Blaupunkt C52 Users Manual Heidelberg CD51 Gb•
C52 to the manual 20edd1e3-7c68-4923-8816-a7728fbb6a84
2015-02-04
: Blaupunkt Blaupunkt-C52-Users-Manual-363181 blaupunkt-c52-users-manual-363181 blaupunkt pdf
Open the PDF directly: View PDF .
Page Count: 26
Download | |
Open PDF In Browser | View PDF |
Radio / Cassette Bologna C52 Carolina DJ52 Operating instructions http://www.blaupunkt.com Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir Åbn her 2 SVENSKA NEDERLANDS 3 16 15 5 7 14 8 ESPAÑOL 1 9 ITALIANO 4 PORTUGUÊS 2 FRANÇAIS 6 13 12 11 10 3 ENGLISH DEUTSCH CONTROLS 1 2 3 4 5 6 7 8 26 button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button - switches RDS convenience function on/off (radio data system). Selects variable radio texts. BND button (band), source selection for radio mode, selection of FM memory levels and the wavebands MW and LW TS, starts the Travelstore function. Display (display field) button - indicates the time on the display DIS, change display contents MENU button - selects the menu for basic settings 9 : ; < = > ? @ button - opens the flip/release panel Arrow-key block OK button - confirms menu entries and starts the scan function X-BASS button to adjust and switch X-BASS on/off AUDIO button (Audio) - adjusts bass and treble, balance and fader Key block 1 - 6 TRAF button, switches traffic information standby on/off SRC button - selects between Cassette, CD changer (if connected) and AUX sources Switching to radio mode ................... 33 RDS function (AF, REG) ................... 33 Selecting the waveband/memory ...... 33 Tuning into a station .......................... 34 Setting the sensitivity of the station search mode .................................... 34 Storing stations ................................ 34 Storing stations automatically (Travelstore) ..................................... 35 Listening to preset stations ............... 35 Scanning receivable stations (SCAN) ............................................ 35 Setting the scanning time ................. 35 Programme type (PTY) ..................... 35 Optimising radio reception ................ 37 Selecting running text display ........... 37 Setting the display ............................ 37 Traffic information ..................... 38 Cassette Operation ................... 39 Cassette Play ................................... 39 Cassette Ejection ............................. 39 Changing Direction of Play ............... 39 Skipping Tracks (S-CPS) ................. 39 CLOCK - Time ........................... 44 Tone and volume balance ......... 45 Adjusting the bass ............................ 45 Adjusting the treble .......................... 45 Setting the volume distribution left/right (balance) ............................ 45 Setting the volume distribution front/rear (fader) ............................... 45 X-BASS ..................................... 46 Setting the level indicator ......... 46 External audio sources ............. 47 Technical data ........................... 47 27 ENGLISH FRANÇAIS Starting CD changer mode ............... 42 Selecting a CD ................................. 42 Selecting a track .............................. 42 Fast track selection .......................... 42 Fast search (audible) ........................ 42 Changing the display ........................ 42 Repeating individual tracks or whole CDs (REPEAT) ....................... 42 Random play (MIX) ........................... 43 Scanning all tracks on all CDs (SCAN) ............................................ 43 Interrupting Play (PAUSE) ................ 43 ITALIANO Radio mode ............................... 33 CD changer mode ..................... 42 NEDERLANDS Setting the switch-on volume ............ 31 Mute setting ..................................... 31 Telephone Audio/Navigation Audio .... 31 Setting the volume for the confirmation tone .............................. 32 SVENSKA Flip/release panel ..................... 29 Switching on/off ....................... 30 Volume adjustment ................... 31 Playing a Track Repeatedly ............... 39 Sampling All the Tracks on a Cassette (SCAN) ............................. 40 Fast Winding .................................... 40 Pausing During Play ......................... 40 Switching the Radio Monitor On / off ............................................ 40 Skipping Blank Tape ......................... 41 Selecting Tape Type ......................... 41 Dolby* B Noise Reduction ................ 41 ESPAÑOL Road safety ...................................... 28 Installation ........................................ 28 Accessories ..................................... 28 International telephone information .... 28 PORTUGUÊS Notes and accessories ............. 28 DEUTSCH TABLE OF CONTENTS NOTES AND ACCESSORIES Thank you for deciding to use a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the equipment, please contact your dealer or the telephone hotline for your country. You will find the hotline telephone numbers printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH, Hotline CM/PSS 6 Robert Bosch Str. 200 D-31139 Hildesheim, Germany Road safety Road safety has priority. Only operate your car radio if road and traffic conditions allow. Familiarise yourself with the unit before setting off on your journey. You should always be able to hear police, fire and ambulance sirens in good time. For this reason, set the volume of your car radio at a suitable level. 28 Installation If you would like to install your car radio yourself, please read the installation and connection instructions at the end of the manual. Accessories Please use only Blaupunkt-approved accessories. Remote controls The most important functions can be selected safely from the steering wheel using the optional remote controls RC 08 and RC 10. Amplifiers All Blaupunkt amplifiers are suitable for use with the radio. CD changer The following Blaupunkt CD changers can be connected to the radio: CDC A 06, CDC A 08, CDC A 072, IDC A 09 and CDC A 02. The CD changers CDC A 5 and CDC A 071 can also be connected if you use an adapter cable (Blaupunkt no.: 7 607 889 093). The Blaupunkt CDC A08 CD changer is included with the Carolina DJ52. International telephone information Should you have any questions about how to use the car radio or require any further information, please call us! The telephone information service numbers are printed on the last page of this manual. ● ● ● straight and then to the left out of the unit. After removing the flip/release panel, the unit switches itself off. All the current settings are saved. If there is a CD in the unit, it remains there. Attaching the flip/release panel ➮ Slide the flip/release panel from left to right into the unit guide. ➮ Press the left side of the panel into SVENSKA NEDERLANDS the unit until it slots into place. Removing the flip/release panel 1 Note: ● Do not press against the display while attaching the flip/release panel. If the device was switched on when the panel was removed, it will switch itself back on automatically with the last settings (radio, Cassette, CD-changer or AUX) as soon as the panel is replaced. 29 ESPAÑOL Note: ● Do not drop the flip/release panel. ● Do not expose the flip/release panel to direct sunshine or other sources of heat. ● Keep the flip/release panel in the case provided. ● Avoid touching the contacts of the flip/release panel. Please clean it when necessary with some white spirit on a lint-free cloth. ➮ First pull the flip/release panel PORTUGUÊS Your car radio is fitted with a flip/release panel to guard against theft. Without this panel, the unit is worthless to the thief. Protect your unit from theft by taking the flip/release panel with you every time you leave the car. Do not leave the panel behind in the car, even if it is out of sight. The constructive design of the panel makes for simple handling. ENGLISH Theft protection FRANÇAIS ➮ Press the This unlatches the flip/release panel. ITALIANO button 1. Flip/release panel DEUTSCH FLIP/RELEASE PANEL SWITCHING ON/OFF Switching on/off There are various ways of switching the car radio on and off, as described below. Switching on/off using the ignition If the car radio is correctly connected to the ignition and has not been switched off using the button 3, it is switched on/off simultaneously with the ignition. You can also switch on your car radio when the vehicle ignition is off. ➮ To do so, press the button 3. Note: ● To protect the vehicle battery, the unit switches off automatically after one hour. Switching on/off using the flip/ release panel ➮ Remove the flip/release panel. The unit switches itself off. ➮ Replace the flip/release panel once more. The device switches on. The most recent setting (radio, Cassette, CD-changer or AUX) is restored. Switching on/off using the button 3 ➮ To switch the unit on, press the button 3. ➮ To switch the unit off, hold the button 3 down for more than two seconds. The car radio is now switched off. 30 Switching on by means of cassette insertion If there is no cassette in the deck when the device is switched off, ➮ press the button, 9. The flip-release panel opens. ➮ Insert the cassette with the open side to the right gently into the drive until you can sense some resistance. The cassette is automatically drawn into the drive. As the cassette is drawn in, it must neither be held back nor assisted. ➮ Close the panel with gentle pressure until you feel it engage. The device switches on. Cassette play starts. Volume adjustment Mute setting The system volume can be adjusted in steps from 0 (off) to 66 (maximum). This feature enables you to lower the system volume instantaneously (mute). ➮ To raise the system volume, turn ➮ Briefly press button 3. ➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “ON VOLUME” appears on the display. buttons : to set the switch-on volume. If you select the “LAST VOL” setting, the volume played before the unit was last switched off will be reactivated. ➮ Use the Note: To protect your hearing, the poweron volume is limited to a value of “38”. If the volume level was higher when the unit was switched off and the “LAST VOL” setting is selected, the volume will be reset to “38” when the unit is switched on again. When you have finished making your changes, ● ➮ press the MENU button 8 or OK ; twice. ENGLISH edly until “MUTE LEVEL” appears on the display. ➮ Use the buttons : to set the mute level. ➮ When you have completed the setting, press either the MENU button 8 or OK ; twice. Telephone Audio/Navigation Audio If your car radio is connected to a mobile telephone or navigation system, then when the telephone is taken “off the hook”, or when the navigation system is speaking, the car radio is muted. The telephone conversation or speech output are reproduced via the car radio speakers. This requires the mobile telephone or navigation system to be connected to the car radio as described n the installation instructions. For this you will need the cable with the following Blaupunkt number: 7 607 001 503. Your Blaupunkt dealer can tell you which navigation systems can be used with your car radio. 31 FRANÇAIS ➮ Press the MENU button 8. ➮ Press the or button : repeat- ITALIANO You can set the volume at which you wish the car radio to play when switched on. NEDERLANDS Setting the switch-on volume Activating the mute setting The unit's mute level is adjustable. SVENSKA the volume control 2 to the left. “MUTE” appears on the display. ESPAÑOL ➮ To lower the system volume, turn PORTUGUÊS the volume control 2 to the right. DEUTSCH VOLUME ADJUSTMENT VOLUME ADJUSTMENT If a traffic announcement is received during a telephone call, or while the navigation system is speaking, the traffic announcement is not reproduced until the call or the speech output has finished. If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be heard when the traffic announcement has finished. The volume at which navigation output or telephone calls start is adjusted as follows: ➮ Press the MENU button 8. ➮ Press the or button : until “TEL/NAVI VOL” appears in the display. ➮ Set the desired volume with the buttons :. ➮ When the setting process is complete, press the MENU button 8 or OK ; twice. Note: You can adjust the volume level of telephone calls and of speech output as they are made with the volume control 2. 32 Setting the volume for the confirmation tone If you hold down a button for longer than two seconds when using certain functions, e.g. storing a station on a station button, a confirmation tone (beep) sounds. The volume of this beep is adjustable. ➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “BEEP” appears on the display. ➮ Adjust the volume using the and buttons :. “0” means the beep is off, “9” means maximum beep volume. ➮ When you have completed the setting, press either the MENU button 8 or OK ;. or ➮ keep pressing the SRC button @ until “RADIO” appears in the display. RDS function (AF, REG) The RDS functions AF (Alternative Frequency) and REG (Regional) extend your radio's range of functions. ● AF: If this RDS function is activated, the unit automatically tunes into the best receivable frequency for the station that is currently set. ● REG: Some radio stations set aside some of their broadcasting time for regional programmes that provide different regional content. With the REG function, your car radio is prevented from switching to alternative frequencies with a different regional content. Note: ● REG has to be specially activated/ deactivated in the unit's menu. button :. ;. Switching the RDS convenience function on/off ➮ To use the RDS functions AF and REG, press the RDS button 4. The RDS convenience functions are active when RDS lights up on the display with a symbol. When the RDS convenience functions are activated, “REG ON” or “REG OFF” appears briefly on the display. Selecting the waveband/ memory This unit can receive programmes broadcast over the FM as well as MW and LW (AM) waveband. There are three preset memory levels for the FM range and one each for the MW and LW ranges. Six stations can be stored on each memory level. ➮ In order to switch between memory levels or wavebands, briefly press the BND/TS button 5. 33 ENGLISH FRANÇAIS or ➮ Press the MENU button 8 or OK ITALIANO ➮ press the BND/TS button 5 ➮ To switch REG on or off, press the NEDERLANDS If you are in cassette, CD changer or AUX mode, edly until “REG” appears on the display. “OFF” or “ON” will be displayed alongside “REG”. SVENSKA Switching to radio mode ➮ press the MENU button 8. ➮ Press the or button : repeat- ESPAÑOL This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as it is received. Switching REG function on/off To use the RDS functions AF and REG, PORTUGUÊS Radio mode DEUTSCH RADIO MODE RADIO MODE Tuning into a station There are various methods available for tuning into a station. Automatic station search mode ➮ Press the or button :. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. ➮ Press either the or buttons :. Note: ● You can only tune into stations manually if the RDS function has first been deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called “broadcasting network”. or button : to move to the next station on the broadcasting network. ➮ Press the Note: If you want to use this feature, the RDS function must first be activated. You will then only be able to switch to stations that you have received once already. To do so, use the Scan or Travelstore function. ● 34 Setting the sensitivity of the station search mode You can choose whether you wish to preset only strong or also poor-reception stations. ➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “SENS” appears on the display. ➮ Press the button :. The display shows the currently set value for sensitivity. “SENS HI6” denotes maximum sensitivity. “SENS LO1” is the minimum. buttons : to set the desired degree of sensitivity. ➮ Use the ➮ When you have completed the settings, press the MENU button 8 or the OK buttons ;. Storing stations Storing stations manually ➮ Select the required FM memory level, FM1, FM2, FMT or either waveband MW or LW. ➮ Tune into the desired station. ➮ Hold down one of the preset station buttons 1 - 6 > on which you wish to store the station for more than two seconds. for more than two seconds. The automatic station-storing procedure begins. “TRAVEL-STORE” appears on the display. Once the process is completed, the station stored in FMT memory location 1 is played. Listening to preset stations ➮ Select the memory or frequency range. ➮ Hold down the preset station button 1 - 6 > of the desired station. Scanning receivable stations (SCAN) You can briefly listen in to all receivable stations. The scanning time can be set in the menu at between 5 and 30 seconds. Starting SCAN ➮ Hold down the OK button ; for more than two seconds. The scanning process begins. “SCAN” appears briefly on the display, followed by the current station name or frequency, which flashes. edly until “SCANTIME” appears on the display. buttons : to set the desired scanning time. ➮ Use the ➮ Once the setting has been completed, press the MENU button 8 or OK ; twice. Note: ● The set scanning time also applies to scanning in the CD and CD changer mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. This information can be received and displayed by your car radio. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. 35 ENGLISH FRANÇAIS ➮ Hold down the BND / TS button 5 Setting the scanning time ➮ Press the MENU button 8. ➮ Press the or button : repeat- ITALIANO Note: ● Stations that were previously stored in this memory are deleted in the process. The scanning process is completed, the station last scanned remains active. NEDERLANDS ➮ Press the OK button ;. SVENSKA You can store the six stations with the strongest reception in the region automatically (only FM). The stations are stored in the FMT memory. ESPAÑOL Ending SCAN, continuing to listen to a station PORTUGUÊS Storing stations automatically (Travelstore) DEUTSCH RADIO MODE RADIO MODE PTY-EON When the programme type has been selected and the search started, the car radio switches from the current station to a station featuring the selected programme type. Note: ● If no station with the selected programme type is located, a beep sounds and “NO PTY” appears briefly on the display. The unit tunes into the station last received once again. ● If the set station or another station in the broadcasting network transmits the selected programme type at a later time, the car radio automatically switches from the current station - or from Cassette or CD changer mode - to the station featuring the desired programme type. Switching PTY on/off ➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “PTY ON” or “PTY OFF” appears on the display. or button : to switch PTY on (ON) or off (OFF). When PTY is activated, PTY lights up on the display. ➮ Press the ➮ Press the MENU button 8 or OK ;. 36 Selecting programme type and starting a search ➮ Press the or button :. The current programme type appears on the display. ➮ If you would like to select a different programme type, you can change to another programme time within the time the programme is displayed by pressing the or button :. Or ➮ Press one of the buttons 1 - 6 > to select the programme type stored on that particular button. The selected programme type will appear briefly on the display. or button : to start the search. The next station corresponding to your selected programme type will be tuned into. ➮ Press the Storing the programme type on the station buttons or button : to select a programme type. ➮ Use the ➮ Hold down the desired station button 1 - 6 > for more than two seconds. The programme type is now stored on the selected station button 1 - 6 >. repeatedly until “HICUT” appears on the display. or button : to select HICUT. “HICUT 0” denotes no treble reduction, “HICUT 1” the greatest automatic reduction of the treble and the interference level. ➮ Use the ➮ Press the MENU button 8 or OK ;. ➮ In order to reactivate the display of “running texts”, hold down the RDS button 4 until “NAME VAR” appears on the display. Setting the display In radio mode you can choose between the continuous display of the time or the continuous display of the station name/ frequency. / DIS button 7 until the desired feature appears on the display. ➮ Hold down the ENGLISH ESPAÑOL ➮ Press the MENU button 8. ➮ Press the or button : “NAME FIX” appears on the display. PORTUGUÊS Switching HiCut on/off ➮ Press the RDS button 4 until FRANÇAIS Some radio stations use the RDS signal to broadcast advertising or other information instead of their station name. Such “running texts” appear on the display. You can either allow or block the display of running text. ITALIANO High-frequency cut-off feature (HICUT) The HiCut function improves the sound during poor radio reception (only FM). If interference occurs, the treble is automatically reduced and thus also the interference level. NEDERLANDS Selecting running text display SVENSKA Optimising radio reception DEUTSCH RADIO MODE 37 TRAFFIC INFORMATION Traffic information Your car radio is equipped with an RDSEON reception system. EON stands for Enhanced Other Network. When a traffic announcement (TA) is broadcast, your unit will automatically switch, within a broadcasting network, from a station which does not transmit traffic information to one that does. The unit reverts to the programme previously listened to when the traffic announcement is over. Switching traffic information priority on/off ➮ Press the TRAF button ?. Priority for traffic announcements is activated when the traffic-jam symbol lights up on the display. Note: You will hear a warning tone, ● if you leave the reception area of a traffic information station to which you are currently tuned in; ● if you leave the reception area of a traffic information station when you are listening to a CD and the subsequent automatic search cannot locate a new traffic information station; ● if you retune the radio from a traffic information station to one that does not broadcast traffic information. Either deactivate the priority for traffic information or switch to a station which broadcasts traffic information. 38 Setting the traffic announcement volume ➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “TA VOLUME” appears on the display. or button : to set the desired volume. ➮ Use the ➮ Once the setting is completed, press the MENU button 8 or OK ; twice. Note: ● You can also adjust the volume during a traffic announcement for its duration by using the volume control 2. Note: ● You can also adjust the tone and volume balance for traffic announcements. Please see the “Tone and Volume Balance” section. button 9. The flip-release panel opens. ➮ Insert the cassette into the cassette slot with the open side to the right. ➮ Close the control unit. The cassette starts playing with the side that is facing upwards. ● If there is already a cassette in the device ➮ Press the SRC button @ until “CASSETTE” appears in the display. The cassette is played in whichever direction was last selected. Cassette Ejection ➮ Press the button 9. The flip-release panel opens and the cassette is ejected. ➮ Remove the cassette and close the release panel or ➮ Insert a new cassette. >. Note: ● At the end of the tape, the direction of play is automatically reversed (auto-reverse). Skipping Tracks (S-CPS) To skip to the next or a later track button : one or more times. “CPS FF” and the number of tracks to be skipped appear in the display. The tape fast forwards to the next track or the chosen later track. To skip track backwards ➮ Press the button : one or more times. “CPS FR” and the number of tracks to be skipped appear in the display. The tape is rewound to the start of the present track or the desired earlier track. ➮ Press the Playing a Track Repeatedly ➮ Press button 4 RPT >. The present track is repeated. RPT shows in the display. While the tape is being rewound after the end of the track, “REPEAT TRCK” appears in the display. To stop repeating the track ➮ Press button 4 RPT > again. Play continues as normal. RPT disappears from the display. 39 ENGLISH ➮ Press the ➮ Press button 2 FRANÇAIS If there is no cassette in the device ITALIANO ● NEDERLANDS To change between SIDE A and SIDE B SVENSKA Cassette Play ESPAÑOL Changing Direction of Play PORTUGUÊS Cassette Operation DEUTSCH CASSETTE MODE CASSETTE MODE Sampling All the Tracks on a Cassette (SCAN) ➮ Hold down the OK button ; for longer than two seconds. “CAS SCAN” appears in the display. Samples from all the tracks on the tape are played in ascending order. To halt the scan ➮ Press the OK button ; a second time. The track that is currently being sampled will continue playing. Note: ● The duration of samples can be adjusted. Refer to the section on “Setting Sample Time” under “Radio Operation”. ● To use the S-CPS, RPT and SCAN functions, there must be a pause of at least three seconds between the tracks on the cassette. Fast Winding Fast forward ➮ Press the button :. “FORWARD” appears in the display. Fast rewind ➮ Press the button :. “REWIND” appears in the display. Stopping fast winding ➮ Press the OK button ;. Play continues. Note: ● While the tape is being fast wound, the last radio station tuned in can be listened to. This requires the “Radio monitor” function to be switched on. Pausing During Play To interrupt tape play ➮ Press button 1 Play is interrupted and “PAUSE” appears in the display. ➮ Press button 1 > again to resume play. Switching the Radio Monitor On / off Note: ● The radiomonitor can only be set if a cassette is being played. ➮ Press the MENU button 8. ➮ Press the or button : until “RM ON” or “RM OFF” appears in the display. or button : to switch the radio monitor on or off. ➮ Press the ➮ Press the MENU button 8 or OK ;. 40 >. You should switch on the Dolby function whenever you play tapes recorded using the Dolby B process. Note: ● The blank skip can only be set if a cassette is being played. When the Dolby function is switched on, shows in the display. Switching Blank Skip On / Off ➮ Press the MENU button 8. ➮ Press the or button : until ➮ Press button 6 >. *Noise reduction system manufactured under licence from Dolby Laboratories. The word Dolby and the double-D symbol are trademarks of Dolby Laboratories. ITALIANO “BLANK SKIP” appears in the display. ENGLISH Dolby* B Noise Reduction You can automatically skip sections of blank tape that last longer than 10 seconds. This requires the blank skip function to be activated. FRANÇAIS Skipping Blank Tape DEUTSCH CASSETTE MODE or button : to switch the blank skip function on or off. NEDERLANDS ➮ Press the ➮ Press the MENU button 8 or OK ; twice. Selecting Tape Type SVENSKA If you are playing a “Metal” or “CrO2” tape, you should set the tape type selector to “MTL ON”. To select the tape type ESPAÑOL ➮ Press button 3 MTL >. PORTUGUÊS Either “MTL ON” or “MTL OFF” will appear briefly in the display. 41 CD CHANGER MODE CD changer mode Fast search (audible) Note: ● Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions accompanying your CD changer. For a fast search backwards or forwards Starting CD changer mode ➮ Press the SRC button @ repeatedly until “CHANGER” appears on the display. Playback begins with the first CD the CD changer recognises. Selecting a CD ➮ To change up or down to a different CD, press the or button : once or several times. Selecting a track ➮ To move up/down from one track to another on the current CD, press the or button : once or several times. Fast track selection For fast track selection backwards or forwards: ➮ hold down either the or button : until fast track selection backwards or forwards begins. 42 buttons : pressed until the fast search backwards or forwards begins. ➮ keep the Changing the display ➮ To alter the display between track number and playing time or track number and time or track number / DIS and CD number, press the 7 button once or several times for more than two seconds until the desired elements appear on the display. Repeating individual tracks or whole CDs (REPEAT) ➮ To repeat the current track, press the button 4 RPT > briefly. “REPEAT TRCK” appears briefly on the display and RPT lights up. ➮ To repeat play of the entire CD, press the button 4 RPT > once again. “REPEAT DISC” appears briefly on the display and RPT lights up. Stopping REPEAT ➮ To stop the repeat function for the current track or CD, press the button 4 RPT > repeatedly until “REPEAT OFF” appears briefly on the display and RPT goes out. Interrupting Play (PAUSE) ➮ Press the button 1 >. ENGLISH FRANÇAIS ITALIANO NEDERLANDS Stopping SCAN ➮ To stop scanning, press the OK button ; briefly. The track currently being scanned then continues play. Note: ● You can set the scanning time as required. Please see the section “Setting the scanning time” in the “Radio mode” chapter. “PAUSE” appears on the display. Ending Pause ➮ Press the button 1 > during the pause. Play then resumes. SVENSKA Stopping MIX ➮ Press the button 5 MIX > until “MIX OFF” appears briefly on the display and MIX goes out. on all inserted CDs in ascending order, hold down the OK button ; for more than two seconds. “SCAN” appears on the display. ESPAÑOL CD in random order, press the button 5 MIX >. “MIX CD” appears briefly on the display and MIX lights up. ➮ To play the tracks of all the inserted CDs in random order, press the button 5 MIX > once again. “MIX ALL” appears briefly on the display and MIX lights up. Note: ● In the case of CD changers CDC A 08 and IDC A 09, all CDs in the changer are randomly selected. All other changers first play all the tracks on a CD in random selection before moving to the next CD in the changer. Scanning all tracks on all CDs (SCAN) ➮ To listen in briefly to all the tracks PORTUGUÊS Random play (MIX) ➮ To play the tracks on the current DEUTSCH CASSETTE MODE 43 CLOCK - TIME buttons : to switch between the 12 and 24-hour mode. CLOCK - Time ➮ Press the Briefly displaying the time ➮ Press the / DIS 7 button briefly ➮ Press the MENU button 8 or OK to display the time. Setting the time Setting the time manually ➮ To set the time manually, press the MENU button 8. or button : repeatedly until “CLOCKSET” appears on the display. ➮ Press the ➮ Press the button :. The time appears on the display. The minutes flash and can now be set. ➮ Set the minutes using the or ➮ Once the minutes have been set, press the button :. The hours now flash. or but- tons :. ➮ Press the MENU button 8 or OK ; twice, once you have completed the setting. Selecting the 12/24-hour clock mode ➮ Press the MENU button 8. “MENU” appears on the display. or button : repeatedly until “24 H MODE” or “12 H MODE” appears on the display. ➮ Press the 44 Viewing the time with the car radio switched off and the ignition on ➮ To view the time when the car radio is switched off and the ignition is switched on, press the MENU button 8. “MENU” appears on the display. or button : repeatedly until “CLK DISP OFF” or “CLK DISP ON” appears on the display. ➮ Press the button : to switch between ON and OFF. ➮ Press the buttons :. ➮ Set the hours using the ; once you have completed the setting. ➮ Press the MENU button 8 or OK ; once you have completed the setting. Briefly viewing the time when the car radio is switched off In order to view the time when the car radio is switched off, ➮ press the button / DIS 7. The time appears on the display for eight seconds. ➮ Press the AUDIO = button once “BASS” appears on the display. Setting the volume distribution front/rear (fader) ➮ To set the volume distribution front/ ➮ Press the or button : to set the bass. ➮ Press the AUDIO = button once you have completed the setting. Adjusting the treble ➮ Press the AUDIO = button. “BASS” appears on the display. button : repeatedly until “TREBLE” appears on the display. ➮ Press the ➮ Press the or button : to set the treble. or button : to set the volume distribution left/right. ➮ Press the you have completed the setting. rear (fader), press the AUDIO = button. “BASS” appears on the display. button : repeatedly until “FADER” appears on the display. ➮ Press the or button : to set the volume distribution front/rear. ➮ Press the ➮ Press the AUDIO = button once you have completed the setting. PORTUGUÊS ➮ Press the AUDIO = button once ENGLISH Adjusting the bass ➮ Press the AUDIO = button. button : repeatedly until “BALANCE” appears on the display. FRANÇAIS ➮ Press the ITALIANO Note: ● You can only adjust the audio settings for traffic announcements whilst a traffic announcement is actually being played. NEDERLANDS right (balance), press the AUDIO = button. “BASS” appears on the display. SVENSKA You can adjust the sound settings for each source separately (radio, Cassette, CD changer, AUX and traffic announcement). The volume distribution settings apply to all the audio sources. Setting the volume distribution left/right (balance) ➮ To set the volume distribution left/ ESPAÑOL Tone and volume balance DEUTSCH TONE AND VOLUME BALANCE you have completed the setting. 45 X-BASS LEVEL INDICATOR X-BASS Setting the level indicator X-Bass means increased bass at low volumes. Note: ● X-BASS can be adjusted separately for each audio source (radio, Cassette, CD-changer and AUX). The spectrometer (level display) briefly provides a symbolic display of the volume and the audio control settings whilst you are adjusting them. When settings are not being made, the spectrometer indicates the original level of the car radio. You can also set the type of spectrometer on your menu. There are two types available. Setting X-BASS boost The X-BASS boost can be increased in steps from 1 to 3. “X-BASS-OFF” means the function is switched off. ➮ Press the X-BASS button < ➮ Press the or button : until the desired setting appears in the display. When setting is complete ➮ Press the X-BASS button <. Selecting a spectrometer type ➮ Press the MENU button 8. “MENU” appears on the display. or button : repeatedly until “EQ DISPLAY” appears on the display. ➮ Press the or button : to choose between displaying “SPECTRUM 1” and “SPECTRUM2” or “EQ DISP OFF” set the volume distribution left/right. ➮ Press the ➮ Press the MENU button 8 or OK ; twice, once you have completed the setting. 46 External audio sources Technical data In place of the CD changer it is also possible to connect other external audio sources to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. The AUX output has to be switched on in the install menu. To connect up an external audio source, you will need an adapter cable (Blaupunkt no.: 7 607 897 093), obtainable from any authorised Blaupunkt dealer. Amplifier 4 x 25 watts sine in accordance with DIN 45 324 at 14.4V, 4 x 45 watts max. power Tuner Frequency ranges: FM: 87.5 - 108 MHz MW: 531 - 1 602 kHz LW: 153 - 279 kHz ITALIANO Switching the AUX input on/off ➮ Press the MENU button 8. Output power: or button : repeatedly until “AUX-IN-1 OFF” or “AUXIN-1 ON” appears on the display. FM transmission range: 35 - 16 000 Hz or button : to switch AUX on or off. Cassette Note: When the AUX input is switched on, it can be selected using the SRC button @. SVENSKA ; once you have completed the setting. Pre-amp output 4 channels: 3V ESPAÑOL ➮ Press the MENU button 8 or OK Transmission range: 30 - 18 000 Hz Input sensitivity: AUX 1 input: Tel-/Navi input: 2 V / 6 kΩ 10 V / 1 kΩ PORTUGUÊS ➮ Press the NEDERLANDS “MENU” appears on the display. ➮ Press the DEUTSCH TECHNICAL DATA FRANÇAIS EXTERNAL AUDIO SOURCES Subject to change! 47 Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviço / Servicenumre Country: Phone: Fax: WWW: http://www.blaupunkt.com Germany (D) 0180-5000225 05121-49 4002 Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherland Norway Portugal Spain Sweden Switzerland (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) 01-610 390 02-525 5454 44 898 360 09-435 991 01-4010 7007 01-89583 8880 0800-550 6550 01-4149400 02-369 6331 40 4078 023-565 6348 66-817 000 01-2185 00144 902-120234 08-7501500 01-8471644 01-610 393 91 02-525 5263 44-898 644 09-435 99236 01-4010 7320 01-89583 8394 01-576 9473 01-4598830 02-369 6464 40 2085 023-565 6331 66-817 157 01-2185 11111 916-467952 08-7501810 01-8471650 Czech. Rep. Hungary Poland (CZ) (H) (PL) 02-6130 0441 01-333 9575 0800-118922 02-6130 0514 01-324 8756 022-8771260 Turkey (TR) 0212-3350677 0212-3460040 USA (USA) 800-2662528 Brasil (Mercosur) (BR) 708-6817188 +55-19 3745 2769 +55-19 3745 2773 Malaysia (Asia Pacific) (MAL) +604-6382 474 +604-6413 640 Blaupunkt GmbH 01/02 26 K7/VKD 8 622 403 154
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:02:04 14:23:25Z Modify Date : 2002:10:17 10:43:43+02:00 Subject : Heidelberg CD51 gb• Page Count : 26 Creation Date : 2002:02:04 14:23:25Z Mod Date : 2002:10:17 10:43:43+02:00 Producer : Acrobat Distiller 5.0.1 für Macintosh Author : Tönnies Keywords : Metadata Date : 2002:10:17 10:43:43+02:00 Creator : Tönnies Title : Heidelberg CD51 gb• Description : Heidelberg CD51 gb• Page Mode : UseThumbs Has XFA : NoEXIF Metadata provided by EXIF.tools