Blue Yeti Quick Start Guide EN
2018-06-05
: Bluemic Blue Yeti Quickstartguide-En Blue_Yeti_QuickStartGuide-EN yeti manuals pdf
Open the PDF directly: View PDF .
Page Count: 5
Download | |
Open PDF In Browser | View PDF |
yeti PROFESSIONAL MULTI-PATTERN USB MIC FOR RECORDING AND STREAMING QUICK START GUIDE Congratulations on your purchase of the Yeti, the world’s #1 USB microphone! Featuring Blue’s innovative tri-capsule array, the Yeti lets you record with four unique patterns— stereo, cardioid, omnidirectional, and bidirectional—offering you recording possibilities that usually require multiple microphones. Informed by Blue’s illustrious studio legacy, Yeti delivers dramatic, professional sound for podcasting, voiceover, Skype/VoIP, game streaming, vocals and instruments. There are no drivers to install—simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing. GETTING STARTED WITH YETI SOFTWARE SETUP After unpacking your Yeti, rotate the microphone 180 degrees so that the Blue logo and headphone volume control are facing you. Tighten the set-screws on the left and right of the base after adjusting the microphone to your desired angle. Connect Yeti to your computer with the supplied USB cable—the LED just above the Blue logo will glow red, indicating power has reached the mic. Whatever your favorite software is—Audacity, Garageband, iMovie, Ableton, Skype, you name it—Yeti will produce amazing results. Simply plug the mic into your Mac or PC, select Yeti as your recording input within your selected software, and start recording—no drivers required. It’s that easy. Yeti is a side-address microphone, which means you should speak, sing, and play into the side of the microphone with the Blue logo facing the sound source, not the top of the microphone. Now you can start recording and streaming in stunning audio quality. 2 For game streamers, Yeti is compatible with most popular live-streaming software programs including Discord, Open Broadcaster Software (OBS), XSplit, Gameshow and more. USING YETI WITH PC USING YETI WITH MAC 1. Connect to your PC using the provided USB cable. 1. Connect to your Mac using the provided USB cable. 2. From the Start menu, select the Control Panel. 2. Open System Preferences and select the Sound icon. 3. From the Control Panel, select the Sound icon. 3. Click the Input tab and select Blue Yeti. 4. Click the Recording tab and select Yeti. 4. Click Output tab and select Yeti. 5. Click the Playback tab and select Yeti. 5. From this screen, set the Output volume to 100%. (WINDOWS 7, 8.1, OR 10) (macOS 10.10 OR HIGHER) 3 GETTING TO KNOW YOUR YETI 1 1 TRIPLE CAPSULE ARRAY Three condenser capsules in an innovative configuration to enable great recordings in most any situation. MICROPHONE GAIN Control Yeti’s gain (sensitivity). Turn the knob right to increase the level, and left to reduce the level. 2 3 GAIN 2 4 3 4 4 MUTE BUTTON/STATUS LIGHT Press the mute button to mute/unmute. When muted, the LED status light will flash. 5 HEADPHONE VOLUME CONTROL Easily adjust Yeti’s headphone output by turning the volume knob. 6 HEADPHONE OUTPUT Yeti includes a standard 1/8” (3.5mm) headphone jack for monitoring and playback. Use Yeti’s headphone output to monitor your microphone recording in real time, without latency delays. 7 USB CONNECTION Yeti connects to your computer with one simple USB cable. 8 STANDARD THREAD MOUNT If you would like to mount your Yeti to a standard microphone studio mount, remove Yeti from the included desk stand and thread in a standard threaded mount. For broadcast applications, we recommend the Compass desktop boom arm. To isolate Yeti from noise, shock, and ambient vibration, add the Radius III shockmount. 5 6 8 Quickly select from Yeti’s four pattern settings (stereo, cardioid, omnidirectional, bidirectional) by rotating the pattern selector knob. PATTERN 7 MULTIPLE PATTERN SELECTION 5 SWITCHABLE POLAR PATTERNS TECHNICAL SPECIFICATIONS Power Required/Consumption: 5V 150mA Sample Rate: 48kHz Bit Rate: 16bit STEREO 1 2 Uses both the left and right channels to capture a wide, realistic sound image—ideal for recording acoustic guitar or choir. OMNIDIRECTIONAL Picks up sound equally from all around the mic. It’s best used in situations when you want to capture the ambience of “being there”—like recording a band’s live performance, a multi-person podcast or a conference call. CARDIOID Perfect for podcasts, game streaming, vocal performances, voiceovers and instruments. Cardioid mode records sound sources that are directly in front of the microphone, delivering rich, full-bodied sound. 4 BIDIRECTIONAL Records from both the front and rear of the microphone— good for recording a duet or a two-person interview. 100Hz 250Hz ˚ ˚ RESPONSE POLAR PATTERN FREQUENCY 5 315 +10 45 10 15 500Hz 20 +5 1kHz for the sound provided. How the microphone These charts are a starting point reacts in dB a particular 90 application will differ depending on sound source, ˚ 2.5kHz orientation and distance from 4kHz sound source, room acoustics and other factors. For more tips on miking and recording techniques, check out bluedesigns.com. 8kHz 25 ˚ 270 dB -5 -10 ˚ 225 70 100 6 3 500 1kHz 5kHz 10kHz 15kHz ˚ 135 ˚ 180 16kHz Capsules: 3 Blue-proprietary 14mm condenser capsules Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo Frequency Response: 20Hz - 20kHz Sensitivity: 4.5mV/Pa (1 kHz) Max SPL: 120dB (THD: 0.5% 1kHz) Dimensions - mic with stand L : 4.72” (12cm) W: 4.92” (12.5cm) H: 11.61” (29.5cm) Weight: 3.4lbs (.55kg) Headphone Amplifier Impedance: >16 ohms Power Output (RMS): 130mW THD: 0.009% Frequency Response: 15Hz – 22kHz Signal to Noise: 100dB SYSTEM REQUIREMENTS PC Windows 7, 8.1, 10 USB 1.1/2.0/3.0* MAC macOS (10.10 or higher) USB 1.1/2.0/3.0* For best performance, plug Yeti directly into your computer’s USB port. Avoid using a USB hub. *Please see bluedesigns.com for more details WARRANTY Blue Microphones warrants its hardware product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of original retail purchase, provided the purchase was made from an authorized Blue Microphones dealer. This warranty is void if the equipment is altered, misused, mishandled, disassembled, maladjusted, suffers excessive wear, or is serviced by any parties not authorized by Blue Microphones. The warranty does not include transportation costs incurred because of the need for service unless arranged for in advance. Blue Microphones reserves the right to make changes in design and improve upon its products without obligation to install these improvements in any of its products previously manufactured. For warranty service, or for a copy of Blue’s Warranty Policy, including a complete list of exclusions and limitations, contact Blue at 818-879-5200. In keeping with our policy of continued product improvement, Baltic Latvian Universal Electronics (BLUE) reserves the right to alter specifications without prior notice. www.bluedesigns.com Designed in USA. Made in China. 7 REV C PRODUCT REGISTRATION Please take a moment and register Yeti with us. It’ll only take a minute and we guarantee you’ll sleep better at night. As our way of saying thanks we’ll provide you with: FREE PRODUCT SUPPORT OFFERS FOR DISCOUNTS ON OUR WEBSTORE* MORE COOL STUFF PLEASE REGISTER AT: BLUEDESIGNS.COM *Not available in all regions—check web site for details. BLUEDESIGNS.COM ©2018 Blue Microphones. All rights reserved. Blue Logo Oval are registered trademarks of Blue Microphones, LLC. Mac, Macintosh, GarageBand and iMovie are trademarks of Apple Inc., registered in the U.S. and other countries. Windows 7, Windows 8.1, Windows 10 and Skype are registered trademarks of Microsoft, Inc. YouTube is a trademark of Google LLC. Audacity is a trademark of Dominic Mazzoni. Ableton is a trademark of Ableton AG. Discord is a trademark of Discord, Inc. XSplit Broadcaster is a trademark of Splitmedialabs Limited. Gameshow is a trademark of Telestream, LLC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2018:05:31 14:29:39-07:00 Creator : Adobe InDesign CC 13.1 (Macintosh) Modify Date : 2018:05:31 14:29:39-07:00 Title : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2018:05:31 14:29:39-07:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Format : application/pdf Document ID : uuid:c46d63af-547e-504f-98cc-c73268555bcb Instance ID : uuid:9323828f-d99f-604f-98f0-864f7fbe658c Producer : Adobe PDF Library 15.0 Page Count : 5EXIF Metadata provided by EXIF.tools