9800 Series User Manual 9801

2015-04-24

• Safety Summary
  • Compliance Statements
  • Safety Symbols
• 1 General Information
  • 1.1 Product Overview
  • 1.2 Package Contents
  • 1.3 Product Dimensions
  • 1.4 Front Panel Overview
    • Front Panel Description
  • 1.5 Rear Panel Overview
    • Rear Panel Description
  • 1.6 Display Overview
    • Display Description
• 2 Getting Started
  • 2.1 Input Power and Fuse Requirements
    • Input Power
    • Fuse Requirements
    • Fuse Replacement
  • 2.2 Output Connections
  • 2.3 Preliminary Check
    • Self-test Errors
    • Output Check
      • Voltage and Frequency Check
    • Check Model and Firmware Version
• 3 Front Panel Operation
  • 3.1 Menu Options
    • How to Access the Menu
  • 3.2 Configure Voltage and Frequency Output
    • Setting Voltage
    • Output Range
    • Setting Frequency
    • Setting Phase Angle
  • 3.3 SYSTEM Menu
    • Restore Factory Default Settings
    • Configure Power-On Settings
    • Configure Power-Out State
    • Enable/Disable Key Sound
    • Configure Trigger Source
    • Communication Setup
      • RS-232
      • USBTMC
      • LAN (Ethernet)
    • Save/Recall Instrument Settings
      • Save Settings
      • Recall Settings
  • 3.4 CONFIG Menu
    • Voltage Limits
      • Minimum Voltage Limit
      • Maximum Voltage Limit
    • Frequency Limits
      • Minimum Frequency Limit
      • Maximum Frequency Limit
    • Current Protection
      • Current (RMS) Protection Point
      • Current (Peak) Protection Point
    • External BNC
  • 3.5 Dimmer Output Simulation
  • 3.6 List Mode
    • Configure List Setting
      • List-Set
    • Edit List File
      • Setting PLD Parameters
    • Recall and Run Program
      • Recall Program
      • Run Program
    • Power Line Disturbance Simulation (PLD)
  • 3.7 Sweep Mode
    • Edit Sweep File
    • Recall and Run Sweep
      • Recall Sweep
      • Run Sweep
  • 3.8 Key Lock
• 4 Remote Operation
  • 4.1 Interface Connection
    • RS-232
    • USBTMC
    • LAN
  • 4.2 Remote Commands
• 5 Troubleshooting Guide
  • General
  • Remote Control
• 6 Specifications
  • Calibration
• SERVICE INFORMATION
• LIMITED TWO-YEAR WARRANTY