Bmw 2015 I8 Owners Manual

2015-04-13

: Bmw Bmw-2015-Bmw-I8-Owners-Manual-694708 bmw-2015-bmw-i8-owners-manual-694708 bmw pdf

Open the PDF directly: View PDF PDF.
Page Count: 224

DownloadBmw Bmw-2015-Bmw-I8-Owners-Manual-  Bmw-2015-bmw-i8-owners-manual
Open PDF In BrowserView PDF
Contents
A-Z

THE BMW i8.
OWNER'S MANUAL.

BMW i.
Online Edition for Part no. 01 40 2 960 891 - II/15

Online Edition for Part no. 01 40 2 960 891 - II/15

BMW i SUSTAINABILITY.

THE SPORTS CAR.
REINVENTED.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 1

15.01.14 17:53

THE SUSTAINABLE LIFE CYCLE OF BMW i.

01. DEVELOPMENT
• Lightweight carbon fiber construction
to minimize weight.
• Efficient drive technology and perfect
aerodynamics – resulting in less wind
resistance.

04. RECYCLING
• Re-use of battery modules, for example as
temporary storage units for solar energy.
• Recycling carbon fibers by returning them
to the production process.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 2

15.01.14 17:53

03. UTILIZATION
• Optimal efficiency thanks to the
innovative BMW eDrive technology.
• A combination of an electric drive
system for emission-free driving and
a BMW TwinPower Turbo engine for
maximum performance.

02. PRODUCTION
• Use of renewable electricity for
the production of BMW i vehicles.
• Reduction of energy and water
consumption in production.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 3

15.01.14 17:53

01. DEVELOPMENT

FOR OVER THREE QUARTERS OF A
CENTURY, THE BASIC IDEA BEHIND THE
CAR WAS LEFT UNTOUCHED.
Until now. BMW i has launched a groundbreaking sports car with a
wide range of technological innovations – the BMW i8. The innovative
BMW eDrive technology effectively combines an electric motor with
a BMW TwinPower Turbo engine (hybrid electric vehicle). The result
is a breathtaking plug-in hybrid sports car with the fuel consumption
and emissions of a compact vehicle.
The weight of the BMW i8 is a result of the Life module – the passenger cell made of light and extremely robust carbon fiber. It substantially
reduces the weight of the vehicle and has a significant impact on the
design of the BMW i8. The principle of intelligent lightweight design has
also been applied to all other components of the BMW i8. Moreover,
streamflow aerodynamics reduce drag and energy consumption.
With its dynamic proportions and sporty, progressive design, the BMW i8
embodies lightness – as well as efficiency and sheer driving pleasure.
The development process itself is the first of many innovations. In order
to ensure that the BMW i8 is a truly sustainable product, measurable
targets were defined at the design phase and throughout the entire life
cycle of the vehicle, from the extraction of raw materials, production
and use to recycling and the end of product life. The deliberate use of
recycled and environmentally friendly materials in production guarantees
holistic sustainability throughout the entire value chain.
For more information, visit www.bmw-i.com.
Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 4

15.01.14 17:53

The Life module
is made of ultra-light
carbon fiber.

 30%

lighter than aluminum.

 50%

lighter than steel.

The interior features premium sustainable materials.
Approximately 20% of the thermoplastics in the interior
are produced using recycled or renewable materials.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 5

15.01.14 17:53

02. Production

THE BMW i8: FORGED BY THE POWER
OF WIND AND WATER.
Sustainability plays a crucial role for the BMW i8, and the same is true
for the production process. All of the electricity required for the manufacturing process in the BMW i Plant in Leipzig is produced from renewable sources. BMW has been leading the way in sustainable production
for a long time now, but BMW i has gone even further and significantly
improved its facilities. The BMW i plant in Leipzig produces its own renewable electricity from wind power – directly on the factory premises
– and operates on 100 % clean electric power with zero emissions. It
also features significantly reduced resource consumption.
Similarly, the carbon fiber production facility located in Moses Lake
(USA) is powered completely by renewable electricity from the large
number of hydroelectric plants in the area.
For BMW i sustainable production has not only an environmental
dimension but a social one as well, creating future-proof job profiles
and training BMW i’s suppliers to comply with advanced sustainability standards.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 6

15.01.14 17:53

 -20% 100%
water consumption

Consumption of energy and
resources for each BMW i8
produced.*

use of energy from
renewable sources
at the Leipzig plant.

* Compared to the average
of all BMW models, which
sets the standard for the
automotive industry.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 7

15.01.14 17:53

03. UTILIZATION

A SUSTAINABLE COMBINATION:
INTELLIGENT ENERGY MANAGEMENT
FOR INSPIRING PERFORMANCE AND
OPTIMUM EFFICIENCY.
BMW has been pursuing its EfficientDynamics strategy for more than
a decade. However, no other vehicle combines driving pleasure and
sustainability like the BMW i8. Equipped with innovative BMW eDrive
technology that intelligently combines an internal combustion engine
with an electric drive system, the BMW i8 offers maximum performance and sustainable efficiency.
In an urban environment, the BMW i8 offers a range of up to 37 kilometers when traveling on electric power only. For longer distances,
support is provided by the BMW TwinPower Turbo engine – with an
especially intense boost feature in SPORT mode or maximum efficiency
in ECO PRO mode. A predictive power management system developed
specifically for the BMW i8 ensures optimal settings for the two drive
units at all times.
Additionally, every driver can also help to optimize sustainability when
recharging the car: if renewable energy is used to charge the battery,
CO² emissions are reduced even further. Therefore, BMW i recommends green electricity suppliers to make an even greater contribution to environmental protection.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 8

15.01.14 17:53

 2.1 l /100 km
fuel consumption (EU)

49 g/km
CO² emissions

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 9

15.01.14 17:53

04. RECYCLING

FOR THE BMW i8 WE NOT ONLY
PIONEER NEW MATERIALS, WE ALSO
TAKE CARE OF THEIR RECYCLING.
Recycling is a given at BMW i. Excess material from carbon fiber production, carbon components and body parts, for instance, are valuable materials. That’s why they are either reused as secondary raw
materials for the in-house BMW i production cycle or recycled for other
automotive and non-automotive applications. At the start of production
for a BMW i8, more than 5% of the carbon fiber required is already
recycled material. Together with its partners, BMW i is pioneering closed
loops for up to 100% of carbon fiber from production residues or endof-life vehicles.
The BMW Group is always looking for innovative solutions, and this is
also the case when it comes to recycling high-voltage batteries. For
example, the batteries could serve as temporary storage cells for renewable energy. A particularly effective application is to use the batteries
to store solar and wind energy so that generated power can be used
when it is actually needed.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 10

15.01.14 17:53

100%
of old batteries can
be used again as
temporary storage
units in solar power
plants and wind
farms, for example.

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 11

15.01.14 17:53

For more information about BMW i
and its sustainability philosophy, visit:
www.bmw-i.com/sustainability

Online Edition for Part no. 01 40 2 960 891 - II/15
BMW_i8_Bedienungseinleger_210x138mm_US.indd 12

15.01.14 17:53

i8

Owner's Manual for Vehicle
Thank you for choosing a BMW i.
The more familiar you are with your vehicle, the better control
you will have on the road. We therefore strongly suggest:
Read this Owner's Handbook before starting off in your new
BMW i. Also use the Integrated Owner's Manual in your vehicle.
It contains important information on vehicle operation that will
help you make full use of the technical features available in your
BMW i. The manual also contains information designed to en‐
hance operating reliability and road safety, and to contribute to
maintaining the value of your BMW i.
Any updates made after the editorial deadline can be found in
the appendix of the Owner's Handbook for Vehicle.
We wish you a safe and enjoyable ride.
BMW AG

The Owner's Manual is available in many countries as an app.
Additional information on the Internet:
www.bmw.com/bmw_i_drivers_guide

Online Edition for Part no. 01 40 2 960 891 - II/15

© 2015 Bayerische Motoren Werke
Aktiengesellschaft
Munich, Germany
Reprinting, including excerpts, only with the written
consent of BMW AG, Munich.
US English II/15, 03 15 490
Printed on environmentally friendly paper, bleached
without chlorine, suitable for recycling.

Online Edition for Part no. 01 40 2 960 891 - II/15

Addendum

ADDENDUM TO OWNER'S MANUAL
We wanted to provide you with some updates
and clarifications with respect to the printed
BMW Owner's Manual. These updates and
clarifications will supersede the materials contained in that document.
1. Where the terms “service center,” “the service center,” “your service center,” “service
specialist,” or “service” are used in the
Owner's Manual, we wanted to clarify that
the terms refer to a BMW dealer's service
center or another service center or repair
shop that employs trained personnel that
can perform maintenance and repair work
on your vehicle in accordance with BMW
specifications.
2. Where the text of the Owner's Manual contains an affirmative instruction to contact a
“service center” or “your service center,”
we wanted to clarify that BMW recommends that, if you are faced with one of the
situations addressed by that text, you contact or seek the assistance of a BMW
dealer's service center or another service
center or repair shop that employs trained
personnel that can perform maintenance
and repair work on your vehicle in accordance with BMW specifications.
While BMW of North America LLC, at no
cost to you, will pay for repairs required by
the limited warranties provided with respect
to your vehicle and for maintenance under
the Maintenance Program during the applicable warranty and maintenance coverage
periods, you are free to elect, both during
those periods and thereafter, to have maintenance and repair work provided by other
service centers or repair shops.
3. Where the Owner's Manual makes reference to parts and accessories having been
approved by BMW, those references are
intended to reflect that those parts and
accessories are recommended by BMW of
North America LLC. You may elect to use
other parts and accessories, but, if you do,

we recommend that you make sure that any
such parts and/or accessories are appropriate for use on your vehicle.
4. At page 7, under the warranty section's discussion of homologation, where it states
that you “cannot lodge warranty claims for
your vehicle there,” the text should read
that you “may not be able to lodge warranty
claims for your vehicle there.”
5. At page 7, under the heading “Body work
and working on the high-voltage system,”
the text of that section should be disregarded and the following text should be
read in lieu thereof: “BMW recommends to
have modifications and work on the vehicle
only be carried out by an authorized BMW i
service center or one that operates according to BMW i specifications with personnel
trained accordingly. If work is not carried out
properly, there is the risk of fire and fatal
injury from electrocution due to the highvoltage system's high voltage.”
6. At page 8, under the “Parts and Accessories” section, in the sixth sentence, the
word “cannot” should read “does not.”
7. At page 53, in the “Check and replace
safety belts” section, the text beginning,
“This should only be done by your service
center …” should be disregarded and the
following text should be read in lieu thereof:
“BMW recommends having this work performed by a service center as it is important
that this safety feature functions properly.”
8. At page 91, under the heading:  “Special
windshield,” the paragraph beginning,
“Therefore, have the special windshield …”
should be disregarded and the following
text should be read in lieu thereof:  “BMW
recommends that you have the special
windshield replaced by the service center.”
9. At page 141 under the heading: “Objects
within the range of movement of the pedals” and at page 190 under the heading:

Online Edition for Part no. 01 40 2 960 891 - II/15

Addendum
“Carpets and floor mats,” the paragraph
that begins: “Only use floor mats …” should
be disregarded and the following language
should be read in lieu thereof: “The manufacturer of your vehicle recommends that
you use floor mats that have been identified
by it as appropriate for use in your vehicle
and that can be properly fixed in place.”
10. At page 145, under the heading: “Have
maintenance carried out,” the sentence
beginning, “The maintenance should be
carried out …” should be disregarded and
the following text should be read in lieu
thereof:  “BMW recommends that you have
the maintenance carried out by your service
center.”
11. At page 151, under the heading “Make sure
that the charging device is in flawless operating condition,” the word “flawless” should
read “proper.”
12. At page 163, under the heading “Tire inflation specifications,” the sentence beginning, “Tire inflation pressure specifications
apply to approved tire sizes … .” should be
disregarded.
13. At page 167, under the heading: “Mounting,” the paragraph beginning, “Have
mounting and balancing …” should be disregarded and the following text should be
read in lieu thereof: “BMW recommends
that you have mounting and balancing performed by your service center or a tire
mounting specialist.”
14. At page 167, under the heading: “Approved
wheels and tires,” the term “Approved”
should be disregarded and in lieu thereof,
the term “Recommended” should be read
in its place. In addition, the text of that section should be disregarded and the following text should be read in lieu thereof:
The manufacturer of your vehicle strongly
suggests that you use wheels and tires that
have been recommended by the vehicle
manufacturer for your vehicle type; otherwise, for example, despite having the same

official size ratings, variations can lead to
body contact and with it, the risk of severe
accidents.
The manufacturer of your vehicle does not
evaluate non-recommended wheels and
tires to determine if they are suitable for use
on your vehicle.
15. At page 171, under the heading: “Snow
Chains,” the text should be disregarded and
the following text should be read in lieu
thereof:
Only certain types of fine-link snow chains
have been tested by the manufacturer of
your vehicle and are determined by the
manufacturer of your vehicle to be road safe
and are recommended by the manufacturer
of your vehicle.
Information about recommended snow
chains is available from a service center.
16. At page 174, under the heading “Engine
compartment access,” the sentence beginning, “If you are unfamiliar” should be disregarded.
17. At page 176, under the heading: “Engine Oil
Change,” the text should be disregarded
and in lieu thereof should be read as follows:
BMW recommends that you have the oil
changed at your BMW dealer's service center or at another service center that has
trained personnel that can perform the work
in accordance with BMW specifications.
18. At page 179, under the heading: “Service
and Warranty Information Booklet for US
models and Warranty and Service Guide
Booklet for Canadian models,” the second
paragraph should be disregarded and the
following text read in lieu thereof:
The manufacturer of your vehicle recommends that you have maintenance and
repair performed by your BMW dealer's service center or another service center or
repair shop that employs trained personnel
that can perform maintenance and repair
work on your vehicle in accordance with

Online Edition for Part no. 01 40 2 960 891 - II/15

Addendum
BMW specifications. The manufacturer of
your vehicle recommends that you maintain
records of all maintenance and repair work
performed on your vehicle.
19. At page 181 where it reads: “Have any work
on the lighting system … ,” the following
words should be read as preceding that
passage: “It is strongly suggested that
you … .”
20. At page 181, under the “Battery replacement” section, the text should be disregarded and in lieu thereof the following text
should be read:
Use of recommended vehicle batteries
The manufacturer of your vehicle recommends that you use vehicle batteries that it
has tested and recommends for use in your
vehicle; otherwise the vehicle could be
damaged and systems or functions may not
be fully available.
After a battery replacement, the manufacturer of your vehicle recommends that you
have the battery registered on your vehicle
by a service center to ensure that all comfort functions are fully available, and that
any “check control” messages of these
comfort functions are no longer displayed.

Online Edition for Part no. 01 40 2 960 891 - II/15

Contents
The fastest way to find information on a partic‐
ular topic or item is by using the index, refer to
page 198.

6

Notes

At a glance
14
18
26
29
31
34

Cockpit
iDrive
Voice activation system
Integrated Owner's Manual in the vehicle
BMW eDRIVE
Safety of the high-voltage system

Controls
38
51
57
61
75
92
96
109
113
124
129
134

Opening and closing
Adjusting
Transporting children safely
Driving
Displays
Lights
Safety
Driving stability control systems
Driving comfort
Climate control
Interior equipment
Storage compartments

Mobility
150
158
161
163
173
177
178
180
183
187

Charging vehicle
Refueling
Fuel
Wheels and tires
Engine oil
Coolant
Maintenance
Replacing components
Breakdown assistance
Care

Reference
194 Technical data
196 Appendix
198 Everything from A to Z

Driving tips
138 Things to remember when driving
142 Loading
144 Increase range

Online Edition for Part no. 01 40 2 960 891 - II/15

Notes

Notes
Using this Owner's Manual

Symbols

The fastest way to find information on a partic‐
ular topic is by using the index.

Indicates precautions that must be followed
precisely in order to avoid the possibility of
personal injury and serious damage to the
vehicle.

An initial overview of the vehicle is provided in
the first chapter.

◄ Marks the end of a specific item of
information.

Orientation

Updates made after the editorial
deadline
Any updates made after the editorial deadline
can be found in the appendix of the printed
Owner's Handbook for Vehicle.

User's manual for Navigation,
Entertainment, Communication
The topics Navigation, Entertainment, Com‐
munication and the short commands of the
voice activation system can be retrieved on the
Control Display via the Integrated Owner's
Handbook.

Refers to measures that can be taken to
help protect the environment.
"..." Identifies display texts in vehicle used to
select individual functions.
›...‹ Verbal instructions to use with the voice
activation system.
››...‹‹ Identifies the answers generated by the
voice activation system.

Symbols on vehicle components
Indicates that you should consult the
relevant section of this Owner's Manual for
information on a particular part or assembly.

Additional sources of
information
The service center will be happy to answer any
other questions you may have.
Information on BMW, e.g., on technology, is
available on the Internet: www.bmwusa.com.

BMW i Driver’s Guide App
The Owner's Manual is available in many coun‐
tries as an app. Additional information on the
Internet:

Indicates, on certain parts or assemblies, that
incorrect use of high-voltage equipment or of
orange-colored high-voltage components re‐
sults in the risk of life-threatening injury from
electric shock.

www.bmw.com/bmw_i_drivers_guide

Vehicle features and options
This Owner's Manual describes all models and
all standard, country-specific and optional
6

Online Edition for Part no. 01 40 2 960 891 - II/15

Notes

equipment that is offered in the model series.
Therefore, in this Owner's Manual, we also de‐
scribe and illustrate features that are not avail‐
able in your vehicle, e.g., because of the se‐
lected optional features or the country-specific
version.
This also applies to safety-related functions
and systems.
The respectively applicable country provisions
must be observed when using the respective
features and systems.
On right-hand drive vehicles, some controls
are arranged differently from what is shown in
the illustrations.

Status of the Owner's
Manual
Basic information
The manufacturer of your vehicle pursues a
policy of constant development that is con‐
ceived to ensure that our vehicles continue to
embody the highest quality and safety stan‐
dards. In rare cases, therefore, the features de‐
scribed in this Owner's Manual may differ from
those in your vehicle.

Updates made after the editorial
deadline
Any updates made after the editorial deadline
can be found in the appendix of the printed
Owner's Handbook for Vehicle.

For your own safety

ating conditions and permit requirements. If
your vehicle does not comply with the homolo‐
gation requirements in a certain country you
cannot lodge warranty claims for your vehicle
there. Further information can be obtained
from your Service Centre.

Working on the vehicle, maintenance
and repairs
Advanced technology, especially the use of
high-performance high-voltage electronics
and modern materials such as carbon, requires
special knowledge when making modifications
to and working on the vehicle, as well as cus‐
tomized maintenance and repair work.
BMW recommends to have modifications and
work on the vehicle, especially maintenance
and repairs to the high-voltage system and
carbon body as well as the retrofitting of ac‐
cessories only be carried out by an authorized
BMW i service center or one that operates ac‐
cording to BMW i specifications with personnel
trained accordingly.
Body work and working on the high-volt‐
age system
Do not perform any modifications or work on
the vehicle, especially maintenance and repair
work on the high-voltage system and the car‐
bon body and avoid retrofitting accessories.
If work is not carried out properly, there is the
risk of fire and fatal injury from electrocution
due to the high-voltage system's high voltage.
BMW recommends to have modifications and
work on the vehicle only be carried out by an
authorized BMW i service center or one that
operates according to BMW i specifications
with personnel trained accordingly.◀

Warranty
Your vehicle is technically configured for the
operating conditions and registration require‐
ments applying in the country of first delivery homologation. If your vehicle is to be operated
in a different country it might be necessary to
adapt your vehicle to potentially differing oper‐

Parts and accessories
BMW recommends using parts and accesso‐
ries approved by BMW for this purpose.
Your BMW center is the right contact for genu‐
ine BMW parts and accessories, other prod‐

Online Edition for Part no. 01 40 2 960 891 - II/15

7

Notes

ucts approved by BMW and related qualified
advice.

▷ New Vehicle Limited Warranty.

BMW has tested these products for safety and
suitability in relation to BMW vehicles.

▷ Federal Emissions System Defect War‐
ranty.

BMW can assume responsibility for them.
However, we cannot assume any responsibility
whatsoever for parts and accessories that have
not been specifically approved by BMW.

▷ Federal Emissions Performance Warranty.

BMW cannot evaluate whether each individual
product from another manufacturer can be
used with BMW vehicles without presenting a
safety hazard. This guarantee does not apply
when country-specific government approval
has been granted. Testing of this kind may fail
to embrace the entire range of potential oper‐
ating conditions to which components might
be exposed on BMW vehicles. Such products
could conceivably fail to comply with BMW's
own stringent quality standards.

California Proposition 65 Warning
California laws require us to state the following
warning:
Engine exhaust and a wide variety of automo‐
bile components and parts, including compo‐
nents found in the interior furnishings in a vehi‐
cle, contain or emit chemicals known to the
State of California to cause cancer and birth
defects and reproductive harm. In addition,
certain fluids contained in vehicles and certain
products of component wear contain or emit
chemicals known to the State of California to
cause cancer and birth defects or other repro‐
ductive harm. Battery posts, terminals and re‐
lated accessories contain lead and lead com‐
pounds. Wash your hands after handling. Used
engine oil contains chemicals that have caused
cancer in laboratory animals. Always protect
your skin by washing thoroughly with soap and
water.

Service and warranty
We recommend that you read this publication
thoroughly. Your vehicle is covered by the fol‐
lowing warranties:
8

▷ Rust Perforation Limited Warranty.

▷ California Emission Control System Lim‐
ited Warranty.
Detailed information about these warranties is
listed in the Service and Warranty Information
Booklet for US models or in the Warranty and
Service Guide Booklet for Canadian models.
Your vehicle has been specifically adapted and
designed to meet the particular operating con‐
ditions and homologation requirements in your
country and continental region in order to de‐
liver the full driving pleasure while the vehicle
is operated under those conditions. If you wish
to operate your vehicle in another country or
region, you may be required to adapt your ve‐
hicle to meet different prevailing operating
conditions and homologation requirements.
You should also be aware of any applicable
warranty limitations or exclusions for such
country or region. In such case, please contact
Customer Relations for further information.

Maintenance
Maintain the vehicle regularly to sustain the
road safety, operational reliability and the New
Vehicle Limited Warranty.
Specifications for required maintenance meas‐
ures:
▷ BMW Maintenance system
▷ Service and Warranty Information Booklet
for US models
▷ Warranty and Service Guide Booklet for
Canadian models
If the vehicle is not maintained according to
these specifications, this could result in seri‐
ous damage to the vehicle. Such damage is
not covered by the BMW New Vehicle Limited
Warranty.

Online Edition for Part no. 01 40 2 960 891 - II/15

Notes

Data memory
Many electronic components on your vehicle
are equipped with data memories that tempo‐
rarily or permanently store technical informa‐
tion about the condition of the vehicle, events
and faults. This technical information generally
records the state of a component, a module, a
system or the environment:
▷ Operating mode of system components, fill
levels for instance.
▷ Status messages for the vehicle and from
its individual components, e.g., wheel rota‐
tion speed/vehicle speed, deceleration,
transverse acceleration.
▷ Malfunctions and faults in important sys‐
tem components, e.g., lights and brakes.
▷ Responses by the vehicle to special situa‐
tions such as airbag deployment or engag‐
ing the stability control system.
▷ Ambient conditions, such as temperature.
This data is purely technical in nature and is
used to detect and correct faults and to opti‐
mize vehicle functions. Motion profiles over
routes traveled cannot be created from this
data. When service offerings are used, e.g., re‐
pair services, service processes, warranty
claims, quality assurance, this technical infor‐
mation can be read out from the event and
fault memories by the service personnel, in‐
cluding the manufacturer, using special diag‐
nostic tools. You can obtain further information
there if you need it. After an error is corrected,
the information in the fault memory is deleted
or overwritten on a continuous basis.
With the vehicle in use there are situations
where you can associate these technical data
with individuals if combined with other infor‐
mation, e.g., an accident report, damage to the
vehicle, eye witness accounts — possibly with
the assistance of an expert.
Additional functions that are contractually
agreed with the customer - such as vehicle

emergency locating - you can transmit certain
vehicle data from the vehicle.

Event Data Recorder EDR
This vehicle is equipped with an event data re‐
corder EDR. The main purpose of an EDR is to
record, in certain crash or near crash-like situa‐
tions, such as an air bag deployment or hitting
a road obstacle, data that will assist in under‐
standing how a vehicle’s systems performed.
The EDR is designed to record data related to
vehicle dynamics and safety systems for a
short period of time, typically 30 seconds or
less.
The EDR in this vehicle is designed to record
such data as:
▷ How various systems in your vehicle were
operating.
▷ Whether or not the driver and passenger
safety belts were fastened.
▷ How far, if at all, the driver was depressing
the accelerator and/or brake pedal.
▷ How fast the vehicle was traveling.
These data can help provide a better under‐
standing of the circumstances in which
crashes and injuries occur.
EDR data are recorded by your vehicle only if a
nontrivial crash situation occurs; no data are
recorded by the EDR under normal driving
conditions and no personal data, e.g., name,
gender, age, and crash location, are recorded.
However, other parties, such as law enforce‐
ment, could combine the EDR data with the
type of personally identifying data routinely ac‐
quired during a crash investigation.
To read data recorded by an EDR, special
equipment is required, and access to the vehi‐
cle or the EDR is needed. In addition to the ve‐
hicle manufacturer, other parties, such as law
enforcement, that have the special equipment,
can read the information if they have access to
the vehicle or the EDR.

Online Edition for Part no. 01 40 2 960 891 - II/15

9

Notes

Vehicle identification
number

formation about motor vehicle safety from
http://www.safercar.gov.

For Canadian customers
Canadian customers who wish to report a
safety-related defect to Transport Canada, De‐
fect Investigations and Recalls, may call the
toll-free hotline 1-800-333-0510. You can also
obtain other information about motor vehicle
safety from http://www.tc.gc.ca/roadsafety.

The vehicle identification number can be found
under a cover under the front passenger seat.
The vehicle identification number can also be
found behind the windshield.

Reporting safety defects
For US customers
The following only applies to vehicles owned
and operated in the US.
If you believe that your vehicle has a defect
which could cause a crash or could cause in‐
jury or death, you should immediately inform
the National Highway Traffic Safety Adminis‐
tration NHTSA, in addition to notifying BMW of
North America, LLC, P.O. Box 1227, West‐
wood, New Jersey 07675-1227, Telephone
1-800-831-1117.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a
safety defect exists in a group of vehicles, it
may order a recall and remedy campaign.
However, NHTSA cannot become involved in
individual problems between you, your dealer,
or BMW of North America, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236
(TTY: 1-800-424-9153); go to http://
www.safercar.gov; or write to: Administrator,
NHTSA, 400 Seventh Street, SW., Washing‐
ton, DC 20590. You can also obtain other in‐
10

Online Edition for Part no. 01 40 2 960 891 - II/15

Notes

Online Edition for Part no. 01 40 2 960 891 - II/15

11

Online Edition for Part no. 01 40 2 960 891 - II/15

At a glance
These overviews of buttons, switches and
displays are intended to familiarize you with your
vehicle. You will also become quickly acquainted
with the available control concepts and options.

Online Edition for Part no. 01 40 2 960 891 - II/15

At a glance

Cockpit

Cockpit
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to

the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

All around the steering wheel

1

Open the tailgate  44

Parking lights  92

2

Power windows  49

3

Exterior mirror operation  54

4

Open fuel filler flap,

Low beams  92

Tank vent  158
5

Lock, unlock vehicle  44

Automatic headlight con‐
trol  93

6

Opening the door  44

Daytime running lights  93

7

Lights

High-beam Assistant  94
Instrument lighting  95

8
14

Left steering column stalk

Online Edition for Part no. 01 40 2 960 891 - II/15

Cockpit

Turn signal  67

At a glance

12 Steering wheel buttons, right
Entertainment source

High beams, head‐
light flasher  67

Volume

High-beam Assistant  94
Voice activation  26
Roadside parking lights  93
Telephone
On-board computer  87
Thumbwheel for selection lists  86
9

13 Right steering column stalk

Shift paddles  73

10 Steering wheel buttons, left

Wiper  68

Store speed  113
Rain sensor  69
Resume speed  114
Cruise control on/off, interrupt‐
ing  113
Cruise control rocker switch  114

Clean the windshields and head‐
lights  69
14 Horn, total area
15 Adjust steering wheel  56

11 Instrument cluster  75

Online Edition for Part no. 01 40 2 960 891 - II/15

15

At a glance

Cockpit

All around the center console

1

Control Display  18

11 DSC Dynamic Stability Control  109

2

Ventilation  127

12

3

Radio/Multimedia, refer to Integrated Own‐
er's Handbook

4

Glove compartment  134

5

Climate control  124

6

Steptronic Sport transmission  70

7

Parking brake  66

8

Controller with buttons  18

9

Start/Stop button  61
Max eDRIVE  64

13

Intelligent Safety  102

14

Hazard warning system  183

PDC Park Distance Control  115
Rearview camera  117
Surround View  117

10

Driving Dynamics Control  111

16

Online Edition for Part no. 01 40 2 960 891 - II/15

Cockpit

At a glance

All around the roofliner

1

Intelligent Emergency Re‐
quest  183

3

Reading lights  95

2

Indicator lamp, front-seat pas‐
senger airbag  98

4

Interior lights  95

Online Edition for Part no. 01 40 2 960 891 - II/15

17

At a glance

iDrive

iDrive
Vehicle features and options

Control Display

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Hints

The concept
The iDrive combines the functions of many
switches. Thus, these functions can be oper‐
ated from a central location.
Using the iDrive during a trip
To avoid becoming distracted and pos‐
ing an unnecessary hazard to your vehicle's
occupants and to other traffic, never attempt
to use the controls or enter information unless
traffic and road conditions allow it.◀

▷ To clean the Control Display, follow the
care instructions.
▷ Do not place objects close to the Control
Display; otherwise, the Control Display can
be damaged.
▷ In the case of very high temperatures on
the Control Display, e.g. due to intense so‐
lar radiation, the brightness may be re‐
duced down to complete deactivation.
Once the temperature is reduced, e.g.
through shadow or climate control system,
the normal functions are re-established.

Switching on
1. Turn on operations.
2. Press the controller.

Switch off
1.

Press button.

2. "Turn off control display"

Control elements at a glance
Control elements

Controller

1

Control Display

The buttons can be used to open the menus
directly. The controller can be used to select
menu items and enter the settings.

2

Controller with buttons and, depending on
the equipment version, with touchpad

Some iDrive functions can be operated using
the touchpad on the controller.

18

Online Edition for Part no. 01 40 2 960 891 - II/15

iDrive

1. Turn.

At a glance

Press button

Function

BACK

Displays the previous panel.

OPTION

Opens the Options menu.

Operating concept
Opening the main menu
Press button.

2. Press.

3. Move in four directions.

The main menu is displayed.
All iDrive functions can be called up via the
main menu.

Selecting menu items
Highlighted menu items can be selected.
1. Turn the controller until the desired menu
item is highlighted.

Buttons on controller
Press button

Function

MENU

Open the main menu.

RADIO

Opens the Radio menu.

MEDIA

Opens the Multimedia menu.

NAV

Opens the Navigation menu.

TEL

Opens the phone menu.

2. Press the controller.

Online Edition for Part no. 01 40 2 960 891 - II/15

19

At a glance

iDrive

Menu items in the Owner's Manual
In the Owner's Manual, menu items that can be
selected are set in quotation marks, e.g.,
"Settings".

Changing between panels
After a menu item is selected, e.g., "Radio", a
new panel is displayed. Panels can overlap.
▷ Move the controller to the left.
Closes current display and shows previous
display.

Additional options: move the controller to the
right repeatedly until the "Options" menu is
displayed.

Reopens previous display by pressing
BACK button. In this case, the current
panel is not closed.

Options menu

▷ Move the controller to the right.
Opens new display on top of previous
screen.

The "Options" menu consists of various areas:
▷ Screen settings, e.g., "Split screen".
This area remains unchanged.
▷ Control options for the selected main
menu, e.g., for "Radio".
▷ If applicable, further operating options for
the selected menu, e.g., "Store station".

Changing settings
1. Select a field.
2. Turn the controller until the desired setting
is displayed.
White marks to the left or right indicate that
additional panels can be opened.

Display of an opened menu
When selecting a menu, it generally opens with
the panel that was last selected in that menu.
To display the first panel of a menu:
▷ Move the controller to the left repeatedly
until the first panel is displayed.
▷ Press the menu button on the controller
twice.

Opening the Options menu
Press button.
The "Options" menu is displayed.

20

3. Press the controller.

Activating/deactivating the functions
Several menu items are preceded by a check‐
box. It indicates whether the function is acti‐
vated or deactivated. Selecting the menu item
activates or deactivates the function.
Function is activated.

Online Edition for Part no. 01 40 2 960 891 - II/15

iDrive

Function is deactivated.

Touchpad

At a glance

▷ To enter an underscore, swipe to the right
in the lower area of the touchpad.

Using interactive map and Internet

Some iDrive functions can be operated using
the touchpad on the controller:

Selecting functions
1. "Settings"
2. "Touchpad"
3. Select the desired function.
▷ "Speller": enter letters and numbers.
▷ "Interactive map": viewing the interac‐
tive map.
▷ "Browser": enter Internet addresses.
▷ "Audio feedback": pronounces entered
letters and numbers.

Entering letters and numbers
Entering letters requires some practice at the
beginning. When entering, pay attention to the
following:
▷ For the input of upper/lower case letters
and numbers, it may be necessary to reel
via the controller to the corresponding In‐
put mode, refer to page 24, e.g. when the
spelling of upper and lower case letters is
identical.
▷ Enter characters as they are displayed on
the Control Display.
▷ Always enter associated characters, such
as accents or periods so that the letter can
be clearly recognized. Possible input de‐
pends on the set language. Where neces‐
sary, enter special characters via the con‐
troller.

Via touch-pad move the interactive map in the
navigation system and Internet sites.
Function

Controls

Move interactive map or
Internet sites.

Swipe into re‐
spective direc‐
tion.

Enlarge/shrink interactive Drag in or out on
map or Internet sites.
the touchpad with
fingers.
Display the menu or open Tap once.
a link in the Internet.

Changing settings
You may change control display settings via
touchpad. Swipe left or right accordingly.

Example: setting the clock
Setting the clock
On the Control Display:
1.

Press button. The main menu is dis‐
played.

2. Turn the controller until "Settings" is high‐
lighted, and then press the controller.

▷ To delete a character, slide to the left on
the touchpad.
▷ To enter a blank space, slide to the right in
the center of the touchpad.
▷ To enter a hyphen, slide to the right in the
upper area of the touchpad.

3. If necessary, move the controller to the left
to display "Time/Date".

Online Edition for Part no. 01 40 2 960 891 - II/15

21

At a glance

iDrive

4. Turn the controller until "Time/Date" is
highlighted, and then press the controller.

Status field symbols
The symbols are grouped as follows.

Radio symbols
Symbol Meaning
HD Radio station is being received.

Telephone symbols
5. Turn the controller until "Time:" is high‐
lighted, and then press the controller.

Symbol Meaning
Incoming or outgoing call.
Missed call.
Wireless network reception
strength.
Symbol flashes: network search.
Wireless network is not available.
Bluetooth is switched on.
Roaming is active.

6. Turn the controller to set the hours and
press the controller.

Text message was received.

7. Turn the controller to set the minutes and
press the controller.

Check the SIM card.
SIM card is blocked.
SIM card is missing.

Status information

Enter PIN.

Status field
The following information is displayed in the
status field at the top right:

Entertainment symbols
Symbol

▷ Time.
▷ Current entertainment source.
▷ Sound output, on/off.

Meaning
Music collection.
Gracenote® database.

▷ Locating the vehicle.
▷ Wireless network reception strength.

AUX-IN port.

▷ Phone status.

USB audio interface.

▷ Traffic bulletin reception.

Mobile phone audio interface.

22

Online Edition for Part no. 01 40 2 960 891 - II/15

iDrive

Additional symbols
Symbol Meaning

At a glance

4. Press the controller or select "Split screen
content".
5. Select the desired menu item.

Spoken instructions are turned off.
Check the current vehicle position.

Split screen
General information
Additional information can be displayed on the
right side of the split screen, e.g., information
from the on-board comupter.
In the divided screen view, the so-called split
screen, this information remains visible even
when you change to another menu.

Switching the split screen on and off
On the Control Display:
1.

Press button.

2. "Split screen"

Selecting the display
On the Control Display:
1.

Press button.

2. "Split screen"
3. Move the controller until the split screen is
selected.

Programmable memory
buttons
General information
The iDrive functions can be stored on the pro‐
grammable memory buttons and called up di‐
rectly, e.g., radio stations, navigation destina‐
tions, phone numbers and menu entries.
Settings are stored for the profile currently in
use.

Saving a function
1. Highlight the function via the iDrive.
2.

Press and hold the desired button,
until a signal sounds.

Running a function
Press button.
The function will work immediately.
This means, e.g., that the number is dialed
when a phone number is selected.

Displaying the button assignment
Touch buttons with bare fingers. Do not wear
gloves or use objects.
The key assignment is displayed at top edge of
screen.

Online Edition for Part no. 01 40 2 960 891 - II/15

23

At a glance

iDrive

Functional requirement
Data can only be deleted while stationary.

Deleting data
Heed and follow the instructions on the Con‐
trol Display.
1. Turn on operations.
2. "Settings"

Deleting the button assignments

3. Open "Options".

1. Press buttons 1 and 8 simultaneously for
approx. five seconds.

4. "Delete personal data"

2. "OK"

6. "OK"

Deleting personal in the
vehicle

Entering letters and numbers

5. "Continue"

General information

The concept

On the Control Display:

Depending on the usage, the vehicle saves
personal data, such as stored radio stations.
These personal data can be permanently de‐
leted through iDrive.

1. Turn the controller: select letters or num‐
bers.

General information

3. "OK": confirm the entry.

Depending on the equipment package, the fol‐
lowing data can be deleted:
▷ Personal Profile settings.
▷ Stored radio stations.
▷ Stored Favorites buttons.
▷ Travel and computer information.
▷ Music collection.
▷ Navigation, e.g. stored destinations.
▷ Phone book.
▷ Online data, e.g. Favorites, cookies.
▷ Voice notes.

2. Select additional letters or numbers if
needed.

Symbol Function
Press the controller: delete the let‐
ter or number.
Press the controller for an extended
period: delete all letters or numbers.

Switching between cases, letters and
numbers
Depending on the menu, you can reel between
entering upper and lower case, letters and
numbers:

▷ Login accounts.
▷ RemoteApp smartphone tethering.
Altogether, the deletion of the data can take up
to 30 minutes.

24

Online Edition for Part no. 01 40 2 960 891 - II/15

iDrive

Symbol

At a glance

Function
Enter the letters.
Enter the numbers.

or

Tip controller up.

Without navigation system
Select the symbol.

Entry comparison
Entering names and addresses: choice is nar‐
rowed down with every letter entered and let‐
ters may be added automatically.
Entries are continuously compared with data
stored in the vehicle.
▷ Only those letters are offered during input
for which data is available.
▷ Target search: names of locations may be
entered in languages available through
Control Display.

Online Edition for Part no. 01 40 2 960 891 - II/15

25

At a glance

Voice activation system

Voice activation system
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Using voice activation
Activating the voice activation system
1.

Press button on the steering
wheel.

2. Wait for the signal.
3. Say the command.
A command that is recognized by the voice
activation system is announced and dis‐
played in the instrument cluster.

The concept

This symbol in the instrument cluster indi‐
cates that the voice activation system is active.

▷ Most functions displayed on the Control
Display can be operated by voice com‐
mands via the voice activation system. The
system supports you with announcements
during input.

If no other commands are available, use func‐
tion via iDrive.

▷ Functions that can only be used when the
vehicle is stationary cannot be used via the
voice activation system.

Briefly press the button on the steer‐
ing wheel or ›Cancel‹.

▷ The system uses a special microphone on
the driver's side.
▷ ›...‹ Verbal instructions in the Owner's
Manual to use with the voice activation
system.

Terminating the voice activation
system

Possible commands
Most menu items on the Control Display can
be voiced as commands.
The available commands depend on the menu
that is currently displayed on the Control Dis‐
play.

Requirements
Via the Control Display, set a language that is
also supported by the voice activation system
so that the spoken commands can be identi‐
fied.
Set the language, refer to page 90.

There are short commands for many functions.
You may select lists such as phone lists via
voice activation. Read these lists out loud ex‐
actly as they show in the respective list.

Having possible commands read aloud
You can have available commands read out
loud for you: ›Voice commands‹
E. g. if the "Settings" menu is displayed, the
commands for the settings are read out loud.

26

Online Edition for Part no. 01 40 2 960 891 - II/15

Voice activation system

Executing functions using short
commands
Execute functions on the main menu via short
commands. It almost doesn't matter which
menu item is selected, e.g., ›Vehicle status‹.

Help dialog for the voice activation
system
Calling up help dialog: ›Help‹
Additional commands for the help dialog:
▷ ›Help with examples‹: announces informa‐
tion about the current operating options
and the most important commands for
them.
▷ ›Help with voice activation‹: information
about the principle of operation for the
voice activation system is announced.

One example: open the tone
settings
Via the main menu
The commands of the menu items are spoken
just as they are selected via the controller.
1. Turn on the Entertainment sound output if
needed.
2.

Press button on the steering
wheel.

At a glance

Setting the voice dialog
Set system to standard dialog or use a short
version.
The short version of the voice dialog plays
back short messages in abbreviated form.
1. "Settings"
2. "Language/Units"
3. "Speech type:"
4. Select setting.

Adjusting the volume
Turn the volume button while giving an in‐
struction until the desired volume is set.
▷ The volume remains constant even if the
volume of other audio sources is changed.
▷ The volume is stored for the profile cur‐
rently in use.

Hints on Emergency
Requests
Do not use the voice activation system to ini‐
tiate an Emergency Request. In stressful situa‐
tions, the voice and vocal pitch can change.
This can unnecessarily delay the establish‐
ment of a phone connection.
Instead, use the SOS button, refer to
page 183, close to the interior mirror.

3. ›Radio‹
4. ›Tone‹

Via short command
The desired tone settings can also be started
via a short command.
1. Turn on the Entertainment sound output if
needed.
2.

Press button on the steering
wheel.

Environmental conditions
▷ Say the commands, numbers, and letters
smoothly and with normal volume, empha‐
sis, and speed.
▷ Always say commands in the language of
the voice activation system.
▷ Keep the doors and windows closed to
prevent noise interference.

3. ›Tone‹

Online Edition for Part no. 01 40 2 960 891 - II/15

27

At a glance

Voice activation system

▷ Avoid making other noise in the vehicle
while speaking.

28

Online Edition for Part no. 01 40 2 960 891 - II/15

Integrated Owner's Manual in the vehicle

At a glance

Integrated Owner's Manual in the vehicle
Vehicle features and options

Select components

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

1.

Press button.

2. Turn the controller: open "Vehicle info".
3. Press the controller.
4. Selecting desired range:
▷ "Quick reference"
▷ "Search by pictures"
▷ "Owner's Manual"

Integrated Owner's Manual
in the vehicle
The Integrated Owner's Manual can be dis‐
played on the Control Display. It specifically
describes features and functions found in the
vehicle.

Components of the Integrated
Owner's Manual
The Integrated Owner's Manual consists of
three parts, which offer various levels of infor‐
mation or possible access.

Quick Reference Guide
The Quick Reference Guide provides informa‐
tion how to operate the car, how to use basic
vehicle functions or what to do in case of a
breakdown. This information can also be dis‐
played while driving.

Leafing through the Owner's Manual
Page by page with link access
Turn the controller until the next or previous
page is displayed.

Page by page without link access
Scroll through the pages directly while skip‐
ping the links.
Highlight the symbol once. Now simply press
the controller to browse from page to page.
Scroll back.

Search by images
Image search provides information and de‐
scriptions. This is helpful when the terminol‐
ogy for a feature is not at hand.

Scroll forward.

Owner's Manual
Search for information and descriptions by en‐
tering terms selected from the index.

Online Edition for Part no. 01 40 2 960 891 - II/15

29

At a glance

Integrated Owner's Manual in the vehicle

Context help - Owner's Manual to the
temporarily selected function
You may open the relevant information di‐
rectly.

Programmable memory buttons
General information

Opening via the iDrive

The Owner's Manual can be stored on the pro‐
grammable memory buttons and called up di‐
rectly.

To move directly from the application on the
Control Display to the Options menu:

Storing
1. "Owner's Manual" Select via the iDrive.

1.

Press button or move the controller
to the right repeatedly until the "Options"
menu is displayed.

2. "Display Owner's Manual"

Opening when a Check Control
message is displayed
Directly from the Check Control message on
the Control Display:

2.

Press selected button for more
than 2 seconds.

Executing
Press button.
The Owner's Manual is displayed im‐
mediately.

"Display Owner's Manual"

Changing between a function and the
Owner's Manual
To reel from a function, e. g., radio, to the
Owner's Manual on the Control Display and to
alternate between the two displays:
1.

Press button or move the controller
to the right repeatedly until the "Options"
menu is displayed.

2. "Display Owner's Manual"
3. Select the desired page in the Owner's
Manual.
4.

Press button again to return to last
displayed function.

5.

Press button to return to the page of
the Owner's Manual displayed last.

To alternate permanently between the last dis‐
played function and the Owner's Manual re‐
peat steps 4 & 5. Opens a new display every
time.

30

Online Edition for Part no. 01 40 2 960 891 - II/15

BMW eDRIVE

At a glance

BMW eDRIVE
Vehicle features and options

At a glance

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

BMW eDRIVE
Special features of the BMW i
High-voltage system
This BMW i is a hybrid vehicle. In addition to
the combustion engine, the vehicle features a
high-voltage system that consists of an elec‐
tric motor and a high-voltage battery among
other things.

Carbon body
The vehicle consists of two different functional
units: the drive module made from aluminum
and the life module made from carbon fiber re‐
inforced plastic (carbon).

1

Vehicle battery

2

Electrical drive unit

3

High-voltage battery

4

Fuel filler flap

5

Combustion engine

6

Charging port

The concept
The hybrid system makes it possible to opti‐
mize fuel consumption and driving characteris‐
tics.
An electric motor assists the combustion en‐
gine. In certain driving situations, the vehicle
can also be driven using only electric power,
thereby reducing fuel consumption.
In addition to this, the electric motor acts like
an alternator: during braking and coasting, it
converts the vehicle's kinetic energy into elec‐
tricity. The current is stored in the high-voltage
battery and is used to drive the electric motor.

Functions
Acceleration boost: ASSIST and
eBOOST
Driving off and accelerating require a lot of en‐
ergy. To reduce fuel consumption during high
acceleration and to optimize acceleration, the
electric motor supports the combustion en‐

Online Edition for Part no. 01 40 2 960 891 - II/15

31

At a glance

BMW eDRIVE

gine. For this purpose, the electric motor is
supplied by the high-voltage battery.

Electric driving: ePOWER
Under certain conditions, refer to page 64,
the vehicle is powered only by the electric mo‐
tor.

Variable drive configuration
The electric motor drives the front axle and the
combustion engine the rear axle. Depending
on the operating condition, the vehicle has the
options of front-wheel drive, rear-wheel drive
or bundled for four-wheel drive.
Follow instructions for electric driving eDRIVE,
refer to page 64, driving with the combustion
engine DRIVE, refer to page 65, and driving
stability, refer to page 109.

Acoustic pedestrian protection
Depending on the country variant, the system
generates continuous driving noise, refer to
page 65, during electric driving up to approx.
20 mph/30 km/h.

Driving with the combustion engine:
POWER
The combustion engine provides the perform‐
ance to move the vehicle. If necessary, the
high-voltage battery is charged at the same
time.
The hybrid system always starts the combus‐
tion engine automatically.

Energy recovery: CHARGE
The high-voltage battery is charged while driv‐
ing through energy recovery.
The electric motor acts as a generator and
converts the kinetic energy of the vehicle into
electric current.
Charging can take place in various situations
while the vehicle is in motion:

32

▷ When the vehicle is rolling if the accelera‐
tor pedal is not pressed.
▷ During vehicle braking.
When exerting gentle pressure on the brakes,
the vehicle is only braked by the electric motor.
When the brake pedal is depressed further, the
brake system is activated additionally. This is
why only part of the brake energy is used to
charge the high-voltage battery when exerting
firm pressure on the brake.
The mark in the instrument cluster is located
within the CHARGE range.
Sensible driving and early speed reduction are
important to make full use of the energy recov‐
ery feature.

Display
The eDRIVE displays, refer to page 75, pro‐
vide information about the current state of the
drive and visualize the system's use in a dia‐
gram.

Energy-saving driving
To save energy while driving, read the follow‐
ing information:

Before driving
eDRIVE allows using the air conditioner even
before driving off. The stationary climate con‐
trol, refer to page 127, provides more range
than full air conditioning while driving.
Parked car ventilation during the charging
process can provide maximum range when
driving off.

During driving
▷ General driving tips, refer to page 144, for
increasing the range.
▷ Use the eDRIVE system efficiently, refer to
page 138, for an optimized driving style.
▷ ECO PRO mode, refer to page 145, for in‐
creasing the range.

Online Edition for Part no. 01 40 2 960 891 - II/15

BMW eDRIVE

At a glance

▷ Display of hybrid system utilization, refer to
page 78
▷ Hints for saving fuel, refer to page 144, for
reduction of the fuel consumption.

After the trip
▷ Charge vehicle, refer to page 150, and
plan next trip.
▷ Prepare for long downtimes, refer to
page 190.

BMW i Remote app
A special BMW i Remote App allows to control
and display certain vehicle functions using a
smartphone.

Safety information
Read the information on safe handling of the
high-voltage system, refer to page 34.

Long-term
Follow the instructions for vehicle storage and
for longer idle periods, refer to page 190.

Online Edition for Part no. 01 40 2 960 891 - II/15

33

At a glance

Safety of the high-voltage system

Safety of the high-voltage system
Safety of the high-voltage
system
Working on the vehicle
Maintenance and repairs
Have maintenance and repair work per‐
formed only by a service center or a workshop
that works according to BMW specifications
with appropriately trained personnel. Other‐
wise, there is the risk of fatal injury from elec‐
trocution due to the high-voltage system's
high voltage.◀

▷ Liquid escapes in the trunk.
In these cases there is no risk of injury from
electrocution. Other damage to the vehicle is
possible.

High-voltage system: automatic
deactivation
If an accident occurs, the high-voltage system
is switched off automatically to prevent risk of
danger to occupants and other traffic.
Read the information on What to do after an
accident, refer to page 186.

Body work and working on the high-volt‐
age system
Do not perform any modifications or work on
the vehicle, especially maintenance and repair
work on the high-voltage system and the car‐
bon body and avoid retrofitting accessories.
If work is not carried out properly, there is the
risk of fire and fatal injury from electrocution
due to the high-voltage system's high voltage.
BMW recommends to have modifications and
work on the vehicle only be carried out by an
authorized BMW i service center or one that
operates according to BMW i specifications
with personnel trained accordingly.◀
Your vehicle's high-voltage system is a selfcontained system. Safety is ensured as long as
no work is performed on technical components
or on the chassis.

High-voltage system: contact with
water
The high-voltage system is typically safe even
in the following example situations:
▷ Water in the footwell, for instance after a
rainstorm when sunroof was kept open.
▷ Vehicle is in water but only up to the al‐
lowed height.
34

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety of the high-voltage system

Online Edition for Part no. 01 40 2 960 891 - II/15

At a glance

35

Online Edition for Part no. 01 40 2 960 891 - II/15

Controls
This chapter is intended to provide you with
information that will give you complete control of
your vehicle. All features and accessories that
are useful for driving and your safety, comfort
and convenience are described here.

Online Edition for Part no. 01 40 2 960 891 - II/15

Controls

Opening and closing

Opening and closing
Vehicle features and options

At a glance

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Remote control/key
General information
The vehicle is supplied with two remote con‐
trols with integrated key.
Every remote control holds a replaceable bat‐
tery.
You may set the key functions depending on
the optional features and country-specific ver‐
sion. For Settings, refer to page 46.

1

Unlocking

2

Locking

3

Unlock the tailgate

4

▷ With alarm system: panic mode
▷ Without panic mode:
Adjustable function: headlamp cour‐
tesy delay feature or stationary climate
control.

Integrated key

The vehicle stores personal settings for every
remote control. Personal Profile, refer to
page 39.
The remote controls hold information on re‐
quired maintenance. Service data in the re‐
mote control, refer to page 178

Press button, arrow 1, and remove the key, ar‐
row 2.
The integrated key fits the driver's door lock.

38

Online Edition for Part no. 01 40 2 960 891 - II/15

Opening and closing

Replacing the battery

Controls

▷ Interference of radio transmission by
charger while charging items such as mo‐
bile devices in the vehicle.
A Check Control message is displayed if one
attempts to turn on the radio-ready state or ac‐
tivate engine readiness.

Activation of drive readiness via
emergency detection of the remote
control
1. Remove integrated key from remote con‐
trol.
2. Raise the cover of the battery compart‐
ment, arrow 1.
3. Remove the cover of the battery compart‐
ment, arrow 2.
4. Insert a battery of the same type with the
positive side facing up.
5. Press the cover closed.
Take the used battery to a recycling
center or to your service center.

New remote controls
New remote controls are available from the
service center.

Loss of the remote controls
Lost remote controls can be disabled by your
service center.

Emergency detection of remote
control
Also in the following situations, radio-ready
state and drive readiness can be established:
▷ Interference of radio transmission to re‐
mote control by external sources e.g., by
radio masts.
▷ Empty battery in remote control.
▷ Interference from radio transmissions
through mobile devices in close proximity
to remote control.

If a respective Check Control message ap‐
pears, hold the remote control with its back
against the marked area on the steering col‐
umn. The BMW logo on the remote control
should be at the same height as the marked
area. Press the Start/Stop button within
10 seconds while pressing the brake pedal.
If the remote control is not recognized: slightly
change the height position of the remote con‐
trol and repeat the procedure.

Personal Profile
The concept
Personal Profile provides three profiles, using
which personal vehicle settings can be stored.
Every remote control has one of these profiles
assigned.
If the vehicle is unlocked using a remote con‐
trol, the assigned personal profile will be acti‐
vated. All settings stored in the profile are au‐
tomatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings

Online Edition for Part no. 01 40 2 960 891 - II/15

39

Controls

Opening and closing

during unlocking. These settings are also re‐
stored, if the vehicle has been used in the
meantime by a person with a different remote
control.
Changes to the settings are automatically
saved in the personal profile.
Three personal profiles and a guest profile can
be created.

▷ If the profile is already assigned to a differ‐
ent remote control, this profile will apply to
both remote controls. It cannot be differen‐
tiated anymore between the settings for
the two remote controls.

Renaming profiles
A personal name can be assigned to every pro‐
file to avoid confusion between the profiles.

Adjusting

1. "Settings"

The settings for the following systems and
functions are saved in the active profile. The
scope of storable settings is country- and
equipment-dependable.

2. "Profiles"

▷ Unlocking and locking.
▷ Lights.

3. "Options"
4. "Rename current profile"

Resetting profiles
The settings of the active profile are reset to
their default values.

▷ Climate control.
▷ Radio.

1. "Settings"

▷ Instrument cluster.
▷ Programmable memory buttons.
▷ Volumes, tone.

2. "Profiles"
3. "Options"
4. "Reset current profile"

▷ Control Display.
▷ Navigation.

Exporting profiles

▷ Park Distance Control PDC.

Most settings of the active profile can be ex‐
ported.

▷ Head-up Display.
▷ Driving Dynamics Control.
▷ Intelligent Safety.

Profile management

This can be helpful for securing and retrieving
personal settings, before delivering the vehicle
to a workshop, e.g. Profiles can be taken to an‐
other vehicle equipped with the Personal Pro‐
file function.

Opening profiles

The following export options are available:

Regardless of the remote control in use a dif‐
ferent profile may be activated.

▷ Via BMW Online.
Popular file systems for USB devices are
supported. FAT32 and exFAT are the rec‐
ommended formats for profile export.
Other formats may not support the export.

1. "Settings"
2. "Profiles"
3. Select a profile.
▷ All settings stored in the called-up profile
are automatically applied.
▷ The called-up profile is assigned to the re‐
mote control being used at the time.
40

▷ Via the USB port to a USB device.

1. "Settings"
2. "Profiles"

Online Edition for Part no. 01 40 2 960 891 - II/15

Opening and closing

Controls

3. "Export profile"

3. "Options"

4. BMW Online: "BMW Online"

4. "Display user list at startup"

USB interface: "USB device"
Alternatively, the settings and contacts can be
exported via an app to a suitable smartphone.

LED in the driver's door

Importing profiles

The signals of the LED have the
following meanings:

Profiles exported via BMW Online can also be
imported via BMW Online.

▷ 1x flashing: door is locked.
The LED then still lights up
for a certain time, if the vehi‐
cle was locked from the out‐
side.

Profiles stored on a USB device can be im‐
ported via the USB interface.
Existing settings are overwritten with the im‐
ported profile.

The LED then lights up per‐
manently, if the vehicle was
locked from the inside or au‐
tomatically while driving off.

1. "Settings"
2. "Profiles"
3. "Import profile"

▷ 2x flashing: door is unlocked.

4. BMW Online: "BMW Online"

▷ More than 2x flashing: door malfunction. In
this case, contact the service center.

USB interface: "USB device"
Alternatively, the settings and contacts can be
imported via an app from a suitable smart‐
phone.

Using the guest profile
The guest profile is for individual settings that
are saved in none of the three personal pro‐
files.
This can be useful for drivers who are using
the vehicle temporarily and do not have their
own profile.

Using the remote control
Note
Take the remote control with you
People or animals left unattended in a
parked vehicle can lock the doors from the in‐
side. Always take the remote control with you
when leaving the vehicle so that the vehicle
can then be opened from the outside.◀

1. "Settings"

Unlocking

2. "Profiles"
3. "Guest"

Press button on the remote control.

The guest profile cannot be renamed. It is not
assigned to the current remote control.

Display profile list during start

▷ All doors and the tailgate are being un‐
locked.

The profile list can be displayed during each
start to select the desired profile.

▷ The interior lamps are switched on. This
function is not available, if the interior
lamps were switched off manually.

1. "Settings"

▷ The welcome lamps are switched on, if this
function was activated.

2. "Profiles"

Online Edition for Part no. 01 40 2 960 891 - II/15

41

Controls

Opening and closing

▷ Exterior mirrors folded through convenient
closing are folded open.
You can set how the vehicle is to be unlocked.
For Settings, refer to page 46.
Anti-theft protection is switched off.
The alarm system, refer to page 47, is dis‐
armed.

Convenient opening
Press and hold this button on the re‐
mote control after unlocking.
The windows are opened, as long as the but‐
ton on the remote control is pressed.

Locking
Locking from the outside
Do not lock the vehicle from the outside
with people inside the car, as the vehicle can‐
not be unlocked from inside without special
knowledge.◀
The driver's door must be closed.
Press button on the remote control.
All doors and the tailgate are being locked.
Anti-theft protection is switched on. It pre‐
vents the doors from being unlocked using the
door openers.
The alarm system, refer to page 47, is armed.

Switching on interior lights
Press button on the remote control with
the vehicle locked.
This function is not available, if the interior
lamps were switched off manually.
If the button is pressed again within 10 sec‐
onds after vehicle was locked, the interior mo‐
tion sensor and tilt alarm sensor of the antitheft warning system, refer to page 48, are
turned off. After locking, wait 10 seconds be‐
fore pressing the button again.

42

Unlocking the tailgate
Press button on the remote control for
approx. 1 second.
The tailgate opens slightly, regardless of
whether the vehicle was previously locked or
unlocked.
Depending on the features and the country
version, it is also possible to have door un‐
locked. Create the settings, refer to page 46.
If the doors were not unlocked, the tailgate is
locked again as soon as it closes.
Do not place the remote control in the
cargo area
Take the remote control with you and do not
leave it in the cargo area; otherwise, the re‐
mote control is locked inside the vehicle when
the tailgate is closed.◀
Provide edge protection
Sharp objects or those with edges can
hit the rear window while driving and damage
the heat conductors of the rear window. Pro‐
vide edge protection.◀

Without alarm system: switching the
headlamp courtesy delay feature on
The headlight courtesy delay feature function
must be set for the remote control button. For
Settings, refer to page 46.
Briefly press the button on the remote
control.
The duration can be set in the Control Display.

With alarm system: panic mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
Press button on the remote control for
at least 3 seconds.
To reel off the alarm: press any button.

Online Edition for Part no. 01 40 2 960 891 - II/15

Opening and closing

Malfunction
Remote control detection by the vehicle can
among others be malfunctioning under the fol‐
lowing circumstances:
▷ The battery of the remote control is dis‐
charged. Replace the battery, refer to
page 39.
▷ Interference of the radio connection from
transmission towers or other equipment
with high transmit power.
▷ Shielding of the remote control due to
metal objects.
▷ Interference of the radio connection from
mobile phones or other electronic devices
in direct proximity.
Do not transport the remote control together
with metal objects or electronic devices.

Controls

Any unauthorized modifications or changes to
these devices could void the user's authority to
operate this equipment.

Without remote control
Locking from the outside
1. Close the driver's door from the outside.
2. Enter the vehicle via the front passenger
side and close front passenger door.
3.

Press button for central locking
system.
Vehicle is locked.

4. Unlock the front passenger door via the
lever in the door frame, refer to page 44.

In the case of interference, the vehicle can also
be unlocked and locked from the outside with‐
out remote control, refer to page 43.

5. Exit the vehicle on the front passenger
side:

For US owners only

6. Close the front passenger door.

The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is gov‐
erned by the following:

Make sure that the remote control is not in
the vehicle.

Unlocking from the outside

FCC ID:
▷ LX8766S.
▷ LX8766E.
▷ LX8CAS.
▷ LX8CAS2.
▷ MYTCAS4.
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
▷ This device may not cause harmful inter‐
ference, and
▷ this device must accept any interference
received, including interference that may
cause undesired operation.

The driver's door can be opened at the door
lock using the integrated key, refer to page 38.
The alarm system is set off when the vehicle is
opened using the door lock.
In order to terminate this alarm, unlock vehicle
with the remote control or establish radioready state, if needed, through emergency de‐
tection of the remote control, refer to page 39.

Online Edition for Part no. 01 40 2 960 891 - II/15

43

Controls

Opening and closing

From the inside
Unlocking and locking

Via the buttons for the central locking system.
▷

When there is a power failure or to unlock the
door from the rear: first push down on the lever
in the door frame in the front area, arrow. The
lever is raised.

By pressing the button, the vehicle
is locked with the doors closed.

▷

Pressing the button unlocks the
vehicle.

The vehicle is not secured against theft when
locking.
In the event of a severe accident, the vehicle is
automatically unlocked. The hazard warning
system and interior lights come on.

Pull the release on the bottom of the lever up‐
wards, arrow 1, then push the lever forwards,
arrow 2.

Unlocking and opening
Press button.

Hood

The door is unlocked and slightly open.
Push the door outward.

The hood should only be opened by the serv‐
ice center.

Note swivel range of the door.
The folding doors swivel to the side and
upward. Before opening, make sure that the
swivel range is clear. Otherwise, the doors can
be damaged.◀

Tailgate
Opening
The tailgate swings back and up when it
opens.
Ensure that adequate clearance is available
before opening.

Opening from the outside
▷

44

Press button on the remote con‐
trol for approx. 1 second.

Online Edition for Part no. 01 40 2 960 891 - II/15

Opening and closing

As the case may be, the doors are also un‐
locked. Unlocking with the remote control,
refer to page 42.

Controls

Comfort Access
The concept

The tailgate is unlocked and can be swung up‐
ward.

The vehicle can be accessed without activat‐
ing the remote control.

Opening from the inside

All you need to do is to have the remote con‐
trol with you, such as in your pants pocket.

With the vehicle is stationary, press
the button in the door armrest.

Closing

The vehicle automatically detects the remote
control when it is in close proximity or in the
car's interior.
Comfort Access supports the following func‐
tions:

Hints

▷ Unlocking/locking of the vehicle.

Keep the closing path clear
Make sure that the closing path of the
tailgate is clear; otherwise, injuries may re‐
sult.◀
Do not place the remote control in the
cargo area
Take the remote control with you and do not
leave it in the cargo area; otherwise, the re‐
mote control is locked inside the vehicle when
the tailgate is closed.◀
Provide edge protection
Sharp objects or those with edges can
hit the rear window while driving and damage
the heat conductors of the rear window. Pro‐
vide edge protection.◀

▷ Convenient closing.
▷ Establish drive readiness.

Functional requirements
▷ There are no external sources of interfer‐
ence nearby.
▷ To lock the vehicle, the remote control
must be located outside of the vehicle.
▷ The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
▷ Drive readiness can only be established if
the remote control is in the vehicle.

Unlocking

Emergency unlocking

Before pressing the door opener button, draw
your hand across the sensor surface, arrow.

Pull the handle inside the trunk.

This corresponds with pressing the button on
the remote control.

The tailgate is unlocked.

Online Edition for Part no. 01 40 2 960 891 - II/15

45

Controls

Opening and closing

Locking

▷ The battery of the remote control is dis‐
charged. Replace the battery, refer to
page 39.
▷ Interference of the radio connection from
transmission towers or other equipment
with high transmit power.
▷ Shielding of the remote control due to
metal objects.

From above, touch the surface on the side wall
with your finger for approx. 1 second, arrow.
This corresponds with pressing the button on
the remote control.
To save battery power, ensure that all power
consumers are turned off before locking the
vehicle.

Convenient closing

▷ Interference of the radio connection from
mobile phones or other electronic devices
in direct proximity.
Do not transport the remote control together
with metal objects or electronic devices.
In the case of a malfunction, unlock and lock
the vehicle using the buttons of the remote
control or using the integrated key, refer to
page 43.

Adjusting

Monitor closing
Monitor closing to ensure that no one
becomes trapped.◀

Unlocking
The settings are saved in the active profile, re‐
fer to page 39.

Doors
1. "Settings"
2. "Doors/key"
3.

Select the symbol.

4. Select the desired function:
▷ "Driver's door only"
From above, touch the surface on the sidewall
with your finger and hold it there, arrow.
This corresponds to pressing and holding
the remote control button.

Only the driver's door is unlocked.
Pressing again unlocks the entire vehi‐
cle.
▷ "All doors"
The entire vehicle is unlocked.

Malfunction
Remote control detection by the vehicle can
among others be malfunctioning under the fol‐
lowing circumstances:

46

Online Edition for Part no. 01 40 2 960 891 - II/15

Opening and closing

Tailgate
Depending on optional features and country
version, this setting is not offered in some
cases.
1. "Settings"

Without alarm system: headlamp
courtesy delay feature/standing
climate control
The settings are saved in the active profile, re‐
fer to page 39.
1. "Settings"

2. "Doors/key"
3.

Controls

Select the symbol.

4. Select the desired function:

2. "Doors/key"
3.

Select the symbol.

4. Select the desired function:

▷ "Tailgate"
The tailgate is unlocked.
▷ "Tailgate + door(s)"
The tailgate and the doors are un‐
locked.

Confirmation signals from the vehicle
The settings are saved in the active profile, re‐
fer to page 39.
1. "Settings"

▷ "Pathway lighting"
Headlight courtesy delay feature
▷ "Comfort climate control"
Stationary climate control

Alarm system
The concept

2. "Doors/key"

When the vehicle is locked, the vehicle alarm
system responds to:

3. Deactivate or activate the desired confir‐
mation signals.

▷ Opening a door, the hood or the tailgate.

▷ "Acoustic sig. lock/unlock"
▷ "Flash when lock/unlock"

▷ Movements in the interior.
▷ Changes in the vehicle tilt, e. g., during at‐
tempts at stealing a wheel.
▷ Disconnected battery voltage.

Automatic locking
The settings are saved in the active profile, re‐
fer to page 39.

The alarm system briefly signals tampering:
▷ By sounding an acoustic alarm.
▷ By switching on the hazard warning sys‐
tem.

1. "Settings"
2. "Doors/key"
3. Select the desired function:
▷ "Lock if no door is opened"
The vehicle locks automatically after a
short period of time if no door is
opened.
▷ "Lock after start driving"
The vehicle locks automatically after
you drive off.

▷ By flashing the high beams.

Arming and disarming the alarm
system
When you unlock or lock the vehicle, either
with the remote control or via the Comfort Ac‐
cess, the alarm system is disarmed or armed at
the same time.

Online Edition for Part no. 01 40 2 960 891 - II/15

47

Controls

Opening and closing

Door lock and armed alarm system
The alarm system is triggered when the door is
opened, when the vehicle is unlocked via the
door lock.

Tailgate and armed alarm system
The tailgate can be opened even when the
alarm system is armed.
After the tailgate is closed, it is locked and
monitored again when the doors are locked.
The hazard warning system flashes once.

When the still open access is closed, inte‐
rior motion sensor and tilt alarm sensor will
be switched on.
▷ The indicator lamp goes out after unlock‐
ing:
The vehicle has not been tampered with.
▷ The indicator lamp flashes after unlocking
until the radio-ready state is switched on,
but no longer than approx. 5 minutes:
An alarm has been triggered.

Panic mode

Tilt alarm sensor

You can trigger the alarm system if you find
yourself in a dangerous situation.

The tilt of the vehicle is monitored.

Press button on the remote control for
at least 3 seconds.
To switch off the alarm: press any button.

Indicator lamp on the interior rearview
mirror

The alarm system responds in situations such
as attempts to steal a wheel.

Interior motion sensor
The windows must be closed for the system to
function properly.

Avoiding unintentional alarms
The tilt alarm sensor and interior motion sen‐
sor can be switched off together, such as in
the following situations:
▷ In automatic car washes.
▷ In duplex garages.
▷ During transport on trains carrying vehi‐
cles, at sea or on a trailer.
▷ With animals in the vehicle.

▷ The indicator lamp flashes briefly every
2 seconds:
The system is armed.
▷ The indicator lamp flashes after locking:
The doors, hood or tailgate is not closed
properly, but the rest of the vehicle is se‐
cured.
After 10 seconds, the indicator lamp
flashes continuously. Interior motion sen‐
sor and tilt alarm sensor are not active.

48

Switching off the tilt alarm sensor and
interior motion sensor
Press the remote control button again
within 10 seconds as soon as the vehicle
is locked.
The indicator lamp lights up for approx. 2 sec‐
onds and then continues to flash.
The tilt alarm sensor and interior motion sen‐
sor are turned off, until the vehicle is locked
again.

Online Edition for Part no. 01 40 2 960 891 - II/15

Opening and closing

Switching off the alarm
▷ Unlock vehicle with the remote control or
establish radio-ready state, if needed
through emergency detection of remote
control, refer to page 39.
▷ With Comfort Access: if you are carrying
the remote control on your person, touch
the sensor surface, refer to page 45, before
the door opener button.

Closing
Keep the closing path clear
Monitor closing and make sure that the
closing path of the window is clear; otherwise,
injuries may result.◀
To close a window, the corresponding door
must be closed.
▷

Power windows
Hint
Take the remote control with you
Take the remote control with you when
leaving the vehicle so that children, e.g., can‐
not operate the power windows and injure
themselves.◀

Controls

Pull the switch to the resistance
point.
The window closes while the switch is
held.

▷

Pull the switch beyond the resistance
point.
The window closes automatically. Pulling
again stops the motion.

See also: closing by means of Comfort Access,
refer to page 45.

Pinch protection system
Danger of jamming even with pinch pro‐
tection
Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀
No window accessories

Opening
▷

▷

Press the button to the resistance
point.

Do not install any accessories in the win‐
dow's range of movement; otherwise, the
pinch protection system will be impaired.◀

The window opens while the switch is held.

If closing force exceeds a specific margin as a
window closes, closing is interrupted.

Press the switch beyond the resist‐
ance point.

The window reopens slightly.

The window opens automatically. Pressing
the switch again stopse the motion.

Closing without the pinch protection
system

See also: Convenient opening, refer to
page 42, via remote control.

Keep the closing path clear
Monitor closing and make sure that the
closing path of the window is clear; otherwise,
injuries may result.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

49

Controls

Opening and closing

E.g. danger from the outside or ice might pre‐
vent window from closing properly - proceed
as follows:
1. Pull the reel past the resistance point and
hold it there.
The pinch protection is limited and the
window reopens slightly if the closing force
exceeds a certain margin.
2. Pull the reel past the resistance point again
within approx. 4 seconds and hold it there.
The window closes without jam protection.

50

Online Edition for Part no. 01 40 2 960 891 - II/15

Adjusting

Controls

Adjusting
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Sitting safely

Keep the movement area unobstructed
When changing the seat position, keep
the seat's area of movement unobstructed;
otherwise, people might get injured or objects
damaged.◀

Rear seating positions
The vehicle is designed as a 2+2-seater. The
utility of the rear seats is limited. In order to
keep the risk of an injury during a collision or
an accident as small as possible, the top edge
of the backrest should be at least just above
eye height.

The ideal seating position can make a vital
contribution to relaxed, fatigue-free driving.

Electrically adjustable seats

The seating position plays an important role in
an accident in combination with:

At a glance

▷ Safety belts, refer to page 53.
▷ Head restraints, refer to page 54.
▷ Airbags, refer to page 96.

Seats
Hints
Do not adjust the seat while driving
Do not adjust the driver's seat while driv‐
ing, or the seat could respond with unexpected
movement and the ensuing loss of vehicle
control could lead to an accident.◀

1

Backrest tilt

2

Forward/backward, height, seat tilt

Adjustments in detail
1. Forward/back.

Do not incline the backrest too far to the
rear
Do not incline the backrest too far to the rear
while driving, or there is a risk of slipping under
the safety belt in the event of an accident. This
would eliminate the protection normally pro‐
vided by the belt.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

51

Controls

Adjusting

Fold down seat back

2. Height.

1. Pull lever up to the stop.

3. Seat tilt.
2. Fold backrest forward.

Front seat heating

4. Backrest tilt.

Switching on
Press button once for each tempera‐
ture level.
The maximum temperature is reached when
three LEDs are lit.

Entering the rear

If the journey is continued within approx. 15
minutes, the seat heating is activated automat‐
ically with the temperature selected last.

Note

When ECO PRO, refer to page 145, is acti‐
vated, the heater output is reduced.

Folding back and locking the backrest
Before driving off, fold back and lock the
backrests; otherwise, an unexpected seat
movement may cause an accident.◀

52

Switch off
Press button longer.
The LEDs go out.

Online Edition for Part no. 01 40 2 960 891 - II/15

Adjusting

Safety belts

Controls

Buckling the belt

Seats with safety belt
The vehicle has four seats, each of which is
equipped with a safety belt.

General information
Always make sure that safety belts are being
worn by all occupants before driving off.
For the occupants' safety the belt locking
mechanism triggers early. Slowly guide the
belt out of the holder when applying it.
Although airbags enhance safety by providing
added protection, they are not a substitute for
safety belts.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of ev‐
ery build if the seat is correctly adjusted.

1. Insert belt in the belt buckle, arrow 1.
2. Insert the buckle tongue in the belt buckle,
arrow 2.
Make sure you hear the latch plate engage
in the belt buckle.

Unbuckling the belt
1. Hold the belt firmly.
2. Press the red button in the belt buckle.

Hints
One person per safety belt
Never allow more than one person to
wear a single safety belt. Never allow infants or
small children to ride on a passenger's lap.◀
Putting on the belt
Lay the belt, without twisting, snugly
across the lap and shoulders, as close to the
body as possible. Make sure that the belt lies
low around the hips in the lap area and does
not press on the abdomen. Otherwise, the belt
can slip over the hips in a frontal impact and in‐
jure the abdomen.
The safety belt must not lie across the neck,
rub on sharp edges, be routed over breakable
objects, or be pinched.◀
What reduces the restraining effect
Avoid wearing bulky clothing, and pull
the shoulder belt periodically to readjust the
tension. Make sure that the belt is not jammed;
otherwise, the belt can be damaged and the
restraining effect is reduced.◀

3. Guide the belt back into its roll-up mecha‐
nism.

Safety belt reminder for driver's and
passenger's seat
The indicator lamp lights up and a sig‐
nal sounds. Make sure that the safety
belts are positioned correctly. The
safety belt reminder is active at speeds above
approx. 6 mph/10 km/h. It can also be activated
if objects are placed on the front passenger
seat.

Damage to safety belts
Wear and tear after accidents or when dam‐
aged otherwise:
Have the safety belts, including the safety belt
tensioners, replaced and have the belt anchors
checked.
Check and replace safety belts
This should only be done by your service
center; otherwise, this safety feature might not
work properly.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

53

Controls

Adjusting

Front head restraints

At a glance

Distance
The spacing is adjusted to the back of the
head using the incline of the seat backrest.
Adjust the distance so that the head restraint
is as close as possible to the back of the head.

Removing
The head restraints cannot be removed.

Mirrors
Exterior mirrors

1

Adjusting  54

2

Left/right, Automatic Curb Monitor

3

Fold in and out  55

Selecting a mirror

General information

To change over to the other mirror:

The mirror on the passenger side is more
curved than the driver's side mirror.

Slide the switch.

Depending on the vehicle equipment, the mir‐
ror setting is stored for the profile currently in
use. When the vehicle is unlocked via the re‐
mote control, the position is automatically re‐
trieved if this function is active.

Adjusting electrically
The setting corresponds to the direc‐
tion in which the button is pressed.

Adjusting manually

Note
Estimating distances correctly
Objects reflected in the mirror are closer
than they appear. Do not estimate the distance
to the traffic behind you based on what you
see in the mirror, as this will increase your risk
of an accident.◀

In case of electrical malfunction press edges of
mirror.

Automatic Curb Monitor
The concept
If reverse gear is engaged, the mirror glass on
the front passenger side is tilted downward.
This improves your view of the curb and other
low-lying obstacles when parking, e.g.
Activating
1.

Slide the switch to the driver's side
mirror position.

2. Engage selector lever position R.

54

Online Edition for Part no. 01 40 2 960 891 - II/15

Adjusting

Deactivating
Slide the switch to the passenger side mirror
position.

Controls

Interior rearview mirror, manually
dimmable
Flip lever

Fold in and out
Press button.
Possible at speeds up to approx.
15 mph/20 km/h.
E. g. this is advantageous
▷ In car washes.
▷ In narrow streets.
▷ For folding mirrors back out that were
folded away manually.

To reduce the blinding effect of the interior
rear view mirror, flip the lever forward.

Mirrors that were folded in are folded out auto‐
matically at a speed of approx.
25 mph/40 km/h.

Interior rearview mirror, automatic
dimming feature

Fold in the mirror in a car wash
Before washing the car in an automatic
car wash, fold in the exterior mirrors by hand or
with the button; otherwise, the mirrors could
be damaged, depending on the width of the
vehicle.◀

The concept

Automatic heating
Both exterior mirrors are automatically heated
whenever drive readiness is switched on.

Automatic dimming feature
Both exterior mirrors are automatically dim‐
med. Photocells are used to control the Interior
rearview mirror, refer to page 55.

Photocells are used for control:
▷ In the mirror glass.
▷ On the back of the mirror.

Functional requirement
For proper operation:
▷ Keep the photocells clean.
▷ Do not cover the area between the inside
rearview mirror and the windshield.

Online Edition for Part no. 01 40 2 960 891 - II/15

55

Controls

Adjusting

Steering wheel
Note
Do not adjust while driving
Do not adjust the steering wheel while
driving; otherwise, an unexpected movement
could result in an accident.◀

Adjusting

1. Fold the lever down.
2. Move the steering wheel to the preferred
height and angle to suit your seating posi‐
tion.
3. Fold the lever back.

56

Online Edition for Part no. 01 40 2 960 891 - II/15

Transporting children safely

Controls

Transporting children safely
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to

the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

The right place for children
Note

Note

Children in the vehicle
Do not leave children unattended in the
vehicle; otherwise, they could endanger them‐
selves and other persons, e.g., by opening the
doors.◀

Children should always be in the rear
Accident research shows that the safest place
for children is in the back seat.
Transporting children in the rear

Deactivating the front-seat passenger
airbags
If a child restraint system is used in the front
passenger seat, deactivate the front-seat pas‐
senger airbags; otherwise, there is an in‐
creased risk of injury to the child when the air‐
bags are activated, even with a child restraint
system.◀

Installing child restraint
systems

Only transport children younger than
13 years of age or shorter than 5 ft/150 cm in
the rear in child restraint systems provided in
accordance with the age, weight and size of
the child; otherwise, there is an increased risk
of injury in an accident.

Hints

Children 13 years of age or older must wear a
safety belt as soon as a suitable child restraint
system can no longer be used due to their age,
weight and size.◀

To select, mount and use child restraint sys‐
tems, observe the information provided by the
system manufacturer; otherwise, the protec‐
tive effect can be lost.◀

Children on the front passenger seat
Should it ever be necessary to use a child re‐
straint system in the front passenger seat,
make sure that the front, knee and side airbags
on the front passenger side are deactivated.
Automatic deactivation of front-seat passen‐
ger airbags, refer to page 98.

Manufacturer's information for child re‐
straint systems

Ensuring the stability of the child seat
When installing child restraint systems,
make sure that the child seat is securely fas‐
tened to the backrest of the seat. Angle and
headrest of the backrest might need to be ad‐
justed or possibly be removed. Make sure that
all backrests are securely locked. Otherwise
the stability of the child seat can be affected,
and there is an increased risk of injury because

Online Edition for Part no. 01 40 2 960 891 - II/15

57

Controls

Transporting children safely

of unexpected movement of the seat back‐
rest.◀

Child seat security

On the front passenger seat
Deactivating airbags
Deactivating the front-seat passenger
airbags
If a child restraint system is used in the front
passenger seat, deactivate the front-seat pas‐
senger airbags; otherwise, there is an in‐
creased risk of injury to the child when the air‐
bags are activated, even with a child restraint
system.◀
After installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the front passenger
side are deactivated.
Deactivate the front-seat passenger airbags
automatically, refer to page 98.

Seat position and height
Before installing a child restraint system, move
the front passenger seat as far back as possi‐
ble and adjust its height to the highest and
thus best possible position for the belt and to
offer optimal protection in the event of an acci‐
dent.
If the upper anchorage of the safety belt is lo‐
cated in front of the belt guide of the child seat,
move the passenger seat carefully forward un‐
til the best possible belt guide position is
reached.

The rear safety belts and the front passenger
safety belt can be permanently locked to fas‐
ten child restraint systems.
The front passenger safety belt can be perma‐
nently locked to fasten child restraint systems.

Locking the safety belt
1. Pull out the strap completely.
2. Secure the child restraint system with the
belt.
3. Allow the strap to be pulled in and pull it
tight against the child restraint system.
The safety belt is locked.

Unlocking the safety belt
1. Unbuckle the belt buckle.
2. Remove the child restraint system.
3. Allow the strap to be pulled in completely.

LATCH child restraint system
LATCH: Lower Anchors and Tether for Chil‐
dren.

Note
Follow manufacturer's information for
LATCH child restraint systems
To mount and use the LATCH child restraint
systems, observe the operating and safety in‐
formation from the system manufacturer; oth‐

58

Online Edition for Part no. 01 40 2 960 891 - II/15

Transporting children safely

Controls

erwise, the level of protection may be re‐
duced.◀

Child restraint fixing system with a
tether strap

Mounts for the lower LATCH anchors

Mounting points

The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child
is restrained by the internal harnesses.

The respective symbol shows the an‐
chor for the upper retaining strap.
Seats with an upper Top Tether are
marked with this symbol. It can be found on
the rear seat backrest or the rear window shelf.

Note
Properly engage the lower LATCH an‐
chors
Make sure that the lower LATCH anchors have
properly engaged and that the child restraint
system is resting snugly against the backrest;
otherwise, the degree of protection may be re‐
duced.◀

Note
Mounting eyelets
Use the mounting eyes only for the up‐
per retaining strap to secure child restraint
systems; otherwise, the mounting eyes could
be damaged.◀

Retaining strap guide

Position
The corresponding symbol shows the
mounts for the lower LATCH anchors.
Seats equipped with lower anchors are
marked with a pair, 2, of LATCH sym‐
bols. It is not recommended to use the
inner lower anchors of standard outer
LATCH positions to fasten a child restraint
system on the middle seat. Use the vehicle
seat belt instead for the middle seat.

Retaining strap
Make sure the upper retaining strap does
not run over sharp edges and is not twisted as
it passes to the top anchor. Otherwise, the
strap will not properly secure the child restraint
system in the event of an accident.◀

Before installing LATCH child
restraint systems
Pull the belt away from the area of the child re‐
straint system.

Assembly of LATCH child restraint
systems

1

Direction of travel

2

Upper retaining strap

1. Mount the child restraint system; refer to
the user's manual of the system.

3

Head restraint

2. Ensure that both LATCH anchors are prop‐
erly connected.

4

Rear window shelf

5

Mounting point/eye

6

Hook for upper retaining strap

Online Edition for Part no. 01 40 2 960 891 - II/15

59

Controls

Transporting children safely

Attaching the upper retaining strap to
the mounting point
1. Lift the cover over the mounting point.
2. Guide the upper retaining strap over the
head restraint.
3. Attach the hook of the retaining strap to
the mounting eye.
4. Tighten the retaining strap by pulling it
down.

60

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

Controls

Driving
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Start/Stop button, drive
readiness
The concept
The following ready states can
be attained by pressing the
Start/Stop button:
▷ Radio ready state on/off.
▷ Operating readiness on/off.
▷ Activating/deactivating drive readiness.
To activate drive readiness, press the brake
pedal.

Switching radio-ready state on/off
The radio-ready state is activated by pressing
the Start/Stop button in the following situa‐
tions:
▷ When the engine is running.
▷ When drive readiness is activated.
Some electronic systems/power consumers
remain ready for operation.
The radio-ready state is switched off automati‐
cally:
▷ After approx. 8 minutes.
▷ When the vehicle is locked using the cen‐
tral locking system.

▷ Shortly before the battery is discharged
completely, so that drive readiness is
maintained.
The radio-ready state remains active if, e.g.,
the operating readiness is automatically
switched off for the following reasons:
▷ Opening or closing the driver's door.
▷ Unfastening of the driver's safety belt.
▷ When automatically switching from low
beams to parking lights.

Operating readiness on
The switched on operating readiness corre‐
sponds to the switched on ignition for conven‐
tional vehicles.
Press the Start/Stop button, and do not press
on the brake pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator and warning lights in the
instrument cluster light up for a varied length
of time.
To save battery power when the engine is off,
switch off operating readiness and any unnec‐
essary electronic systems/power consumers.
Operating readiness is switched off automati‐
cally in the following situations:
▷ When locking the vehicle, even if the low
beams are activated.
▷ Shortly before the battery is discharged
completely, so that drive readiness is
maintained.

Note
If the engine is switched off and operating
readiness is switched on, the system automati‐
cally switches to the radio-ready state when
the door is opened if the lights are turned off
or, if correspondingly equipped, the daytime
running lights are activated.

Online Edition for Part no. 01 40 2 960 891 - II/15

61

Controls

Driving

Operating readiness off

Drive readiness in detail

Press the Start/Stop button again without
stepping on the brake.

The concept

All indicator lights in the instrument cluster go
out.

The following are the different drive readiness
variants:

To save battery power when the engine is off,
switch off operating readiness and any unnec‐
essary electronic systems/power consumers.

▷ Electric drive readiness, Silent Start, refer
to page 63.

Operating readiness is switched off automati‐
cally in the following situations while the vehi‐
cle is stationary and the engine is off:
▷ When locking the vehicle, and when the
low beams are activated.
▷ Shortly before the battery is discharged
completely, so that drive readiness is
maintained. This function is only available
when the low beams are turned off.
▷ When opening or closing the driver door, if
the driver's safety belt is unbuckled and
the low beams are turned off.
▷ While the driver's safety belt is unbuckled
with driver's door open and low beams off.
The low beams switch to parking lights after
approx. 15 minutes of no use.
Selector lever position P is automatically en‐
gaged when operating readiness is switched
off. In order for the vehicle to be able to roll,
e.g. into a car wash, heed the information re‐
garding washing in automatic car washes, refer
to page 187.

▷ Starting the combustion engine, refer to
page 63.
The vehicle is powered by the combustion
engine.

Hints
Do not leave the vehicle unattended
Do not leave the vehicle unattended with
drive readiness active; otherwise, it may pose a
risk.◀
Awareness of vehicle reduced when
driven in electric mode
When driving in electric mode, note that due to
the lack of engine noise pedestrians and other
traffic might pay less attention to the vehicle
due to missing engine noises. Please take spe‐
cial care when parking or leaving a parking
space.◀

Display on the Start/Stop button
General information

Drive readiness
When drive readiness is activated, the vehicle
is operational. Activated drive readiness is the
equivalent of a running engine in conventional
vehicles. Deactivated engine readiness is
equivalent to switching the ignition off.
Selector lever position P is automatically en‐
gaged when drive readiness is switched off. In
order for the vehicle to be able to roll, e.g. into
a car wash, heed the information regarding
washing in automatic car washes, refer to
page 187.
62

The vehicle is powered by the electric mo‐
tor.

Drive readiness is also displayed
through light indicators on the
Start/Stop button.

Lighting pulses orange
▷ After unlocking and opening the door.
▷ After switching off drive readiness.
When the brake pedal is depressed, the light‐
ing becomes more intense.

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

Lighting lights up steady blue
After drive readiness is switched on, light turns
blue. The vehicle is ready to drive. The READY
indicator lights up in the instrument cluster. In
addition, a signal sounds.

Lighting off
Drive readiness, operating readiness and
radio-ready state are turned off. The vehicle is
in the idle state. The charging cable may be
connected.

Activating drive readiness
1. Close the driver's door.
2. Depress the brake pedal.
3. Press the Start/Stop button.
Drive readiness is active, electric driving, Silent
Start or Start of the combustion engine.

Controls

Unattended vehicle
Do not leave the vehicle unattended with
engine running or drive readiness switched on;
otherwise, it may pose a risk.
Before leaving the vehicle, engage lever in po‐
sition P P, and set the parking brake; other‐
wise, the vehicle is not secured against rolling
away.◀
Repeated starting in quick succession
Avoid trying to start the vehicle repeat‐
edly and in quick succession. Otherwise, the
fuel is not burned or is inadequately burned,
posing a risk of overheating and damage to the
catalytic converter.◀
The combustion engine is started with Acti‐
vate drive, refer to page 63, readiness under
the following conditions:

Electric drive readiness, Silent Start

▷ The temperature of the hybrid system is
too high.

The vehicle is ready for driving without starting
the combustion engine.

▷ The charge level or temperature of the
high-voltage battery is too low.

Silent Start is possible if the requirements for
Electric driving, refer to page 64, are met.

Driving away

Display
READY indicates drive readi‐
ness.

1. Activate drive readiness.
2. Apply the brake and engage lever in posi‐
tion P D, SPORT or R.
3. Release the parking brake.
4. Drive away.

Deactivating drive readiness
Starting the combustion engine
Enclosed areas
Do not let the engine run in enclosed
areas, since breathing in exhaust fumes may
lead to loss of consciousness and death. The
exhaust gases contain carbon monoxide, an
odorless and colorless but highly toxic gas.◀

After parking the vehicle, you may hear noises
due to operation of the hybrid system, such as
for cooling of the high-voltage battery.
After stopping the vehicle:
1. Depress the brake pedal.
2. Set the parking brake.
3. Press the Start/Stop button.
The READY indicator goes out and a signal
sounds. In case of longer idle times, follow the
instructions in the Care chapter, refer to
page 190.

Online Edition for Part no. 01 40 2 960 891 - II/15

63

Controls

Driving

Before driving into a car wash
So that the vehicle can roll into a car wash ob‐
serve instructions for going into an automatic
car wash, refer to page 187.

Electric driving: ePOWER
Note
Awareness of vehicle reduced when
driven in electric mode
When driving in electric mode, note that, due
to the lack of engine noise, pedestrians and
other traffic might pay less attention to the ve‐
hicle due to missing engine noises. Please
take special care when parking or leaving a
parking space.◀

General information
In ePOWER, the vehicle is driven exclusively
electrically. ePOWER works automatically.

Auto eDRIVE
General information
With each starting operation, Auto eDRIVE is
activated using the Start/Stop button.
In Auto eDRIVE, the vehicle is driven in hybrid
mode corresponding to the various driving sit‐
uations, i.e. the drive combines combustion
engine and electric motor. The respectively
most effective drive type is preferred.

SAVE Battery, maintaining charging
state
Should it be necessary, e.g., to conserve the
electrical range for a later point in time on the
trip, the current charging state of the high-volt‐
age battery can be maintained with this func‐
tion.
The function is possible under the following
conditions:
▷ The fuel fill level is sufficient.

Depending on the charging state of the highvoltage battery, maximum speed and range
achieved can vary.

▷ Engaged selector lever position D

For electrical driving, certain Conditions, refer
to page 64, must be satisfied.

Switching on/off

Displays of the hybrid system, refer to
page 77.

2. "Auto eDRIVE"

Requirements

MAX eDRIVE

▷ State of charge and temperature of the
high-voltage battery is sufficient.

General information

▷ Selector lever position D or R engaged.
▷ The accelerator pedal is only slightly de‐
pressed.
▷ The possible maximum speed for electric
driving is not exceeded.
▷ The driver's door is closed.

64

▷ Drive mode Auto eDrive

1. "Settings"
3. "Hold state of charge"

Max eDRIVE forces electric driv‐
ing.
With Max eDRIVE, a speed of
approx. 75 mph, approx.
120 km/h is possible.
In special situations, the speed limit can con‐
sciously be exceeded by applying the acceler‐
ator pedal beyond the full throttle point, kick‐
down. The combustion engine is automatically

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

Controls

activated and switched into AUTO eDRIVE
mode.

Driving with the combustion
engine: POWER

Overview

Depending on the operating state, the com‐
bustion engine is automatically switched on:
▷ Selector lever position Sport is set.
▷ Speed for electric driving is exceeded.
▷ The high-voltage battery has an insuffi‐
cient charge.
▷ High-voltage battery is completely
charged, e.g., when driving downhill.
▷ For improved traction, e.g., on slippery
roads.

Activating Max eDRIVE

▷ System-related requirement for hybrid
components.

Press button.
▷ LED lights up: max eDRIVE is activated.
▷ LED goes out: max eDRIVE is deactivated.

Acoustic pedestrian protection
Depending on the country-specific version, the
system generates a continuous driving noise
during electric driving up to approx.
20 mph/30 km/h.
A speaker system broadcasts the noise to the
surroundings.
As a result, other traffic participants, e.g. pe‐
destrians or cyclists, can better perceive the
vehicle.

▷ Adapting to the course of the road when
destination guidance is activated.
When reducing speed, the combustion engine
is switched off when the conditions for electric
driving, refer to page 64, are met.

Assistance for the
combustion engine
Depending on the operating state, the electric
motor provides assistance with additional pro‐
pulsive power.

ASSIST

Switching on/off
Depending on the country-specific version, the
system is automatically active after every driv‐
ing-off or the system can be set on the Control
Display.
1. "Settings"
2. "Pedestr. Protection"
3. "Activate"

▷ During intense accelerations or on inclines.

During normal vehicle operation, the electric
motor assists the combustion engine, depend‐
ing on the situation.

eBOOST
Accelerating quickly, such as when passing,
requires the maximum available power from
the electric motor. To do this, apply extra force
to the accelerator pedal.

Online Edition for Part no. 01 40 2 960 891 - II/15

65

Controls

Driving

Energy recovery: CHARGE

Overview

The high-voltage battery is recharged in part
through energy recovery. The electric motor
acts as a generator when decelerating and
converts the kinetic energy into electrical en‐
ergy.
Energy can be recovered if the following condi‐
tions are met:
▷ The vehicle is moving.
▷ Speed higher than approx.
12 mph/20 km/h.
▷ Selector lever in selector lever position D,
R or S.
▷ The high-voltage battery is not fully
charged.
▷ Accelerator pedal is not operated.
Energy cannot be recovered in the following
situations:
▷ Selector lever position N is set.
▷ While drive stability control systems con‐
trol the vehicle, even though it is not indi‐
cated by an indicator light.
▷ The high-voltage battery is fully charged.
▷ When temperature of the high-voltage bat‐
tery is very low or very high.
With cold external temperatures, it is pos‐
sible that the energy recovery is tempora‐
rily unavailable after startup.

Parking brake

Parking brake

Setting
Apply parking brake and further secure
the vehicle if needed.
Set the parking brake firmly when parking; oth‐
erwise, the vehicle could roll. On steep upward
and downward inclines, further secure the ve‐
hicle, e.g., by turning the steering wheel in the
direction of the curb.◀
Take the remote control with you
Take the remote control with you when
leaving the vehicle so that children, e.g., can‐
not release the parking brake.◀
Pull the reel.
The LED lights up.
The indicator lamp lights up red. The
parking brake is set.

While driving

The concept

Use as emergency brake while driving:

The parking brake is used to prevent the vehi‐
cle from rolling when it is parked.

Pull the reel and hold it. The vehicle brakes
hard while the reel is being pulled.
The indicator lamp lights up red, a sig‐
nal sounds and the brake lights light
up.
A Check Control message is displayed.

66

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

If the vehicle is slowed down down to a speed
of approx. 2 mph/3 km/h the parking brake is
set.

Releasing
With drive readiness switched on:
Press the reel while stepping on the
brake pedal or selector lever position P is

2.

Controls

Press the reel while stepping on the
brake pedal or selector lever position P is
set.

It may take several seconds for the brake to be
put into operation. Any sounds associated with
this are normal.
The indicator lamp in the instrument
cluster goes out as soon as the parking
brake is ready for operation.

set.
The LED and indicator lamp go out.
The parking brake is released.

Automatic release
For automatic release, step on the accelerator
pedal.
The LED and indicator lamp go out.

Turn signal, high beams,
headlight flasher
Turn signal

The parking brake is automatically released
when you step on the accelerator:

Hints

▷ Drive readiness switched on.

Do not adjust the exterior mirror while
driving and when turn signals/hazard warning
flashers are on, or else the additional turn sig‐
nal lights in the exterior mirror are out of posi‐
tion and can't be seen.◀

▷ Drive mode engaged.
▷ Driver buckled in and doors closed.
Inadvertent operation of the accelerator
pedal
Make sure that the accelerator pedal is not op‐
erated unintentionally; otherwise, the vehicle is
set in motion and there is a risk of an acci‐
dent.◀

Do not adjust the exterior mirrors

Using turn signals

Malfunction
In the event of a failure or malfunction of the
parking brake, secure the vehicle against roll‐
ing using a wheel chock, e.g., when leaving it.

After a power failure

Press the lever beyond the resistance point.

Putting the parking brake into
operation

To switch off manually, press the lever to the
resistance point.

1. Switch on the ignition.

Unusually rapid flashing of the indicator lamp
indicates that a turn signal bulb has failed.

Online Edition for Part no. 01 40 2 960 891 - II/15

67

Controls

Driving

Triple turn signal activation
Press the lever to the resistance point.
The turn signal flashes three times.
The function can be activated or deactivated.
On the Control Display:

Do not activate wipers on dry windshield
Do not use the wipers if the windshield is
dry, as this may damage the wiper blades or
cause them to become worn more quickly.◀

Switching on

1. "Settings"
2. "Lighting"
3. "Triple turn signal"
Settings are stored for the profile currently in
use.

Signaling briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal
to flash.

Push wiper lever up.

High beams, headlight flasher

The lever automatically returns to its initial po‐
sition when released.
▷ Normal wiper speed: push up once.
The wipers switch to intermittent operation
when the vehicle is stationary.
▷ Fast wiper speed: press up twice or press
once beyond the resistance point.
Wipers change to normal speed when ve‐
hicle comes to standstill.

Switch off and brief wipe

▷ High beams, arrow 1.
▷ Headlight flasher, arrow 2.

Washer/wiper system
Switching the wipers on/off and brief
wipe
Hints

Push wiper lever down.

Do not activate wipers if frozen to wind‐
shield
Do not switch on the wipers if they are frozen
to the windshield; otherwise, the wiper blades
and the wiper motor may be damaged.◀

68

The lever automatically returns to its initial po‐
sition when released.
▷ Single wipe: press down once.
▷ To switch off normal wipe: press down
once.

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

▷ To switch off fast wipe: press down twice.

Interval mode or rain sensor

Controls

Setting the frequency or sensitivity of
the rain sensor

The concept
The rain sensor automatically controls the time
between wipes depending on the intensity of
the rainfall. The sensor is located on the wind‐
shield, directly behind the interior rearview mir‐
ror.

Activating/deactivating

Turn the thumbwheel.

Clean the windshield

Press button on the wiper lever.
Wiping is started. If the vehicle is equipped
with a rain sensor: LED in wiper lever lights up.
When wipers are frozen to windshield, wiper
operation is deactivated.
Deactivate the rain sensor in car washes
Deactivate the rain sensor when passing
through an automatic car wash; otherwise, un‐
intentional wiping can cause damages.◀

Pull the wiper lever towards you.
The system sprays washer fluid on the wind‐
shield and activates the wipers briefly.
Do not use the washer system at freezing
temperatures
Do not use the washers if fluid could freeze
onto the windshield which might impede your
viewing field. Therefore use antifreeze fluid.
Avoid using the washer when the reservoir is
empty; operation might damage pump.◀

Windshield washer nozzles
The windshield washer nozzles are automati‐
cally heated while the ignition is switched on.

Online Edition for Part no. 01 40 2 960 891 - II/15

69

Controls

Driving

Fold-out position of the wipers
Fold wipers back when you want to change the
blades or with pending low temperatures.
1. Switch the ignition on and off again.

tainer. Use BMW’s Windshield Washer Con‐
centrate or the equivalent.◀

Washer fluid reservoir

2. With icy conditions make sure that blades
are not frozen to the windshield.
3. Press the wiper lever up beyond the point
of resistance and hold it for approx. 3 sec‐
onds, until the wiper remains in a nearly
vertical position.
After the wipers are folded back down, the
wiper system must be reactivated.
Folding wipers back down
Before switching the ignition on, fold the
wipers back down to the windshield; other‐
wise, the wipers may become damaged when
they are activated.◀
1. Switch on the ignition.
2. Push wiper lever down. Wipers move to
their resting position and are ready again
for operation.

Open the cover.
All washer nozzles are supplied from one res‐
ervoir.
Fill with a mixture of windshield washer con‐
centrate and tap water and – if required – with a
washer antifreeze, according to the manufac‐
turer's recommendations.
Mix the washer fluid before adding to find the
right mixture.
Do not add windshield washer concentrate and
antifreeze undiluted and do not fill with pure
water; this could damage the wiper system.

Washer fluid
Hints
Antifreeze for washer fluid
Antifreeze is flammable and can cause
injury if it is used incorrectly.
Therefore, keep it away from possible sources
of ignition.

Do not mix window washer concentrates of dif‐
ferent manufacturers because they can clog
the windshield washer nozzles.
Recommended minimum fill quantity:
0.2 US gal/1 liter.

Only keep it in the closed original container
and inaccessible to children.

Steptronic Sport
transmission

Follow the notes and instructions on the con‐
tainer.

Selector lever positions

United States: The washer fluid mixture ratio is
regulated by the U.S. EPA and many individual
states; do not exceed the allowable washer
fluid dilution ratios limits that apply. Follow the
usage instructions on the washer fluid con‐

Position for normal vehicle operation. All gears
for forward travel are activated automatically.

70

D Drive

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

R is Reverse
Select only when the vehicle is stationary.

Controls

otherwise, the shift command will not be
executed: shift lock.
Press on the brake pedal until you
start driving

N Neutral:
The vehicle may roll. Use in automatic car
washes, e.g.
When drive readiness is off, selector lever po‐
sition P is automatically engaged.

To prevent the vehicle from creeping after
you select a gear, maintain pressure on the
brake pedal until you are ready to start.◀

Engaging D, R and N

P Park
Select only when the vehicle is stationary. The
drive wheels are blocked.
P is engaged automatically:
▷ After drive readiness is deactivated with
radio-ready state, refer to page 61, or op‐
erating readiness off, refer to page 62,
when selector lever position D or R is set.
▷ With operating readiness off if selector
lever position N is set.
▷ If the driver's safety belt is released, the
driver's door is opened, and the brake
pedal is not pressed while the vehicle is
stationary and selector lever position D or
R is set.

Briefly push the selector lever in the desired di‐
rection, beyond a resistance point if needed.
After releasing the selector lever, it returns to
its center position.

Before exiting the vehicle, make sure that se‐
lector lever position P is set. Otherwise, the ve‐
hicle may begin to move.
On uphill and downhill grades, secure the vehi‐
cle with the parking brake, refer to page 66,
before shifting into selector lever position P.

Kickdown
Kickdown is used to achieve maximum driving
performance. Step on the accelerator pedal
beyond the resistance point at the full throttle
position.

Press unlock button, in order to:
▷ Engage R.
▷ Shift out of P.

Engaging selector lever positions
▷ Selector lever position P can only be disen‐
gaged when the vehicle drive readiness is
engaged and the brake pedal is depressed.
▷ With the vehicle is stationary, press on the
brake pedal before shifting out of P or N;

Online Edition for Part no. 01 40 2 960 891 - II/15

71

Controls

Driving

Engaging P

The engaged selector lever position is dis‐
played in the instrument cluster, for instance
M1.
Once maximum engine speed is attained, or if
the engine is getting too hot, manual mode is
automatically upshifted as needed.

Switching to manual mode
▷ To shift down: press the selector lever for‐
ward.
Press button P.

▷ To shift up: pull the selector lever rear‐
wards.

Sport program and manual mode

The selector lever position will only be shifted
at appropriate engine and road speeds and
when necessary due to the temperature of the
drivetrain, for example downshifting is not pos‐
sible if the engine speed is too high.

Activating the sport program
By activating the Sport program, the vehicle is
tuned for sporty driving.

The selected gear is briefly displayed in the in‐
strument cluster, followed by the currently se‐
lected gear.

Ending the sport program/manual
mode
Push the selector lever to the right.
D is displayed in the instrument cluster.
Press the selector lever to the left out of selec‐
tor lever position D.

Automatic termination

The SPORT indication is dis‐
played in the instrument cluster.

Pressing the Driving Dynamics Control, refer to
page 111, or the eDRIVE button, refer to
page 65, terminates the Sport program of the
vehicle.

The sport program of the vehicle
is activated.

The selector lever automatically tips back into
the original position.

Activate manual mode
1. Press the selector lever to the left out of
selector lever position D.
2. Push the selector lever forward or pull it
backward.
Manual mode becomes active and the selector
lever position is changed.

72

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving

Shift paddles

Controls

Electronic unlocking of the
transmission lock
General information
Electronically unlock the transmission lock to
maneuver vehicle from the danger area.

Engaging selector lever position N
1. Depress the brake pedal.
2. Press and hold the Start/Stop button.
The shift paddles on the steering wheel allow
you to shift gears quickly while keeping both
hands on the steering wheel.
The shift paddles can be used only when Driv‐
ing with the combustion engine, refer to
page 65.
If Auto eDrive, refer to page 64, is activated,
the combustion engine starts first.
▷ Shift up: briefly pull right shift paddle.

3. Press and hold the selector lever into posi‐
tion N, until position N is displayed in the
instrument cluster.
A corresponding Check Control message
is displayed.
4. Release Start/Stop button and selector
lever.
5. Release brake.

▷ Shift down: briefly pull left shift paddle.

6. Maneuver the vehicle from the danger area
and secure it against moving on its own.

Gears will only be shifted at appropriate engine
and road speeds, for example downshifting is
not possible if the engine speed is too high.

Launch Control

The selected gear is briefly displayed in the in‐
strument cluster, followed by the current gear.
If the shift paddles on the steering wheel are
used to shift gears in automatic mode, the
transmission temporarily switches to manual
mode.

The concept
Launch Control enables optimum acceleration
on surfaces with good traction.

Hints
Component wear

In the manual mode, if there has been no ac‐
celeration or shifting of the shift paddles within
a certain amount of time, the transmission
switches back to automatic mode.

Do not use Launch Control too often;
otherwise, this may result in premature wear of
components due to the high stress placed on
the vehicle.◀

Displays in the instrument cluster

Do not use Launch Control during the break-in,
refer to page 138, period.

The selector lever position is dis‐
played, e.g.: P.

To increase vehicle stability, activate DSC
again as soon as possible.

Requirements
Launch Control is available when the combus‐
tion engine is warmed up, that is, after uninter‐

Online Edition for Part no. 01 40 2 960 891 - II/15

73

Controls

Driving

rupted driving with the combustion engine of
at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.

Start with launch control
With the combustion engine running:
1.

Press button.
TRACTION is displayed in the instrument
cluster and the indicator lamp for DSC OFF
lights up.

2. Engage selector lever position S.
3. With the left foot, forcefully press down on
the brake.
4. Press and hold down the accelerator pedal
beyond the resistance point at the full
throttle position.
A flag symbol is displayed in the instru‐
ment cluster.
5. The starting engine speed adjusts. Within
3 seconds, release the brake.
Before using Launch Control, allow the trans‐
mission to cool down for approx. 5 minutes.

74

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Controls

Displays
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and

systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Instrument cluster

The concept
The instrument cluster is a variable display.
Some of the displays in the instrument cluster
may differ from the way they are shown in this
Owner's Handbook.

If the program is changed or the Sport program
activated via the Driving Dynamics Control, the
display rendition adapts to the respective pro‐
gram.

Overview, instrument cluster

1

Speedometer

2

External temperature  83

3

Time  83

4

Messages, e.g. Check Control

7

Trip odometer  83

Navigation display

8

Selector lever position display  70

Driving Dynamics Control  111

9

READY indicator  63

5

Selection list, e.g., radio  86
6

Performance display  138
Variable drive mode displays  76

Online Edition for Part no. 01 40 2 960 891 - II/15

75

Controls

Displays

10 Overall range  83

12 Fuel gauge  82

11 Battery charge indicator  77

13 Computer  87

Variable drive mode displays

Sport program displays

ECO PRO displays
In ECO PRO, the instrument cluster switches
to the ECO PRO displays. These displays sup‐
port a driving style that saves on fuel con‐
sumption with more prominent representation
of the efficiency display and various ECO PRO
tips. ECO PRO, refer to page 145.

In the Sport program, the instrument cluster
switches the instrument cluster to the Sport
displays. These displays support a sporty driv‐
ing style with more prominent representation
of the tachometer and a clearer representation
of the eBOOST performance in the form of a
blue illuminated ring.

Charging screen

1

Charging status  155

4

Stationary climate control  156

2

End of charging time  155

5

Range for electric driving  155

Departure time with timer  156

6

Charging state  77

3

Maximum electrical range  155

76

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Controls

Displays of the hybrid
system

In addition, the range for electric driving is dis‐
played.

Displays in the instrument cluster

Drive readiness: READY

The concept
The following functions of the hybrid system
are displayed:
▷ High-voltage battery charge indicator, refer
to page 77.
▷ Max eDrive, refer to page 64

READY indicates drive readi‐
ness. For further information,
please refer to Drive readiness
in detail, refer to page 62.

Electric driving: ePOWER

▷ Maintaining charging state, refer to
page 78.
▷ Electric driving: ePOWER, refer to
page 77.
▷ Acceleration boost: eBOOST, refer to
page 78.
▷ Energy recovery: CHARGE, refer to
page 78.
▷ Drive readiness: READY, refer to
page 77.

The inner narrow blue stripe, arrow 1, marks
the range for electric driving.

The display depends on the system's operat‐
ing condition.

If a white mark is located in the range after the
stripe, arrow 2, the combustion engine is
switched on.

High-voltage battery charge indicator

In COMFORT and ECO PRO driving mode, the
specified power of the electric motor and the
internal combustion engine is indicated by a
white mark, arrow 3.
In ECO PRO mode, the range for efficient driv‐
ing style is colored blue, arrow 4.
For further information, please refer to Electric
driving: eDRIVE, refer to page 64.

High voltage
Even if no fill level bars are displayed next
to the battery symbol, the high-voltage system
is still under high voltage.◀
The fill level bars indicate the available charg‐
ing state of the high-voltage battery when op‐
erating readiness and drive readiness are
switched on.

Online Edition for Part no. 01 40 2 960 891 - II/15

77

Controls

Displays

Energy recovery: CHARGE

Maintaining charging state

The energy recovered is indicated in the COM‐
FORT and ECO PRO modes by four bars in the
CHARGE range. The high-voltage battery is
being charged. Depending on the available
output of the high-voltage battery, more or
less eBOOST could be recovered. If the highvoltage battery is completely charged, no en‐
ergy can be recovered. The four bars are
grayed-out.

In the Maintaining charging state mode, the
arrow indicates the charging state of the highvoltage battery that should be conserved for a
later point in the trip.

For further information, please refer to Energy
recovery CHARGE, refer to page 66.

Acceleration boost: eBOOST

▷ Gray arrow: maintaining charging state
mode deactivated.
▷ Orange arrow: maintaining charging state
mode activated.
Activating/deactivating the Maintaining charg‐
ing state mode, refer to page 64.

Indications on the Control Display
Displaying the hybrid system
utilization
1. "Vehicle info"
2. "eDRIVE"
3.

"Consumption history"

Hybrid system utilization
Five bars indicate the available output of the
electric motor for the eBOOST, refer to
page 31, acceleration boost. Depending on the
available output of the high-voltage battery,
there could be more or less eBOOST available.
If the high-voltage battery is completely dis‐
charged, all five bars are grayed-out.
Gray bars indicate the fuel consumption of the
combustion engine, arrow 1. Blue bars indicate
the percentage utilization of the functions of
the hybrid system, arrow 2.
78

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Controls

One bar indicates one minute.

Adapting to the course of the road

The combustion engine's average fuel con‐
sumption is indicated by a line above the bar
display and as a value to the right of the graph.

When the navigation system destination guid‐
ance is active, hybrid operation adapts to spe‐
cific route sections.

Displaying the energy flow
1. "Vehicle info"
2. "eDRIVE"
3.

"Energy flow"

Use of the hybrid system is optional.
Symbols in the energy flow display indicate
that a situation has been detected ahead and
hybrid operation is prepared for it.

Symbols

Energy flow of the hybrid system

Symbol Meaning
Downhill gradients: the system is
ready to charge the high-voltage
battery.
Target zone: ePOWER electric driv‐
ing is being prepared.

The following are displayed:
▷ Active components of the hybrid system.
▷ Direction of the energy flows:
Orange: energy flow of the combustion en‐
gine.
Blue: energy flow of the hybrid system
▷ Driving states:
▷ ePOWER.
▷ POWER.

Check Control
The concept
The Check Control system monitors functions
in the vehicle and notifies you of malfunctions
in the monitored systems.
A Check Control message is displayed as a
combination of indicator or warning lights and
text messages in the instrument cluster and in
the Head-up Display.
In addition, an acoustic signal may sound and a
text message may appear on the Control Dis‐
play.

▷ eBOOST.
▷ CHARGE.
▷ Coasting.

Indicator/warning lights

▷ Charging.
▷ System requirements of the hybrid system,
e. g., drive system not yet warmed up to
operating temperature.
▷ Driving requirement, e. g., transmission se‐
lector lever in the Sport position.

General information
The indicator and warning lights in the instru‐
ment cluster can light up in a variety of combi‐
nations and colors.
Several lights indicate function checks and
light up only temporarily when drive readiness
or operating readiness are activated.

Online Edition for Part no. 01 40 2 960 891 - II/15

79

Controls

Displays

Red lights

Yellow lights

Airbag system

Anti-lock Braking System ABS

Airbag system and belt tensioner are
defective.
Have the vehicle checked by the serv‐
ice center immediately.
Parking brake
The parking brake is set.

Avoid abrupt braking if possible. Brak‐
ing force boost in some cases defec‐
tive. Stop carefully. Take into account
longer brake travel. Have this checked
by the service center immediately.
DSC Dynamic Stability Control

For additional information, refer to Release
parking brake, refer to page 67.

Flashing: DSC controls the drive and
braking forces. The vehicle is stabi‐
lized. Reduce speed and adapt driving
profile to the driving circumstances.

Brake system

Illuminated: DSC failed. Have the system
checked by the service center.

Continue to drive moderately.
Have the vehicle checked by the serv‐
ice center immediately.

Front-end collision warning
Illuminated: advance warning is issued,
e.g., when there is the impending dan‐
ger of a collision or the distance to the
vehicle ahead is too small.
Increase distance.
Flashing: acute warning of the imminent dan‐
ger of a collision when the vehicle approaches
another vehicle at a relatively high differential
speed.
Intervention by braking or make an evasive ma‐
neuver.

DSC Dynamic Stability Control is
deactivated or DTC Dynamic Traction
Control is activated
Dynamic Stability Control DSC is
switched off or Dynamic Traction Con‐
trol DTC is switched on.
For additional information, refer to Dynamic
Stability Control, refer to page 109, and Dy‐
namic Traction Control, refer to page 110.
Tire Pressure Monitor TPM
Illuminated: the Tire Pressure Monitor
signals a loss of tire inflation pressure
in a tire.
Reduce your speed and stop cautiously. Avoid
sudden braking and steering maneuvers.

Pedestrian warning
If a collision with a person detected in
this way is imminent, the symbol lights
up and a signal sounds.

80

For additional information, refer to Dynamic
Stability Control DSC, refer to page 109.

Flashing and then continuously illuminated: no
flat tire or loss of tire inflation pressure can be
detected.
▷ Interference through systems or devices
with the same radio frequency: after leav‐

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

ing the area of the interference, the system
automatically becomes active again.
▷ TPM could not conclude the reset: perform
the reset of the system again.

Controls

Parking lights, headlight control
Parking lights or headlights are acti‐
vated.

▷ A wheel without TPM electronics is fitted:
have the service center check it if needed.

For additional information, refer to
Parking lights/low beams, headlight control, re‐
fer to page 92.

▷ Malfunction: have the system checked by
your service center.

High-beam Assistant

For more information, see Tire Pressure Moni‐
tor, refer to page 99.
Steering system

High-beam Assistant is switched on.
High beams are activated and off auto‐
matically as a function of the traffic sit‐
uation.

Steering system in some cases defec‐
tive.
Have the steering system checked by
the service center.

For additional information, refer to High-beam
Assistant, refer to page 94.
Cruise control
The system is switched on. It maintains
the speed that was set using the con‐
trol elements on the steering wheel.

Engine functions
Have the vehicle checked by the serv‐
ice center.
For additional information, refer to Onboard Diagnostics socket, refer to page 179.

Blue lights
High beams

Acoustic pedestrian protection inactive

High beams are activated.
For additional information, refer to High
beams, refer to page 68.

Acoustic pedestrian protection possi‐
bly defective.
Have the system checked by the serv‐
ice center.

General lamps
Check Control

Green lights

At least one Check Control message is
displayed or is stored. The symbol is
shown in the display of the instrument

Turn signal
Turn signal on.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal bulb
has failed.
For additional information, refer to Turn signal,
refer to page 67.

cluster.

Text messages
Text messages in combination with a symbol
in the instrument cluster explain a Check Con‐
trol message and the meaning of the indicator
and warning lights.

Online Edition for Part no. 01 40 2 960 891 - II/15

81

Controls

Displays

Supplementary text messages
Additional information, such as on the cause of
an error or the required action, can be called up
via Check Control.
With urgent messages the added text will be
automatically displayed on the Control Display.

Depending on the Check Control message, the
following functions can be selected.
"Owner's Manual"
Display additional information about the
Check Control message in the Integrated
Owner's Manual.
▷

Displaying stored Check Control
messages
On the Control Display:
1. "Vehicle info"

Symbols

▷

They are stored and can be displayed
again later.

"Service request"

2. "Vehicle status"
3.

"Check Control"

4. Select the text message.

Messages after trip completion
Special messages displayed while driving are
displayed again after drive readiness is
switched off.

Contact your service center.
▷

"Roadside Assistance"
Contact Roadside Assistance.

Fuel gauge

Hiding Check Control messages

Vehicle tilt position may cause the display to
vary.
Press the onboard computer button on the
turn signal lever.
▷ Some Check Control messages are dis‐
played continuously and are not cleared
until the malfunction is eliminated. If sev‐
eral malfunctions occur at once, the mes‐
sages are displayed consecutively.
These messages can be faded for approx.
8 seconds. After this time, they are dis‐
played again automatically.

Hints on refueling, refer to page 158.

Tachometer
The tachometer is only available in the Sport
program.
Always avoid engine speeds in the red warning
field. In this range, the fuel supply is inter‐
rupted to protect the engine.

▷ Other Check Control messages are faded
automatically after approx. 20 seconds.

82

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Controls

Engine oil temperature

Time

If the engine oil along with the engine becomes
too hot, a Check Control message is displayed.

The time is displayed in the instrument cluster.

Coolant temperature
If the coolant along with the engine becomes
too hot, a Check Control message is displayed.
Check the coolant level, refer to page 177.

Odometer and trip odometer
Display
▷ Odometer, scope of the computer, refer to
page 87.

Setting the time and time format, refer to
page 89.

Date
The date is displayed in the computer.
Setting the date and date format, refer to
page 89.

Range
Display

▷ Trip odometer, lower right display in the in‐
strument cluster.

Show/reset kilometers
Press the knob.
▷ With operating readiness
turned off, the time, the ex‐
ternal temperature and the
odometer are displayed.
▷ When operating readiness is switched on,
the trip odometer is reset.

The following information about the range is
displayed:
▷ Fill level bars of the fuel gauge, arrow 1.
▷ Charging state of the high-voltage battery,
arrow 2.

External temperature
If the indicator drops to +37 ℉/+3 ℃ or lower, a
signal sounds.
A Check Control message is displayed.
There is an increased risk of ice on roads.
Ice on roads
Even at temperatures above
+37 ℉/+3 ℃, roads might be icy.
Therefore, drive carefully on bridges and
shaded roads, e.g., to avoid the increased risk
of an accident.◀

▷ Range for electric driving, arrow 3.
▷ Total range from fuel supply and electric
range, arrow 4.
Two Check Control messages indicate a lim‐
ited total range.
The range display is dynamic and is influenced
by several factors, such as driving style.
Refuel promptly
Refuel no later than at a range of
30 miles/50 km or engine operation might fail
and damage might occur.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

83

Controls

Displays

Observe further Hints on refueling, refer to
page 158.

Service requirements

Symbols
Sym‐
bols

Description
No service is currently required.

The concept
The driving distance or the time to the next
scheduled maintenance is displayed briefly in
the instrument cluster after operating readi‐
ness is switched on.

The deadline for scheduled mainte‐
nance or a legally mandated inspec‐
tion is approaching.
The service deadline has already
passed.

Your service specialist can read the current
service requirements from your remote con‐
trol.

Entering appointment dates

Display
Data regarding the service status or legally
mandated vehicle inspections are automati‐
cally transmitted to your service center before
a service due date.

Detailed information on service
requirements

Enter the dates for the required inspections.
Make sure that the vehicle's date and time are
set correctly.
On the Control Display:
1. "Vehicle info"
2. "Vehicle status"

More information on the scope of service re‐
quired can be displayed on the Control Dis‐
play.

3.

On the Control Display:

6. Adjust the settings.

1. "Vehicle info"

7. Confirm.

2. "Vehicle status"
3.

"Service required"

4. "§ Vehicle inspection"
5. "Date:"

The entered date is stored.

"Service required"
Required maintenance procedures and le‐
gally mandated inspections are displayed.

4. Select an entry to call up detailed informa‐
tion.

Automatic Service Request
Data regarding the service status or legally
mandated vehicle inspections are automati‐
cally transmitted to your service center before
a service due date.
You can check when your service center was
notified.
On the Control Display:
1. "Vehicle info"
2. "Vehicle status"
3. Open "Options".
4. "Last Service Request"

84

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Gear shift indicator
The concept
The system recommends the most fuel effi‐
cient gear for the current driving situation.
Depending on the vehicle's features and coun‐
try version of the vehicle, the gear shift indica‐
tor is active in the manual mode of the Step‐
tronic transmission.
Suggestions to shift gear up or down are dis‐
played in the instrument cluster.
The gear shift indicator is not available when
Max eDRIVE is activated.
On vehicles without a gear shift indicator, the
engaged gear is displayed.

Controls

plays speed limits present on routes without
signs.

Hints
Personal judgment
The system cannot serve as a substitute
for the driver's personal judgment of the traffic
situation.
The system assists the driver and does not re‐
place the human eye.◀

At a glance
Camera

Displays
Example

Description
Fuel efficient gear is set.

Shift into fuel efficient gear.

Speed limit detection

The camera is found near the interior rearview
mirror.
Keep the windshield in the area behind the in‐
terior rearview mirror clean and clear.

Switching on/off

The concept

On the Control Display:

Speed limit detection
Speed limit detection uses a symbol in the
shape of a traffic sign to display the currently
detected speed limit. The camera in the area of
the interior rearview mirror detects traffic signs
at the edge of the road as well as variable over‐
head sign posts. Traffic signs with extra sym‐
bols for wet road conditions, etc. are also de‐
tected and compared with the vehicle's
onboard data, such as for the rain sensor, and
will be displayed depending on the situation.
The system takes into account the information
stored in the navigation system and also dis‐

1. "Settings"
2. "Instrument cluster"
3. "Speed limit information"
If speed limit detection is switched on, it can
be displayed on the info display in the instru‐
ment cluster.

Display
The following is displayed in the instrument
cluster:

Online Edition for Part no. 01 40 2 960 891 - II/15

85

Controls

Displays

Speed limit detection
Current speed limit.

Selection lists in the
instrument cluster
The concept

Speed limit detection is not
available.

Depending on your vehicle's optional features,
the following can be displayed or operated us‐
ing the buttons and the thumbwheel on the
steering wheel as well as the displays in the in‐
strument cluster and the Head-up Display:
▷ Current audio source.

Speed limit detection can also be displayed in
the Head-up Display.

System limits
The system may not be fully functional and
may provide incorrect information in the fol‐
lowing situations:

▷ Redial phone feature.
▷ Turn on voice activation system.
It also displays programs of the Driving Dy‐
namics Control.

Display

▷ In heavy fog, rain or snowfall.
▷ When signs are concealed by objects.
▷ When driving very close to the vehicle in
front of you.
▷ When driving toward bright lights.
▷ When the windshield behind the interior
rearview mirror is fogged over, dirty or cov‐
ered by a sticker, etc.
▷ In the event of incorrect detection by the
camera.

Depending on your vehicle's optional features,
the list in the instrument cluster can differ from
the illustration shown.

▷ If the speed limits stored in the navigation
system are incorrect.
▷ In areas not covered by the navigation sys‐
tem.
▷ When roads differ from the navigation,
such as due to changes in road routing.
▷ When passing buses or trucks with a
speed sticker.
▷ If the traffic signs are non-conforming.
▷ During calibration of the camera immedi‐
ately after vehicle shipment.

86

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Activating a list and adjusting the
setting

Controls

Information at a glance
Repeatedly pressing the button on the turn
signal lever calls up the following information in
the info display:
▷ Kilometers.
▷ Average consumption, fuel.
▷ Average consumption, fuel.
▷ Average consumption, electric.
▷ Current consumption, electric.

On the right side of the steering wheel, turn
the thumbwheel to activate the corresponding
list.
Using the thumbwheel, select the desired set‐
ting and confirm it by pushing the thumbwheel.

On-board computer

▷ Average speed.
▷ Date.
▷ Time of arrival.
▷ Distance to destination.

Adjusting displays for computer
You can select what information from the com‐
puter is to be displayed in the instrument clus‐
ter.

Display in the instrument cluster

On the Control Display:

The information from the computer is shown in
the lower left area of the instrument cluster.

1. "Settings"

Calling up information on the info
display

2. "Instrument cluster"
3. Select the desired displays.

Information in detail
Total range
The total range considers the
capacity of the fuel tank as well
as the electric energy in the
high-voltage battery.

Average fuel consumption
Press the onboard computer button on the
turn signal lever.
Information is displayed in the info display of
the instrument cluster.

The average fuel consumption is calculated on
the basis of various distances. Standstill with
drive readiness turned off is not considered.

Current fuel consumption
Displays the current energy consumption. The
efficiency of the driving can be monitored.

Online Edition for Part no. 01 40 2 960 891 - II/15

87

Controls

Displays

Average speed

Display on the Control Display

Periods when vehicle is parked with drive read‐
iness switched off are not included when cal‐
culating average speed.

Display the computer or trip computer on the
Control Display.

Resetting average values
Press and hold the onboard computer button
on the turn signal lever.

1. "Vehicle info"
2. "Onboard info" or "Trip computer"

Resetting the fuel consumption or
speed

Time of arrival

On the Control Display:

The estimated time of arrival is displayed if a
destination is entered in the navigation system
before the trip is started.

1. "Vehicle info"

The time must be correctly set.

2. "Onboard info"
3. "Consumpt." or "Speed"
4. "Yes"

Distance to destination
The distance remaining to the destination is
displayed if a destination is entered in the navi‐
gation system before the trip is started.
The distance to the destination is adopted au‐
tomatically.

Speed limit detection
Description of the speed limit detection, refer
to page 85, function.

Trip computer
The vehicle features two types of board com‐
puters.

Speed warning
The concept
Displays a speed, when reached, should cause
a warning to be issued.
The warning is repeated if the vehicle speed
drops below the set speed once by at least
3 mph/5 km/h.

Displaying, setting or changing the
speed warning
On the Control Display:

▷ "Onboard info": the values can be reset as
often as necessary.

1. "Settings"

▷ "Trip computer": the values provide an
overview of the current trip.

3. "Warning at:"

Resetting the trip computer
On the Control Display:

2. "Speed"
4. Turn the controller until the desired speed
is displayed.
5. Press the controller.
Speed warning is stored.

1. "Vehicle info"
2. "Trip computer"
3. "Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle came to a
standstill.
88

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Controls

Activating/deactivating the speed
warning

6. Turn the controller until the desired mi‐
nutes are displayed.

On the Control Display:

7. Press the controller.

1. "Settings"

The time is stored.

2. "Speed"

Setting the time format

3. "Warning"
4. Press the controller.

1. "Settings"
2. "Time/Date"

Setting your current speed as the
speed warning

3. "Format:"

On the Control Display:

The time format is stored.

1. "Settings"

4. Select the desired format.

Automatic time setting

2. "Speed"
3. "Select current speed"
4. Press the controller.
The current vehicle speed is stored as the
speed warning.

Depending on your vehicle's optional features,
the time, date and, if needed, the time zone are
updated automatically.
1. "Settings"
2. "Time/Date"
3. "Auto time set"

Settings on the Control
Display

Date
Setting the date

Time

1. "Settings"

Setting the time zone

2. "Time/Date"

1. "Settings"

3. "Date:"

2. "Time/Date"

4. Turn the controller until the desired day is
displayed.

3. "Time zone:"
4. Select the desired time zone.

5. Press the controller.

The time zone is stored.

6. Make the necessary settings for the month
and year.

Setting the time

The date is stored.

1. "Settings"

Setting the date format

2. "Time/Date"

1. "Settings"

3. "Time:"
4. Turn the controller until the desired hours
are displayed.
5. Press the controller.

2. "Time/Date"
3. "Format:"
4. Select the desired format.
The date format is stored.

Online Edition for Part no. 01 40 2 960 891 - II/15

89

Controls

Displays

Language

Depending on the light conditions, the bright‐
ness settings may not be clearly visible.

Setting the language
To set the language on the Control Display:
1. "Settings"
2. "Language/Units"
3. "Language:"
4. Select the desired language.
Settings are stored for the profile currently in
use.

Setting the voice dialog
Voice dialog for the voice activation system,
refer to page 27.

Units of measure

Activating/deactivating display of the
current vehicle position
If GPS geolocation has been activated, the cur‐
rent vehicle position can be displayed in the
BMW i Remote App or in the ConnectedDrive
customer portal.
1. "Settings"
2. "GPS tracking"
3. "GPS tracking"

Head-up Display
The concept

Setting the units of measure
To set the units for fuel consumption, route/
distance and temperature:
1. "Settings"
2. "Language/Units"
3. Select the desired menu item.
4. Select the desired unit.
Settings are stored for the profile currently in
use.

This system projects important information
into the driver's field of vision, e.g., the speed.

Brightness

The driver can get information without averting
his or her eyes from the road.

Setting the brightness
To set the brightness of the Control Display:

Display visibility

1. "Settings"

The visibility of the displays in the Head-up
Display is influenced by the following factors:

2. "Control display"

▷ Certain sitting positions.

3. "Brightness"
4. Turn the controller until the desired bright‐
ness is set.
5. Press the controller.
Settings are stored for the profile currently in
use.

90

▷ Objects on the cover of the Head-up Dis‐
play.
▷ Sunglasses with certain polarization filters.
▷ Wet roads.
▷ Unfavorable light conditions.

Online Edition for Part no. 01 40 2 960 891 - II/15

Displays

Controls

If the image is distorted, check the basic set‐
tings.

When the low beams are activated, the bright‐
ness of the Head-up Display can be addition‐
ally influenced using the instrument lighting.

Switching on/off

Settings are stored for the profile currently in
use.

1. "Settings"
2. "Head-Up Display"
3. "Head-Up Display"

Display

Adjusting the height
On the Control Display:
1. "Settings"
2. "Head-Up Display"

Overview

3. "Height"

▷ Speed.
▷ Navigation system.
▷ Check Control messages.
▷ Selection list from the instrument cluster.

4. Turn the controller.
Settings are stored for the profile currently in
use.

▷ Driver assistance systems.

Setting the rotation

Some of this information is only displayed
briefly as needed.

On the Control Display:

Selecting displays in the Head-up
Display

2. "Head-Up Display"

On the Control Display:

4. Turn the controller.

1. "Settings"

Settings are stored for the profile currently in
use.

2. "Head-Up Display"

1. "Settings"
3. "Rotation"

3. "Displayed information"

Special windshield

4. Select the desired displays in the Head-up
Display.

The windshield is part of the system.

Settings are stored for the profile currently in
use.

Setting the brightness
The brightness is automatically adjusted to the
ambient brightness.

The shape of the windshield makes it possible
to display a precise image.
A film in the windshield prevents double im‐
ages from being displayed.
Therefore, have the special windshield re‐
placed by a service center only.

The basic setting can be adjusted manually.
On the Control Display:
1. "Settings"
2. "Head-Up Display"
3. "Brightness"
4. Turn the controller.

Online Edition for Part no. 01 40 2 960 891 - II/15

91

Controls

Lights

Lights
Vehicle features and options

With driver's door open and operating readi‐
ness turned off, the exterior lighting will be
turned off automatically.

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Position of switch
: the vehicle's lights
light up on all sides, e.g., for parking.

Overview

When parking, it is preferable to switch on the
one-sided roadside parking lights, refer to
page 93.

Parking lights

Do not use the parking lights for extended pe‐
riods; otherwise, they might drain the battery
and it would then be impossible to start the en‐
gine.

Low beams
with operating readi‐
Position of switch
ness switched on: the low beams light up.

Welcome lights

1

Rear fog lights

2

Depending on the equipment: automatic
headlamp control, High-beam Assistant,
welcome lamps, daytime running lights

3

Lights off, daytime running lights

4

Parking lights / daytime running lights

5

Low beams/welcome lights

6

Instrument lighting

General information

92

,

Activating/deactivating
On the Control Display:
1. "Settings"
2. "Lighting"
3. "Welcome lights"
Settings are stored for the profile currently in
use.

Parking lights/low beams,
headlight control
Position of switch:

When the vehicle is parked, leave the switch in
position
or
: parking and interior lights
come on briefly when the vehicle is unlocked
depending on the ambient brightness.

Headlight courtesy delay feature
The low beams stay lit for a short while if the
headlight flasher is switched on after the radioready state is switched off.

,

Online Edition for Part no. 01 40 2 960 891 - II/15

Lights

Controls

Setting the duration

2. "Lighting"

On the Control Display:

3. "Daytime running lamps"

1. "Settings"

Settings are stored for the profile currently in
use.

2. "Lighting"
3. "Pathway lighting:"

Roadside parking lights

4. Set length of time.
Settings are stored for the profile currently in
use.

Automatic headlight control
Position of switch
: the low beams are acti‐
vated and off automatically, e.g., in tunnels, in
twilight or if there is precipitation. The indicator
lamp in the instrument cluster lights up.
When emerging from a tunnel during the day,
the low beams are not switched off immedi‐
ately but instead only after approx. 2 minutes.
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
Personal responsibility
The automatic headlight control cannot
serve as a substitute for your personal judg‐
ment in determining when to turn the lights on
in response to ambient lighting conditions.

The vehicle can be illuminated on one side.

Switching on
With operating readiness switched off, press
the lever either up or down past the resistance
point for approx. 2 seconds.

Switch off
Briefly press the lever to the resistance point in
the opposite direction.

E. g. the sensors are unable to detect fog or
hazy weather. To avoid safety risks under
these conditions, you should always switch on
the lights manually.◀

Variable light distribution

Daytime running lights

This variable light distribution ensures that the
roadway is still more effectively illuminated,
depending on the vehicle speed.

With the ignition switched on, the daytime run‐
ning lights light up in position
,
or
. After operating readiness is switched off,
the parking lights light up in position
.

Activating/deactivating
In some countries, daytime running lights are
mandatory, so it may not be possible to deacti‐
vate the daytime running lights.

The concept

The light distribution is automatically adjusted
to the speed. The freeway lights are activated
at speeds above 110 km/h after approx.
30 seconds or at a speed of 140 km/h.

Activating
Position of switch
switched on.

with the ignition

On the Control Display:
1. "Settings"

Online Edition for Part no. 01 40 2 960 891 - II/15

93

Controls

Lights

Malfunction
A Check Control message is displayed.
Variable light distribution is disrupted or failed.
Have the system checked as soon as possible.

High-beam Assistant
The concept
When the low beams are activated, this system
automatically switches the high beams on and
off. The procedure is controlled by a camera
on the front of the interior rearview mirror. The
assistant ensures that the high beams are acti‐
vated whenever the traffic situation allows. The
driver can intervene at any time and switch the
high beams non and off as usual.

When the low beams are on, the lights are au‐
tomatically brightened or dimmed.
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to
adequate illumination, e.g., in towns and cities.
The blue indicator lamp in the instru‐
ment cluster lights up when the system
switches on the high beams.

Switching the high beams on and off
manually

Note
Personal responsibility
The High-beam Assistant cannot serve
as a substitute for the driver's personal judg‐
ment of when to use the high beams. There‐
fore, manually reel off the high beams in situa‐
tions where required to avoid a safety risk.◀

Activating

▷ High beams on, arrow 1.
▷ High beams off/headlight flasher, arrow 2.
The High-beam Assistant can be switched off
when manually adjusting the light. To reacti‐
vate the High-beam Assistant, press the but‐
ton on the turn signal lever.

System limits
The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:
▷ In very unfavorable weather conditions,
such as fog or heavy precipitation.

1. Depending on the equipment, turn the light
switch into position
or
.
2. Press button on the turn signal lever, ar‐
row.
The indicator lamp in the instrument
cluster lights up.

94

▷ When detecting poorly-lit road users such
as pedestrians, cyclists, horseback riders
and wagons; when driving close to train or
ship traffic; and at animal crossings.
▷ In tight curves, on hilltops or in depres‐
sions, in cross traffic or half-obscured on‐
coming traffic on freeways.
▷ In poorly-lit towns and cities and in the
presence of highly reflective signs.

Online Edition for Part no. 01 40 2 960 891 - II/15

Lights

▷ At low speeds.
▷ When the windshield behind the interior
rearview mirror is fogged over, dirty or cov‐
ered with stickers, etc.

Controls

To reel off permanently: press the button for
approx. 3 seconds.
Switch back on: press button.

Reading lights

Instrument lighting

Press button.
Reading lights are located in the front next to
the interior light.

Adjusting
The parking lights or low beams
must be switched on to adjust
the brightness.
Adjust the brightness with the
thumbwheel.

Ambient light
Depending on your optional features lighting
can be adjusted for some lights in the interior.

Selecting color scheme
On the Control Display:

Interior lights

1. "Settings"

General information
The interior lights, footwell lights, access lights
and courtesy lights are controlled automati‐
cally.
Thumb wheel for the instrument lighting con‐
trols brightness of some of these features.

2. "Lighting"
3. "Lighting design"
4. Select desired setting.
To deactivate the ambient light: "Off".

Setting the brightness
On the Control Display:

Overview

1. "Settings"
2. "Lighting"
3. "Brightness:"
4. Adjust the brightness.

1

Interior lights

2

Reading lamp

Switching the interior lights on and off
Press button.

Online Edition for Part no. 01 40 2 960 891 - II/15

95

Controls

Safety

Safety
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to

the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Airbags

1

Front airbag, driver

4

Side airbag

2

Front airbag, front passenger

5

Knee airbags

3

Head airbag

Front airbags

Side airbags

Front airbags help protect the driver and front
passenger by responding to frontal impacts in
which safety belts alone would not provide ad‐
equate restraint.

In a lateral impact, the side airbag supports the
side of the body in the chest and lap area.

Head airbags
In a lateral impact, the head airbag supports
the head.

96

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety

Knee airbag
The knee airbag supports the legs in a frontal
impact.

Protective action
Airbags are not triggered in every impact situa‐
tion, e.g., in less severe accidents or rear-end
collisions.
Information on how to ensure the optimal
protective effect of the airbags
▷ Keep at a distance from the airbags.
▷ Always grasp the steering wheel on the
steering wheel rim, holding your hands at
the 3 o'clock and 9 o'clock positions, to
keep the risk of injury to your hands or
arms as low as possible when the airbag is
triggered.
▷ There should be no person, animals, or ob‐
jects between an airbag and a person.
▷ Do not use the cover of the front airbag on
the front passenger side as a storage area.
▷ Dashboard and windshield on the front
passenger side must stay clear - do not at‐
tach adhesive labels or coverings and do
not attach brackets or cables, e. g., for GPS
devices or' mobile phones.
▷ Make sure that the front passenger is sit‐
ting correctly, i.e., keeps his or her feet and
legs in the footwell; otherwise, leg injuries
might occur when front airbag is activated.
▷ Do not place slip covers, seat cushions or
other objects on the front passenger seat
that are not approved specifically for seats
with integrated side airbags.
▷ Do not hang pieces of clothing, such as
jackets, over the backrests.
▷ Make sure that occupants keep their heads
away from the side airbag and do not rest
against the head airbag; otherwise, injuries
might occur when airbag is activated.
▷ Do not remove the airbag system.
▷ Do not remove the steering wheel.

Controls

▷ Do not apply adhesive materials to the air‐
bag cover panels, do not cover them or
modify them in any way.
▷ Never modify either the individual compo‐
nents or the wiring in the airbag system.
This also applies to steering wheel covers,
the dashboard, the seats, the roof pillars
and the sides of the roofliner.◀
Even when you follow all instructions very
closely, injury from contact with the airbags
cannot be ruled out in certain situations.
The ignition and inflation noise may lead to
short-term and, in most cases, temporary
hearing impairment in sensitive individuals.
Malfunction, deactivation and after de‐
ploying the airbags
Do not touch the individual components imme‐
diately after the system has been triggered;
otherwise, you may risk burns.
Only have the airbags checked, repaired or dis‐
mantled and the airbag generator scrapped by
the service center or an authorized repair shop
for handling explosives.
Non-professional attempts to service the sys‐
tem could lead to failure in an emergency or
unintentional activation of the airbag - both
may lead to injury.◀
Warnings and information on the airbags are
also found on the sun visors.

Functional readiness of the airbag
system
With operating readiness turned on
warning light in the instrument cluster
lights up briefly indicating airbag sys‐
tem and belt tension are functional.

Airbag system malfunctioning
▷ Warning lamp does not come on when op‐
erating readiness is turned on.
▷ The warning lamp lights up continuously.

Online Edition for Part no. 01 40 2 960 891 - II/15

97

Controls

Safety

In case of a malfunction have airbag sys‐
tem checked immediately.
In case of a malfunction have airbag system
checked immediately; otherwise, there is a risk
that the system does not function as expected
in case of a severe accident.◀

▷ Do not attach covers, cushions, ball mats
or other items to the front passenger seat
unless they are specifically recommended
by your vehicle's manufacturer.
▷ Do not place any electronic devices on the
passenger seat if a child restraint system is
to be installed on it.

Automatic deactivation of the frontseat passenger airbags

▷ Do not place objects under the seat that
could press against the seat from below.

The system reads if the front passenger seat is
occupied by measuring the human body's re‐
sistance.

▷ No moisture in or on the seat.

Front, knee and side airbag on the front pas‐
senger's side are either activated or deacti‐
vated.

Indicator lamp for the front-seat
passenger airbags

Leave feet in the footwell
Make sure that the front passenger
keeps his or her feet in the footwell; otherwise,
proper functioning of the front passenger air‐
bag might not be assured.◀
Child restraint fixing system in the front
passenger seat
Before transporting a child on the front pas‐
senger seat, refer to the safety notes and in‐
structions for children on the front passenger
seat, see Children.◀

Malfunction of the automatic
deactivation system
When transporting older children and adults,
the front-seat passenger airbags may be deac‐
tivated in certain sitting positions. In this case,
the indicator lamp for the front-seat passenger
airbags lights up.

The indicator lamp for the front-seat passen‐
ger airbags indicates the operating state of the
front-seat passenger airbags.
The lamp indicates whether the airbags are ei‐
ther activated or deactivated.
▷ The indicator lamp lights up
when a child is properly
seated in a child restraint fix‐
ing system or when the seat
is empty. The airbags on the
front passenger side are not
activated.

In this case, change the sitting position so that
the front-seat passenger airbags are activated
and the indicator lamp goes out.

▷ The indicator lamp does not light up when,
e.g., a correctly seated person of sufficient
size is detected on the seat. The airbags
on the front passenger side are activated.

If it is not possible to activate the airbags, have
the person sit in the rear.

Detected child seats

To enable correct recognition of the occupied
seat cushion

98

The system generally detects children seated
in a child seat, particularly in child seats re‐
quired by NHTSA when the vehicle was manu‐

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety

factured. After installing a child seat, make
sure that the indicator lamp for the front-seat
passenger airbags lights up. This indicates
that the child seat has been detected and the
front-seat passenger airbags are not activated.

Strength of the driver's and front-seat
passenger airbag
The explosive power that activates driver's/
front passenger's airbags very much depends
on the positions of the driver's/front passeng‐
er's seat.

Controls

Tire Pressure Monitor TPM
The concept
The system monitors tire inflation pressure in
the four mounted tires. The system warns you
if there is a significant loss of pressure in one
or more tires. For this purpose, sensors in the
tire valves measure the tire inflation pressure
and tire temperature.

Hints
Tire damage due to external factors

With a respective message appearing on Con‐
trol Display calibrate the front seats to keep
the accuracy of this function over the longterm.

Sudden tire damage caused by external
circumstances cannot be recognized in ad‐
vance.◀

Calibrating the front seats

With use of the system observe further infor‐
mation found under Tire inflation pressure, re‐
fer to page 163.

A corresponding message appears on the
Control Display.
1. Press the reel and move the respective
seat all the way forward.
2. Press the reel forward again. The seat still
moves forward slightly.
3. Readjust the seat to the desired position.
The calibration procedure is completed when
the message on the Control Display disap‐
pears.
If the message continues to be displayed, re‐
peat the calibration.
If the message does not disappear after a re‐
peat calibration, have the system checked as
soon as possible.
Unobstructed area of movement
Ensure that the area of movement of the
seats is unobstructed to avoid personal injury
or damage to objects.◀

Functional requirements
The system must have been reset with the
correct tire inflation pressure; otherwise, relia‐
ble signaling of tire inflation pressure loss is
not assured.
Reset the system after each adjustment of the
tire inflation pressure and after every tire or
wheel change.
Always use wheels with TPM electronics to
ensure that the system will operate properly.

Status display
The current status of the Tire Pressure Moni‐
tor TPM can be displayed on the Control Dis‐
play, e.g., whether or not the TPM is active.
On the Control Display:
1. "Vehicle info"
2. "Vehicle status"
3.

"Tire Pressure Monitor (TPM)"

The status is displayed.

Online Edition for Part no. 01 40 2 960 891 - II/15

99

Controls

Safety

Status control display
Tire and system status are indicated by the
color of the wheels and a text message on the
Control Display.

All wheels green
System is active and will issue a warning rela‐
tive to the tire inflation pressures stored during
the last reset.

5. Reset tire inflation pressure:"Perform
reset".
6. Drive away.
The tires are shown in gray and the status is
displayed.
After driving faster than 19 mph/30 km/h for a
short period, the set tire inflation pressures are
accepted as reference values. The reset is
completed automatically while driving.
The progress of the reset is displayed.

One wheel is yellow
A flat tire or major drop in inflation pressure in
the indicated tire.

All wheels are yellow
A flat tire or major drop in inflation pressure in
several tires.

After a successfully completed Reset, the
wheels on the Control Display are shown in
green and "Tire Pressure Monitor (TPM)
active" is displayed.
You may interrupt this trip at any time. When
you continue the reset resumes automatically.

Low tire pressure message

Wheels, gray
The system cannot detect a flat tire. Reasons
for this may be:

The yellow warning lamp lights up. A
Check Control message is displayed.

▷ The system is being reset.

▷ There is a flat tire or a major loss in
tire inflation pressure.

▷ Malfunction.

Status information
The status control display additionally shows
the current tire inflation pressures and, de‐
pending on the model, tire temperatures. It
shows the actual values read; they may vary
depending on driving style or weather condi‐
tions.

Carry out reset
Reset the system after each adjustment of the
tire inflation pressure and after every tire or
wheel change.
On the Control Display and on the vehicle:
1. "Vehicle info"
"Perform reset"

4. Switch on drive readiness – do not drive
off.

100

Reduce your speed and stop cautiously. Avoid
sudden braking and steering maneuvers. Do
not continue driving, and contact the service
center.
If a Mobility System is not available, contact
the service center.
A low tire inflation pressure might turn on DSC
Dynamic Stability Control.

Required tire inflation pressure check
message
A Check Control message is displayed in the
following situations

2. "Vehicle status"
3.

▷ No reset was performed for the system.
The system therefore issues a warning
based on the tire inflation pressures before
the last reset.

▷ The system has detected a wheel change,
but no reset was done.

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety

▷ Inflation was not carried out according to
specifications.
▷ The tire inflation pressure has fallen below
the level of the last confirmation.
In this case:
▷ Check the tire pressure and correct as
needed.
▷ Carry out a reset of the system after a tire
change.

System limits
The system does not function properly if a re‐
set has not been carried out, e.g., a flat tire is
reported though tire inflation pressures are
correct.
The tire inflation pressure depends on the
tire's temperature. Driving or exposure to the
sun will increase the tire's temperature, thus
increasing the tire inflation pressure. The tire
inflation pressure is reduced when the tire
temperature falls again. These circumstances
may cause a warning when temperatures fall
very sharply.

Malfunction
The yellow warning lamp flashes and
then lights up continuously. A Check
Control message is displayed. No flat
tire or loss of tire inflation pressure can be de‐
tected.
Display in the following situations:
▷ A wheel without TPM electronics is fitted:
have the service center check it if needed.
▷ Malfunction: have the system checked by
your service center.
▷ TPM was unable to complete the reset.
Reset the system again.
▷ Interference through systems or devices
with the same radio frequency: after leav‐
ing the area of the interference, the system
automatically becomes active again.

Controls

Declaration according to NHTSA/
FMVSS 138 Tire Pressure Monitoring
System
Each tire, including the spare (if provided)
should be checked monthly when cold and in‐
flated to the inflation pressure recommended
by the vehicle manufacturer on the vehicle
placard or tire inflation pressure label. (If your
vehicle has tires of a different size than the size
indicated on the vehicle placard or tire inflation
pressure label, you should determine the
proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has
been equipped with a tire pressure monitoring
system (TPMS) that illuminates a low tire pres‐
sure telltale when one or more of your tires is
significantly under-inflated. Accordingly, when
the low tire pressure telltale illuminates, you
should stop and check your tires as soon as
possible, and inflate them to the proper pres‐
sure. Driving on a significantly under-inflated
tire causes the tire to overheat and can lead to
tire failure. Under-inflation also reduces fuel ef‐
ficiency and tire tread life, and may affect the
vehicle's handling and stopping ability. Please
note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver's
responsibility to maintain correct tire pressure,
even if under-inflation has not reached the
level to trigger illumination of the TPMS low
tire pressure telltale. Your vehicle has also
been equipped with a TPMS malfunction indi‐
cator to indicate when the system is not oper‐
ating properly. The TPMS malfunction indica‐
tor is combined with the low tire pressure
telltale. When the system detects a malfunc‐
tion, the telltale will flash for approximately one
minute and then remain continuously illumi‐
nated. This sequence will continue upon sub‐
sequent vehicle start-ups as long as the mal‐
function exists. When the malfunction indicator
is illuminated, the system may not be able to
detect or signal low tire pressure as intended.
TPMS malfunctions may occur for a variety of
reasons, including the installation of replace‐
ment or alternate tires or wheels on the vehicle

Online Edition for Part no. 01 40 2 960 891 - II/15

101

Controls

Safety

that prevent the TPMS from functioning prop‐
erly. Always check the TPMS malfunction tell‐
tale after replacing one or more tires or wheels
on your vehicle to ensure that the replacement
or alternate tires and wheels allow the TPMS
to continue to function properly.

At a glance
Button in the vehicle

Intelligent Safety
The concept
Intelligent Safety enables central operation of
the driver assistance system.
The intelligent safety systems can hel prevent
an imminent collision.
▷ Front-end collision warning with City Brak‐
ing function, refer to page 103.
▷ Pedestrian warning with City Braking func‐
tion, refer to page 105.

Hints

Switching on/off
Some Intelligent Safety systems are automati‐
cally active after every departure. Some Intelli‐
gent Safety systems activate according to the
last setting.
Press button briefly:

Personal responsibility
The system does not serve as a substi‐
tute for the driver's personal judgment of the
traffic situation.
Be aware of the traffic situation and the vehi‐
cle's surroundings at all times, otherwise acci‐
dents are still possible despite all warnings.◀
Adapting your speed and driving style
The displays and warnings of the system
do not relieve the driver of the responsibility to
adapt his or her driving speed and style to the
traffic conditions.◀

▷ The menu for the intelligent safety
system is displayed. The systems
are individually switched off ac‐
cording to their respective set‐
tings.
▷ LED lights up orange or goes out respec‐
tive to their individual settings.
Adjust as needed. Individual settings are
stored for the profile currently in use.
Press button again:
▷ All Intelligent Safety systems are
activated.
▷ The LED lights up green.

Be alert
Due to system limitations, warnings may
be not issued at all, or may be issued late or
improperly. Therefore, always be alert and
ready to intervene; otherwise, there is the risk
of an accident.◀

102

Intelligent Safety button

Hold down button:
▷ All Intelligent Safety systems are
turned off.
▷ The LED goes out.

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety

Front-end collision warning
with City Braking function
The concept
The ystem can help prevent accidents. If an
accident cannot be prevented, the system will
help reduce the collision speed.
The system sounds a warning before an immi‐
nent collision and actuates brakes independ‐
ently if needed.
The automatic braking intervention is done
with limited force and duration.
A camera in the area of the rearview mirror
controls the system.
The front-end collision warning is available
even if cruise control has been deactivated.
With the vehicle approaching another vehicle
intentionally the collision warning is delayed
avoiding false alarm.

Controls

Hints
Personal responsibility
The system does not serve as a substi‐
tute for the driver's personal judgment of the
traffic situation.
Be aware of the traffic situation and the vehi‐
cle's surroundings at all times, otherwise acci‐
dents are still possible despite all warnings.◀
Adapting your speed and driving style
The displays and warnings of the system
do not relieve the driver of the responsibility to
adapt his or her driving speed and style to the
traffic conditions.◀
Be alert
Due to system limitations, warnings may
be not issued at all, or may be issued late or
improperly. Therefore, always be alert and
ready to intervene; otherwise, there is the risk
of an accident.◀

General information
The system warns at two levels of an imminent
danger of collision at speeds from approx.
3 mph/5 km/h. Time of warnings may vary with
the current driving situation.

At a glance
Button in the vehicle

Appropriate braking kicks in at speeds of up to
35 mph/60 km/h.

Detection range

Intelligent Safety button

It responds to objects if they are detected by
the system.

Online Edition for Part no. 01 40 2 960 891 - II/15

103

Controls

Safety

Camera

Setting the warning time
The warning time can be set via iDrive.
1. "Settings"
2. "Frontal Coll. Warning"
3. Activate the desired time on the Control
Display.
The selected time is stored for the profile cur‐
rently in use.

The camera is found near the interior rearview
mirror.
Keep the windshield in the area behind the in‐
terior rearview mirror clean and clear.

Switching on/off

The system is automatically active after every
driving-off.

Switching on/off manually
Press button briefly:
▷ The menu for the intelligent safety
system is displayed. The systems
are individually switched off ac‐
cording to their respective set‐
tings.
▷ LED lights up orange or goes out respec‐
tive to their individual settings.
Adjust as needed. Individual settings are
stored for the profile currently in use.
Press button again:
▷ All Intelligent Safety systems are
activated.
▷ The LED lights up green.
Hold down button:
▷ All Intelligent Safety systems are
turned off.

104

Display
If a collision with a recognized vehicle is immi‐
nent a warning symbol appears in the instru‐
ment cluster and in the Head-Up Display.
Symbol Measure

Switching on automatically

▷ The LED goes out.

Warning with braking function

The vehicle lights up red: prewarn‐
ing.
Brake and increase distance.
The vehicle flashes red and an
acoustic signal sounds: acute warn‐
ing.
You are requested to intervene by
braking or make an evasive maneu‐
ver.

Prewarning
This warning is issued, e.g., when there is the
impending danger of a collision or the distance
to the vehicle ahead is too small.
The driver must intervene actively when there
is a prewarning.

Acute warning with braking function
Warning of the imminent danger of a collision
when the vehicle approaches another object at
a relatively high differential speed.
The driver must intervene actively when there
is an acute warning. If necessary, the driver is
assisted by a minor automatic braking inter‐
vention in a possible risk of collision.

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety

Controls

Acute warnings can also be triggered without
previous prewarning.

▷ If the driving stability control systems are
deactivated, e.g. DSC OFF.

Braking intervention

▷ If the field of view of the camera in the mir‐
ror is dirty or obscured.

The warning prompts the driver himself/herself
to react. During a warning, the maximum brak‐
ing force is used. Premise for the brake boos‐
ter is sufficiently quick and hard stepping on
the brake pedal. The system can assist with
some braking intervention if there is risk of a
collision. At low speeds vehicles may thus
come to a complete stop.
The braking intervention is executed only if
DSC Dynamic Stability Control is switched on.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by ac‐
tively moving the steering wheel.
Object detection can be restricted. Limitations
of the detection range and functional restric‐
tions are to be considered.

▷ Up to 10 seconds after drive readiness is
established.
▷ During calibration of the camera immedi‐
ately after vehicle shipment.
▷ If there is constant blinding effects be‐
cause of oncoming light, e. g., from the sun
low in the sky.

Warning sensitivity
The more sensitive the warning settings are,
e.g. the warning time, the more warnings are
displayed. However, there may also be an ex‐
cess of false warnings.

System limits

Pedestrian warning with city
braking function

Detection range

The concept

The system's detection potential is limited.
Thus a warning might not be issued or be is‐
sued late.
E. g. the following situations may not be de‐
tected:
▷ Slow moving vehicles when you approach
them at high speed.
▷ Vehicles that suddenly swerve in front of
you, or sharply decelerating vehicles.
▷ Vehicles with an unusual rear appearance.
▷ Two-wheeled vehicles ahead of you.

Functional limitations
The system may not be fully functional in the
following situations:
▷ In heavy fog, rain, sprayed water or snow‐
fall.

The ystem can help prevent accidents with pe‐
destrians.
The system issues a warning in the city driving
speed area if there is imminent danger of a col‐
lision with pedestrians and includes a braking
function.
The camera in the area of the rearview mirror
controls the system.

General information
In daylight the system warns of possible colli‐
sions with pedestrians at speeds from about
6 mph/10 km/h to about 35 mph/60 km/h
shortly before a collision the system supports
you with a braking intervention.
Under those circumstances it reacts to people
who are within the detection range of the sys‐
tem.

▷ In tight curves.

Online Edition for Part no. 01 40 2 960 891 - II/15

105

Controls

Safety

Detection range

At a glance
Button in the vehicle

The detection area in front of the vehicle is div‐
ided into two areas.
▷ Central area, arrow 1, directly in front of the
vehicle.
▷ Expanded area, arrow 2, to the right and
left.

Intelligent Safety button

Camera

A collision is imminent if pedestrians are lo‐
cated within the central area. A warning is is‐
sued about pedestrians who are located within
the extended area only if they are moving in
the direction of the central area.

Hints
Personal responsibility
The system does not serve as a substi‐
tute for the driver's personal judgment of the
traffic situation.
Be aware of the traffic situation and the vehi‐
cle's surroundings at all times, otherwise acci‐
dents are still possible despite all warnings.◀
Adapting your speed and driving style
The displays and warnings of the system
do not relieve the driver of the responsibility to
adapt his or her driving speed and style to the
traffic conditions.◀
Be alert
Due to system limitations, warnings may
be not issued at all, or may be issued late or
improperly. Therefore, always be alert and
ready to intervene; otherwise, there is the risk
of an accident.◀

106

The camera is found near the interior rearview
mirror.
Keep the windshield in the area behind the in‐
terior rearview mirror clean and clear.

Switching on/off
Switching on automatically
The system is automatically active after every
driving-off.

Switching on/off manually
Press button briefly:
▷ The menu for the intelligent safety
system is displayed. The systems
are individually switched off ac‐
cording to their respective set‐
tings.

Online Edition for Part no. 01 40 2 960 891 - II/15

Safety

▷ LED lights up orange or goes out respec‐
tive to their individual settings.
Adjust as needed. Individual settings are
stored for the profile currently in use.
Press button again:
▷ All Intelligent Safety systems are
activated.
▷ The LED lights up green.

Controls

Object detection can be restricted. Limitations
of the detection range and functional restric‐
tions are to be considered.

System limits
Detection range
The detection potential of the camera is lim‐
ited.

Hold down button:

Thus a warning might not be issued or be is‐
sued late.

▷ All Intelligent Safety systems are
turned off.

E. g. the following situations may not be de‐
tected:

▷ The LED goes out.

▷ Partially covered pedestrians.

Warning with braking function

▷ Pedestrians that are not detected as such
because of the viewing angle or contour.
▷ Pedestrians outside of the detection range.

Display
If a collision with a person detected in this way
is imminent, a warning symbol appears on the
instrument cluster and in the Head-up Display.
The red symbol is displayed and a sig‐
nal sounds.
Intervene immediately by braking or make an
evasive maneuver.

Braking intervention
The warning prompts the driver himself/herself
to react. During a warning, the maximum brak‐
ing force is used. Premise for the brake boos‐
ter is sufficiently quick and hard stepping on
the brake pedal. The system can assist with
some braking intervention if there is risk of a
collision. At low speeds vehicles may thus
come to a complete stop.
The braking intervention is executed only if
DSC Dynamic Stability Control is switched on.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by ac‐
tively moving the steering wheel.

▷ Pedestrians having a body size less than
32 in/80 cm.

Functional limitations
The system may not be fully functional or may
not be available in the following situations:
▷ In heavy fog, rain, sprayed water or snow‐
fall.
▷ In tight curves.
▷ If the driving stability control systems are
deactivated, e.g. DSC OFF.
▷ If the camera viewing field or the front
windshield are dirty or covered.
▷ Up to 10 seconds after drive readiness is
established.
▷ During calibration of the camera immedi‐
ately after vehicle shipment.
▷ If there is constant blinding effects be‐
cause of oncoming light, e. g., from the sun
low in the sky.
▷ When it is dark outside.

Online Edition for Part no. 01 40 2 960 891 - II/15

107

Controls

Safety

Brake force display
The concept

▷ During normal brake application, the top
brake lights light up.
▷ During heavy brake application, the lower
brake lights light up in addition.

108

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving stability control systems

Controls

Driving stability control systems
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

DSC also recognizes unstable vehicle condi‐
tions such as fishtailing or nose-diving. Within
the physical limits DSC helps to keep the vehi‐
cle on a steady course by reducing engine
speed and by applying brakes to the individual
wheels.
A change in the drive type, refer to page 32,
can be made to improve traction.

Note
Adjust your driving style to the situation

Antilock Brake System ABS

An appropriate driving style is always the
responsibility of the driver.

ABS prevents locking of the wheels during
braking.

The laws of physics cannot be repealed, not
even with DSC.

The vehicle contains its steering power even
during full brake applications, thus increasing
active safety.

Therefore, do not reduce the additional safety
margin by driving in a risky manner.◀

ABS is ready when car is ready to drive.

Brake assistant

Do not deactivate DSC when driving with
roof load
Do not deactivate Dynamic Stability Control
DSC when driving with roof load, e.g. roofmounted luggage rack.

When you apply the brakes rapidly, this system
automatically produces the greatest possible
braking force boost. It reduces the braking dis‐
tance to a minimum during emergency stop.
This system utilizes all of the benefits provided
by ABS.

Otherwise, driving safety is not given in driv‐
ing-critical situation due to the elevated center
of gravity.◀

Do not reduce the pressure on the brake pedal
for the duration of the emergency stop.

Button in the vehicle

Overview

DSC Dynamic Stability
Control
The concept
DSC prevents traction loss in the power
wheels when driving off and accelerating.

Online Edition for Part no. 01 40 2 960 891 - II/15

109

Controls

Driving stability control systems

Indicator/warning lights

DSC OFF button

Indicator/warning lights
The indicator lamp flashes: DSC con‐
trols the drive and braking forces.
The indicator lamp lights up: DSC has
failed.

Deactivating DSC: DSC OFF
Automatic switching of the drive type
Depending on the operating state of the
high-voltage system, the drive of the vehicle
automatically switches between front-wheel,
rear-wheel and four-wheel drive.
If DSC is deactivated, this may result in auto‐
matic change of the drive type for unstable
driving situations.
To increase vehicle stability, activate DSC
again as soon as possible.◀
When DSC is deactivated, driving stability is
reduced during acceleration and when driving
in curves.
To increase vehicle stability, activate DSC
again as soon as possible.

Deactivating DSC
Press and hold this button but not lon‐
ger than approx. 10 seconds, until the
indicator lamp for DSC OFF lights up in the in‐
strument cluster and displays DSC OFF.
The DSC system is switched off.
The steering and, depending on the equip‐
ment, suspension are tuned for sporty driving.

Activating DSC

The indicator lamp lights up: DSC is
deactivated.

Automatic activation
When DSC is deactivated, automatic activation
occurs in the following situations:
▷ The high-voltage battery has an insuffi‐
cient charge.
▷ The vehicle has a flat tire.
▷ When activating cruise control in TRAC‐
TION or DSC OFF mode.

DTC Dynamic Traction
Control
The concept
The DTC system is a version of the DSC where
forward momentum is optimized.
The system ensures maximum headway on
special road conditions or loose road surfaces,
e.g., unplowed snowy roads, but with some‐
what limited driving stability.
Activating the Dynamic Traction Control DTC
provides maximum traction. Driving stability is
limited during acceleration and when driving in
curves.
Therefore drive with appropriate caution.
You may find it useful to briefly activate DTC
under the following special circumstances:
▷ When driving in slush or on uncleared,
snow-covered roads.
▷ When freeing vehicle from deep snow or
driving off from loose grounds.

Press button.
DSC OFF and the DSC OFF indicator
lamp go out.

110

When DSC is deactivated, DSC OFF is dis‐
played in the instrument cluster.

▷ When driving with snow chains.

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving stability control systems

Controls

Deactivating/activating DTC Dynamic
Traction Control

Control to select the COMFORT or ECO PRO
programs.

Activating DTC

Overview

Press button.
TRACTION is displayed in the instru‐
ment cluster and the indicator lamp for DSC
OFF lights up.

Button in the vehicle

Deactivating DTC
Press button again.
TRACTION and the DSC OFF indica‐
tor lamp go out.

Performance Control
Performance Control enhances the agility of
the vehicle.

Operating the programs
Driving Dynamics Control

COMFORT

To increase maneuverability, with a corre‐
spondingly sporty driving style, wheels are
braked individually. The resulting braking
power is simultaneously largely compensated
by an engine intervention.

ECO PRO

COMFORT

Due to the variable drive configuration, this in‐
tervention can be done either on the front axle,
the rear axle or on both axles simultaneously.

For balanced tuning.

Driving Dynamics Control

Activating COMFORT

With each starting operation, COMFORT is ac‐
tivated using the Start/Stop button.

Press button repeatedly until COM‐
FORT is displayed in the instrument

The concept
The Driving Dynamics Control helps to finetune the vehicle's settings and features. Vari‐
ous programs can be selected for this purpose.

Note
Pressing the Driving Dynamics Control deacti‐
vates the Sport program, refer to page 72, of
the vehicle. The selector lever automatically
switches out of the Sport program in selector
lever position D. Use the Driving Dynamics

Program

cluster.

ECO PRO
ECO PRO, refer to page 145, provides consis‐
tent tuning to maximize range.
Comfort functions and the engine controller
are adjusted.
The program can be configured to individual
specifications.

Online Edition for Part no. 01 40 2 960 891 - II/15

111

Controls

Driving stability control systems

Activating ECO PRO

Driving off without delay

Press button repeatedly until ECO
PRO is displayed in the instrument
cluster.

Configuring ECO PRO

After releasing the foot brake, start driv‐
ing without delay, since the drive-off assistant
will not hold the vehicle in place for more than
approx. 2 seconds and the vehicle will begin to
roll back.◀

1. Activate ECO PRO.
2. "Configure ECO PRO"
Make the desired settings.

Displays
Selected program
The instrument cluster displays
the selected program.

Display on the Control Display
Program changes can be displayed on the
Control Display.
1. "Settings"
2. "Control display"
3. "Driving mode info"

Drive-off assistant
This system supports driving off on inclines.
The parking brake is not required.
1. Hold the vehicle in place with the foot
brake.
2. Release the foot brake and drive off with‐
out delay.
After the foot brake is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle load, the vehicle may
roll back slightly.

112

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving comfort

Controls

Driving comfort
Vehicle features and options

Overview

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Buttons on the steering wheel
Press button Function
System on/off, interrupt
Store speed
Resume speed

Cruise control

rocker switch: change, hold,
store speed

The concept
The system maintains a preset speed via the
buttons on the steering wheel. The system
brakes on downhill gradients if engine braking
is insufficient.

General information
Depending on the driving settings, the features
of the cruise control can change in certain
areas.

Hints
Unfavorable conditions
Do not use the system if unfavorable
conditions make it impossible to drive at a con‐
stant speed, e.g.:

Controls
Switching on
Press button on the steering wheel.
The indicator lamp in the instrument
cluster lights up.
Desired speed becomes current speed
and will be displayed - beside the sym‐
bol - in the Info Display.
Cruise control can be used.

Switch off
Deactivated or interrupted system

▷ On winding roads.
▷ In heavy traffic.
▷ On slippery roads, in fog, snow or rain, or
on a loose road surface.
Otherwise, you could lose control of the vehi‐
cle and cause an accident.◀

With deactivated or interrupted system
use your brakes, steering and moves as usual
to avoid the chance of an accident.◀
Press button.
▷ If active: press twice.
▷ If interrupted: press once.

Online Edition for Part no. 01 40 2 960 891 - II/15

113

Controls

Driving comfort

The displays go out. The stored desired speed
is deleted.

When cruise control is maintained or stored,
DSC Dynamic Stability Control will be turned
on if needed.

Interrupting
When active, press the button.
The system is automatically interrupted if:
▷ The brakes are applied.
▷ Selector lever position D is disengaged.
▷ DTC Dynamic Traction Control is activated
or DSC is deactivated.
▷ DSC is actively controlling stability.

Maintaining, storing, and changing the
speed
Hints
Adjusting the desired speed
Modify desired speed to road conditions
and be ready to brake at all times; otherwise,
there is the risk of an accident.◀
Maintaining/storing the speed

Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.
▷ Each time the rocker switch is pressed to
the point of resistance, the desired speed
increases or decreases by approx.
1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the point of resistance, the desired
speed increases or decreases by a maxi‐
mum of 5 mph/10 km/h.
The maximum speed that can be set de‐
pends on the vehicle.
▷ Pressing the rocker switch to the resist‐
ance point and holding it accelerates or de‐
celerates the vehicle without requiring
pressure on the accelerator pedal.
After the rocker switch is released, the ve‐
hicle maintains its final speed. Pressing the
switch beyond the resistance point causes
the vehicle to accelerate more rapidly.

Press button.
Or:

Resuming the desired speed
Press button.
The stored speed is reached and maintained.

Displays in the instrument cluster
Press the rocker switch while the system is in‐
terrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.

Indicator lamp
Depending on how the vehicle is equip‐
ped, the indicator lamp in the instru‐
ment cluster indicates whether the sys‐
tem is switched on.

This is displayed in the instrument cluster.

114

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving comfort

Desired speed
The desired speed is displayed next to
the symbol in the info display.
▷ The indicator lights up green: the
system is active.
▷ The indicator lights up orange: the system
has been interrupted.

Controls

▷ By the rear middle sensors at approx.
5 ft/1.50 m.
To ensure full functionality:
▷ Do not cover sensors, e.g., with stickers,
bicycle racks.
▷ Keep the sensors clean and free of ice.

▷ No display: system is switched off.

▷ When using high-pressure washers, do not
spray the sensors for long periods and
maintain a distance of at least 12 in/30 cm.

Brief status display

Hints

Selected desired speed.
If --- appears briefly on the display for Check
Control messages, it is possible that the sys‐
tem requirements are currently not ready for
operations.

Displays in the Head-up Display
Some system information can also be dis‐
played in the Head-up Display.

PDC Park Distance Control
The concept
PDC is a support when parking. When you
slowly approach an object in the rear - or also
in the front of the vehicle if the feature is availa‐
ble - then the object is reported through:
▷ Signal tones.

Personal responsibility
Even an active system does not relieve
the driver from personal responsibility while
driving.
Technically the system has its limits, it cannot
independently react to all traffic situations.
Monitor your driving, be on the alert, observe
the vehicle surroundings and other traffic and
react when needed - risk of accident.◀
Avoid driving fast with PDC
Avoid approaching an object too fast.
Avoid driving off fast while PDC is not yet ac‐
tive.
For technical reasons, the system may other‐
wise be too late in issuing a warning.◀

Overview
With front PDC: button in vehicle

▷ Visual display.

General information
Ultrasound sensors in the bumpers measure
the distances from objects.
The maneuvering range, depending on the ob‐
stacle and environmental conditions, is approx.
6 ft/2 m.
An acoustic warning is first given:
▷ By the front sensors and the two rear cor‐
ner sensors at approx. 24 in/60 cm.

PDC Park Distance Control

Online Edition for Part no. 01 40 2 960 891 - II/15

115

Controls

Driving comfort

Switching on/off

vehicle, a signal tone sounds from the left rear
speaker.

Switching on automatically

The shorter the distance to the object, the
shorter the intervals.

PDC switches on automatically in the following
situations:
▷ If selector lever position R is engaged while
the engine is running or in electric mode.
The rearview camera also switches on.
▷ If equipped with front PDC: when obsta‐
cles are detected behind or in front of the
vehicle by PDC and the speed is slower
than approx. 2.5 mph/4 km/h.
You may turn off automatic activation:
1. "Settings"

If the distance to a detected object in the front
is less than approx. 12 in/30 cm and in the rear
less than approx. 20 in/50 cm, a continuous
tone is sounded.
With front PDC: if objects are located both in
front of and behind the vehicle, an alternating
continuous signal is sounded.
The signal tone is switched off, when selector
lever position P is engaged on vehicles with
Steptronic transmission.

2. "Parking"

Volume

3. Select setting.

The volume of the PDC signal tone can be ad‐
justed similar to the sound and volume set‐
tings of the radio.

Settings are stored for the profile currently
in use.

Automatic deactivation during forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on if needed.

With front PDC: switching on/off
manually
Press button.

Visual warning
The approach of the vehicle to an object can
be shown on the Control Display. Objects that
are farther away are already displayed on the
Control Display before a signal sounds.
A display appears as soon as Park Distance
Control (PDC) is activated.
The range of the sensors is represented in the
colors green, yellow and red.

▷ On: the LED lights up.
▷ Off: the LED goes out.
The rearview camera image is displayed when
the reverse gear is engaged by pressing the
button.

Display

When the image of the rearview camera is dis‐
played, the reel can be made to PDC:
"Rear view camera"

System limits
Limits of ultrasonic measurement

Signal tones
When approaching an object, an intermittent
sound indicates the position of the object. E. g.
if an object is detected to the left rear of the

116

Settings are stored for the profile currently in
use.

Ultrasonic measuring might not function under
the following circumstances:
▷ For small children and animals.

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving comfort

▷ For persons with certain clothing, e.g.
coats.
▷ With external interference of the ultra‐
sound, e.g. from passing vehicles or loud
machines.
▷ When sensors are dirty, iced over, dam‐
aged or out of position.
▷ Under certain weather conditions such as
high relative humidity, rain, snowfall, ex‐
treme heat or strong wind.
▷ With tow bars and trailer couplings of other
vehicles.
▷ With thin or wedge-shaped objects.
▷ With moving objects.
▷ With elevated, protruding objects such as
ledges or cargo.
▷ With objects with corners and sharp edges.
▷ With objects with a fine surface structure
such as fences.

▷ Due to other ultrasound sources, e.g.,
sweeping machines, high pressure steam
cleaners or neon lights.

Malfunction
A Check Control message is displayed.
Red symbol is displayed, and the range
of the sensors is dimmed on the Con‐
trol Display.
PDC has failed. Have the system checked.
To ensure full functionality:
▷ Keep the sensors clean and free of ice.
▷ dimmedDo not put any stickers on sen‐
sors.
▷ When using high-pressure washers, do not
spray the sensors for long periods and
maintain a distance of at least 12 in/30 cm.

▷ For objects with porous surfaces.

Surround View

Low objects already displayed, e.g., curbs, can
move into the blind area of the sensors before
or after a continuous tone sounds.

The concept

False warnings

Controls

Surround View comprises various camera as‐
sistance systems that help the driver when
parking, maneuvering, and at complex exits
and intersections.

PDC may issue a warning under the following
conditions even though there is no obstacle
within the detection range:

▷ Rearview camera, refer to page 117

▷ In heavy rain.

▷ Side View, refer to page 122.

▷ When sensors are very dirty or covered
with ice.
▷ When sensors are covered in snow.
▷ On rough road surfaces.
▷ On uneven surfaces, such as speed
bumps.
▷ In large buildings with right angles and
smooth walls, e.g., in underground ga‐
rages.

▷ Top View, refer to page 120.

Rearview camera
The concept
The rearview camera provides assistance in
parking and maneuvering backwards. The area
behind the vehicle is shown on the Control
Display.

▷ In automatic car washes.
▷ Through heavy pollution.

Online Edition for Part no. 01 40 2 960 891 - II/15

117

Controls

Driving comfort

Hints
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an acci‐
dent could result from road users or objects
that are not lidtured by the camera.◀

At a glance

Automatic deactivation during forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on if needed.

Switching on/off manually
Press button.

Button in the vehicle

▷ On: the LED lights up.
▷ Off: the LED goes out.
The PDC is shown on the Control Display.
The rearview camera image is displayed when
the reverse gear is engaged by pressing the
button.

Switching the view via iDrive
With PDC activated or Top View switched on:
"Rear view camera"

Rearview camera

The rearview camera image is displayed.

Display on the Control Display

Camera

Functional requirement
▷ The rearview camera is switched on.
▷ The trunk lid is fully closed.

Activating assistance functions
More than one assistance function can be ac‐
tive at the same time.
The camera lens is located between the li‐
cense plate lights. The image quality may be
impaired by dirt.
Clean the camera lens, refer to page 190.

▷ Parking aid lines
"Parking aid lines"
Lanes and turning radius are indicated.
▷ Obstacle marking
"Obstacle marking"
Spatially-shaped markings are displayed.

Switching on/off
Switching on automatically
Engage selector lever position R with the en‐
gine running or drive readiness switched on.

118

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving comfort

Controls

Pathway lines

Obstacle marking

▷ Pathway lines can be superimposed on the
image of the rearview camera.

Obstacles behind the vehicle are detected by
the PDC sensors and, when respectively
equipped, detected by the rearview camera.

▷ They help you to estimate how much
space is needed when parking and maneu‐
vering on level pavement.

Obstacle markings can be faded into the image
of the rearview camera.

▷ They are dependent on the current steer‐
ing angle and are continuously adjusted to
the steering wheel movements.

Their colored margins match the markings of
the PDC. This simplifies estimation of the dis‐
tance to the object shown.

Turning circle lines

Parking using pathway and turning
radius lines
1. Position the vehicle so that the turning ra‐
dius lines lead to within the limits of the
parking space.

▷ Turning circle lines can only be superim‐
posed on the rearview camera image to‐
gether with pathway lines.
▷ They show the course of the smallest pos‐
sible turning radius on a level road.
▷ Only one turning radius line is displayed af‐
ter the steering wheel is turned past a cer‐
tain angle.

Online Edition for Part no. 01 40 2 960 891 - II/15

119

Controls

Driving comfort

2. Turn the steering wheel to the point where
the pathway line covers the corresponding
turning radius line.

Top View
The concept
Top View provides assistance in parking and
maneuvering. The area around the vehicle is
shown on the Control Display.

General information
The image is lidtured by two cameras
integrated in the exterior mirrors, by the rear‐
view camera and a camera on the front of the
vehicle.

Display settings

The range is no more than approx. 6.5 ft/2 m to
the side, front and rear.

Brightness

Obstacles within this range are thus displayed
early on the Control Display.

With the rearview camera switched on:
1.

Hints

Select the symbol.

2. Turn the controller until the desired setting
is reached, and press the controller.

Contrast
With the rearview camera switched on:
1.

Select the symbol.

2. Turn the controller until the desired setting
is reached, and press the controller.

Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an acci‐
dent could result from road users or objects
that are not lidtured by the camera.◀

Overview
Button in the vehicle

System limits
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Assistance functions also take into account
data of the PDC.
Follow instructions in the PDC chapter, refer to
page 115.

Top View

The objects displayed on the Control Display
under certain circumstances are closer than
they appear. Do not estimate the distance from
the objects on the display.

120

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving comfort

Cameras

Controls

The rearview camera image is displayed. To
switch to the Top View:
"Rear view camera"

Automatic deactivation during forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on if needed.

Switching on/off manually

Front camera

Press button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
Top View is displayed.
The rearview camera image is displayed when
the reverse gear is engaged by pressing the
button.
The lenses of the Top View cameras are lo‐
cated at the bottom of the exterior mirror hous‐
ings. The image quality may be impaired by
dirt.

Display
Display on the Control Display

Clean the camera lenses, refer to page 190.

The area surrounding the vehicle can be dis‐
played on the Control Display.

Functional requirements

The display appears as soon as Top View is
activated.

Top View can be used only to a limited extent
in the following situations:

When the image of the rearview camera is dis‐
played, it is possible to reel to top view:

▷ With a door open.

"Rear view camera"

▷ With the trunk lid open.
▷ With an exterior mirror folded in.
▷ In poor light.
The unavailable camera range is depicted by
shading.

Switching on/off
Switching on automatically
With the engine running, engage lever in posi‐
tion P R.

Brightness
With Top View switched on:
1.

Select the symbol.

2. Turn the controller until the desired setting
is reached, and press the controller.

Contrast
With Top View switched on:
1.

Select the symbol.

Online Edition for Part no. 01 40 2 960 891 - II/15

121

Controls

Driving comfort

2. Turn the controller until the desired setting
is reached, and press the controller.

Which camera is active is shown on the top
edge of the screen.

Displaying the turning radius and
pathway lines

Hints

▷ The static, red turning radius line shows
the space needed to the side of the vehicle
when the steering wheel is turned all the
way.
▷ The variable, green pathway line assists
you in assessing the amount of space ac‐
tually needed to the side of the vehicle.
The lane line depends on the engaged
gear and the current steering angle. The
track line is continuously adjusted for the
steering wheel movement.
"Parking aid lines"
Turning circle and pathway lines are displayed.

The images of the cameras are displayed, de‐
pending on the gear selected, on the Control
Display.
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle on blind driveways and intersections with
your own eyes. Otherwise, an accident could
result from road users or objects located out‐
side the picture areas of the Side View cam‐
eras.◀

At a glance
Button in the vehicle

System limits
A Check Control message is displayed when a
camera is defective.

Side View
The concept
Side View

Cameras

Side View provides an early look at cross traffic
at blind driveways and intersections. Road
users concealed by obstacles to the left and
right of the vehicle can only be detected rela‐
tively late from the driver's seat. To improve
the viewing, each camera, front and rear on the
vehicle, detects the traffic area on the side.

122

Front camera

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving comfort

Controls

Contrast
With the Side View switched on:
1.

Select the symbol.

2. Turn the controller until the desired setting
is reached, and press the controller.

Warning of crossing traffic
Rear camera

The concept

Two cameras are used for the detection.

When an object approaching from the side is
detected by the front or rear camera, this is de‐
picted by a symbol in the Side View display.

The image quality may be impaired by dirt.
Clean the camera lenses, refer to page 190.

Requirements
Switching on/off

▷ Side View switched on.

Switching on/off manually

▷ Your vehicle moves no faster than walking
speed.

Press button.

▷ To detect approaching objects, sufficient
brightness, e.g., daylight is necessary.

Depending on the transmission position, the
picture of the front or rear camera is displayed.

Switching off automatically
By switching into a different function or when
changing gears.
Front Side View: when a certain driving dis‐
tance or speed is exceeded.

Display
The yellow symbol is displayed if an
approaching vehicle is detected by the
camera.
A gray symbol is displayed if crossing
traffic cannot be detected.

Display

System limits

General information

In the following situations, the warning about
crossing traffic may be limited:

The traffic area in front of or behind the vehicle
is displayed on the Control Display.

Brightness
With the Side View switched on:
1.

Select the symbol.

2. Turn the controller until the desired setting
is reached, and press the controller.

▷ In poor lighting or visibility conditions.
▷ If the camera is soiled or covered.

System limits
The objects displayed on the Control Display
under certain circumstances are closer than
they appear. Therefore, do not estimate the
distance from the objects on the display.
The viewing angle is approx. 180°.

Online Edition for Part no. 01 40 2 960 891 - II/15

123

Controls

Climate control

Climate control
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to

the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Automatic climate control

1

Seat heating, left  52

2

Temperature, left

11 Air flow, AUTO intensity

3

SYNC program

12 Manual air distribution

4

Display

5

Maximum cooling

13 Defrosts windows and removes condensa‐
tion

6

Temperature, right

7

Seat heating, right  52

8

Cooling function

9

Automatic recirculated-air control/recircu‐
lated-air mode

124

10 AUTO program

14 Interior temperature sensor — always keep
clear
15 Rear window defroster

Online Edition for Part no. 01 40 2 960 891 - II/15

Climate control

Hints

Controls

Maximum cooling

Sufficient ventilation
When remaining in the vehicle for an ex‐
tended period of time, ensure sufficient exter‐
nal ventilation. Do not continuously use recir‐
culated-air mode; otherwise the air quality in
the interior continuously deteriorates and win‐
dow condensation increases.◀

Climate control functions in detail
Temperature
Turn the ring to set the desired
temperature.

The selected temperature is shown on the dis‐
play of the automatic climate control.
The automatic climate control reaches this
temperature as quickly as possible, if needed
by increasing the cooling or heating output,
and then keeps it constant.
Do not rapidly switch between different tem‐
perature settings. Otherwise, the automatic cli‐
mate control will not have sufficient time to ad‐
just the set temperature.
To reduce the energy consumption, the cool‐
ing or heating output is reduced in ECO-PRO
mode, refer to page 145. ECO PRO is shown
on the display of the automatic climate control.

SYNC program
Press button.
The current setting of the temperature
on the driver's side is transferred to the front
passenger side.
The program is switched off if the setting on
the front passenger side is changed.

Press button.
The system is set to the lowest tem‐
perature, optimum air flow and air circulation
mode.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
The function is available above an external
temperature of approx. 32 ℉/0 ℃ and with the
engine running or when electrical drive readi‐
ness is indicated is indicated.
Adjust air flow with the program active.

Cooling function
The car's interior can be cooled with the sta‐
tionary climate control or via the A/C button
with the engine running and/or with drive readi‐
ness activated.
Press button.
The air will be cooled and dehumidi‐
fied and, depending on the temperature set‐
ting, warmed again.
Depending on the weather, the windshield and
side windows may fog up briefly when the en‐
gine is started or drive readiness is activated.
The cooling function is switched on automati‐
cally with the AUTO program.
When using the automatic climate control,
condensation water, refer to page 141, devel‐
ops that exits underneath the vehicle.

Automatic recirculated-air control/
recirculated-air mode
You may respond to unpleasant odors or pollu‐
tants in the immediate environment by tempo‐
rarily suspending the supply of outside air. The
system then recirculates the air currently
within the vehicle.
Press button repeatedly to select an
operating mode:

Online Edition for Part no. 01 40 2 960 891 - II/15

125

Controls

Climate control

▷ LEDs off: outside air flows in continuously.
▷ Left LED on, automatic recirculated-air
control: a sensor detects pollutants in the
outside air and shuts off automatically.
▷ Right LED on, recirculated-air mode: the
supply of outside air into the vehicle is per‐
manently blocked.
Recirculated air mode switches off automati‐
cally at low external temperatures after a cer‐
tain amount of time in order to avoid window
fogging.
To prevent window fogging, recirculated air
mode switches off automatically after a certain
amount of time, depending on the environ‐
mental conditions.
If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO
button to utilize the condensation sensor.
Make sure that air can flow to the windshield.
Sufficient ventilation
When remaining in the vehicle for an ex‐
tended period of time, ensure sufficient exter‐
nal ventilation. Do not continuously use recir‐
culated-air mode; otherwise the air quality in
the interior continuously deteriorates and win‐
dow condensation increases.◀

AUTO program

Intensity of the AUTO program
With the AUTO program activated, the auto‐
matic intensity control can be changed.
Press the left or right side of the but‐
ton: decrease or increase the inten‐
sity.
The selected intensity is shown on the display
of the automatic climate control.

Air flow, manual
To manually adjust air flow turn off AUTO pro‐
gram first.
Press the left or right side of the but‐
ton: decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
The air flow of the automatic climate control
may be reduced automatically to save battery
power.

Manual air distribution
Press button repeatedly to select a
program:
▷ Windows.

Press button.
Air flow, air distribution and tempera‐
ture are controlled automatically.
Depending on the selected temperature,
AUTO intensity program and outside influen‐
ces, the air is directed to the windshield, side
windows, upper body, and into the footwell.
The cooling function, refer to page 125, is
switched on automatically with the AUTO pro‐
gram.
At the same time, a condensation sensor con‐
trols the program so as to prevent window
condensation as much as possible.

126

To switch off the program: press the button
again or manually adjust the air distribution.

▷ Upper body region.
▷ Footwell.
▷ Windows and upper body region.
▷ Windows and footwell.
▷ Upper body region and footwell.
▷ Windows, upper body region, and footwell.
The selected air distribution is shown on the
display of the automatic climate control.
If the windows are fogged over, press the
AUTO button to utilize the condensation sen‐
sor.

Online Edition for Part no. 01 40 2 960 891 - II/15

Climate control

Defrosts windows and removes
condensation

Controls

Ventilation

Press button.
Ice and condensation are quickly re‐
moved from the windshield and the front side
windows.
For this purpose, point the side vents onto the
side windows as needed.
Adjust air flow with the program active.
If the windows are fogged over, you can also
switch on the cooling function or press the
AUTO button to utilize the condensation sen‐
sor.

Rear window defroster
Press button.
The rear window defroster switches
off automatically after a certain period of time.

Switching the system on/off

▷ Thumbwheel for continuous opening and
closing of the vent, arrow 1.
▷ Lever for changing the air flow direction,
arrow 2.

Adjusting the ventilation
▷ Ventilation for cooling:
Direct vent in your direction when vehicle's
interior is too hot.
▷ Draft-free ventilation:
Adjust the vent to let the air flow past you.

Switch off
Press and hold the left button until the
control switches off.

Stationary climate control
The concept

Switching on
Press any button except
▷ Rear window defroster.

Stationary climate control cools or heats the
interior prior to departure to a comfortable
temperature.

▷ Seat heating.

The interior temperature is lowered with high
cooling output.

Microfilter/activated-charcoal filter

The system may heat the interior. Snow and
ice can be removed more easily.

In external and recirculated air mode the mi‐
crofilter/activated charcoal filter filters dust,
pollen, and gaseous pollutants out of the air.
This filter should be replaced during scheduled
maintenance, refer to page 178, of your vehi‐
cle.

The air automatically exits through the vents to
the windshield, the side windows, the upper
body region and into the footwell.
The stationary climate control can be switched
on and off via the following systems:
▷ Direct operation, refer to page 128.
▷ Preselected departure times, refer to
page 128.

Online Edition for Part no. 01 40 2 960 891 - II/15

127

Controls

Climate control

With the BMW i Remote App, refer to
page 128, the standing air conditioning can be
switched on.

4. "Precondition for departure time"

The system switches off automatically after a
certain period of time.

The symbol on the automatic climate con‐
trol lights up when the departure time is acti‐
vated.

If stationary climate control is used during the
charging process, less air conditioning ca‐
pacity will be required while driving. This opti‐
mizes the range.

Functional requirements
▷ When the departure time is preselected:
depends on internal, external and set tem‐
perature.
▷ Direct operation via iDrive: any external
temperature.
▷ Charging cable connected or high-voltage
battery sufficiently charged.
▷ Motor switched off and/or drive readiness
deactivated.

5. Set and activate Desired departure time,
refer to page 156.

The symbol on the automatic climate con‐
trol flashes when the stationary climate control
has been switched on.
If drive readiness is switched off, changes can
be made on the Control Display. Departure
time can only be changed once. Scheduled de‐
parture times are not adjusted. Settings for cli‐
mate control and charging operation are also
applied for scheduled departure times.

Activating with BMW i Remote App
Using the BMW i Remote App, the system can
be directly switched on or via a preset depar‐
ture time.

▷ The vents are open to allow air to flow out.

Switching on/off directly
On the Control Display:
1. "Settings"
2. "Climate"
3. "Activate comfort climate control"
The symbol on the automatic climate con‐
trol flashes if the stationary climate control is
switched on.

Activate climate control at departure
time
The reel-on time is automatically determined
based on the temperature. The system
promptly switches on before the selected de‐
parture time.
On the Control Display:
1. "Settings"
2. "Departure time"
3. "Departure 1:"

128

Online Edition for Part no. 01 40 2 960 891 - II/15

Interior equipment

Controls

Interior equipment
Vehicle features and options

Compatibility

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

If this symbol is printed on the packag‐
ing or in the instructions of the system
to be controlled, the system is gener‐
ally compatible with the universal garage door
opener.

Universal Integrated Remote
Control

If you have any questions, please contact:
▷ Your service center.
▷ www.homelink.com on the Internet.
HomeLink is a registered trademark of Gentex
Corporation.

Control elements on the interior
rearview mirror

The concept
The universal garage door opener can operate
up to 3 functions of remote-controlled sys‐
tems such as garage door drives or lighting
systems. The universal garage door opener re‐
places up to 3 different hand-held transmitters.
To operate the remote control, the buttons on
the interior rearview mirror must be program‐
med with the desired functions. The hand-held
transmitter for the particular system is required
in order to program the remote control.
During programming
During programming and before activat‐
ing a device using the universal garage door
opener, ensure that there are no people, ani‐
mals or objects in the area of the remote-con‐
trolled device; otherwise, there is a risk of in‐
jury or damage.
Also follow the safety instructions of the handheld transmitter.◀
Before selling the vehicle, delete the stored
functions for the sake of security.

▷ LED, arrow 1.
▷ Buttons, arrow 2.
▷ The hand-held transmitter, arrow 3, is re‐
quired for programming.

Programming
General information
1. Switch on the ignition.
2. Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the LED
on the interior rearview mirror flashes. This

Online Edition for Part no. 01 40 2 960 891 - II/15

129

Controls

Interior equipment

erases all programming of the buttons on
the interior rearview mirror.
3. Hold the hand-held transmitter for the sys‐
tem to be controlled approx. 1 to 3 in/2.5 to
8 cm away from the buttons of the interior
rearview mirror. The required distance de‐
pends on the manual transmitter.
4. Simultaneously press and hold the button
of the desired function on the hand-held
transmitter and the button to be program‐
med on the interior rearview mirror. The
LED on the interior rearview mirror will be‐
gin flashing slowly.
5. Release both buttons as soon as the LED
flashes more rapidly. The LED flashing
faster indicates that the button on the inte‐
rior rearview mirror has been programmed.
If the LED does not flash faster after at
least 60 seconds, change the distance be‐
tween the interior rearview mirror and the
hand-held transmitter and repeat the step.
Several more attempts at different distan‐
ces may be necessary. Wait at least
15 seconds between attempts.
Canada: if programming with the handheld transmitter was interrupted, hold
down the interior rearview mirror button
and repeatedly press and release the
hand-held transmitter button for 2 sec‐
onds.
6. To program other functions on other but‐
tons, repeat steps 3 to 5.
The systems can be controlled using the inte‐
rior rearview mirror buttons.

Special feature of the alternatingcode wireless system
If you are unable to operate the system after
repeated programming, please check if the
system to be controlled features an alternat‐
ing-code system.

rearview mirror starts flashing rapidly and then
stays lit constantly for 2 seconds, the system
features an alternating-code system. Flashing
and continuous illumination of the LED will re‐
peat for approximately 20 seconds.
For systems with an alternating-code system,
the universal garage door opener and the sys‐
tem also have to be synchronized.
Please read the operating manual to find out
how to synchronize the system.
Synchronizing is easier with the aid of a sec‐
ond person.
To synchronize:
1. Park the vehicle within range of the re‐
mote-controlled system.
2. Program the relevant button on the interior
rearview mirror as described.
3. Locate and press the synchronizing button
on the system being programmed. You
have approx. 30 seconds for the next step.
4. Hold down the programmed button on the
interior rearview mirror for approximately
3 seconds and then release it. If necessary,
repeat this step up to three times in order
to finish synchronization. Once synchroni‐
zation is complete, the programmed func‐
tion will be carried out.

Reprogramming individual buttons
1. Switch on the ignition.
2. Press and hold the interior rearview mirror
button to be programmed.
3. As soon as the interior rearview mirror LED
starts flashing slowly, hold the hand-held
transmitter for the system to be controlled
approx. 1 to 3 in/2.5 to 8 cm away from the
buttons of the interior rearview mirror. The
required distance depends on the manual
transmitter.

Read the system's operating manual, or press
the programmed button on the interior rear‐
view mirror longer. If the LED on the interior
130

Online Edition for Part no. 01 40 2 960 891 - II/15

Interior equipment

4. Likewise, press and hold the button of the
desired function on the hand-held trans‐
mitter.
5. Release both buttons as soon as the inte‐
rior rearview mirror LED flashes more rap‐
idly. The LED flashing faster indicates that
the button on the interior rearview mirror
has been programmed. The system can
then be controlled by the button on the in‐
terior rearview mirror.
If the LED does not flash faster after at
least 60 seconds, change the distance and
repeat the step. Several more attempts at
different distances may be necessary. Wait
at least 15 seconds between attempts.
Canada: if programming with the handheld transmitter was interrupted, hold
down the interior rearview mirror button
and repeatedly press and release the
hand-held transmitter button for 2 sec‐
onds.

Controls
Before operation
Before operating a system using the uni‐
versal garage door opener, ensure that there
are no people, animals, or objects within the
range of movement of the remote-controlled
system; otherwise, there is a risk of injury or
damage.
Also follow the safety instructions of the handheld transmitter.◀
The system, such as the garage door, can be
operated using the button on the interior rear‐
view mirror while the engine is running or when
the ignition is started. To do this, hold down
the button within receiving range of the system
until the function is activated. The interior rear‐
view mirror LED stays lit while the wireless sig‐
nal is being transmitted.

Controls

proximately 20 seconds until the LED flashes
rapidly. All stored functions are deleted. The
functions cannot be deleted individually.

Sun visor
Glare shield
Fold the sun visor down or up.

Vanity mirror
A vanity mirror is located in the sun visor be‐
hind a cover. When the cover is opened, the
mirror lighting switches on.

Connecting electrical
devices
Hints
Do not connect charging devices to the
12 volt socket in the vehicle
Do not connect battery chargers to the fac‐
tory-installed 12 volt sockets in the vehicle as
this may damage the vehicle battery due to an
increased power consumption.◀
Replace the cover after use
Reinsert the lighter or socket cover after
use, otherwise objects may get into the lighter
socket or fixture and cause a short circuit.◀

Sockets
General information
The lighter socket can be used as a socket for
electrical equipment while the engine is run‐
ning or when the ignition is switched on.

Note

Deleting stored functions

The total load of all sockets must not exceed
140 watts at 12 volts.

Press and hold the left and right button on the
interior rearview mirror simultaneously for ap‐

Do not damage the socket by using unsuitable
connectors.

Online Edition for Part no. 01 40 2 960 891 - II/15

131

Controls

Interior equipment

Center console

▷ Do not connect devices such as fans or
lights to the USB interface.
▷ Do not connect USB hard drives.
▷ Do not use the USB interface for recharg‐
ing external devices.

At a glance

The socket is located between the front seats.
Remove the cover.

In the front passenger footwell
The socket is located between the front seats.

Cargo area
Cargo cover
The socket is located below the glove com‐
partment.

USB interface for data
transfer
The concept
Connection for importing and exporting data
on USB devices, e.g.:
▷ Personal Profile settings, refer to page 39.

General information
The cargo cover is located under the tailgate.
The cover can be folded forward or removed to
load bulky luggage.

Note
Do not deposit any objects on the cargo
cover
Do not deposit any objects on the cargo cover.
Otherwise, this could damage the cargo cover
or the cargo partition.◀

▷ Music collection.
▷ Importing Trips.

Hints
Observe the following when connecting:
▷ Do not use force when plugging the con‐
nector into the USB interface.

132

Online Edition for Part no. 01 40 2 960 891 - II/15

Interior equipment

Controls

Removing

Raise the cover, arrow 1, and pull it back to re‐
move, arrow 2.

Installing
Place the cover in the brackets and fold it
down.

Online Edition for Part no. 01 40 2 960 891 - II/15

133

Controls

Storage compartments

Storage compartments
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Glove compartment
Front passenger side
Note
Close the glove compartment again im‐
mediately
Close the glove compartment immediately af‐
ter use while driving; otherwise, injury may oc‐
cur during accidents.◀

Opening

Hints
No loose objects in the car's interior
Do not stow any objects in the car's inte‐
rior without securing them; otherwise, they
may present a danger to occupants e.g., during
braking and evasive maneuvers.◀
Do not place anti-slip mats on the dash‐
board
Do not place anti-slip mats on the dashboard.
The mat materials could damage the dash‐
board.◀

Pull the handle.

Closing
Fold cover closed.

Storage compartments
The following storage compartments are avail‐
able in the vehicle interior:

Between the front seats

▷ Glove compartment on the front passenger
side, refer to page 134.

Center armrest

▷ Between the front seats, refer to
page 134.
▷ Rear seat, refer to page 135.

134

Open
A storage compartment is located in the center
armrest between the seats.

Online Edition for Part no. 01 40 2 960 891 - II/15

Storage compartments

Controls

Connection for an external audio
device
An external audio device, e.g.,
an MP3 player, can be con‐
nected via the AUX-IN port or
the USB audio interface in the
center armrest.
To open, pull upward, arrow.

Rear seat

Front cup holder

Rear cup holder

Hints

Hints

Shatter-proof containers and no hot
drinks

Shatter-proof containers and no hot
drinks

Use light and shatter-proof containers and do
not transport hot drinks. Otherwise, there is
the increased danger of injury in an accident.◀

Use light and shatter-proof containers and do
not transport hot drinks. Otherwise, there is
the increased danger of injury in an accident.◀

Unsuitable containers

Unsuitable containers

Do not forcefully push unsuitable con‐
tainers into the cupholders. This may result in
damage.◀

Do not forcefully push unsuitable con‐
tainers into the cupholders. This may result in
damage.◀

Overview

Overview

Between the seats.

In the rear of the center console.

Online Edition for Part no. 01 40 2 960 891 - II/15

135

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving tips
This chapter provides you with information
useful in dealing with specific driving and
operating modes.

Online Edition for Part no. 01 40 2 960 891 - II/15

Driving tips

Things to remember when driving

Things to remember when driving
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Breaking-in period
General information
Moving parts need time to adjust to one an‐
other (break-in time).
The following instructions will help accomplish
a long vehicle life and good efficiency.
During break-in, do not use the Launch Con‐
trol, refer to page 73.

Engine, transmission, and axle drive
Up to 1,200 miles/2,000 km
Do not exceed the maximum engine and road
speed:
▷ For gasoline engine 4,500 rpm and
100 mph/160 km/h.
Avoid full load or kickdown under all circum‐
stances.

From 1,200 miles/2,000 km
The engine and vehicle speed can gradually be
increased.

they achieve their full traction potential after a
break-in time.
Drive conservatively for the first
200 miles/300 km.

Brake system
Brakes require an initial break-in period of ap‐
prox. 300 miles/500 km to achieve optimal per‐
formance between brake discs and brake
pads. Drive moderately during this break-in pe‐
riod.

Following part replacement
The same break-in procedures should be ob‐
served if any of the components above-men‐
tioned have to be renewed in the course of the
vehicle's operating life.

Using eDRIVE efficiently
The concept
eDRIVE operates automatically. Proactive driv‐
ing utilizes energy consumption and energy re‐
covery optimally. Energy recovery is used to
charge the high-voltage battery. It is important
for the supply of electrical components and
thus a prerequisite for an extensive range. En‐
ergy consumption and recovery depend very
much, among other things, on your driving
style.

Optimizing driving style
Performance display
The driving style can be optimized using the
performance display in ECO PRO mode.

Tires
Tire traction is not optimal due to manufactur‐
ing circumstances when tires are brand-new;

138

Online Edition for Part no. 01 40 2 960 891 - II/15

Things to remember when driving

Driving tips

for short distances, low to medium speeds and
in stop-and-go traffic.

SAVE battery
SAVE Battery, refer to page 64, conserves the
electric range for a later point in time. In this
case, the vehicle is driven primarily by the
combustion engine.
The driving style is efficient as long as the ac‐
celerator pedal pointer is within the lower
range highlighted in blue during acceleration
and deceleration.
The energy recovery occurs during coasting
and braking and is displayed in the perform‐
ance display by the accelerator pedal indicator.
The accelerator pedal pointer is within the
CHARGE range.
Efficient energy recovery:
▷ The accelerator pedal moves to the left
within the blue range of the CHARGE dis‐
play, arrow 1.
▷ The energy use while driving can be opti‐
mized by efficient acceleration.
Efficient acceleration:
▷ The accelerator pedal moves to the right
within the blue range of the eDRIVE dis‐
play, arrow 2.
▷ Use deceleration during coasting as often
as possible for energy recovery.
Brake according to traffic and circum‐
stances
Brake in accordance with the traffic conditions,
or there is the risk of accident.◀

ECO PRO
ECO PRO, refer to page 145, supports a driv‐
ing style that saves on fuel consumption. For
this purpose, the engine control and comfort
features, e. g. the climate control output, are
adjusted.

Discharge of the high-voltage battery
Longer idle periods, refer to page 190, can re‐
duce the charging state of the high-voltage
battery.
Do not allow the vehicle to sit idle for ex‐
tended periods with a low charging state
Before storing the vehicle for an extended pe‐
riod, check the battery charge indicator to en‐
sure that the high-voltage battery is fully
charged. During the idle period, connect the
vehicle to a charging station at a suitable
charging location. If necessary, the high-volt‐
age battery will be charged automatically.
Make sure that the charging process takes
place. Regularly check the charging state.
Don't allow battery charge status to drop too
low - it will damage the battery.◀

General driving notes

Using drive modes and assistance
systems

Closing the tailgate

Max eDRIVE

Only drive with the tailgate closed; other‐
wise, in the event of an accident or braking and
evasive maneuvers, passengers and other traf‐

Max eDRIVE, refer to page 64, forces electric
driving. Electric driving is especially efficient

Drive with the tailgate closed

Online Edition for Part no. 01 40 2 960 891 - II/15

139

Driving tips

Things to remember when driving

fic may be injured, and the vehicle may be
damaged.◀
If driving with the tailgate open cannot be
avoided:
▷ Drive moderately.

This phenomenon is referred to as hydroplan‐
ing. It is characterized by a partial or complete
loss of contact between the tires and the road
surface, ultimately undermining your ability to
steer and brake the vehicle.

Driving through water

Hot exhaust system

Observe water level and speed

Hot exhaust system
High temperatures are generated in the
exhaust system.
Do not remove the heat shields installed and
never apply undercoating to them. Make sure
that flammable materials, e. g. hay, leaves,
grass, etc. do not come in contact with the hot
exhaust system while driving, while in idle po‐
sition mode, or when parked. Such contact
could lead to a fire, resulting in an increased
risk of serious personal injury as well as prop‐
erty damage.
Do not touch hot exhaust pipes; otherwise,
there is a danger of getting burned.◀

Mobile communication devices in the
vehicle
Mobile communication devices in the ve‐
hicle
It is not recommended to use mobile phones,
such as mobile phones, in the vehicle interior
without a direct connection to an external aer‐
ial. Otherwise, the vehicle's electronics and
mobile communication devices can interfere
with each other. In addition, there is no assur‐
ance that the radiation generated during trans‐
mission will be conducted away from the vehi‐
cle interior.◀

Do not exceed the maximum water level
and maximum speed; otherwise, the vehicle's
engine, the electrical systems and the trans‐
mission may be damaged.◀
Drive though calm water only and only if it is
not deeper than 9.8 inches/25 cm and at this
height, no faster than walking speed, up to
3 mph/5 km/h.

Braking safely
Your vehicle is equipped with ABS as a stand‐
ard feature.
Applying the brakes fully is the most effective
way of braking in situations needed.
Steering is still responsive. You can still avoid
any obstacles with a minimum of steering ef‐
fort.
Pulsation of the brake pedal and sounds from
the hydraulic circuits indicate that ABS is in its
active mode.
In certain braking situations, the perforated
brake discs can cause functional problems.
However, this has no effect on the perform‐
ance and operational reliability of the brake.

Objects within the range of movement
of the pedals
No objects in the area around the pedals

Hydroplaning
Hydroplaning
When driving on wet or slushy roads, re‐
duce your speed to prevent hydroplaning.◀
On wet or slushy roads, a wedge of water can
form between the tires and road surface.
140

Keep floor mats, carpets, and any other
objects out of the pedal area; otherwise, the
function of the pedals could be impeded while
driving and create the risk of an accident.
Do not place additional floor mats over existing
mats or other objects.

Online Edition for Part no. 01 40 2 960 891 - II/15

Things to remember when driving

Only use floor mats that have been approved
for the vehicle and can be properly attached to
floor.
Ensure that the floor mats are securely fas‐
tened again after they were removed for clean‐
ing, e.g.◀

Driving in wet conditions
When roads are wet, salted, or in heavy rain,
press brake pedal ever so gently every few
miles.
Ensure that this action does not endanger
other traffic.
The heat generated in this process helps dry
the brake discs and pads.

Driving tips

Brake disc corrosion
Brake disc corrosion and contamination of the
brake pads are favored by:
▷ Low mileage.
▷ Extended periods when the vehicle is not
used at all.
▷ Infrequent use of the brakes.
Corrosion will built up when the maximum
pressure applied to the brake pads during
braking is not reached - thus discs don't get
cleaned.
Corrosion buildup on the brake discs will cause
a pulsating effect on the brakes in their re‐
sponse - generally that cannot be corrected.

In this way braking efficiency will be available
when you need it.

Condensation under the parked
vehicle

Hills

When using the automatic climate control,
condensation water develops collecting under‐
neath the vehicle.

Avoid stressing the brakes
Avoid placing excessive stress on the
brake system. Light but consistent brake pres‐
sure can lead to high temperatures, brakes
wearing out and possibly even brake failure.◀

These traces of water under the vehicle are
normal.

Do not drive in neutral
Do not drive in neutral, in the ECO PRO
driving program, or with drive readiness
switched off, as doing so disables engine brak‐
ing. In addition, steering and brake assist are
unavailable with the engine stopped.◀
Drive long or steep downhill gradients in the
gear that requires least braking efforts. Other‐
wise the brakes may overheat and reduce
brake efficiency.
You can increase the engine's braking effect
by shifting down, going all the way to first gear,
if needed.
On downhill sections, use energy recovery if
possible to decelerate the vehicle.

Online Edition for Part no. 01 40 2 960 891 - II/15

141

Driving tips

Loading

Loading
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Hints
Overloading the vehicle
To avoid exceeding the approved ca‐
pacity of the tires, never overload the vehicle.
Overloading can lead to overheating and in‐
creases the rate at which damage develops in‐
side the tires. This could result in a sudden
loss of tire inflation pressure.◀
No fluids in the cargo area
Make sure that fluids do not leak into the
cargo area; otherwise, the vehicle may be dam‐
aged.◀
Heavy and hard objects
Do not stow any heavy and hard objects
in the car's interior without securing them; oth‐
erwise, they may present a danger to occu‐
pants, e.g., during braking and evasive maneu‐
vers.◀

vehicle and unstable driving situations
may result.

2. Determine the combined weight of the
driver and passengers that will be riding in
your vehicle.
3. Subtract the combined weight of the driver
and passengers from XXX kilograms or
YYY pounds.
4. The resulting figure equals the available
amount of cargo and luggage load ca‐
pacity.
For example, if the YYY amount equals
1,000 lbs and there will be four 150 lbs
passengers in your vehicle, the amount of
available cargo and luggage load capacity
is 400 lbs: 1,000 lbs minus 600 lbs =
400 lbs.
5. Determine the combined weight of lug‐
gage and cargo being loaded on the vehi‐
cle. That weight may not safely exceed the
available cargo and luggage load capacity
calculated in Step 4.

Determining the load limit
1. Locate the following statement on your ve‐
hicle’s placard:
▷ The combined weight of occupants
and cargo should never exceed XXX kg
or YYY lbs. Otherwise, damage to the
142

Online Edition for Part no. 01 40 2 960 891 - II/15

Loading

Driving tips

Load

The maximum load is the sum of the weight of
the occupants and the cargo.
The greater the weight of the occupants, the
less cargo that can be transported.

Stowing cargo
▷ Cover sharp edges and corners on the
cargo.
▷ Heavy cargo: do not exceed the maximum
load of the trunk floor. The maximum load
capacity is 61 lbs / 28 kg. Stow the cargo
as far to the front as possible and below in
the trunk.

Online Edition for Part no. 01 40 2 960 891 - II/15

143

Driving tips

Increase range

Increase range
General information
The vehicle contains comprehensive technolo‐
gies for reducing the energy consumption and
for maximizing the range.
The range depends on a number of different
factors.
The implementation of certain measures, driv‐
ing style and regular maintenance can increase
range and thereby also reduce the environ‐
mental impact.

Remove unnecessary cargo
Additional weight increases fuel consumption.

Remove attached parts
following use
Attached parts on the vehicle impair the aero‐
dynamics and increase the energy consump‐
tion.

Closing the windows
Open windows increase air resistance and
therefore lead to greater fuel consumption.

Tires
General information
Tires can affect energy consumption in various
ways, for instance energy consumption can be
influenced by tire size.

144

Check the tire inflation pressure
regularly
Check and, if needed, correct the tire inflation
pressure at least twice a month and before
starting on a long trip.
Low tire inflation pressure increases rolling re‐
sistance and thus raises energy consumption
and tire wear.

Standing air conditioning
Run advance climate control, refer to
page 127, in the vehicle during charging if pos‐
sible before driving off.
Heating and cooling operations are very en‐
ergy intensive and substantially reduce the
electric range.

Look well ahead when
driving
Avoid unnecessary acceleration and braking.
By maintaining a suitable distance to the vehi‐
cle driving ahead of you.
Driving smoothly and proactively reduces fuel
consumption.
Longer braking procedures result in more effi‐
cient charging of the high-voltage battery via
energy recovery from braking.

Use coasting
When approaching a red light, take your foot
off the accelerator and let the vehicle coast to
a halt.

Online Edition for Part no. 01 40 2 960 891 - II/15

Increase range

Driving tips

Switch off any functions that
are not currently needed

▷ What reduces the the cooling and heating
output of the climate control system.

Functions such as seat heating and the rear
window defroster require a lot of energy and
reduce the range, especially in city and stopand-go traffic.

Activate ECO PRO

Reel off these functions if they are not needed.
The ECO PRO driving program supports the
energy conserving use of comfort features.
These functions are automatically deactivated
partially or completely.

Have maintenance carried
out
Have vehicles maintained regularly to achieve
optimal vehicle efficiency and operating life.
The maintenance should be carried out by
your service center.
Also note the BMW Maintenance System, refer
to page 178.

Press button repeatedly until ECO
PRO is displayed in the instrument
cluster.

Configuring ECO PRO
Via the Driving Dynamics Control
1. Activate ECO PRO.
2. "Configure ECO PRO"
3. Configure the program.

Via the iDrive
1. "Settings"
2. "ECO PRO mode"
Or
1. "Settings"
2. "Driving mode"
3. "Configure ECO PRO"

ECO PRO

Configure the program.

The concept

ECO PRO Tip

ECO PRO supports a driving style that saves
on fuel consumption. For this purpose, the en‐
gine control and comfort features, e. g. the cli‐
mate control output, are adjusted.

▷ "Limit at:":

Under certain conditions the engine is auto‐
matically decoupled from the transmission in
the D selector lever position and the engine is
switched off. Selector lever position D remains
engaged.

Adjust the ECO PRO speed.
▷ "ECO PRO speed warning":
The output is reduced once the set ECO
PRO speed is reached.

ECO PRO climate control
"ECO PRO climate control"
Climate control is set to be fuel-efficient.

At a glance
ECO PRO
▷ Reduce heat output or heating cycle for ex‐
terior mirror, rear window and seat heating.

By making a slight change to the set tempera‐
ture, or slowly adjusting the rate of heating or
cooling of the car's interior, fuel consumption
can be economized.

Online Edition for Part no. 01 40 2 960 891 - II/15

145

Driving tips

Increase range

The outputs of the seat heater and the Addi‐
tionally heat output to seats and exterior mirror
is reduced.

instructions are displayed as a symbol in the
instrument cluster.

The mirror heating is made available when out‐
side temperatures are very cold.

Symbols

ECO PRO potential
Shows potential savings with the current set‐
tings in percentages.

An additional symbol and a text message are
displayed on the control display.
Symbol Measure
For efficient driving back off the ac‐
celerator or delay accelerating to al‐
low time to assess road conditions.

Display in the instrument cluster

Reduce speed to the selected ECO
PRO speed.

Efficiency display

Note
The efficiency display and ECO PRO tips in the
instrument cluster appear when the ECO PRO
display is activated.
Activating driving style and ECO PRO tips:
1. "Settings"
A mark in the performance display informs
about the current driving style.

2. "Instrument cluster"
3. "ECO PRO Info"

Mark in the CHARGE range, arrow 1: indication
for energy recovery and braking.

Indications on the Control Display

Mark in the ePOWER area, arrow 2: display
when accelerating.

eDRIVE

Your driving style's efficiency is shown by the
bar's color:
▷ Blue display: efficient driving style as long
as the mark moves within the blue range.

Information on fuel consumption and technol‐
ogy can be displayed while driving.
1. "Vehicle info"
2. "eDRIVE"

▷ Gray display: adjust driving style, e. g., by
reduced acceleration.

Displaying ECO PRO Tips

The display switches to blue as soon as all
conditions for fuel-efficiency-optimized driving
are met.

ECO PRO Tips can be displayed while driving
as a note in the split screen in the energy flow
display.
Displaying ECO PRO Tips:

ECO PRO Tip

1. "Vehicle info"
2. "eDRIVE"

Driving tip
As soon as one of the conditions for efficient
driving is no longer fulfilled, respective driving
146

3.

"ECO PRO Tips"

Online Edition for Part no. 01 40 2 960 891 - II/15

Increase range

Driving tips

Settings are stored for the profile currently in
use.

Online Edition for Part no. 01 40 2 960 891 - II/15

147

Online Edition for Part no. 01 40 2 960 891 - II/15

Mobility
In order to always ensure your mobility, you will
find important information on operating fluids,
wheels and tires, maintenance and Roadside
Assistance in the following.

Online Edition for Part no. 01 40 2 960 891 - II/15

Mobility

Charging vehicle

Charging vehicle
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

The concept
The vehicle can be charged using various
charging cables at charging stations or hous‐
hold sockets. Control and monitoring of the
charging process are handled completely au‐
tomatically. The charge current strength can
be set by means of the Control Display.

General information
High-voltage battery
The high-voltage battery is used as an energy
accumulator. The high-voltage battery can be
charged by energy recovery during the trip or
via the power grid.

Charge current
The charge current strength is indicated in am‐
peres.
The vehicle cannot automatically detect the
maximum permissible charge current strength
of the power grid during charging via a house‐
hold socket or charging station.

Level 1 charging
Prior to the first Level 1 charging at your own
household socket, as well as when charging at
external electrical power sockets in Level 1,
the allowed charge current strength must be
determined, e.g. by a qualified electrician.
The charge current strength for Level 1 charg‐
ing, refer to page 155, can be adjusted in the
vehicle in three steps.
At delivery, the charge current for
Level 1 charging is set to "Low".
Depending on the country-specific version,
one of four ampere ratings is printed on the
Level 1 charging cable. This ampere rating is
the limit which must be adhered to for the vehi‐
cle if the charge current is set to "Maximum".
According to the market-specific version, the
charge current strength changes differently if
the setting "Reduced" or "Low" is selected.
"Maximum"

"Reduced"

"Low"

When charging via the power grid, you can
chose between the following variants.

8A

6A

6A

▷ Level 1 charging via a household socket.

10 A

7.5 A

6A

▷ Level 2 charging via a Level 2 charging sta‐
tion.

12 A

9A

6A

15 A

11.25 A

7.5 A

Level 1 charging is possible via a household
socket within a voltage range of 100 volts to
240 volts.
For optimal use of the energy from the power
grid, charging at a Level 2 charging station,
such as BMW i Wallbox, is recommended.

150

Depending on the charge current, the charging
duration changes.

Online Edition for Part no. 01 40 2 960 891 - II/15

Charging vehicle

Maintaining charging state
Should it be necessary, e.g., to conserve the
electrical range for a later point in time on the
trip, the current charging state of the high-volt‐
age battery can be maintained with Maintain‐
ing charging state, refer to page 64.

Hints

Mobility

property damage from burning fuel vapors,
e.g., if the charging cable is improperly plug‐
ged in or unplugged.◀
Have the charging port cleaned by
trained personnel
If the charging port is dirty, have the car
cleaned only by appropriately trained person‐
nel. Otherwise, there is a danger of injury from
high voltage.◀

Working with electrical current
When working with electrical current, ob‐
serve the safety regulations. Otherwise, with
high voltage or excess current there is a risk to
persons and property, e.g., from electrocution
or fire.◀
Have the charging device checked be‐
fore commissioning
Before the initial charging process, have your
own charging device checked at the charging
location by a qualified electrician, that is,
charging port on the vehicle, charging cable,
charging station or household socket and con‐
nected circuits. Otherwise, there is a danger of
damage to the vehicle and overloading of the
supply mains at the charging location.◀
Follow instructions at the charging sta‐
tion
When working with electrical current, follow
the instructions at the charging station. Other‐
wise, there is a risk of an accident.◀
Make sure that the charging device is in
flawless operating condition
Only use the charging device in a flawless con‐
dition. Otherwise, a risk of fire may result, e.g.,
from the device heating up because of, say,
worn contacts or damage.◀
No simultaneous charging and refueling
Do not refuel while a charging cable is
plugged in, and maintain an adequate safety
distance from highly flammable materials. Oth‐
erwise, there is a danger of personal injury and

Charging cable
General information
Use a Level 1 charging cable, Level 2 charging
cable or the permanently installed charging ca‐
ble of a charging station to charge the vehicle.
Different charging cables can be required de‐
pending on the country.

Hints
Use approved charging cables only
Use only approved charging cables or
charging stations for charging. Otherwise,
there is a danger of property damage or per‐
sonal injury, e.g., from burning cables. Informa‐
tion about the approved charging cables can
be obtained from the service center.◀
Use the charging cable only for charging
the vehicle, and do not extend it
Use the charging cable only for charging the
vehicle and do not extend it with cables or
adapters. Otherwise, it may not be possible to
complete the charging process or property
damage might occur, e.g., due to a cable fire.◀
Do not use any damaged charging cables
Do not use any damaged charging ca‐
bles. Otherwise, there is a risk of injury from
high voltage.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

151

Mobility

Charging vehicle

Level 1 charging cable

Connection

With the Level 1 charging cable, it is permissi‐
ble to perform charging from grounded house‐
hold sockets. At the power connection of a
household socket, charging is done with alter‐
nating current.

To connect, engage selector lever in position P
and unlock the vehicle. Set the parking brake if
needed.
1. Tap on the charging port flap, arrow.

When a Level 1 charging cable is used, this
may produce efficiency values other than indi‐
cated on the energy label.

Level 2 charging cable
The Level 2 charging cable makes it possible
to recharge at sockets of designated
Level 2 charging stations using a special plug.
Charging is performed with alternating current
at designated Level 2 charging stations. The
charging process can be completed faster than
at household sockets.

2. Connect either a Level 1 or Level 2 charg‐
ing cable to the household socket or the
port on the charging station.

If necessary, the charging cable is attached to
the charging station.

3. Remove cover of the charging cable plug if
needed.

Storage

4. Insert the charging cable plug correspond‐
ing to the charging port, and push it in until
it latches.

The Level 1 charging cable is located in the
trunk.
The Level 2 charging cable can be stored in
the same place.
If required, store the charging cable with the
installed plug cover to prevent moisture in the
charging cable plug.

When charging at a charging station, follow the
instructions at the charging station.

Remove
When the vehicle is locked, the charging cable
is locked. Unlock the vehicle before removing
the cable.
1. Unlock the vehicle by remote control if it is
locked.
Charging cable is unlocked.
2. Press the release button on the handle, ar‐
row 1, and grasp the charging cable at the
gripping areas.

152

Online Edition for Part no. 01 40 2 960 891 - II/15

Charging vehicle

Charging process is interrupted.

3. Remove the charging cable from the
charging port, arrow 2.
4. Close the charging port flap.

Mobility

Pull the blue knob, Arrow 2. Charging
cable is manually unlocked.

3. Grasp the charging cable at the gripping
areas.

5. Attach cover of the charging cable plug if
needed.

4. Remove charging cable.

6. Disconnect either the Level 1 or Level 2
charging cable from the household socket
or the port on the charging station as
needed.

Charging operation

7. Stow the charging cable.
At a charging station, insert the perma‐
nently installed charging cable in the place
provided for it.

Manual release
The charging cable may be locked during the
charging process if the vehicle is locked.

Manual unlocking of the charging
cable
In case of an electrical malfunction, the charg‐
ing cable can be manually unlocked.
When charging at a charging station, complete
the charging process at the charging station
before unlocking the charging cable.
1. Open door on the side of the charging port
flap.
2. Open cover, arrow 1.

Hints
Following safety instructions of the
power mains connection
During the charging process, heed the safety
instructions of the respective power mains
connection. Otherwise, there could be a risk of
personal injury or property damage from high
voltage, e.g., from electrocution or fire.◀
Using a Level 1 charging cable at other
household sockets
Before charging at other household sockets,
adapt the charging current strength to the
mains. Otherwise, there is a risk of fire, e.g.,
from overheating of the household socket or
overloading of the power mains.◀

Starting charging process
1. Engage selector lever position P. Set the
parking brake if needed.
2. Planning charging process, refer to
page 154.
3. Switch off drive readiness.

Online Edition for Part no. 01 40 2 960 891 - II/15

153

Mobility

Charging vehicle

4. Connect either a Level 1 or Level 2 charg‐
ing cable to the household socket or the
port on the charging station.
5. Open charging port flap.
6. Connect charging cable to the vehicle, re‐
fer to page 152.
At high temperatures, initially the high-voltage
battery is cooled. The charging process can be
started with a delay.

Display of the charging status
The charging status is indicated by the indica‐
tor light at the charging port.

Additional messages regarding the charging
status, e.g., probable end of charging or the
planned departure time, can be displayed in
the instrument cluster, on the Control Display
and via the BMW i Remote App on the smart‐
phone.

Planning charging process
The charging process can be adapted to con‐
straints, e.g., the cost of electricity. The vehicle
can control the charging process in such a way
that the charging process is completed at the
departure time. A departure time must be set
for this purpose, refer to page 156.
The following settings are available:
▷ Immediate charging.
▷ Set time window for favorable charging.
▷ Set charging via a Level 1 charging cable.

▷ Lamp white: charging cable can be con‐
nected or removed.
▷ Lamp flashes yellow: charging process is
being initialized
▷ Lamp blue: charging process is started at a
set time.

If drive readiness is switched off, changes can
be made on the Control Display. Departure
time can only be changed once. Scheduled de‐
parture times are not adjusted. Settings for
standing air conditioning and loading process
are accepted for planned departure times too.

Immediate charging
The charging process starts as soon as the
charging cable is connected.

▷ Lamp flashes blue: charging process ac‐
tive.

1. "Settings"

▷ Lamp flashes red: fault in the charging
process.

3. "Charge immediately"

▷ Lamp green: charging process completed.
When the vehicle is locked, the indicator lamp
goes out after some time.
When the vehicle is unlocked, the blue indica‐
tor lamp flashes continuously. The other indi‐
cator lights go out after some time.
To check the charging process, press the
key on the remote control. The charging status
is indicated on the indicator lamp. In some
cases the vehicle is locked.

154

2. "Charging"

Setting time window for favorable
charging
When departure time is set, a time window for
charging with a favorable electricity rate can be
set.
1. "Settings"
2. "Charging"
3. "Low cost charging"

Online Edition for Part no. 01 40 2 960 891 - II/15

Charging vehicle

4. Set rate begin. Turn the controller until the
desired time is set and press the controller.
5. Set rate end. Turn the controller until the
desired time is set and press the controller.

Setting charging via a
Level 1 charging cable
Depending on the electrical mains, the vehicle
must be charged with a different charging cur‐
rent strength, refer to page 150.
1. "Settings"
2. "Charging"
3. "AC charging power:"
Settings are stored. When you change charg‐
ing locations you also might need to change
the setting for charging.
Set the charge current strength at other
household sockets to "Low".

Stopping charging process
The charging operation can be stopped at any
time by removing the charging cable and con‐
tinued at a later time by connecting the charg‐
ing cable in order to use other loads on the
power connection or to prevent simultaneous
high power from multiple loads.
The charging operation is interrupted when the
vehicle is unlocked and automatically resumed
after a brief time or when it is locked.

Continue charging operation
If the charging operation is interrupted, e.g.,
through a temporary power failure, the charg‐
ing operation is automatically continued after
the interruption.

Terminating charging process
1. Removing the charging cable from the ve‐
hicle, refer to page 152.
2. Stow the charging cable as required.
3. Close the charging port flap.

Mobility

Displays in the instrument
cluster
The charging state indicator light, refer to
page 77, shows the charging state of the highvoltage battery in the instrument cluster, if op‐
erating readiness is switched on. If all seg‐
ments are filled, the high-voltage battery is
fully charged.
Even if no segments are filled, the high-voltage
system is still under high voltage.
Information regarding the charging process are
shown on the charging screen, refer to
page 76.
Display Meaning
Blue plug: charging process active
or completed.
White plug: charging interruption.
Running light: animated with active
charging operation.
End of charging time or set depar‐
ture time.
Charging progress bar.

Indicator in blue: charged electrical
range.
Indicator in white: maximum electri‐
cal range.
White clock: departure time set.
Blue plug: charging process active
or completed.
White plug: charging interruption.
Climate control activated at depar‐
ture time.
Flashing: ventilation active.

4. Lock vehicle if it is unlocked.

Online Edition for Part no. 01 40 2 960 891 - II/15

155

Mobility

Charging vehicle

4. Set the day of the week if needed.

Display Meaning
Flashing: heating active.

Flashing: cooling active.

Turn the controller until the desired day of
the week is set and press the controller.
To select other days of the week, repeat
the operation.
5. Set the time.
Turn the controller until the desired time is
set and press the controller.
Up to three departure times can be set.

Departure time

Activating the departure time

The concept
For optimum range and climate control, the
departure time can be set before parking the
car.
With a set departure time, the vehicle is cli‐
mate controlled during the charging process
when climate control is set. Climate control
output is reduced during the trip. This in‐
creases the range during electric driving.
The following settings are possible at depar‐
ture time:
▷ Climate control at departure time.
▷ Planning a one-time departure time.
▷ Planning of up to three regular departure
times per day of the week.
If drive readiness is switched off, changes can
be made on the Control Display. Departure
time can only be changed once. Scheduled de‐
parture times are not adjusted. Settings for cli‐
mate control and charging operation are also
applied for scheduled departure times.

Climate control at departure time
1. "Settings"
2. "Departure time"
3. "Precond. for departure"

Setting departure time

1. "Settings"
2. "Departure time"
Set departure times are displayed.
3. E. g. "Activate depart. time 1"
Up to three departure times can be activated.
The set departure time will be deactivated, if
the departure time was ignored three times in
a row.

Climate control
General information
The following settings for climate control of
the vehicle are possible:
▷ Activate stationary climate control immedi‐
ately, refer to page 127.
With stationary climate control activated
and no charging cable connected, the
range is reduced.
▷ Planned climate control at the set depar‐
ture time, refer to page 128.

Discharged high-voltage and
vehicle battery

1. "Settings"

General information

2. "Departure time"

In addition to the high-voltage battery, the ve‐
hicle has a 12 volt vehicle battery, which is re‐

3. "Departure 1:"
156

Online Edition for Part no. 01 40 2 960 891 - II/15

Charging vehicle

Mobility

quired for operation of the onboard electron‐
ics.
With a discharged vehicle battery, no operation
of the vehicle is possible.

Place vehicle in service
To place the vehicle in service, charge as
usual.
If there is no possibility of charging on site,
contact the service center.

Charging vehicle with a discharged
vehicle battery
1. Unlock the vehicle, if needed, using the
integrated key, refer to page 38.
2. Secure the vehicle against rolling.
3. Connect either a Level 1 or Level 2 charg‐
ing cable to the household socket or the
port on the charging station.
4. Attach charging cable corresponding to
the charging socket connection.
Charging is started. The charging status is
not displayed. Do not open vehicle during
this time.
After several minutes, the vehicle is slightly
charged. The onboard electronics are ready
again. It is again possible to open the vehicle.
The charging status as well as the charging
state of the high-voltage battery can be dis‐
played again.
If the vehicle battery cannot be charged, con‐
tact the service center.

Online Edition for Part no. 01 40 2 960 891 - II/15

157

Mobility

Refueling

Refueling
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

cle, e.g., alternating drive with combustion en‐
gine or electric motor.

General information
In the fuel tank, excess pressure can build up
due to gasoline vapors which are dissipated
before the tank lid is opened.

Overview
The button is located on the driver's side on
the door armrest.

Tank venting

Hints
Observe the fuel recommendation, refer to
page 161, prior to refueling.

1. Switch off drive readiness.
2.

Refuel promptly
Refuel no later than at a range of
30 miles/50 km or engine operation might fail
and damage might occur.◀
To also ensure all engine functions under un‐
favorable conditions, e.g. steep vehicle inclina‐
tions, at least 2.6 US gal/10 liters fuel should
be refueled.
Do not refuel unless the engine is at a
standstill and the selector lever is in posi‐
tion P/N
Do not refuel unless the engine is at a standstill
and the selector lever is in position P/N, other‐
wise the buildup of pressure may cause the
fuel nozzle to shut off prematurely.◀

Press button to start the pressure
equalization.
The status of the tank venting is displayed
in the instrument cluster. In rare cases, the
tank venting can last several minutes.
If the tank venting has been completed, a
message is displayed in the instrument
cluster. The tank lid is released for open‐
ing.

3. Open the fuel filler flap.
If the fuel filler flap is not opened within 10
minutes after the fuel filler flap was re‐
leased, the fuel filler flap relocks. Press
button again.

Fuel lid
Tank vent

Opening

The concept

Before opening , vent the tank, refer to
page 158.

The vehicle is equipped with a special fuel
tank. It is designed for special requirements
that arise with the hybrid operation of the vehi‐

158

Online Edition for Part no. 01 40 2 960 891 - II/15

Refueling

1. Briefly press the rear edge of the fuel filler
flap.

Mobility

Manually unlocking fuel filler flap
In the event of an electrical malfunction, e.g.
The release is located in the trunk.
1. Open the cover on the right side trim.

2. Turn the tank lid counterclockwise.
2. Pull the green knob with the fuel pump
symbol. This releases the fuel filler flap.

3. Place the tank lid in the bracket attached to
the fuel filler flap.
3. Open the fuel filler flap.
4. Carefully open the fuel filler flap. Excess
pressure can build up in the fuel tank from
gasoline vapor.

Closing
1. Fit the lid and turn it clockwise until you
clearly hear a click.
2. Close the fuel filler flap.
Do not pinch the retaining strap
Do not pinch the retaining strap attached
to the lid; otherwise, the lid cannot be closed
properly and fuel vapors can escape.◀

5. Fuel the vehicle as usual. This may be diffi‐
cult due to the residue pressure in the
tank, caused by frequent stopping of the
fuel pump nozzle, e.g.

Online Edition for Part no. 01 40 2 960 891 - II/15

159

Mobility

Refueling

Observe the following when
refueling
The fuel tank is full when the filler nozzle clicks
off the first time.
Do not overfill the fuel tank
Do not overfill the fuel tank; otherwise
fuel may eslide, causing harm to the environ‐
ment and damaging the vehicle.◀
Handling fuels
Observe safety regulations posted at the
gas station.◀
No simultaneous charging and refueling
Do not refuel while a charging cable is
plugged in, and maintain an adequate safety
distance from highly flammable materials. Oth‐
erwise, there is a danger of personal injury and
property damage from burning fuel vapors,
e.g., if the charging cable is improperly plug‐
ged in or unplugged.◀

160

Online Edition for Part no. 01 40 2 960 891 - II/15

Fuel

Mobility

Fuel
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Fuel recommendation
Note
General fuel quality
Even fuels that conform to the specifica‐
tions can be of low quality. This may cause en‐
gine problems, for instance poor engine startup behavior, poor handling and/or poor
performance. Switch gas stations or use a
brand name fuel with a higher octane rating.◀

Gasoline
For the best fuel efficiency, the gasoline
should be sulfur-free or very low in sulfur con‐
tent.
Fuels that are marked on the gas pump as con‐
taining metal must not be used.
Refuel only with unleaded gasoline with‐
out metallic additives.
Do not refuel with any leaded gasoline or gaso‐
line with metallic additives, e. g. manganese or
iron, as this can cause permanent damage to
the catalytic converter and other compo‐
nents.◀
Fuels with a maximum ethanol content of
25 %, i. e. E10 or E25, may be used for refuel‐
ing.

Ethanol should satisfy the following quality
standards:
US: ASTM 4806–xx
CAN: CGSB-3.511–xx
xx: comply with the current standard in each
case.
Do not use a fuel with a higher percent‐
age of ethanol
Do not use a fuel with a higher ethanol per‐
centage than recommended or one with other
types of alcohol, e.g. M5 to M100; otherwise
this could damage the engine and fuel supply
system.◀

Recommended fuel grade
BMW recommends AKI 93.

Minimum fuel grade
BMW recommends AKI 91.
Minimum fuel grade
Do not use any gasoline below the mini‐
mum fuel grade as this may impair engine per‐
formance.◀
If you use gasoline with this minimum AKI Rat‐
ing, the engine may produce knocking sounds
when starting at high outside temperatures.
This has no effect on the engine life.
Fuel quality
The use of poor-quality fuels may result
in harmful engine deposits or damage. Addi‐
tionally, problems relating to drivability, start‐
ing and stalling, especially under certain envi‐
ronmental conditions such as high ambient
temperature and high altitude, may occur.
If drivability problems are encountered, we rec‐
ommend switching to a high quality gasoline
brand and a higher octane grade — AKI num‐
ber — for a few tank fills. To avoid harmful en‐

Online Edition for Part no. 01 40 2 960 891 - II/15

161

Mobility

Fuel

gine deposits, it is highly recommended to
purchase gasoline from Top Tier retailers.
Failure to comply with these recommendations
may result in the need for unscheduled main‐
tenance.◀

162

Online Edition for Part no. 01 40 2 960 891 - II/15

Wheels and tires

Mobility

Wheels and tires
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Tire inflation pressure
Safety information

Only check the tire inflation pressure when the
tires are cold. This means after driving no more
than 1.25 miles/2 km or when the vehicle has
been parked for at least 2 hours.
The displays of inflation devices may underread by up to 1.45 psi/0.1 bar.
For Flat Tire Monitor: after correcting the tire
inflation pressure, reinitialize the Flat Tire
Monitor.
For Tire Pressure Monitor: after correcting the
tire inflation pressure, reset the Tire Pressure
Monitor.

Tire inflation pressure specifications

▷ Driving comfort.

The tire inflation pressure table, refer to
page 164, contains all tire inflation pressure
specifications for the specified tire sizes at the
ambient temperature. Tire inflation pressure
specifications apply to approved tire sizes and
recommended tire brands. This information
can be obtained from your service center.

Checking the tire inflation pressure

To identify the correct tire inflation pressure,
please note the following:

The tire characteristics and tire inflation pres‐
sure influence the following:
▷ The service life of the tires.
▷ Road safety.

Check the tire inflation pressure regularly
Regularly check the tire inflation pres‐
sure, and correct it as needed: at least twice a
month and before a long trip. If you fail to ob‐
serve this precaution, you may be driving on
tires with incorrect tire pressures, a condition
that may not only compromise your vehicle's
driving stability, but also lead to tire damage
and the risk of an accident.◀

▷ Tire sizes of your vehicle.
▷ Maximum permitted driving speed.

Tire inflation pressures up to
100 mph/160 km/h
For speeds of up to 100 mph/160 km/h and for
optimum driving comfort, note the pressure
values in the tire inflation pressure table, refer
to page 164, and adjust as necessary.

Tires have a natural, consistent loss of tire in‐
flation pressure.
Tires heat up while driving, and the tire infla‐
tion pressure increases along with the tire's
temperature. The tire inflation pressure speci‐
fications relate to cold tires or tires with the
ambient temperature.

Online Edition for Part no. 01 40 2 960 891 - II/15

163

Mobility

Wheels and tires

Tire inflation pressures at max.
speeds above 100 mph/160 km/h
Speeds above 100 mph/160 km/h

These pressure values can also be found on
the tire inflation pressure label on the driver's
door pillar.
Maximum permissible speed
Do not exceed 100 mph/160 km/h; other‐
wise, tire damage and accidents may result.◀

Tire inflation pressure values up to
100 mph/160 km/h
i8
Tire size

Pressure specifications in
bar/PSI

Specifications in
bar/PSI with cold
tires
215/45 R 20 95
V M+S XL Std

2.2 / 32

2.2 / 32

F: 195/50 R 20
93 W XL Std

2.2 / 32

-

-

2.2 / 32

2.2 / 32

-

-

2.2 / 32

R: 215/45 R 20
95 W XL Std
F: 215/45 R 20
95 W XL Std
R: 245/40 R 20
99 W XL Std

In order to drive at maximum speeds in
excess of 100 mph/160 km/h, please observe,
and, if necessary, adjust tire pressures for
speeds exceeding 100 mph/160 km/h from the
relevant table on the following pages. Other‐
wise tire damage and accidents could occur.◀

Tire inflation pressure values over
100 mph/160 km/h
i8
Tire size

Pressure specifications in
bar/PSI

Specifications in
bar/PSI with cold
tires
215/45 R 20 95
V M+S XL Std

2.3 / 33

2.8 / 41

F: 195/50 R 20
93 W XL Std

2.5 / 36

-

-

3.0 / 44

2.3 / 33

-

-

2.8 / 41

R: 215/45 R 20
95 W XL Std
F: 215/45 R 20
95 W XL Std
R: 245/40 R 20
99 W XL Std

Tire identification marks
Tire size
245/45 R 18 96 Y
245: nominal width in mm
45: aspect ratio in %
R: radial tire code

164

Online Edition for Part no. 01 40 2 960 891 - II/15

Wheels and tires

Mobility

18: rim diameter in inches

Temperature A B C

96: load rating, not for ZR tires

All passenger car tires must conform to Fed‐
eral Safety Requirements in addition to these
grades.

Y: speed rating, before the R on ZR tires

Speed letter
Q = up to 100 mph, 160 km/h
R = up to 106 mph, 170 km/h
S = up to 112 mph, 180 km/h
T = up to 118 mph, 190 km/h
H = up to 131 mph, 210 km/h
V = up to 150 mph, 240 km/h
W = up to 167 mph, 270 km/h
Y = up to 186 mph, 300 km/h

Tire Identification Number
DOT code: DOT xxxx xxx 0115

Treadwear
The treadwear grade is a comparative rating
based on the wear rate of the tire when tested
under controlled conditions on a specified gov‐
ernment test course. For example, a tire
graded 150 would wear one and one-half, 1 g,
times as well on the government course as a
tire graded 100. The relative performance of
tires depends upon the actual conditions of
their use, however, and may depart signifi‐
cantly from the norm due to variations in driv‐
ing habits, service practices and differences in
road characteristics and climate.

xxxx: manufacturer code for the tire brand

Traction

xxx: tire size and tire design

The traction grades, from highest to lowest,
are AA, A, B, and C.

0115: tire age
Tires with DOT codes meet the guidelines of
the U.S. Department of Transportation.

Tire age
DOT … 0115: the tire was manufactured in the
1st week of 2015.

Recommendation
Regardless of wear and tear, replace tires at
least every 6 years.

Uniform Tire Quality Grading
Quality grades can be found where applicable
on the tire sidewall between tread shoulder
and maximum section width.
For example: Treadwear 200; Traction AA;
Temperature A

DOT Quality Grades
Treadwear
Traction AA A B C

Those grades represent the tire's ability to
stop on wet pavement as measured under
controlled conditions on specified government
test surfaces of asphalt and concrete. A tire
marked C may have poor traction performance.
The traction grade assigned to this tire is
based on straight-ahead braking traction tests,
and does not include acceleration, cornering,
hydroplaning, or peak traction characteristics.

Temperature
The temperature grades are A, the highest, B,
and C, representing the tire's resistance to the
generation of heat and its ability to dissipate
heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the ma‐
terial of the tire to degenerate and reduce tire
life, and excessive temperature can lead to
sudden tire failure. The grade C corresponds
to a level of performance which all passenger
car tires must meet under the Federal Motor
Vehicle Safety Standard No. 109. Grades Band

Online Edition for Part no. 01 40 2 960 891 - II/15

165

Mobility

Wheels and tires

A represent higher levels of performance on
the laboratory test wheel than the minimum re‐
quired by law.

Minimum tread depth

Temperature grade for this tire
The temperature grade for this tire is es‐
tablished for a tire that is properly inflated and
not overloaded. Excessive speed, underinfla‐
tion, or excessive loading, either separately or
in combination, can cause heat buildup and
possible tire failure.
If necessary, have the vehicle towed.◀

M+S

Wear indicators are distributed around the
tire's circumference and have the legally re‐
quired minimum height of 0.063 in/1.6 mm.

Winter and all-season tires with better cold
weather performance than summer tires.

They are marked on the side of the tire with
TWI, Tread Wear Indicator.

Tire tread

Tire damage

Summer tires

General information

Do not drive with a tire tread depth of less than
0.12 in/3 mm.

Inspect your tires often for damage, foreign
objects lodged in the tread, and tread wear.

There is an increased danger of hydroplaning if
the tire tread depth is less than 0.12 in/3 mm.

Winter tires
Do not drive with a tire tread depth of less than
0.16 in/4 mm.
Below a tread depth of 0.16 in/4 mm, tires are
less suitable for winter operation.

Hints
Driving over rough or damaged road surfaces,
as well as debris, curbs and other obstacles
can cause serious damage to wheels, tires and
suspension parts. This is more likely to occur
with low-profile tires, which provide less cush‐
ioning between the wheel and the road. Be
careful to avoid road hazards and reduce your
speed, especially if your vehicle is equipped
with low-profile tires.
Indications of tire damage or other vehicle de‐
fects:
▷ Unusual vibrations while driving.
▷ Unusual handling such as a strong ten‐
dency to pull to the left or right.
Damage can, e. g., be caused by driving over
curbs, road damage, or similar things.

166

Online Edition for Part no. 01 40 2 960 891 - II/15

Wheels and tires

In case of tire damage
If there are indications of tire damage, re‐
duce your speed immediately and have the
rims and tires checked right away; otherwise,
there is the increased risk of an accident.
Drive carefully to the nearest service center. If
necessary, have the vehicle towed or trans‐
ported there. Otherwise, tire damage can be‐
come life threatening for vehicle occupants
and also other traffic.◀
Repair of tire damage
For safety reasons, the manufacturer of
your vehicle recommends that you do not have
damaged tires repaired; they should be re‐
placed. Otherwise, damage can occur as a re‐
sult.◀

Mobility

Approved wheels and tires
You should only use wheels and tires
that have been approved by the vehicle manu‐
facturer for your vehicle type; otherwise, e.g.,
despite having the same official size ratings,
variations can lead to chassis contact and with
it, the risk of severe accidents
The manufacturer of your vehicle cannot eval‐
uate non-approved wheels and tires to deter‐
mine if they are suited for use, and therefore
cannot guarantee the operating safety of the
vehicle.◀

Recommended tire brands

Changing wheels and tires
Mounting
Information on mounting tires
Have mounting and balancing performed
only by a service center.
If work is not carried out properly, there is a
danger of subsequent damage and related
safety hazards.◀

For each tire size, the manufacturer of your ve‐
hicle recommends certain tire brands. These
can be identified by a star on the tire sidewall.
With proper use, these tires meet the highest
standards for safety and handling.

Wheel and tire combination

New tires

You can ask the service center about the right
wheel/tire combination and wheel rim versions
for the vehicle.

Tire traction is not optimal due to manufactur‐
ing circumstances when tires are brand-new;
they achieve their full traction potential after a
break-in time.

Incorrect wheel and tire combinations impair
the function of a variety of systems such as
ABS or DSC.
To maintain good handling and vehicle re‐
sponse, use only tires with a single tread con‐
figuration from a single manufacturer.
Following tire damage, have the original wheel
and tire combination remounted on the vehicle
as soon as possible.

Drive conservatively for the first
200 miles/300 km.

Retreaded tires
The manufacturer of your vehicle does not rec‐
ommend the use of retreaded tires.

Online Edition for Part no. 01 40 2 960 891 - II/15

167

Mobility

Wheels and tires

Mobility System

Retreaded tires
Possibly substantial variations in the de‐
sign and age of the tire casing structures can
limit service life and have a negative impact on
road safety.◀

Winter tires
Winter tires are recommended for operating on
winter roads.
Although so-called all-season M+S tires pro‐
vide better winter traction than summer tires,
they do not provide the same level of perform‐
ance as winter tires.

Maximum speed of winter tires
If the maximum speed of the vehicle is higher
than the permissible speed for the winter tires,
then a respective symbol is displayed in your
field of vision. You can obtain this sign from the
tire specialist or from your service center.
Maximum speed for winter tires
Do not exceed the maximum speed for
the respective winter tires; otherwise, tire dam‐
age and accidents can occur.◀

Rotating wheels between axles
Different wear patterns can occur on the front
and rear axles depending on individual driving
conditions. The tires can be rotated between
the axles to achieve even wear. Your service
center will be glad to advise you. After rotating,
check the tire pressure and correct if needed.
Rotating the tires is not permissible on vehi‐
cles with different tire sizes or rim sizes on the
front and rear axles.

Storage
Store wheels and tires in a cool, dry place with
as little exposure to light as possible.
Always protect tires against all contact with oil,
grease and fuels.

The concept
With the Mobility System, minor tire damage
can be sealed quickly to enable continued
travel. To accomplish this, sealant is pumped
into the tires, which seals the damage from the
inside.
The compressor can be used to check the tire
inflation pressure.

Hints
▷ Follow the instructions on using the Mobi‐
lity System found on the compressor and
sealant container.
▷ Use of the Mobility System may be ineffec‐
tive if the tire puncture measures approx.
1/8 in/4 mm or more.
▷ Contact the nearest service center if the
tire cannot be made drivable.
▷ If possible, do not remove foreign bodies
that have penetrated the tire.
▷ Pull the speed limit sticker off the sealant
container and apply it to the steering
wheel.
▷ The use of a sealant can damage the TPM
wheel electronics. In this case, have the
electronics checked at the next opportu‐
nity and have them replaced if needed.
Enclosed areas
Do not let the engine run in enclosed
areas, since breathing in exhaust fumes may
lead to loss of consciousness and death. The
exhaust gases contain carbon monoxide, an
odorless and colorless but highly toxic gas.◀

Storage
The Mobility System is located behind the left
side trim in the trunk.

Do not exceed the maximum tire inflation pres‐
sure indicated on the side wall of the tire.
168

Online Edition for Part no. 01 40 2 960 891 - II/15

Wheels and tires

Mobility

Filling the tire with sealant

Sealing container

1. Shake the sealing container.

▷ Sealing container, arrow 1.
▷ Filling hose, arrow 2.
Observe use-by date on the sealant container.

2. Take the connection hose completely out
of the compressor housing. Do not kink the
hose.

Compressor

3. Attach the connection hose to the connec‐
tor of the sealing container, ensuring that it
engages audibly.

1

On/off reel

2

Holder for bottle

3

Reduce inflation pressure

4

Inflation pressure dial

5

Compressor

6

Connector/cable for socket

7

Connection hose — stowed in the bottom
of the compressor

Online Edition for Part no. 01 40 2 960 891 - II/15

169

Mobility

Wheels and tires

4. Slide the sealing container upright into the
holder on the compressor housing, ensur‐
ing that it engages audibly.

5. Screw the connection hose onto the tire
valve of the defective wheel.

7. With operating readiness or drive readi‐
ness switched on, reel on the compressor.

Switch off the compressor after 10 mi‐
nutes
Do not allow the compressor to run longer than
10 minutes; otherwise, the device will overheat
and may be damaged.◀
Let the compressor run for approx. 3 to 8 mi‐
nutes to fill the tire with sealant and achieve a
tire inflation pressure of approx. 2.5 bar.
While the tire is being filled with sealant, the
tire inflation pressure may sporadically reach
approx. 5 bar. Do not reel off the compressor at
this point.

6. With the compressor switched off, insert
the plug into a power socket inside the ve‐
hicle.

If a tire inflation pressure of 2 bar is not
reached:
1. Switch off the compressor.
2. Unscrew the filling hose from the wheel.
3. Drive 33 ft/10 m forward and back to dis‐
tribute the sealant in the tire.
4. Inflate the tire again using the compressor.
If a tire inflation pressure of 2 bar cannot be
reached, contact your service center.

Stowing the Mobility System
1. Remove the connection hose of the seal‐
ant container from the wheel.
2. Remove the connection hose from the
sealant container.

170

Online Edition for Part no. 01 40 2 960 891 - II/15

Wheels and tires

3. Wrap the empty sealant container and con‐
nection hose in suitable material to avoid
dirtying the cargo area.

Mobility

4. Insert the connector into a power socket
inside the vehicle.

4. Stow the Mobility System back in the vehi‐
cle.

Distributing the sealant
Immediately drive approx. 5 miles/10 km to en‐
sure that the sealant is evenly distributed in the
tire.
Do not exceed a speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.

5. Correct the tire inflation pressure to
2.5 bar.

1. Stop at a suitable location.

▷ Increase pressure: with operating read‐
iness or drive readiness switched on,
reel on the compressor.

2. Screw the connection hose onto the tire
valve stem.

▷ To reduce the pressure: press the but‐
ton on the compressor.

To correct the tire inflation pressure

Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Tire Pressure Monitor.
Replace the defective tire and the sealant con‐
tainer of the Mobility System as soon as possi‐
ble.
3. Attach the connection hose directly to the
compressor.

Snow chains
Fine-link snow chains
Only certain types of fine-link snow chains
have been tested by the manufacturer of the
vehicle, classified as road-safe and approved.
Information about the approved snow chains
are available from the service center.

Use
Use only in pairs on the rear wheels, equipped
with the tires of the following size:
▷ 215/45 R 20
Follow the snow chain manufacturer's instruc‐
tions.

Online Edition for Part no. 01 40 2 960 891 - II/15

171

Mobility

Wheels and tires

Make sure that the snow chains are always
sufficiently tight. Retighten as needed accord‐
ing to the chain manufacturer's instructions.
Do not initialize the Tire Pressure Monitor after
mounting snow chains, as doing so may result
in incorrect readings.
When driving with snow chains, activate the
Sport program with the selector lever. This en‐
sures that the rear wheels are being powered.
When driving with snow chains, briefly activate
Dynamic Traction Control if needed.

Maximum speed with snow chains
Do not exceed a speed of 30 mph/50 km/h
when using snow chains.

172

Online Edition for Part no. 01 40 2 960 891 - II/15

Engine oil

Mobility

Engine oil
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Requirements
A current measured value is available after ap‐
prox. 30 minutes of driving. During a shorter
trip, the status of the last, sufficiently long trip
is displayed.
With frequent short-distance trips, regularly
perform a detailed measurement.

Displaying the engine oil level
On the Control Display:
1. "Vehicle info"

General information
The engine oil consumption is dependent on
the driving style and driving conditions. When
a sporty driving style is used, the engine oil
consumption, e.g., is clearly higher.
Therefore, regularly check the engine oil level
after refueling.
When a dynamic driving style is used, such as
when cornering fast, the system is unable to
measure the engine oil level. With this driving
style, measure the engine oil level using a de‐
tailed measurement, refer to page 173.
The vehicle is equipped with electronic oil
measurement.

2. "Vehicle status"
3.

"Engine oil level"

Engine oil level display messages
Different messages appear on the display de‐
pending on the engine oil level. Pay attention
to these messages.
If the engine oil level is too low, within the next
125 miles/200 km Add engine oil, refer to
page 175.
Engine oil level too low
Add engine oil immediately; otherwise,
an insufficient amount of engine oil could re‐
sult in engine damage.◀
Take care not to add too much engine oil.

Electronic oil measurement

Too much engine oil
Have the vehicle checked immediately;
otherwise, surplus engine oil can lead to en‐
gine damage.◀

Status display
The concept
The engine oil level is monitored electronically
while driving and shown on the Control Dis‐
play.

Detailed measurement

If the engine oil level reaches the minimum
level, a check control message is displayed.

In the detailed measurement the engine oil
level is checked and displayed via a scale.

The concept

Gasoline engine:

Online Edition for Part no. 01 40 2 960 891 - II/15

173

Mobility

Engine oil

If the engine oil level reaches the minimum
level, a check control message is displayed.
Diesel engine:

Never reach into the engine compart‐
ment

During the measurement, the idle speed is in‐
creased somewhat.

Never reach into spaces or gaps in the engine
compartment; otherwise, there is a risk of in‐
jury, e.g., from rotating or hot parts.◀

Requirements

Removing covers

▷ Vehicle is on level road.

1. Turn screws counterclockwise to undo
them, arrows 1, and remove cargo cover,
arrow 2.

▷ Drive readiness is established.
▷ Selector lever position N engaged and ac‐
celerator pedal not depressed.
▷ Engine is running and is at operating tem‐
perature.

Performing a detailed measurement
In order to perform a detailed measurement of
the engine oil level:
1. "Vehicle info"
2. Remove insulation.

2. "Vehicle status"
3.

"Measure engine oil level"

4. "Start measurement"
The engine oil level is checked and displayed
via a scale.
Time: approx. 1 minute.

Engine compartment access
The engine compartment is located under the
tailgate.
Working in the engine compartment

3. Turn screws counterclockwise to undo
them and remove engine compartment
cover, arrow .

Never attempt to perform any service or
repair operations on your vehicle without the
necessary professional technical training.
If you are unfamiliar with the statutory guide‐
lines, have any work on the vehicle performed
only by a service center.
If work is not carried out properly, there is a
danger of subsequent damage and related
safety hazards.◀

174

Online Edition for Part no. 01 40 2 960 891 - II/15

Engine oil

Mobility

Attaching the covers
1. Insert, arrows 1, press down, arrows 2, and
push in, arrow 3 engine compartment
cover. Turn screws clockwise to tighten.

Only add engine oil when the message is dis‐
played in the instrument cluster. The quantity
to be added is indicated in the message dis‐
played in the instrument cluster.
2. Insert insulation.
3. Insert cargo cover, and turn screws clock‐
wise to tighten.

Engine oil types to add
Hints

Adding engine oil
General information
Switch off operating readiness and safely park
the vehicle before engine oil is added.

Hints
Adding engine oil
Add oil within the next 125 miles/200 km;
otherwise, this may cause engine damage.◀
Do not add too much engine oil
When too much engine oil is added, im‐
mediately have the vehicle checked, otherwise,
this may cause engine damage.◀
Protect children
Keep oil, grease, etc., out of reach of chil‐
dren and observe the warnings on the contain‐
ers to prevent health risks.◀

Oil filler neck
The oil filler neck is located in the engine com‐
partment. Engine compartment access, refer
to page 174.

No oil additives
Oil additives may lead to engine dam‐
age.◀
Viscosity grades for engine oils
When selecting an engine oil, ensure that
the engine oil belongs to one of the viscosity
grades SAE 0W-40, SAE 0W-30, SAE 5W-40,
and SAE 5W-30 or malfunctions or engine
damage may occur.◀
The engine oil quality is critical for the life of
the engine.

Suitable engine oil types
You can add engine oils that meet the follow‐
ing oil rating standards:
Gasoline engine
BMW Longlife-01.
BMW Longlife-01 FE.
Further information regarding the oil specifica‐
tions and viscosities of engine oils can be in‐
quired with the service center.

Online Edition for Part no. 01 40 2 960 891 - II/15

175

Mobility

Engine oil

Alternative engine oil types
If an engine oil suitable for continuous use is
not available, up to 1 US quart/liter of an en‐
gine oil with the following oil rating can be
added:
Gasoline engine
API SM or superior oil rating.

Engine oil change:
The vehicle manufacturer recommends that
you let the service center change the motor oil.

176

Online Edition for Part no. 01 40 2 960 891 - II/15

Coolant

Mobility

Coolant
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Coolant level
If necessary, have the service center check the
coolant level and add coolant as needed.

Online Edition for Part no. 01 40 2 960 891 - II/15

177

Mobility

Maintenance

Maintenance
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

BMW maintenance system
The maintenance system indicates required
maintenance measures, and thereby provides
support in maintaining road safety and the op‐
erational reliability of the vehicle.
In some cases scopes and intervals may vary
according to the country-specific version. Re‐
placement work, spare parts, fuels and lubri‐
cants and wear materials are calculated sepa‐
rately. Additional information is available from
the service center.

Condition Based Service
CBS
Sensors and special algorithms take into ac‐
count the driving conditions of your vehicle.
Based on this, Condition Based Service recog‐
nizes the maintenance requirements.
The system makes it possible to adapt the
amount of maintenance corresponding to your
user profile.
Detailed information on service requirements,
refer to page 84, can be displayed on the Con‐
trol Display.

Service data in the remote control
Information on the required maintenance is
continuously stored in the remote control.
Your service center will read out this data and
suggest the right array of service procedures
for your vehicle.
Therefore, hand your service specialist the re‐
mote control with which the vehicle was driven
most recently.

Storage periods

Note
Maintenance and repairs
Have maintenance and repair work per‐
formed only by a service center or a workshop
that works according to BMW specifications
with appropriately trained personnel. Other‐
wise, there is the risk of fatal injury from elec‐
trocution due to the high-voltage system's
high voltage.◀

178

Storage periods during which the vehicle bat‐
tery was disconnected are not taken into ac‐
count.
If this occurs, have a service center update the
time-dependent maintenance procedures,
such as checking brake fluid and, if needed,
changing the engine oil and the microfilter/
activated-charcoal filter.

Online Edition for Part no. 01 40 2 960 891 - II/15

Maintenance

Service and Warranty
Information Booklet for US
models and Warranty and
Service Guide Booklet for
Canadian models
Please consult your Service and Warranty In‐
formation Booklet for US models and Warranty
and Service Guide Booklet for Canadian mod‐
els for additional information on service re‐
quirements.
Maintenance and repair should be performed
by your service center. Make sure to have reg‐
ular maintenance procedures recorded in the
vehicle's Service and Warranty Information
Booklet for US models, and in the Warranty
and Service Guide Booklet for Canadian mod‐
els. These entries are proof of regular mainte‐
nance.

Socket for OBD Onboard
Diagnosis
Note
Socket for Onboard Diagnosis
The socket for onboard diagnostics may
only be used by the service center or a work‐
shop that operates in accordance with the
specifications of the vehicle manufacturer with
correspondingly trained personnel and other
authorized persons. Otherwise, use may result
in operating problems for the vehicle.◀

Mobility

Position

There is an OBD socket on the driver's side for
checking the primary components in the vehi‐
cle's emissions.

Emissions
▷ The warning lamp lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as
possible.
▷ The warning lamp flashes under certain
circumstances:
This indicates that there is excessive mis‐
firing in the engine.
Reduce the vehicle speed and have the
system checked immediately; otherwise,
serious engine misfiring within a brief pe‐
riod can seriously damage emission con‐
trol components, in particular the catalytic
converter.

Online Edition for Part no. 01 40 2 960 891 - II/15

179

Mobility

Replacing components

Replacing components
Vehicle features and options

4. Remove the wiper blade toward one side.

This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Wiper blade replacement

5. Insert the new wiper blade in reverse order
of removal until it locks in place.
6. Fold down the wipers.

Hints
Do not fold down the wipers without
wiper blades
Do not fold down the wipers if wiper blades
have not been installed; this may damage the
windshield.◀

Replacing the wiper blades
1. To change the wiper blades, fold up, refer
to page 70, the wiper arms.
2. Fold up the wipers.

Lamp and bulb replacement
General information
All headlights and lights are made using LED
or laser technology. Contact your service cen‐
ter in the event of a malfunction.

Headlight glass
Condensation can form on the inside of the ex‐
ternal lights in cool or humid weather. When
driving with the light switched on, the conden‐
sation evaporates after a short time. The head‐
light glass does not need to be changed.
If the headlights do not dim despite driving
with the light switched on, increasing humidity
forms, e. g. water droplets in the light, have the
service center check this.

Light-emitting diodes (LEDs)
3. Position the wiper blade in a horizontal po‐
sition.

Some items of equipment use light-emitting
diodes installed behind a cover as a light
source.
These light-emitting diodes, which are related
to conventional lasers, are officially designated
as Class 1 light-emitting diodes.

180

Online Edition for Part no. 01 40 2 960 891 - II/15

Replacing components

Mobility

Vehicle battery

Hints
Do not perform any work on the lighting
system
Have any work on the lighting system, includ‐
ing bulb replacement, performed only by a
service center. Due to the high voltage present
in the system, there is a danger of fatal injuries
if work is carried out improperly.◀
Irritation of the retina
Never look directly into the headlights or
their light sources for a lengthy period of time,
otherwise this could irritate your retinas.◀
Do not remove the covers
Do not remove the covers, and never
stare into the unfiltered light for several hours;
otherwise, irritation of the retina could result.◀

Changing wheels
Hints
When sealants are used, an immediate wheel
change when there is a loss of tire inflation
pressure in the event of a flat tire is unneces‐
sary.
Which is why no spare tire is available.

The vehicle battery has 12 volts. The battery
supplies the onboard electronics with energy.
Information about the high-voltage system, re‐
fer to page 150.

Maintenance
The battery is maintenance-free.
The added amount of acid is sufficient for the
service life of the battery.
Further information about the battery can be
obtained from your service center.

Battery replacement
Use approved vehicle batteries only
Only use vehicle batteries that have been
approved for your vehicle by the manufacturer;
otherwise, the vehicle could be damaged and
systems or functions may not be fully availa‐
ble.◀
After a battery replacement, have the battery
registered on the vehicle by the service center
to ensure that all comfort features are fully
available and that any Check Control mes‐
sages of these comfort features are no longer
displayed.

The tools for changing wheels are available as
accessories from your service center.

Charge vehicle battery

Jacking points for the vehicle jack

Do not charge the vehicle battery with an
external charging device; otherwise, there is a
risk of property damage, e. g., to the vehicle's
electronics.◀

Do not use any charging devices

Charging a discharged battery, refer to
page 156.

Power failure

The jacking points for the vehicle jack are lo‐
cated at the positions shown.

After a temporary power loss, some equipment
needs to be newly initialized or individual set‐
tings updated, e. g.:
▷ Time: update.

Online Edition for Part no. 01 40 2 960 891 - II/15

181

Mobility

Replacing components

▷ Date: update.

Disposing of old batteries
Have old batteries disposed of by your
service center or bring them to a recy‐
cling center.
Maintain the battery in an upright position for
transport and storage. Secure the battery so
that it does not tip over during transport.

Fuses
Hints
Replacing fuses
Never attempt to repair a blown fuse and
do not replace a defective fuse with a substi‐
tute of another color or amperage rating; this
could lead to a circuit overload, ultimately re‐
sulting in a fire in the vehicle.◀

Replacing fuse
The fuses are located in the passenger foot‐
well under the dashboard.
1. To open, loosen screws, arrow 1.

2. Remove cover, arrow 2.
Information on the fuse types and locations
is found on a separate sheet.
3. Replace the fuse in question.
4. The installation is done in reverse order
from the removal.

182

Online Edition for Part no. 01 40 2 960 891 - II/15

Breakdown assistance

Mobility

Breakdown assistance
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Hints
Emergency Request not guaranteed
For technical reasons, the Emergency
Request cannot be guaranteed under unfavor‐
able conditions.◀

Overview

Hazard warning flashers

SOS button in the roofliner

Requirements
▷ The SIM card integrated in the vehicle has
been activated.
The button is located in the center console.

▷ The radio-ready state is switched on.
▷ The Assist system is functional.

Intelligent Emergency
Request

1. Press the cover briefly to open it.

The concept

2. Press the SOS button until the LED at the
button lights up green.

In case of an emergency, an Emergency Re‐
quest can be made through this system.

▷ The LED lights up green: an Emergency
Request was initiated.

General information
Only press the SOS button in an emergency.

Initiating an Emergency Request

If a cancel prompt appears on the display,
the Emergency Request can be aborted.
If the situation allows, wait in your vehicle
until the voice connection has been estab‐
lished.
▷ The LED flashes green when a connection
to the BMW Response Center has been
established.

Online Edition for Part no. 01 40 2 960 891 - II/15

183

Mobility

Breakdown assistance

When the emergency request is received
at the BMW Response Center, the BMW
Response Center contacts you and takes
further steps to help you.
Even if you are unable to respond, the
BMW Response Center can take further
steps to help you under certain circum‐
stances.
For this, data are transmitted to the BMW
Response Center which serve to deter‐
mine the necessary rescue measures. E. g.
the current position of the vehicle, if it can
be established.

First aid kit
Note
Some of the articles have a limited service life.
Check the expiration dates of the contents
regularly and replace any expired items
promptly.

Storage

▷ If the LED is flashing green, but the BMW
Response Center can no longer be heard
via the speaker, you can nevertheless still
be heard at the BMW Response Center.

Initiating an Emergency Request
automatically
Under certain conditions, an Emergency Re‐
quest is automatically initiated immediately af‐
ter a severe accident. Automatic Collision Noti‐
fication is not affected by pressing the SOS
button.

Warning triangle

The first aid kit is located in the trunk, behind
the folding cover on the left side.

Jump-starting
Not jumping or directly charging the ve‐
hicle battery
Do not jump or directly charge the vehicle bat‐
tery using conventional jump starting; other‐
wise, because of the high voltage of the drive
system, there is a danger of fatal injury from
electrocution.◀
If the high-voltage battery and the vehicle bat‐
tery are discharged, it is not possible to oper‐
ate the vehicle. In this case, do not give a jump
start, but instead charge the battery as usual
using the charging cable, refer to page 156.

The warning triangle is located in the bottom
of the trunk.
Release the Velcro® fastener to remove it.

184

Online Edition for Part no. 01 40 2 960 891 - II/15

Breakdown assistance

Mobility

Tow-starting and towing

In order to ensure that the vehicle can roll, pro‐
ceed as follows:

Transporting your vehicle

1. Switch on drive readiness, refer to
page 61.

Note
Your vehicle is not permitted to be towed.
Therefore, contact a service center in the
event of a breakdown.
Do not have the vehicle towed
Have your vehicle transported on a load‐
ing platform only; otherwise, damage may oc‐
cur.◀

Tow truck

2. Depress brake pedal.
3. Engage selector lever position N.
If there are electrical malfunctions, it may hap‐
pen that you can't change the selector lever
position.

Towing other vehicles
The tow-starting or towing of other vehicles
with the BMW i8 is not possible.

Tow fitting
The screw-in tow fitting should always be car‐
ried in the vehicle.
The tow fitting can be screwed in at the front
of your BMW.

The vehicle should only be transported on a
loading platform.
Do not lift the vehicle
Do not lift the vehicle by the tow fitting or
body and chassis parts; otherwise, damage
may result.◀

The tow fitting is located under the first aid kit
behind the left folding cover in the trunk.

Use tow fitting located in the front only for po‐
sitioning the vehicle.

Tow fitting, information on use

Pushing vehicle

▷ Use only the tow fitting provided with
the vehicle and screw it all the way in.

To remove a disabled vehicle from the danger
area, push it for a short distance at a speed of
no more than 6 mph/10 km/h.
The vehicle can only be pushed in selector
lever position N.

▷ Use the tow fitting for towing on paved
roads only.
▷ Use tow fitting located in the front only for
positioning the vehicle.
▷ Avoid lateral loading of the tow fitting, e.g.,
do not lift the vehicle by the tow fitting.
Otherwise, damage to the tow fitting and the
vehicle can occur.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

185

Mobility

Breakdown assistance

Screw thread for tow fitting

▷ Secure the crash site.
▷ Immediately notify rescue forces, police, or
firefighters of the fact that your vehicle is
equipped with a high-voltage system.
▷ Engage selector lever position P, apply the
parking brake, and reel off the ignition or
deactivate drive readiness.
▷ Lock the vehicle after exiting.

Press on the mark on the edge of the cover to
push it out.

▷ Do not inhale any gases esliding from the
high-voltage battery; if needed, maintain a
safe distance from the vehicle.

Tow-starting
Steptronic transmission
Do not tow-start the vehicle.
Tow-starting the engine is not possible due to
the Steptronic transmission.
Have the cause of the starting problems fixed.

What to do after an accident
Hints
After an accident
After an accident, do not touch any highvoltage components such as orange colored
high-voltage cables or parts that are in contact
with exposed high-voltage cables. Otherwise,
there is the risk of fatal injury from electrocu‐
tion due to the system's high voltage.◀
Esliding fluids
Do not touch any fluids esliding from the
high-voltage battery, or the skin can sustain
chemical burns.◀

General information
If you are involved in an accident with your ve‐
hicle, compliance with the following additional
safety precautions is required with regard to
the high-voltage system:
186

Online Edition for Part no. 01 40 2 960 891 - II/15

Care

Mobility

Care
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Car washes

Cleaning sensors/camera lenses with
high-pressure washers
When using high-pressure washers, do not
spray the sensors and camera lenses on the
outside of the vehicle for long periods and
maintain a distance of at least 12 in/30 cm.◀
Have the charging port cleaned by
trained personnel
If the charging port is dirty, have the car
cleaned only by appropriately trained person‐
nel. Otherwise, there is a danger of injury from
high voltage.◀

General information

Automatic car washes

Regularly remove foreign objects, e.g. leaves,
from the air outlet grills in the hood.

Hints

Wash your vehicle frequently, particularly in
winter. Intense soiling and road salt can dam‐
age the vehicle.

Hints
Closing the charging port flap
Close the charging port flap while wash‐
ing the vehicle. Otherwise, the vehicle could be
damaged.◀
Steam jets or high-pressure washers
When using steam jets or high-pressure
washers, hold them a sufficient distance away
and use a maximum temperature of
140 ℉/60 ℃.
Ensure that a distance of at least 31.5 in‐
ches/80 cm from the charging port flap is
maintained. Holding them too close or using
excessively high pressures or temperatures
can cause damage or preliminary damage that
may then lead to long-term damage.

▷ Give preference to cloth car washes or
those that use soft brushes in order to
avoid paint damage.
▷ Make sure that the wheels and tires are not
damaged by the transport mechanisms.
▷ Fold in the exterior mirrors; otherwise, they
may be damaged, depending on the width
of the vehicle.
▷ Deactivate the rain sensor, refer to
page 69, to avoid unintentional wiper acti‐
vation.
▷ In some cases, an unintentional alarm can
be triggered by the interior motion sensor
of the alarm system. Follow the instruc‐
tions on avoiding an unintentional alarm,
refer to page 48.
Guide rails in car washes
Avoid car washes with guide rails higher
than 4 in/10 cm; otherwise, the vehicle body
could be damaged.◀

Follow the user's manual for the high-pressure
washer.◀

Online Edition for Part no. 01 40 2 960 891 - II/15

187

Mobility

Care

Before driving into a car wash

Vehicle care

In order to ensure that the vehicle can roll in a
car wash, take the following steps:

Car care products

1. Drive into the car wash.
2. Engage selector lever position N.
3. Press the Start/Stop button.
In this way, operating readiness remains
switched on, and a Check-Control mes‐
sage is displayed.
To activate drive readiness:
1. Depress the brake pedal.
2. Press the Start/Stop button.
Pressing the Start/Stop button without step‐
ping on the brake turns operating readiness
off.

Selector lever position
Selector lever position P is engaged automati‐
cally:
▷ With operating readiness turned off.
▷ After approx. 15 minutes.

Headlights
▷ Do not rub dry and do not use abrasive or
acidic cleansers.
▷ Soak areas that have been dirtied e. g.,
from insects, with shampoo and wash off
with water.
▷ Thaw ice with de-icing spray; do not use an
ice scraper.

After washing the vehicle
After washing the vehicle, apply the brakes
briefly to dry them; otherwise, braking action
can be reduced and corrosion of the brake
discs can occur.
Completely remove all residues on the win‐
dows, to minimize loss of visibility due to
smearing and to reduce wiper noises and
wiper blade wear.

188

BMW recommends using care and cleaning
products from BMW, since these have been
tested and approved.
Car care and cleaning products
Follow the instructions on the container.
When cleaning the interior, open the doors or
windows.
Only use products intended for cleaning vehi‐
cles.
Cleansers can contain substances that are
dangerous and harmful to your health.◀

Vehicle paint
Regular care contributes to driving safety and
value retention. Environmental influences in
areas with elevated air pollution or natural con‐
taminants, such as tree resin or pollen can af‐
fect the vehicle's paintwork. Tailor the fre‐
quency and extent of your car care to these
influences.
Aggressive substances such as spilled fuel, oil,
grease or bird droppings, must be removed im‐
mediately to prevent the finish from being al‐
tered or discolored.

Leather care
Remove dust from the leather often, using a
cloth or vacuum cleaner.
Otherwise, particles of dust and road grime
chafe in pores and folds, and lead to increased
wear and premature degradation of the leather
surface.
To guard against discoloration, such as from
clothing, provide leather care roughly every
two months.
Clean light-colored leather more frequently be‐
cause soiling on such surfaces is substantially
more visible.

Online Edition for Part no. 01 40 2 960 891 - II/15

Care

Mobility

Use leather care products; otherwise, dirt and
grease will gradually break down the protective
layer of the leather surface.

When cleaning rubber seals, do not use any
silicon-containing car care products in order to
avoid damage or noises.

Suitable care products are available from the
service center.

Plastic components
These include:

Upholstery material care

▷ Imitation leather surfaces.

Vacuum regularly with a vacuum cleaner.

▷ Roofliner.

If upholstery is very dirty, e.g., with beverage
stains, use a soft sponge or microfiber cloth
with a suitable interior cleaner.

▷ Lamp lenses.

Clean the upholstery down to the seams using
large sweeping motions. Avoid rubbing the
material vigorously.
Damage from Velcro® fasteners

▷ Instrument cluster cover.
▷ Matt black spray-coated components.
▷ Painted parts in the interior.
▷ Carbon parts in the interior.
Clean with a microfiber cloth.

Open Velcro® fasteners on pants or
other articles of clothing can damage the seat
covers. Ensure that any Velcro® fasteners are
closed.◀

Dampen cloth lightly with water.

Caring for special components

Do not use cleansers that contain alcohol or
solvents, such as lacquer thinners, heavy-duty
grease removers, fuel, or such; this could lead
to surface damage.◀

Light-alloy wheels
When cleaning the vehicle, use only neutral
wheel cleaners having a pH value from 5 to 9.
Do not use abrasive cleaning agents or steam
jets above 140 ℉/60 ℃. Follow the manufac‐
turer's instructions.
Aggressive, acidic or alkaline cleaning agents
can destroy the protective layer of adjacent
components, such as the brake disk.

Chrome surfaces
Carefully clean components such as the radia‐
tor grille or door handles with an ample supply
of water, possibly with shampoo added, partic‐
ularly when they have been exposed to road
salt.

Rubber components
Aside from water, treat only with rubber
cleansers.

Do not soak the roofliner.
No cleansers that contain alcohol or sol‐
vents

Safety belts
Dirty belt straps impede the reeling action and
thus have a negative impact on safety.
Chemical cleaning
Do not clean chemically; this can destroy
the webbing.◀
Use only a mild soapy solution, with the safety
belts clipped into their buckles.
Do not allow the reels to retract the safety
belts until they are dry.

Carpets and floor mats
No objects in the area around the pedals
Keep floor mats, carpets, and any other
objects out of the pedal area; otherwise, the
function of the pedals could be impeded while
driving and create the risk of an accident.

Online Edition for Part no. 01 40 2 960 891 - II/15

189

Mobility

Care

Do not place additional floor mats over existing
mats or other objects.
Only use floor mats that have been approved
for the vehicle and can be properly attached to
floor.
Ensure that the floor mats are securely fas‐
tened again after they were removed for clean‐
ing, e.g.◀
Floor mats can be removed from the car's inte‐
rior for cleaning.
If the floor carpets are very dirty, clean with a
microfiber cloth and water or a textile cleaner.
To prevent matting of the carpet, rub back and
forth in the direction of travel only.

Sensor/camera lenses
To clean sensors and camera lenses, use a
cloth moistened with a small amount of glass
detergent.

sure that the high-voltage battery is fully
charged. For longer idle times, park the vehicle
with a charging plug plugged into a suitable
power source. Regularly check charging state.
Otherwise, the high-voltage battery can be
damaged when there is excessive discharge.◀
For idle phases that last several weeks, park
the vehicle with a fully charged battery if possi‐
ble.
Do not park the vehicle for longer than 14 days
if the electric range is less than 6 mls, approx.
10 km.
With storage times of up to three months, if
possible plug the vehicle into a suitable power
source or park it in a nearly fully charged state.

Note
The service center can advise you on what to
consider when storing the vehicle for longer
than three months.

Displays/monitors
Cleaning displays and screens
Do not use any chemical or household
cleaning agents; otherwise, surfaces can be af‐
fected.◀
Keeping out moisture
Keep all fluids and moisture away from
the unit; otherwise, electrical components can
be damaged.◀
Avoid pressure
Avoid pressing too hard when cleaning
and do not use abrasive materials; otherwise,
damage can result.◀
Clean with a clean, antistatic microfiber cloth.

Long idle times and long-term vehicle
storage
Do not allow the vehicle to sit idle for ex‐
tended periods with a low charging state
Before storing the vehicle for an extended pe‐
riod, check the battery charge indicator to en‐
190

Online Edition for Part no. 01 40 2 960 891 - II/15

Care

Online Edition for Part no. 01 40 2 960 891 - II/15

Mobility

191

Online Edition for Part no. 01 40 2 960 891 - II/15

Reference
This chapter contains the technical data and an
index that will quickly take you to the information
you need.

Online Edition for Part no. 01 40 2 960 891 - II/15

Reference

Technical data

Technical data
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to

the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Note
The technical data and specifications in this
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
for example, due to the selected special equip‐
ment, country version or country-specific
measurement method. Detailed values can be

found in the approval documents, on informa‐
tion signs on the vehicle or can be obtained
from the service center.
The information in the vehicle documents al‐
ways has priority.

Dimensions
The dimensions can vary depending on the
model version, equipment or country-specific
measurement method.

roof racks or spoiler. The heights can deviate,
for example, due to the selected special equip‐
ment, tires, load and chassis version.

The specified heights do not take into account
attached parts, for example, a roof antenna,
BMW i8
Width with mirrors

inches/mm

87.3/2,218

Width without mirrors

inches/mm

76.5/1,942

Height

inches/mm

50.8/1,291

Length

inches/mm

184.9/4,697

Wheelbase

inches/mm

110.2/2,800

Smallest turning radius diam.

ft/m

40.4/12.3

194

Online Edition for Part no. 01 40 2 960 891 - II/15

Technical data

Reference

Weights
BMW i8
Approved gross vehicle weight

lbs/kg

4,090/1,855

Load

lbs/kg

620/281

Approved front axle load

lbs/kg

1,975/896

Approved rear axle load

lbs/kg

2,195/996

Cargo area capacity

cu ft/l

4.7/154

Capacities
US gal/liters
Fuel tank, approx.

11.1/42

Online Edition for Part no. 01 40 2 960 891 - II/15

195

Reference

Appendix

Appendix
Any updates to the Owner's Handbook for Ve‐
hicle are listed here.

196

Online Edition for Part no. 01 40 2 960 891 - II/15

Appendix

Online Edition for Part no. 01 40 2 960 891 - II/15

Reference

197

Reference

Everything from A to Z

Everything from A to Z
Index
A
ABS, Antilock Brake Sys‐
tem 109
Acceleration Assistant, refer
to Launch Control 73
Accessories and parts 7
Acoustic pedestrian protec‐
tion 65
AC quick charging cable, see
Level 2 charging cable 152
Activated-charcoal filter 127
Activate drive readiness 63
Adapting to the course of the
road, hybrid system 79
Adaptive brake lights, refer to
Brake force display 108
Additives, oil 175
Adjustments, seats/head re‐
straints 51
Adjustments, steering
wheel 56
Advance climate control, refer
to Stationary climate con‐
trol 127
After washing vehicle 188
Airbags 96
Airbags, indicator/warning
light 97
Air circulation, refer to Recir‐
culated-air mode 125
Air, dehumidifying, refer to
Cooling function 125
Air distribution, manual 126
Air flow, automatic climate
control 126
Air pressure, tires 163
Air vents, refer to Ventila‐
tion 127
Alarm system 47
Alarm, unintentional 48
198

All around the center con‐
sole 16
All around the roofliner 17
All around the steering
wheel 14
All-season tires, refer to Win‐
ter tires 168
Alternating-code hand-held
transmitter 130
Alternative oil types 176
Ambient light 95
Antifreeze, washer fluid 70
Antilock Brake System,
ABS 109
Anti-slip control, refer to
DSC 109
Approved axle load 195
Approved engine oils, see
Suitable engine oil
types 175
Arrival time 88
Artificial engine noise 65
Assistance for the combus‐
tion engine 65
Assistance when driving
off 112
ASSIST, Hybrid system 65
Assist system, refer to Intelli‐
gent Safety 102
AUTO intensity 126
Automatic car wash 187
Automatic climate con‐
trol 124
Automatic Curb Monitor 54
Automatic deactivation, frontseat passenger airbags 98
Automatic deactivation of the
high-voltage system 34
Automatic headlight con‐
trol 93
Automatic locking 47

Automatic recirculated-air
control 125
Automatic transmission, see
Steptronic Sport transmis‐
sion 70
AUTO program, automatic cli‐
mate control 126
AUTO program, intensity 126
Average fuel consumption 87
Average speed 88
Axle loads, weights 195

B
Backup charging 156
Band-aids, refer to First aid
kit 184
Battery, 12 volt 181
Battery replacement, vehicle
battery 181
Battery replacement, vehicle
remote control 39
Battery state indicator 77
Battery, vehicle 181
Belts, safety belts 53
BMW Assist 6
BMW eDRIVE 31
BMW Homepage 6
BMW i Driver’s Guide App 6
BMW Internet page 6
BMW maintenance sys‐
tem 178
Body work, see Working on
the vehicle 34
Brake assistant 109
Brake discs, break-in 138
Brake force display 108
Brake lights, adaptive 108
Brake lights, brake force dis‐
play 108
Brake pads, break-in 138

Online Edition for Part no. 01 40 2 960 891 - II/15

Everything from A to Z

Braking, hints 140
Breakdown assistance 183
Break-in 138
Brightness of Control Dis‐
play 90
Bulb replacement 180
Bulbs and lamps 180
Button, Start/Stop 61
Bypassing, refer to Jumpstarting 184

C
California Proposition 65
Warning 8
Camera lenses, care 190
Camera, rearview cam‐
era 118
Camera, Side View 122
Camera, Top View 121
Car battery 181
Car care products 188
Care, displays 190
Care, vehicle 188
Cargo 142
Cargo area 132
Cargo cover 132
Car key, refer to Remote con‐
trol 38
Carpet, care 189
Car wash 187
Catalytic converter, refer to
Hot exhaust system 140
CBS Condition Based Serv‐
ice 178
Center armrest 134
Center console 16
Central locking system 44
Central screen, refer to Con‐
trol Display 18
Changes, technical, refer to
Safety 7
Changing wheels 181
Changing wheels/tires 167
CHARGE, energy recov‐
ery 66

Charging battery, see Vehicle
charging 150
Charging, refer to Charging
vehicle 150
Charging, refer to Vehicle
charging 150
Charging screen 76
Charging state indicator,
high-voltage battery 77
Charging status, see display
of the charging status 154
Charging vehicle 150
Charging vehicle, refer to Ve‐
hicle charging 150
Chassis number, see vehicle
identification number 10
Check Control 79
Checking the engine oil level
electronically 173
Checking the oil level elec‐
tronically 173
Children, seating position 57
Children, transporting
safely 57
Child restraint fixing sys‐
tem 57
Child restraint fixing system
LATCH 58
Child restraint fixing systems,
mounting 57
Child seat, mounting 57
Child seats 57
Chrome parts, care 189
Cleaning displays 190
Climate control 124
Clock 83
Closing/opening via door
lock 43
Closing/opening with remote
control 41
Combination reel, refer to
Turn signals 67
Combination switch, refer to
Wiper system 68
Combustion engine, start‐
ing 63

Reference

Comfort Access 45
COMFORT program, Dy‐
namic Driving Control 111
Compressor 168
Computer, refer to On-board
computer 87
Condensation on win‐
dows 127
Condensation under the vehi‐
cle 141
Condition Based Service
CBS 178
Confirmation signal 47
ConnectedDrive 6
ConnectedDrive Services 6
Connecting electrical devi‐
ces 131
Contact with water, high-volt‐
age system 34
Control Display 18
Control Display, settings 89
Controller 18
Control systems, driving sta‐
bility 109
Convenient opening with the
remote control 42
Coolant 177
Coolant temperature 83
Cooling function 125
Cooling, maximum 125
Cooling system 177
Corrosion on brake discs 141
Cosmetic mirror 131
Courtesy lamps during un‐
locking 41
Courtesy lamps with the vehi‐
cle locked 42
Cruise control 113
Cruising range 83
Current fuel consumption 87

D
Damage, tires 166
Data, technical 194
Date 83

Online Edition for Part no. 01 40 2 960 891 - II/15

199

Reference

Everything from A to Z

Daytime running lights 93
Deactivating drive readi‐
ness 63
Defrosting, refer to Windows,
defrosting 127
Dehumidifying, air 125
Deleting personal data 24
Deletion of personal data 24
Departure times, stationary
climate control 128
Destination distance 88
Digital clock 83
Dimensions 194
Dimmable exterior mirrors 55
Dimmable interior rearview
mirror 55
Direction indicator, refer to
Turn signals 67
Display in windshield 90
Display lighting, refer to In‐
strument lighting 95
Displays 75
Displays, cleaning 190
Displays, hybrid system 77
Disposal, vehicle battery 182
Distance control, refer to
PDC 115
Distance to destination 88
Divided screen view, split
screen 23
Door lock 43
Door lock, refer to Remote
control 38
Drive-off assistant 112
Drive-off assistant, refer to
DSC 109
Driver's door, LED 41
Drive readiness 61
Drive readiness in detail 62
Drive readuness, deacti‐
vate 63
Driving Dynamics Con‐
trol 111
Driving instructions, breakin 138

200

Driving instructions, eDRIVE
drive system 138
Driving mode 111
Driving notes, general 139
Driving stability control sys‐
tems 109
Driving tips 139
Driving with combustion en‐
gine, POWER 65
DSC Dynamic Stability Con‐
trol 109
DTC Dynamic Traction Con‐
trol 110
Dynamic Stability Control
DSC 109
Dynamic Traction Control
DTC 110

E
eBOOST 65
ECO PRO 145
ECO PRO display 145
ECO PRO driving mode 145
ECO PRO mode 145
ECO PRO Tip - driving in‐
struction 146
eDRIVE drive system, driving
instructions 138
eDRIVE, electric driving, see
BMW eDRIVE 32
eDrive system, at a glance 31
EfficientDynamics 146
Electric drive readiness, Si‐
lent Start 63
Electric driving, ePOWER 64
Electric driving, max
eDRIVE 64
Electric driving, see BMW
eDRIVE 32
Electronic oil measure‐
ment 173
Electronic Stability Program
ESP, refer to DSC 109
Emergency charging, refer to
Backup charging 156

Emergency detection, remote
control 39
Emergency release, fuel filler
flap 159
Emergency Request 183
Emergency start function, en‐
gine start 39
Emergency unlocking, tail‐
gate 45
Emergency unlocking, trans‐
mission lock 73
Energy Control 87
Energy recovery,
CHARGE 66
Engine coolant 177
Engine noise, artificial 65
Engine oil 173
Engine oil, adding 175
Engine oil additives 175
Engine oil change 176
Engine oil filler neck 175
Engine oil temperature 83
Engine oil types, alterna‐
tive 176
Engine oil types, ap‐
proved 175
Engine start during malfunc‐
tion 39
Engine start, jump-start‐
ing 184
Engine temperature 83
Entering a car wash 187
ePOWER, electric driving 64
Equipment, interior 129
Error displays, see Check
Control 79
ESP Electronic Stability Pro‐
gram, refer to DSC 109
Exchanging wheels/tires 167
Exhaust system 140
Exterior mirror, automatic
dimming feature 55
Exterior mirrors 54
External start 184
External temperature dis‐
play 83

Online Edition for Part no. 01 40 2 960 891 - II/15

Everything from A to Z

External temperature warn‐
ing 83

F
Failure message, see Check
Control 79
False alarm, refer to Uninten‐
tional alarm 48
Fan, refer to Air flow 126
Filler neck for engine oil 175
First aid kit 184
Fitting for towing, see Tow fit‐
ting 185
Flat tire, changing
wheels 181
Flat tire, Tire Pressure Moni‐
tor TPM 99
Flat tire, warning lamp 100
Flooding 140
Floor carpet, care 189
Floor mats, care 189
Fold-out position, wiper 70
Foot brake 140
Front airbags 96
Front armrest 134
Front beverage holder, front
cup holder 135
Front bottle holder, refer to
Front cup holder 135
Front can holder, refer to
Front cup holder 135
Front cup holder 135
Front-end collision warning
with City Braking func‐
tion 103
Front holder for bever‐
ages 135
front-seat passenger airbags,
automatic deactivation 98
Front-seat passenger airbags,
indicator lamp 98
Fuel 161
Fuel consumption, current 87

Fuel consumption, refer to
Average fuel consump‐
tion 87
Fuel filler flap 158
Fuel gauge 82
Fuel lid 158
Fuel quality 161
Fuel recommendation 161
Fuel, tank capacity 195
Fuse 182

G
Garage door opener, refer to
Universal Integrated Remote
Control 129
Gasoline 161
Gear change, Steptronic
Sport transmission 71
Gear shift indicator 85
Gearshift, see Steptronic
Sport transmission 70
General driving notes 139
Glare shield 131
Glove compartment 134
GPS location, vehicle posi‐
tion 90
Gross vehicle weight, ap‐
proved 195

H
Handbrake, refer to parking
brake 66
Hand-held transmitter, alter‐
nating code 130
Hazard warning flashers 183
Head airbags 96
Headlight control, auto‐
matic 93
Headlight courtesy delay fea‐
ture 92
Headlight courtesy delay fea‐
ture, remote control 47
Headlight courtesy delay fea‐
ture via remote control 42

Reference

Headlight flasher 68
Headlight glass 180
Headlights, care 188
Head restraints 51
Head restraints, front 54
Head-up Display 90
Head-up Display, care 190
Heavy cargo, stowing 143
Height, vehicle 194
High-beam Assistant 94
High beams 68
High beams/low beams, refer
to High-beam Assistant 94
High-voltage battery, charg‐
ing state indicator 77
High-voltage battery, dis‐
charge 139
High-voltage system, auto‐
matic deactivation 34
High-voltage system, contact
with water 34
High-voltage system,
safety 34
Hills 141
Hill start assistant, refer to
Drive-off assistant 112
Hints 6
Homepage 6
Hood 44
Horn 14
Hot exhaust system 140
HUD Head-up Display 90
Hybrid system, adapting to
the course of the road 79
Hybrid system, displays 77
Hydroplaning 140

I
Ice warning, see External
temperature warning 83
Icy roads, see External tem‐
perature warning 83
Identification marks, tires 164

Online Edition for Part no. 01 40 2 960 891 - II/15

201

Reference

Everything from A to Z

Identification number, see ve‐
hicle identification num‐
ber 10
iDrive 18
Ignition key, refer to Remote
control 38
Increase range 144
Indication of a flat tire 100
Indicator and alarm lamps,
see Check Control 79
Indicator lamp, see Check
Control 79
Individual air distribution 126
Individual settings, refer to
Personal Profile 39
Inflation pressure, tires 163
Info display, refer to OnBoard computer 87
Initialize, Tire Pressure Moni‐
tor TPM 100
Instrument cluster 75
Instrument lighting 95
Integrated key 38
Integrated Owner's Manual in
the vehicle 29
Intelligent Emergency Re‐
quest 183
Intelligent Safety 102
Intensity, AUTO pro‐
gram 126
Interior equipment 129
Interior lights 95
Interior lights during unlock‐
ing 41
Interior lights with the vehicle
locked 42
Interior motion sensor 48
Interior rearview mirror, auto‐
matic dimming feature 55
Interior rearview mirror, man‐
ually dimmable 55
Internet page 6
Interval display, service re‐
quirements 84
Interval mode 69

202

J
Jacking points for the vehicle
jack 181
Joystick, Steptronic Sport
transmission 71
Jump-starting 184
Jump starting, refer to
Backup charging 156

K
Key/remote control 38
Keyless Go, refer to Comfort
Access 45
Key Memory, refer to Per‐
sonal Profile 39
Kickdown, Steptronic Sport
transmission 71
Knee airbag 97

L
Lamp replacement, see Bulb
replacement 180
Language on Control Dis‐
play 90
LATCH child restraint sys‐
tem 58
Launch Control 73
Leather, care 188
LED in the driver's door 41
LEDs, light-emitting di‐
odes 180
Length, vehicle 194
Letters and numbers, enter‐
ing 24
Level 1 Charging 155
Level 1 charging cable 152
Level 2 charging cable 152
Light alloy wheels, care 189
Light-emitting diodes,
LEDs 180
Lighting 92
Lights 92
Light switch 92

Load 143
Loading 142
Lock, door 43
Locking/unlocking via door
lock 43
Locking/unlocking with re‐
mote control 41
Locking, automatic 47
Locking, settings 46
Locking via tailgate 45
Longer idle phases 190
Long idle times and long-term
vehicle storage 190
Long-term vehicle stor‐
age 190
Low beams 92
Low beams, automatic, refer
to High-beam Assistant 94

M
Maintaining charging
state 64
Maintenance 178
Maintenance require‐
ments 178
Maintenance, service require‐
ments 84
Maintenance system,
BMW 178
Make-up mirror 131
Malfunction displays, see
Check Control 79
Manual air distribution 126
Manual air flow 126
Manual mode, transmis‐
sion 72
Manual operation, door
lock 43
Manual operation, exterior
mirrors 54
Manual operation, fuel filler
flap 159
Manual operation, Park Dis‐
tance Control PDC 116

Online Edition for Part no. 01 40 2 960 891 - II/15

Everything from A to Z

Manual operation, rearview
camera 118
Manual operation, Top
View 121
Marking on approved
tires 167
Master key, refer to Remote
control 38
Max eDRIVE, electric driv‐
ing 64
Maximum cooling 125
Maximum speed, display 85
Maximum speed, winter
tires 168
Measure, units of 90
Medical kit 184
Menu, EfficientDynamics 146
Menu in instrument clus‐
ter 86
Menus, operating, iDrive 18
Menus, refer to iDrive operat‐
ing concept 19
Messages, see Check Con‐
trol 79
Microfilter 127
Minimum tread, tires 166
Mirrors 54
Mobile communication devi‐
ces in the vehicle 140
Mobility System 168
Modifications, technical, refer
to Safety 7
Moisture in headlight 180
Monitor, refer to Control Dis‐
play 18
Mounting of child restraint
systems 57
Multifunction steering wheel,
buttons 14
Multimedia 6

N
Navigation 6
Neck restraints, front, refer to
Head restraints 54

Neutral cleaner, see wheel
cleaner 189
New wheels and tires 167

O
OBD Onboard Diagnosis 179
OBD, see OBD Onboard Di‐
agnosis 179
Obstacle marking, rearview
camera 119
Octane rating, refer to Rec‐
ommended fuel grade 161
Odometer 83
Office 6
Oil 173
Oil, adding 175
Oil additives 175
Oil change 176
Oil change interval, service
requirements 84
Oil filler neck 175
Oil types, alternative 176
Oil types, approved 175
Old batteries, disposal 182
On-board computer 87
Onboard monitor, refer to
Control Display 18
Opening/closing via door
lock 43
Opening and closing 38
Opening and closing, without
remote control 43
Opening and closing, with re‐
mote control 41
Operating concept, iDrive 18
Operating readiness 61
Operating readiness off 62
Operating readiness on 61
Optional equipment, standard
equipment 6
Outside air, refer to Auto‐
matic recirculated-air con‐
trol 125
Overheating of engine, refer
to Coolant temperature 83

Reference

P
Paint, vehicle 188
Park Distance Control
PDC 115
Parked car ventilation, refer to
Stationary climate con‐
trol 127
Parked vehicle, condensa‐
tion 141
Parking aid, refer to PDC 115
Parking brake 66
Parking lights 92
Parts and accessories 7
Passenger side mirror, tilting
downward 54
Pathway lines, rearview cam‐
era 119
PDC Park Distance Con‐
trol 115
Pedestrian protection 65
Pedestrian warning with city
braking function 105
Performance Control 111
Personal Profile 39
Personal Profile, exporting
profiles 40
Pinch protection system, win‐
dows 49
Plastic, care 189
POWER, driving with com‐
bustion engine 65
Power failure 181
Power windows 49
Pressure, tire air pres‐
sure 163
Profile, refer to Personal Pro‐
file 39
Programmable memory but‐
tons, iDrive 23
Protective function, win‐
dows 49
Push-and-turn switch, refer to
Controller 18

Online Edition for Part no. 01 40 2 960 891 - II/15

203

Reference

Everything from A to Z

Q
Quick charging cable, see
Level 2 charging cable 152

R
Radiator fluid 177
Radio 6
Radio-operated key, refer to
Remote control 38
Radio ready state 61
Rain sensor 69
Rear beverage holder, rear
cup holder 135
Rear bottle holder, refer to
Rear cup holder 135
Rear can holder, refer to Rear
Cup holder 135
Rear cup holder 135
Rear holder for bever‐
ages 135
Rearview camera 117
Rearview mirror 54
Rear window defroster 127
Recirculated-air filter 127
Recirculated-air mode 125
Recommended fuel
grade 161
Recommended tire
brands 167
Refueling 158
Remaining range 83
Remote control/key 38
Remote control, malfunc‐
tion 43
Remote control, univer‐
sal 129
Replacement fuse 182
Replacing wheels/tires 167
Reporting safety defects 10
RES button, see Cruise con‐
trol 113
Reserve warning, refer to
Range 83

204

Reset, Tire Pressure Monitor
TPM 100
Retreaded tires 167
Roadside parking lights 93
RON recommended fuel
grade 161
Roofliner 17
Rubber components,
care 189

S
Safe braking 140
Safety 7
Safety belt reminder for driv‐
er's seat and front passen‐
ger seat 53
Safety belts 53
Safety belts, care 189
Safety of the high-voltage
system 34
Safety systems, airbags 96
SAVE Battery, maintaining
charging state 64
Screen, refer to Control Dis‐
play 18
Screw thread, see screw
thread for tow fitting, screw
thread for tow fitting 186
Sealant 168
Seat belts, refer to Safety
belts 53
Seat heating, front 52
Seating position for chil‐
dren 57
Seats 51
Selection list in instrument
cluster 86
Selector lever, Steptronic
Sport transmission 71
Sensors, care 190
Service and warranty 8
Service requirements, Condi‐
tion Based Service
CBS 178

Service requirements, dis‐
play 84
Services, ConnectedDrive 6
SET button, see Cruise con‐
trol 113
Settings, locking/unlock‐
ing 46
Settings, mirrors 54
Settings on Control Dis‐
play 89
Shift paddles on the steering
wheel 73
Side airbags 96
Side View 122
Signaling, horn 14
Signals when unlocking 47
Silent Start, electric drive
readiness 63
Sitting safely 51
Size 194
Smallest turning radius 194
Snow chains 171
Socket 131
Socket, OBD Onboard Diag‐
nostics 179
SOS button 183
Spare fuse 182
Specified engine oil
types 175
Speed, average 88
Speed limit detection, onboard computer 88
Speed limiter, display 85
Speed Limit Information 85
Speed warning 88
Split screen 23
Sport program, transmis‐
sion 72
Stability control systems 109
Standard charging cable, see
Level 1 charging cable 152
Standard charging, see Level
1 Charging 155
Standing air conditioning, re‐
mote control 47
Start/Stop button 61

Online Edition for Part no. 01 40 2 960 891 - II/15

Everything from A to Z

Start function during malfunc‐
tion 39
Starting the combustion en‐
gine 63
Stationary climate con‐
trol 127
Status control display,
tires 100
Status information, iDrive 22
Status of Owner's Manual 7
Steering wheel, adjusting 56
Steptronic Sport transmis‐
sion 70
Storage compartments 134
Storage compartments, loca‐
tions 134
Storage, tires 168
Storing the vehicle 190
Suitable engine oils 175
Summer tires, tread 166
Sun visor 131
Supplementary text mes‐
sage 82
Surround View 117
Switch for Dynamic Driv‐
ing 111
Switch, refer to Cockpit 14
Symbols 6
Symbols in the status field 22
SYNC program, automatic cli‐
mate control 125

T
Tachometer 82
Tailgate closing 45
Tailgate, emergency unlock‐
ing 45
Tailgate opening 44
Tailgate via remote con‐
trol 42
Tail lamps, see Bulb replace‐
ment 180
Tank unlocking, refer to Tank
vent 158
Tank vent 158

Technical changes, refer to
Safety 7
Technical data 194
Telephone 6
Temperature, automatic cli‐
mate control 125
Temperature display for ex‐
ternal temperature 83
Temperature, engine oil 83
Text message, supplemen‐
tary 82
Theft alarm system, refer to
Alarm system 47
Tilt alarm sensor 48
Time of arrival 88
Tire damage 166
Tire identification marks 164
Tire inflation pressure 163
Tire Pressure Monitor
TPM 99
Tires, changing 167
Tire sealant 168
Tires, everything on wheels
and tires 163
Tire tread 166
Tone 6
Top View 120
Total range 83
Total vehicle weight 195
Touchpad 21
Tow fitting 185
Towing 185
Tow lug, see Tow fitting 185
Tow-starting 185
TPM Tire Pressure Moni‐
tor 99
Traction control 110
TRACTION, driving dynam‐
ics 110
Transmission lock, electronic
unlocking 73
Transmission, see Steptronic
Sport transmission 70
Transporting children
safely 57
Tread, tires 166

Reference

Trip computer 88
Triple turn signal activa‐
tion 68
Trip odometer 83
Turning circle lines, rearview
camera 119
Turning radius 194
Turn signals, operation 67

U
Unintentional alarm 48
Units of measure 90
Universal remote control 129
Unlock button, Steptronic
Sport transmission 71
Unlocking/locking via door
lock 43
Unlocking/locking with re‐
mote control 41
Unlocking, settings 46
Updates made after the edito‐
rial deadline 7
Upholstery care 189
USB interface 132

V
Vanity mirror 131
Variable light distribution 93
Vehicle battery 181
Vehicle battery, replac‐
ing 181
Vehicle, break-in 138
Vehicle care 188
Vehicle features and op‐
tions 6
Vehicle identification num‐
ber 10
Vehicle jack 181
Vehicle paint 188
Vehicle position, GPS loca‐
tion 90
Vehicle wash 187
Ventilation 127

Online Edition for Part no. 01 40 2 960 891 - II/15

205

Reference

Everything from A to Z

Venting, refer to Stationary
climate control 127
VIN, see vehicle identification
number 10
Voice activation system 26

W
Warning and indicator lamps,
see Check Control 79
Warning displays, see Check
Control 79
Warning messages, see
Check Control 79
Warning triangle 184
Warranty 7
Washer fluid 70
Washer nozzles, wind‐
shield 69
Washer system 68
Washing, vehicle 187
Water, high-voltage sys‐
tem 34
Water on roads 140
Weights 195
Welcome lamps during un‐
locking 41
Welcome lights 92
What to do after an acci‐
dent 186
Wheelbase, vehicle 194
Wheel cleaner 189
Wheels, changing 167
Wheels, everything on wheels
and tires 163
Wheels, Tire Pressure Moni‐
tor TPM 99
Width, vehicle 194
Window defroster, rear 127
Windows, powered 49
Windshield washer fluid 70
Windshield washer noz‐
zles 69
Windshield washer sys‐
tem 68
Windshield wiper 68

206

Winter storage, care 190
Winter tires, suitable
tires 168
Winter tires, tread 166
Wiper 68
Wiper blades, replacing 180
Wiper fluid 70
Wiper, fold-out position 70
Wiper system 68
Word match concept, naviga‐
tion 25
Working on the body, see
Working on the vehicle 34
Working on the high-voltage
system, see Working on the
vehicle 34

Online Edition for Part no. 01 40 2 960 891 - II/15

01 40 2 960 891 ue

*BL296089100F*
Online Edition for Part no. 01 40 2 960 891 - II/15



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2014:10:11 02:48:34+01:00
Creator Tool                    : AH XSL Formatter V6.0 MR3a for Windows : 6.0.4.6312 (2012/07/18 11:00JST)
Modify Date                     : 2015:01:14 17:19:29+01:00
Metadata Date                   : 2015:01:14 17:19:29+01:00
Producer                        : Antenna House PDF Output Library 2.6.0 (Windows)
Trapped                         : False
Format                          : application/pdf
Document ID                     : uuid:1010a25d-5f3d-4a8d-a625-5fa9cfc3f6f1
Instance ID                     : uuid:477ee912-3048-40d5-bdf9-c6ba672fca91
Page Mode                       : UseOutlines
Page Count                      : 224
Creator                         : AH XSL Formatter V6.0 MR3a for Windows : 6.0.4.6312 (2012/07/18 11:00JST)
EXIF Metadata provided by EXIF.tools

Navigation menu