Bluetake Technology BT007SX Bluetooth Class 1 EDR USB Adapter User Manual BT007X BT009X Quick Setup Guide

Bluetake Technology Co., Ltd. Bluetooth Class 1 EDR USB Adapter BT007X BT009X Quick Setup Guide

Users Manual

Few contents of software CD are different according to
particular product user purchased.
1. Please insert the Utility CD into your CD-ROM drive, and
then follow the instruction below to install Bluetooth
software: (Note! DO NOT plug the USB Dongle/Adapter
into the USB port before software installation)
Note: If the Auto-Run function of CD-ROM is enabled (in Windows, the
default setting of this function is usually enabled), then installation program
will start automatically. If not, you can utilize the Windows Explorer to browse
CD content and execute autorun.exe manually.
2. Follow the directions on your screen to install the
software.
1. Choose setup language
2. Initiate and follow up the setup processes
3. Finish the setup and reset the computer
3. As prompted, when software installation is complete,
restart your computer.
Insert BT007SX / BT009SX
[Windows XP/2000 operating system]
Software Installation
1. After the computer is restarted, you can see the shortcut
icon of BlueSoleil is added and the main window of
BlueSoleil is opened on the Windows desktop. Then, the
message popped up at the Windows toolbar will notify you
to insert the Bluetooth USB adapter.
2. Insert the USB adapter into the USB port of your
computer.
3. The Found New Hardware Wizard will automatically start.
Select “Install the software automatically
(Recommended)” and then follow the wizard to install the
Bluetooth USB adapter’s drivers.
[Windows XP SP2 operating system]
1. After the computer is restarted, you can see the
shortcut icon of BlueSoleil is added and the main
window of BlueSoleil is opened on the Windows
desktop. Then, the message popped up at the
Windows toolbar will notify you to insert the Bluetooth
USB adapter.
2. Insert the USB adapter into the USB port of your
computer.
3. The Hardware Update Wizard will automatically start
and install the BT007SX / 009SX driver, after driver is
installed, a “Bluetooth started” screen will shown on
your task bar.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.-Consult the
dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. Any Changes or
modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this
equipment.
BT007SX
Class I EDR USB Adapter
BT009SX
Class II EDR USB Adapter
www.bluetake.com
Quick Setup Guide
Taiwan Headquarter
Tel: +886-2-2664-7199
E-mail: sales@bluetake.com
USA, California
Tel: +1-626-369-9888
E-mail: usa@bluetake.com
Mexico
Tel: +52-55-3096-5321
E-mail: mexico@bluetake.com
Japan, Tokyo
Tel: +81-424-42-8268
E-mail: japan@bluetake.com
Sxngapore
Tel: +65-6743-2300
E-mail: spore@bluetake.com
Hong Kong
Tel: +852-9777-8785
E-mail: hk@bluetake.com
- For more detailed description of Bluetooth
products application, please refer to the
User Manual that locates in Utility CD.

Navigation menu