Bommer Builders Hardware Catalog Current BH
User Manual: Bommer Bommer Builders Hardware Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 80
BUILDERS HARDWARE
Catalog Number 134 July 2010
Bommer Industries, Inc.
P.O. Box 187
19810 Asheville Highway
Landrum, South Carolina 29356
www.bommer.com
Regional Warehouse
Western United States
Phone : 800 - 334 - 1654
Fax : 877 - 426 - 0388
Phone : 864 - 457 - 3301
Phone : 800 - 334 - 1654
Fax : 864 - 457 - 2487
Fax : 877 - 426 - 0388
e-mail : hardware@bommer.com
“Over 125 Years of Quality”
“Over 125 Years of Quality” GI-1
Quality and innovation have been Bommer
trademarks since the day in 1876 when we
started in business.
Indeed, it was Lorenz Bommer’s patented
improvement on the single-acting spring
hinge which launched our company.
Four years later, in 1880, Lorenz
Bommer, - together with his sons William
and Anton, - developed the first double
acting spring hinge. This sparked the
creative spirit and drive which have been
primarily responsible for Bommer’s
success.
Through the years,
we have continued
to expand our product
offering: Bommer’s
complete line of
ARCHITECTURAL GRADE HINGES
enhances our comprehensive specialty lines
of SPRING HINGES, PIVOTS, and
LAVATORY HARDWARE.
Bommer’s long-standing devotion to quality,
research, and new product development will
keep Bommer’s architectural grade prod-
ucts at the forefront of specifications for
commercial construction, government
projects, and special industrial applications
worldwide.
Bommer also enjoys a reputation as one
of the oldest existing manufacturers of
Postal Service-approved mailboxes. Those
carrying the Bommer trademark have
become the standard for multiple-dwelling
units such as apartment houses,
condominiums, and dormitories and other
institutional type facilities.
Complementing Bommer’s commitment to
provide the very best in product design and
manufacturing is our sales and service
team: a team whose mission is captured in
five simple words: “Customer satisfaction is
priority one”.
When you want the best in architectural
hardware and postal specialties, specify
Bommer. While other companies are
engaged in the search for excellence, at
Bommer it continues to be an integral part of
our operating philosophy and day-to-day
corporate life.
Catalog Number 134
“Over 125 Years of Quality”
General Information
ARCHITECTURAL FINISH CODE… … … ....................… … .GI-4
FREQUENCY OF DOOR USE … … … ............… .....… … ..GI-5
HANDING OF HINGES… … … … … … … ............… ......… … GI-8
HINGE SELECTION HEIGHT & WIDTH… .................GI-6,7
HINGE SELECTION WEIGHT … … … … … ....................… GI-5
NUMERICAL INDEX… … … … … … … … ............… … ...… GI-3
PRODUCT COMPARISON CHART… … ............… GI-9,10,11,12
SWAGING INFORMATION … … … … .........… … ....… … GI-8
Architectural Grade Hinges
ANCHOR PIVOTS… … … … … … … … .....................… ...… AH-25
BALL BEARINGS … … … … … … … … … ................… … .. AH-1
DECORATIVE HINGE TIPS … … … … … ..................… … AH-4
ELECTRIC HINGE CONNECTORS ........................… AH-21
HINGES 5 KNUCKLE PLAIN BEARING
Full Mortise … … … … … … … … … … … … .............… … AH-6
Half Mortise … … … … … … … … … … … … .................… . AH-22
Half Surface … … … … … … … … … … … .… ..............… . AH-26
Slip In … … … … … … … … … … … … … … .....… .............. AH-16
Wide Throw … … … … … … … … … … … … ...............… . AH-10
HINGES 5 KNUCKLE BALL BEARING
Anchor … … … … … … … … … … … … … … ............... AH-14
Electric … … … … … … … … … … … … … ..............… AH-17,19
Full Mortise … … … … … … … … … … … … .................… AH-7,9
Full Surface … … … … … … … … … … … … ..........… AH-24
Half Mortise … … … … … … … … … … … ..… ........… . AH-22,23
Half Surface … … … … … … … … … … … … ...........… . AH-27,28
Raised Barrel … … … … … … … … … ..… … ...............… AH-15
Slip In … … … … … … … … … … … … … … ...............… AH-16
Swing Clear … … … … … … … … … … … ............… AH-13,23,25,28
Wide Throw … … … … … … … … … … ................… ..… AH-11,12
HINGES 5 KNUCKLE LUBE BEARING
Full Mortise … … … … … … … … … … … ..............… ..… … AH-8
HINGES 3 KNUCKLE PLAIN BEARING
Full Mortise … … … … … … … … … … … .… .............… .… AH-6
Half Mortise … … … … … … … … … .… … … … ................. AH-22
Half Surface … … … … … … … … … … … … … ................ AH-26
Slip In … … … … … … … … … … … ..… … … … ................... AH-16
Wide Throw … … … … … … … … … ..… … ...............… … . AH-10
HINGES 3 KNUCKLE LUBE BEARING
Anchor … … … … … … … … … … … .… … ..… ...........… AH-14
Electric … … … … … … … … … … ..… … … … ...........… AH-18,20
Full Mortise … … … … … … … … … … … … … ...............… AH-7,9
Full Surface … … … … … … … … … .… … ............… . AH-24
Half Mortise … … … … … … … … … ..… … ............... AH-22,23
Half Surface … … … … … … … … … ..… ..… ............ AH-27,28
Raised Barrel … … … … … … … … ..… .… … .............… AH-15
Slip In … … … … … … … … … … … .… … … … .............… AH-16
Swing Clear … … … … … … … … … … … .................… AH-13
Wide Throw … … … … … … … … … … … ..… .............… . AH-11,12
HINGE SERIES … … .......… … … … … … … … .....… … … AH-1
HINGE STYLE … … … .......… … … … … … … .....… … … AH-3
HINGE TYPE … … … … .......… … … … … ..… ........… … AH-2
HOSPITAL TIP … … … … .......… … … … … … … .....… … AH-4
GI-2
Table of Contents
MORTAR BOX for electric hinges … ............… … … ..… AH-21
NUMBERING SYSTEM for ARCHITECTURAL
GRADE HINGES … … … … … … … … … … ............… … . AH-5
PIN OPTIONS … … … … … … … … ...… … … ..............… AH-4
SECURITY OPTIONS … … … … … … .......… … ..........… AH-4
Spring Hinges
DOOR BUMPERS … … … … … … … … … … ......................… SH-17
DOUBLE ACTING HINGE LOCATIONS on DOOR ....... SH-12
HINGE SELECTION MAXIMUM DOOR SIZE … ..... SH-1
INSTALLATION INSTRUCTIONS .......................... SH-2
NFPA LABEL DOOR INFORMATION ........................ SH-1
NUMBERING SYSTEM for SINGLE ACTING
SPRING HINGES … … … … … … .......................… … ....... SH-3
SPRING HINGES DOUBLE ACTING
Clamp-Flange … … … … … … … .....… … .… ...............… ..… SH-15
Classic Tips… … … … … … … … ....… … .................… . SH-13,14,15
Half Surface Type … … … … … ......… … … ........… … … SH-14
Industrial Clamp Flange … … … … … ......… ........… ..… SH-16
Gate Hinge … … … … … … … … … … .....… … .............… . SH-18
Light Duty Louver Door Type … … .......… … … ..........… SH-18
Mortise Type … … … … … … … … … ......… … ..........… … . SH-13
SPRING HINGES SINGLE ACTING
Lube Bearing Spring Hinge … … … ....… … … ..… SH-4,5
Lube Bearing Spring Hinge Special Types … .… SH-6,7
Lube Bearing Spring Hinge Contract Grade ..… SH-8,9
Large Barrel Spring Hinge ..............................… SH-10,11
Large Barrel Spring Hinge with Classic Tips ..… SH-10,11
Specialty Products
AUXILIARY SPRINGS… … ............… … … … … SP-8
LAVATORY HARDWARE
Coat and Hat Hook … … … … ...… … … … ...........… … SP-11
Door Latches and Bolts… … … ...… … … … … ...........… SP-10
Door Pull … … … … … … … … ...… … ...… … ...........… .. SP-11
Door Stop and Keepers … … … ...… ..… … ...........… . SP-12
Door Strikes and Keepers … … ...… … .… ...........… .. SP-12
Emergency Key … … … … … … ...… … … … ...........… . SP-11
Indicators … … .....… … … … … ...… … … ...........… .… . SP-11
Partition Mounting Brackets … … ...… … … .........… . SP-13
Pilaster Cover and Shoe … … … ...… ..… … ...........… SP-13
Spring Hinges … … … … … … … ...… … … … … ...........… SP-14
DOUBLE ACTING PIVOTS
Gravity Pivots … … … … … … … ......… ...… … … ........... SP-7
Horizontal Spring Pivots … … ...........… … … … ..............… SP-1,2
Re Tensioning Instructions … … … … .......… … .....… SP-5
Spring Pivots… … … … … … … … … .......… ............… … SP-3,4,5,6
SCREEN DOOR SPRING HINGES ....................… … SP-8,9
Geared Hinge
CONTINUOUS GEARED HINGE INFORMATION ......… GH-1
FULL MORTISE GEARED HINGES ........................… GH-2
FULL SURFACE GEARED HINGES .......................… GH-3
HALF SURFACE GEARED HINGES ......................… GH-3
PRODUCT CROSS REFERENCE CHART.................… GH-4,5
NUMBERING SYSTEM for GEARED HINGES .................. GH-1
“Over 125 Years of Quality”
Numerical Index
GI-3
01001 SP-14
1001 SP-14
LB1002 SP-14
LB1002H SP-14
LB1006 SP-14
LB1006H SP-14
1011 SP-14
1055 SP-12
1055-P SP-12
1057 SP-12
1057-P SP-12
1070 SP-12
1072 SP-12
1074 SP-12
1075 SP-12
1141 SP-13
1142 SP-13
1514 SH-18
1514-H SH-18
1515 SH-18
1515-H SH-18
15000 SP-10
15001 SP-10
15004 SP-10
15009 SP-10
15009-H SP-10
15015 SP-11
15016 SP-11
15017 SP-11
15019 SP-10
15019-H SP-10
15020 SP-11
15030 SP-11
170 SH-17
175 SH-17
2100 SP-8
2200 SP-8
2400 SP-8
2410 SP-8
2430 SP-8
2440 SP-8
2500 SP-8
2510 SP-8
2520 SP-8
2920 SP-9
2930 SP-9
2960 SP-9
2970 SP-9
2980 SP-9
2990 SP-9
3023 SH-14
CL3023 SH-14
3024 SH-15
CL3024 SH-15
3029 SH-13
CL3029 SH-13
3044 SH-16
4010 SH-10
CL4010 SH-10
4020 SH-10
CL4020 SH-10
4030 SH-11
CL4030 SH-11
4040 SH-11
CL4040 SH-11
LB4310 SH-5
LB4311 SH-5
LB4312 SH-5
LB4310C SH-9
LB4311C SH-9
LB4312C SH-9
LB4313C SH-9
LB4321 SH-7
LB4322 SH-7
LB4333 SH-7
LB4340 SH-7
LB4342 SH-7
LB4350 SH-7
LB4360 SH-7
LB4361 SH-7
LB4362 SH-7
LB4376 SH-7
LB4381 SH-7
LB4382 SH-7
LB4383 SH-7
LB4384 SH-7
LB4390C SH-9
LB4391C SH-9
LB4392C SH-9
5000 AH-6
5001 AH-6
5002 AH-6
BB5000 AH-7
BB5001 AH-7
BB5002 AH-7
BB5004 AH-9
BB5005 AH-9
BB5006 AH-9
LB5000 AH-8
LB5001 AH-8
LB5002 AH-8
LB5004 AH-8
LB5005 AH-8
LB5006 AH-8
5010 AH-10
5011 AH-10
5012 AH-10
BB5010 AH-11
BB5011 AH-11
BB5012 AH-11
BB5014 AH-12
BB5015 AH-12
BB5016 AH-12
BB5020 AH-13
BB5021 AH-13
BB5022 AH-13
BB5024 AH-13
BB5025 AH-13
BB5026 AH-13
BB5034 AH-14
BB5035 AH-14
BB5036 AH-14
BB5040 AH-15
BB5041 AH-15
BB5042 AH-15
BB5044 AH-15
BB5045 AH-15
BB5046 AH-15
5050 AH-16
5051 AH-16
5052 AH-16
BB5050 AH-16
BB5051 AH-16
BB5052 AH-16
MB-1 AH-21
BB5060 AH-17
BB5061 AH-17
BB5062 AH-17
BB5064 AH-19
BB5065 AH-19
BB5066 AH-19
5100 AH-22
5101 AH-22
5102 AH-22
BB5100 AH-22
BB5101 AH-22
BB5102 AH-22
BB5104 AH-23
BB5105 AH-23
BB5106 AH-23
BB5124 AH-23
BB5125 AH-23
BB5126 AH-23
BB5200 AH-24
BB5201 AH-24
BB5202 AH-24
BB5204 AH-24
BB5205 AH-24
BB5206 AH-24
BB5224 AH-25
BB5225 AH-25
BB5226 AH-25
5300 AH-26
5301 AH-26
5302 AH-26
BB5300 AH-27
BB5301 AH-27
BB5302 AH-27
BB5304 AH-28
BB5305 AH-28
BB5306 AH-28
BB5324 AH-28
BB5325 AH-28
BB5326 AH-28
7004 AH-25
7006 AH-25
7012 SP-3
7014 SP-3
7022 SP-3
7112 SP-4
7114 SP-4
7122 SP-4
7211 SP-5
7212 SP-5
7312 SP-6
7313 SP-6
7314 SP-6
7322 SP-6
7411 SP-7
7412 SP-7
7512 SP-7
7512-H SP-7
7514 SP-7
7514-H SP-7
7801 SP-1
7802 SP-1
7805 SP-2
7811 SP-2
7812 SP-2
7813 SP-2
7814 SP-2
7813HD SP-2
7814HD SP-2
7821 SP-2
7822 SP-2
8000 AH-6
8001 AH-6
8002 AH-6
LB8000 AH-7
LB8001 AH-7
LB8002 AH-7
LB8004 AH-9
LB8005 AH-9
LB8006 AH-9
8010 AH-10
8011 AH-10
8012 AH-10
LB8010 AH-11
LB8011 AH-11
LB8012 AH-11
LB8014 AH-12
LB8015 AH-12
LB8016 AH-12
LB8020 AH-13
LB8021 AH-13
LB8022 AH-13
LB8024 AH-13
LB8025 AH-13
LB8026 AH-13
LB8034 AH-14
LB8035 AH-14
LB8036 AH-14
LB8040 AH-15
LB8041 AH-15
LB8042 AH-15
LB8044 AH-15
LB8045 AH-15
LB8046 AH-15
8050 AH-16
8051 AH-16
8052 AH-16
LB8050 AH-16
LB8051 AH-16
LB8052 AH-16
LB8060 AH-18
LB8061 AH-18
LB8062 AH-18
LB8064 AH-20
LB8065 AH-20
LB8066 AH-20
8100 AH-22
8101 AH-22
8102 AH-22
LB8100 AH-22
LB8101 AH-22
LB8102 AH-22
LB8104 AH-23
LB8105 AH-23
LB8106 AH-23
LB8200 AH-24
LB8201 AH-24
LB8202 AH-24
LB8204 AH-24
LB8205 AH-24
LB8206 AH-24
8300 AH-26
8301 AH-26
8302 AH-26
LB8300 AH-27
LB8301 AH-27
LB8302 AH-27
LB8304 AH-28
LB8305 AH-28
LB8306 AH-28
9700 SH-18
FM79 GH-2
FM83 GH-2
FM85 GH-2
FS83 GH-3
FS85 GH-3
HS83 GH-3
HS85 GH-3
FM95 GH-3
FS95 GH-3
HS95 GH-3
FM120 GH-3
FS120 GH-3
HS120 GH-3
“Over 125 Years of Quality”
Classification Of Finishes
GI-4
“Over 125 Years of Quality”
General Information
To determine the correct weight of hinge, it is necessary to know the size and material of the door.
The following chart lists examples of approximate weights ( per square foot ) of various material
doors. Please use this for rough estimating only and be sure to verify the actual weight with the door
manufacturer if there is any question. The weight of the hardware being applied should also be fac-
tored into the total door weight.
DETERMINING HINGE WEIGHT
FREQUENCY OF DOOR USE
It is also necessary to know the frequency of door use when determining the correct weight of hinge.
The following chart lists examples of various types of doors and their estimated frequency of use.
NOTE : Ball bearing hinges should always be provided for doors equipped with door closers.
GI-5
“Over 125 Years of Quality”
To determine the correct hinge height, it is necessary to know the door’s width, height, thickness,
weight and frequency of use. The following chart lists some examples of hinge height as it relates to
the door thickness and width.
NOTE: Heavy doors and doors expected to receive high frequency service should be specified with
heavy weight hinges.
DETERMINING HINGE HEIGHT
DETERMINING HINGE WIDTH
NOTE: A good way to determine the number of hinges necessary is to follow this guideline ( from
NFPA 80, Table 2-8A ): “Doors up to 60” in height shall be provided with two hinges, and an additional
hinge for each 30 inches of height or fraction thereof.”
Doors which are unusually wide ( over 37” ) and heavy and those receiving high frequency use may
require additional hinges.
To determine the correct hinge width, it is necessary to know the door thickness, hinge backset
( distance from back end of hinge to edge of inside door surface ) and clearance required
( necessary distance between the jamb face and door when opened, including trim).
Doors up to 2.25” have .250”
backset
Doors over 2.25” have .375”
backset
NOTE: When the width of a hinge
is greater than the height, it is
termed a “Wide Throw” hinge. This
hinge is used when additional
clearance (throw) is necessary to
clear trim or wall conditions.
General Information
GI-6
“Over 125 Years of Quality”
DETERMINING HINGE WIDTH
The following chart indicates the clearance provided by standard Full Mortise hinges with no
interfering trim or wall conditions.
NOTE: Standard 4.5” wide hinge installed on 1.750” doors will clear 1.5” trim.
The hinge width of Half Mortise, Full Surface and Half Surface hinges is standard, depending on
the hinge height. In these hinge types, the amount of clearance available is determined by the
amount of offset, not by the hinge width ( see catalog pages for offsets ).
The following formula may be used to determine the MINIMUM hinge width necessary:
Door Thickness
- Backset
x 2
+ Clearance Required
+ Inset ( if any )
= Hinge Width ( if not a standard width, use the next larger standard width
General Information
GI-7
DETERMINING THE NUMBER OF HINGES
A general rule to follow is: one hinge for every 30” of door height.
DOOR HEIGHT
Up to 60”
Over 60” up to 90”
Over 90” up to 120”
NUMBER OF HINGES
2 Hinges
3 Hinges
4 Hinges
Also adding an extra hinge when using a door wider than 37” is recomended. This will help remove
tension from the frame caused by the wider door.
“Over 125 Years of Quality”
HINGE SWAGING
Swaging is a slight offset of the hinge leaf at the barrel
which permits the leaves to close to parallel position
as the door closes.
Standard swaging of standard weight and heavy
weight full mortise hinges when closed to the parallel
position provides a 1/16” clearance between leaves.
NOTE A - When both leaves are not swaged, hinges
are slightly less in width.
NOTE B - When one leaf only is swaged, the leaf not
swaged is approximately 1/16” shorter. EXCEPTION:
On hinges for metal doors and metal frames, both
leaves must be the same width - specify on order “
leaves must be equal ”.
In some instances ( ie. Anchor Hinges ), it may be necessary to specify “handed” hinges. The
following illustration shows how to determine if the hinge should be Right Hand ( RH ) or Left
Hand ( LH ). Remember, doors are handed four ( 4 ) ways, while hinges are handed two ( 2 )
ways.
HAND of DOOR
1. Right Hand ( RH )
2. Left Hand ( LH )
3. Right Hand Reverse ( RHR )
4. Left Hand Reverse ( LHR )
HINGE HANDING
HAND of HINGE
1. Right Hand ( RH )
2. Left Hand ( LH )
3. Left Hand ( LH )
4. Right Hand ( RH )
General Information
GI-8
“Over 125 Years of Quality”
BOMMER HAGER STANLEY McKINNEY ANSI
5000 1279 F179 T2714 A8133
5001 1191 F191 T2314 A2133
5002 1191-32D *F191 T2314-32D A5133
BB5000 BB1279 FBB179 TA2714 A8112
BB5001 BB1191 FBB191 TA2314 A2112
BB5002 BB1191-32D *FBB191 TA2314-32D A5112
BB5004 BB1168 FBB168 T4A3786 A8111
BB5005 BB1199 FBB199 T4A3386 A2111
BB5006 BB1199-32D *FBB199 T4A3386-32D A5111
5010 WT1279 F179WT A8133
5011 WT1191 F191WT A2133
5012 WT1191-32D *F191WT A5133
BB5010 WTBB1279 FBB179WT TA2798 A8112
BB5011 WTBB1191 FBB191WT TA2398 A2112
BB5012 WTBB1191-32D *FBB191WT TA2398-32D A5112
BB5014 WTBB1168 FBB168WT T4A3786 A8111
BB5015 WTBB1199 FBB199WT T4A3386 A2111
BB5016 WTBB1199-32D *FBB199WT T4A3386-32D A5111
BB5020 ( SQ.) BB1260 FBB248 TA2895 A8122
BB5020 ( BEV.) BB1261 FBB258 A8122
BB5021 ( SQ.) TA2395 A2122
BB5021 ( BEV.) A2122
BB5022 ( SQ.) BB1360 TA2395-32D A5122
BB5022 ( BEV.) BB1361 A5122
BB5024 ( SQ.) BB1262 FBB268 T4A3795 A8121
BB5024 ( BEV.) BB1263 FBB278 A8121
BB5025 ( SQ.) A2121
BB5025 ( BEV.) A2121
BB5026 ( SQ.) BB1362 T4A3395-32D A5121
BB5026 ( BEV.) BB1363 A5121
BB5034 ( SQ. ) W/ 7 1/2" BB1162 FBB211 A8551
BB5034 ( SQ. ) W/ 4" BB1165 A8551
BB5034 ( SQ. ) LESS DOOR ARM BB1160 A8551
BB5034 ( BEV. ) W/ 7 1/2" BB1166 FBB211 A8551
BB5034 ( BEV. ) W/ 4" BB1167 A8551
BB5035 ( SQ. ) W/ 7 1/2" BB1192 FBB221 A2551
BB5035 ( SQ. ) W/ 4" BB1195 A2551
BB5035 ( SQ. ) LESS DOOR ARM BB1190 A2551
BB5035 ( BEV. ) W/ 7 1/2" BB1196 FBB221 A2551
BB5035 ( BEV. ) W/ 4" BB1197 A2551
BB5036 ( SQ. ) W/ 7 1/2" BB1195-32D *FBB221 TA392 A5551
BB5036 ( SQ. ) W/ 4" BB1195-32D TA392 A5551
BB5036 ( SQ. ) LESS DOOR ARM BB1190-32D TA392 A5551
BB5036 ( BEV. ) W/ 7 1/2" BB1196-32D *FBB221 A5551
BB5036 ( BEV. ) W/ 4" BB1197-32D A5551
BB5040 RBS-BB1279 RB-FBB179 RBMTA2714 A8111
BB5041 RBS-BB1191 RB-FBB191 RBMTA2314 A2111
BB5042 RBS-BB1191-32D *RB-FBB191 RBMTA2314-32D A5111
BB5044 RBS-BB1168 RB-FBB168 RBT4A3786 A8111
BB5045 RBS-BB1199 RB-FBB199 RBT4A3386 A2111
BB5046 RBS-BB1199-32D *RB-FBB199 RBT4A3386-32D A5111
Product Comparison Chart
1. Product and ANSI numbers listed are for comparison only.
2. Additional information may be required for ELECTRIC hinges before a comparison can be made.
3. An “ * ” prefixing a competitor’s number indicates stainless steel material.
4. Please contact the factory for any product(s) not shown in this chart.
NOTES:
GI-9
“Over 125 Years of Quality”
BOMMER HAGER STANLEY McKINNEY ANSI
5050 ( 1 LEAF TAPPED ) 1277 A8133
5050 ( BOTH LEAVES TAPPED ) 1278 A8133
5051 ( 1 LEAF TAPPED ) 1577 A2133
5051 ( BOTH LEAVES TAPPED ) 1578 A2133
5052 ( 1 LEAF TAPPED ) A5133
5052 ( BOTH LEAVES TAPPED ) A5133
BB5050 ( 1 LEAF TAPPED ) BB1277 FBB179 ( B ) TA2714 Type 2 A8112
BB5050 ( BOTH LEAVES TAPPED ) BB1278 FBB179 ( A ) TA2714 Type 1 A8112
BB5051 ( 1 LEAF TAPPED ) BB1577 FBB191 ( B ) TA2314 Type 2 A2112
BB5051 ( BOTH LEAVES TAPPED ) BB1578 FBB191 ( A ) TA2314 Type 1 A2112
BB5052 ( 1 LEAF TAPPED ) BB1577-32D TA2314-32D Type 2 A5112
BB5052 ( BOTH LEAVES TAPPED ) BB1578-32D TA2314-32D Type 1 A5112
5100 1129 F167 T2774 A8233
5101 A2233
5102 A5233
BB5100 BB1129 FBB167 TA2774 A8212
BB5101 BB1109 FBB108 TA3374 A2212
BB5102 BB1109-32D *FBB108 TA3374-32D A5212
BB5104 BB1138 FBB138 T4A3784 A8211
BB5105 BB2098 FBB98 T4A3384 A2211
BB5106 BB2098-32D *FBB98 T4A3384-32D A5211
BB5124 ( SQ.) BB1264 FBB264 T4A3789 A8221
BB5124 ( BEV.) BB1265 FBB274 T4A4789 A8221
BB5125 ( SQ.) A2221
BB5125 ( BEV.) A2221
BB5126 ( SQ.) A5221
BB5126 ( BEV.) A5221
BB5200 BB2171 FBB171 TA2771 A8312
BB5201 BB2110 FBB110 TA3341 A2312
BB5202 BB2110-32D *FBB110 A5312
BB5204 BB2169 FBB169 T4A3785 A8311
BB5205 BB2109 FBB109 T4A3385 A2311
BB5206 BB2109-32D *FBB109 A5311
BB5224 BB1266 FBB266 T4A3797 A8321
BB5225 A2321
BB5226 T4A3397-32D A5321
5300 1173 F173 T2772 A8433
5301 A2433
5302 A5433
BB5300 BB1173 FBB173 TA2772 A8412
BB5301 BB2112 FBB112 TA2372 A2412
BB5302 BB2112-32D *FBB112 TA2372-32D A5412
BB5304 BB1163 FBB163 T4A3782 A8411
BB5305 BB2113 FBB113 T4A3382 A2411
BB5306 BB2113-32D *FBB113 T4A3382-32D A5411
BB5324 BB1270 FBB269 T4A3796 A8421
BB5325 A2421
BB5326 A5421
BB5060 ( 4,6,8,10,12 WIRE ) BB1279 X ETW-4,6,8 CEFBB179-54,56,58 TA2714CC-4,6,8
BB5060 ( 4,6,8 WIRE & MONITOR ) BB1279 X ETM-4,6,8 CECSFBB179-54,56,58 TA2714CCXMM-
BB5060 ( MONITOR ONLY ) BB1279 X ETM CSFBB179 TA2714MM
BB5064 ( 4,6,8,10,12 WIRE ) BB1168 X ETW-4,6,8 CEFBB168-54,56,58 T4A3786CC-4,6,8
BB5064 ( 4,6,8 WIRE & MONITOR ) BB1168 X ETM-4,6,8 CECSFBB168-54,56,58 T4A3786CCXMM-
BB5064 ( MONITOR ONLY ) BB1168 X ETM CSFBB168 T4A3786MM
GI-10
Product Comparison Chart
“Over 125 Years of Quality” GI-11
Product Comparison Chart
BOMMER HAGER STANLEY McKINNEY ANSI
8000 700 T714 A8133
8001 800 T314 A2133
8002 800-32D T314-32D A5133
LB8000 AB700 TA714 A8112
LB8001 AB800 TA314 A2112
LB8002 AB800-32D TA314-32D A5112
LB8004 AB750 T4A786 A8111
LB8005 AB850 T4A386 A2111
LB8006 AB850-32D T4A386-32D A5111
8010 WT700 A8133
8011 WT800 A2133
8012 WT800-32D A5133
LB8010 WTAB700 A8112
LB8011 WTAB800 A2112
LB8012 WTAB800-32D A5112
LB8014 WTAB750 A8111
LB8015 WTAB850 A2111
LB8016 WTAB850-32D A5111
LB8020 ( SQ.) AB7001 A8122
LB8020 ( BEV.) AB7002 A8122
LB8021 ( SQ.) A2122
LB8021 ( BEV.) A2122
LB8022 ( SQ.) A5122
LB8022 ( BEV.) A5122
LB8024 ( SQ.) AB7501 TA795 A8121
LB8024 ( BEV.) AB7502 TA795 A8121
LB8025 ( SQ.) A2121
LB8025 ( BEV.) A2121
LB8026 ( SQ.) A5121
LB8026 ( BEV.) A5121
LB8034 ( SQ. ) W/ 7 1/2" ARM AB7505 TA792 A8551
LB8034 ( SQ. ) W/ 4" ARM AB7506 TA793 A8551
LB8034 ( SQ. ) LESS ARM AB7507 TA791 A8551
LB8034 ( BEV. ) W/ 7 1/2" ARM AB7508 A8551
LB8034 ( BEV. ) W/ 4" ARM AB7509 A8551
LB8035 ( SQ. ) W/ 7 1/2" ARM AB8505 TA392 A2551
LB8035 ( SQ. ) W/ 4" ARM AB8506 TA393 A2551
LB8035 ( SQ. ) LESS ARM AB8507 TA391 A2551
LB8035 ( BEV. ) W/ 7 1/2" ARM AB8508 A2551
LB8035 ( BEV. ) W/ 4" ARM AB8509 A2551
LB8036 ( SQ. ) W/ 7 1/2" ARM AB8505-32D TA392-32D A5551
LB8036 ( SQ. ) W/ 4" ARM AB8506-32D TA393-32D A5551
LB8036 ( SQ. ) LESS ARM AB8507-32D TA391-32D A5551
LB8036 ( BEV. ) W/ 7 1/2" ARM AB8508-32D A5551
LB8036 ( BEV. ) W/ 4" ARM AB8509-32D A5551
LB8040 RBB / RBS-AB700 RBMTA714 A8111
LB8041 RBB / RBS-AB800 A2111
LB8042 RBB / RBS-AB800-32D A5111
LB8044 RBB / RBS-AB750 RBMTA786 A8111
LB8045 RBB / RBS-AB850 A2111
LB8046 RBB / RBS-AB850-32D A5111
“Over 125 Years of Quality”
GI-12
Product Comparison Chart
BOMMER HAGER STANLEY McKINNEY ANSI
8050 ( 1 LEAF TAPPED ) A8133
8050 ( BOTH LEAVES TAPPED ) A8133
8051 ( 1 LEAF TAPPED ) A2133
8051 ( BOTH LEAVES TAPPED ) A2133
8052 ( 1 LEAF TAPPED ) A5133
8052 ( BOTH LEAVES TAPPED ) A5133
LB8050 ( 1 LEAF TAPPED ) A8112
LB8050 ( BOTH LEAVES TAPPED ) A8112
LB8051 ( 1 LEAF TAPPED ) A2112
LB8051 ( BOTH LEAVES TAPPED ) A2112
LB8052 ( 1 LEAF TAPPED ) A5112
LB8052 ( BOTH LEAVES TAPPED ) A5112
8100 A8233
8101 A2233
8102 A5233
LB8100 AB701 TA774 A8212
LB8101 AB801 TA374 A2212
LB8102 AB801-32D TA374-32D A5212
LB8104 AB751 TA784 A8211
LB8105 AB851 TA384 A2211
LB8106 AB851-32D TA384-32D A5211
LB8200 AB702 TA771 A8312
LB8201 AB802 TA371 A2312
LB8202 AB802-32D TA371-32D A5312
LB8204 AB752 TA781 A8311
LB8205 AB852 TA381 A2311
LB8206 AB852-32D TA381-32D A5311
8300 A8433
8301 A2433
8302 A5433
LB8300 AB703 TA772 A8412
LB8301 AB803 TA372 A2412
LB8302 AB803-32D TA372-32D A5412
LB8304 AB753 TA782 A8411
LB8305 AB853 TA382 A2411
LB8306 AB853-32D TA382-32D A5411
LB8060 ( 4,6,8 WIRE ) AB700 X ETW-4,6,8 TA714CC-4,6,8
LB8060 ( 4,6,8 WIRE & MONITOR ) AB700 X ETM-4,6,8 TA714CCXMM-4,6,8
LB8060 ( MONITOR ONLY ) AB700 X ETM TB714MM
LB8064 ( 4,6,8 WIRE ) AB750 X ETW-4,6,8 TA786CC-4,6,8
LB8064 ( 4,6,8 WIRE & MONITOR ) AB750 X ETM-4,6,8 TA786CCXMM-4,6,8
LB8064 ( MONITOR ONLY ) AB750 X ETM TA786MM
“Over 125 Years of Quality”
5000 Series - Five Knuckle, with Button Tips
8000 Series - Three Knuckle, with Flush Tips
Architectural Grade Hinges
Bommer Industries offers two ( 2 ) basic series of BHMA Certified
Architectural Grade Hinges
Both the 5000 and 8000 series hinges are available in a wide variety of sizes, weights, types, three
base materals (steel, brass and stainless steel) and 20 Architectural finishes. Please contact the
factory for any architectural requirement not shown in this catalog.
BALL BEARING ( BB )
BEARINGS
5000 SERIES 8000 SERIES
Steel Hinge Ball Bearings are made from high grade hardened, chrome alloy
steel balls and raceways.
Brass Hinge Ball Bearings are made from high grade stainless steel balls and
stainless steel raceways.
Stainless Steel Hinge Ball Bearings are made from high grade stainless steel
balls and stainless steel raceways.
Every Bommer bearing is engineered for dependable and permanent service.
LUBE BEARING ( LB ) The Concealed Lube Bearing is made from a special nylon bearing material and
is maintenance free and requires little to no oil or grease.
AH-1
BB5000 SERIES LB8000 SERIESLB5000 SERIES
“Over 125 Years of Quality”
Architectural Grade Hinges
FULL
MORTISE
5000 SERIES
8000 SERIES
One leaf is MORTISED in the DOOR edge,
the other leaf is MORTISED in the JAMB.
This is the most common hinge application.
HINGE TYPES
HALF
MORTISE
5100 SERIES
8100 SERIES
One leaf is MORTISED in the DOOR edge,
the other leaf is applied to the SURFACE
(face) of the JAMB. Used when conditions
prevent the jamb leaf from being mortised
(ie. channel iron jamb).
One leaf is applied to the SURFACE (face)
of the DOOR, the other leaf is applied to the
SURFACE (face) of the JAMB. Used when
conditions prevent both hinge leaves from
being mortised (ie. kalamein or mineral
core door with channel iron jamb).
One leaf is applied to the SURFACE (face)
of the DOOR, the other leaf is MORTISED in
the JAMB. Used when conditions prevent
the door leaf from being mortised
(ie. kalamein or mineral core door).
FULL
SURFACE
5200 SERIES
8200 SERIES
HALF
SURFACE
5300 SERIES
8300 SERIES
AH-2
“Over 125 Years of Quality”
Architectural Grade Hinges
HINGE STYLES
WIDE THROW
The WIDTH of the hinge is increased ( ie. 4.5” x 6” ), moving the barrel away
from the face of the door. Used when additional THROW is required to clear
trim or wall conditions. Only available in Full Mortise type. Designate “1” in
the style location of part number (ie. BB5010-456-652)
SWING CLEAR
The hinge leaves are formed to locate the barrel in a position that allows
the door to SWING CLEAR of the opening when opened to 90 degrees.
This permits hospital beds, wheelchairs and other equipment to pass
through the opening without hitting the hinge edge of the door. Designate
“2” in the style location of part number (ie. BB5020-045-652)
ANCHOR
The hinge leaves are mortised in the door and jamb at the top corner,
ANCHORING the door in the jamb. Provides increased reinforcement and
support at the top corner where stress can occur due to high frequency
service and abuse. Only available in Full Mortise type. Designate “3” in the
style location of part number (ie. BB5034-545Z01-652)
RAISED BARREL
Both hinge leaves are offset to RAISE the BARREL off the jamb, allowing the
door to swing without the knuckles rubbing on the jamb. Used when a door is
set deep into a wide frame, prohibiting the use of standard Full Mortise
hinges. Only available in Full Mortise type. Designate “4” in the style location
of part number (ie. BB5040-450-652)
SLIP IN One or both hinge leaves are formed to “SLIP IN” a slot(s) provided in the
door and/or jamb. Normally used with aluminum doors and jambs. Designate
“5” in the style location of part number (ie. BB5050-450G2-652)
AH-3
“Over 125 Years of Quality”
Architectural Grade Hinges
SECURITY OPTIONS
NON-REMOVABLE PIN
A threaded set screw located in the barrel is tightened down into a groove in the hinge
pin. This prevents the hinge pin from being removed when the door is closed. NRP’s
are available with Full Mortise, Half Mortise, Full Surface and Half Surface hinges
( Designate “ N ” ie. BB5000-450N-652 ).
SECURITY STUD
A stud is attached to one leaf of the hinge, and projects into a hole in the other leaf
when the door is closed and the leaves are parallel. This helps maintain the door’s
security even if the hinge pin is removed. Security Studs are available with Full Mortise
hinges only ( Designate “ S ” ie. BB5000-450S-652 ).
NON-REMOVABLE PIN
with SECURITY STUD
Both a Non-Removable Pin and a Security Stud are incorporated in a Full Mortise
hinge ( Designate “ A ” ie. BB5000-450A-652 ).
MAXIMUM SECURITY
STUD
Studs are attached to the back of both hinge leaves, and project into holes in the
hinge reinforcing plates in the door and jamb. These studs secure the leaves to the
door and frame and are often used in combination with hospital tip hinges in high
security areas and institutions ( Designate “ M ” ie. BB5000-450M-652 ).
HOSPITAL TIP
The tips of the barrel are “ rounded ” to help prevent hanging objects on the hinge.
The hinge pin cannot be removed. Hospital tips are used in medical areas to facilitate
cleaning and to prevent tampering and/or injury in security areas and
mental institutions ( Designate “ H ” ie. BB5000-450H-652 ).
TIP AND PIN OPTIONS
DECORATIVE TIPS
Decorative tips are available. Please contact the factory with your requirements
STAINLESS STEEL PIN
Brass and stainless steel hinges are furnished with stainless steel pins.
Steel hinges can also be supplied with stainless steel pins upon request and at an
additional charge ( Designate “ J ” ie. BB5000-450J-652 ).
BRASS PIN
Brass pins can be supplied at an additional charge
( Designate “ K ” ie. BB5001-450K-605 ).
AH-4
BALL TIP
Designate “T”
ACORN TIP
Designate “Y”
STEEPLE TIP
Designate “W”
“Over 125 Years of Quality” AH-5
BOMMER’S numbering system is easy to understand. Product numbers are built
from LEFT to RIGHT with each character relating to a specific hinge feature.
All hinge numbers begin with the TYPE OF BEARING and follow through, ending
with the BHMA or BOMMER FINISH CODE.
M652
H
0504
205
BB
BEARING SERIES TYPE STYLE WEIGHT
& BASE
MATERIAL
SIZE TIP & PIN
OPTIONS SECURITY
OPTIONS BHMA/BOMMER
FINISH CODE
No Designation = Plain Bearing
BB = Ball Bearing
LB = Lubricated Bearing
5 = Five Knuckle
8 = Three Knuckle
0 = Full Mortise
1 = Half Mortise
2 = Full Surface
3 = Half Surface
0 = Standard
1 = Wide Throw
2 = Swing Clear
3 = Anchor
4 = Raised Barrel
5 = Slip In
6 = Electric
7 = 1/4” Radius Corner
8 = 5/8” Radius Corner
9 = Special
0 = Standard Weight, Steel
1 = Standard Weight, Brass
2 = Standard Weight, Stainless Steel
3 = Standard Weight, Rust Resistant
Finish on Steel
4 = Heavy Weight, Steel
5 = Heavy Weight, Brass
6 = Heavy Weight, Stainless Steel
7 = Heavy Weight, Rust Resistant
Finish on Steel
Full Mortise 4" x 4" = 400
Full Mortise 4.5" x 4" = 454
Full Mortise 4.5" x 4.5" = 450
Full Mortise 5" x 5" = 500
Anchor 5" x 4.5" = 545
Full Mortise Hinges are sized height x width.
Swing Clear 5" = 050
Half Mortise 5" = 050
Full Surface 6" = 060
Half Surface 4.5" = 045
Swing Clear, Half Mortise, Full Surface & Half Surface
Hinges are sized by height only.
Tips
H = Hospital Tip
T = Ball Tip
U = Special
W = Steeple Tip
Y = Acorn
Pins:
J = Stainless Steel
K = Brass
N = Non-removable Pin
S = Security Stud
A = Non-removable Pin &
Security Stud
M = Maximum Security
Stud
600 = Prime Coat on Steel ( USP )
605 = Bright Brass on Brass ( US3 )
626 = Satin Chromium on Brass ( US26D )
630 = Satin Stainless Steel ( US32D )
632 = Bright Brass on Steel ( US3 )
652 = Satin Chromium on Steel ( US26D )
EXAMPLES
V
DOOR
OPTIONS
R = Square Door
V = Beveled Door
D = Short Leaf
Z03
ANCHOR
&
SLIP-IN
OPTIONS
ANCHOR HINGE
Z01 = Right Hand Square Door
7 1/2” Door Arm
Z02 = Right Hand Square Door
4” Door Arm
Z03 = Right Hand Square Door
No Door Arm
Z04 = Left Hand Square Door
7 1/2” Door Arm
Z05 = Left Hand Square Door
4” Door Arm
Z06 = Left Hand Square Door
No Door Arm
Z07 = Right Hand Beveled Door
7 1/2” Door Arm
Z08 = Right Hand Beveled Door
4” Door Arm
Z09 = Left Hand Beveled Door
7 1/2” Door Arm
Z10 = Left Hand Beveled Door
4” Door Arm
SLIP-IN HINGES
G1= One Leaf Tapped
w/.1875 Swage
G2= Both Leafs Tapped
w/.3125 swage
ETW04
ELECTRIC
OPTIONS
ETW02 = Electric Thru Wire using 2 Wires
ETW04 = Electric Thru Wire using 4 Wires
ETW06 = Electric Thru Wire using 6 Wires
ETW08 = Electric Thru Wire using 8 Wires
ETW10 = Electric Thru Wire using 10 Wires
ETW12 = Electric Thru Wire using 12 Wires
ETM02 = Electric Thru W ire w/ Monitor 4 Wires
ETM04 = Electric Thru W ire w/ Monitor 4 Wires
ETM06 = Electric Thru W ire w/ Monitor 4 Wires
ETM08 = Electric Thru W ire w/ Monitor 4 Wires
ETM10 = Electric Thru W ire w/ Monitor 4 Wires
EM = Electric Monitor Only ( no thru wires )
“Over 125 Years of Quality”
5000
STEEL
with steel pin
ANSI A8133
5001
BRASS
with stainless steel pin
ANSI A2133
5002
STAINLESS STEEL
with stainless steel pin
ANSI A5133
Full Mortise Hinges
For medium weight doors / low frequency
• TEMPLATE
• PLAIN BEARING
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
STANDARD WEIGHT - PLAIN BEARING - 5 KNUCKLE
• TEMPLATE
• PLAIN BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
AH-6
8000
STEEL
with steel pin
ANSI A8133
8001
BRASS
with stainless steel pin
ANSI A2133
8002
STAINLESS STEEL
with stainless steel pin
ANSI A5133
STANDARD WEIGHT - PLAIN BEARING - 3 KNUCKLE
For medium weight doors / low frequency
*Size
not available in
stainless steel
“Over 125 Years of Quality”
BB5000
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8112
BB5001
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2112
BB5002
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5112
For medium weight doors / average frequency
Full Mortise Hinges
AH-7
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
STANDARD WEIGHT - BALL BEARING - 5 KNUCKLE
LB8000
STEEL
with steel pin
ANSI A8112
LB8001
BRASS
with stainless steel pin
ANSI A2112
LB8002
STAINLESS STEEL
with stainless steel pin
ANSI A5112
For medium weight doors / average frequency
STANDARD WEIGHT - LUBE BEARING - 3 KNUCKLE
*Size
not available in
stainless steel
“Over 125 Years of Quality”
HEAVY WEIGHT - LUBE BEARING
For heavy weight doors / high frequency
LB5004
STEEL
with steel pin
ANSI A8111
LB5005
BRASS
with stainless steel pin
ANSI A2111
LB5006
STAINLESS STEEL
with stainless steel pin
ANSI A5111
• TEMPLATE
• LUBE BEARING
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
AH-8
Full Mortise Hinges
STANDARD WEIGHT - LUBE BEARING
For medium weight doors / average frequency
• TEMPLATE
• LUBE BEARING
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
LB5000
STEEL
with steel pin
ANSI A8112
LB5001
BRASS
with stainless steel pin
ANSI A2112
LB5002
STAINLESS STEEL
with stainless steel pin
ANSI A5112
“Over 125 Years of Quality”
Full Mortise Hinges
HEAVY WEIGHT - BALL BEARING
BB5004
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8111
BB5005
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2111
BB5006
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5111
LB8004
STEEL
with steel pin
ANSI A8111
LB8005
BRASS
with stainless steel pin
ANSI A2111
LB8006
STAINLESS STEEL
with stainless steel pin
ANSI A5111
HEAVY WEIGHT - LUBE BEARING
For heavy weight doors / high frequency
For heavy weight doors / high frequency
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING
REMOVABLE PIN
• BUTTON TIP
PIN & PLUG
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING
REMOVABLE PIN
• FLUSH TIP PIN
& PLUG
AH-9
“Over 125 Years of Quality”
AH-10
STANDARD WEIGHT - PLAIN BEARING - WIDE THROW
For medium weight doors / low frequency, used when additional throw is needed to clear
trim or wall conditions.
• TEMPLATE
• PLAIN BEARING
• FIVE KNUCKLE
• NON-RISING
REMOVABLE PIN
• BUTTON TIP PIN
& PLUG
5010
STEEL
with steel pin
ANSI A8133
5011
BRASS
with stainless steel pin
ANSI A2133
5012
STAINLESS STEEL
with stainless steel pin
ANSI A5133
• TEMPLATE
• PLAIN BEARING
• THREE KNUCKLE
• NON-RISING
REMOVABLE PIN
• FLUSH TIP PIN
& PLUG
8010
STEEL
with steel pin
ANSI A8112
8011
BRASS
with stainless steel pin
ANSI A2112
8012
STAINLESS STEEL
with stainless steel pin
ANSI A5112
STANDARD WEIGHT - PLAIN BEARING - WIDE THROW
Full Mortise Hinges
For medium weight doors / low frequency, used when additional throw is needed to clear
trim or wall conditions.
“Over 125 Years of Quality”
BB5010
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8112
BB5011
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2112
BB5012
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5112
For medium weight doors / average frequency, used when additional throw is needed to
clear trim or wall conditions
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING
REMOVABLE PIN
• BUTTON TIP PIN
& PLUG
Full Mortise Hinges
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING
REMOVABLE PIN
• FLUSH TIP PIN
& PLUG
LB8010
STEEL
with steel pin
ANSI A8112
LB8011
BRASS
with stainless steel pin
ANSI A2112
LB8012
STAINLESS STEEL
with stainless steel pin
ANSI A5112
STANDARD WEIGHT - LUBE BEARING - WIDE THROW
STANDARD WEIGHT - BALL BEARING - WIDE THROW
For medium weight doors / average frequency, used when additional throw is needed to clear
trim or wall conditions
AH-11
“Over 125 Years of Quality”
AH-12
Full Mortise Hinges
HEAVY WEIGHT - BALL BEARING - WIDE THROW
For heavy weight doors / high frequency, used when additional throw is needed to clear
trim or wall conditions
BB5014
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8111
BB5015
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2111
BB5016
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5111
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING
REMOVABLE PIN
• BUTTON TIP
PIN & PLUG
HEAVY WEIGHT - LUBE BEARING - WIDE THROW
LB8014
STEEL
with steel pin
ANSI A8111
LB8015
BRASS
with stainless steel pin
ANSI A2111
LB8016
STAINLESS STEEL
with stainless steel pin
ANSI A5111
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
For heavy weight doors / high frequency, used when additional throw is needed to clear trim
or wall conditions
“Over 125 Years of Quality”
LB8024
STEEL
with steel pin
ANSI A8121
LB8025
BRASS
with stainless steel pin
ANSI A2121
LB8026
STAINLESS STEEL
with stainless steel pin
ANSI A5121
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• SPECIFY DOOR EDGE SQUARE (R) OR BEVELED (V)
BB5024
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8121
BB5025
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2121
BB5026
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5121
HEAVY WEIGHT - SWING CLEAR
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• SPECIFY DOOR EDGE SQUARE (R) OR BEVELED (V)
For heavy weight doors / high frequency. Used where conditions require the door to
completely clear the opening at 90 degrees.
BB5020
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8122
BB5021
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2122
BB5022
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5122
LB8020
STEEL
with steel pin
ANSI A8122
LB8021
BRASS
with stainless steel pin
ANSI A2122
LB8022
STAINLESS STEEL
with stainless steel pin
ANSI A5122
STANDARD WEIGHT - SWING CLEAR
For medium weight doors / average frequency. Used where conditions require the door
to completely clear the opening at 90 degrees.
• TEMPLATE
• TWO BALL BEARING
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• USE ON 1.75” DOOR MAXIMUM
• SPECIFY DOOR EDGE SQUARE (R) OR BEVELED (V)
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• USE ON 1.75” DOOR MAXIMUM
• SPECIFY DOOR EDGE SQUARE (R) OR BEVELED (V)
Full Mortise Hinges
AH-13
“Over 125 Years of Quality”
AH-14
Full Mortise Hinges
HEAVY WEIGHT - BALL BEARING - ANCHOR TYPE
HEAVY WEIGHT - LUBE BEARING - ANCHOR TYPE
For heavy weight doors subject to high frequency service and abuse, Anchor hinges
provide increased reinforcement at the door and jamb where stress can occur.
For heavy weight doors subject to high frequency service and abuse, Anchor hinges
provide increased reinforcement at the door and jamb where stress can occur.
BB5034
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8551
BB5035
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2551
BB5036
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5551
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLES
• NON-REMOVABLE PIN STANDARD
• BUTTON TIP PIN & PLUG
LB8034
STEEL
with steel pin
ANSI A8551
LB8035
BRASS
with stainless steel pin
ANSI A2551
LB8036
STAINLESS STEEL
with stainless steel pin
ANSI A5551
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-REMOVABLE PIN STANDARD
• FLUSH TIP PIN & PLUG
Anchor hinges are used at the top of the door only and are sold separately.
Additional heavy weight, full mortise hinges - BB5004, LB8004, BB5005, LB8005, BB5006, LB8006 5 x 4.5 ( 545 ) -
should be used in the other hinge locations.
The hinge pin is inserted into the bottom of the barrel and held in place by a set screw ( NRP FEATURE ).
When ordering, please specify the following:
1. Hand of door ( RH or LH )
2. Door hinge edge ( square or beveled ).
3. Door reinforcing arm length 7.5” or 4” ( door arm can be omitted from door leaf if required ).
“Over 125 Years of Quality”
BB5040
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8112
BB5041
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2112
BB5042
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5112
STANDARD WEIGHT - RAISED BARREL
LB8040
STEEL
with steel pin
ANSI A8112
LB8041
BRASS
with stainless steel pin
ANSI A2112
LB8042
STAINLESS STEEL
with stainless steel pin
ANSI A5112
Full Mortise Hinges
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• USE ON 1.75” DOOR MAXIMUM
• CAN BE MORTISED OR SURFACE MOUNTED TO JAMB
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLES
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• USE ON 1.75” DOOR MAXIMUM
• CAN BE MORTISED OR SURFACE MOUNTED TO JAMB
For medium weight doors / average frequency. Used where doors are set deep onto a wide frame.
AH-15
BB5044
STEEL
bearings are stainless steel raceways and balls
with steel pin ANSI A8111
BB5045
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2111
BB5046
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5111
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLES
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• CAN BE MORTISED OR SURFACE MOUNTED TO JAMB
For heavy weight doors / high frequency. Used where doors are set deep into a wide frame.
LB8044
STEEL
with steel pin
ANSI A8111
LB8045
BRASS
with stainless steel pin
ANSI A2111
LB8046
STAINLESS STEEL
with stainless steel pin
ANSI A5111
HEAVY WEIGHT - RAISED BARREL
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLES
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• CAN BE MORTISED OR SURFACE MOUNTED TO JAMB
“Over 125 Years of Quality”
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLES
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
For medium weight doors / average frequency. Used for aluminum doors and frames.
Hinge leaves slip into a slot in the door and/or frame.
STANDARD WEIGHT - SLIP IN
BB5050
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8112
BB5051
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2112
BB5052
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5112
LB8050
STEEL
with steel pin
ANSI A8112
LB8051
BRASS
with stainless steel pin
ANSI A2112
LB8052
STAINLESS STEEL
with stainless steel pin
ANSI A5112
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLES
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
Full Mortise Hinges
STANDARD WEIGHT - SLIP IN
5050
STEEL
with steel pin
ANSI A8133
5051
BRASS
with stainless steel pin
ANSI A2133
5052
STAINLESS STEEL
with stainless steel pin
ANSI A5133
For medium weight doors / low frequency. Used for aluminum doors and frames.
Hinge leafs slip into a slot in the door and/or frame.
( G1 ) One leaf tapped with .1875 swage.
( G2 ) Both leaves tapped with .3125 swage.
• TEMPLATE
• PLAIN BEARING
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
8050
STEEL
with steel pin
ANSI A8112
8051
BRASS
with stainless steel pin
ANSI A2112
8052
STAINLESS STEEL
with stainless steel pin
ANSI A5112
• TEMPLATE
• PLAIN BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
AH-16
When ordering please specify the following :
( G1 ) One leaf tapped with .1875 swage.
( G2 ) Both leaves tapped with .3125 swage.
When ordering please specify the following :
“Over 125 Years of Quality”
Full Mortise Electric Hinges
STANDARD WEIGHT - BALL BEARING - ELECTRIC HINGE
BB5060
STEEL
for indoor use
bearings are hardened steel raceways and balls
with steel pin
ANSI A8112
BB5061
BRASS
for outdoor and indoor use
bearings are stainless steel raceways and balls
with stainless steel pin
ANSI A2112
BB5062
STAINLESS STEEL
for outdoor and indoor use
bearings are stainless steel raceways and balls
with stainless steel pin
ANSI A5112
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLES
• NON-REMOVABLE BUTTON TIP PIN & PLUG
• 12” WIRE LEADS STANDARD, 48” WIRE LEADS OPTIONAL
•
LISTED FOR SECURITY EQUIPMENT AMQV
• TESTED TO UL 634 FOR SAFETY CONNECTORS AND SWITCHES
• UL TESTED TO ANSI/BHMA A156.1-2006
• UL CYCLE TESTED TO 350,000 CYCLES
• BOMMER ENDURANCE CYCLE TESTED TO 1,500,000 CYCLES
ELECTRIC HINGES MUST BE
NON-LOAD BEARING.
MOUNT IN CENTER POSITION ONLY.
MAXIMUM WIRE RATING FOR THROUGH WIRE HINGES
• 50 VOLTS AC/DC
• 3.5 AMPS CONTINUOUS
• 16 AMP PULSE
BP6607
Equipment
SECURITY
AH-17
Notes for Electric Hinges:
Consult factory on Swing-Clear Hinges or other electrical information
POWER TRANSFER OPTIONS
• Concealed electric through wires (2, 4, 6, 8, 10, 12)
♦The ETW is for doors requiring low voltage electric current transfer capability only
♦Through wires 22 gauge for 2 wire hinge (18 gauge optional)
♦Through wires 28 gauge for (4, 6, 8, 10, 12) wire hinges
• Concealed electric magnetic monitor
♦The EM is for doors requiring monitoring capability only
♦Uses an enclosed switch and adjustable magnet to provide control for monitoring sensitivity
• Concealed electric through wires (2, 4, 6, 8) with magnetic monitor
♦The ETM is for doors requiring both low voltage electric current transfer and monitoring capability
• Contact factory for wire options
“Over 125 Years of Quality”
STANDARD WEIGHT - LUBE BEARING - ELECTRIC HINGE
LB8060
STEEL
for indoor use
with steel pin
ANSI A8112
LB8061
BRASS
for outdoor and indoor use
with stainless steel pin
ANSI A2112
LB8062
STAINLESS STEEL
for outdoor and indoor use
with stainless steel pin
ANSI A5112
BP6607
Equipment
SECURITY
MAXIMUM WIRE RATING FOR THROUGH WIRE HINGES
• 50 VOLTS AC/DC
• 3.5 AMPS CONTINUOUS
• 16 AMP PULSE
AH-18
Full Mortise Electric Hinges
ELECTRIC HINGES MUST BE
NON-LOAD BEARING.
MOUNT IN CENTER POSITION ONLY.
Notes for Electric Hinges:
Consult factory on Swing-Clear Hinges or other electrical information
• TEMPLATE
• LUBE BEARING
• FIVE KNUCKLES
• NON-REMOVABLE BUTTON TIP PIN & PLUG
• 12” WIRE LEADS STANDARD, 48” WIRE LEADS OPTIONAL
•
LISTED FOR SECURITY EQUIPMENT AMQV
• TESTED TO UL 634 FOR SAFETY CONNECTORS AND SWITCHES
• UL TESTED TO ANSI/BHMA A156.1-2006
• UL CYCLE TESTED TO 350,000 CYCLES
• BOMMER ENDURANCE CYCLE TESTED TO 1,500,000 CYCLES
POWER TRANSFER OPTIONS
• Concealed electric through wires (2, 4, 6, 8, 10, 12)
♦The ETW is for doors requiring low voltage electric current transfer capability only
♦Through wires 22 gauge for 2 wire hinge (18 gauge optional)
♦Through wires 28 gauge for (4, 6, 8, 10, 12) wire hinges
• Concealed electric magnetic monitor
♦The EM is for doors requiring monitoring capability only
♦Uses an enclosed switch and adjustable magnet to provide control for monitoring sensitivity
• Concealed electric through wires (2, 4, 6, 8) with magnetic monitor
♦The ETM is for doors requiring both low voltage electric current transfer and monitoring capability
• Contact factory for wire options
“Over 125 Years of Quality” AH-19
Full Mortise Electric Hinges
HEAVY WEIGHT - BALL BEARING - ELECTRIC HINGE
BB5064
STEEL
for indoor use
bearings are hardened steel raceways and balls
with steel pin
ANSI A8111
BB5065
BRASS
for outdoor and indoor use
bearings are stainless steel raceways and balls
with stainless steel pin
ANSI A2111
BB5066
STAINLESS STEEL
for outdoor and indoor use
bearings are stainless steel raceways and balls
with stainless steel pin
ANSI A5111
BP6607
Equipment
SECURITY
MAXIMUM WIRE RATING FOR THROUGH WIRE HINGES
• 50 VOLTS AC/DC
• 3.5 AMPS CONTINUOUS
• 16 AMP PULSE
ELECTRIC HINGES MUST BE
NON-LOAD BEARING.
MOUNT IN CENTER POSITION ONLY.
Notes for Electric Hinges:
Consult factory on Swing-Clear Hinges or other electrical information
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLES
• NON-REMOVABLE BUTTON TIP PIN & PLUG
• 12” WIRE LEADS STANDARD, 48” WIRE LEADS OPTIONAL
•
LISTED FOR SECURITY EQUIPMENT AMQV
• TESTED TO UL 634 FOR SAFETY CONNECTORS AND SWITCHES
• UL TESTED TO ANSI/BHMA A156.1-2006
• UL CYCLE TESTED TO 350,000 CYCLES
• BOMMER ENDURANCE CYCLE TESTED TO 1,500,000 CYCLES
POWER TRANSFER OPTIONS
• Concealed electric through wires (2, 4, 6, 8, 10, 12)
♦The ETW is for doors requiring low voltage electric current transfer capability only
♦Through wires 22 gauge for 2 wire hinge (18 gauge optional)
♦Through wires 28 gauge for (4, 6, 8, 10, 12) wire hinges
• Concealed electric magnetic monitor
♦The EM is for doors requiring monitoring capability only
♦Uses an enclosed switch and adjustable magnet to provide control for monitoring sensitivity
• Concealed electric through wires (2, 4, 6, 8) with magnetic monitor
♦The ETM is for doors requiring both low voltage electric current transfer and monitoring capability
• Contact factory for wire options
“Over 125 Years of Quality”
HEAVY WEIGHT - LUBE BEARING - ELECTRIC HINGE
LB8064
STEEL
for indoor use
with steel pin
ANSI A8111
LB8065
BRASS
for outdoor and indoor use
with stainless steel pin
ANSI A2111
LB8066
STAINLESS STEEL
for outdoor and indoor use
with stainless steel pin
ANSI A5111
MAXIMUM WIRE RATING FOR THROUGH WIRE HINGES
• 50 VOLTS AC/DC
• 3.5 AMPS CONTINUOUS
• 16 AMP PULSE
BP6607
Equipment
SECURITY
AH-20
Full Mortise Electric Hinges
ELECTRIC HINGES MUST BE
NON-LOAD BEARING.
MOUNT IN CENTER POSITION ONLY.
Notes for Electric Hinges:
Consult factory on Swing-Clear Hinges or other electrical information
• TEMPLATE
• LUBE BEARING
• FIVE KNUCKLES
• NON-REMOVABLE BUTTON TIP PIN & PLUG
• 12” WIRE LEADS STANDARD, 48” WIRE LEADS OPTIONAL
• LISTED FOR SECURITY EQUIPMENT AMQV
• TESTED TO UL 634 FOR SAFETY CONNECTORS AND SWITCHES
• UL TESTED TO ANSI/BHMA A156.1-2006
• UL CYCLE TESTED TO 350,000 CYCLES
• BOMMER ENDURANCE CYCLE TESTED TO 1,500,000 CYCLES
POWER TRANSFER OPTIONS
• Concealed electric through wires (2, 4, 6, 8, 10, 12)
♦The ETW is for doors requiring low voltage electric current transfer capability only
♦Through wires 22 gauge for 2 wire hinge (18 gauge optional)
♦Through wires 28 gauge for (4, 6, 8, 10, 12) wire hinges
• Concealed electric magnetic monitor
♦The EM is for doors requiring monitoring capability only
♦Uses an enclosed switch and adjustable magnet to provide control for monitoring sensitivity
• Concealed electric through wires (2, 4, 6, 8) with magnetic monitor
♦The ETM is for doors requiring both low voltage electric current transfer and monitoring capability
• Contact factory for wire options
“Over 125 Years of Quality” AH-21
Full Mortise Electric Hinges
ELECTRIC HINGE CONNECTORS
Bommer’s New Electrical Connector Option
The full mortise electrical hinges with Molex Micro Fit 3.0 connectors allow for simpler and quicker installations.
The connector eliminates the need for separate or exposed wiring.
( ETW02 ) Electric Through Wire 02 uses 22AWG wire and a 2 position connector
( ETW04 ) Electric Through Wire 04 uses 28AWG wire and a 4 position connector
( ETW06 ) Electric Through Wire 06 uses 28AWG wire and both a 2 & 4 position connector
( ETW08 ) Electric Through Wire 08 uses 28AWG wire and a 8 position connector
( ETW10 ) Electric Through Wire 10 uses 28AWG wire and both a 2 & 8 position connector
( ETW12 ) Electric Through Wire 12 uses 28AWG wire and both a 4 & 8 position connector
MAXIMUM RATING FOR CONNECTORS
• 24 VOLTS AC/DC
• 1 AMPS CONTINUOUS
• 16 AMP IN RUSH FOR 820 MILLISECONDS
Mortar Box for Electric Hinges
BB5060-MB-1
GALVANIZED STEEL
• SHIELDS ELECTRIC FITTINGS FROM MORTAR
• FOR USE WITH BOMMER 5000 & 8000 SERIES ELECTRIC HINGES
• FITS HINGE REINFORCEMENTS FOR 4", 4 1/2" OR 5" HINGES
• SERVICED THROUGH REMOVABLE BACK
• TOP & BOTTOM KNOCKOUTS FOR STANDARD CONDUITS
• INSTALLED ON THE JOB PRIOR TO SETTING JAMB OR AT HOLLOW METAL MANUFACTURERS
“Over 125 Years of Quality”
STANDARD WEIGHT
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLES
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
LB8100
STEEL
with steel pin
ANSI A8212
LB8101
BRASS
with stainless steel pin
ANSI A2212
LB8102
STAINLESS STEEL
with stainless steel pin
ANSI A5212
BB5100
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8212
BB5101
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2212
BB5102
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5212
For medium weight doors / average frequency. Normally used when door is hung in a
channel iron jamb.
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLES
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
5100
STEEL
with steel pin
ANSI A8233
5101
BRASS
with stainless steel pin
ANSI A2233
5102
STAINLESS STEEL
with stainless steel pin
ANSI A5233
Half Mortise Hinges
For medium weight doors / low frequency. Normally used when door is hung in a channel
iron jamb.
• TEMPLATE
• PLAIN BEARING
• FIVE KNUCKLES
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
STANDARD WEIGHT - PLAIN BEARING
• TEMPLATE
• PLAIN BEARING
• THREE KNUCKLES
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
AH-22
8100
STEEL
with steel pin
ANSI A8133
8101
BRASS
with stainless steel pin
ANSI A2133
8102
STAINLESS STEEL
with stainless steel pin
ANSI A5133
“Over 125 Years of Quality”
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLES
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
HEAVY WEIGHT
BB5104
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8211
BB5105
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2211
BB5106
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5211
LB8104
STEEL
with steel pin
ANSI A8211
LB8105
BRASS
with stainless steel pin
ANSI A2211
LB8106
STAINLESS STEEL
with stainless steel pin
ANSI A5211
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLES
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
Half Mortise Hinges
For heavy weight doors / high frequency. Normally used when door is hung in a channel
iron jamb.
AH-23
For heavy weight doors / high frequency. Used where conditions require the door to clear
the opening at 90 degrees.
BB5124
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8221
BB5125
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2221
BB5126
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5221
HEAVY WEIGHT - BALL BEARING - SWING CLEAR
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• SPECIFY DOOR EDGE SQUARE (R) OR BEVELED (V)
“Over 125 Years of Quality”
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
HEAVY WEIGHT - BALL BEARING
BB5204
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8311
BB5205
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2311
BB5206
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5311
LB8204
STEEL
with steel pin
ANSI A8311
LB8205
BRASS
with stainless steel pin
ANSI A2311
LB8206
STAINLESS STEEL
with stainless steel pin
ANSI A5311
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
For heavy weight doors / high frequency. Normally used on composite core doors with
channel iron jambs. Thru-bolts and grommet nuts supplied for door leaf.
Full Surface Hinges
STANDARD WEIGHT
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
LB8200
STEEL
with steel pin
ANSI A8312
LB8201
BRASS
with stainless steel pin
ANSI A2312
LB8202
STAINLESS STEEL
with stainless steel pin
ANSI A5312
BB5200
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8312
BB5201
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2312
BB5202
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5312
For medium weight doors / average frequency. Normally used on composite core doors
with channel iron jambs. Thru-bolts and grommet nuts supplied for door leaf.
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
AH-24
“Over 125 Years of Quality”
Full Surface Hinges
For heavy weight doors / high frequency. Used where conditions require the door to clear the
opening at 90 degrees.
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLES
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
BB5224
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8321
BB5225
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2321
BB5226
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5321
HEAVY WEIGHT - SWING CLEAR
AH-25
HEAVY WEIGHT - LUBE BEARING - ANCHOR PIVOT
For medium and heavy weight doors subject to high frequency service and abuse, providing increased reinforcement at
the top corner on the hinge side of the door and jamb where stress can occur and is surface applied with no special
frame or door preparation. This pivot will help overcome field problems such as bent hinge leaves, loose hinge reinforce-
ments and loose screws.
7004
STEEL
with steel pin
7006
STAINLESS STEEL
with stainless steel pin
• NON-TEMPLATE
• LUBE BEARING
• HEX HEAD THREADED PIVOT PIN STANDARD
• STANDARD SCREW PACK OF:
8ea. MACHINE SCREWS ( 1/4”-20 x 3/4” FHMS )
8ea. WOOD SCREWS ( 8ea. #14 x 1 1/4” FHSMS )
4ea. SLEEVE BOLTS FOR 1/4”-20 THREAD TO FIT 1 3/4” DOORS
• SHIMS MAY BE USED IF NEEDED
Full Surface Anchor Pivot
“Over 125 Years of Quality”
Half Surface Hinges
STANDARD WEIGHT - PLAIN BEARING
5300
STEEL
with steel pin
ANSI A8433
5301
BRASS
with stainless steel pin
ANSI A2433
5302
STAINLESS STEEL
with stainless steel pin
ANSI A5433
• TEMPLATE
• PLAIN BEARING
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
For medium weight doors / low frequency. Normally used on composite core doors with hollow
metal jambs.
• TEMPLATE
• PLAIN BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
8300
STEEL
with steel pin
ANSI A8433
8301
BRASS
with stainless steel pin
ANSI A2433
8302
STAINLESS STEEL
with stainless steel pin
ANSI A5433
STANDARD WEIGHT - PLAIN BEARING
For medium weight doors / low frequency. Normally used on composite core doors with hollow
metal jambs.
AH-26
“Over 125 Years of Quality”
Half Surface Hinges
STANDARD WEIGHT - BALL BEARING
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
LB8300
STEEL
with steel pin
ANSI A8412
LB8301
BRASS
with stainless steel pin
ANSI A2412
LB8302
STAINLESS STEEL
with stainless steel pin
ANSI A5412
BB5300
STEEL
bearings are hardened steel raceways and balls
with stainless steel pin ANSI A8412
BB5301
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2412
BB5302
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5412
For medium weight doors / average frequency. Normally used on composite core doors
with hollow metal jambs.
• TEMPLATE
• TWO BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
STANDARD WEIGHT - LUBE BEARING
For medium weight doors / average frequency. Normally used on composite core doors
with hollow metal jambs.
AH-27
“Over 125 Years of Quality”
BB5324
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8421
BB5325
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2421
BB5326
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5421
HEAVY WEIGHT - BALL BEARING - SWING CLEAR
For heavy weight doors / high frequency. Used where conditions require the door to
clear the opening at 95 degrees.
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
• TEMPLATE
• LUBE BEARING
• THREE KNUCKLE
• NON-RISING REMOVABLE PIN
• FLUSH TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
HEAVY WEIGHT
BB5304
STEEL
bearings are hardened steel raceways and balls
with steel pin ANSI A8411
BB5305
BRASS
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A2411
BB5306
STAINLESS STEEL
bearings are stainless steel raceways and balls
with stainless steel pin ANSI A5411
LB8304
STEEL
with steel pin
ANSI A8411
LB8305
BRASS
with stainless steel pin
ANSI A2411
LB8306
STAINLESS STEEL
with stainless steel pin
ANSI A5411
• TEMPLATE
• FOUR BALL BEARINGS
• FIVE KNUCKLE
• NON-RISING REMOVABLE PIN
• BUTTON TIP PIN & PLUG
• THRU-BOLTS & GROMMET NUTS SUPPLIED FOR DOOR
Half Surface Hinges
For heavy weight doors / high frequency. Normally used on composite core doors with
hollow metal jambs.
AH-28
“Over 125 Years of Quality”
Labeled Doors - Maximum door sizes and number of hinges required is based on limits set forth
in NFPA #80. NFPA #80 requires a minimum of two ( 2 ) spring hinges on labeled fire door applications.
LB4300 Series hinges are listed by UL for fire rated openings up to and including 3 hour, A label open-
ings. Wind conditions, excessive air pressure on side of opening, or other adverse job conditions may
require the use of all spring hinges. For maximum versatility use all spring hinges.
UL listed spring hinges are not available with reverse springs.
Maximum Labeled Door Size - 3’-0” wide x 7’-0” high x 1 3/4” thick as set in NFPA #80.
PLEASE NOTE : Always verify local fire code requirements.
Non-Labeled Doors - Maximum door width - 4’-0”. For doors over 7’-6” in height, use an additional hinge
for each additional 30” of height or fraction thereof.
Minimizes cost of installing a door closing device on industrial, commercial, institutional and
residential applications. Used to convert doors to self-closing in existing buildings. For use in
hotels, motels, apartments, dormitories, residences, etc., where doors are required to be self
closing. ( always verify local fire code requirements )
Uses for Single Acting Spring Hinge
LUBE BEARING LB4300 SERIES
Single Acting Spring Hinge
SH-1
HINGE SELECTION FOR MAXIMUM DOOR SIZE
*
NOTES:
When Installing a Bommer LB4300 Series Spring Hinge with a butt hinge the following guidelines should be followed:
3 1/2” and 4” .096 Gage Spring Hinge with 3 1/2” and 4” Residential butt hinge gage .085 to .109
3 1/2” and 4” .130 Gage Spring Hinge with 3 1/2” and 4” light Commercial butt hinge gage .123 to .130
4 1/2” .134 Gage Spring Hinge with 4 1/2” Commercial butt hinge gage .134
LISTED GRADE 1 UNITED STATES AND CANADA
BHMA Certified GRADE 1 For 1 Million Cycles
Bommer Industries Lube Bearing LB4300 Series Single Acting Spring Hinge is Listed by
Underwriters Laboratories to meet ANSI A156.17 Grade 1 for self closing hinges ( approved for fire door
applications ). BHMA Certified to conform to all ANSI A156.17 Grade 1 standards for 1 million cycles.
PATENT 6,460,220
“Over 125 Years of Quality”
SH-2
LUBE BEARING LB4300 SERIES
Single Acting Spring Hinge
Installation Instructions
CAUTION: Do not exceed three ( 3 ) holes
tension for 180 degrees door opening, or
four ( 4 ) holes tension for 90 degrees
door opening.
WORK SAFELY USE PROPER SAFETY PROTECTION.
1. Hinge Installation:
Install Hinge in normal manner with tension adjustment
up as shown.
2. Adjusting Spring Torque:
( A ) Place the door in the closed position.
( B ) Insert Tension Lever in right hand hole in the
adjustment slot see figure 1.
( C ) Rotate Tension Lever to the left and insert Tension
Pin loosley in hole to the right of Tension Lever as
shown in figure 2.
( D ) Release Tension Lever until Tension Pin contacts
the right hand side of the Adjustment Slot.
( E ) Remove Tension Lever and check the door for
closing force, if desired closing force is not
achieved, repeat steps A to E until closing force is
satisfactory.
( F ) When the hinges have been adjusted to close
the door properly, drive the Tension Pin flush with
the hinge tube. CAUTION: Always Install hinges
with tension adjustment slot up as
shown, always rotate tension lever
to the left regardless of right or left
hand door applications.
PATENT 6,460,220
“Over 125 Years of Quality” SH-3
BOMMER’S numbering system is easy to understand. Product numbers
are built from LEFT to RIGHT with each character relating to a specific
hinge feature.
400
C1243
SERIES TYPE STYLE SIZE BHMA/BOMMER
FINISH CODE
LB = LUBRICATED BEARING
43 = Single Acting Spring Hinge
10 = Template Hole Pattern Square Corner
11 = Template Hole Pattern 1/4” Radius
12 = Template Hole Pattern 5/8” Radius
13 = Half Surface Template Hole Pattern on Jamb Leaf - Special Hole Pattern Door Leaf
21 = 1/4” Radius Perma - Door
22 = 5/8” Radius Perma - Door
33 = 5/8” Radius & Square Johnson
40 = 5/8” Radius Pease
42 = 5/8” Radius Pease
50 = Square Peachtree
60 = 5/8” Radius Acorn
61 = 5/8” Radius & Square Castlgate
62 = Square Castlgate
76 = 5/8” Radius & Square Johnson / Integrity
81 = 5/8” Radius & Square Stanley Door Systems
82 = 5/8” Radius General Products
90 = Stainless Steel Template Hole Pattern Square Corner
91 = Stainless Steel Template Hole Pattern 1/4” Radius
92 = Stainless Steel Template Hole Pattern 5/8” Radius
350 = 3 1/2” x 3 1/2”
400 = 4” x 4”
454 = 4 1/2” x 4”
450 = 4 1/2” x 4 1/2” 600 = Prime Coat on Steel ( USP )
632 = Bright Brass Plated Cleas Coated ( US3 )
633 = Satin Brass Plated Cleas Coated ( US4 )
630 = Satin Stainless Steel ( US32D )
652 = Satin Chrome on Steel ( US26D )
EXAMPLES
BP
PACKAGING
No Designation = Standard Packing
BP = Builders Pack
B = Bulk Pack
CP = Custom Pack
S = Single Pack
No Designation = .096” Residential Grade
C = .130 / .134” Commercial Grade
652LB
BEARING
Z
SPECIAL
Z = Special Fabrication
( Non UL Listed )
“Over 125 Years of Quality”
Single Acting Spring Hinges
LB4310-350
Square Corner LB4311-350
1/4” Radius
LB4312-350
5/8” Radius
LB4310-400
Square Corner LB4311-400
1/4” Radius
LB4312-400
5/8” Radius
SH-4
LUBE BEARING LB4300 SERIES
PATENT 6,460,220
All Bommer LB4300 Series
Hinges Have the UL Listing
Mark Stamped on each Hinge
“Over 125 Years of Quality”
Single Acting Spring Hinges
LUBE BEARING LB4300 SERIES
LB4310
STEEL
FULL MORTISE
ANSI K81071F
LB4311
STEEL
FULL MORTISE
ANSI K81071F
LB4312
STEEL
FULL MORTISE
ANSI K81071F
• UL LISTED FOR FIRE DOOR APPLICATIONS
• NON-HANDED
• STEEL MATERIAL
• SELF LUBRICATING BEARINGS
• EASILY ADJUSTABLE SPRING TENSION
• ANSI TEMPLATED SCREW HOLE PATTERN
• PIVOT POINT ALIGNS WITH RESIDENTIAL BUTT HINGES GAGE .085 TO .109
SH-5
PATENT 6,460,220
NOTES :
Reverse springs available that are not “UL Listed”, please contact factory for availability.
“Over 125 Years of Quality”
Single Acting Spring Hinges
SH-6
LUBE BEARING LB4300 SERIES SPECIAL HINGE TYPES
PLEASE NOTE :
Always contact the factory if you
do not see the hinge that matches your door or frame,
Bommer has over 70 different Lube Bearing LB4300
special hinge types available.
PATENT 6,460,220
“Over 125 Years of Quality”
Single Acting Spring Hinges
• UL LISTED FOR FIRE DOOR APPLICATIONS
• NON-HANDED
• SPECIAL TEMPLATE HOLE LOCATION
• DESIGNED TO FIT STANDARD HINGE PREPARATION OF DOOR AND FRAME MANUFACTURERS LISTED
• STEEL MATERIAL
• EASILY ADJUSTABLE SPRING TENSION
• PIVOT POINT ALIGNS WITH RESIDENTIAL BUTT HINGES GAGE .085 TO .109
SPECIAL
LB4300
SERIES STEEL
FULL MORTISE
ANSI K81071F
PLEASE NOTE :
Always request a current template from the factory to assure you are ordering the
correct hinge.
SH-7
LUBE BEARING LB4300 SERIES SPECIAL HINGE TYPES
PLEASE NOTE :
Always contact the factory for the hinge that matches your door or frame, Bommer
has over 70 different special hinge types available.
PATENT 6,460,220
“Over 125 Years of Quality”
Single Acting Spring Hinges
SH-8
LUBE BEARING LB4300C SERIES CONTRACT GRADE
PATENT 6,460,220
“Over 125 Years of Quality”
Single Acting Spring Hinges
LB4310C
STEEL
FULL MORTISE
ANSI K81071F
LB4311C
STEEL
FULL MORTISE
ANSI K81071F
LB4312C
STEEL
FULL MORTISE
ANSI K81071F
LB4313C
STEEL
HALF SURFACE
ANSI K81081F
• UL LISTED FOR FIRE DOOR APPLICATIONS
• NON-HANDED
• STEEL & STAINLESS STEEL MATERIAL
• SELF LUBRICATING BEARINGS
• EASILY ADJUSTABLE SPRING TENSION
• ANSI TEMPLATED SCREW HOLE PATTERN
• PIVOT POINT ALIGNS WITH COMMERCIAL BUTT HINGES
GAUGE .123 TO .134
LB4390C
STAINLESS STEEL
FULL MORTISE
ANSI K51071F
LB4391C
STAINLESS STEEL
FULL MORTISE
ANSI K51071F
LB4392C
STAINLESS STEEL
FULL MORTISE
ANSI K51071F
SH-9
LUBE BEARING LB4300C SERIES CONTRACT GRADE
PATENT 6,460,220
“Over 125 Years of Quality”
Single Acting Spring Hinges
4000 SERIES
4010
STEEL
NON-TEMPLATE
ANSI K81011
4020
STEEL
STANDARD 4 1/2” MORTISE
ANSI K81071
CL4010
STEEL CLASSIC BALL TIP
NON-TEMPLATE
ANSI K81011
CL4020
STEEL CLASSIC BALL TIP
STANDARD 4 1/2” MORTISE
ANSI K81071
HINGE SELECTION FOR MAXIMUM DOOR SIZE
• NON-HANDED
• STEEL MATERIAL
• AVAILABLE WITH REVERSE SPRING
• CLASSIC MODELS AVAILABLE WITH BALL TIPS 6” & 7” ONLY
• EASILY ADJUSTABLE SPRING TENSION
• PIVOT POINTS DO NOT ALIGN WITH STANDARD FULL MORTISE HINGES
PLEASE NOTE:
Always request a current template from the factory to assure you are
ordering the correct hinge
Reverse springs available, please specify “R” after item number when
ordering ( example: 4010R-6-603 )
4020
4 1/2”template
hole pattern
4010
non-template
hole pattern
SH-10
CL4010
ball tip
non-template
hole pattern
CL4020
ball tip
4 1/2”template
hole pattern
“Over 125 Years of Quality”
Single Acting Spring Hinges
4030
STEEL
STANDARD 4 1/2” MORTISE
ANSI K81071F
4040
STEEL
NON-TEMPLATE
ANSI K81011F
CL4030
STEEL CLASSIC BALL TIP
STANDARD 4 1/2” MORTISE
ANSI K81011F
CL4040
STEEL CLASSIC BALL TIP
NON-TEMPLATE
ANSI K81071F
Labeled Doors
Maximum door sizes and number of hinges required is based on limits set by
NFPA Standard # 80 ( 2 spring hinges minimum )
These hinges are listed by UL for fire rated openings up to and including 3 hour, A label openings.
Maximum Labeled door size - 3’-0” x 7’-0” x 1 3/4” as set by NFPA Standard # 80
PLEASE NOTE
: Always verify local fire code requirements
Non-Labeled Doors
- Maximum door width - 4’-0”. For doors over 7’-6” in height, use an additional hinge for each
additional 30” of height or fraction thereof.
• NON-HANDED
• STEEL MATERIAL
• CLASSIC MODELS AVAILABLE WITH BALL TIPS
• UL LISTED FOR FIRE DOOR APPLICATIONS
• FACTORY SET SPRING TENSION
• PIVOT POINTS DO NOT ALIGN WITH STANDARD FULL MORTISE HINGES
PLEASE NOTE:
Always request a current template from the factory to assure you are
ordering the correct hinge.
HINGE SELECTION FOR MAXIMUM DOOR SIZE
SH-11
4030
4 1/2”template
hole pattern
4040
non-template
hole pattern
CL4040
ball tip
non-template
hole pattern
CL4030
ball tip
4 1/2”template
hole pattern
4000 SERIES UL LISTED
“Over 125 Years of Quality”
• Permits doors to open in either direction and automatically return to closed position.
• Provides maximum protection for doors subject to normal abuse of lift trucks, due to resiliency of spring support and
shock absorbing reaction of flexible mounting.
• Available in size to accommodate a wide range of door sizes and weights.
• Adjustable spring tension permits power and speed adjustment of each size spring hinge.
• No hanging strip is required on frame.
Top View of Double Acting Spring Hinge Operation
door open door closed door open
Double Acting Spring Hinges
3000 Series
SH-12
It is advisable to use three hinges on a door. The center hinge should be installed as close as possible to the top
hinge for maximum support.
90
o
90
o
door
jamb
door door
jamb jamb
7” from bottom of door
to bottom of hinge
as close to top of door
to top of hinge 3” max.
2”- 3” between top and
bottom of hinges
Guide Lines for Double Acting Hinge Locations on Doors
“Over 125 Years of Quality” SH-13
• DOOR FLANGE IS MORTISED INTO EDGE OF DOOR
• CLASSIC MODELS AVAILABLE WITH BALL TIPS 5”, 6” & 7” ONLY
• JAMB FLANGE IS SURFACE APPLIED TO JAMB
• STEEL MATERIAL
• NON- TEMPLATE
• NON-HANDED
• DO NOT USE ON DOORS WITH HINGE EDGE BEVELED
• PACKED WITH ALL WOOD SCREWS
• DOOR FLANGE IS MORTISED INTO EDGE OF DOOR
• CLASSIC MODELS AVAILABLE WITH BALL TIPS 5” & 6” ONLY
• JAMB FLANGE IS SURFACE APPLIED TO JAMB
• STEEL MATERIAL
• TEMPLATE DOOR LEAF
• NON-HANDED
• DO NOT USE ON DOORS WITH HINGE EDGE BEVELED
• PACKED WITH MACHINE AND WOOD SCREWS
3029- 3” through 8”
MORTISE
ANSI K81041
CL3029- 5”, 6” & 7”
BALL TIPS
ANSI K81041
3029 HINGE SELECTION FOR MAXIMUM DOOR SIZE
Double Acting Spring Hinges
3000 Series
* Hinges will fit into standard full mortise hinge cutout in hollow metal door ; but if standard hinge locations are furnished on
1 3/4” hollow metal doors, we recommend using 3029-8 x 4 1/2 hinges for maximum support. Request template from factory
for door and frame clearance required.
3029
non-template hole
pattern
CL3029
ball tips
3029-6x41/2
template door
leaf
3029- 5 x 3 1/2”
MORTISE
3029- 6 x 4 1/2”
MORTISE
3029- 8 x 4 1/2”
MORTISE
ANSI K81151
CL3029- 5 x 3 1/2”
BALL TIPS
CL3029- 6 x 4 1/2”
BALL TIPS
ANSI K81151
“Over 125 Years of Quality”
SH-14
3023- 3” through 8”
HALF SURFACE
ANSI K81131
CL3023- 5”, 6” & 7”
BALL TIPS
ANSI K81131
• DOOR FLANGE IS SURFACE APPLIED TO FACE OF DOOR
• CLASSIC MODELS AVAILABLE WITH BALL TIPS 5”, 6” & 7” ONLY
• JAMB FLANGE IS SURFACE APPLIED TO JAMB
• STEEL MATERIAL
• NON- TEMPLATE
• NON-HANDED
• DO NOT USE ON DOORS WITH HINGE EDGE BEVELED
• PACKED WITH ALL WOOD SCREWS
3023 HINGE SELECTION FOR MAXIMUM DOOR SIZE
Double Acting Spring Hinges
3000 Series
3023
half surface
3023 top view
jamb
CL3023
ball tips
door
“Over 125 Years of Quality” SH-15
Double Acting Spring Hinges
3000 Series
3024- 4” through 8”
CLAMP FLANGE
ANSI K81111
CL3024- 5”, 6” & 7”
BALL TIPS
ANSI K81111
• BOX CLAMP TYPE DOOR FLANGE IS ATTACHED TO DOOR WITH THRU BOLTS AND NUTS
• CLASSIC MODELS AVAILABLE WITH BALL TIPS 5”, 6” & 7” ONLY
• JAMB FLANGE IS SURFACE APPLIED TO JAMB
• STEEL MATERIAL
• NON- TEMPLATE
• NON-HANDED
• PACKED WITH THROUGH BOLTS AND MACHINE SCREWS
• CLAMP FLANGES ARE NOT ADJUSTABLE - THICKNESS OF THE DOOR MUST BE INCLUDED ON ORDER
3024 HINGE SELECTION FOR MAXIMUM DOOR SIZE
door box clamp
3024 top view
3024
box clamp
CL3024
ball tips
“Over 125 Years of Quality”
SH-16
Double Acting Spring Hinges
3000 Series
3044- 8”
CLAMP FLANGE - INDUSTRIAL
ANSI K81091
• BOX CLAMP TYPE DOOR FLANGE IS ATTACHED TO DOOR WITH THRU BOLTS AND NUTS
• JAMB FLANGE IS SECURED TO FRAME WITH SCREWS
• STEEL MATERIAL
• NON- TEMPLATE
• NON-HANDED
• STANDARD SCREWS PACKED WITH HINGE
( 4 ) 5/16”-18 x 2 1/2” HEX. HEAD THRU BOLTS AND NUTS
( 5 ) 1/4-20 x 5/8” FLATHEAD CAP SCREWS
( 5 ) 1/4” EXTERNAL TOOTH COUNTERSUNK LOCK WASHERS
• HINGE LOCATION
2 HINGES ONE AT TOP, ONE AT BOTTOM
3 HINGES TWO AT TOP, ONE AT BOTTOM
4 HINGES TWO AT TOP, ONE AT BOTTOM,
ONE INTERMEDIATE
• CLAMP FLANGES ARE NOT ADJUSTABLE - THICKNESS OF THE DOOR MUST BE
INCLUDED ON ORDER
3044 HINGE SELECTION FOR MAXIMUM DOOR SIZE & WEIGHTS FOR
DOORS 7’-0” MINIMUM HEIGHT
3044 top view
3044
box clamp
door box clamp
“Over 125 Years of Quality” SH-17
Door Bumpers Heavy Duty
170 - 19
Door Bumper - Industrial Type
Materials
Spring Steel .125 Thick
ANSI K87434
Stainless Steel .109 Thick
ANSI K57434
170 - 32
Door Bumper - Industrial Type
Materials
Spring Steel .125 Thick
ANSI K87434
Stainless Steel .109 Thick
ANSI K57434
175 - 19
Door Bumper - Industrial Type
Materials
Spring Steel .125 Thick
ANSI K87434
Stainless Steel .109 Thick
ANSI K57434
175 - 32
Door Bumper - Industrial Type
Materials
Spring Steel .125 Thick
ANSI K87434
Stainless Steel .109 Thick
ANSI K57434
170/175 Series
• NON-HANDED
• BACK PLATE PROTECTS FACE OF DOOR FROM WEAR CAUSED BY SLIDING MOTION OF BUMPER
• SPECIFY DOOR THICKNESS FOR PROPER THRU BOLT LENGTH, UP TO 2 1/4” THICK DOOR
• AVAILABLE IN STAINLESS STEEL AND PRIME COAT ON STEEL
Below shows two ( 2 ) Bumpers installed back to back on one door.
Check the “L” ( length) of the bumper for the correct coverage required for
door width.
“Over 125 Years of Quality”
SH-18
Light Duty Double Acting Spring Hinges
Light Duty Series
1514
- LOUVER DOOR HINGE
FITS LOUVER DOORS 7/8” TO 1” THICK
ANSI K81243
1514H
- LOUVER DOOR HINGE
WITH HOLD OPEN FEATURE IN ONE DIRECTION
FITS LOUVER DOORS 7/8” TO 1” THICK
ANSI K81243
1515
- LOUVER DOOR HINGE
FITS LOUVER DOORS 1 1/8” TO 1 1/2” THICK
ANSI K81243
1515H
- LOUVER DOOR HINGE
WITH HOLD OPEN FEATURE IN ONE DIRECTION
FITS LOUVER DOORS 1 1/8” TO 1 1/2” THICK
ANSI K81243
• NON-HANDED
• NON-TEMPLATE
• STEEL MATERIAL
• DOOR FLANGE SURFACE APPLIED OR MORTISED
• JAMB FLANGE SURFACE APPLIED
• EASILY ADJUSTABLE SPRING TENSION
9700
- GATE HINGE
ANSI K84243
• NON-HANDED
• NON-ADJUSTABLE TENSION
• STEEL MATERIAL
• SURFACE APPLIED TO GATE AND JAMB
• FOR DOORS UP TO 1 1/8” THICK
• SIZE 2 3/4”
• ( 6 ) No. 7 x 3/4” WS, PER HINGE
12 HINGES PER CASE
8 lbs. AVERAGE WEIGHT PER CASE
Front View Top View
1514
NOTE:
MAXIMUM DOOR WIDTH - 18”
MAXIMUM DOOR WEIGHT - 18 lbs.
MINIMUM DOOR HEIGHT - 42”
“Over 125 Years of Quality”
Spring Pivots Horizontal Type
7800 SERIES
SP-1
7801 -
WITH FLOOR PLATE
LIGHT DUTY MODEL FOR USE WITH
DOORS UP TO 35 LBS.
ANSI K82193
7802
- WITH JAMB BRACKET
LIGHT DUTY MODEL FOR USE WITH
DOORS UP TO 35 LBS.
ANSI K82193
• CAST STEEL MECHANISM
• STEEL FRAME AND TRIM
• ANTI FRICTION BEARING
• DOUBLE ACTING
• HOLD OPEN AT APPROXIMATELY 75 DEGREES
• NON-ADJUSTABLE SPRING TENSION
• PACKED ONE SET PER BOX WITH WOOD SCREWS
• NON-HANDED
7801 Mechanism
7801 Side Plates
7800 SERIES RANGE OF MOTION
7801 & 7802 HOLD OPEN FEATURE
7811 & 7812 HOLD OPEN FEATURE
7813 & 7814 NO HOLD OPEN FEATURE
7813HD & 7814HD NO HOLD OPEN FEATURE
7821 & 7822 HOLD OPEN FEATURE
“Over 125 Years of Quality”
7811 -
WITH FLOOR PLATE
HOLD OPEN IN BOTH DIRECTIONS
MEDIUM DUTY MODEL FOR USE WITH DOORS UP TO 90 LBS.
ANSI K82193
7812 -
WITH JAMB BRACKET AND FLOOR PLATE
HOLD OPEN IN BOTH DIRECTIONS
MEDIUM DUTY MODEL FOR USE WITH DOORS UP TO 90 LBS.
ANSI K82193
7813 -
WITH FLOOR PLATE
NON-HOLD OPEN MODEL
MEDIUM DUTY MODEL FOR USE WITH DOORS UP TO 90 LBS.
ANSI K82193
7814 -
WITH JAMB BRACKET AND FLOOR PLATE
NON-HOLD OPEN MODEL
MEDIUM DUTY MODEL FOR USE WITH DOORS UP TO 90 LBS.
ANSI K82193
7813HD -
WITH FLOOR PLATE
HEAVY DUTY MODEL FOR USE WITH DOORS UP TO 150 LBS.
NON-HOLD OPEN MODEL
ANSI K82193
7814HD -
WITH JAMB BRACKET AND FLOOR PLATE
HEAVY DUTY MODEL FOR USE WITH DOORS UP TO 150 LBS.
NON-HOLD OPEN MODEL
ANSI K82193
7821 -
WITH FLOOR PLATE AND BRASS TRIM
HOLD OPEN IN BOTH DIRECTIONS
MEDIUM DUTY MODEL FOR USE WITH DOORS UP TO 90 LBS.
ANSI K82193
7822 -
WITH JAMB BRACKET, BRASS TRIM AND FLOOR PLATE
HOLD OPEN IN BOTH DIRECTIONS
MEDIUM DUTY MODEL FOR USE WITH DOORS UP TO 90 LBS.
ANSI K82193
• STEEL MECHANISM
• 7811, 7812, 7813, 7814 WITH STEEL TRIM
• 7821 & 7822 WITH SOLID BRASS TRIM
• ANTI FRICTION BEARING
• DOUBLE ACTING
• 7811, 7812, 7821 & 7822 HOLD OPEN AT APPROXIMATELY 75 to 90 DEGREES
• 7813, 7814, 7813HD & 7814HD ARE NON-HOLD OPEN
• 7813HD & 7814HD ARE FOR HEAVY DOOR LOW FREQUENCY APPLICATIONS
• ADJUSTABLE SPRING TENSION
• NON-HANDED
• PACKED ONE SET PER BOX WITH WOOD SCREWS
7811 Mechanism
NOTES:
THE 7813HD & 7814HD HEAVY DUTY PIVOT
FITS INTO THE SAME CUT OUT AT BOTTOM OF
DOOR AND USES THE SAME 7890 TOP PIVOT AS
THE 7801, 7802, 7813 AND 7814 FOR EASY
RETRO FIT.
THE 7890 TOP PIVOT, SIDE PLATES AND BACK
PLATES ARE INCLUDED IN ALL PIVOT SETS.
THE 7805 JAMB BRACKET IS ALSO INCLUDED
WITH MODELS 7802, 7812, 7814, 7814HD AND
7822.
Spring Pivots Horizontal Type
7800 SERIES
7805 - JAMB BRACKET
7890 - TOP PIVOT ASSEMBLY
SP-2
U.S. PATENT # 7,111,358
“Over 125 Years of Quality”
•
CAST STEEL BASE MATERIAL
• DOUBLE ACTING
• NON-ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 36”
THICKNESS - 2 1/2”
WEIGHT - 75 lbs.
• FITS DOORS NOT LESS THAN 1” THICK
• FLAT JAMB BRACKET - FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(8) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(2) No. 10 x 1” FLAT HEAD WOOD SCREWS
7012
- STEEL SURFACE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 26 lbs.
ANSI K63211
7022
- STEEL MORTISE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 26 lbs.
ANSI K63321
SP-3
Spring Pivots
7000 SERIES
NON-ADJUSTABLE SPRING TENSION
7022
7012
7014
- STEEL SURFACE PIVOT
BOX CLAMP DOOR BRACKET
6 PIVOTS PER CASE
CASE WEIGHT 28 lbs.
ANSI K63211
• CAST STEEL BASE MATERIAL
• DOUBLE ACTING
• NON-ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 36”
THICKNESS - 1 1/8”
WEIGHT - 75 lbs.
• BOX CLAMP FITS DOORS 1 1/8” THICK
• FLAT JAMB BRACKET - FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(6) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(4) THRU BOLTS AND NUTS
7014
“Over 125 Years of Quality”
SP-4
7100 SERIES
7112
- STEEL SURFACE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 28 lbs.
ANSI K63201
7122
- STEEL MORTISE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 28 lbs.
ANSI K63311
ADJUSTABLE SPRING TENSION
7122
7112
• CAST STEEL BASE MATERIAL
• DOUBLE ACTING
• ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 36”
THICKNESS - 2 1/2”
WEIGHT - 75 lbs.
• FITS DOORS NOT LESS THAN 1” THICK
• FLAT JAMB BRACKET - FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(8) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(2) No. 10 x 1” FLAT HEAD WOOD SCREWS
7114
- STEEL SURFACE PIVOT
BOX CLAMP DOOR BRACKET
6 PIVOTS PER CASE
CASE WEIGHT 30 lbs.
ANSI K63201
• CAST STEEL BASE MATERIAL
• DOUBLE ACTING
• ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 36”
THICKNESS - 1 1/8”
WEIGHT - 75 lbs.
• BOX CLAMP FITS DOORS 1 1/8” THICK
• FLAT JAMB BRACKET - FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(6) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(4) THRU BOLTS AND NUTS
7114
Spring Pivots
U.S. PATENT # 7,111,358
“Over 125 Years of Quality”
• BRASS
• DOUBLE ACTING
• NON-ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 30”
THICKNESS - 1 7/8”
WEIGHT - 50 lbs.
• FITS DOORS NOT LESS THAN 3/4” THICK
• FLAT JAMB BRACKET- FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• BOX CLAMP JAMB BRACKET FITS 1 1/8” AND 1 1/4” THICK JAMB ONLY
Spring Pivots
7200 SERIES
7211 -
BRASS SURFACE PIVOT
BOX CLAMP JAMB BRACKET
8 PIVOTS PER CASE
CASE WEIGHT 26 lbs.
ANSI K63213
NON-ADJUSTABLE SPRING TENSION
7212
- BRASS SURFACE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 20 lbs.
ANSI K63213
7211
7212
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(8) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(2) No. 10 x 1” FLAT HEAD WOOD SCREWS
(4) THRU-BOLTS FOR BOX CLAMP
INSTRUCTIONS TO REACTIVATE
7100 AND 7300 SERIES PIVOTS
If a pivot fails to close the door in one or
both direction , the unit can be reacti-
vated as follows:
( 1 ) Remove pin from tension collar.
( 2 ) Remove the pivot from the door and
bracket.
( 3 ) Viewing the pivot from the threaded
end, ( see figure “1” ) and with the
mounting bracket toward you , turn the
tension collar to the left ( counterclock-
wise ) until it comes to a stop. Hold the
tension collar in this position while
turning the threaded spindle to the right
( clockwise ) until it comes to a stop.
( 4 ) Place the threaded spindle in a vise,
gripping it on the 1/2” Dia. ( see figure “2” )
so the spindle is horizontal and mounting
bracket is still toward you.
( 5 ) Place the tension rod in tension collar
hole near the cover plate stop ( A ) and turn
the collar toward you ( counterclockwise )
until spring tension is felt.
Insert the tension pin into the hole in the
tension collar close to the stop ( A ) on the
cover plate. Pin must be inserted fully into
the hole with the shoulder of the pin
against the tension collar allow the spring
tension to rotate the collar and tension pin
toward the stop ( A ) until the pin contacts
the stop. Reinstall on door.
NOTE:
PLEASE SPECIFY
STYLE OR JAMB THICKNESS
WHEN ORDERING 7211
SP-5
“Over 125 Years of Quality”
SP-6
7312
- BRASS SURFACE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 36 lbs.
ANSI K13201
7322
- BRASS MORTISE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 36 lbs.
ANSI K13311
• BRASS
• DOUBLE ACTING
• ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 36”
THICKNESS - 2 1/2”
WEIGHT - 75 lbs.
• FITS DOORS NOT LESS THAN 1” THICK
• FLAT JAMB BRACKET - FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(8) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(2) No. 10 x 1” FLAT HEAD WOOD SCREWS
Spring Pivots
7300 SERIES
ADJUSTABLE SPRING TENSION
7313
7322
7314
7313
- BRASS SURFACE PIVOT
BOX CLAMP DOOR AND JAMB BRACKETS
6 PIVOTS PER CASE
CASE WEIGHT 46 lbs.
ANSI K13201
7314
- BRASS SURFACE PIVOT
BOX CLAMP DOOR BRACKET
6 PIVOTS PER CASE
CASE WEIGHT 44 lbs.
ANSI K13201
• BRASS
• DOUBLE ACTING
• ADJUSTABLE SPRING TENSION
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 36”
THICKNESS - 1 1/8”
WEIGHT - 75 lbs.
• DOOR BOX CLAMP FITS DOORS 1 1/8” THICK
• FLAT JAMB BRACKET - FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• JAMB BOX CLAMP FITS JAMBS 1 1/8” OR 1 1/4” THICK
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(6) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(8) THRU-BOLTS AND NUTS FOR 7313
(4) THRU-BOLTS AND NUTS FOR 7314
7312
NOTE:
PLEASE SPECIFY
STYLE OR JAMB THICKNESS
WHEN ORDERING 7313
U.S. PATENT # 7,111,358
“Over 125 Years of Quality” SP-7
Gravity Pivots
7400 SERIES
7512
- STANDARD PIVOT
7512-H
- HOLDS DOOR OPEN AT 90 DEGREES
20 PIVOTS PER CASE- CASE WEIGHT 17 lbs.
• STEEL
• DOUBLE ACTING
• DOOR WEIGHT CLOSES DOOR - NO SPRING
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 30”
THICKNESS - 1 5/8”
WEIGHT - 50 lbs.
• FITS JAMBS NOT LESS THAN 1 1/4” WIDE
7411
7412
7514
7512
7500 SERIES
FOR LOUVER DOORS
7411 -
BRASS SURFACE PIVOT
BOX CLAMP JAMB BRACKET
8 PIVOTS PER CASE
CASE WEIGHT 20 lbs.
ANSI K22011
7412
- BRASS SURFACE PIVOT
8 PIVOTS PER CASE
CASE WEIGHT 18 lbs.
ANSI K22011
NOTE:
PLEASE SPECIFY
STYLE OR JAMB THICKNESS
WHEN ORDERING 7411
• BRASS
• DOUBLE ACTING
• DOOR WEIGHT CLOSES DOOR - NO SPRING
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 30”
THICKNESS - 1 7/8”
WEIGHT - 35 lbs.
• FITS DOORS NOT LESS THAN 3/4” THICK
• FLAT JAMB BRACKET- FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• BOX CLAMP JAMB BRACKET FITS 1 1/8” AND 1 1/4” THICK JAMB ONLY
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(8) No. 12 x 1 1/4” FLAT HEAD WOOD SCREWS
(2) No. 10 x 1” FLAT HEAD WOOD SCREWS
(4) THRU-BOLTS FOR BOX CLAMP
7514
- STANDARD PIVOT
BOX CLAMP DOOR BRACKET
7514-H
- HOLDS DOOR OPEN AT 90 DEGREES
BOX CLAMP DOOR BRACKET
10 PIVOTS PER CASE- CASE WEIGHT 20 lbs.
• STEEL
• DOUBLE ACTING
• DOOR WEIGHT CLOSES DOOR - NO SPRING
• NON-HANDED
• MAXIMUM DOOR SIZE
WIDTH - 30”
THICKNESS - 3/4”
WEIGHT - 50 lbs.
• FITS JAMBS NOT LESS THAN 1 1/4” WIDE
• DOOR BOX CLAMP - FITS DOORS 3/4” THICK
Gravity Pivots
• STANDARD PACKAGING ONE SET PER BOX
(1) PIVOT WITH BOTTOM JAMB BRACKET
(1) TOP PIVOT WITH JAMB BRACKET
(8) No. 10 x 1” FLAT HEAD WOOD SCREWS
(4) THRU-BOLTS FOR BOX CLAMP
U.S. PATENT # 7,013531
“Over 125 Years of Quality”
Auxiliary Springs
2000 SERIES
SP-8
2400
STEEL
2410
STEEL
Wrought Steel Heads
Adjustable Spring Tension
Economical Closing Device
Maximum Door Weight 50 lbs.
ANSI K87444
2430
STEEL
2440
STEEL
Wrought Steel Heads
Adjustable Spring Tension
Economical Closing Device
Maximum Door Weight 50 lbs.
ANSI K87444
2500
STEEL
2510
STEEL
2520
STEEL
Wrought Steel Heads
Adjustable Spring Tension
Economical Closing Device
Maximum Door Weight 50 lbs.
ANSI K87454
NOTE FOR ALL AUXILIARY SPRINGS : DO NOT APPLY MORE THAN 3 HOLES TENSION
Screen Door Spring Hinges
2100
FULL SURFACE, STEEL
Adjustable Tension with Button Tips
Available with Reverse Spring ( R2100 )
Size : 3” x 3” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 25 lbs.
ANSI K84223
2200
HALF SURFACE, STEEL
Adjustable Tension with Button Tips
Available with Reverse Spring ( R2200 )
Size : 3” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 23 lbs.
ANSI K84233
2200
2100
2000 SERIES
“Over 125 Years of Quality”
2960
2970
2980
2990
SP-9
2920
FULL SURFACE, STEEL
Adjustable Tension with Loose Pin
Size : 2 3/4” x 2 3/4” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) No. 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 15 lbs.
2930
HALF SURFACE, STEEL
Adjustable Tension with Loose Pin
Size : 2 3/4” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 20 lbs.
2960
FULL SURFACE, STEEL
Non-Adjustable Tension with Loose Pin
Size : 2 3/4” x 2 3/4” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 64 lbs.
2970
HALF SURFACE, STEEL
Non-Adjustable Tension with Loose Pin
Size : 2 3/4” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 33 lbs.
2980
FULL SURFACE, STEEL
Adjustable Tension with Button Tip
Size : 2 3/4” x 2 3/4” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 20 lbs.
2990
HALF SURFACE, STEEL
Adjustable Tension with Button Tip
Size : 2 3/4” ( 3 Hinges Maximum Door Weight 50 lbs.)
Standard Packaging ( 2 ) Per Box
( 6 ) 7 x 3/4” Wood Screws Per Hinge
( 40 ) Hinges Per Case
Average Weight Per Case 20 lbs.
Screen Door Spring Hinges
2000 SERIES
2920
2930
“Over 125 Years of Quality”
Lavatory Hardware - Door Latches and Bolts
15000 SERIES
SP-10
Wrought Brass
Base Plate - 1 1/2” wide x 2” high
Latch Bar - 3 1/4” long x 7/8” wide x 5/32” thick
Keeper - 1 1/2” wide x 2” high
Standard Packaging One Set Per Box
( 8 ) No. 8 x 3/4” Wood Screws Per Set
( 36 ) Per Case
Average Weight Per Case 23 lbs.
15009
RIM BOLT and KEEPER
Wrought Brass
Base Plate - 2” long x 2” high
Latch Bolt - 9/16” wide x 5/32” thick x 3/4” throw
Keeper - 1/2” wide x 2’ high
Standard Packaging One Sets Per Box
( 6 ) No. 8 x 3/4” Wood Screws Per Set
( 20 ) Per Case
Average Weight Per Case 24 lbs.
Wrought Brass
Base Plate - 2” wide x 2” high
Latch Bar - 5” long x 1 1/4” wide x 1/4” thick
Keeper - 2” wide x 2” high
Standard Packaging One Set Per Box
( 8 ) No. 8 x 3/4” Wood Screws Per Set
( 12 ) Per Case
Average Weight Per Case 12 lbs.
15019
RIM BOLT and KEEPER
15000
THROW LATCH and KEEPER
15001
THROW LATCH and KEEPER
15004
RIM BOLT and KEEPER
Cast Brass
Base Plate - 2 9/16” long x 2 1/2’ high
Latch Bolt - 7/8” wide x 1/4” thick x 7/16” throw
Keeper - 1 1/4” wide x 2” high
Standard Packaging One Set Per Box
( 6 ) No. 8 x 3/4” Wood Screws Per Set
( 36 ) Per Case
Average Weight Per Case 27 lbs.
15009H
RIM BOLT and KEEPER
Same as 15009 Except with Handicap Type Handle
Same as 15009 Except with Extended Spindle
for use with 15015 or 15016 indicator
Specify Door Thickness When Ordering
Standard Packaging One Set Per Box
( 6 ) No. 8 x 3/4” Wood Screws Per Set
( 20 ) Per Case
Average Weight Per Case 27 lbs.
15019H
RIM BOLT and KEEPER
Same as 15009 Except with Handicap Type Handle
Specify Door Thickness When Ordering
15000
15001
15004
15009
15009H
“Over 125 Years of Quality”
15015
INDICATOR
For use with 15019 and 15019H Only
Brass
Diameter - 2 13/16”
Spanish Part Number is 15016F
Standard Packaging One Per Box
( 3 ) No. 8 x 3/4” Wood Screws Per Indicator
( 20 ) Per Case
Average Weight Per Case 3 lbs.
15016
INDICATOR
For use with 15019 and 15019H Only
Brass
Diameter - 2 13/16”
Emergency Keyhole on Outside of Door
Spanish Part Number is 15016F
Emergency Key Not Included
Standard Packaging One Per Box
( 3 ) No. 8 x 3/4” Wood Screws Per Indicator
( 20 ) Per Case
Average Weight Per Case 3 lbs.
15017
EMERGENCY KEY
For use with 15016 Indicator
15020
DOOR PULL
Cast Brass
Center to Center - 4”
Overall Length - 4 5/8”
Projection - 1 1/8”
Standard Packaging One Per Box
( 4 ) No. 8 x 3/4” Wood Screws Per Pull
( 20 ) Per Case
Average Weight Per Case 9 lbs.
15030
COAT and HAT HOOK
Cast Brass
Rubber Bumper
Base Diameter - 2”
Projection - 3 3/4”
Standard Packaging One Per Box
( 3 ) No. 8 x 3/4” Wood Screws Per Hook
( 36 ) Per Case
Average Weight Per Case 21 lbs.
Lavatory Hardware - Indicators and
Miscellaneous Items 15000 SERIES
SP-11
15015
15030
15020
15016
“Over 125 Years of Quality”
1055
BRASS DOOR STOP and KEEPER
1055-P
( PIVOT HUNG )
Use with Rim Bolt 15004 or 15009
For Inswinging Doors Only
Standard Packaging One Per Box
( 2 ) Thru Bolts and Nuts
( 6 ) Per Case
• Clamp Flange Jamb Bracket
• Rubber Bumper on Stop
• Non-Handed
1057
BRASS DOOR STOP and KEEPER
1057-P
( PIVOT HUNG )
Use with Rim Bolt 15004 or 15009
For Outswinging Doors Only
Standard Packaging One Per Box
( 2 ) Thru Bolts and Nuts
( 6 ) Per Case
• Clamp Flange Jamb Bracket
• Rubber Bumper on Stop
• Non-Handed
Lavatory Hardware - Door Strikes and Keepers
CLAMP TYPE 1050 SERIES
SP-12
FLAT TYPE 1070 SERIES
1070
BRASS DOOR STOP
Mounted on Door Face
Door Stop Only No Keeper
Standard Packaging One Per Box
( 20 ) Per Case
1072
BRASS DOOR STOP
Mounted on Jamb Face
Door Stop Only No Keeper
Standard Packaging One Per Box
( 20 ) Per Case
• Rubber Bumper on Stop
• Non-Handed
When Ordering Please Specify
Door and Jamb Thickness
Type Door Mounting ( Pivot or Hinge)
Type Door Bolt to be Used With Keeper
1074
BRASS DOOR STOP and KEEPER
For Inswinging Doors Only
Standard Packaging One Per Box
( 20 ) Per Case
1075
BRASS DOOR STOP and KEEPER
For Outswinging Doors Only
Standard Packaging One Per Box
( 20 ) Per Case
1070
1072
1074
1055
1057
1075
• Rubber Bumper on Stop
• Non-Hande
• Door Stops and Keepers are Available for Doors 3/4”, 7/8”, 1”, 1 1/8”, 1 1/4” Thick
• Use with Rim Bolt 15004 or 15009
“Over 125 Years of Quality”
Lavatory Hardware - Partition Mounting Brackets
1140 SERIES
1141-1
DOUBLE FLANGE MOUNTING BRACKET
3/4” Thick Partition Only
Standard Packaging One Per Box
( 4 ) Thru Bolts and AJ”S
( 20 ) Per Case
1141-2
SINGLE FLANGE MOUNTING BRACKET
3/4” Thick Partition Only
Standard Packaging One Per Box
( 4 ) Thru Bolts and AJ”S
( 20 ) Per Case
1141-3
“L” BRACKET
Standard Packaging One Per Box
( 4 ) Thru Bolts and AJ”S
( 20 ) Per Case
1141-4
“U” BRACKET
3/4” Thick Partition Only
Standard Packaging One Per Box
( 4 ) Thru Bolts and AJ”S
( 20 ) Per Case
SP-13
1142-3
PILASTER COVER & SHOE
3/4” Thick Partition Only
Standard Packaging One Set Per Box
Thru Bolts, Leveling Nuts and AJ”S
( 20 ) Per Case
1142-6
PILASTER COVER & SHOE
3/4” Thick Partition Only
Standard Packaging One Set Per Box
Thru Bolts, Leveling Nuts and AJ”S
( 8 ) Per Case
1142-8
PILASTER COVER & SHOE
3/4” Thick Partition Only
Standard Packaging One Set Per Box
Thru Bolts, Leveling Nuts and AJ”S
( 8 ) Per Case
1142-12
PILASTER COVER & SHOE
3/4” Thick Partition Only
Standard Packaging One Set Per Box
Thru Bolts, Leveling Nuts and AJ”S
( 4 ) Per Case
• Wrought Brass Pilaster Cover
• Stainless Steel Shoe
• Height 3”
• Available for 3”, 6”, 8”, & 12” Wide Pilasters
1141-1
1141-2
1141-3
1141-4
Cast Brass
Height 1 1/2”
Projection 3 5/16”
“Over 125 Years of Quality”
Lavatory Hardware - Spring Hinges Single Acting
SP-14
1000 SERIES
LB1002-400
- FULL SURFACE
BRASS
LB1002-400H
- FULL SURFACE HOLD OPEN
BRASS
LB1006-400
- FULL SURFACE
STAINLESS STEEL
LB1006-400H
- FULL SURFACE HOLD OPEN
STAINLESS STEEL
• NON-HANDED
• SIZE ( 4” X 4” )
• 1/4” RADIUS CORNERS
• ADJUSTABLE SPRING TENSION
• 2 BACKPLATES FURNISHED WITH EACH HINGE
• STANDARD PACKAGING ONE PER BOX
( 4 ) THRU BOLTS AND NUTS PER HINGE
( 20 ) HINGES PER CASE AVERAGE WEIGHT PER CASE 15 lbs.
1001
- ADJUSTABLE CLAMP FLANGE FOR DOOR AND JAMB
BRASS
• SIZE ( 4” HIGH CLAMP FLANGE )
• ADJUSTABLE SPRING TENSION
• AVAILABLE WITH HOLD OPEN ( 1001-H )
• AVAILABLE FOR DOORS AND JAMBS 7/8” TO 1 3/4” THICK
• STANDARD PACKAGING TWO PER BOX
( 4 ) THRU BOLTS AND NUTS PER HINGE
( 16 ) HINGES PER CASE AVERAGE WEIGHT PER CASE 40 lbs.
• SPECIFY DOOR AND JAMB THICKNESS
01001
- ADJUSTABLE CLAMP FLANGE FOR DOOR AND JAMB
BRASS
• NON-HANDED
• SIZE ( 2” HIGH CLAMP FLANGE )
• SPRINGLESS HIINGE ( NO SPRING )
• USE WITH 1001 SPRING HINGE ON LIGHT WEIGHT DOORS
• AVAILABLE FOR DOORS AND JAMBS 7/8” TO 1 3/4” THICK
• STANDARD PACKAGING TWO PER BOX
( 4 ) THRU BOLTS AND NUTS PER HINGE
( 16 ) HINGES PER CASE AVERAGE WEIGHT PER CASE 30 lbs.
• SPECIFY DOOR AND JAMB THICKNESS
• USE WITH TYPE 1001 SPRING HINGE ON LIGHT WEIGHT DOORS
1011
- FULL SURFACE
HEAVY DUTY BRASS CASTING
• LENGTH OF FLANGE 4”
• ADJUSTABLE SPRING TENSION
• AVAILABLE WITH HOLD OPEN ( 1011-H )
• STANDARD PACKAGING ( 2 ) PER BOX
( 6 ) 1/4 - 20 x 3/4” MACHINE SCREWS PER HINGE
( 24 ) HINGES PER CASE AVERAGE WEIGHT PER CASE 30 lbs.
“Over 125 Years of Quality” GH-1
Continuous Geared Aluminum Hinge
What Is a Continuous Geared Aluminum Hinge
• Unlike a conventional hinge, a Continuous Geared Aluminum Hinge has no pin. Also it is not like a
piano hinge either, which has 50% of each knuckle cut away, and depends on a thin wire to hold
each leaf together.
• A Continuous Geared Aluminum Hinge consists of two full-height geared leafs. Each geared leaf
rotates evenly from top to bottom, riding on high strength nylon bearings. The geared leafs and
bearings are held together by a full-length channel cap. This assembly retains the smooth, clean
lines of the door and frame, while easily supporting heavy vertical loads.
Cycle Tested
• Bommer’s full line of Continuous Geared Aluminum Hinges has completed
testing using a standard duty hinge and a 150 lb. door, and are now certified
fully functional after 1.5 million cycles.
UL-Fire Labeled 3 Hour A-Label
• Bommer’s full line of Continuous Geared Aluminum Hinges are certified by Underwriters Laboratories Inc.
®
(U.S.A. and Canada)
for up to a 3 Hour Fire Listing for all 4'-0" x 10'-0" and 8'-0" x 10'-0" door and frame assemblies.
• Special Pins may be required for some rated assemblies. Please refer to page GH-4 and GH-5 for illustrations and information
regarding the application of Pins for fire rated assemblies.
Security, Safety, Privacy, Low Wear & Tear
• Unlike conventional hinges, Continuous Geared Aluminum Hinges distribute load stress uniformly along the full length of the door
and frame, diffusing wear and tear from closer kickback shock and eliminating door sag and binding.
• The gear design ensures identical operation of each leaf; therefore very little effort is required to open heavy commercial doors.
• The attaching screws for all hinges are located along the full length of each hinge. Preventing warp age of the door along the jamb.
• Continuous Geared Aluminum Hinges creates a high degree of security for any opening or restricted area. The geared
construction and the full length channel cap seal the common gap between the door and frame provides security against prying.
• Closing the common gap between the door and frame provides safety against pinched fingers for doors in public areas,
particularly those areas where children are present.
• The sight proof design of the Continuous Geared Aluminum Hinge provides privacy in lavatories, executive’s offices, exam rooms,
and file rooms.
• Bommer Continuous Geared Aluminum Hinge products are GUARANTEED FOR THE LIFE OF THE OPENING against defects in
material or workmanship.
“Over 125 Years of Quality”
Full-Mortise Hinge
The full-mortise hinge is designed mainly for new door application, and
is applied so as to conceal both leaves.
The Full-Mortise Applications
New Construction
:
New door and frame
Renovations
: (all full-mortise hinges will cover existing standard hinge preps)
•
New door and frame
•
New door with existing frame
•
Existing door with new frame
The Full Mortise Fasteners
All fasteners are #12-24 x 7/16 Type C, FHUC screws (phillips, flat head, undercut screw, 7/16" long, that forms its own 12-24 thread).
•
WOOD SCREWS on request only (specify on order)
SHORT LEAF INSET
FM83SLI-(Finish)
FM83SLI-HD-(Finish)
FM85SLI-(Finish)
FM85SLI-HD-(Finish)
FM95SLI-(Finish)
FM95SLI-HD-(Finish)
FM120SLI-(Finish)
FM120SLI-HD-(Finish)
SHORT LEAF FLUSH
FM83SLF-(Finish)
FM83SLF-HD-(Finish)
FM85SLF-(Finish)
FM85SLF-HD-(Finish)
FM95SLF-(Finish)
FM95SLF-HD-(Finish)
FM120SLF-(Finish)
FM120SLF-HD-(Finish)
GH-2
STANDARD
FM83-(Finish)
FM83HD-(Finish)
FM85-(Finish)
FM85HD-(Finish)
FM95-(Finish)
FM95HD-(Finish)
FM120-(Finish)
FM120HD-(Finish)
Continuous Geared Aluminum Hinge
Full Mortise Door Clearances Full Surface Door Clearances Half Surface Door Clearances
“Over 125 Years of Quality”
The Half-Surface Applications
New Construction
:
New door and frame
Renovations / Retrofit
: (all half surface hinges will cover existing
standard hinge preps.)
•
New door and frame
•
New door with existing frame
•
Existing door with new frame
•
Existing door with existing frame
The Full Surface Fasteners
Frame Portion
All fasteners are #12-24 x 7/16 Type C, FHUC screws
(phillips, flat head, undercut screw, 7/16" long, that forms
its own 12-24 thread).
•
WOOD SCREWS on request only (specify on order)
Door Portion
Thru-Bolts are 1/4 - 20 thread x 1 5/8" long, with a low
profile head.
Shoulder Bolts, used in conjunction with the Thru-Bolts,
are pancake head hex socket, 1/4 - 20 thread, 1" long.
The hex socket allows for a certain degree of security.
Pan Head Self Drilling Screws are # 12 x 3/4" long, and tap
their own threads into the metal. The installation instruc-
tions fully describe their use for initially attaching the hinge
to the door for clearance and alignment adjustments.
•
heavy duty hinges - 4 required
Half-Surface Hinge
The half surface hinge is designed mainly for retrofitting, the door
leaf is applied to the exposed surface of the door, and the frame
leaf is applied to the concealed surface of the frame rabbet.
The Half-Surface Fasteners
Frame Portion
All fasteners are #12-24 x 7/16 Type C, FHUC screws (phillips, flat
head, undercut screw, 7/16" long, that forms its own 12-24
thread).
•
heavy duty hinges 20 required
•
WOOD SCREWS on request only (specify on order)
Door Portion
Thru-Bolts are 1/4 - 20 thread x 1 5/8" long, with a very shallow
head.
•
heavy duty hinges - 8 required
Shoulder Bolts, used in conjunction with the Thru-Bolts, are
pancake head hex socket, 1/4 - 20 thread, 1" long.
The hex socket allows for a certain degree of security.
•
heavy duty hinges - 8 required
Pan Head Self Drilling Screws are #12 x 3/4" long, and tap their
own threads into the metal. The installation instructions fully
describe their use for initially attaching the hinge to the door for
clearance and alignment adjustments.
•
heavy duty hinges - 4 required
Full Surface Hinge
The full surface hinge is designed mainly for retrofitting,
and is applied to the exposed surface of the door and
frame.
The Full Surface Applications
New Construction
:
New door and frame
Renovations / Retrofit
:
•
New door and frame
•
New door with existing frame
•
Existing door with new frame
•
Existing door with existing frame
HALF SURFACE
HS83-(Finish)
HS83HD-(Finish)
HS85-(Finish)
HS85HD-(Finish)
HS95-(Finish)
HS95HD-(Finish)
HS120-(Finish)
HS120HD-(Finish)
FULL SURFACE
FS83-(Finish)
FS83HD-(Finish)
FS85-(Finish)
FS85HD-(Finish)
FS95-(Finish)
FS95HD-(Finish)
FS120-(Finish)
FS120HD-(Finish))
GH-3
Continuous Geared Aluminum Hinge
“Over 125 Years of Quality”
Full Mortise Hinge
Bommer Roton Select Markar Stanley Zero
FM83-628 780-224, 83" CL SL24A-83 FM-611A, 83" 521
FM83HD-628 780-224HD, 83" CL SL24A-HD-83 FM-611A, HD-83" 521
FM83-393 780-224, 83" BRZ SL24D-83 FM-611D, 83" 527
FM83HD-393 780-224HD, 83" BRZ SL24D-HD-83 FM-611D, HD-83" 527
FM85-628 780-224, 85" CL SL24A-85 FM-611A, 85"
FM85HD-628 780-224HD, 85" CL SL24A-HD-85 FM-611A, HD-85"
FM85-393 780-224, 85" BRZ SL24D-85 FM-611D, 85"
FM85HD-393 780-224HD, 85" BRZ SL24D-HD-85 FM-611D, HD-85"
FM95-628 780-224, 95" CL SL24A-95 FM-611A, 95" 523
FM95HD-628 780-224HD, 95" CL SL24A-HD-95 FM-611A, HD-95" 523
FM95-393 780-224, 95" BRZ SL24D-95 FM-611D, 95" 528
FM95HD-393 780-224HD, 95" BRZ SL24D-HD-95 FM-611D, HD-95" 528
FM120-628 780-224, 120" CL SL24A-120 FM-611A, 120" 525
FM120HD-628 780-224HD, 120" CL SL24A-HD-120 FM-611A, HD-120" 525
FM120-393 780-224, 120" BRZ SL24D-120 FM-611D, 120" 529
FM120HD-393 780-224HD, 120" BRZ SL24D-HD-120 FM-611D, HD-120" 529
Full Mortise Hinge Short Leaf Flush
Bommer Roton Select Markar Stanley Zero
FM83-SLF-628 780-112, 83" CL SL11A-83 FM-600A, 83" 501 910A-83
FM83HD-SLF-628 780-112HD, 83" CL SL11A-HD-83 FM-600A, HD-83" 501 910A-DB-83
FM83-SLF-393 780-112, 83" BRZ SL11D-83 FM-600D, 83" 507 910D-83
FM83HD-SLF-393 780-112HD, 83" BRZ SL11D-HD-83 FM-600D, HD-83" 507 910D-DB-83
FM85-SLF-628 780-112, 85" CL SL11A-85 FM-600A, 85" 910A-85
FM85HD-SLF-628 780-112HD, 85" CL SL11A-HD-85 FM-600A, HD-85" 910A-DB-85
FM85-SLF-393 780-112, 85" BRZ SL11D-85 FM-600D, 85" 910D-85
FM85HD-SLF-393 780-112HD, 85" BRZ SL11D-HD-85 FM-600D, HD-85" 910D-DB-85
FM95-SLF-628 780-112, 95" CL SL11A-95 FM-600A, 95" 503 910A-95
FM95HD-SLF-628 780-112HD, 95" CL SL11A-HD-95 FM-600A, HD-95" 503 910A-DB-95
FM95-SLF-393 780-112, 95" BRZ SL11D-95 FM-600D, 95" 508 910D-95
FM95HD-SLF-393 780-112HD, 95" BRZ SL11D-HD-95 FM-600 HD-95" 508 910D-DB-95
FM120-SLF-628 780-112, 120" CL SL11A-120 FM-600A, 120" 505 910A-120
FM120HD-SLF-628 780-112HD, 120" CL SL11A-HD-120 FM-600A, HD-120" 505 910A-DB-120
FM120-SLF-393 780-112, 120" BRZ SL11D-120 FM-600D, 120" 509 910D-120
FM120HD-SLF-393 780-112HD, 120" BRZ SL11D-HD-120 FM-600D, HD-120" 509 910D-DB-120
GH-4
FirePins ™ Locations
The locations illustrated below indicate where holes should be drilled on the hinge edge of the door.
These locations are appropriate for all hinge models (full-mortise, full-surface, and half-surface).
Continuous Geared Aluminum Hinge
Product Cross Reference Chart
FirePins ™ for use with Fire Rated Assemblies
• Although Bommer Continuous Geared Aluminun Hinges carry the UL Fire Rating, the
highest in the industry, some applications may require the use of FirePins
™
.
• FirePin
™
applications fall with in the UL guidelines for retrofitting assemblies in the
field. Expensive shop modifications and door/frame reinforcements are not required.
• Intumescent material is encased in each FirePin
™
for wood door applications to
insulate against charring the door edge via heat transfer from the frame. FirePins
™
also add extra security to a door assembly.
“Over 125 Years of Quality” GH-5
Product Cross Reference Chart
Full Mortise Hinge Short Leaf Inset
Bommer Roton Select Markar Stanley Zero
FM83-SLI-628 780-111, 83" CL SL18A-83
FM83HD-SLI-628 780-111HD, 83" CL SL18A-HD-83
FM83-SLI-393 780-111, 83" BRZ SL18D-83
FM83HD-SLI-393 780-111HD, 83" BRZ SL18D-HD-83
FM85-SLI-628 780-111, 85" CL SL18A-85
FM85HD-SLI-628 780-111HD, 85" CL SL18A-HD-85
FM85-SLI-393 780-111, 85" BRZ SL18D-85
FM85HD-SLI-393 780-111HD, 85" BRZ SL18D-HD-85
FM95-SLI-628 780-111, 95" CL SL18A-95
FM95HD-SLI-628 780-111HD, 95" CL SL18A-HD-95
FM95-SLI-393 780-111, 95" BRZ SL18D-95
FM95HD-SLI-393 780-111HD, 95" BRZ SL18D-HD-95
FM120-SLI-628 780-111, 120" CL SL18A-120
FM120HD-SLI-628 780-111HD, 120" CL SL18A-HD-120
FM120-SLI-393 780-111, 120" BRZ SL18D-120
FM120HD-SLI-393 780-111HD, 120" BRZ SL18D-HD-120
Continuous Geared Aluminum Hinge
Half Surface Hinges
Bommer Roton Select Markar Stanley Zero
HS83-628 780-054 83" CL SL54A-83 HS-609A, 83" 551 920A-83
HS83HD-628 780-054HD 83" CL SL54A-HD-83 HS-609A, HD-83" 551 920A-DB-83
HS83-393 780-054, 83" BRZ SL54D-83 HS-609D, 83" 557 920D-83
HS83HD-393 780-054HD, 83" BRZ SL54D-HD-83 HS-609D, HD-83" 557 920D-DB-83
HS85-628 780-054, 85" CL SL54A-85 HS-609A, 85" 920A-85
HS85HD-628 780-054HD, 85" CL SL54A-HD-85 HS-609A, HD-85" 920A-DB-85
HS85-393 780-054, 85" BRZ SL54D-85 HS-609D, 85" 920D-85
HS85HD-393 780-054HD, 85" BRZ SL54D-HD-85 HS-609D, HD-85" 920D-DB-85
HS95-628 780-054, 95" CL SL54A-95 HS-609A, 95" 553 920A-95
HS95HD-628 780-054HD, 95" CL SL54A-HD-95 HS-609A, HD-95" 553 920A-DB-95
HS95-393 780-054, 95" BRZ SL54D-95 HS-609D, 95" 558 920D-95
HS95HD-393 780-054HD, 95" BRZ SL54D-HD-95 HS-609D, HD-95" 558 920D-DB-95
HS120-628 780-054, 120" CL SL54A-120 HS-609A, 120" 555 920A-120
HS120HD-628 780-054HD, 120" CL SL54A-HD-120 HS-609A, HD-120" 555 920A-DB-120
HS120-393 780-054, 120" BRZ SL54D-120 HS-609D, 120" 559 920D-120
HS120HD-393 780-054HD, 120" BRZ SL54D-HD-120 HS-609D, HD-120" 559 920D-DB-120
Full Surface Hinges
Bommer Roton Select Markar Stanley Zero
FS83-628 780-210, 83" CL SL21A-83 FS/SC-609A, 83" 511 930A-83
FS83HD-628 780-210HD, 83" CL SL21A-HD-83 FS/SC-609A, HD-83" 511 930A-DB-83
FS83-393 780-210, 83" BRZ SL21D-83 FS/SC-609D, 83" 517 930D-83
FS83HD-393 780-210HD, 83" BRZ SL21D-HD-83 FS/SC-609D, HD-83" 517 930D-DB-83
FS85-628 780-210, 85" CL SL21A-85 FS/SC-609A, 85" 930A-85
FS85HD-628 780-210HD, 85" CL SL21A-HD-85 FS/SC-609A, HD-85" 930A-DB-85
FS85-393 780-210, 85" BRZ SL21D-85 FS/SC-609D, 85" 930D-85
FS85HD-393 780-210HD, 85" BRZ SL21D-HD-85 FS/SC-609D, HD-85" 930D-DB-85
FS95-628 780-210, 95" CL SL21A-95 FS/SC-609A, 95" 513 930A-95
FS95HD-628 780-210HD, 95" CL SL21A-HD-95 FS/SC-609A, HD-95" 513 930A-DB-95
FS95-393 780-210, 95" BRZ SL21D-95 FS/SC-609D, 95" 518 930D-95
FS95HD-393 780-210HD, 95" BRZ SL21D-HD-95 FS/SC-609D, HD-95" 518 930D-DB-95
FS120-628 780-210, 120" CL SL21A-120 FS/SC-609A, 120" 515 930A-120
FS120HD-628 780-210HD, 120" CL SL21A-HD-120 FS/SC-609A, HD-120" 515 930A-DB-120
FS120-393 780-224, 120" BRZ SL21D-120 FS/SC-609D, 120" 519 930D-120
FS120HD-393 780-224HD, 120" BRZ SL21D-HD-120 FS/SC-609D, HD-120" 519 930D-DB-120
“Over 125 Years of Quality”
