BloomSky BLOOM1 BLOOM User Manual Confidential Rev1

BloomSky, Inc. BLOOM Confidential Rev1

Confidential_User Manual Rev1

BloomSkyTMBLOOM1 OWNER’S MANUALIntroductionThis manual will guide you through the setup procedures and highlight BloomSky’s keyfeatures.Package ContentszOne indoormodulezOne poweradaptorzOne quick startmanualIntended UseThe BLOOM1 is designed to allow you to monitor indoor temperature and humidity. The datawill display on the screen of the device and be send to the cloud by Wi-Fi as well. User canobtain these data anywhere by BloomSky APP .RequirementsziOS version 7.0 orhigherzAndroidversion 4.0 orhigherSetup ProceduresStep 1:
Install the BloomSky APPStep 2:Connect the BLOOM1 to your wall outlet. Waiting for about 3 seconds, The screen willdisplay temperature and humidity data.Step 3:Launch the BloomSky app, and follow the on-screen instructions  to create an accountand register the BLOOM1. After that the BLOOM1 will connect to your Wi-Fiautomatically and upload data every 5 minutes.Key operation:Key：Button: Press this button more than 5 seconds to clean the Wi-Fi information whenthe device is powered on.Display:zIn this situation, the device can’t connect to server successfully. Please confirm yourWi-Fi password is correct and DHCP function is enabled and Wi-Fi is not workingin 5 GHz brands.Technical SpecificationszModel: BLOOM1zClassification: External power
zPower Adapter Model: 100-240V~50/60Hz Output: DC 5V--- 1AzWLAN Standard: Single-band 2.4GHz IEEE 802.11b/g/nzFrequency Range: 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band)zNumber of Channels: 2.4GHz:Ch1 ~ Ch11zBuilt-in temperature and humidity sensor with excellent accuracy.zTemperature display outdoor and indoor.zF° /C° temperature unit switchable.zPowered by A/C AdapterzDesktop placingzRelative Humidity Precision :± 4% RH (max), 0–80% RHzTemperature Accuracy: ±0.4 °C (max), –10 to 85 °CGeneral Safety and Precautions1. Read all of the information in the owner’s manual and other included product informationin the packaging before operating the product.2. The BLOOM1 will not operate within a Faraday cage.3. This device complies with the essential requirements and other60950‐1:2006+A11:2009+A1:2010+A12:2011.Statements:This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference thatmay cause undesired operation.Cet appareil est conforme à la section 15 des réglementations de la FCC. Lefonctionnement de l’appareil est sujetaux deux conditions suivantes :(1) cet appareil ne doit pas provoquer d’interférences néfastes, et(2) cet appareil doit tolérer les interférences reçues, y compris celles qui risquentde provoquer un fonctionnement indésirable.
Note: This product has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This product generates, uses, and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this product doescause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Please take attention that changes or modification not expresslyapproved by the party responsible for compliance could void theuser’s authority to operate the equipment.This equipment should be installed and operated with a minimumdistance 20cm between the radiator and your bodyCet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur etvotre corpsThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that maycause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radioexempts de licence. L'exploitation est autorisée aux deuxconditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d'en compromettre le fonctionnement.Under Industry Canada regulations, this radio transmitter may only operateusing an antenna of a type and maximum (or lesser) gain approved for thetransmitter by Industry Canada. To reduce potential radio interference to otherusers, the antenna type and its gain should be so chosen that the equivalentisotropically radiated power (e.i.r.p.) is not more than that necessary forsuccessful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radiopeutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risquesde brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir letype d'antenne et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'unecommunication satisfaisante.Care and Maintenance1. Do not attempt to disassemble the device.2. Clean the product with a soft damp cloth. Do not use abrasive or solvent‐based cleaners.Warranty Information1. For detailed operating instructions and updates, please visit www.bloomsky.com .Ourproducts come with a 1‐year warranty in general in all countries, or a 2‐year warrantywhere is required by your local Consumer Law. No warranty may be excluded under yourlocal Consumer Law. The warranty becomes void if any components of the system areopened by non‐qualified technicians. You are entitled to a replacement or refund for amajor failure of the product. You are also entitled to have goods repaired or replaced if thegoods fail to be of acceptable quality and the failure does not amount to major failure.Please refer to the Warranty or Terms and Conditions for more details.Explanation of SymbolsSymbol for the “Owner’s Manual – Must be read”Symbol for “Caution”Symbol for “TYPE BF APPLIED PARTS”Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should notbe disposed of with household waste. Please recycle where facilities exist. Check with yourlocal Authority or retailer for recycling advice.”Manufactured for iSmart Alarm, Inc.723 N.Shoreline Blvd,Mountain View,CA 94043www.bloomsky.comBloomSky is the trademark of BloomSky, Inc.iPhone is a trademark of Apple Inc. registered in the U.S. and other countries.Android is a trademark of Google Inc.©2015 BloomSky, Inc. All rights reserved.

Navigation menu