Bontec BONTEC-T016 Remote Keyless Entry User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	330954
Application ID	Ft6Co2hHTyT2UGvv3sdk0g==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.92kB (48995 bits)
Date Submitted	2003-06-09 00:00:00
Date Available	2003-06-06 00:00:00
Creation Date	2003-05-30 11:13:18
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-05-30 11:13:18
Document Title	users manual

Remote Keyless Entry
(BONTEC-T016,
BONTEC-E016)
BONTEC Co., Ltd.
#27-31, HANCHUN-RI, DUCK-SAN -MYUN,, JINCHUN-GUN,CHUNG-BUK,KOREA
FCC COMPLIANCE STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION;
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED
OPERATION.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
USER MANUAL
NAME: REMOTE KEYLESS ENTRY SYSTEM
This RKE System is to be installed on motor vehicles as OE (Origianal Equipment) item
It is intended for auto-locking/unlocking of the door
SYSTEM CONSTRUCTION
SYSTEM IN VEHICLE
Antenna
Door actuator
LOCK
UnLock
Button
Button
B/Glass
Panic
Button
Signal
Button
ETACS
12V
OPERATING SUMMARY
1. By the driver of the vehicle, TRNSMITTER's button is pushed.
2. TRANSMITTER sends appropriate CODE by RF frequency.
3. ETACS gets the code and decodes it.
4. When Rx proves it to be the right code, ETACS control Door relay
5. ETACS receive it, and drive the actuator.
The system has the function as follow:
- Whenever DATA is sended to ETACS, LED is turned 'ON'.
1) LOCK & UNLOCK
If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.
2) REAR GLASS OPEN
IF REAR GLASS OPEN button is pushed for less than 1 sec, then
TRANSMITTER sends the Rear Glass open data
3) PANIC
If PANIC button is pushed for more than 2 sec, then
TRANSMITTER sends the PANIC (Burglar alarm)
Description of Transmitter and ETACS
1. PRIMARY FUNTION
- Remeto door lock/unlock/Back Glass Open/Panic
- LED turn on ( When the lock/unlock/B.G.O/Panic button is pushed )
- Operating distance : 7~ 10 m
2. ELECTRICAL CHARACTERISTICS
TRANSMITTER
ETACS
Operating voltage
3 VDC
10 ~ 16 VDC
Consumption current
Max 20mA
Max 5.5mA
Operating frequency
315㎒
Power
10mW under
Sensitivity
-105dBm(typical)
Operating temperature
-20 ~ +60℃
-30 ~ +80℃
etc
AM modulation
Super-heterodyne
3. OPERATING DIAGRAM
1) TRANSMITTER
A)
B)
1200usec
180msec
C)
2) ETACS
ETACS
RF DATA INPUT
Output Circuit
CAR
Door Lock
Door lock Relay
Door Unlock
Door unlock Relay
Back Glass Open
Back Glass Relay
Panic
Hazard Relay
Horn Relay

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:05:30 11:13:18+09:00
Modify Date                     : 2003:05:30 11:13:18+09:00
Page Count                      : 7
Creation Date                   : 2003:05:30 02:13:18Z
Mod Date                        : 2003:05:30 02:13:18Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:05:30 02:13:18Z

EXIF Metadata provided by EXIF.tools