Bosch En Us D8101A Enclosure Installation Manual 18014401249443979
User Manual: Bosch en-us D8108A Attack resistant enclosure, large, grey
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
4 | D8108A Specifications Dimensions 16 in. x 16 in. x 3.5 in. (41 cm x 41 cm x 9 cm) Color Grey Compatible Tamper Switches D110 (P/N: 4998137947) or Attack Resistant Enclosure D8108A/D8108A-CE ICP-EZTS (P/N: F01U217038) D101 Lock and Key (included) (P/N: 4998800200) 5 | D8108A-CE Specifications Dimensions 16 in. x 16 in. x 3.5 in. (41 cm x 41 cm x 9 cm) Color Grey Compatible Tamper Switches D110 (P/N: 4998137947) or ICP-EZTS (P/N: F01U217038) D101 Lock and Key (included) (P/N: 4998800200) Transformer (included) (P/N: F01U166215) 6 | D8108A certifications Region Certification USA UL 294 - Access Control System Units UL 365 - Police Station Connected Burglar Alarm Units and Systems UL 609 - Local Burglar Alarm Units and Systems UL 864 - Control Units and Accessories for Fire Alarm Systems UL 985 - Household Fire Warning System Units UL 1023 - Household Burglar-Alarm System Units UL 1076 - Proprietary Burglar Alarm Units and Systems UL 1610 - Central Station Burglar Alarm Units CSFM - California Office of The State Fire Marshal FDNY Canada CAN/ULC S303 - Local Burglar Alarm Units and Systems CA CAN/ULC S304 - Signal Receiving Centre and Premise Alarm Control Units ULC-ORD C1023 - Household Burglar Alarm System Units 7 | D8108A-CE certifications Region Certification Europe CE Copyright This document is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. Bosch Security Systems, Inc. product manufacturing dates Use the serial number located on the product label and refer to the Bosch Security Systems, Inc. website at http://www.boschsecurity.com/datecodes/. © 2017 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450 Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany en Installation Guide 1 | Overview 2 | Installation The D8108A/D8108A-CE Attack Resistant Enclosures house many Bosch Security Systems, Inc. control panels. When housed in a D8108A/D8108A-CE, a listed control panel can be used in a high-security mercantile alarm application. For specific control panel applications, refer to the operation and installation manual for the control panel. The D8108A-CE enclosure includes a transformer for CE installations. Two knockouts in the enclosure base (one in the top, the other in the bottom) accommodate ¾ in. (2 cm) conduit. The enclosure door is slotted to enable conduit access. 1. Attach the lead wires to the terminals on the two tamper switches and wire them in series with an EOL resistor. 2. Using the supplied hardware, screw the tamper switches to the enclosure (screws on the outside and the nuts on the inside). 2 16 in . 3. Mount the lock for UL Burglary and Fire applications on the enclosure door. 5 3 6 4. Mount the enclosure to a hard, flat surface. 5. Mount the control panel (with the mounting skirt) inside the enclosure. 6. Wire, program, and test the control panel and related peripheral equipment. 7. Wire the tamper switches to a control panel protective zone or point input. 4 8. Close the enclosure door. 16 in. 1 3 9. Install the supplied 7/8 in. (2.2 cm) 8-32 screws in the five locations, securing the door to the base and making the enclosure attack resistant. 3 | Wire a D8108A-CE to a control panel 3.55 Wire the D8108A-CE transformer to the control panel after completing the instructions in Section 2. in. 6 Low 12.1 VDC Load Shed 10.2 VDC 1 1 CLASS 2 16.5 VAC 40 VA 60 Hz 2 TRANSFORMER 3 3 + AUX POWER BATTERY ( - ) 4 Figure 1.1: Mounting the enclosure and installing accessories 5 BATTERY ( + ) 6 Callout ― Description OUTPUT A (1) OUTPUT 7 B (2) 8 1 ― Tamper switches (2) OUTPUT C (3) 9 COMMON 10 EARTH GROUND 2 ― 1 in. (2.5 cm) 6-32 screws (6) and nuts (6) for the tamper switches WARNING! Multi-Battery installation requires Model D122 or D122L Dual Battery Harness. Improper installation can be a fire hazard. 3 ― 7/8 in. (2.2 cm) 8-32 machine screws (5) 2 4 ― D101 Lock and key (P/N: 4998800200) USB POWER STATUS 5 ― Tamper switch mounting holes B A S E L I N K USB T ETHERNET 3 L 6 ― Knockouts N 4 Figure 3.1: Wiring the D8108A-CE Callout ― Description 1 ― Low voltage AC 2 ― Ground wire connection 3 ― AC IN © 2017 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450 Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany 4 ― Wire tie the AC IN wires to the enclosure lance 4998132018 | 07 | 03.2017 | 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Instance ID : uuid:68d6a43f-80bd-492c-ba32-b1543275d39d Original Document ID : adobe:docid:indd:4c5a4b53-db0f-11e0-95ad-fb5d9da14e1b Document ID : xmp.id:4deff48d-3514-cb4e-b870-d43ffe1d4c8b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:6c747f2e-d1ad-cb4a-9de3-a1d627088a42 Derived From Document ID : xmp.did:9E21D3B586F4E611A597A40DAC4D4A7D Derived From Original Document ID: adobe:docid:indd:4c5a4b53-db0f-11e0-95ad-fb5d9da14e1b Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:03:24 13:03:03-04:00 Create Date : 2017:03:24 13:03:03-04:00 Modify Date : 2017:03:24 13:03:06-04:00 Metadata Date : 2017:03:24 13:03:06-04:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools