Bluetake Technology BT460RX2004512 BT460 Audio Station Receiver User Manual

Bluetake Technology Co., Ltd. BT460 Audio Station Receiver

User Manual

Download: Bluetake Technology BT460RX2004512 BT460 Audio Station Receiver User Manual
Mirror Download [FCC.gov]Bluetake Technology BT460RX2004512 BT460 Audio Station Receiver User Manual
Document ID459970
Application IDp89J0k24FTmi05lX65y6fg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.74kB (346806 bits)
Date Submitted2004-08-16 00:00:00
Date Available2004-08-12 00:00:00
Creation Date2004-06-28 02:46:07
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2004-08-05 09:28:47
Document TitleUser Manual

Contents
General Information………………………………………………….2
Hardware introduction………………………………………………………………2
Accessories……………………………………………...……………………………. 3
Safety information……………………………………………………………………3
Application……………………………………………………………. 4
PC environment……………………………………...………………………………4
5.1 home theater system……………………………………………………………4
PC stereo speaker……………………………………………………………………4
DVD player……………………………………………………………………………4
Audio player……………………………………………………………………….......4
Operation…………………………………………………………….. 5
Power connection…………………………….………………………………………5
Single cable………………………………………………...…………………………5
Placement and Antenna angle………………………………………………………5
Turning on the transceiver/receiver……………………………...…………………6
Pairing………………………………………………………………...……………….6
Turning on the amplifier…………………………………………...…………………7
Volume control……………………………………………………………………...7
Connection & Disconnection…………………………………………..……………7
Playing music or video………………………………………………….……………8
Specifications………………………………………………………49
-1-
General Information
Hardware introduction
Transceiver
1. Antenna
2. Power Button
3. Pairing Button
4. Transceiver
5. LED
6. RCA connector
7. DC jack
Receiver
1. Antenna
2. Power Button
3. Pairing Button
4. Receiver
5. LED
6. RCA connector
7. DC jack
Amplifier
1. Amplifier
2. Input: RCA connector
3. Volume control
4. Power Switch
5. DC jack
6. DC 5V Output
7. Output: Speaker connector
-2-
Accessories
Safety information
Don’t use this system in Emergency system, Hospital, Airplane and Outdoor.
Please place this system on a flat, stable and hard surface.
Keep away from the strong radio system to make sure the single quality.
Don’t put receiver on the speaker to reduce the interference.
-3-
Application
PC stereo system
Home theater system
DVD player
Audio player
-4-
Operation
Power connection
Before connecting the AC Adapter to the outlet, please
ensure local power line voltage. Plug the AC adapter to the
outlet then connect the AC adapter to the DC jack on the
rear side of the Transceiver / Receiver / Amplifier.
Single cable
Connect the RCA cable to the RCA connecter on the rear
side of Transceiver / Receiver.
For the Transceiver, the other end to an available DVD
player, Home theater system or PC…….
For the Receiver, the other end to an available Amplifier
RCA connector.
Placement and Antenna angle
Please see figure to adjust the antenna angle.
-5-
Turning on the transceiver / receiver
Press the power button on transceiver/receiver. The LED indicator will light blue to indicate that
Transceiver/Receiver is working.
Pairing
Please follow the below instruction to pair the Transceiver and receiver:
1. Press and hold the pairing button on Transceiver or receiver for 2-3sec until the LED starts to
flash.
2. Release the pairing button after the LED is flashing, the status indicates the transceiver or receiver
is in pairing mode.
3. After 2-3 sec the LED stops flash light. That means the pairing process is finished. The transceiver
and receiver will return to normal status.
-6-
Turning on the amplifier
The blue LED will start to lighten as soon as the power switch in back of amplifier is turned on.
p.s. Please twist (or twiddle) the knob to the low volume before turn on the power.
Volume control
The volume control switch is in back of amplifier. Please twist (or twiddle) the knob to the low volume
at first. Then adjust the sound to the comfortable level after play the music or video.
Connection & Disconnection
You can press the pairing button of transceiver to stop the music or sound. To return the music and
sound, please press the pairing button again.
-7-
Playing the music or video
Before playing the music, please ensure the transceiver has already been paired with receiver
Turn on the Transceiver, receiver and amplifier. Play the music or video. And then you will hear the
music or sound from speaker.
Transceiver and receiver
LED introduction
Interval
Standby/disconnect
Blue
on
Connection
once
3sec
Pairing
once
0.5sec
Button and switch introduction
Pairing
Power Switch
Function
Process
Pairing
Press the Pairing button and keep it pressed for about
3 sec until the blue and red indicators flash alternately
Interrupt Radio Signal Press once to stop signal. Press once again to return it.
Power on
Power turn on
Power off
Power turn off
-8-
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:06:28 02:46:07Z
Modify Date                     : 2004:08:05 09:28:47+08:00
Page Count                      : 9
Creation Date                   : 2004:06:28 02:46:07Z
Mod Date                        : 2004:08:05 09:28:47+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2004:08:05 09:28:47+08:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q5TBT460RX2004512

Navigation menu