Borofone Technology BQ1 Wireless charger User Manual en 300328v020200a

Download:
Mirror Download [FCC.gov]
Document ID	3986330
Application ID	ziwaK5hL05fyihZrIWigKA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.4kB (329963 bits)
Date Submitted	2018-08-31 00:00:00
Date Available	2018-08-31 00:00:00
Creation Date	2018-08-22 20:14:01
Producing Software	pdfFactory Pro 3.52 (Windows 7 Professional Chinese (Simplified))
Document Lastmod	2018-08-30 18:45:53
Document Title	en_300328v020200a.pdf
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	Administrator

Borofone Technology Co.,Ltd
Product recognition
product name
Type products
Products make up no
customer confirmation:
version
number
date
V1.0
2018.8.6
wireless charger
BQ1
tabulati investig
on
ate
ratify
Borofone Technology Co.,Ltd
catalog
overview…………………………………………………………第 2 页
battery status………………………………………………………第 3 页
Productfunction and process description…………………………第 4 页
performance parameter……………………………………………第 5 页
product appearance ………………………………………………第 6 页
overview
This specification describes the range of wireless charging and
transmitting applications produced by shenzhen meishiqi technology co.,
LTD,technological standard,Electrical Characteristics,Main material, The
main ingredient in,dimensions,Testing standards and other related items。
This specification can be used as the quality inspection standard and basis
of this product。
2 product function
2.1
W23 The wireless charging source board provides power to the
built-in circuit through MICRO interface input。
2.2
Working through the built-in conversion circuit through the wireless transmitter coil output，It
Borofone Technology Co.,Ltd
can provide power for QI wireless charging mobile phones and other devices that support QI
wireless charging.
2.3 operating mode：
When the launch pad is output normally, the green indicator is long and
bright。
2.4
standby mode： When the launcher is in standby mode without load, red indicates long
brightness。
2.5 Exception Modes：
The launch pad is working abnormally，If metal is placed on the transmitting
coil or an incompatible receiving object，The red indicator is flashing continuously。
2.6
instructions
Plug the power cord into the MICRO input terminal on the wireless transmitter board，Stack the
receiver of a mobile phone that supports wireless charging in the position of the transmitter coil，The
indicator light on the transmitting panel shows that the green light is on for a long time, which is the
normal charging state。
（Adjust the best position to charge more quickly）
2.7
defensive function
Red indicator light flashes when metal objects are placed or incompatible receiving objects on
the transmitting coil.At the same time, the output conversion is stopped, and the normal standby state
is restored after the foreign body is removed，Normal output works when the correct receiver is
placed.
NO
3.
item
product
appearance
product
proces
3.
Product appearance and technology
welding
require
ments
test method
Inspection standard/process
visual
The appearance of the product shall meet the following
requirements：Reasonable wiring，Element arrangement，
No oxidation of welding disc and welding point，
achromatism，Overall appearance clean without stain，
Does not affect its commercial value
Eyeball, or
use a
magnifying
The soldering point is smooth and full，weld firmly，There
is no false welding，No virtual welding。
Borofone Technology Co.,Ltd
glass
Enclosu
re
Material
√ Glass fiber double
□ Glass fiber layer
Ordinary single-layer
□ other
PCB
technolo
gical
coating
√ Solder Coating
welding
technol
ogy
□
√Environmental protection welding □ NO
Environmental protection welding
Product electrical performance parameters
NO.
item
symbol
test method
inspection standard
Max
median
min
unit
Parameter
4.1
4.2
Efficienc
0.5A out
1A out
Static
No load consumes
current
current
η
η
IPWN
input voltage 5V
The system is idle
72
70
55
mA
1200
mA
mA
incomin
4.3
USB charge current
IIN
1500
current
4.4
4.5
4.6
output
The receiver
current
outputs a current
output
Receiving end
voltage
output voltage
output
voltage
IOUT2
1050
1000
VOUT
5.10
4.95
4.85
floating voltage
VOUT
5.20
5.10
4.95
output rating
℃
65
50
℃
70
65
℃
Operati
4.7
ng
tempera
environment
temperature
25℃
ture
4.8
NTC
protect
ed
thermo
ambient
temperature 25℃
℃
Borofone Technology Co.,Ltd
mete
After temperature detection and protection, the red light flickers continuously and returns to normal
operation after the temperature decreases.
product appearance:
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum 20cm distance between the radiator
your body: Use only the supplied antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : en_300328v020200a.pdf
Create Date                     : 2018:08:22 20:14:01+08:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Modify Date                     : 2018:08:30 18:45:53+08:00
Metadata Date                   : 2018:08:30 18:45:53+08:00
Producer                        : pdfFactory Pro 3.52 (Windows 7 Professional Chinese (Simplified))
Document ID                     : uuid:0ff218d9-9b15-4f4a-976b-458e6406b497
Instance ID                     : uuid:2775a758-d8f1-4c7c-a2e0-f2702250a066
Page Count                      : 6
Author                          : Administrator

EXIF Metadata provided by EXIF.tools