Bissell Spotbot 1200 7887 Users Manual

2014-12-12

: Bissell Bissell-Spotbot-1200-7887-Users-Manual-119068 bissell-spotbot-1200-7887-users-manual-119068 bissell pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

3POT"OT

USER’S GUIDE
1200/7887

Safety Instructions

4-5 Product View

6-7 Special features

7-10 Operation

11 Maintenance and Care

12-13 Troubleshooting

14 Consumer Services

15 Replacement Parts
15 Additional Accessories

16 Warranty

ug120-4070_1200_408.indd 1

10/14/08 1:07:38 PM

Thank you for buying a BISSELL SpotBot
Everything we know about floor care went into the design and construction
of this complete, high-tech home cleaning system.
We trust that it will bring you many years of satisfaction. It is backed with a
limited one-year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a
question, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your SpotBot.
Thanks again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

www.bissell.com

ug120-4070_1200_408.indd 2

800.237.7691

10/14/08 1:07:38 PM

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your SpotBot™

WARNING: To reduce the risk
of fire, electric shock, or injury:

■ Use indoors only.
■ Use only BISSELL cleaning products intended for
use in this appliance.

■ Do not use for any purpose other than described
■
■
■
■
■
■
■
■
■
■
■

■

■
■
■
■

■
■

in this User’s Guide.
Use only manufacturer’s recommended attachments.
Do not handle SpotBot plug or appliance with
wet hands.
Do not put any object into appliance openings or use
with blocked openings. Keep free of dust, lint, hair,
and anything that may reduce air flow.
Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts.
Keep appliance on a level surface.
Be extra careful when cleaning stairs.
Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
Do not pick up hot or burning objects, such as
cigarettes matches or hot ashes.
Do not pick up flammable or combustible materials (lighter
fluid, gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapor.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
Do not use appliance in an enclosed space filled
with vapors given off by oil based thinner, some
moth proofing substances, flammable dust, or
other explosive or toxic vapors.
Do not pull or carry by cord, use cord as a handle,
close door on cord, pull cord around sharp corners
or edges, run appliance over cord, or expose cord
to heated surfaces.
Do not use with damaged cord or plug.
Turn off all controls before unplugging.
Unplug from outlet when not in use and before
conducting maintenance and troubleshooting.
Do not use SpotBot if it is not working as it
should, has been dropped, damaged, left outdoors
or dropped into water. Have it repaired at an
Authorized Service Center.
Unplug by grasping the plug, not the cord. Do not
unplug by pulling on cord.
Always connect to a properly grounded outlet; see
grounding instructions.

www.bissell.com

ug120-4070_1200_408.indd 3

■ Do not use without tanks in place.
■ Do not use a flammable or combustible liquid to
clean a floor.

■ Do not modify the 3-prong grounded plug.
WARNING: The Power Cord on this product contains
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING.

SAVE THESE
INSTRUCTIONS
GROUNDING
INSTRUCTIONS

This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk of
electrical shock. The cord for this appliance has an
equipment-grounding conductor and a grounding
plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
Grounded
Outlets

Grounding Pin

WARNING:

Improper
connection of the equipment-grounding
conductor can result in a risk of electrical
shock. Check with a qualified electrician or
service person if you aren’t sure if the
outlet is properly grounded. DO NOT
MODIFY THE PLUG. If it will not fit the
outlet, have a proper outlet installed by
a qualified electrician. This appliance is
designed for use on a nominal 120-volt
circuit, and has a grounding attachment
plug that looks like the plug in the drawing
above. Make certain that the appliance is
connected to an outlet having the same
configuration as the plug. No plug adapter
should be used with this appliance.
This model is for household use only.
800.237.7691

10/14/08 1:07:39 PM

Product view

Clean/Solution Tank
Dirty/Collection Tank

Flex Hose Clip

Spray Trigger
Vacuum Flex Hose
Release Button

Optional Accessories:
These items are available for purchase with your model. To order replacement parts, additional
tools or formulas, please refer to page 15.

TurboBrush

www.bissell.com

ug120-4070_1200_408.indd 4

Storage Tray

64 oz.
Little Green®
Formula

32 oz.
Pet & Odor &
Stain Removal™
Formula

32 oz.
Oxy GEN2®

800.237.7691

10/14/08 1:07:40 PM

Product view

Vacuum
Suction Nozzles
Hands Free
Cleaning Brush
Spray Tip

Cord Wrap

Power Cord
Vacuum Flex Hose

Tough Stain
™
Brush Storage

Hands Free
Cleaning Window

Keep plenty of genuine
BISSELL Advanced Cleaning
Formulas on hand so you
can clean whenever it fits
your schedule. Always
use genuine BISSELL deep
cleaning formulas. NonBISSELL cleaning solutions
may harm the machine and
void the warranty.
www.bissell.com

ug120-4070_1200_408.indd 5

800.237.7691

10/14/08 1:07:41 PM

Special features
Front view
Clean/solution tank

Is located to the right of the unit when you
are facing the unit.
Automatic Smart System™ control paneI

Located in the center of the unit and is where
you will begin selection of the smart cleaning
cycle you would like to use (detailed
instructions on page 9).
Dirty/collection tank

Looking at the front of the unit, the dirty/
collection tank is on the left side.
Vacuum flex hose

Wraps around the center of the unit. This
serves as the travel path for dirty water and
formula that is suctioned up into the dirty/
collection tank.
Spray trigger

When cleaning in the manual mode, press
the spray trigger to spray water and
formula onto the area to be cleaned.

Underside view
Handsfree cleaning brushes

Provides cleaning action when using the surface
stain or set-in handsfree cleaning cycles.
Spray tip

Water and solution are dispensed here when
cleaning in the handsfree mode.
Vacuum suction nozzles

Provides suction path when using the
handsfree cleaning cycles.

Back view
Handsfree cleaning brushes

Provides an area to see the handsfree
cleaning action.
Flex hose clip

Is attached to the unit and is a guide for the
vacuum flex hose.

www.bissell.com

ug120-4070_1200_408.indd 6

800.237.7691

10/14/08 1:07:41 PM

Special features
Back view continued
Tough Stain Brush™ Storage
The Tough Stain Brush is conveniently stored

on board.

Power cord
Has a three-prong plug and stores on the back of

the unit around the oval cord wrap.
NOTE: Unwrap the power cord completely
before operating the unit.

Cord wrap
Serves as a guide for the power cord for

storage. The cord wrap can be gently pushed
in during use.

Operation
Getting ready
1. To fill the clean tank:

A. Remove the clean tank by lifting it straight
up and then away from the unit.
B. Unscrew the cap at the bottom of the clean tank.
There are 2 ways you can fill and use the tank:

2. For common stains such as dirt, grime, pet,
or oily stains, use the fill lines on the left
side of the tank and fill with Little Green
formula (trial sizes included) and water.

3. For dye based stains such as coffee, fruit

juices, cola and red wine, use the fill lines on
the right hand side of the unit and fill with
Little Green and Oxy GEN2 formulas (trial
sizes included) and water.

How to begin
Using the Automatic Smart System™
Your new SpotBot features an Automatic Smart
System that takes the guesswork out of spot and
stain cleaning. With the touch of a button, you
can select the cleaning cycle to use your
preferred method of cleaning.

www.bissell.com

ug120-4070_1200_408.indd 7

Tip:
Before spot cleaning with
the SpotBot's Handsfree
feature, dry vacuum the
area first.

800.237.7691

10/14/08 1:07:41 PM

Operation
How to begin continued
1. Surface Stain Cycle This cycle has been

designed for stains that are on the surface of
your carpeting and have not had time to
penetrate deep in to your carpet fibers. This
cycle will run for approximately 3 minutes.

2. Set-In Stain Cycle Use on stains that have

had a period of time to set-in and penetrate
deep into your carpet fibers. These are typically
the most difficult stain types to remove. This
cycle runs for approximately 6 minutes.

3. Manual / Hose By selecting this option you can
clean spots and stains manually on surfaces
such as upholstery, car interiors, stairs or
anyplace you have a need to clean manually

4. Pause/Resume Is used to check the

status of a cleaning cycle (Surface Stain or
Set-In). If you hit the Pause button once, it
pauses the cleaning cycle it is currently in.
By pressing it one more time to Resume,
you will pick up in the cleaning cycle
where you left off.

Tip:
Some spots and spills
require that you pick up the
chunky debris with a rag
or towel before you begin
cleaning in the Handsfree or
Manual cycles.

5. Stop By depressing the Stop button, you

will stop your SpotBot in either the Surface
or Set-In stain cycle. To begin cleaning
again, you will need to select one of the 2
cycles.

6. Status Indicators Much like the

dishwasher in your kitchen, the Status
Indicators will instruct you as to what is
going on within a cleaning cycle. You will
hear changes in the sound of the machine
at different points in a cycle. When your
selected cleaning cycle is complete, the
Finish light will illuminate and you will
hear a “beep” every 5 seconds until you
depress the stop button.

www.bissell.com

ug120-4070_1200_408.indd 8

800.237.7691

10/14/08 1:07:43 PM

Operation
To begin cleaning
1. Plug your SpotBot in. The Power light will illuminate instructing you that there is power to the
unit and it is ready to go.

2. Place the filled Clean/Solution tank on to the
unit

Handsfree cleaning
1. Place the unit directly over the spot or stain,
making sure the stain is in the center of the
handsfree cleaning area.

2. Select which cleaning cycle (surface stain or

set-in) you would like to begin with. Your
SpotBot will begin spraying, brushing and
suctioning up the spots and stains, in its
pre-programmed cycle. Both cycles have
been tested and proven to deliver superior
cleaning results, taking the guesswork out of
cleaning for you.

3. When the cleaning cycle you have selected

is complete, the SpotBot will beep. The beep
will continue until you hit the STOP button.

4. Pick up the unit and check the area that
was cleaned.

5. If you have used Oxy GEN2, this chemical

Tip:
Some difficult stains may
require that you run the
cleaning cycle a second
time.

will continue to work for the next six to eight
hours. Cleaning your spots and stains all the
way to the backing of the carpet.

www.bissell.com

ug120-4070_1200_408.indd 9

800.237.7691

10/14/08 1:07:44 PM

Operation
Manual/hose cleaning
1. Remove the hose from the unit by
depressing the release button.

2. a. Remove the Tough Stain Brush from the
back of the unit.

b. Attach the Tough Stain Brush onto the
grip of the flex hose.

3. Select the manual/hose button on the
control panel to start the SpotBot.

NOTE: In manual mode, the SpotBot will not
turn on until the grip is removed from the
unit. If it is not removed within 30 seconds
of pushing the start button, the unit will
shut off.

4. Begin cleaning by holding the tool no more
than six inches above the soiled surface.
Depress the spray trigger for about
5 seconds to apply the cleaning solution to
the soiled area. Release the trigger. Be
careful not to over wet.

5. Using the brush on the tool, gently scrub the

soiled area for about 30 seconds or until the
soiled area appears to be clean.
6. To suction up the dirt and cleaning solution,
position the suction nozzle over the cleaned
area, apply downward pressure on the tool,
and pull nozzle toward you. You should see the
dirty solution pass through the nozzle. Continue
until no more solution can be removed.
Normally, this step will require no more than
one minute of back and forth passes.
NOTE: In manual mode, the SpotBot is
equipped with a safety feature which will
shut the unit off after 30 minutes. Press
start to resume cleaning.

7. If the stain is still visible, repeat steps 4-6
as necessary.

Tip:
One of the effective stain
removing ingredients in Oxy
Gen2 is Hydrogen Peroxide.
Certain people may be
affected by the product
when it comes into contact
with their skin; it may turn
the skin white and/or cause
tingling. Washing your hands
after use and applying hand
lotion will remove any
possible white discoloration.

8. When the cleaning is complete, lightly drag

the suction nozzle across the stain for about
two minutes to further aid in drying the
cleaned area.

9. Press the Manual/Hose button to turn off
the SpotBot.

10. Unplug the machine, wrap the cord on the

cord wraps and wrap the hose around the
machine so that the wand can be placed in
the holder for convenient storage.

www.bissell.com

ug120-4070_1200_408.indd 10

Tip:
Check upholstery stuffing
before cleaning. Colored
stuffing may bleed through
the fabric when it becomes
wet.

800.237.7691

10/14/08 1:07:47 PM

Maintenance and care
Hose cleaning
1. Before turning off the SpotBot, suction up

clean water to thoroughly rinse out the
inside of the vacuum flex hose. Then, lift
the vacuum flex hose upwards to drain any
remaining water into the dirty tank.

2. Disconnect the cleaning tool from the

vacuum flex hose by pushing down on the
button lock and pulling straight off (do not
twist tools to remove them).

3. Once the tool is removed from the vacuum

flex hose it can be cleaned by rinsing under
clean running water.

Storage
1. Unplug the power Cord from the outlet. Wrap
power cord around the cord wrap.

2. Empty and rinse the dirty/collection tank

after each use, or when dirty water reaches
the indicated maximum fill line. To remove
the tank, lift up the dirty tank latch and pull
the tank out. Dump out the dirty water and
rinse with clean. Replace the tank into the
unit for storage. After using the SpotBot’s
handsfree feature, wipe the window and
brushing area with a soft cloth.

3. If you were using your SpotBot manually, wrap

the vacuum flex hose around the unit and
secure the spray trigger into the receiver on the
front of the unit.

Tip:
If a significant amount of
water and solution(s) remain
in the clean tank, your unit
can be stored with liquid in
the clean tank. However, if
you have added Oxy GEN2
into the clean tank, fresh
Oxy GEN2 should be added
prior to the next use to
optimize performance.

4. Store unit indoors at room temperature
(40° to 110°F).

Tip:
Clean out the Black Valve
periodically inside of the
Dirty/Collection Tank.
www.bissell.com

ug120-4070_1200_408.indd 11

800.237.7691

10/14/08 1:07:48 PM

Troubleshooting
Handsfree Cleaning
Cleaner will not run
Possible Causes

Remedies

1. Power cord not plugged in.

1. Check electrical plug.

2. Blown fuse/tripped breaker.
2. Replace household fuse or
reset breaker.
3. The unit is not sitting flat on the carpeting.
3. Remove what is obstructing the
floors surface.
4. Vacuum Flex Hose is not snapped
4. Check to make sure the Vacuum
into place securely. Flex Hose is snapped into place.

Unusual or Odd Noise
Possible Causes

Remedies

1. Clean/Solution tank is out of fluid.

1. Fill Clean Solution Tank.

Reduced or No Spray
Possible Causes

Remedies

1. Spray Tip clogged.

1. Clean Spray Tip.

2. Clean/Solution tank is out of fluid.

2. Fill Clean/Solution Tank.

3. Clean/Solution tank is not inserted
3. Gently press the Clean/Solution
into the unit securely. Tank Until you see “bubbles”
coming from the base of the tank.

No Suction
Possible Causes

Remedies

1. Tank is full.

1. Empty tank.

2. Dirty/Collection tank latch is not down.
2. Push latch down, securely
into place.
3. Black Valve on the Dirty/Collection
3. Replace Black Valve into Dirty/
Tank is missing. Collection tank.

www.bissell.com

ug120-4070_1200_408.indd 12

800.237.7691

10/14/08 1:07:48 PM

Troubleshooting
Manual/Hose Cleaning
Cleaner will not run
Possible Causes

Remedies

1. Power cord not plugged in.

1. Check electrical plug.

2. Blown fuse/tripped breaker.
2. Replace household fuse or
reset breaker.
3. Hose not removed from receiver.

3. Remove Hose.

Unusual or Odd Noise
Possible Causes

Remedies

1. Clean/Solution tank is out of fluid.

1. Fill Clean Solution Tank.

Reduced or No Spray
Possible Causes

Remedies

1. Spray Tip clogged on Tough Stain Brush.

1. Clean Spray Tip.

2. Clean/Solution tank is out of fluid.

2. Fill Clean/Solution Tank.

3. Clean/Solution tank is not inserted
3. Gently press the Clean/Solution
into the unit securely. Tank Until you see “bubbles”
coming from the base of the tank.

No Suction
Possible Causes

Remedies

1. Tank is full.

1. Empty tank.

2. Dirty/Collection tank latch is not down.
2. Push latch down, securely
into place.
3. Black Valve on the Dirty/Collection
3. Replace Black Valve into Dirty/
Tank is missing. Collection tank.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.
For any question or concern, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691

www.bissell.com

ug120-4070_1200_408.indd 13

800.237.7691

10/14/08 1:07:48 PM

BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday

8 a.m. — 10 p.m. EST
9 a.m. — 8 p.m. EST

Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services

Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event
of a warranty claim. See Warranty on page 16 for details.

Please register your new BISSELL product at
www.bissell.com/productregistration

www.bissell.com

ug120-4070_1200_408.indd 14

800.237.7691

10/14/08 1:07:48 PM

Replacement parts
Item

Part No.

Part Name

1
2
3
4

203-6643
203-6644
203-6645
203-6648

Clean Tank Assembly (includes Cap/Insert)
Clean Tank Cap
Dirty Tank
Hose Clip

Additional assessories
Item
1
2
3
4
5
6

7
8
9
10
11

Part No.

Part Name

497
499
797
799
801

64 oz. Little Green® Formula
32 oz. Little Green® Formula
64 oz Pet Odor & Stain Removal™ Formula
32 oz Pet Odor & Stain Removal™ Formula
32 oz Oxy GEN2®

314-9162
203-6652
203-6868
203-6869
203-6872
203-6647

3" Tough Stain Brush
TurboBrush®
4” Upholstery Tool
6” Wide Stair Tool
Spraying Crevice Tool
Storage Tray

7/8

9/10

www.bissell.com

ug120-4070_1200_408.indd 15

Earn Rewards Points!

To qualify you for discounts, rebates, and other BISSELL perks.
Visit www.bissell.com/rewards to learn more.

800.237.7691

10/14/08 1:07:50 PM

Warranty - BISSELL SpotBot
This warranty gives you specific legal rights, and you may also have other rights which may vary from state
to state. If you need additional instruction regarding this warranty or have questions regarding what it may
cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.

Limited One Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s
option, free of charge from the date of purchase by the original purchaser, for one year any defective or
malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to
fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence,
abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event
of a warranty claim.

If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty,
contact BISSELL Consumer Services.
Website or E-mail:
www.bissell.com
Use the “Customer Services” tab.
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET
Or write:
BISSELL Homecare Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE
USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
NOTE: Please keep your original sales receipt. It provides proof of
date of purchase in the event of a warranty claim

www.bissell.com

ug120-4070_1200_408.indd 16

800.237.7691

10/14/08 1:07:51 PM

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2008:10:14 13:07:37-04:00
Creator                         : Adobe InDesign CS3 (5.0.3)
Modify Date                     : 2014:12:07 11:59:33+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:12:07 11:59:33+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0.3)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 8460 bytes, use -b option to extract)
Instance ID                     : uuid:15370072-629f-8a4a-810c-0d6584f8ad34
Document ID                     : adobe:docid:indd:f1619fc1-9b7a-11dd-bba1-a7450aa1a3ba
Rendition Class                 : proof:pdf
Derived From Instance ID        : 9d1f8fbd-8d7b-11dd-a605-bcd564ced63e
Derived From Document ID        : adobe:docid:indd:9d1f8fbc-8d7b-11dd-a605-bcd564ced63e
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:0ff5b82b-ffa7-11da-a8e5-000a95e0a048, uuid:cee956b9-be5a-11d9-ae4a-000a95e0a048, uuid:bbbd1798-c458-11d9-b8c3-a4aeb4916605, uuid:5C089A08DEEDDC118EB68D5F9BF3B58E, uuid:CC51AE67B2FDDC119D4FE0A1CB920707, uuid:9de51c2d-c2db-11d9-a847-844344691c1e, uuid:954475b2-c2e6-11d9-a847-844344691c1e, uuid:51955A23B3FDDC119D4FE0A1CB920707, uuid:57b2d544-c237-11d9-ba35-acade414fe39, uuid:A53626EADDEDDC118EB68D5F9BF3B58E, uuid:D857F3F7DEEDDC118EB68D5F9BF3B58E, uuid:37D2960B66F6DC11A9E8B4DC257ACBBA, uuid:D17B622330F7DC11AF9487FD264247CC, uuid:37706C0A78F6DC11A9E8B4DC257ACBBA, uuid:A28A48ACDEEDDC118EB68D5F9BF3B58E, uuid:41FB9444ED9F11DA8C08C3A0224F4969, uuid:8C634DBCDDEDDC118EB68D5F9BF3B58E, uuid:E06DF5B82FF7DC11AF9487FD264247CC, uuid:D6FD1CB02EF7DC11AF9487FD264247CC, uuid:C96522372FF7DC11AF9487FD264247CC, uuid:1164130864F6DC11A9E8B4DC257ACBBA, uuid:0829281863F6DC11A9E8B4DC257ACBBA, uuid:D6FD1CB02EF7DC11AF9487FD264247CC, uuid:0206DCE52EF7DC11AF9487FD264247CC, uuid:004170D265F6DC11A9E8B4DC257ACBBA, uuid:084170D265F6DC11A9E8B4DC257ACBBA, uuid:5E1FB6B164F6DC11A9E8B4DC257ACBBA, uuid:CC51AE67B2FDDC119D4FE0A1CB920707, uuid:33588572B2FDDC119D4FE0A1CB920707, uuid:DE2CCB98F1F8DC11B0538483122FEB96, uuid:51955A23B3FDDC119D4FE0A1CB920707, uuid:57b2d544-c237-11d9-ba35-acade414fe39, uuid:9de51c2d-c2db-11d9-a847-844344691c1e, uuid:BB004E6775FDDC119D4FE0A1CB920707, uuid:93D5B5D3EEF8DC11B0538483122FEB96, uuid:1B9FA7D7F1F8DC11B0538483122FEB96, uuid:954475b2-c2e6-11d9-a847-844344691c1e
Manifest Reference Document ID  : uuid:C47B8D53011311DBA9F7C4C7F725CED6, uuid:8b3e4ee9-7c68-11d9-8d59-0050e42ea106, adobe:docid:photoshop:bbbd1797-c458-11d9-b8c3-a4aeb4916605, uuid:5B089A08DEEDDC118EB68D5F9BF3B58E, uuid:87CFAF7EAFFDDC119D4FE0A1CB920707, adobe:docid:photoshop:9de51c2c-c2db-11d9-a847-844344691c1e, adobe:docid:photoshop:954475b1-c2e6-11d9-a847-844344691c1e, uuid:50955A23B3FDDC119D4FE0A1CB920707, adobe:docid:photoshop:57b2d543-c237-11d9-ba35-acade414fe39, uuid:A43626EADDEDDC118EB68D5F9BF3B58E, uuid:D057F3F7DEEDDC118EB68D5F9BF3B58E, uuid:36D2960B66F6DC11A9E8B4DC257ACBBA, uuid:43B4049F5FF6DC11A9E8B4DC257ACBBA, uuid:51B7A7F666F6DC11A9E8B4DC257ACBBA, uuid:A18A48ACDEEDDC118EB68D5F9BF3B58E, uuid:41FB9443ED9F11DA8C08C3A0224F4969, uuid:8B634DBCDDEDDC118EB68D5F9BF3B58E, uuid:DF6DF5B82FF7DC11AF9487FD264247CC, uuid:4CE2D6282EF7DC11AF9487FD264247CC, uuid:C86522372FF7DC11AF9487FD264247CC, uuid:1064130864F6DC11A9E8B4DC257ACBBA, uuid:0729281863F6DC11A9E8B4DC257ACBBA, uuid:4CE2D6282EF7DC11AF9487FD264247CC, uuid:0106DCE52EF7DC11AF9487FD264247CC, uuid:0236360265F6DC11A9E8B4DC257ACBBA, uuid:074170D265F6DC11A9E8B4DC257ACBBA, uuid:5D1FB6B164F6DC11A9E8B4DC257ACBBA, uuid:87CFAF7EAFFDDC119D4FE0A1CB920707, uuid:32588572B2FDDC119D4FE0A1CB920707, uuid:DD2CCB98F1F8DC11B0538483122FEB96, uuid:50955A23B3FDDC119D4FE0A1CB920707, adobe:docid:photoshop:57b2d543-c237-11d9-ba35-acade414fe39, adobe:docid:photoshop:9de51c2c-c2db-11d9-a847-844344691c1e, uuid:BA004E6775FDDC119D4FE0A1CB920707, uuid:92D5B5D3EEF8DC11B0538483122FEB96, uuid:1A9FA7D7F1F8DC11B0538483122FEB96, adobe:docid:photoshop:954475b1-c2e6-11d9-a847-844344691c1e
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 16

EXIF Metadata provided by EXIF.tools

Bissell Spotbot 1200 7887 Users Manual

Navigation menu

Versions of this User Manual:

Views

Navigation