Blaupunkt Car Stereo System True Users Manual 00_Frank320_Hamb420BT_gb
TRUE to the manual b08b3a23-7320-49a4-a769-31cfb4074b41
2015-02-04
: Blaupunkt Blaupunkt-Blaupunkt-Car-Stereo-System-True-Users-Manual-363161 blaupunkt-blaupunkt-car-stereo-system-true-users-manual-363161 blaupunkt pdf
Open the PDF directly: View PDF 
.
Page Count: 40
Operating and installation instructions
www.blaupunkt.com
www.blaupunkt.com
Hamburg 420 BT 1 011 202 422 / 1 011 202 423
Frankfurt 320 1 011 202 322 / 1 011 202 323
Car Radio
|
CD
|
USB
|
SD
|
Bluetooth
2
1
button
Unlock the detachable control panel
2
MENU button
Short press: Call up/close menu
Long press: Start scan function
3
On/O button
Short press: Switch on car sound system
In operation: Mute car sound system (Mute)
Long press: Switch o car sound system
4
Volume control
5
CD tray
6
Display
7
Rotary control
In the menu: Change menu level,
select menu item, change setting
Radio mode: Set frequency,
start station/PTY seek tuning
CD/MP3/WMA/iPod mode:
Track selection, fast forward/reverse
Browse mode in MP3/WMA/iPod mode: ID3
category (iPod only), select folder and track
8
button (Eject)
Eject a CD
9
Microphone (Hamburg 420 BT only)
:
USB port
;
Front AUX-IN socket
<
button (only Hamburg 420 BT)
Ending/rejecting a phone call
=
button (Hamburg 420 BT only)
Short press: Answering a call, speed dial
Long press: Open the phone book of the cell
phone or activate voice dialing
>
Keys 1 - 5
?
Infrared receiver
@
SRC button
Select memory bank or audio source
A
DIS button
Short press: Switch display
Long press: Switch display brightness
B
SD card slot
Access only with detached control panel
18
Controls
15
3 5 621 8
12131617 14
4 7
11 10
9
3
Contents
Safety notes ...................................................... 4
Symbols used .............................................................. 4
Road safety .................................................................. 4
General safety notes ................................................. 4
Declaration of conformity ...................................... 5
Cleaning notes .................................................. 5
Disposal notes................................................... 5
Scope of delivery .............................................. 5
Optional equipment
(not part of the scope of delivery) .......................5
Placing the device in operation ....................... 5
Attaching/detaching the control panel ............ 5
Display language (only Hamburg 420 BT) ........ 6
Setting the reception area ..................................... 6
Switching on/o ........................................................ 6
Volume .......................................................................... 6
Display brightness ..................................................... 7
Switching demo mode on/o ............................... 7
Tra c information ............................................ 7
Radio mode ....................................................... 7
RDS.................................................................................. 7
Changing to radio mode or selecting
a memory bank .......................................................... 8
Tuning into a station ................................................ 8
Storing stations or calling stored stations ........ 8
Scanning stations ...................................................... 8
Storing stations automatically (Travelstore) .... 9
PTY .................................................................................. 9
Con guring the display .........................................10
CD/MP3/WMA/iPod mode .............................. 10
Basic information .....................................................10
Changing to CD/MP3/WMA/iPod mode .........11
Inserting/ejecting a CD .........................................11
Connecting/removing a USB data carrier .......11
Inserting/removing the memory card .............12
Selecting tracks ........................................................12
Fast searching ...........................................................12
Interrupting playback ............................................12
Scanning all tracks ..................................................12
Playing tracks in random order ..........................13
Repeatedly playing individual tracks or
directories ..................................................................13
Con guring the display .........................................13
Browse mode ............................................................14
Searching by track names
(not in iPod mode) ..................................................15
Bluetooth®
(Hamburg 420 BT only) .................................. 15
Bluetooth® menu .....................................................15
Pairing and connecting a device .......................16
Telephone functions...............................................17
Bluetooth® streaming mode................................20
Phone book functions ...........................................20
Additional functions in
the Bluetooth® menu .............................................21
External audio sources ................................... 23
Front AUX-IN socket ................................................23
Sound settings ................................................ 23
Calling and exiting the "AUDIO" menu ............23
Making settings in the "AUDIO" menu .............24
Setting the 3-band equaliser ...............................25
User settings ................................................... 26
Calling the user menu and selecting
a menu .........................................................................26
Making settings in the "TUNER" menu ............27
Making settings in the "DISPLAY" menu .........28
Making settings in the "VOLUME" menu ........29
Making settings in the "CLOCK" menu ............30
Making settings in the "VARIOUS" menu ........30
Factory settings .............................................. 31
Useful information ......................................... 32
Warranty .....................................................................32
Service .........................................................................32
Technical data ................................................. 32
Installation instructions ................................ 33
4
Safety notes
The car sound system was manufactured accord-
ing to the state of the art and established safety
guidelines. Even so, dangers may occur if you do
not observe the safety notes in these instructions.
These instructions contain important informa-
tion to easily and safely install and operate the car
sound system.
• Read these instructions carefully and com-
pletely before using the car sound system.
• Keep the instructions at a location so that they
are always accessible to all users.
• Always pass on the car sound system to third
parties together with these instructions.
In addition, observe the instructions of the devices
used in conjunction with this car sound system.
Symbols used
These instructions employ the following symbols:
DANGER!
Warns about injuries
CAUTION!
Warns about damaging the CD drive
DANGER!
Warns about high volume
The CE mark con rms the compliance
with EU directives.
쏅Identi es a sequencing step
• Identi es a listing
Road safety
Observe the following notes about road safety:
• Use your device in such a way that you can
always safely control your vehicle. In case of
doubt, stop at a suitable location and operate
your device while the vehicle is standing.
• Remove or attach the control panel only
while the vehicle is standing.
• Always listen at a moderate volume to pro-
tect your hearing and to be able to hear acous-
tic warning signals (e.g. police sirens). During
mute phases (e.g. when changing the audio
source), changing the volume is not audible.
Do not increase the volume during this mute
phase.
General safety notes
Observe the following notes to protect yourself
against injuries:
• Do not modify or open the device. The device
contains a Class 1 laser that can cause injuries
to your eyes.
• Do not increase the volume during mute
phases, e.g. when changing the audio source.
Changing the volume is not audible during a
mute phase. Do not increase the volume dur-
ing mute phases, e.g. when changing the audio
source.
Use as directed
This car sound system is intended for installation
and operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN slot.
Observe the performance limits in the technical
data. Repairs and installation, if necessary, should
be performed by a specialist.
Installation instructions
You may only install the car sound system your-
self if you are experienced in installing car sound
systems and are very familiar with the electrical
system of the vehicle. For this purpose, observe
the installation instructions at the end of these
instructions.
Safety notes
5
Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation
Declaration of conformity
The Blaupunkt AudioVision GmbH & Co. KG de-
clares that the car sound system Frankfurt 320
complies with the basic requirements and the oth-
er relevant regulations of the directive 2004/108/
EEC and the car sound system Hamburg 420 BT
complies with the basic requirements and the oth-
er relevant regulations of the directive 1999/5/EC.
The declaration of conformity can be found on the
Internet under www.blaupunkt.com.
Cleaning notes
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the car sound system.
• Use only a dry or slightly moistened cloth for
cleaning the car sound system.
• If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened
with cleaning alcohol.
Disposal notes
Do not dispose of your old unit in the house-
hold trash!
Use the return and collection systems available to
dispose of the old device.
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Operating/installation instructions
1 Case for the control panel
1 Support frame
1 Antenna connection adapter
Extended scope of delivery
(for 1011202323 / 1011202423 only):
1 Handheld remote control (incl. battery)
1 Connecting cable chamber A
1 Connecting cable chamber B
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by Blaupunkt.
Information is available from your Blaupunkt
specialised dealer or on the Internet under
www.blaupunkt.com.
Placing the device in operation
Caution!
Transport securing screws
Before the startup of the car sound system, ensure
that the transport securing screws are removed
(see the chapter "Installation instructions").
Attaching/detaching the control
panel
The car sound system is equipped with a detach-
able control panel (release panel) to protect your
equipment against theft. In the delivery state, the
control panel is in the supplied case. To start oper-
ating the radio after installation, you must rst at-
tach the control panel (see the section "Attaching
the control panel" in this chapter).
Always take the control panel with you when leav-
ing the vehicle. The car sound system is worthless
to a thief without this control panel.
Caution
Damage to the control panel
Never drop the control panel.
Transport the control panel so that it is protected
against impacts and the contacts cannot become
dirty.
Do not expose the control panel to direct sunlight
or another heat source.
Avoid direct skin contact with the control panel's
electrical contacts.
6
Placing the device in operation
Attaching the control panel
쏅Push the control panel into the bracket at the
right edge of the device.
쏅Push the control panel carefully into the left
bracket until it clicks into place.
Removing the control panel
쏅Press the button
1
to unlock the control
panel.
The left side of the control panel detaches
from the device and is secured by the bracket
against falling out.
쏅Move the control panel slightly to the left until
it disengages from the right bracket.
쏅Carefully remove the control panel from the
left bracket.
Note:
The car sound system automatically switches
o as soon as the control panel is removed.
Display language
(only Hamburg 420 BT)
For the Hamburg 420 BT, you can de ne whether
the language for messages on the display is Eng-
lish or German. The setting is performed in the user
menu (see the chapter "User settings", section "Mak-
ing settings in the "DISPLAY" menu", menu item
" LANGUAGE").
Setting the reception area
This car sound system is designed for operation in
di erent regions with di erent frequency ranges
and station technologies. The factory default of
the reception area is "EUROPE". In addition, the
reception areas "USA", "SOUTH AMERICA" and
" THAILAND" are available.
Note:
If you operate the car sound system outside of
Europe, you may rst have to set a suitable re-
ception area in the user menu (see the chapter
"User settings", section "Making settings in the
"TUNER" menu", menu item "TUNER AREA").
Switching on/o
Switching on/o with the On/O button
쏅For switch-on, press the On/O button
3
.
The car sound system switches on.
쏅To switch o the device, press and hold down
the On/O button
3
for longer than 2 sec-
onds.
The car sound system switches o .
Note:
If you switch on the car sound system while
the vehicle ignition is switched o , it auto-
matically switches o after 1 hour to preserve
the vehicle battery.
Switching on/o via vehicle ignition
The car sound system will switch o /on simulta-
neously with the ignition if the device is correctly
connected to the vehicle's ignition as shown in the
installation instructions and you did not switch
the device o by pressing the On/O button
3
.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o ) to
50 (maximum).
쏅Turn the volume control
4
to change the
volume.
Note:
If a telephone or navigation system is con-
nected with the car sound system as de-
scribed in the installation instructions (pin
2 of chamber A), the car sound system is
muted in case of a telephone call or naviga-
tion announcement so that you can hear the
playback of the telephone or navigation sys-
tem undisturbed. During muting, the display
shows "TELEPHONE".
Muting the car sound system (Mute)
쏅Brie y press the On/O button
3
to mute
the car sound system or to reactivate the pre-
vious volume.
While it is muted, the display shows "MUTE".
7
Placing the device in operation | Tra c information | Radio mode
Display brightness
You can manually switch the display brightness
between daytime mode and night-time mode or
switch automatically with the driving lights of the
vehicle.
Note:
The manual or automatic switching of the
display brightness is selected in the user
menu (see the chapter "User settings",
section "Making settings in the "DISPLAY"
menu", menu item "DIMMER").
쏅Press the DIS button
A
for approx. 2 seconds
to start scanning.
Switching demo mode on/o
The demo mode shows the functions of the car
sound system as scrolling text on the display. By
pressing any button, the demo mode is interrupt-
ed and you can operate the device.
The demo mode can be switched on and o in the
user menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "DEMO MODE").
Tra c information
In the reception area "EUROPE", an FM station can
identify tra c reports by means of an RDS signal.
If priority for tra c reports is switched on, a traf-
c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
tra c jam symbol ( ). "TRAFFIC" is displayed
during a switched-through tra c announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TRAFFICINFO").
Notes:
• The volume is increased for the duration
of the switched-through tra c announce-
ment. You can adjust the minimum volume
for tra c announcements (see the chapter
"User settings", section "Making settings in
the "VOLUME" menu", menu item "TRAFFIC
VOL").
• To cancel a switched-through tra c an-
nouncement, press the SRCbutton
@
.
Radio mode
RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme in
the reception area "EUROPE" that allows the follow-
ing additional functions:
• The station name is shown on the display.
• The car sound system recognises tra c an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e.g. in CD mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
• Regional: At certain times, some radio stations
divide their programme into regional pro-
grammes providing di erent content. If the
REGIONAL function is activated, the car sound
system changes only to those alternate frequen-
cies on which the same regional programme is
being broadcast.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chap-
ter "User settings", section "Making settings
in the "TUNER" menu", menu items "RDS" and
" REGIONAL").
Note:
If you adjust a di erent reception area than
"EUROPE", RDS is automatically switched o .
The station name continues to be shown on
the display. If you want to use radio stations
with RDS features in your region, switch on
RDS in the user menu.
8
Radio mode
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the
di erent reception areas:
Region Memory banks
EUROPE FM1, FM2, FMT, MW, LW
USA FM1, FM2, FMT, AM, AMT
SOUTH AMERICA FM1, FM2, FMT, AM, AMT
THAILAND FM1, FM2, FMT, AM, AMT
쏅Press the SRCbutton
@
repeatedly until the
desired memory bank is displayed.
Notes:
• Up to 5 stations can be stored in each
memory bank.
• You can disable certain memory banks
that you do not want to use (see chapter
"User settings", section "Making settings
in the "TUNER" menu", menu item "BAND
SELECTION"). Deactivated memory banks
are skipped during the source selection
with the SRCbutton
@
.
Tuning into a station
There are various ways of tuning into a station:
Starting station seek tuning
쏅Turn rotary control
7
one notch counter-
clockwise or clockwise to start station seek
tuning.
The display brie y shows "SEARCH AUTO".
The radio tunes into the next receivable sta-
tion.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation ( ) is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENSITIVITY").
Tuning into stations manually
쏅Press the rotary button
7
once to activate
manual station tuning.
The display brie y shows "SEARCH MANUAL".
쏅Turn the rotary control
7
to change the fre-
quency in increments.
Note:
The manual station tuning is automatically
exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is
started by turning the rotary control
7
.
Storing stations or calling stored
stations
쏅Select the desired memory bank.
쏅If necessary, set the desired station.
쏅Press the station button 1 - 5
>
for approx.
2 seconds to store the current station under
the button.
- or -
쏅Brie y press the station button 1 - 5
>
to call
up the stored station.
Scanning stations
With the scan function, you can scan either every
receivable station or every stored station of the
current waveband.
Note:
You can adjust the scan time for each station
(see the chapter "User settings", section "Mak-
ing settings in the "VARIOUS" menu", menu
item "SCAN TIME").
Scanning all receivable stations of the
waveband
쏅Press the MENU button
2
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅Brie y press the MENU button
2
to con-
tinue listening to the station that is currently
being scanned.
9
Radio mode
Scanning all stored stations of the waveband
쏅Press the rotary control
7
for approx. 2 sec-
onds to start the scanning.
During the scan, the display alternately dis-
plays the current frequency as well as memo-
ry bank and location or station name.
쏅Brie y press the rotary control
7
to continue
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations o ering the strongest
reception in the region in one memory bank. Any
previously stored stations in this memory bank are
deleted in the process.
With Travelstore, you can store 5 FM stations in
the FMT memory bank in all reception areas. In
the reception areas "USA", "SOUTH AMERICA" and
"THAILAND", you can also store 5 AM stations in
the AMT memory bank.
쏅Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
쏅Press the SRCbutton
@
for approx. 2 sec-
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
• For the reception area "EUROPE": If the
priority for tra c information is switched
on ( ), only tra c information stations
are stored.
• If the FMT or AMT memory bank is deac-
tivated (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "BAND SELECTION"), it
is automatically reactivated if you initiate
the Travelstore function.
PTY
In the reception areas "EUROPE" and "USA", an FM
station can transmit its current programme type,
e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE.
Hence, the PTY function allows a targeted search
for broadcasts of a certain programme type, e.g.
for rock or sports broadcasts. Note that PTY is not
supported by all stations.
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu",
menu item "PTY").
Selecting a programme type
To select a programme type. read the section
"Making settings in the "TUNER" menu", menu
item "PTY TYPES" in the chapter "User settings".
Note:
In the reception area "EUROPE", you can adjust
the language in which the programme types
are displayed (see the chapter "User settings",
section "Making settings in the " TUNER"
menu", menu item "PTY LANGUAGE").
Searching for stations
Prerequisite: PTY function is switched on.
쏅Press the rotary control
7
twice.
The display brie y shows "SEARCH PTY".
쏅Turn rotary control
7
one notch counter-
clockwise or clockwise to start the PTY seek
tuning.
During the seek tuning, "SEARCH" and the
currently selected programme type are
shown on the display.
As soon as a station with the desired pro-
gramme type is found, it remains being tuned
into.
Notes:
• If no station with the selected programme
type is found, "NO PTY" is brie y displayed
and 2 beeps can be heard. The radio will
then retune to the station that it played
last.
10
• If the tuned radio station or another sta-
tion on the broadcasting network broad-
casts your selected programme type at a
later point in time, the car sound system
will automatically switch from the cur-
rently tuned station or from the current
audio source (e.g. CD) to the station whose
programme type matches the one you se-
lected. Note that this function is not sup-
ported by all stations.
Con guring the display
쏅Press the DIS button
A
to toggle between
these displays:
Display Meaning
ABCDEF Station name
FM1 P1 89.90 Memory bank/memory
location/frequency
FM1 P1 08:40 Memory bank/memory
location/time
CD/MP3/WMA/iPod mode
Basic information
CD/MP3/WMA mode
This car sound system can be used to play audio
CDs (CDDA) and CD-R/RWs with audio, MP3 or
WMA les as well as MP3 or WMA les on USB data
carriers and SD(HC)/MMC memory cards.
Notes:
• To ensure proper functioning, use only CDs
with the Compact-Disc logo.
• Blaupunkt cannot guarantee the awless
function of copy-protected CDs and all
CD blanks, USB data carriers and memory
cards available on the market.
Note the following information when preparing
an MP3/WMA data carrier:
• Naming of tracks and directories:
– Max. 32 characters without the le exten-
sion ".mp3" or ".wma" (the use of more
characters reduces the number of tracks
and folders that the car sound system can
recognise)
– No umlauts or special characters
• CD formats: audio CD (CDDA), CD-R/RW,
Ø: 12 cm
• CD data formats: ISO 9669 Level 1 and 2, Joliet
• CD burn speed: Max. 16x (recommended)
• USB format/ le system: Mass storage device/
FAT16/32
• Memory card le system: FAT16/32
• File extension of audio les:
– .MP3 for MP3 les
– .WMA for WMA les
•WMA les only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
• MP3 ID3 tags: Version 1 and 2
• Bitrate for creating audio les:
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps
• Maximum number of les and directories: Up
to 30,000 les/500 directories depending on
the data structure
iPod mode
You can connect numerous iPod and iPhone mod-
els to the car sound system via the USB port in the
front of the device and the USB port at the rear
and control the audio playback from the car sound
system.
Notes:
• Blaupunkt cannot guarantee the awless
function of all iPod and iPhone models.
• If an iPhone and iPod are connected at the
same time, the devices are charged via the
USB ports. If two iPhones are connected at
the same time, charging is not possible.
Use a suitable adapter cable to connect your iPod
or iPhone with the USB port of the car sound sys-
tem.
Radio mode | CD/MP3/WMA/iPod mode
11
Changing to CD/MP3/WMA/iPod
mode
쏅Press the SRCbutton
@
repeatedly until the
desired audio source is displayed:
• "CD": Inserted CD.
• "SD(HC)": Inserted memory card
• "USB FRONT" or "USB REAR": USB data
carrier connected to the front or rear.
• "IPOD FRONT" or "IPOD REAR": iPod con-
nected to the front or rear
• "AUX": Connected external audio source.
Notes:
• The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device is connected.
• A connected iPod is initially selected un-
der "USB" and, as soon as the iPod is recog-
nised, under "IPOD".
• If the car sound system rst has to read
the data of a connected device or data car-
rier before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design
of the device or data carrier. If the device
or data carrier is defective or the trans-
ferred data cannot be played back, a corre-
sponding message appears on the display
(e.g. "CD ERROR").
Inserting/ejecting a CD
Inserting a CD
Risk of severe damage to the CD
drive!
Noncircular contoured CDs (shape CDs)
and CDs with a diameter of 8 cm (mini CDs) must
not be used.
We accept no responsibility for any damage to the
CD drive that may occur as a result of the use of
unsuitable CDs.
Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
쏅Insert the CD with its printed side up into the
CD tray
5
until you feel a slight resistance.
The drive automatically draws in the CD and
checks its data. Afterwards, the playback
starts in CD or MP3 mode.
Note:
If the inserted CD cannot be played back, "CD
ERROR" is brie y displayed and the CD is au-
tomatically ejected after approx. 2 seconds.
Ejecting a CD
Note:
You must not hinder or assist the drive as it
ejects the CD.
쏅Press the button
8
to eject an inserted
CD.
Notes:
• If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
• You can also eject CDs while the car sound
system is switched o or whilst another au-
dio source is activated.
Connecting/removing a USB data
carrier
Note:
You can connect USB data carriers to the USB
port at the front of the device as well as the
rear USB port.
Connecting a USB data carrier
쏅Switch o the car sound system so that the
data carrier will be correctly registered.
쏅First, pull the protective cap of the USB port
:
to the front until it moves out of the port
and fold it to the right to connect a data car-
rier to the USB port at the front of the device.
쏅Connect the USB data carrier.
쏅Turn on the car sound system.
CD/MP3/WMA/iPod mode
12
If the USB data carrier is initially selected as
audio source, the data are read rst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is brie y displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
쏅Switch o the car sound system so that the
data carrier will be correctly unregistered.
쏅Disconnect the USB data carrier.
쏅After you pulled o the data carrier from the
USB port at the front of the device, close the
protective cap of the USB port
:
.
Inserting/removing the memory card
Inserting the memory card
쏅Detach the control panel.
쏅Insert the memory card with its labelled side
up and its contacts rst into the card slot
B
until it clicks into place.
쏅Attach the control panel.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in
MP3 mode.
Notes:
• If the inserted memory card cannot be
played, "SD ERROR" is brie y displayed.
• The time required for reading the card
depends on the design and size of the
memory card.
Removing the memory card
쏅Detach the control panel.
쏅Push on the memory card until it disengages.
쏅Pull the memory card out of the card slot
B
.
쏅Attach the control panel.
Selecting tracks
쏅Turn rotary control
7
one notch counter-
clockwise or clockwise to change to the pre-
vious/next track.
Notes:
• If you turn rotary control
7
several
notches counter-clockwise or clockwise,
you jump forward or reverse by the corre-
sponding number of tracks.
• If the current track plays longer than 3
seconds and you turn rotary control
7
by
one notch counter-clockwise or clockwise,
the tracks starts playing again.
Fast searching
쏅Press the rotary control
7
once.
The display brie y shows "CUE/REVIEW".
쏅Turn the rotary control
7
until the desired
position has been reached.
Note:
If you press the rotary control
7
twice, the
display brie y shows "TRACK SELECT". By
turning the rotary control
7
, you select a
di erent track.
Interrupting playback
쏅Press the 3 button
>
to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
쏅Press the rotary control
7
for approx. 2 sec-
onds to start the scan, or brie y to continue
playing the currently scanned track.
During the scan, the display alternately dis-
plays "SCAN" and the current track number
or le name.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
CD/MP3/WMA/iPod mode
13
Playing tracks in random order
쏅Press the 5 MIX button
>
to change among
the playback modes:
Opera-
tion
Display Meaning
CD/
iPod MIX ALL Mixing tracks
MP3/
WMA
MIX FOLDER Mixing tracks of
the current folder
MIX ALL Mixing tracks of
the data carrier
Gen. MIX OFF Regular playback
If the MIX function is switched on, the icon
MIX (mix all tracks) or MIX (mix tracks of
current folder) is shown on the display.
Repeatedly playing individual tracks
or directories
쏅Press the 4 RPT button
>
to change among
the playback modes:
Opera-
tion
Display Meaning
CD/
iPod REPEAT TRACK Repeating
tracks
MP3/
WMA
REPEAT TRACK Repeating
tracks
REPEAT FOLDER Repeating
folders
Gen. REPEAT OFF Regular
playback
If the REPEAT function is switched on, the icon
(repeat tracks) or (repeat
folders) is shown on the display.
Con guring the display
쏅Press the DIS button
A
once or several times
to toggle between these displays:
Opera-
tion
Display / icon Meaning
CD
TRACK 01 00:15
Track num-
ber and play-
ing time
TRACK 01 03:37
Track
number and
duration
TRACK 01 08:40
Track
number and
time
MP3/
WMA/
iPod
ABCDEF / File name ²
ABCDEF / Track name¹
ABCDEF / Artist¹
ABCDEF / Album ¹
ABCDEF / Genre ³
PLAY TIME 00:15 Playing time
TOTAL TIME 03:37 Track dura-
tion
ALL INFO / All informa-
tion as scroll-
ing text
¹ Track name, artist and album name must be
stored as ID3 tag to be able to display them.
² The le name is displayed only in MP3/WMA
mode.
³ The genre information is available only on
iPod mode.
Note:
With every track change, the le name is
brie y shown in MP3/WMA mode and the
track name in iPod mode before the display
switches to the de ned display.
CD/MP3/WMA/iPod mode
14
CD/MP3/WMA/iPod mode
Browse mode
In Browse mode, you can directly search for and
select a certain track on the MP3/WMA data carrier
or iPod without interrupting the current playback.
Browse mode in MP3/WMA mode
In MP3/WMA mode, you can select and play a
track from a directory of the data carrier.
쏅Brie y press the 1LIST button
>
to call up
the browse mode in MP3/WMA mode.
The display shows the icon. The
rst or current folder on the data carrier and
the icon are displayed.
Notes:
• The rst folder is displayed only if the
browse mode has been called for the rst
time after inserting or connecting the data
carrier. Afterwards, the current folder is
displayed whenever the browse mode is
called.
• The browse mode remains switched on for
5 minutes without con rming a selection.
• You can exit the browse mode at any time
by pressing the 1LISTbutton
>
.
쏅Turn the rotary control
7
to select a di er-
ent folder.
쏅Press the rotary control
7
to display the
tracks of the selected folder.
The rst track of the folder and the icon are
shown on the display.
Note:
To return to the folder list, turn the rotary con-
trol
7
until the "<<<" option is selected and
press the rotary control
7
.
쏅Turn the rotary control
7
to select a di er-
ent track.
쏅Press the rotary control
7
to play the track.
The playback starts. You are exiting the
browse mode.
Browse mode in iPod mode
In iPod mode, you can select and play the tracks
via the categories "ARTISTS", "ALBUMS", "GENRES"
or "PLAYLISTS".
쏅Press the 2 ID3 button
>
to call up the
Browse mode in the iPod mode.
The display shows the icon. The
rst category, "ARTISTS", is displayed.
Notes:
• Press the 2 ID3 button
>
for approx.
2 seconds to directly call up the "PLAYLISTS"
category.
• The browse mode remains switched on for
5 minutes without con rming a selection.
• You can exit the browse mode at any time
by pressing the 2 ID3 button
>
.
쏅Turn the rotary control
7
to select the
category "ALBUMS" , "GENRES"
or "PLAYLISTS" .
쏅Press the rotary control
7
to display the
available folders of the category.
The rst folder of the selected category is
shown on the display (e.g. "JAZZ" in the
" GENRES" category).
Note:
To return to the list of categories, turn the
rotary control
7
until the "<<<" option is
selected and press the rotary control
7
.
쏅Turn the rotary control
7
to select a di er-
ent folder.
쏅Press the rotary control
7
to display the
available tracks of the folder.
The rst track of the folder is shown on the
display.
Note:
To return to the folder list, turn the rotary con-
trol
7
until the "<<<" option is selected and
press the rotary control
7
.
쏅Turn the rotary control
7
to select a di er-
ent track.
15
CD/MP3/WMA/iPod mode | Bluetooth®
쏅Press the rotary control
7
to play the track.
The playback starts. You are exiting the
browse mode.
Searching by track names
(not in iPod mode)
On MP3/WMA data carriers, you can nd a track
based on its le name and start the playback.
쏅Press the 1 LIST button
>
for approx. 2 sec-
onds to start the search function.
You can now enter a le name with up to
16 characters:
Notes:
• You do not have to enter the complete le
name. You can enter only the rst charac-
ters of the le name and select the desired
track from the list of tracks found.
• You can exit the search function at any
time by brie y pressing the 1 LIST button
>
.
쏅Turn the rotary control
7
to select a charac-
ter for the respective position.
쏅Press the rotary control
7
to go to the next
position.
쏅Press the 1 LIST button
>
for approx. 2 sec-
onds to start the search.
All tracks corresponding to the le name en-
tered are listed.
쏅If necessary, turn the rotary control
7
to
select a track.
쏅Press the rotary control
7
to start the play-
back.
Bluetooth®
(Hamburg 420 BT only)
You can connect the Hamburg 420 BT via Blue-
tooth® with other Bluetooth®-ready devices, such
as cell phones or MP3 players. This allows you to
use the car sound system with its integrated mi-
crophone as hands-free system for connected
cell phones and control the audio output of other
Bluetooth® devices and play them back via the
loudspeakers of the car sound system (Bluetooth®
streaming).
Note:
You can also connect an external microphone
for hands-free calling (see the chapter "Instal-
lation instructions").
Bluetooth® technology is a wireless connection of
short range. For this reason, Bluetooth® devices
must be located near the car sound system (in the
vehicle) to establish and maintain a connection.
To establish a Bluetooth® connection, you must
rst pair the car sound system and the Bluetooth®
device. When you pair the devices, a Bluetooth®
connection is subsequently established automati-
cally. This connection remains in e ect as long as
the Bluetooth® device is within range. If the con-
nection is interrupted, e.g. because you moved
the cell phone outside the range, the connection
is automatically re-established as soon as you are
back within range.
You can connect only one cell phone and stream-
ing device with the car sound system at a time.
If you connect a new device with the car sound
system, the connection to a currently connected
device may automatically be interrupted. How-
ever, the car sound system leaves up to 5 di erent
Bluetooth® devices paired, and you can quickly
and easily connect any of these devices with the
car sound system again.
Bluetooth® menu
In the Bluetooth® menu, you nd all the functions
for pairing, connecting and managing Bluetooth®
devices.
16
Calling the Bluetooth® menu
쏅Brie y press the MENU
2
button to open
the user menu.
쏅Turn the rotary control
7
until the "BLUE-
TOOTH" menu item is selected.
쏅Press the rotary control
7
to open the Blue-
tooth® menu.
쏅Turn the rotary control
7
until the desired
menu item is selected.
쏅Perform the setting (see the following sec-
tions).
쏅Brie y press the MENU button
2
to exit the
menu.
Notes:
• The Bluetooth® menu is automatically ex-
ited approx. 60 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
• To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
• If a Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you at-
tempt to open the Bluetooth® menu dur-
ing this time, "LINK BUSY" brie y appears
on the display. If you want to cancel the
Bluetooth® process and open the Blue-
tooth® menu, press the button
<
.
Pairing and connecting a device
Note:
You can pair up to 5 Bluetooth® devices with
this car sound system. Before you can pair a
sixth device, you must rst unpair one of the
5 already paired devices (see ch. "Additional
functions in the Bluetooth® menu", section
"Managing paired devices").
If you should attempt to pair a sixth Blue-
tooth® device, "PHONE LIST FULL – PLEASE
DELETE ENTRIES FROM LIST" is displayed.
Pairing and connecting a cell phone
Note:
If a connection with a cell phone currently ex-
ists, this connection is automatically discon-
nected if you pair and connect another cell
phone.
쏅In the Bluetooth® menu, select the "PAIRING"
menu item.
쏅Press the rotary control
7
to open the menu.
The "MOBILE PHONE" menu item is selected.
쏅Press the rotary control
7
to register a cell
phone.
The display shows "PAIRING" and the Blue-
tooth® symbol is ashing. The car sound
system can now be recognised by a Blue-
tooth® cell phone for approx. 2 minutes and
connected.
쏅Search the car sound system from your cell
phone (Bluetooth® name: "BP 420 BT").
As soon as the car sound system is located
by the cell phone and is to be connected, the
display brie y shows "ENTER PIN" and the cur-
rently stored PIN (by default "1234").
쏅Establish the connection from your cell
phone. Enter the PIN displayed by the car
sound system.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the cell phone are paired and con-
nected.
Notes:
If no connection can be established, the dis-
play brie y shows "CONNECT FAILED".
Pairing and connecting a Bluetooth®
streaming device
Note:
If a connection with a streaming device cur-
rently exists, this connection is automatically
disconnected if you pair and connect another
streaming device.
Bluetooth®
17
쏅In the Bluetooth® menu, select the "PAIRING"
menu item.
쏅Press the rotary control
7
to open the menu.
The "MOBILE PHONE" menu item is selected.
쏅Turn the rotary control
7
to select the
"STREAMING" menu item.
쏅Press the rotary control
7
to register a
streaming device.
The display shows the currently stored
PIN (default "1234"). If required, enter the
PIN of the streaming device:
쏅Turn the rotary control
7
to select a digit for
the respective position.
쏅Press the rotary control
7
to go to the next
position.
Notes:
• To return to the previous position for the
PIN entry, turn the rotary control
7
until
the "<<<" option is selected, and press the
rotary control
7
.
• Not all streaming devices require the entry
of a PIN on the car sound system. For some
streaming devices, you have to enter the
PIN of the car sound system instead. For
these devices, press only the rotary control
7
repeatedly until you reach beyond the
last position, thereby con rming the cur-
rent PIN, and then enter this PIN on the
streaming device.
The display shows "PAIRING" and the Blue-
tooth® symbol is ashing. The car sound sys-
tem can now be recognised by the streaming
device for approx. 2 minutes and connected.
쏅Search the car sound system from your stream-
ing device (Bluetooth® name: "BP 420 BT") and
establish the connection. Enter the PIN of the
car sound system, if necessary.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are paired and
connected.
Notes:
• If no connection can be established, the
display brie y shows "CONNECT FAILED".
• After switch-on, the car sound system
automatically attempts to reconnect the
device connected last. If the connection
attempt fails, the display brie y shows
"CONNECTION LOST". If necessary, attempt
to re-establish the connection from the
streaming device.
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "INCOMING CALL" and the number of the
caller. The current audio source is muted and a
ring tone is played via the loudspeakers of the car
sound system.
Note:
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE NUM-
BER" instead of the number. If the number
of the caller is stored together with a name,
the name of the entry and the number are
displayed (see the section "Storing a phone
number in the car sound system" in this chap-
ter).
쏅Press the button
=
to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
쏅Press the
<
button to reject the call or
to end the current call.
The display shows "CALL END".
Notes:
• During the call, you can adjust the volume
with the volume control
4
or mute the
device with a short press of the On/O
button
3
.
• You can adjust the volume for the call play-
back in the user menu (see the chapter
"User settings", section "Making settings in
the "VOLUME" menu", menu item "HANDS-
FREE VOL").
Bluetooth®
18
Making a call
쏅In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
쏅Press the rotary control
7
to open the entry
menu.
You can now enter a phone number with up
to 20 digits:
쏅Turn the rotary control
7
to select a digit for
the respective position.
쏅Press the rotary control
7
to go to the next
position.
Note:
To return to the previous position in the en-
try menu, turn the rotary control
7
until the
"<<<" option is selected, and press the rotary
control
7
.
쏅Press the button
=
to call the number
entered.
"CALLING" and the dialed number are alter-
nately shown on the display.
As soon as your calling party answers the call,
the display shows "CALL" and the time of the
current phone call.
Upon ending the call, the display brie y
shows "CALL END".
Calling an entry in the phone book
Note:
This function is available only if the phone
book of the connected cell phone was trans-
ferred to the car sound system (see the chap-
ter "Phone book functions").
쏅In the Bluetooth® menu, select the "PHONE-
BOOK" menu item.
쏅Press the rotary control
7
to open the phone
book.
The display shows the rst phone book entry.
Note:
If the phone book has not yet been trans-
ferred, the display brie y shows "PHONE-
BOOK NOT AVAILABLE".
쏅Turn the rotary control
7
to select a di er-
ent entry.
쏅Press the rotary control
7
or the but-
ton
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Note:
You can also call an entry in the phone book
via speed dial (see the section "Speed dial for
phone book entries" in this chapter).
Making a call with voice dial
Note:
This function is only available if the connected
cell phone supports voice dial.
쏅In the Bluetooth® menu, select the "VOICE
DIAL" menu item.
쏅Press the rotary control
7
or the but-
ton
=
to activate voice recognition.
The car sound system is muted and the dis-
play shows "SPEAK NOW".
쏅Say the name of the desired calling partner.
Notes:
• If no Bluetooth® connection is established
when voice recognition is activated,
the display brie y shows "VOICE DIAL
FAILED – NO BT CONNECTION".
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display brie y shows
"DIAL FAILED".
• You can cancel the voice recognition by
pressing the button
<
.
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
• You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
Bluetooth®
19
Storing a phone number in the car sound
system
You can store phone numbers in the car sound
system and make calls using the speed dial (see
the following section).
A phone number is stored for the currently con-
nected telephone and is available only for this tel-
ephone. The car sound system can store up to ve
numbers for up to ve paired devices.
쏅Enter the phone number as described in the
section "Making a call".
쏅Press the desired memory button 1-5
>
for
approx. 2 seconds to store only the number.
- or -
쏅Press the rotary control
7
for approx. 2 sec-
onds to enter a name for the entry.
You can now enter a name with up to 15 char-
acters:
쏅Turn the rotary control
7
to select a charac-
ter for the respective position.
쏅Press the rotary control
7
to go to the next
position.
Note:
To return to the previous position in the en-
try menu, turn the rotary control
7
until the
"<<<" option is selected, and press the rotary
control
7
.
쏅Press the desired memory button
1 - 5
>
for approx. 2 seconds to store the
number and name.
The display brie y shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Notes:
• A number previously stored on the memo-
ry button is replaced.
• If a telephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without rst
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
쏅press the button
=
.
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
쏅Press the button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
To call a stored number,
쏅press the button
=
.
쏅Press a memory button 1 - 5
>
to call the
number stored.
Note:
If no number is stored under the selected
memory button, the display brie y shows
"NO NUMBER".
쏅Press the button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
To call any number,
쏅press the button
=
.
쏅Press the On/O button
3
to open the entry
menu and enter a number (enter the phone
number as described in the section "Making
a call").
쏅Press the button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Bluetooth®
20
Speed dial for phone book entries
Note:
This function is only available
• if the phone book of the connected cell
phone was transferred to the car sound
system (see the chapter "Phone book func-
tions").
• if the speed dial is set for phone book en-
tries (see the chapter "Additional functions
in the Bluetooth® menu", section "Setting
the button function for speed dial").
To select an entry of the phone book with the
speed dial and call it,
쏅press the button
=
for approx. 2 sec-
onds.
The display shows the rst phone book entry.
쏅If necessary, select another entry as described
in the section "Calling an entry in the phone
book".
쏅Press the button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Speed dial for voice dial
Note:
This function is only available
• if the connected cell phone supports voice
dial.
• if the speed dial is set for voice dial (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Setting the button
function for speed dial").
To activate the voice recognition with the speed
dial,
쏅press the button
=
for approx. 2 sec-
onds.
The car sound system is muted and the dis-
play shows "SPEAK NOW".
쏅Say the name of the desired calling partner.
Bluetooth® streaming mode
Starting the Bluetooth® streaming mode
쏅Press the SRC
@
button repeatedly until
"BT-STREAM" appears on the display.
The playback starts.
Notes:
• The Bluetooth® streaming mode can be se-
lected only if a suitable streaming device
is connected.
• If the connection to the streaming device
is lost during playback, the display brie y
shows "CONNECTION LOST" and the car
sound system changes to the previous au-
dio source.
Selecting tracks
쏅Turn rotary control
7
one notch counter-
clockwise or clockwise to change to the pre-
vious/next track.
Interrupting playback
쏅Press the 3 button
>
to interrupt the
playback ("PAUSE") or to continue it.
Phone book functions
Transferring the phone book of the cell phone
to the car sound system
You can transfer the phone book of the connected
cell phone to the car sound system to call entries
of the phone book using the car sound system.
Notes:
• The car sound system accepts only entries
from the memory of the telephone and
not from the SIM card inserted in the tel-
ephone.
• The transfer does not delete the phone
book from the cell phone.
The car sound system can store the phone books
of the paired telephones with a total of up to 960
entries. If several numbers are stored on the tel-
ephone for one contact (e.g. landline, cell phone
number, o ce number and similar), each number
is stored as a separate entry by the car sound sys-
tem.
Bluetooth®
21
Each entry consists of a name and a number, each
up to 20 characters on digits.
Note:
Do not switch o the car sound system while
transferring the phone book. If you do or if the
power supply of the car sound system should
be interrupted for any reason, you have to re-
start the transfer.
쏅In the Bluetooth® menu, select the "DOWN-
LOAD P–BOOK" menu item.
쏅Press the rotary control
7
.
The display shows "CONFIRM".
쏅Press the rotary control
7
again.
"PHONEBOOK DOWNLOADING – PLEASE
WAIT" appears on the display.
After the download is complete, the display
brie y shows "DOWNLD COMPLETE".
Notes:
• To cancel the transfer, press the but-
ton
<
.
• If the transfer of the phone book fails,
the display brie y shows "DOWNLOAD
FAILED".
• If the transfer of the phone book exceeds
the storage capacity of the car sound sys-
tem, the display brie y shows "PHONE-
BOOK FULL". The phone book entries trans-
ferred so far remain stored.
• If you supplemented or changed entries
on your cell phone since the last transfer,
you can update the phone book on the car
sound system by transferring it again. If the
storage capacity of the car sound system
is exceeded in the process, rst delete the
already transferred phone book (see the
next section) or unpair another cell phone,
if necessary, so that its phone book is also
deleted from the car sound system (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Managing paired
devices").
• If you insert a CD during an ongoing trans-
fer, the playback does not start until the
transfer is completed.
Deleting the phone book of the cell phone
from the car sound system
You can delete the phone book of the connected
cell phone.
Note:
The telephone remains connected.
쏅In the Bluetooth® menu, select the "DELETE
P–BOOK" menu item.
쏅Press the rotary control
7
.
The display shows "CONFIRM".
쏅Press the rotary control
7
again.
Additional functions in the
Bluetooth® menu
Changing the Bluetooth® PIN
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
쏅In the Bluetooth® menu, select the "PIN EDIT"
menu item.
쏅Press the rotary control
7
to open the entry
menu.
You can now enter the PIN:
쏅Turn the rotary control
7
to select a digit for
the respective position.
쏅Press the rotary control
7
to go to the next
position.
Note:
To return to the previous position in the
entry menu, turn the rotary control
7
until
the "<<<" option is selected, and press the
rotary control
7
.
Bluetooth®
22
Managing paired devices
In the Bluetooth® menu, you can manage the
paired Bluetooth® devices (cell phones and
streaming devices such as MP3 player).
In the device lists for cell phones and streaming
devices, the Bluetooth® names or addresses of the
paired devices are displayed. You can do the fol-
lowing:
• Disconnecting the connection to the currently
connected Bluetooth® device
• Establishing a connection to one of the paired
Bluetooth® devices
• Unpairing Bluetooth® devices
쏅In the Bluetooth® menu, select the menu item
"PHONE LIST" or "STREAMING LIST".
쏅Press the rotary control
7
to open the menu.
The rst device on the list is displayed.
Note:
If no device is paired, "EMPTY LIST" is brie y
displayed.
쏅Turn the rotary control
7
to select a di erent
device or the "DELETE ALL" option.
You have the following options:
To connect the displayed device,
쏅press the button
=
.
As soon as the device is connected, "CON-
NECTED" is brie y displayed and you are re-
turned to the Bluetooth® menu.
Note:
If no connection can be established, the
display brie y shows "CONNECT FAILED". If
the device is already connected, the display
brie y shows "CONNECT EXIST".
To disconnect the connection to the displayed
device,
쏅press the button
<
.
The display brie y shows "DISCONNECTED"
and you are returned to the Bluetooth® menu.
Note:
If the device was not connected, the display
brie y shows "NO CONNECTION".
To unpair the displayed device,
쏅press the button
<
for approx. 2 sec-
onds.
The display brie y shows "DELETED" and you
are returned to the Bluetooth® menu.
Note:
If a telephone is unpaired, the numbers stored
for this telephone and a phone book trans-
ferred from this cell phone are automatically
deleted.
To unpair all the cell phones or streaming devices,
쏅select the "DELETE ALL" menu item.
쏅Press the rotary control
7
.
The display shows "CONFIRM".
쏅Press the rotary control
7
or the but-
ton
=
again.
The display brie y shows "EMPTY LIST".
Setting the button function for speed dial
You can select whether the long press of the
button
=
opens the phone book or activates
voice dial.
쏅In the Bluetooth® menu, select the "SOFTKEY"
menu item.
Next to "SOFTKEY", the current "P–BOOK" set-
ting for phone book or "VOICE" for voice dial
is displayed.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
Bluetooth®
23
External audio sources
Front AUX-IN socket
Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
As soon as an external audio source, such as a
portable MP3 player is connected to the front
AUX-IN socket
;
, it can be selected with the SRC
button
@
. "AUX" then appears on the display.
Notes:
• You can enter an individual name for the
AUX source that is shown on the display in
AUX mode (see the chapter "User settings",
section "Making settings in the "VARIOUS"
menu", menu item "AUX EDIT").
• You can play back an AUX source at the
same time with one of the internal audio
sources of the car sound system. Hence,
you can play back the announcements of
a navigation device connected to the front
AUX-IN socket
;
via the loudspeakers of
the car sound system while listening to
the radio or a CD at the same time. In ad-
dition, you can adjust the volume levels of
both audio sources to each other. For more
details, please read the section "Making
settings in the "VARIOUS" menu", menu
items "AUX MIX" and "AUX MIX GAIN" in
the chapter "User settings".
Sound settings
The following sound settings can be changed in
the "AUDIO" menu:
• Adjusting bass and treble
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(Loudness)
• Selecting a sound pro le (Sound Preset)
• Setting level and frequency of the preampli er
output (Sub-Out)
• Setting the 3-band equaliser
• Adjusting the time delay for switching in an
external ampli er
Calling and exiting the "AUDIO"
menu
쏅Brie y press the MENU button
2
to open
the user menu.
쏅Turn the rotary control
7
until the "AUDIO"
menu item is selected.
쏅Press the rotary control
7
to open the
"AUDIO" menu.
쏅Turn the rotary control
7
until the desired
menu item is selected.
쏅Perform the setting (see the next section).
쏅Brie y press the MENU button
2
to exit the
menu.
Notes:
• The menu is automatically exited approx.
60 seconds after the last button activation
and you are returned to the display of the
current audio source.
• To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
External audio sources | Sound settings
24
Making settings in the "AUDIO" menu
BASS
Bass level. Settings: –7 to +7.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
until the desired
level is set.
쏅Press the rotary control
7
to con rm the
setting.
TREBLE
Treble. Settings: –7 to +7.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
until the desired
level is set.
쏅Press the rotary control
7
to con rm the
setting.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
until the desired
volume distribution is set.
쏅Press the rotary control
7
to con rm the
setting.
FADER
Front/rear volume distribution. Settings: R9 (rear)
to F9 (front).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
until the desired
volume distribution is set.
쏅Press the rotary control
7
to con rm the
setting.
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
PRESET EQ (sound pro le)
Selecting equalizer presettings. Settings: PRESET
EQ POP, PRESET EQ ROCK, PRESET EQ CLAS (clas-
sic), PRESET EQ OFF (sound pro le o ; no preset-
ting).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
SUB-OUT
Setting the level and frequency of the preampli-
er output.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 80/120/160 Hz)
– GAIN
(settings: 0 to +7)
쏅Press the rotary control
7
to change the
setting for the selected menu item.
쏅Turn the rotary control
7
to set the level or
frequency.
쏅Press the rotary control
7
to con rm the
setting.
Sound settings
25
AMP DELAY
Setting the delay with which a connect ampli er
is switched in. Settings: 0.5/1.0/1.5/2.0/2.5 seconds
and OFF (no delay).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
until the desired
delay is set.
쏅Press the rotary control
7
to con rm the
setting.
Setting the 3-band equaliser
The radio features a 3-band equaliser. For each of
the three treble, middle and bass bands, you can
select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass
and middle.
The equaliser also provides an adjustable increase
of the bass at low volume (X-bass).
Opening the "EQUALIZER" menu
쏅In the "AUDIO" menu, select the "EQUALIZER"
menu item.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the following menu items:
– EQUALIZER
– EQ TREBLE
– EQ MIDDLE
– EQ BASS
– EQ X-BASS
Note:
The submenus in the "EQUALIZER" menu are
not automatically exited after the last key has
been activated. After the setting, press the
MENU button
2
to exit the menu.
EQUALIZER
Switching the equalizer on or o . Settings: ON,
OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
EQ TREBLE
Adjusting treble frequency and level of the equal-
izer.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 10/12.5/15/17.5 kHz)
– GAIN
(settings: –7 to +7)
쏅Press the rotary control
7
to change the
setting for the selected menu item.
쏅Turn the rotary control
7
to set the level or
frequency.
쏅Press the rotary control
7
to con rm the
setting.
EQ MIDDLE
Adjusting centre frequency and level of the equal-
izer.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 0.5/1.0/1.5/2.5 kHz)
– GAIN
(settings: –7 to +7)
– Q-FACTOR
(settings: 0.5/0.75/1.0/1.25)
쏅Press the rotary control
7
to change the
setting for the selected menu item.
Sound settings
26
쏅Turn the rotary control
7
to set the level,
frequency or Q-factor.
쏅Press the rotary control
7
to con rm the
setting.
EQ BASS
Adjusting bass frequency and level of the equal-
izer.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 80/100/200 Hz)
– GAIN
(settings: –7 to +7)
– Q-FACTOR
(settings: 1.0/1.25/1.5/2.0)
쏅Press the rotary control
7
to change the
setting for the selected menu item.
쏅Turn the rotary control
7
to set the level,
frequency or Q-factor.
쏅Press the rotary control
7
to con rm the
setting.
EQ X-BASS
Adjusting the frequency and level for the increase
of bass at low volume.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 60/80/100 Hz)
– GAIN
(settings: 0 to +3)
쏅Press the rotary control
7
to change the
setting for the selected menu item.
쏅Turn the rotary control
7
to set the level or
frequency.
쏅Press the rotary control
7
to con rm the
setting.
User settings
Calling the user menu and selecting
a menu
쏅Brie y press the MENU
2
button to open
the user menu.
In the user menu, the user settings can be found in
the following menus:
• TUNER
• AUDIO (see chapter "Sound settings")
• DISPLAY
• VOLUME
• CLOCK
• VARIOUS
• BLUETOOTH (Hamburg 420 BT only, see the
chapter "Bluetooth®")
쏅Turn the rotary control
7
until the desired
menu is selected.
쏅Press the rotary control
7
to open the
selected menu.
쏅Turn the rotary control
7
until the desired
menu item is selected.
쏅Perform the setting (see the following
sections).
쏅Brie y press the MENU button
2
to exit the
menu.
Notes:
• The menu is automatically exited approx.
60 seconds after the last button activation
and you are returned to the display of the
current audio source.
• To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
Sound settings | User settings
27
Making settings in the "TUNER"
menu
TRAFFICINFO (tra c information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching prior-
ity for tra c announcements on or o . Settings:
ON, OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
If priority is switched on for tra c information, the
display shows the icon .
BAND SELECTION
Activating or deactivating memory banks.
Memory banks that can be deactivated:
Region Memory banks
EUROPE FM2, FMT, MW, LW
USA FM2, FMT, AM, AMT
SOUTH AMERICA FM2, FMT, AM, AMT
THAILAND FM2, FMT, AM, AMT
Settings in each case: ON, OFF.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
until the desired
memory bank is set.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to toggle between
the settings ON (activate memory bank) and
OFF (deactivate memory bank).
쏅Press the rotary control
7
to con rm the
setting.
Deactivated memory banks are skipped during
the source selection with the SRCbutton
@
.
Notes:
• In the factory default, all AM memory
banks are deactivated.
• If a memory bank is deactivated, the sta-
tions stored in this memory bank are re-
tained.
REGIONAL
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function on or o . Settings: ON, OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
SENSITIVITY
Setting the sensitivity of station seek tuning. Set-
tings: LO (–; low), HI (+; high).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
RDS
Switching the RDS function on or o . Settings: ON,
OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
Note:
If the reception area "USA", "SOUTH AMERICA"
or "THAILAND" is selected, RDS is automati-
cally switched o . The station name continues
to be shown on the display.
User settings
28
PTY
Switching the PTY function on or o . Settings: ON,
OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
PTY TYPES
Only possible with activated PTY function: Select
a programme type.
Note:
As soon as a programme type has been select-
ed, this programme type is shown as menu
item in the menu instead of "PTY TYPES".
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the available programme types.
쏅Press the rotary control
7
to con rm the
selected programme type.
PTY LANGUAGE
(only for reception area EUROPE)
Only possible with activated PTY function: Select a
language for the display of the programme types.
Settings: ENGLISH, DEUTSCH (German), FRANCAIS
(French).
쏅Press the rotary control
7
to open the menu.
쏅Press the rotary control
7
to change be-
tween the languages.
쏅Turn the rotary control
7
to select a lan-
guage.
쏅Press the rotary control
7
to con rm the se-
lected language.
TUNER AREA (reception area)
Select the reception area for the radio reception.
Settings: EUROPE, USA, SOUTH AMERICA, THAI-
LAND.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to change be-
tween the reception areas.
쏅Press the rotary control
7
to select a recep-
tion area.
The display shows "PLEASE CONFIRM".
쏅Press the rotary control
7
to con rm the
selected reception area.
Making settings in the "DISPLAY"
menu
DIMMER
Select automatic or manual switching of the dis-
play brightness for day or night. Settings: AUTO
(display brightness is automatically switched by
switching the driving lights on or o ), MANUAL
(display brightness can be switched manually).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
Automatic switching of the display brightness is
possible only If your car sound system is installed as
described in the installation instructions and your
vehicle features the corresponding connection.
SCROLLING
Select the display of scrolling text (e.g. when dis-
playing MP3 le names with more than 15 charac-
ters) either as single display or continued display.
Settings: 1X (single display), ON (continued display).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
User settings
29
LANGUAGE
(only for Hamburg 420 BT)
Select the language for the display. Settings:
ENGLISH, DEUTSCH (German).
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: ON VOL-
UME (power-on volume; 1–50) or LAST VOLUME
(volume set last before switching o the car sound
system).
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOLUME setting is se-
lected and a high volume was set the last time the
radio was switched o .
Always set the device to a moderate volume.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to switch between
the menu items "LAST VOLUME" and "ON
VOLUME" (power-on volume).
Upon selecting "LAST VOLUME":
쏅Press the rotary control
7
to con rm the
setting.
Upon selecting "ON VOLUME":
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to set the volume.
쏅Press the rotary control
7
to con rm the
setting.
TRAFFIC VOL (tra c information volume)
(reception area EUROPE only)
Setting the minimum volume for tra c announce-
ments. Settings: 1 – 50.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to set the volume.
쏅Press the rotary control
7
to con rm the
setting.
HANDSFREE VOL
(for Hamburg 420 BT only and with connected
cell phone)
Adjusting the level for handsfree volume. Settings:
–5 to +5.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to set the level
adjustment.
쏅Press the rotary control
7
to con rm the
setting.
BEEP (button beep)
Switching the con rmation beep on or o .
Settings: ON, OFF.
Note:
When storing radio stations, a con rma-
tion beep sounds even if the OFF setting is
selected.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
User settings
30
Making settings in the "CLOCK" menu
PERM CLOCK
Switch the permanent display of the time on or o .
Settings: ON, OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 15 seconds af-
ter the button is pressed last, the time is displayed
again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
SET
Setting the time.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
clockwise to set
the hours.
쏅Turn the rotary control
7
counter-clockwise
to set the minutes.
쏅Press the rotary control
7
to con rm the
time set.
Note:
When you set the time in 12-hour mode
(HOUR MODE 12), an "AM" is displayed before
the time for the time before noon or a "PM" for
the time after noon.
Making settings in the "VARIOUS"
menu
DEMO MODE
Switching the demo mode on or o . Settings:
ON, OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
In demo mode, the features of the radio are shown
as scrolling text on the display.
MIX AUX
Switching the combined playback of the AUX
source with another audio source on or o .
Settings: ON, OFF.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
With the AUX MIX ON setting, an audio source
connected to the front AUX-IN socket
;
is played
back simultaneously with the respective active
internal audio source of the car sound system
(e.g. radio or CD).
AUX MIX GAIN (AUX MIX Level)
Adjusting the level of the AUX source with com-
bined playback of the AUX source and another
audio source (AUX MIX ON). Settings: –5 to +5.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to set the level
adjustment.
쏅Press the rotary control
7
to con rm the
setting.
This setting allows raising or lowering the level of
the AUX source to adjust it to the level of the other
active audio source.
User settings
31
AUX EDIT
Entry of an individual 15-digit name for the AUX
source. Possible characters: space, 0 – 9, A – Z.
쏅Press the rotary control
7
to open the menu.
쏅Press the rotary control
7
to change the
setting.
For each of the 15 characters:
쏅Turn the rotary control
7
to set the charac-
ter.
쏅Press the rotary control
7
to con rm the
setting.
You automatically change to the next character
and nally return to the menu.
The name entered is shown on the display as soon
as you select the AUX source.
SCAN TIME
Setting the scan time in seconds. Settings:
4/8/12/16/60 SEC.
쏅Press the rotary control
7
to change the
setting.
쏅Turn the rotary control
7
to change be-
tween the settings.
쏅Press the rotary control
7
to con rm the
setting.
VERSION
Displaying the version of the CPU and software
of the radio.
쏅Press the rotary control
7
to open the menu.
쏅Turn the rotary control
7
to toggle between
the display of the version number of CPU (P)
and software (E).
NORMSET
Restoring the original factory settings of the car
sound system.
쏅Press the rotary control
7
.
The display shows "PLEASE CONFIRM".
쏅Press the rotary control
7
again to con rm
the resetting.
The car sound system switches o and is
reset to the factory settings. If a CD has been
inserted in the CD drive, the car sound system
automatically switches on again.
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
TUNER AREA EUROPE
FM1 / FM2 / FMT ON
MW* / LW* OFF
AM** / AMT** OFF
RDS ON
REGIONAL* OFF
TRAFFICINFO* OFF
SENSITIVITY HI
PTY OFF
ON VOLUME LAST VOLUME
TRAFFIC VOL* 20
BEEP ON
SCAN TIME 8 SEC
DIMMER MANUAL
HOUR MODE 24
CLOCK SET 00:00
* Only in reception area "EUROPE"
** Only in reception areas "USA", "SOUTH AMERICA"
and "THAILAND"
In the user menu, you can restore the original
factory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").
User settings | Factory settings
32
Useful information
Warranty
We provide a manufacturer's warranty for prod-
ucts bought within the European Union. For de-
vices purchased outside the European Union, the
warranty terms issued by our respective responsi-
ble domestic agency are valid. The warranty terms
can be called up from www.blaupunkt.com.
Service
In some countries, Blaupunkt o ers a repair and
pick-up service.
Information about the availability of this service in
your country can be found at www.blaupunkt.com.
If you want to take advantage of this service, you
may request a pick-up service for your car sound
system via the Internet.
Technical data
Voltage supply
Operating voltage: 10.5 – 14.4 V
Current consumption
In operation: < 10 A
10 sec. after switch-o : < 3.5 mA
Ampli er
Output power: 4 x 22 watts sine at
14.4 V at 4ohms.
4 x 50 watts max. power
Tuner
Wavebands in Europe/Thailand:
FM: 87.5 – 108 MHz
AM (MW): 531 – 1,602 kHz
LW (Europe only): 153 – 279 kHz
Wavebands in the US:
FM: 87.7 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
Wavebands in South America:
FM: 87.5 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
FM frequency response: 30 – 15,000 Hz
CD
Frequency range: 20 – 20,000 Hz
Pre-amp out
4 channels: 2 V
Input sensitivity
Front AUX-IN: 300 mV / 10 kΩ
Dimensions and weight
W x H x D: 178 x 50 x 160 mm
Weight: approx. 1.70 kg
Subject to changes
Useful information | Technical data
33
Installation instructions
Installation instructions
Safety instructions
When carrying out installation work and
making connections please observe the following
safety instructions:
• Disconnect the negative terminal of the bat-
tery! When doing so, please observe the vehi-
cle manufacturer’s safety instructions.
• Make sure you do not damage vehicle compo-
nents when drilling any holes.
• The cross sections of the positive and negative
cables must not be less than 1.5 mm².
• Do not connect the vehicle’s plug connec-
tors to the radio!
You can obtain the adapter cable required
for your vehicle type from any BLAUPUNKT
dealer.
• Depending on the model, your vehicle may
di er from the description provided here. We
accept no responsibility for any damages due
to incorrect installation or connection or for
any consequential damages.
If the information provided here is not suita-
ble for your speci c installation requirements,
please contact your Blaupunkt dealer, your ve-
hicle manufacturer or our telephone hotline.
When installing an ampli er, you must rst con-
nect the device earth connections before con-
necting the plugs for the line-out jacks.
Earth connection of external devices may not
be connected to earth of car sound system
(housing).
1 011 202 322 / 1 011 202 422:
Supplied mounting hardware
1 011 202 323 / 1 011 202 423:
34
1.
12V
2.
3.
0° - 30°
+/– 10°
+/– 10°
A
7 607 621 …
7 608 … …
Installation instructions
Available as an optional accessory
Installation kits
35
1.
2.
3.
1.
2.
4.
5.
53
182
165
1-20
7.
12V
Antenna
Preamp Out (4x)
Antenna
connection
Microphone In
(Bluetooth®, Hamburg 420 BT only)
Rear USB
Installation instructions
6.
Removal
36
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
C
B
A
14710 13 16 19
36912 15 18
258
11 14 17 20
C-1 C-2 C-3
10 Ampere
AB
1 Sub Out GND 1 Speaker out RR+
2 Radio Mute 2 Speaker out RR–
3 Sub Out 3 Speaker out RF+
4 Permanent +12V 4 Speaker out RF–
5 Aut. antenna +12V * 5 Speaker out LF+
6 Illumination 6 Speaker out LF–
7 Kl.15/Ignition 7 Speaker out LR+
8 Ground 8 Speaker out LR–
C1 C2 C3
1 NC 7 Telephone AF + 13 NC
2 NC 8 Telephone AF – 14 NC
3 NC 9 Radio Mute 15 NC
4 NC 10 Remote Control +12V * 16 NC
5 NC 11 Remote Control IN 17 NC
6 NC 12 Remote Control GND 18 NC
19 NC
20 NC
Aut. antenna / Ampli er +12V
Remote Control +12V
max. 150 mA
*
Installation instructions
37
135
248
7
4 Ohm
Relais
Radio Mute
4 Ohm
4 Ohm
4 Ohm
6
12V
Sub Out GND Sub Out
+12V
+12V
Kl. 15 +12V
Installation instructions
Subject to changes!
38
©
2012 All rights reserved by Blaupunkt. This material may be reproduced, copied or distributed for
personal use only.
Supported iPod/ iPhone devices
Our product can support below listed iPod/ iPhone generations:
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to
connect speci cally to iPod, iPhone respectively, and has been certi ed by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod, iPhone may a ect wireless performance.
iPhone, iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such
technology outside of this product is prohibited without a license from Microsoft.
39
Please keep the lled-in radio pass in a safe place!
Name: ......................................................................................................................
Type: ......................................................................................................................
Serial no.: BP ...............................................................................................................
Passport
1 011 202 _ _ _
Blaupunkt AudioVision GmbH & Co. KG
Robert-Bosch-Straße 200
D-31139 Hildesheim
http://www.blaupunkt.com
01/12
