Blum Novotest RCA Radio Receiver for Measuring Probe User Manual 306600011 EN V3
Blum Novotest GmbH Radio Receiver for Measuring Probe 306600011 EN V3
UserMan
RC66 Radio Receiver Radio transmission for touch probes Installation instructions English Type P03.6600-010 focus on productivity Content 1. Safety Rules................................................................................... 4 2. System Overview .......................................................................... 4 2.1 Description....................................................................................................... 4 2.2 Display Elements ............................................................................................. 6 2.3 Technical Data................................................................................................ 6 2.4 Area of Work ................................................................................................... 7 2.5 Complete System ........................................................................................... 7 3. Mechanical Installation ............................................................... 8 3.1 Mounting Variants........................................................................................... 9 4. Electrical Connection ................................................................ 12 5. Maintenance .............................................................................. 12 6. Order Numbers ........................................................................... 12 7. Radio Approval .......................................................................... 13 Installation instructions interface IF59-A2 (P03.5900-000.011) Keys: CAUTION Important advice for appliance protection Advice to secondary literature Additional advice Tip GN LED shines GN Green RD Red GN BU Blue LED flashes OG Orange VT Violet Abbreviations: Md Tightening Torque P03.6600-000.011 306600011_EN.docx by Blum-Novotest 2010 02.05.2011 version: V1A Original operating instructions Subject to technical change without any notice Safety Rules 1. Safety Rules CAUTION Risk of short-circuit Please separate connecting cable resp. plug connection off circuit only. 2. System Overview 2.1 Description The radio receiver is compatible with the BLUM measuring devices TC series (radio probes TC60, TC63-30). The receiver enables wireless communication between the measuring devices and the NC control. Data transfer to the NC control via IF59-A2 interface. RC66 1a Mode 1b 1c 90 ° 1d 1e IF59-A2 P03.5900-010-A2 Fig. 2.1 (1a) LED mode (2) cable (1b) LED battery (3) for mounting screws (1c) LED status (4) seal insert + O-Ring (1d) LED receive (at horizontal cable outgoing) (1e) LED transmit by Blum-Novotest 2010 System Overview 42 30 37 3,2 37 45 Mode Ø 3,3 M4 Ø6 Ø 44 max.Ø38 min. Ø20 9,5 Ø 6,3 Fig. 2.2 by Blum-Novotest 2010 System Overview 2.2 Display Elements LED LED colour function MODE (1a) Battery (1b) Status (1c) Standby BU Mode TC1 … TC6 VT Pairing procedure GN Battery o.k. RD Battery low GN Initial position RD Probe deflected off No reception GN Reception o.k. Mode Receive (1d) BUOG Mode Send command Transmit (1e) GN Tab. 2.1 2.3 Technical Data Protection class Power supply Weight Signal transmisson Frequency band: Transmission power Transmitter / receiver range Minimum bending radius Max. cable length Storage temperature Operating temperature IP68 12 V DC / 100 mA via IF59-A2 600 g Radio transmission 2,400 – 2,4835 GHz 0 dBm 15 m, see chap. 2.4 60 mm (application: flexible) 50 m -20 °C ... +70 °C +5 °C ... +50 °C Tab. 2.2 by Blum-Novotest 2010 System Overview 2.4 Area of Work TC60 Area of work: 75° 60° 45° 90° 16 14 RC66 Transmitter / receiver range: 75° 75° 60° 45° 12 10 30° 60° 12 10 30° 30° 15° 45° 15° 15° 0° 0° 15° 15° 30° 30° 45° 0° 15° 30° 45° 60° 45° 60° 75° 90° 16 14 90° 60° 75° 75° 90° Fig. 2.3 2.5 Complete System TC60 TC63-30 RC66 IF59 - A2 Aux Z-Nano Fig. 2.4 ⇒ Switch ON/OFF via radio signal ⇒ Signal transmission for TC series by Blum-Novotest 2010 Mechanical Installation 3. Mechanical Installation CAUTION Risk of short-circuit Damage by chips Never install cables and hoses without protection. Cables and hoses must always be protected against chips (protective hose, protection spring, cover etc.). CAUTION Risk of short-circuit Damage of the cable by sharp edges Pls. deburr the sharp edges on the cable bushing and mount edge protection! CAUTION • The system should be placed protected from coolant and chips. • Distance between probe and receiver: Pay attention to chap. 2.4 • Keep distance to other radio systems by Blum-Novotest 2010 Mechanical Installation 3.1 Mounting Variants Cable outgoing horizontal: Pollution of the system Mount gasket (9a) and O-ring (9b) 4a 4b Fig. 3.1 Cable outgoing vertical: Fig. 3.2 by Blum-Novotest 2010 Mechanical Installation Variant 1 Variant 2 M3 M4 Variant 3 (option) M6 P03.5600-010.080 4b 4a P03.5600-010.254 Fig. 3.3 (4a) (4b) (5) 10 seal insert O-Ring universal holder (option) Tightening torque: DIN912 M3x10: Md = 1,3 Nm (max.) DIN912 M4x10: Md = 3,0 Nm (max.) DIN912 M6x12: Md = 10,5 Nm (max.) Drilling template (scope of delivery) by Blum-Novotest 2010 Mechanical Installation Variant 3 Option Universal Holder P03.5600-010.080 Klemmschraube clamping screw DIN913 M4 (2x) Md = 1,5 Nm M6 Ø5,2 60° 27 19 8,5 22 16 Schwenkbereich swivel range Fig. 3.4 Variant 4: Option Front-Kit P03.6600-010.250 Pls. refer to the appropriate data sheet by Blum-Novotest 2010 11 Electrical Connection 4. Electrical Connection See installation instructions IF59-A2 5. Maintenance The receiver needs minimum maintenance only. Keep the receiver clean and free from chips. 6. Order Numbers Radio receiver RC66 - Cable length L = 10 m PUR L = 20 m PUR P03.6600-010-A2-10 P03.6600-010-A2-20 (8 wires) Front-kit P03.6600-010.250 Universal holder P03.5600-010.080 Heavy Duty Kit Protection spring 1m incl. screwing P03.5600-010.254 Interface IF59-A2 P03.5900-010-A2 12 by Blum-Novotest 2010 Radio Approval 7. Radio Approval Area: Radio Approval: Europe: 0681 Japan: R 202WW10568412 Regulations: EN 300 328 V1.4.1, EN 301 489-17 V1.2.1, EN 60950-1:2001 “This device has been granted a designation number by Ministry of Internal Affairs and Communications under „Ordinance concerning Technical Regulations Conformity Certification etc. of Specified Radio Equipment (特定無線設備の技術基準適合証明等に関する規則)“ Article 2-1-19. USA: FCC ID: ZCQRCA FCC Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada: IC:9570A-RCA Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with IC Canada RF radiation exposure limits set forth for an uncontrolled environment as per RSS-102 Issue 4. by Blum-Novotest 2010 13 EC Declaration of Incorporation acc. to the EC Machine Regulations 2006/42/EC in the edition from 17 May.2006 We hereby confirm that the subsequently following components are defined for the installation into other machines and that they are in accordance with the following safety requirements of the EC regulations. Commissioning is not allowed until it is ascertained that the machines, in which the components are installed, are in accordance with the EC regulations 2006/42/EC. The relevant technical information is compiled acc. to annex VII part B and, where appropriate, we will send the information concerning the components to the different countries. The industrial property rights of Blum-Novotest GmbH will remain unaffected. Component name: Safety requirements 2006/42/EG, Annex I Applied standards: EC-Regulations: P03.6600 Radio receiver 1.5.1 2004/108/EG 2006/95/EG 1999/5/EG Applied harmonized standards: EN61000-6 EN60204-1 EN ISO 12100 EN 300 328 EN 301 489-17 EN 60950-1:2001 Applied national standards: DIN VDE 0100 DIN VDE 0113 Authorised presentative for technical information: Blum-Novotest GmbH Kaufstr. 14 88287 Gruenkraut, Germany 14 by Blum-Novotest 2010 Service Order Please fill out completely this repair order and attach it to the system. This will save you and us costs due to time-consuming inquiries and ensures a quick repair. Blum-Novotest GmbH Kaufstr. 14, 88287 Gruenkraut/Gullen - Germany Tel. +49 751 6008-0, Fax. +49 751 6008-156 Company: Department: Contact: Address: Phone: Fax: Email: Probe Type, Serial No.: Machine Type, Manufacturer: Description of Defect: by Blum-Novotest 2010 15 focus on productivity Blum-Novotest GmbH Kaufstr. 14 88287 Gruenkraut, Germany Tel.:+49 751 6008-0 Fax:+49 751 6008-156 www.blum-novotest.com vk@blum-novotest.com Support Hotline: Vertrieb/sales: Tel.:+49 751 6008-200 Service LaserControl : Tel.:+49 751 6008-202 Service Messtaster/probes: Tel.:+49 751 6008-203 Blum-Novotest GmbH Prüftechnik Willich, Germany Tel. +49 2154 921970 KK Blum Laser Measuring Technology Nagoya, Japan Tel. +81 568 74-5311 Blum-Novotest Srl Como, Italy Tel. +39 031 283 955 Blum-Novotest Shanghai, China Tel. +86 21 52080480 Blum-Novotest Ltd. Birmingham, England Tel. +44 1543 257111 Blum Production Metrology Co., Ltd. Taichung, Taiwan Tel. +886 4 2358 3900 Blum Laser Measuring Technology Inc. Cincinnati, USA Tel. +1 859 3446789 Blum Production Metrology Pte. Ltd. Singapore, Singapore Tel. +65 62720998 Blum-Novotest Sarl Bordeaux, France Tel. +33 55702 0135 Blum-Novotest Ltd. Soul, Republic of Korea Tel. +82 2 2026-1300 Blum-Novotest s.r.o. Kroměříž, Czech Republic Tel. +420 573 330373 focus on productivity
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 16 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 47523eb5-772e-11e0-0000-6903d47183b9 Producer : GPL Ghostscript 9.0 Keywords : () Modify Date : 2011:05:02 17:42:13+02:00 Create Date : 2011:05:02 17:42:13+02:00 Creator Tool : PDFCreator Version 1.2.0 Document ID : 47523eb5-772e-11e0-0000-6903d47183b9 Format : application/pdf Title : 306600011_EN_V3 Creator : Haefele Description : () Author : Haefele Subject :EXIF Metadata provided by EXIF.tools