Bissell Purepro 32N3 Users Manual

32N3 to the manual 2cd6bfd7-0c3d-481a-9011-afe2ab5b92d0

2015-01-21

: Bissell Bissell-Purepro-32N3-Users-Manual-238541 bissell-purepro-32n3-users-manual-238541 bissell pdf

Open the PDF directly: View PDF .
Page Count: 12

USER'S GUIDE

32N3 SERIES 220-240 V

2Thank You

Safety Instructions

Product View

Assembly

Operations

Maintenance and Care

Troubleshooting

Replacement Parts

6-7

8-9

Warranty

www.bissell.com

Thanks for buying a BISSELL PurePro™ Compact Vacuum

We’re glad you purchased a BISSELL PurePro vacuum. Everything

we know about floor care went into the design and construction of

this complete, high-tech home cleaning system.

Your BISSELL canister vacuum is well made, and we back it with

a limited one year warranty. We also stand behind it with a

knowledgeable, dedicated Consumer Services department, so,

should you ever have a problem, you’ll receive fast, considerate

assistance.

My great-grandfather invented the floor sweeper in 1876. Today,

BISSELL is a global leader in the design, manufacture, and

service of high quality homecare products like your BISSELL

canister vacuum.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President & CEO

When using an electrical

appliance,

basic precautions should be observed,

including the following:

READ ALL INSTRUCTIONS

BEFORE USING YOUR BISSELL

CANISTER VACUUM.

WARNING -

To reduce the risk of

fire, electric shock, or

injury:

■ Use indoors only.

■ For dry pick up only.

■ Do not leave machine when it is plugged in.

■ Do not use with damaged cord or plug.

■ If appliance is not working as it should, has

been dropped, damaged, left outdoors, or

dropped into water, return it to a service

agent.

■ Do not handle unit with wet hands.

■ Do not pull or carry by cord, use cord as

a handle, close door on cord, pull cord

around sharp corners or edges, run

appliance over cord, or expose cord to

heated surfaces.

■ Do not unplug by pulling on cord.

Unplug by grasping plug.

■ Do not run appliance over cord.

■ Do not handle plug or appliance with wet

hands.

■ Do not expose hair, loose clothing,

fingers or body parts to openings or

moving parts.

■ Do not pick up hot or burning objects

such as cigarettes, matches, or hot ashes.

■ Do not pick up flammable or combustible

materials (lighter fluid, petrol, kerosene, etc.)

or use in the presence of explosive liquids or

vapour.

■ Do not use appliance in an enclosed space

filled with vapours given off by oil base

paint, paint thinner, some moth proofing

substances, flammable dust, or other

explosive or toxic vapours.

■ Not intended for use by persons (includ-

ing children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

■ Young children should be supervised to

ensure that they do not play with the

appliance.

■ Remove plug from electrical outlet before

cleaning or maintaining the appliance.

■ If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent in order to avoid a hazard.

■ Do not pick up toxic material (chlorine

bleach, ammonia, drain cleaner, petrol, etc.).

■ Do not use for any purpose other than

described in this User’s Guide.

■ Use only manufacturer’s recommended

attachments.

■ Do not use with any opening blocked;

keep free of dust, lint, hair, and anything

that may reduce air flow.

■ Keep appliance on a level surface.

■ Turn off all controls before unplugging.

■ Be extra careful when cleaning stairs.

■ This appliance is provided with double

insulation. Use only identical replacement

parts.

■ Do not use without the dust bag and

filters in place.

■ Pay close attention when working

around children.

SAVE THESE

INSTRUCTIONS

FOR FUTURE USE.

IMPORTANT FOR

OPERATION ON A 220-240 VOLT A.C.

50/60 Hz POWER SUPPLY ONLY.

THIS MODEL IS FOR HOUSEHOLD USE

ONLY.

www.bissell.com

IMPORTANT SAFETY INSTRUCTIONS

www.bissell.com

Product view

CAUTION:

Do not plug in your vacuum

until you are familiar with all

instructions and operating

procedures.

Flex Hose

Telescoping Extension

Wand

Handle

Crevice Tool Dusting BrushUpholstery Tool

Multi-Surface

Floor Nozzle

Automatic Cord

Rewind Button

Brush Switch

Power Button

Bag Change

Indicator

Post-Motor Filter

Carry Handle

Variable

Suction Power

Control

www.bissell.com

Assembly

1. Connect swivel hose by firmly inserting it

into the suction opening on the canister.

The hose will click into place when

correctly inserted.

2. Connect telescoping extension wand to

the handle end of the flex hose. Twist

slightly to tighten.

3. Connect floor nozzle to the end of the

telescoping extension wand. Twist

slightly to tighten.

4. To extend telescoping wand, press down

on the black button, in the direction of

the arrows, with one hand and firmly

grasp and pull out extending portion

of the wand to desired length with the

opposite hand.

5. Once assembled, you can store your

vacuum in one of two positions:

A. Storing in the in-use position:

To store with the floor nozzle

attached, insert the storage clip

(located on the back of the floor

nozzle) into the storage slot on the

rear of the vacuum.

B. Storing in the upright position:

To store with the floor nozzle

attached, stand the vacuum in the

upright position and insert the stor-

age clip (located on the back of the

floor nozzle) into the storage slot on

the bottom of the vacuum.

WARNING:

Plastic film can be danger-

ous. To avoid danger of suf-

focation, keep away from

babies and children.

Storing in the in-use position

Storing in the upright position

Brush Up

www.bissell.com

0perations

Power cord

The power cord is located at the rear

of the vacuum. Gently pull out the

power cord, watching for the yellow

line. Stop pulling the power cord once

the yellow line is visible. There is also

a red line, which indicates the end of

the usable cord. Do not pull the power

cord out beyond the red line.

Automatic cord rewind

Your vacuum is equipped with an

automatic cord rewind. When

cleaning is finished, press the power

button OFF and grasp the plug to

disconnect from the electrical outlet.

Hold the plug and press the automatic

cord rewind button to rewind the cord

automatically.

Power button

Turn the power on or off by pressing

lightly downward on the power button

( ).

Special tools

Your BISSELL PurePro is not only a

powerful carpet and rug vacuum

cleaner, it’s also a versatile bare floor

vacuum cleaner and above floor vacu-

um cleaner when you select one of the

special tools.

Floor nozzle:

Use to vacuum carpets, rugs and bare

floors. Swivel head turns to get into tight

spaces and fits under cabinets.

1. To vacuum carpets and rugs, push the

brush switch to the carpet position .

This will pull the brushes up into the floor

nozzle.

2. To vacuum bare floors, push the brush

switch to the bare floor position .

This will extend the brushes down from the

floor nozzle.

Upholstery tool:

Use the upholstery tool to clean curtains,

draperies, cushions and fabrics.

NOTE: Use the air flow regulator

to reduce air flow as needed when

using the upholstery tool.

CAUTION:

Before using your vacuum, make

sure that the dust bag and all filters

(pre-motor and post-motor) are in

place. Do not operate your vacuum

without the dust bag and filters.

Power Button

CAUTION:

Be careful to avoid injury as cord

retracts very quickly.

Automatic Cord

Rewind Button

Brush Down

www.bissell.com

0perations

Special tools continued

Crevice tool:

Use the crevice tool in tight, narrow

spaces.

Dusting brush:

Attach dusting brush to the tip of the

crevice tool to dust furniture, blinds, books,

lamps, shelves and baseboards.

Variable suction power control

The variable suction power control

is located on the top of the vacuum.

Twist the dial control toward MAX

for maximum suction. Twist the dial

control toward MIN to minimize suc-

tion for lightly soiled areas or delicate

fabrics.

High filtration dust bag

The BISSELL PurePro features a non-

woven, high filtration dust bag that

captures more fine dust than traditional

paper dust bags, giving off less dust

emissions. It also holds more fine dust

particles, giving you longer lasting suc-

tion power.

Bag change indicator

The bag change indicator is located

right below where the hose inserts

into the vacuum. If the colour scale

bag change indicator fills the window

while you are vacuuming, the dust bag

needs to be replaced. The dust bag

may appear to be full or only partially

full depending upon the type of debris

picked up. Fine particles can block the

airflow in the dust bag and reduce

suction before the dust bag is full. If

the colour scale bag change indica-

tor remains full, even after changing

the dust bag, turn the vacuum off and

check for a clog in the hose or tools.

Note: The indicator may fill the win-

dow when using the tools due to the

restricted airflow. This does not nec-

essarily mean that the dust bag is

full. If the indicator does not turn off

once the tool is removed, check for a

clog in the hose/tools or replace the

dust bag.

Bag Change

Indicator

www.bissell.com

Maintenance and care

Dust bag replacement

1. Unplug the vacuum from electrical outlet.

2. Open the dust bag compartment by lifting

up on the latch on the door on the front of

the vacuum, until the door locks into place.

3. Close the filter bag by pulling the card-

board strap. This serves to cleanly seal the

full dust bag. Lift out the dust bag holder

and dust bag by pulling vertically on the

convenient handle, located on top of the

dust bag holder.

4. Release the dust bag from the holder by

grasping the cardboard strap, which was

used to seal the full dust bag, and pulling

to the right, removing the dust bag out of

the holder. Discard the used dust bag.

5. Slide the new dust bag into the holder by

inserting the dust bag into the tabs located

at the bottom of the holder. Make sure the

dust bag has slid completely into place for

proper use.

6. Place holder and new dust bag back into

the dust bag compartment, making sure the

entire bag is tucked in below the seal gasket.

7. Close dust bag compartment door and

press down gently until it locks into place.

NOTE: The dust bag compartment

door will not close without the dust

bag in place.

The HEPA media pre-motor filter

protects the motor from dirt and

dust particles and assists in the fil-

tration process to return clean air to

the room.

1. Unplug the vacuum from electrical outlet.

2. Open the dust bag compartment by lifting

up on the latch on the door at the front of

the vacuum until the door locks into place.

Lift out the dust bag holder and dust bag.

3. Remove the filter frame from the filter

holder by grasping the lip of the frame

and pulling up.

Replacing the HEPA media pre-motor filter

NOTICE:

This product is intended for house-

hold use only and not for commer-

cial or industrial use. Vacuuming

of dust from products like plaster,

concrete or ashes will damage the

motor and void the warranty.

HEPA media Pre-Motor Filter

WARNING:

To reduce the risk of electric shock,

turn power switch OFF and

disconnect plug from electrical

outlet before performing mainte-

nance or troubleshooting checks.

www.bissell.com

Maintenance and care

4. Replace the filter with a new HEPA media

filter by having the tab, connected to the

filter frame, on top and inserting the filter

frame straight down into the filter holder.

NOTE: The filter frame should be

placed so the protective frame is vis-

ible.

5. Place dust bag holder and dust bag into

the dust bag compartment, making sure the

entire bag is tucked in below the seal

gasket.

6. Close dust bag compartment door and

press down gently until it locks into place.

The post-motor micro filter assists in

the filtration process to return clean

air to the room.

1. Unplug the vacuum from electrical outlet.

2. Open dust bag compartment by lifting up

on the latch on the door at the front of the

vacuum, until the door locks into place.

3. Remove the post-motor micro filter from

indentation, which is located towards the

back of the dust bag compartment near

the hinges of the door.

4. If there is no visible wear and tear and/or

imbedded dirt, it is acceptable to clean the

filter by hand washing it with warm water.

A mild detergent can be used if desired.

Allow the filter to air dry thoroughly before

replacing.

NOTE: It is recommended to always

replace the post-motor micro filter

after every fifth replacement of the

dust bag.

5. Replace the post-motor micro filter back

into indentation, with the white side facing

down.

6. Close the dust bag compartment door and

press down gently until it locks into place.

Replacing the HEPA media pre-motor filter continued

Replacing the post-motor micro filter

Post-Motor

Micro Filter

Tip:

Change HEPA media filter every

6 months. Otherwise, efficiency

and air permeability will be

reduced.

WARNING:

Do not operate cleaner with

damp or wet filters or without

all filters in place.

www.bissell.com

Troubleshooting

Vacuum cleaner won’t run

Possible causes Remedies

1. Vacuum cleaner is not plugged in 1. Check electrical plug

2. Power button is not pressed down 2. Press power button down

Vacuum cleaner won’t pick up or low suction

Possible causes Remedies

1. Tools, flex hose and/or telescoping 1. Remove each part and check for

extension wand are blocked blockages

2. Filters are dirty 2. Check and clean or replace pre-motor

and post-motor filters

3. Dust bag is full 3. Replace with new dust bag

4. Swivel hose not securely attached to 4. Make sure swivel hose is locked into

suction opening suction opening

5. Crack or hole in flex hose 5. Check hose and replace if needed

6. Variable suction power control is set to 6. Change to maximum setting

minimum setting

Visible dust escaping from vacuum

Possible causes Remedies

1. Dust bag is full 1. Replace with new dust bag

2. Filters missing or installed incorrectly 2. Check pre-motor and post-motor filters for

correct installation

3. Filters are dirty 3. Check and clean or replace pre-motor

and post-motor filters

4. Flex hose is blocked 4. Remove hose and check for

blockages

5. Swivel hose not securely attached to 5. Make sure swivel hose is locked into

suction opening suction opening

6. Crack or hole in flex hose 6. Check hose and replace if needed

Other maintenance or service not included in the manual should be per-

formed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

WARNING:

To reduce the risk of electric shock, turn

power OFF and disconnect plug from

electrical outlet before performing

maintenance or troubleshooting.

www.bissell.com

Replacement parts - BISSELL vacuum

Item Part No. Part Name

1 203-7553 Floor Nozzle

2 203-7554 Flexible Hose with Handle

3 203-7555 Telescoping Extension Wand

4 203-7556 Upholstery Brush

5 203-7557 Crevice Tool

6 203-7558 Dusting Bursh

3 4

www.bissell.com

This warranty gives you specific legal rights, and you may also have other rights which may

vary from country to country. If you need additional instruction regarding this warranty or have

questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail,

telephone, regular mail as described below, or contact your local in country distributor.

Limited One Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc. will

repair or replace (with new or remanufactured components or products), at BISSELL’s option,

free of charge from the date of purchase by the original purchaser, for one year any defective

or malfunctioning part due to manufacturer defect.

See "BISSELL Consumer Services" information below.

This warranty applies to product used for personal, and not commercial or rental service. This

warranty does not apply to fans or routine maintenance components such as filters, belts, or

brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any

other use not in accordance with the User's Guide is not covered.

BISSELL Consumer Service:

If your BISSELL product should require service of if you need information about repairs,

authorized service centers in your area, replacement parts or your warranty, please contact

BISSELL Consumer Services, as indicated below, or contact your local in country distributor.

BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT

EXCEED THE PURCHASE PRICE OF THE PRODUCT.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE

LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES

EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY

ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE

AS DESCRIBED ABOVE.

For UK inquiries:

Monday - Thursday 9 am — 5 pm

Friday 9 am — 4 pm

BISSELL Homecare (Overseas) Inc.

The Boat Yard

105 Straight Road

Old Windsor

Berkshire, SL4 2SE

United Kingdom

Telephone: 0844-888-6644

For Australian inquiries:

Monday - Friday 9 am — 5 pm

BISSELL AUSTRALIA PTY LIMITED

42 Rocco Drive

Scoresby 3179

Victoria

Australia

Telephone: 1-800-811-183

For New Zealand inquiries:

Monday - Friday 9 am — 5 pm

Parex Industries Ltd.

5 Tolich Place

Henderson 0610

Auckland

New Zealand

Telephone: 0800-247-735

For all other inquiries:

Monday - Friday 8 am — 4 pm

BISSELL Homecare, Inc.

PO Box 1888

Grand Rapids, Michigan 49501 USA

Telephone: 01-616-453-4451

Fax: 01-616-453-1383

Grand Rapids, Michigan

Part Number 110-4271

Rev 7/10

Visit our website at:

www.bissell.com

Warranty - BISSELL PurePro™ vacuum

Bissell Purepro 32N3 Users Manual

32N3 to the manual 2cd6bfd7-0c3d-481a-9011-afe2ab5b92d0

Navigation menu

Versions of this User Manual:

Views

Navigation