BlackBerry RAP40GW BlackBerry Wireless Handheld User Manual bb safety info booklet

BlackBerry Limited BlackBerry Wireless Handheld bb safety info booklet

UserManual.wiki >

RAP40GW User Manual >

Manual statements

Contents

1. Manual
2. Manual statements
3. Manual statement

Manual statements

BlackBerry® Wireless Handheld Safety and Product Information

3Safety and Product InformationSafety informationPlease read these safety and operation instructions before using the BlackBerry Wireless Handheld™or any accessories provided with the handheld. Retain these instructions for future use.In some countries there may be restrictions on using Bluetooth® devices. Check with your localauthorities.Electrical safetyCharge the handheld using only the USB cable HDW-06610-001, Travel charger ASY-04078-001,Automotive charger ASY-04195-001, or other charging accessory provided or specifically approved byResearch In Motion Limited (RIM) for use with this handheld. Any approval from RIM under thisdocument must be in writing and must be from a person authorized to provide such approval. Use ofany other accessory will invalidate any warranty provided with the handheld and might be dangerous.Use the charging accessories provided with the handheld or any other approved charging accessoriesonly from the type of power source indicated on the marking label. Before using any power supply,verify that the mains voltage is in accordance with the voltage printed on the power supply. Do not overload wall outlets, extension cords, or convenience receptacles as this might result in a riskof fire or electric shock. To reduce the risk of damage to the cord or the plug, pull the plug rather thanthe cord when you disconnect the charging accessory from the wall outlet or convenience receptacle.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptaclesand the point where the power cord connects to the handheld. Unplug charging accessories duringlightning storms or when unused for long periods of time. Do not use charging accessories outside or in any area exposed to the elements. Refer to the documentation that came with the handheld for more information on inserting the batteryand connecting the power supply.Battery safety and disposalThe handheld contains a removable lithium-ion battery. Do not dispose of either the handheld or thelithium battery in a fire. Dispose of the lithium battery in accordance with the laws and regulations inyour area governing disposal of such cell types. The battery might present a fire or chemical burn hazard if mistreated. Do not disassemble, crush, orpuncture the battery. Do not heat the battery above 60°C (140°F). Do not allow metal objects to contactthe battery terminals. Use only the battery that RIM specifies for use with your particular handheld model. Using any otherbattery will invalidate any warranty provided with the handheld and might present a risk of fire orexplosion.Driving safetyCheck the laws and regulations regarding the use of wireless handhelds in the areas where you drive.Always obey them. Also, if using the handheld as a phone while driving, please use the followingguidelines:• Give your full attention to driving; driving safely is your first responsibility.• Use hands-free operation if it is available.• Pull off the road and park before making or answering a phone call. Do not use the other features of the handheld while driving. Have a passenger in the vehicle use thehandheld for you, or find a safe location to stop your vehicle prior to using the handheld.

4Safety and Product InformationStore the handheld safely before driving your vehicle. Do not use any charging accessory as a means ofstoring the handheld while you are in a vehicle. If your vehicle is equipped with an air bag, do notplace the handheld or other objects above the air bag, or in the air bag deployment area. If in-vehiclewireless equipment is improperly stored or installed, and the air bag inflates, serious injury couldresult.Radio frequency (RF) signals might affect improperly installed or inadequately shielded electronicsystems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. Ifany equipment has been added to your vehicle, you should also consult the manufacturer of thatequipment for information on RF signals.AccessoriesUse only those accessories approved by RIM. Using any accessories not approved by RIM for use withthis particular handheld model will invalidate any approval or warranty applicable to the handheldand might be dangerous.Antenna careUse only the supplied integral antenna. Unauthorized antenna modifications, or attachments coulddamage the handheld and might violate Federal Communications Commission (FCC) regulations.Operating and storage temperaturesSituate the handheld or handheld accessories away from heat sources, such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.If you are not going to use the handheld for more than two weeks, turn the handheld power off,remove the battery, and follow the operating and storage temperatures listed below:Interference with electronic equipmentMost modern electronic equipment is shielded from RF signals. However, certain electronic equipmentmight not be shielded against the RF signals from the handheld.Pacemakers: Consult a physician or the manufacturer of your pacemaker if you have any questionsregarding the effect of RF signals on your pacemaker. If you have a pacemaker, verify that you areusing the handheld in accordance with the safety requirements associated with your particularpacemaker, which might include the following:• Always keep the handheld more than 7 inches (20 cm) from the pacemaker when the handheld is turned on.• Do not carry the handheld in your breast pocket.• When using the handheld as a phone, use the ear opposite the pacemaker for making and receiving calls to minimize the potential interference. • If you have any reason to suspect that interference is taking place, turn the handheld radio and the Bluetooth radio off immediately.Hearing aids: Some digital wireless devices may interfere with some hearing aids. In the event of suchinterference, consult your service provider or contact the manufacturer of your hearing aid to discussalternatives.Other medical devices: If you use any other personal medical device, consult the manufacturer of yourdevice to determine if they are adequately shielded from external RF energy. Your physician may beable to assist you in obtaining this information.Handheld operating 32 to 122°F (0 to 50°C) Travel charger operating 32 to 113°F (0 to 45°C)Handheld storage 50 to 86°F (10 to 30°C) Travel charger storage -22 to 167°F (-30 to 75°C)

5Safety and Product InformationHealth care facilities: Turn the handheld radio and the Bluetooth radio off in health care facilitieswhen any regulations posted in these areas instruct you to do so. Hospitals or health care facilities maybe using equipment that could be sensitive to external RF energy.Aircraft: Federal Aviation Administration (FAA) and FCC regulations prohibit using the radio of thehandheld while in the air. Turn the handheld radio and the Bluetooth radio off before boarding anaircraft. The effect of using the handheld radio or the Bluetooth radio in an aircraft is unknown. Suchuse might affect aircraft instrumentation, communication and performance, might disrupt thenetwork, might otherwise be dangerous to the operation of the aircraft, and might be illegal. Use anyother handheld applications in accordance with airline regulations for electronic devices.Dangerous areasPotentially explosive atmospheres: Turn the handheld radio and the Bluetooth radio off when in anyarea with a potentially explosive atmosphere, and obey all signs and instructions. Sparks in such areascould cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They includefueling areas such as gasoline or petrol stations; below deck on boats; fuel or chemical transfer orstorage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where theair contains chemicals or particles, such as grain, dust, or metal powders; and any other area where youwould normally be advised to turn off your vehicle engine.Do not use the handheld phone to report a gas leak in the vicinity of the leak. Leave the area and makethe call from a safe location.Blasting areas: To avoid interfering with blasting operations, turn the handheld radio and theBluetooth radio off when in a “blasting area” or in areas posted: “Turn off two-way radio” Obey allsigns and instructions.ServiceOnly qualified service personnel should perform repairs to the handheld. Disconnect the power supplycables from the computer or electrical outlet and refer the handheld or charging accessory for service toqualified service personnel if any of the following situations occur:• the power supply cord, plug, or connector is damaged• liquid has been spilled or objects have fallen into the handheld or charging accessory• the handheld or charging accessory has been exposed to rain or water• the handheld or charging accessory becomes very hot to the touch• the handheld or charging accessory has been dropped or damaged in any way• the handheld or charging accessory does not operate normally by following the instructions in the user documentation• the handheld or charging accessory exhibits a distinct change in performanceDo not attempt to disassemble the handheld or any charging accessory. To reduce the risk of fire or electric shock, adjust only those controls that are covered in the userdocumentation for the handheld. An improper adjustment of other controls might cause damage andwill often require extensive work by a qualified technician to restore the handheld, charging accessory,or any other accessory to normal operation.Failure to observe all safety instructions contained in the user documentation for the handheld willvoid the Limited Warranty and might lead to suspension or denial of services to the offender, legalaction, or both.

6Safety and Product InformationAdditional safety guidelinesLiquids and foreign objects: Never push objects of any kind into the handheld or handheldaccessories through openings as this action might short circuit parts and cause a fire or electric shock.Do not use the handheld or handheld accessories near water (for example, near a bathtub or a sink, in awet basement, or near a swimming pool). Never spill liquid of any kind on the handheld or handheldaccessories. Stability: Do not place the handheld or handheld accessory on any unstable surface. It could fall,thereby potentially causing serious injury to a person and serious damage to the handheld or handheldaccessory. Take care when using the handheld with any charging accessories to route the power cord ina way that reduces the risk of injury to others, such as by tripping or choking.Cleaning: Do not use liquid, aerosol cleaners, or solvents on or near the handheld or handheldaccessory. Clean only with a dry cloth. Disconnect any cables from the computer and unplug anycharging accessories from the electrical outlet before cleaning either the handheld or the chargingaccessory.Compliance informationExposure to radio frequency signalsThe BlackBerry Wireless Handheld is a low power radio transmitter and receiver. When the handheldradio is on, it receives and also sends out RF signals. The handheld complies with U.S. FederalCommunications Commission (FCC), Industry Canada (IC), and European Union (EU) guidelinesrespecting safety levels of RF exposure for wireless handheld devices, which in turn are consistent withthe following safety standards previously set by Canadian, U.S., and international standards bodies: • ANSI/IEEE C95.1, 1999, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz• National Council on Radiation Protection and Measurements (NCRP) Report 86, 1986, Biological Effects and Exposure Criteria for Radio Frequency Electromagnetic Fields• Health Canada, Safety Code 6, 1999, Limits of Human Exposure to Radio Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz• EN 50360, 2001, Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz to 3 GHz)• International Commission on Non-Ionizing Radiation Protection (ICNIRP), 1998, Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)• Official Journal of the European Union, 1999, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)To maintain compliance with FCC, IC, and EU RF exposure guidelines, use only RIM-supplied orapproved accessories. The BlackBerry Wireless Handheld is designed to be carried in a RIM-approvedholster when carried on your body. When carrying the handheld while the radio is on, use the specificRIM-approved holster that has been tested for compliance. Use of accessories that are not approved byRIM might violate FCC, IC, and EU RF exposure guidelines and might void any warranty applicable tothe handheld.Specific absorption rate dataTHIS MODEL WIRELESS HANDHELD MEETS GOVERNMENT REQUIREMENTS FOREXPOSURE TO RADIO WAVES.The BlackBerry Wireless Handheld is a radio transmitter and receiver. It is designed and manufacturednot to exceed the emission limits for exposure to radio frequency (RF) energy set by the FederalCommunications Commission (FCC) of the U.S. Government, Industry Canada of the Canadian

7Safety and Product InformationGovernment (IC), and recommended by The Council of the European Union. These limits are part ofcomprehensive guidelines and establish permitted levels of RF energy for the general population. Theguidelines are based on standards that were developed by independent scientific organizationsthrough periodic and thorough evaluation of scientific studies. The standards include a substantialsafety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile handhelds employs a unit of measurement known as theSpecific Absorption Rate, or SAR. The SAR limit set by the FCC/IC is 1.6W/kg*. The SAR limitrecommended by The Council of the European Union is 2.0W/kg**. Tests for SAR are conducted usingstandard operating positions specified by the FCC/IC with the handheld transmitting at its highestcertified power level in all tested frequency bands. Although the SAR is determined at the highestcertified power level, the actual SAR level of the handheld while operating can be well below themaximum value. This is because the handheld is designed to operate at multiple power levels so as touse only the power required to reach the network. In general, the closer you are to a wireless basestation antenna, the lower the power output.Before a wireless handheld model is available for sale to the public, it must be tested and certified tothe FCC, IC, and The Council of the European Union that it does not exceed the limit established by thegovernment-adopted requirement for safe exposure under the recommendations of the InternationalCommission on Non-Ionizing Radiation Protection (ICNIRP). The tests are performed in positions andlocations (for example, at the ear and worn on the body) as required by the FCC, IC, and The Council ofthe European Union for each model. The highest SAR values for each handheld model when tested for use at the ear is outlined below:The highest SAR values for each handheld model when worn on the body, in an approved holster orcarrying case, is outlined below:Body-worn measurements differ among wireless handheld and phone models, depending uponavailable accessories and FCC, IC, and The Council of the European Union requirements. While theremay be differences between the SAR levels of various wireless devices and at various positions, they allmeet the government requirement for safe exposure.The FCC has granted an Equipment Authorization for this model handheld with all reported SARlevels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this modelhandheld is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID L6ARAP40GW (BlackBerry 7290). Additionalinformation on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &Internet Association (CTIA) web-site at http://www.wow-com.com.___________________________________* In the United States and Canada, the SAR limit for mobile handhelds used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue for the body or head (4.0 W/kg averaged over 10 grams oftissue for the extremities - hands, wrists, ankles and feet). The standard incorporates a substantialmargin of safety to give additional protection for the public and to account for any variations inmeasurements.** In Europe, the SAR limit for mobile handhelds used by the public is 2.0 Watts/kg (W/kg) averagedover 10 grams of tissue for the body or head (4.0 W/kg averaged over 10 grams of tissue for theextremities - hands, wrists, ankles and feet). The standard incorporates a substantial margin of safety togive additional protection for the public and to account for any variations in measurements.Handheld 1 g / 10 g SAR (W/kg)BlackBerry 7290 Wireless Handheld™ 0.31/0.24Handheld 1 g / 10 g SAR (W/kg)BlackBerry 7290 Wireless Handheld™ 1.38/0.88

8Safety and Product InformationThe long-term characteristics or the possible physiological effects of Radio Frequency Electromagneticfields have not been evaluated by Underwriters Laboratories Inc. (UL).FCC compliance statement (USA)FCC Class B Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:• This device may not cause harmful interference, and• This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the manufacturer’sinstructions, may cause interference harmful to radio communications.There is no guarantee, however, that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio or TV technician for help.Industry Canada certificationThis device complies with Industry Canada RSS 133, under certification number 2503A-RAP40GW(BlackBerry 7290)Class B complianceThis device complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.EU regulatory conformanceResearch In Motion Limited hereby declares that this BlackBerry Wireless Handheld device is incompliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

9Safety and Product InformationThe Declaration of Conformity made under Directive 1999/5/EC is available for viewing at thefollowing location in the EU community:Research In Motion UK Limited 36 Station Road, Egham, SurreyTW20 9LFUnited KingdomAdditional regulatory conformanceSpecific details about compliance to the following standards and regulatory bodies may be obtainedfrom Research In Motion:• PCS Type Certification Review Board (PTCRB)• Underwriters Laboratories UL60950 requirements for Canada and the United States• Radio and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC• Global Certification Forum Certification Criteria (GCF-CC) requirements

10Safety and Product InformationProduct informationMechanical propertiesWeight Approximately 5.0 oz. (142 g) including batterySize (L x W x H) 113 x 74.5 x 22 mm (4.45 x 2.93 x 0.87 in)Memory 32-MB flash memory, 4-MB SRAMPowerBattery Removable, rechargeable lithium-ion cellSIM interface Supports 3V SIM cardsPort USB compatible port for data synchronization and chargingRadio specificationsBlackBerry 7290 Wireless Handheld Quad-band support GSM 850, GSM 900, DCS 1800, PCS 1900 MHzPower class Class 1 (DCS 1800, PCS 1900), Class 4 (GSM 850) as defined in GSM 5.05, Class 4 (GSM 900) as defined in GSM 02.06Transmitting frequency GSM 824 to 849 MHz, GSM 880-915 MHz, DCS 1710 to 1785 MHz, PCS 1850 to 1910 MHzReceiving frequency GSM 869 to 894 MHz, GSM 925-960 MHz, DCS 1805 to 1880 MHz, PCS 1930 to 1990 MHzBluetooth RadioSingle-band support ISM 2.4 GHzPower class Bluetooth class 2(1 mW)Transmitting and receiving frequency 2402 to 2480 MHz

Navigation menu