upholstery/CarpetTool Brush
Replacewith new Brush
wom
Excesssolution in Vacuum Flex LiftTool and point upwards to allow
Hose
water in Hoseto flowinto the
CollectionTank
Excessive
Foam in the Collection
Tank.
Possible Causes
Remedies
Residueleft in carpet or fabric
from prior cleaning
Flush carpet by using clear water in
Solution Tank
CheekTank often and empty
as necessary
Incorrect cleaning formula
UseBISSELLLittleGreen formula only
Item Part No.
Part Name
1
603-0983
2
6o3-o961
4" Upholstery/CarpetToolw/Brush
4" Window
3
4
603-0984
4" RemovableBrush
5
603-0962
6
6O3-O986 6" RemovableBrush
7
6034)987
SprayingCreviceTool
8
603-0988
GlassCleaningTool
9
6O3-O985 6""Upholster)'/CalT,
et Toolw/Brush
6" Window
For Model 1720-1/4
9
603-1201
CollectionTank-White
10
603-1200
,SolutionTank-White
For Model 1720-2
11
603-1203
CollectionTank-Tinted
12
603-1202
SolutionTank:tinted
For Model 1720-3/Q
13
603-1203
CollectionTank-Tinted
14
603-1204
SolutionTank-Tinted
NOTE:
Toorderreplacement
parts,ortoorderpare notoriginally
includedin yourLittleGreenmodel,call
BISSELL Consumer
Services
1-800-237-7691
Monday - Friday 8 a.m. --
7 p.m. EST
9
About your warranty
This warranty givesyou specificlegal rights, and you may
also have other rights which may vary,from state to state.
If you need additional instruction regarding this warrant'
or have questions regarding what it may cover,call BISSELL
Consumer Services.
OneYear Warranty.
BISSELL Inc.. upon receipt of the product, will repair or
replace, free of charge, any part which is defective or
malfunctioning within one year of the purchase date,
provided that it is used for personal and not commercial
or rental service. If the deep cleaner cannot be repaired,
BISSELL Inc. will replace or refund the full price,
at your option.
How to return your BISSELLproduct for
service
1. Call BISSELL Consumer Services (1-800-237-7691)
for referral to a Bissell Service Center, or for
return
authorization.
2. Return unit to your dealer with a proof
of purchase.
(Check return policy of your dealer.)
NOTE:Please keep your original sales receipt.
It is your warranty.
Forinformation about repairs or replacement parts, or questions
about your warranty, call:
BISSELLConsumer Services
1-800-237-7691
Monday- Friday 8 a.m. -- 7 p.m. EST
Saturday
9 a.m. -- 1p.m. EST
Orwri_:
BISSELLINC
PO Box3606
Grand Rapids MI 49501
ATTN: Consumer Services
WhencontactingBISSELL.
ixavemodelnumberof unit available.
Pleaserecordyour ModelNumber
Ple_e recordyour PurchaseDate:
10
!ife's messy.
Cleanitup:
01997 BISSELL
lnc
GrandRapi(KMichigan
Allrightsrest.
Printedin China
P_ Number603-_40
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 10 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Apr 02 12:35:19 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools