Blaupunkt Car Cd Changer Users Manual 2800 YL_2006_spec
Car CD Changer to the manual 0a5190e5-a17c-459b-bd2c-c9278bc3a77f
2015-02-04
: Blaupunkt Blaupunkt-Car-Cd-Changer-Users-Manual-363185 blaupunkt-car-cd-changer-users-manual-363185 blaupunkt pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | |
Open PDF In Browser | View PDF |
Radio / Cassette / Changer Orlando DJ A Operating instructions Orlando DJ A d 1 12.04.2001, 13:31 Uhr DEUTSCH ENGLISH 23 22 21 19 18 17 20 FRANÇAIS 24 16 15 NEDERLANDS ITALIANO 26 25 14 1 SVENSKA 13 3 4 5 6 7 8 9 10 11 12 PORTUGUÊS ESPAÑOL 2 3 Orlando DJ A d 3 12.04.2001, 13:31 Uhr Switching the audio source ........ 38 Radio operation with RDS ........... 39 AF - Alternative frequency .................... 39 REG - regional programme .................. 39 Selecting a waveband .......................... 39 Station tuning ........................................ 39 Automatic tuning / ....................... 39 Manual tuning with << >> .................. 40 Scrolling through the broadcasting networks (only FM) ............................... 40 Changing the memory bank (FM) ......... 40 Receiving traffic programme stations with RDS-EON................ 44 Traffic announcement priority on/off .... 44 Warning beep ....................................... 44 Switching the warning beep off ......... 45 Automatic seek tuning start .................. 45 Adjusting the volume for traffic announcements and the warning beep ................ 45 Adjusting GEO for traffic messages and the warning beep ........................... 45 CD changer control A 05 .............. 48 Switching to CDC operation ................. 48 Selecting CDs and titles ....................... 48 MIX playback ........................................ 48 Selecting the display mode .................. 48 Storing the display mode ...................... 49 SCAN operation .................................... 49 Entering CD names .............................. 49 Deleting CD names with DSC-UPDATE ...................................... 49 DSC programming ....................... 50 Overview of the DSC factory settings .. 52 Appendix ....................................... 53 Specifications ........................................ 53 29 Orlando DJ A gb 29 12.04.2001, 13:32 Uhr DEUTSCH ENGLISH FRANÇAIS Putting the unit into operation .............. 37 Removing the KeyCard ........................ 37 “Training” a second KeyCard/ Replacing a KeyCard ............................ 37 Displaying the radio pass data ............. 37 Short Additional Memory (S.A.M.) ........ 38 Turn On Message (T.O.M.) .................. 38 Optical indication for extra security ...... 38 Care of your KeyCard ........................... 38 ITALIANO KeyCard theft protection system ........................................... 37 Inserting a tape ..................................... 46 Removing a tape ................................... 46 Fast Forward/Rewind ........................... 46 Selecting titles with S-CPS ................... 46 Switching the tape side ........................ 46 Tape equalisation ................................. 46 Scanning cassette titles with SCAN ..... 47 Dolby B NR* .......................................... 47 Skipping unrecorded tape portions with Blank Skip ..................................... 47 Listening to the radio during fast tape winding with RM .................................... 47 Care notes ............................................ 47 NEDERLANDS Precautions ........................................... 36 Traffic safety ......................................... 36 Installation ............................................. 36 Telephone mute .................................... 36 Accessories .......................................... 36 Tape operation ............................. 46 SVENSKA Important notes ............................ 36 Storing stations ..................................... 40 Automatically storing the strongest stations with Travelstore ............................ 41 Recalling stored stations ...................... 41 Scanning stored stations with Preset Scan .......................................... 41 Scanning stations with Radio-Scan ...... 41 Changing the scan time ........................ 41 Selecting the seek tuning sensitivity .... 41 Switching from stereo to mono (FM) .... 42 PTY – Programme Type ....................... 42 Switching PTY on/off ......................... 42 Programme type ................................... 42 Checking the programme type of the station .......................................... 42 Displaying the selected programme type .................................................... 42 Selecting a programme type ............. 42 Storing programme types .................. 43 Scanning stations with PTY-SCAN ... 43 PTY priority ........................................ 43 ESPAÑOL Quick reference ............................ 30 PORTUGUÊS Contents Quick reference 1 Switching on/off with the ON button: Press ON. When switching the set on with the ON button, the KeyCard has to be inserted. The unit will play with the preadjusted volume. Switching on/off with the KeyCard: The set has to be turned on via the ON button. Note: Read the information in chapter “KeyCard theft protection system”. Switching on/off via the ignition: When connected correspondingly, the set can also be turned on and off via the vehicle ignition. After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle. Switching on with the ignition being switched off: To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows: Press ON after the double beep tone. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after a playback time of one hour. 2 VOL+ / VOLTo alter the volume. Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX). You may also change the VOL FIX setting (see chapter “DSC programming”). 3 For instantly muting the volume. button the volume By pressing the will be muted immediately. “MUTE” will appear in the display. The function is cancelled by pressing or VOL+. button When pressing VOL-, the normal volume will be by one grade lower than the mute volume. To programme the mute volume level, proceed as follows: • Adjust the desired volume. for two seconds until you • Press hear a beep. Now this volume level is stored as your mute volume. Extra function Memory button in the DSC menu. 4 FMT Press repeatedly to switch between the FM memory banks I, II and T (Travelstore). When pressing this button, the system will automatically switch to FM. Extra function FMT To store the six most powerful stations automatically with Travelstore: Press FMT until you hear a beep or “T-STORE” appears in the display. 5 M•L - toggle switch To toggle between medium and long wave reception. 30 Orlando DJ A gb 30 12.04.2001, 13:32 Uhr DEUTSCH 6 Rocker switch Radio operation Changer operation CD selection Up Fast forward ITALIANO Up Down Down Fast rewind Title selection Stop function by pressing . Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To restart a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed. Extra rocker switch functions: Further setting functions with AUD J GEO I DSC MODE H PTY > Condition: The corresponding function has to be activated. 31 Orlando DJ A gb 31 12.04.2001, 13:32 Uhr NEDERLANDS Title selection (S-CPS) SVENSKA <>> To scroll through the station networks when AF is on, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ... . / ESPAÑOL Station search Up Down <>> Up/Down in short intervals when AF is off PORTUGUÊS / FRANÇAIS ENGLISH Tape operation 7 Display f) lo g) I, II, T h) 6 i) LD j) k) AF a e fg h i j k l m n o b m) TA n) PTY o) B p) MTL r q p c l) TP s d q) RM r) BLS s) MIX a) NDR2 b) TR 2 - Station name - Track (side) 2 of the cassette c) VIVALDI - CD name or d) 1 : 52 - CD time (playback time) and number for changer operation e) FM - Waveband - Seek tuning sensitivity - Memory bank I, II or Travelstore - Preset button (1-6) - Loudness - Stereo - Alternative frequency for RDS operation - A traffic station is being received - Priority for traffic stations - Programme type function - Dolby B noise reduction - A metal or CrO2 type is being played - Radio-Monitor (to listen to the radio during fast tape winding) - Blank-Skip (to skip unrecorded tape portions) - CD playback in random order 8 KeyCard theft protection system To operate the set it is necessary that the KeyCard is inserted. KeyCard For this purpose, introduce the KeyCard (with the contact area showing up) into the slot above the tongue sticking out of the unit. To remove the card, press first to unlock. Read also the information in chapter “KeyCard theft protection system”. Flashing KeyCard tongue When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection. For more information see chapter “DSC programming”. This flashlight can be switched off by pushing in the tongue and lock. 32 Orlando DJ A gb 32 12.04.2001, 13:32 Uhr Press MIX as many times until the desired function briefly appears in the display. : SC Radio operation Scan Press SC briefly – “FM SCAN” and the name of the scanned station will alternately appear in the display. The unit will scan all stations which can be received. CD-Scan Press SC. “CDC-SCAN” will appear in the display. All CD titles will be scanned briefly. To stop CD-Scan: Press SC once again. ; lo To switch the seek tuning sensitivity level: Press button briefly. To switch between mono and stereo reception: Press button for approximately two seconds (beep). will disappear for The stereo symbol mono playback. Regional function on/off: Press the AF button for approximately two seconds until you hear a beep. “REG-ON” or “REG-OFF” will appear in the display (see chapter REG - regional programme). > PTY (Programme Type) In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one programme type, such as for example NEWS, SPORT, POP MUSIC, EDUCATE, etc. 33 Orlando DJ A gb 33 12.04.2001, 13:32 Uhr DEUTSCH ENGLISH FRANÇAIS ITALIANO MIX OFF The Mix function is deactivated. Changer operation NEDERLANDS MIX MAG The CD titles will be played at random. The individual discs are also selected in random order. = AF Alternative frequency during RDS operation: When “AF” lights up in the display, the system will automatically seek a frequency offering better reception of the same RDS programme. AF on/off: Press AF briefly. SVENSKA MIX CD The CD titles will be played at random. The individual discs are selected in numeric order. < TA (priority for traffic announcements) When “TA” lights up in the display, the system will play traffic stations only. Priority on/off: Press TA. ESPAÑOL Changer (CDC) operation Preset Scan Press SC for approximately two seconds until you hear a beep. “SCAN” and the name of the scanned station will alternately appear in the display. The unit will scan all stations stored on the preset buttons. To stop Scan / Preset Scan: Press SC once again. PORTUGUÊS 9 MIX ? SRC (source) You can switch between the different audio sources radio, tape, and CDC. When this function has been activated, “RM” shows on the display panel. The radio is played back during fast tape run. @ DIS D Cassette loading slot Insert the tape with side A or 1 facing up, the open side showing to the right. E B Radio operation Press to eject the tape. When pressing the DIS button, the frequency will be displayed for approximately four seconds. Tape operation When pressing the DIS button, the station name/frequency will be displayed for approximately four seconds. Changer operation To switch the display mode and select between name, time (playback time) and number (disc number): • Press DIS briefly. A RM (Radio Monitor) Press this button to listen to the radio while fast forwarding or rewinding the tape. To switch RM on/off: Press RM. C 1, 2, 3, 4, 5, 6 - preset buttons On FM, you can store six stations for each of the memory banks I, II and T. On MW/LW, you can store six stations each. To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep. To recall a station: Select the desired waveband. On FM, also adjust the corresponding memory bank. Then press the relevant preset button briefly. Extra function preset buttons To store and recall a PTY programme type. On FM, you can store and recall one programme type on/from each preset button when PTY is active (“PTY” lights up in the display). Tape side selector Press this button to switch over to the other side during tape operation. The display shows “TR 1” or “TR 2”. FB Dolby B NR* Press this button to play back a tape which has been recorded with Dolby-B noise reduction. When this button is pressed, „B“ lights up in the display. * Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation. „Dolby“ and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. G LD Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. LD on/off: Press the button. When the Loudness function is active, “LD” will light up in the display. See chapter “DSC programming” for more information. 34 Orlando DJ A gb 34 12.04.2001, 13:33 Uhr DEUTSCH ENGLISH J AUD To adjust the treble and bass frequencies with the rocker switch. NEDERLANDS ITALIANO I GEO To adjust the balance (left/right) and fader (front/rear) with the rocker switch. Extra function GEO Separate balance and fader settings for traffic messages. See chapter “Adjusting GEO for traffic messages and the warning beep”. FRANÇAIS H DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and preferences. See chapter “DSC programming” for more information. ESPAÑOL The last setting will be stored automatically. To switch off GEO: Press button once again. If the setting remains unchanged within four seconds, the display will switch back to the previous condition. The last setting will be stored automatically. To switch off AUD: Press button once again. If the setting remains unchanged within four seconds, the AUD setting will be terminated automatically. PORTUGUÊS Fader front Fader rear Balance left Balance right SVENSKA Treble + Treble – Bass – Bass + 35 Orlando DJ A gb 35 12.04.2001, 13:33 Uhr Important notes Precautions Installation Accessories Before starting to use your new car radio, please read the following information carefully. If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection. In order to ensure that the set operates properly it is necessary that the positive power supply line is connected via the ignition and the permanent +12 V lead. Do not ground the loudspeaker outputs! Use only the accessories and spare parts approved by Blaupunkt. Traffic safety As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the radio. Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly. Therefore, you should always select a moderate volume for playing your car radio while you are driving. You can use the following Blaupunkt products with this car stereo: Remote control With the infrared remote control RC 05 you can control all of the important functions of your car hi-fi system from the steering wheel. Telephone mute If you have a mobile telephone installed in your vehicle, radio, tape or changer playback can be muted automatically when using the phone (telephone mute). “PHONE” will then appear in the display. When TA is active, traffic messages will always have priority. The announcement will be aborted by pressing the TA button. Amplifier All Blaupunkt amplifiers 36 Orlando DJ A gb 36 12.04.2001, 13:33 Uhr • Turn on the set. Introduce the KeyCard into the slot with the contact area showing up (KeyCard tongue sticking out). The car radio is now ready for operation. If a wrong KeyCard is inserted, then “CARD Displaying the radio pass data “Training” a second KeyCard/ Replacing a KeyCard While operating the unit with the first KeyCard, you can “train” a second one to be also used with the set: • Insert the first KeyCard and turn on the set. • Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6 ...) and serial number indicated on the display panel. Please refer to chapter “DSC programming - READ KC”. Press the DSC button and select “LEARN KC” with / . 37 Orlando DJ A gb 37 12.04.2001, 13:33 Uhr ENGLISH FRANÇAIS ITALIANO Remove the first KeyCard and insert the new one while “CHANGE” is still being displayed. After the display indication “READY” or “LEARN KC”, • press DSC. Now you can also use the new KeyCard for operating your unit. A maximum of two cards can be used for the set. When trying to “train” a third one, the access authorisation for the KeyCard not used for the “training” process will be deleted automatically. NEDERLANDS Never pull out the KeyCard directly! • First, slightly push in the KeyCard. This releases the card and puts it in the proper position for being removed. • Now you can pull it out. • SVENSKA Removing the KeyCard • Press << or >>. The display will switch to “CHANGE”. • Push in the KeyCard. The card is released and put in the proper position for being removed. ESPAÑOL Putting the unit into operation ERR” will appear in the display. In this case please do not make any further adjustments. The system will switch off after approximately ten seconds. When inserting another card type (e.g. phone or credit card), the display will show “WRONG KC” for approximately two seconds. Remove the wrong card and introduce the correct KeyCard. After the display indications “CARD ERR” or “WRONG KC”: • Press ON to turn on the set. PORTUGUÊS This car radio is supplied with one KeyCard as standard, though it can also be operated with a second card. If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer. When using two KeyCards, the settings stored on the first card will be adopted. However, you can individually store the following functions: Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep volume. In addition, the settings activated before switching the radio off, such as the waveband, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity and VOL FIX will also remained stored. This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard. DEUTSCH KeyCard theft protection system Switching the audio source Short Additional Memory (S.A.M.) Optical indication for extra security The second KeyCard available from your specialised dealer offers you the possibility to read out any short information, which will be moved through the display, such as, for example, the phone number of your car dealer or the emergency call number of your automobile association. Please refer to chapter “DSC programming - READ KC”. The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available. Flashing KeyCard tongue radio, When the vehicle is stationary and the KeyCard removed, the KeyCard tongue can be switched to flash for extra anti-theft security. For this it is necessary that the positive power supply line and the permanent +12 V lead are connected such as described in the installation instructions. Be sure that “LED ON” is adjusted in the DSC mode. If required, please refer to chapter “DSC programming - LED”. tape, Using the SRC button you can switch between the following audio sources: changer. Tape operation is only available if a cassette is inserted. To switch to another source, • press SRC briefly. Turn On Message (T.O.M.) The second KeyCard available from your specialised dealer also allows you to display a special turn-on message each time the radio is switched on. The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available. The programmed text will be displayed each time you turn on your system with the second KeyCard. Switching off the flashlight The flashlight can be switched off by pushing in the KeyCard and lock. If you would like to deactivate the flashing tongue with general effect, adjust the relevant item in the DSC menu to “LED OFF”. Care of your KeyCard For a proper function of the KeyCard it is important that the contacts are free from any foreign particles. Avoid direct skin contact. If necessary, clean the KeyCard contacts using a cotton swab soaked with alcohol. 38 Orlando DJ A gb 38 12.04.2001, 13:33 Uhr In order to switch this function on or off, • press the AF button briefly. While searching for the strongest reception signal, the radio may switch to mute briefly. With this car radio you can select between the following wavebands: FM 87.5 - 108 MHz MW 531 - 1602 kHz LW 153 - 279 kHz • Select the desired waveband by pressing the FMT or M•L button. To toggle between MW and LW: • Press M•L. Station tuning Automatic tuning 39 • Press / ; the car radio will automatically search for the next station. When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction. 12.04.2001, 13:33 Uhr DEUTSCH ENGLISH FRANÇAIS / 39 Orlando DJ A gb ITALIANO Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany SchleswigHolstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to one programme and move to an area where another linked regional programme becomes stronger, the unit will switch to that programme. If you wish to continue listening to the first programme, • press the AF button for approximately two seconds. “REG ON” appears in the display. Selecting a waveband SVENSKA The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when “AF” appears in the display. REG - regional programme If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to “REG OFF”. • Press the AF button for approximately two seconds until “REG OFF” appears. “REG ON” or “REG OFF” will be briefly displayed each time the radio is switched on. ESPAÑOL AF - Alternative frequency If “SEARCH” appears in the display when switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency. “SEARCH” will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the reception quality of the selected programme becomes too bad: • Tune into another station. PORTUGUÊS The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: NEDERLANDS Radio operation with RDS (Radio Data System) Scrolling through the broadcasting networks (only FM) • Press the FMT button as many times until the desired memory bank lights up in the display. If necessary, deactivate these functions: • Press AF or PTY. You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ... For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display). For this purpose, you may start Travelstore seek operation: • Press FMT for two seconds; the system starts to run through the frequency band. If “AF” does not light up, • press AF. With this, the requirements for selecting stations with << >> are fulfilled. Manual tuning: Changing the memory bank (FM) Notice: • You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. Seek tuning Up Down Down in short intervals (“AF” must be switched off) Up in short intervals (“AF” must be switched off) Manual tuning with << >> You can also tune in a station manually. Condition: AF and PTY must be switched off (i.e. the symbols do not light up in the display). Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up. Storing stations On FM, you can store six stations on the preset buttons 1-6 for each of the memory banks I, II and T. On MW/LW, you can store six stations each. • Select the appropriate waveband with FMT or M•L. • Tune in a station with the rocker switch (either automatically / or manually << >>). • Press the desired preset button until the radio resumes play after the muting (takes approximately two seconds, confirmed by beep). Now the station has been stored. The activated preset button is indicated in the display. Should you tune in a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will briefly flash in the display. 40 Orlando DJ A gb 40 12.04.2001, 13:33 Uhr You can recall any stored station at the touch of a button. • Select the waveband by pressing FMT or M•L. On FM, also choose the corresponding memory bank by pressing the FMT button as many times until the desired bank appears in the display. • Scanning stations with RadioScan You can also scan all stations which can be received. To start the Scan function: • Press SC briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process “FM-SCAN” or “AM-SCAN” will be displayed. The scan time can be changed from between five to a maximum of 30 seconds. Please refer to chapter “DSC programming - SCANTIME”. Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity). If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity). The sensitivity level can be altered in both modes (see also chapter “DSC programming”). Press the corresponding preset button briefly to recall the station. 41 Orlando DJ A gb 41 DEUTSCH ENGLISH FRANÇAIS ITALIANO To select a scanned station and switch off Preset Scan: • Press SC briefly. Changing the scan time NEDERLANDS To start Preset Scan: • Press SC for approximately two seconds. All of the stored stations of the adjusted waveband will be scanned one after the other. The memory bank and preset position of the currently scanned station will flash in the display. SVENSKA Recalling stored stations You can have all of the stored stations briefly scanned on all wavebands. To select a scanned station and switch off the Radio-Scan function: • Press SC briefly. If no station is selected, the scan function will be automatically switched off after the frequency band has been run through completely. The unit will tune in the station listened to before starting the scan. ESPAÑOL You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. • Press the FMT button for two seconds. “T-STORE” will appear in the display. The six strongest FM stations will be automatically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manually on the Travelstore bank (see “Storing stations”). Scanning stored stations with Preset Scan PORTUGUÊS Automatically storing the strongest stations with Travelstore 12.04.2001, 13:33 Uhr Switching from stereo to mono (FM) If reception is poor, you may get better sound quality by switching to mono: • Press the lo button for approximately two seconds. With mono playback, the stereo sign will disappear from the display. Each time the radio is switched on, stereo playback is activated. The unit will automatically switch to mono if the received signal is not strong enough for stereo playback. PTY – Programme Type PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off • Press PTY. When the function is active, the programme type selected last will briefly appear in the display. “PTY” will be permanently indicated in the lower right corner of the display panel. Programme type Use << >> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6. Condition: PTY must be active. Using DSC you can choose between German and English (see “DSC programming PTY LANG”). All of the programme types listed below are available. The letters printed in bold are identical to the actual short-time indication in the display. NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music) Checking the programme type of the station • Press PTY for approximately two seconds. After the beep tone the display will show the programme type offered by the tuned in station. If “NO PTY” appears in the display, the current station has no PTY code. Displaying the selected programme type • Press << or >>. The programme type selected last will be displayed briefly. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. • Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds. If you wish to listen to a station with this PTY, • press / eration. PTY 16 to PTY 30 are not yet assigned. 42 Orlando DJ A gb 42 12.04.2001, 13:33 Uhr to start seek tuning op- • During this period press >> (forwards) or << (backwards) to select the desired type. Press << or >> as many times as required. If you wish to listen to a station offering the selected PTY, press / to start seek tuning operation. If the system is unable to find a station offering the selected programme type, the display will show “NO PTY” and a beep tone • Select a programme type using buttons << >> and • hold down the desired preset button (1-6) until you hear a beep. Now the selected programme type can be recalled by pressing this preset. For this the PTY function must be active. - Station tuned in: NDR3. - “PTY” lights up in the display. - Programme type “POP” selected. Scanning stations with PTY-SCAN - Seek tuning is started. Condition: “PTY” must appear in the display. - • Press the SC button. All received stations offering the selected programme types will be scanned. No station with “PTY-POP” can be found. - The display shows “NO PTY” and - automatically switches back to NDR3. To switch off PTY-SCAN: • Press SC once again. - NDR2 airs a “PTY-POP” programme. - The system will switch to the linked station NDR2 for the duration of the “POP” programme. 43 Orlando DJ A gb 43 12.04.2001, 13:33 Uhr FRANÇAIS ENGLISH DEUTSCH Example: German broadcasting network NDR: ITALIANO • PTY is switched on and lights up in the display. No station offering the selected programme type can currently be received (with seek tuning or scan). The set will switch back to the previous station. As soon as a programme with such PTY can be received within the broadcasting network, the unit will switch over to the corresponding station for the duration of the programme. NEDERLANDS • Press << or >>; the programme type selected last will be displayed for three seconds. One programme type was assigned to each of the preset buttons 1-6 at the factory. If desired, you can also store other available programme types. To do so, make sure that “PTY” lights up in the display. • If necessary, press the PTY button to switch on the function. Situation: SVENSKA • Storing programme types PTY priority ESPAÑOL b) Using the << >> buttons of the rocker switch When PTY is switched on, you can select a programme type using buttons << >>. will be released. The station received before starting seek tuning will be tuned in. PORTUGUÊS If the system is unable to find a station offering the selected programme type, the display will show “NO PTY” and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to the next chapter “Storing programme types”. Receiving traffic programme stations with RDS-EON During tape or CDC operation, the set will also automatically switch to the programme offering the selected PTY within the broadcasting network. After the PTY programme the system will remain in the radio mode. Notice: As earlier mentioned, these functions are currently only supported by a limited number of RDS stations. The abbreviation “EON” stands for Enhanced Other Networks, meaning the exchange of information within a radio network. Many FM broadcasters offer traffic messages for their service area at regular intervals. All traffic programme stations transmit a special carrier signal alongside their programmes, which is decoded by your car radio. If this signal is identified, “TP” will appear in the display (Traffic Programme). In addition to these, there are also stations which do not actually transmit traffic programmes themselves, but by using RDSEON they offer the possibility to receive the traffic messages broadcast by another traffic programme station in the same radio network. If you wish to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR3), “TA” must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards. Traffic announcement priority on/off If the priority for traffic announcement programmes is activated, “TA” will light up in the display. To switch the priority on or off: • Press the TA button. When pressing TA while a message is being broadcast, this message will be interrupted. The unit will then switch back to the previous condition. The priority for other traffic messages remains active. Please note that several buttons have no function while a traffic announcement is broadcast. Warning beep If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approximately 30 seconds. This alarm tone will also be released when pressing a preset button which has no traffic programme allocated to it. 44 Orlando DJ A gb 44 12.04.2001, 13:33 Uhr • Press TA. “TA” will disappear from the display. Automatic seek tuning start (tape and CD changer operation) DEUTSCH Adjusting GEO for traffic messages and the warning beep You can separately adjust the balance and fader settings for both traffic announcements and the warning beep. For example, it is possible to listen to traffic reports via the front left (right) speaker only. This provides the driver with the important traffic information without bothering the rear passengers too much. To make a setting: • During an announcement, adjust the balance and fader settings to suit your personal preferences. PORTUGUÊS When leaving the reception area of the tuned in traffic programme station while listening to a tape or CD, the system will automatically start searching for a new TA programme. If no such station is found within approximately 30 seconds, tape or CD operation will be stopped and a warning beep will sound. To switch the warning beep off, proceed as described above. ENGLISH press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: FRANÇAIS • This volume was preset at the factory, though you can alter the value using the DSC function (see “DSC programming, TA VOL”). ITALIANO Press the rocker switch or NEDERLANDS • SVENSKA a) Tune into another station offering traffic information: Adjusting the volume for traffic announcements and the warning beep ESPAÑOL Switching the warning beep off 45 Orlando DJ A gb 45 12.04.2001, 13:33 Uhr Tape operation The car stereo has to be switched on. Fast Forward/Rewind portion of at least three seconds between the individual titles. The unit automatically switches to tape operation when a cassette is inserted. Switching the tape side (autoreverse) Inserting a tape • Turn on the set. • Insert a tape. The tape will be automatically transported to the playback position. Side A or 1 starts to play. During tape operation, “TR 1” or “TR 2” (track) will show on the display panel. Fast forward Fast rewind / Title selection (S-CPS) Stop function by pressing Insert the tape with side A or 1 facing up, the open side showing to the right. Up Down . Selecting titles with S-CPS (Super Cassette Programme Search) Use this function to skip ( ) and repeat ( ) recorded titles. A maximum of nine titles can be skipped. To do so, • press the rocker switch as many times as required. The number of titles to be skipped appears on the display panel. If necessary, you can correct your entry by pressing the opposite rocker switch button. . Stop by pressing For a proper operation of the S-CPS function there has to be an unrecorded tape Removing a tape • Press . The cassette will eject. To change the tape direction during cassette playback: . • Press At the end of a tape side, the mechanism changes directions automatically to play the other side (autoreverse). The display shows “TR1-PLAY” for track (side) 1 or “TR2-PLAY” for track 2. Notice: If there is too much tension on the tape during playback, the set may switch over by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely. Tape equalisation When a metal or CrO2 tape is inserted, the tape mechanism automatically adjusts to metal/CrO2 tape equalisation. The “MTL” indicator will illuminate. 46 Orlando DJ A gb 46 12.04.2001, 13:33 Uhr To switch on/off: • Press B (not during scan operation). * Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Listening to the radio during fast tape winding with RM (Radio Monitor) DEUTSCH When the tape is fast forwarded or rewound (also with S-CPS), the radio will normally be muted. To listen to the radio during fast winding, activate the Radio Monitor function. To switch RM on and off: • Press RM. When the function is active, “RM” will light up in the display. SVENSKA With this unit you can play back tapes recorded with Dolby-B NR or without noise reduction. Cassette tapes recorded with Dolby NR* stand out by their reduced tape hiss and the improved dynamics. If Dolby-B NR is switched on, “B” will light up in the display. ESPAÑOL Dolby B NR* To switch the Blank Skip function on and off: • Press the RM button for approximately one second until you hear a beep. When the function has been activated, “BLS” will appear in the display. PORTUGUÊS To start/stop the scan function: • Press the SC button briefly. You can individually adjust the scan time in the DSC menu (see “DSC programming SCANTIME”). To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 °Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions. Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) soaked with alcohol. Do not attempt to clean by inserting a hard object into the player! 47 Orlando DJ A gb 47 ENGLISH This function senses an unrecorded tape portion continuing for more than 15 seconds and automatically fast forwards the cassette to the beginning of the next track. During fast tape winding, “B-SKIP” will be indicated on the display panel. FRANÇAIS You can have the cassette titles played briefly by using the scan function. If you like a title, stop the scan to continue listening to that track. Care notes ITALIANO Skipping unrecorded tape portions with Blank Skip NEDERLANDS Scanning cassette titles with SCAN 12.04.2001, 13:33 Uhr CD changer control A05 Switching to CDC operation MIX playback Selecting the display mode Make sure that at least one CD has been inserted into the magazine. You can have the CD tracks played in random order. You can select the desired display mode for CD operation: Press SRC to go through the available audio sources: • Press as many times until the display briefly shows “CDC ON”. MIX CD “NAME” – The specified name, for example “MADONNA” will be displayed. “TIME” – The elapsed playback time of the title is displayed, for example “2 : 32”. Selecting CDs and titles – The titles of the selected CD will be played at random. The next disc will be selected in numeric order. MIX MAG – All CD titles will be played at random. The next disc will then also be selected and played randomly, etc. MIX OFF – The Mix function is deactivated. Discs and titles will be selected in numeric order. To alter the setting: • Press MIX as many times until the desired function is briefly displayed. If the function is active, “MIX” will appear in the right display corner. CD selection Up Down Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. “NUMBER” – The CD position in the magazine (disc number) is displayed, for example “CD8 T5”. To switch the display mode: • Press DIS during CD playback. The display mode and the corresponding setting or value will briefly show on the display panel, e.g. “TIME”, “2 : 32”. If you have selected “NAME” without having specified a name for the corresponding disc, “CD PLAY” will appear in the display. Please read also the chapter “Entering CD names”. Downwards: Press as many times as required. To restart a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed. 48 Orlando DJ A gb 48 12.04.2001, 13:33 Uhr SCAN operation Use this function to scan all of the CD tracks. To start the Scan function: • Press SC. The titles will be scanned one after the other in ascending order. To stop the Scan function: • Press SC briefly. The track currently being scanned is continued to be played. SCAN will also be terminated by • pressing one of the buttons AUD, GEO, DSC, SRC, , << >> or / . To start the entry: • Press the DSC button. “CDC-NAME” will be displayed. • Press . The first underscore character will flash. • Select the first character with the help of the rocker switch / . You have the choice between the capital letters A to Z, special characters and the numbers 0 to 9. • Use the rocker switch << >> to move to the next underscore and select a character. You can select up to seven characters. Once you have completed the name as desired: in order to store it. • Press To quit the naming mode, • leave the DSC menu by pressing DSC. If you would like to name another CD, • select a new disc. You can change any existing name by entering and storing a new one (overwriting). • Press the DSC button. • Press / to select “CDC UPD”. 49 Orlando DJ A gb 49 12.04.2001, 13:33 Uhr ENGLISH DEUTSCH • Press << >>. After the update has been completed, “NEXT MAG” appears in the display. • Press the button on the changer for approximately two seconds. The magazine will eject. • Insert the next magazine. Proceed as described above for all of the CDs/magazines for which the entered name is to be maintained. • After having updated the last magazine, press . To quit the function, • press DSC. The system has saved the name information for all of the CDs which were inserted. For all other discs the CD names have been deleted. FRANÇAIS Hold down the DIS button until you hear a beep. ITALIANO • You can delete a CD name with the help of the DSC update function. Use “CDC UPD” to confirm all of the CDs for which the specified name is not to be deleted. • Insert a magazine with CDs for which the stored information is to be maintained. NEDERLANDS You can name up to 99 discs. The specified name (e.g. VIVALDI) will then appear in the display. Be sure to select the display mode “NAME” using the DIS button. SVENSKA You can store your preferred display mode which will then be active each time the radio is switched on. If required, • press DIS as many times until the desired setting is displayed. Deleting CD names with DSC-UPDATE ESPAÑOL Entering CD names PORTUGUÊS Storing the display mode DSC programming DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. If you wish to alter any of the programming, • press DSC. button to Use the rocker switch and the select and adjust the functions described in the following. The display will show you the adjusted condition. / << >> Select function Adjust/recall value CDC NAME Only available for CD changer playback. Use this function to name your CDs. (See “Entering CD names”). SPEECH LOUDNESS Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. LOUD 1 - Low boost LOUD 6 - Max. boost TA VOL To adjust the traffic announcement and warning beep volume from between 0 to 63. The message will then come through at this volume, if the standard volume is lower. Should the standard volume be higher than the TA VOL level, then the traffic report will be played slightly louder than the standard volume. 50 Orlando DJ A gb 50 12.04.2001, 13:33 Uhr In future many RDS radio stations will differentiate between music and speech programmes. You can alter the tone for speech programmes from between “SPEECH 0 ... 4”. SPEECH 0: Music/speech off SPEECH 1: Linear reproduction (bass, treble and Loudness set to “0”) SPEECH 2-4: Different settings for volume, bass and treble with the Loudness being switched off. Try out which SPEECH setting you like most. LED ON Here you can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when the unit has been switched off and the KeyCard removed. LEARN KC To “train” a second KeyCard. Please read the information in chapter “KeyCard theft protection system - “Training” a second KeyCard”. DEUTSCH To select the programme type language: DEUTSCH or ENGLISH ENGLISH PTY LANG FRANÇAIS You can adjust the display brightness from between 1 to 16. You can also select different values for day and night. Selecting the night brightness: Switch on the vehicle lights and programme the brightness value. The car radio’s lighting connector must be hooked up to the vehicle’s electric system for this to function properly. green .............. light orange ................. red ITALIANO BRIGHT To read out the KeyCard data. The card supplied with the radio is used to display the model name, type number (7 6..) and the serial number. With the extra card it is possible to display the Short Additional Memory (S.A.M.) data entered by your specialised dealer. See chapter “Short Additional Memory S.A.M.”. If you remove the KeyCard during the reading process, “READ KC” will show on the display panel. The unit continues to play but does not accept any operations except from being switched off. Re-insert the card. NEDERLANDS Use this setting to alter the viewing angle to your liking from -1 to 0 to +1. READ KC PORTUGUÊS ANGLE COLOUR (Variocolour) For gradually matching the radio illumination with the dashboard lighting. SVENSKA Acknowledgement tone for all functions which require a button to be pressed for more than one second. The volume can be adjusted from between 0 to 9. (0 = off). ESPAÑOL BEEP 51 Orlando DJ A gb 51 12.04.2001, 13:33 Uhr SCANTIME S-DX S-LO Use this function to set the scan time for the radio or CD player from between five and 30 seconds. To adjust the seek tuning sensitivity for distant reception. DX 1 - high sensitivity DX 3 - low sensitivity To adjust the seek tuning sensitivity for local reception. LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be separately set for AM and FM. CDC UPD VOL FIX Use this function to delete CD names during CDC operation, in order to have more storage capacity for new discs available. See “Deleting CD names with DSC-UPDATE”. Use this function to select the volume at which the radio is set when it is switched on. Adjust the desired volume level with << >>. When adjusted to “VOL 0”, the system will come on with the volume selected before switching the radio off. To quit the DSC programming mode and store the adjustment: • Press DSC. Overview of the DSC factory settings CD NAME LOUDNESS TA VOL SPEECH BEEP ANGLE BRIGHT COLOUR LED LEARN KC READ KC PTY LANG SCANTIME S - DX S - LO CD UPD VOL FIX 52 Orlando DJ A gb 52 12.04.2001, 13:33 Uhr 3 35 0 4 0 16 green ON ENGLISH 10 sec. 1 1 0 DEUTSCH Appendix Specifications 0.9 µV at 26 dB signal-to-noise ratio FM frequency response: 30 - 16 000 Hz Tape player Frequency response: 30 - 18 000 Hz ENGLISH - Then call the following chargeable phone number: 01 80 / 5 25 56 66. - Using the area code to be entered you will be automatically given the address and phone number of the next Blaupunkt service centre. You can also request this information by fax. PORTUGUÊS ESPAÑOL CD player Frequency response: 5 - 20 000 Hz Subject to modifications! 53 Orlando DJ A gb FRANÇAIS If you would like to know the address of the next Blaupunkt service centre of your area without having our service list at hand: - Find out your area code. ITALIANO FM sensitivity: 87.5 – 108 MHz 531 – 1602 kHz 153 – 279 kHz Address of the next service centre in your vicinity (only for Germany) NEDERLANDS Tuner Wavebands: FM : MW : LW : 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V 4 x 35 W max. power Blaupunkt telephone hotline SVENSKA Amplifier Output power: 53 12.04.2001, 13:33 Uhr