Boompods DB2 wireless speaker User Manual db2 manual

Boompods (HK) LTD. wireless speaker db2 manual

15_doubleblaster2 UserMan r1

music . anywhere . everywhereModel: doubleblaster 2 User ManualBOOMPODSBOOMPODSName: doubleblaster2USE: Loud and clear sound and powerful bass.Speakers: φ52 4Ω 7W (max) 100-18000Hz + Passive bass Protection rating: IPX6 splashproofbattery: 3.7V 2200mAH lithium Charge: time 3HrsStandby time: 2000HrsWorking time: 8Hrs (70% volume)Bluetooth: 4.1 (TWS dual pairing) Bluetooth range: 10M (open space)microphone sensitivity: -42(+-)3dB;omni-directional; S.N.R ≤60dBStandby current: ≤200μAWorking current: ≤100mA (minimum volume)Charging current: DC 5V 0.8 A (red LED lights) Working frequency: 2.4-2. 480 GHZdistortion: ≤3% TECHFCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.BOOMPODS is a trademark of BOOMPODS LTD., Registered in England No 08147066. Boompods Ltd Unit 34, 67-68 Hatton Garden, London EC1N 8JY United Kingdom BOOMPODS ©2017 All Rights. This product uses BOOMPODS technology and is covered by international patents, Made in China.TURN UP THE BOOM!General guidelines:Keep away from high temperature or prolonged exposure to direct sunlight.Avoid constant contact with liquids.Do not disassemble.Do not drop repeatedly or excessively.Keep out of reach of children.Warranty:Your BOOMPODS product is guaranteed against any defects in material or workmanship for one full year from the date of original purchase providing it has not been disassembled and it has not suffered accidental damage such as a hard knocks or long immersion in water, etc. The device must be used in accordance with the user manual. The warranty is subject to presentation of the original invoice or receipt from the retailer and does not apply to normal wear and tear or to any device that has been misused or tampered with. It should be returned to the local service centre, the service centre will not bear any shipping cost of the returned item.Please check www.boompods.com for your local service centre.Please read me carefully before using your doubleblaster speaker for the first time.CHARGEHELLO!Charging: Open the micro USB cover ⑤, connect supplied cable micro USB end ⑦ to micro input socket, then connect USB ⑧ to USB charging point. Once fully charged red light ⑨ will go out. If you want to play music whilst charging, connect to your device first and then start charging. *WARNING after charging make sure rubber cover is firmly closed to allow no water or debris to enter. Failure to do this will void your Warranty.BOOMPODS BOOMPODS⑤ EN① On/off, pairing mode(PRESS)② Play, pause, take calls, and drop calls④ Volume up (1 tap), skip track (press hold)③ Volume down (1 tap), previous track (press hold)to activate Shhhhh modeHold + > - BOOMPODS⑤ ⑥Connecting with audio cable:Connect 3.5 audio jack ⑥ to your music source & the micro ⑦ connection to the side of your speaker by opening the micro-USB cover ⑤ please note your speaker is not waterproof with the door open.⑦⑦⑧ ⑨ LEDConnecting to Bluetooth:Press and Hold ON/OFF button ① until you hear ‘bi-bing’ sound which will then be followed by the pulsing searching sound. Now find the words ‘DB2’ in your Bluetooth device menu, select this & wait until the pulsing sound has stopped and another ‘de-dum’ sound. You are now connected & ready to play music & receive calls. To switch off; press & hold the ON/OFF button until you hear the ‘de-dum’ sound. If you lose power on your Bluetooth device or move out of range your DB2 will make the ‘de-dum’ sound. You will need to move closer to your speaker and it will reconnect, if this doesn’t happen you can either switch OFF & ON to reconnect your speaker or double press the ON/OFF button to activate pairing mode and reconnect.CONNECTModel: Doubleblaster2

Navigation menu