Black Box Modem 3600 Users Manual V3600 Bk
3600 to the manual 1401e68c-1f5a-4992-931f-5d52ff2bbb88
2015-02-02
: Black-Box Black-Box-Black-Box-Modem-3600-Users-Manual-481947 black-box-black-box-modem-3600-users-manual-481947 black-box pdf
Open the PDF directly: View PDF
Page Count: 270 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Trademarks
- FCC Requirements
- Special Requirements For Canada
- Normas Normas Oficiales Mexicanas (NOM) Electrical Safety Statement
- Chapter 1
- Shelf-Mount Units
- Features
- Software
- Description
- Chapter 2
- Mounting Accessories
- Electrical Installation
- DTE Connection
- Telephone Line Connection
- Shelf-Mount MD1000C Installation
- Chapter 3
- Option Selection
- Power-Up
- Placing a Call
- Answering a Call
- Ending a Call
- Chapter 4
- LED Descriptions
- LCD Menus
- LCD Menu Operation
- Front Panel Security
- Chapter 5
- Command Categories
- Operation Modes
- Sending Commands to the Modem
- Response Commands
- Dial Commands
- Answering A Call
- Terminal Interface Commands
- General Commands
- Changing from Data Mode to Command Mode +++
- Local Character Echo E
- Online Character Echo F
- Hanging Up H, H1
- Fast Disconnect H2, H3
- EPROM Check I
- Speaker Volume L
- Speaker Control M
- Return Online O
- Long Space Disconnect Y
- V.22 bis Guard Tones &G
- Asynchronous / Synchronous Mode Selection &M
- Make / Break Dial Pulse Ratio &P
- Synchronous Transmit Clock Source &X
- V.34 Rate Selection Thresholds *TH
- V.34 Asymmetric Bit Rates *AS
- Modulation *MM
- Maximum DCE Speed %B
- Minimum DCE Speed %L
- Auto Retrain %E
- Automatic Rate Adaption %R
- Manual Rate Adaption *RR
- Product Revision Level %V
- Online Quick Reference $H
- Product Serial Number $V
- Talk / Data *DA
- V.32 Fast Train *FT
- Incoming Call *IC
- Line Current Disconnect *LC
- Disable AT Command Set *NT
- Dial Line Transmit Level *TDn
- Private Line Operation
- Configuration Commands
- Configuration Profiles
- Active Profile
- Stored Profile
- Factory Profile
- Storing a Configuration &W
- Powerup Option Set &Y
- Load Factory Options &Fn
- Reset to Stored Configuration Z
- View Configuration Profiles/Received Signal Options &V
- Storing a Telephone Command Line &Zx=n, *CNx,n, *ND
- Retaining / Restoring Options *RO
- Soft Download Password %P1, $Y
- Remote Configuration
- Chapter 6
- CCITT V.42 bis Error Control Protocol
- Reliable Mode
- Auto-Reliable Mode
- Constant Speed Interface
- Data Compression
- Normal Mode
- Direct Mode
- Flow Control
- Protocol Commands
- Disconnect Buffer Delay %D
- Serial Port (DTE) Constant Speed \J
- V.42 Optional Detection Phase \M
- Operating Mode \N
- Auto-Reliable Fallback Character %An
- Serial Port Flow Control \Q
- XON/XOFF Pass Through \X
- Data Link Flow Control \G
- Break Control \Kn
- Inactivity Timer \T
- Maximum Reliable Block Size \A
- Transmit Break / Set Break Length \B
- Set Auto-Reliable Buffer \C
- V.42bis Data Compression %C
- Chapter 7
- Test Categories
- Terminating a Test in Progress &T
- Testing the Local Modem
- Testing the Remote Modem
- Chapter 8
- Autocallback Security
- Low Security Operation
- Low Security Commands
- High Security
- Security Levels
- Superuser
- High Security Commands
- Enabling High Security $EH=pw
- Disabling High Security $D
- Setting Passwords $Pn=pw$pw
- Set Security Levels $Ln=m
- Set User Callback Number $Cn=m
- Extended Features $W
- Display Extended Feature Status $W?
- Display / Reset Illegal Access Attempt Counters $M, $Mn, $M*
- Factory Reset $F=pw$pw
- Removing a User $Rn
- Security Status $E?
- Display User Status $S?
- Verify User Information $In, $IBn
- Request Superuser Privilege $S=pw
- Local Logon Command $n=pw
- Local Logoff Command $$
- Remote Logon Procedure $n=pw
- Chapter 9
- Fax Operation
- Modem Initialization
- Fax Defaults
- Fax Associated Options
- Class 1 Details
- Class 1 Commands
- Dial Command D
- Answer Command A
- On Hook H
- Off Hook H1
- Class 0 Operation +FCLASS=0
- Class 1 Operation +FCLASS=1
- Service Class Indication +FCLASS?
- Service Class Capabilities +FCLASS=?
- Transmit Silence +FTS=(Time)
- Receive Silence +FRS=(Time)
- Fax Transmit and Receive Modes
- Facsimile Transmit +FTM=(Mod)
- Facsimile Receive +FRM=(Mod)
- HDLC Transmit +FTH=(Mod)
- HDLC Receive +FRH=(Mod)
- Test Supported Range of Values +FTx=?, +FRx=?
- Class 1 Result Code +FCERROR
- Fax Autoanswer +FAA=
- DTE Autobaud for Fax Autoanswer *FR
- Binary File Transfer
- Chapter 10
- S-Registers
- S-Register Operation Sn?, Sn?^
- Changing Register Values Sn=v, Sn=^v
- Individual Bit Command Sn . # =v
- Autoanswer S0
- Ring Count S1
- Escape Character S2
- End-of-Line Character S3
- Line-Feed Character S4
- Backspace Character S5
- Pause Before Dialing S6
- Pause for Ringback and Carrier Detection / Wait for 2nd Dial Tone S7
- Pause Interval for Comma S8
- Carrier Detect Time S9
- Lost Carrier Detect Time S10
- DTMF Tone Duration S11
- Escape Sequence Pause S12
- S13
- Bit Mapped S14
- S15
- System Tests S16
- S17
- Test Timeout S18
- S19, 20
- Bit Mapped S21
- Bit Mapped S22
- Bit Mapped S23
- S24
- DTR State Recognition S25
- RTS/CTS Delay S26
- Bit Mapped S27
- Lookback Timer S28
- Bit Mapped S29
- Bit Mapped S30
- S31
- Bit Mapped S32
- S33
- Bit Mapped S34
- DTR / Dial Backup Number to Dial S35
- S36-S40
- Remote Configuration Escape Character S41
- Remote Configuration Guard Time S42
- S43
- XON Character from DTE S44
- XOFF Character from DTE S45
- S46-48
- XON Character to DTE S49
- XOFF Character to DTE S50
- Dial Line Transmit Level S51
- Leased Line Transmit Level S52
- Automatic Rate Adaption Threshold S53
- Flow Control S54
- S55
- V.42 Compression Control S56
- Bit Mapped S57
- Inactivity Timer S58
- Break Control S59
- Bit Mapped S60
- DTE Options S61
- Disconnect Buffer Delay S62
- Maximum Transmit Block Size S63
- Auto-Reliable Fallback Character S64
- S65-66
- Link Speed Status S67
- S68
- DCE Independent Speed S69
- Operating Mode S70
- Operating Mode Status S71
- Bit Mapped S72
- Password Timeout S73
- Callback Delay S74
- Callback Retry S75
- Callback Retry Delay S76
- Lockout Threshold S77
- Autocallback Timer S78
- Break Length S79
- Serial Port or DTE Speed S80
- Minimum DCE Speed S81
- Negotiation Status S82
- S83
- Bit Mapped S84
- S85-S87
- Modulation Type S88
- S89-S90
- Current Modulation S91
- S92 - S94
- V.34 Settings S95
- V.34 Asymmetric Settings S96
- Bit Mapped S97
- S98- S100
- Chapter 11
- Autodialer Command Strings and Parameters
- Software Guidelines
- Dial Parameters
- V.25 bis Commands and Responses
- Dial Command CRN nn...n
- Program Number Command PRN a;nn...n
- Intermediate Call Progress Response
- Dial Stored Number CRS a
- Request List of Stored Numbers RLN
- Disregard Incoming Call DIC
- Connect Incoming Call CIC
- Redial Last Number CRR n
- Link Number by Address PRL a;b
- Request List of Linked Numbers RLL
- Request List of Version RLV
- MODEM OPTIONS COMMAND PRO xxx;yy;0;0...
- Save Current Settings PRK
- Restore Factory Settings PRP n
- Request List of Stored Options RLO xxx; yy
- Options
- Chapter 12
- General
- Fuse Replacement
- Maintenance
- Calling Technical Support
- Appendix A
- Specifications
- Size
- Environmental Conditions
- Power Requirements
- Telephone Line
- Digital Interface
- Modem Data Rates
- Fax Rates
- Modulations
- Fax Modulation
- Internal Transmit Clock Frequency
- External Transmit Clock Frequency
- Transmit Output Level
- Operation
- Carrier Detect Level
- Telco Connection
- Testing
- Line Equalization
- RTS/CTS Delay
- Link Layer Protocols
- Appendix B
- DIAL Pin Functions
- TELSET/LEASED LINE Pin Functions
- Appendix C
- Jumper Option Selection
- Removing the Cover
- Replacing the Cover
- Appendix D
- Fault Isolation Procedure
- Modem and Telephone Line Check
- Appendix E
- General
- Status Registers
- V.25 bis Dialer Commands
- Factory Option Sets
- Factory Option Set #1
- (Asynchronous Dial-up with V.42 bis Protocol) (AT&F or AT&F1)
- (Asynchronous Dial-up without V.42 bis Protocol) (AT&F2)
- (Synchronous Dial-up) (AT&F3)
- (Synchronous 4-wire Leased Line) (AT&F4)
- (Asynchronous 4-wire Leased Line with V.42bis Protocol) (AT&F5)
- (Asynchronous 4-wire Leased Line without V.42bis Protocol) (AT&F6)
- (Synchronous 2-wire Leased Line Normal Originate) (AT&F7)
- (Synchronous 2-wire Leased Line Forced Answer) (AT&F8)
- (Synchronous V.25bis Dialer) (AT&F9)
- Factory Option Set #1
- Appendix F
- Appendix H
- What You Need
- Steps For Downloading
- Troubleshooting
- Introduction
- V3600-bkTOC.pdf
- 03REGINF.pdf
- V3600-bkIX.pdf
- V3600-bkIX.pdf
- V3600-bkTOC.pdf