Bosch En Us RLN DCN SW 4.63 Release Note 108086404315506955
User Manual: Bosch en-us DCN Conference Solutions
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
DCN Next Generation 4.63 Release Notes en Release Notes DCN Next Generation Release Notes en | 2 DCN Next Generation Release 4.63 Table of Contents 1 2 3 4 5 6 This release Contains ................................................................................................... 2 Improved and added Functionality ............................................................................... 2 Release Compatibility Restrictions .............................................................................. 7 Software, Firmware & FPGA versions .......................................................................... 8 Additional Information to the DCN Manuals and Help Files ...................................... 10 Trouble Shootings and known issues ........................................................................ 11 1 This release Contains The following versions are part of this release: Product DCN-SW DCN-SWSMV DCN-SWSACC DCN-DLT (for CCU2) DCN-CCU2 HdCameraControl DCN-DLT (for CCU, NCO) DCN-CCU DCN-MR version 4.62 4.40 4.40 4.63 4.63 4.40 3.10 3.10 2.30 Windows 7a Yes Yesb Yes Yes NA Yes Yes NA Yes Windows 8.1a Yes Yesb Yes Yes NA Yes No NA No Windows 10a Yes Yesb Yes Yes NA Yes No NA No Notes: a. home editions of Windows 7, 8.1, or 10 are not supported. b. DCN-SWSMV: exporting voting results to PowerPoint is only supported for PowerPoint 2003. 2 Improved and added Functionality Release 4.63 Release Date 2017-11-29 4.62 2017-10-13 4.61 2016-9-17 Release Comments New functionality and improvements Improved calibration behaviour of the optical network upon booting and adding and removing devices from the optical network. New functionality and improvements Fixed DCN-SW cannot be installed on PC with Windows 10. Microsoft SQL2014 will be installed with new installations. In case of upgrades the existing SQL 2008 will be used. New functionality and improvements Fixed Slave CCU resetting issue due to time out, by increasing the time out value. Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Release 4.60 Release Date 2016-7-20 4.50 2015-11-16 4.43 2015-05-15 en | 3 Release Comments New functionality and improvements Fixed DCN-SW server front end application and DCN-SW printing application do not start on French, Portuguese and Spanish Windows. Fixed issues with streaming meeting data in combination with display application and or DCN meeting recorder. Fixed notebook behaviour of devices. Updated CCU2 firmware to support DCN-CCU2 and DCNCCUB2 hardware version HW01/04. Improved DCN Meeting Recorder in combination with streaming meeting data. New functionality and improvements Windows 10 supported. Added Hungarian translations Concentus. Fixed time stamp problem of DCN-MR Remote control via Open Interface for all (Audio) expanders. (Digital IO contacts) Remote configuration via Open Interface of all expanders, AEX, DEX, CIN ,OMI; (Routing of the DCNNG floor and languages to all in- and outputs) Level control for Omneo Media Interface Microphone detection for Interpreter desk (internal, external, auto) via DCN-CCU2 front panel tvONE C2-6204A with 4 HD-SDI inputs is supported in HDCameraControl as successor of the tvONE C2-2355A / S2108HD combination Removed Webcasting software and manuals from the DVD New functionality and improvements Fixed: Notification of disconnection from the Bosch DCN Conference Software. Fixed: Operator application shows error and red cross after setting the Central Control Unit to Standby Changed error message when an ID card reader cannot read ID card into understandable text. Fixed: Discussion unit cannot be controlled from synoptic after a reboot of the CCU. Fixed: Language configuration in DCN-IDESK does not change with meeting after a reboot of the CCU. Improved startup behaviour of Integrus transmitter. Improved Mongolian translations on Concentus. Support of new AD convertor in Integrus Transmitter. Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Release 4.42 Release Date 2015-03-18 4.41 2014-11-02 4.40 2014-07-30 4.30 2014-01-31 en | 4 Release Comments New functionality and improvements Fixed delay of voting results via SMD if a vote is cast during the start chime Fixed first vote is not exported via SMD Fixed card production settings fall back to CRC after opening and closing the card production settings Fixed error upon closing Configuration Application after producing cards during a running meeting Fixed DCN-SW does not install on Turkish OS Fixed focus/control goes to prepared votings when a adhoc voting is started Fixed problem with Black Magic card (due to new Black Magic drivers) in DCN-SWWA webcasting Fixed problem with pause behavior of DCN Meeting Recorder New functionality and improvements Improved DCN wireless firmware to make it more robust in environments with a lot of WiFi communication Unresponsive microphone control in Operator application due to network disconnections Added DCN-SW icons to DVD New functionality and improvements Added Notebooker configuration to the API and DcnApiDemonstrator Added AGC on/off to audio outputs of Audio Expander in Individual Channels mode DCN-CCU2 supports Omneo Media Interface (PRS4OMI4) to interface with DCN multimedia Added Mongolian to Concentus display ID cards can be programmed via API with and without CRC Insert and remove of ID card can be executed via API to enable interfacing with third party identification system Windows 8.1 support for DCN-SW Windows 8.1 support for DCN-SWSMV Windows 8.1 support for DCN-SWSACC Windows 8.1 support for HdCameraControl Added Crystal Reports installer to Tools directory (CRRuntime_32bit_13_0_9.msi). This needs to be installed to print the voting reports from DCN-SWSMV. Note Windows Vista is no longer supported for DCN-SW, DCNSWSMV, DCN-SWSACC, HdCameraControl New functionality and improvements DcnHdCameraControl added second video switcher Kramer MV-6 DcnHdCameraControl made screen line configurable DcnHdCameraControl added camera transition time added create groups, rename meetings, rename sessions, request list via API (DCN-SWAPI) including demonstrator application with source code. Support for the new audio expander PRS-4AEX4 by DCNCCU2. Fixes Increased the vote description from 50 to 130 characters. Indivual voting results not translated. Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Release 4.21 4.20 Release Date 2013-09-30 2013-07-15 en | 5 Release Comments Fixes Multi channel and multi lingual DCN-SWWA (version 1.1.1) added. Russian helpfile missing in DCN-SW. Previous DCN-SW version cannot be upgraded because database of previous DCN-SW version cannot be upgraded. New functionality and improvements DCN-SW added Opinion Poll and Audience Response (requires DCN-SWMV multi voting license) Select, Summon, Start, Hold, Stop of votings via API (DCNSWAPI) including demonstrator application with source code. DCN-SW copy vote and copy session added to Configuration Application and API to improve usability Master Volume Control and Chairman Priority added to Control API. Added Vietnamese and Indonesian language to DCN-SW, DCN-SWSMV and DCN-SWSACC Added get and set System ID for slave CCU’s to Open Interface Response list length increased from 5 to max 25 and made configurable on CCU and via DCN-SW Number of Open Microphones (NOM) increased from 4 to 25. Number of seats which can be added to the Notebook increased from 15 to 25. Increased Operator Application target size Added group speech timers to DCN-SWSMD (and DcnSmdDemonstrator application) Added show last minute of speech by blinking microphone LED Added a new audio routing option to the CCU: Insert no AGC. Fixes DCN-SW added Czech, language to the installer. Show OI connection on CCU Solved inconsistencies in showing voting results Solved SMD error regarding loss of speaker information when chairman speaks and ID cards and speechtimers are used. Voting control on desktop does not show graphs for group results Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Release 4.10 Release Date 2013-04-17 4.03 2012-07-15 en | 6 Release Comments New functionality and improvements Start/Stop Meeting and Session and Microphone Management control via API (DCN-SWAPI) including demonstrator application with source code. Control of the IDesk outgoing channel using DCN Operator Application (requires DCN-SWSI license). DCN-SW added Voice Activated Microphone Logging to identify which microphone is active in VOICE mode (requires DCN-SWVAML license). Can be used in combination with camera control to see who is speaking is voice mode. DCN-SW font colour below icons on layout can be changed. DCN-SW Meeting can be copied (including all settings) using Configuration Application and API. Demonstrator application including source code for DCNSWSMD XML streaming meeting data. HD Camera Control via DCN-SWSMD streaming meeting data. DCN-SW added Czech language to the GUI. Czech language has to be copied manually, please refer to the Tools\Language\ directory. Extended the explanation about the TCP connection in Open Interface description. DCN-SWWA Webcast application added. Only English User interface. Only one audio-channel/language. Fixes DCN-SWSMD information regarding microphone on off. DCN-SWSMD information empty when session name and description are identical. Stopping an Operator-control session does not clear request list. DCN-MR wave form and audio sometimes not in sync. DCN-SW not all GUI texts fit. DCN-SWSMV Reset microphone sensitivity ALL MICROPHONES. DCN-CCU2 can cause acoustic feedback when powered up in Insertion mode. DCN-SW added Slovenian language to GUI. Made Japanese helpfile part of the installer. Added Thai, Polish and Finnish language to the installer. DCN-SWSMD Participant is made absent when Chairman speaks in Operator with response mode. Quorum shows strange behaviour with ID-cards and Secret voting. Performance and stability improvements on DCN SW Server and Operator Control Delegate names are not shown in speakerlist when using access control for voting only. Fixes DCN-SW Operator Application can cause a fault pop up upon user login and start session. DCN-SW Configurator Application can cause a fault pop up when a document will be inserted with a file name that is too long. DCN-SW Printing Application will not start up in Spanish, Catalan, Portuguese and Polish. Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Release 4.02 Release Date 2012-04-16 4.01 2012-03-01 4.00 2011-12-02 3.10 2011-07-26 en | 7 Release Comments Fixes Fixes Inserting or withdrawing of ID-cards could lead to fault pop up. Auto-relay is always activated when the B-output channel is selected (Using DCN-SW with DCN-SWSI). DCN-CCU2 replaces DCN-CCU, DCN-WCCU and DCN-NCO DCN-CCUB2 replaces DCN-CCUB New functionality and improvements Simultaneous Interpretation DCN-SWSI added Usher call and speak slowly requests support DCN-SWMD DCN-SW GUI languages: de, ca, en, es, fr, hu, it, jp, ko, lt, nl, no, pt, ru, sv, zh-chs DCN-SW help files languages: de, en, es, fr, it, nl, zh-chs Seat assignment and seat definition improved DCN-SWSACC indicates when DCN-SWSACC licenses is missing. 3 Release Compatibility Restrictions The following versions are compatible with this release: Product Hw FPGA DCN-CCU2 <1.4 na DCN-CCU2 1.4 na DCN-CCU 1.07 DCN-CCU in multi CCU mode >=5.0 >=2.17 LBB 4120/00 Interpreter desk >=1.2 Toggle in DCN-IDESK Optical devices SW na na -->=1.40.xxxx FW 4.60 4.60a 3.1x --5.02 Note: a. DCN-CCU2 with hardware 1.4 could become defective if they are downgraded below software version 4.60. Wireless Units: New firmware is developed for the DCN Wireless units to operate with the DCN-CCU2 (e.g. encryption functionality). This firmware can be uploaded using the Download and License Tool (DLT) and the Upgrade Toolkit (DCN-UPTK). This firmware works with DCN-CCU2 and DCNWCCU. Products with the following hardware version have already this firmware installed. Product DCN-WD-D DCN-WDD-D DCN-WDV-D DCN-WDCS-D DCN-WDDCS-D DCN-WDVCS-D Bosch Security Systems| 2017-11-29 Hw 02/04 02/04 02/04 02/05 02/05 02/05 DCN Next Generation Release Notes en | 8 4 Software, Firmware & FPGA versions The table below provides a versions overview of parts which cannot be downloaded using the Download and License Tool or the DCN-UPTK Wireless upgrade Tool kit. Please contact your local Bosch representative how to update these parts. The HW column indicates if the Hardware Version of the product is supported for the listed parts. For product which cannot show the FPGA version, the HW version belonging to the FPGA version is shown between brackets after the FPGA version. DCN-CCU & DCN-WCCU FPGA HW 2.23 ≥ 4.0 2.22 ≥ 4.0 2.20 ≥ 4.0 2.19 ≥ 4.0 2.18 ≥ 4.0 Fixes Slow reacting Multi CCU system Noise or no audio on delegate loudspeaker Unstable system after start-up due to optical network disturbances Noise on delegate loudspeaker Unexpected beeps on delegate loudspeaker fixed DCN-CCUB FPGA 1.22 1.09 1.08 HW ≥ 1.0 ≥ 1.0 ≥ 1.0 Fixes Noise or no audio on delegate loudspeaker Noise on delegate loudspeaker Unexpected beeps on delegate loudspeaker HW ≥ 1.0 ≥ 1.0 Fixes / Additions Address might be lost after system restart 11Khz noise ≥ 1.0 CRC check added for ID-cards DCN-DDI FPGA 2.2 (hw02.01) 2.0 (hw02.00) HW ≥ 1.0 ≥ 1.0 Fixes / Additions 11Khz noise CRC check added for ID-cards DCN-DIS range FPGA 1.20 (hw02.06) 1.18 (hw02.03) HW ≥ 1.0 ≥ 1.0 1.15 1.13 (hw02.02) ≥ 1.0 ≥ 1.0 Problem fixed 11Khz noise Disturbed audio on headphones for channels > 28 Address might be lost after system restart Channel auto increment equal to DCN-CON Audio distorted on headphones DCN-FCS FPGA 2.7 (hw02.02) HW ≥ 2.0 Fixes 11Khz noise HW ≥ 2.0 Fixes / Additions 11Khz noise ≥ 1.0 loudspeaker symbol might be shown in front of the quality indicator after leaving the Idesk’s installation menu B Toggle added DCN-CONxx range FPGA 1.17 (hw1.12) 1.14 (hw1.10) SW 1.10.xxxx (hw1.13) DCN-IDESK FPGA 2.1 SW 1.41.xxxx 1.40.xxxx ≥ 1.0 Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes INT-TX Range FPGA 02.03 02.02 02.01 HW ≥ 1.0 ≥ 1.0 ≥ 1.0 en | 9 Fixes / Additions The display might show unexpected characters Improved stability when used in combination with the DCN system Improved stability when used in combination with the DCN system Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes en | 10 5 Additional Information to the DCN Manuals and Help Files Reference Security DCN-SWAPI What Security measures The installer is responsible for security measures to prevent improper use of the system via the Internet and local wired or wireless networks. Think of the following items to increase security: Prevent unauthorized access to the Central Control Unit Prevent unauthorized physical and logical access to the wired Ethernet connection Central Control Unit Prevent unauthorized access to the DCN NG computer Change the default admin password Place the Central Control Unit in a separate VLANUse a firewall Using the API in an ASP.NET environment. Prerequisite: The project build platform target should be x86. During development For developer environment in IIS express, the user has to place the “Bosch.Dcn.Ecpc.Client.Logic.dll.config” file in following location: C:\Program Files (x86)\IIS Express After deploying The user has to place the same “Bosch.Dcn.Ecpc.Client.Logic.dll.config” file in the following location: C:\Windows\SysWOW64\inetsrv Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Reference DCN-SW Wireless Discussion Units DCNSWSMV DCNSWSMV en | 11 What When installing DCN-SW on a Windows 7 PC you might get the following notification: This is because within the time installer checks for framework, SQLServer installation starts which prompt for the framework installation. Please press OK, after this the framework will be installed from the DCN-SW installer and DCN-SW installation will install successful. Wireless Discussion Units which are produced before 2012 need to be upgraded using the DCN-UPTK and DLT (4.xx) in order to operate with a DCN-CCU2. Showing voting results in PowerPoint In case PowerPoint is used to show the voting result, it might happen that PowerPoint starts and overlaps the user interface of DCN-SWSMV completely. Use the Windows task bar to select DCN-SWSMV again. Printing voting results To print voting results, Crystal Reports needs to be installed. It is located in the Tools directory of the DVD (CRRuntime_32bit_13_0_9.msi). 6 Trouble Shootings and known issues This trouble shootings and known issues are in addition to chapter 2 and to the trouble shooting chapter in the user manuals. Product/function Problem Solution DCN-SW control When changing the No solution available microphone sensitivity of the Audio clicks are only heard while increasing or sensitivity of microphone of the decreasing microphone sensitivity of DCN-IDESK. DCN-IDESK DCN-IDESK will result in short audio clicks. DCN-SW In rare occasions it Restart the DCN-SW Configuration Application. Configuration can happen that the Application application closes unintended. DCN-SW rinting Individual voting Change the voting template accordingly: individual voting results are not printed 1. Check the “Automatic print after stop of the results manually when printed voting” checkbox. manually via Bosch 2. Change the settings to Total, groups and DCN SW Print individuals. Application. 3. Uncheck “Automatic print after stop of the voting” checkbox. DCN-SW multi PC Client cannot connect Configure the adapter settings in such a way that the with Server when network adapter which is used for DCN NG is the multiple network highest in the list of connections in Adapters and adapters are available Bindings DCN-SW Delegate both in If a delegate is both in the Request to Respond as in Request to speak as the Request to Speak list and you want to shift the Request to respond Request to Speak to Speaking, first cancel the list. Request to Respond. Bosch Security Systems| 2017-11-29 DCN Next Generation Release Notes Product/function DCN-SW Problem On 64-bit operating systems, it might difficult to find previous SQL-server during DCN-SW installation, when initial SQL-installation was not default. DCN-SW System overview does not show all connected devices when system is still powering up. DCN-SW Master Volume is different from CCU volume control DCN-SW DCN-SW Downgrade to versions <3.10 not possible. DCN-SW Unexpected behaviour or no reaction of DCN-SW. DCN-SW Generates errors after Windows Stand by.. Secret mode does not work in ad-hoc voting Voting attention tone cannot be changed during a running meeting. Error code 2869 or Fatal error during installation. Error notification upon closing DCN-SWSMV directly after opening it. DCN-SWPV DCN-SWPV DCN-SW setup repair DCN-SWSMV DCN-SWSMV help file When opening help file you get an error. Bosch Security Systems| 2017-11-29 en | 12 Solution During installation of DCN-SW the installation process might not be able to find the previous SQL-server, in case during initial installation another name for the SQL-server was created, instead of using the default name. Therefore it is recommended to use the default name and folder during initial SQL-installation. If a SQL-server with a non-default name needs to be found, the correct name should be entered manually in the applicable box during DCN-SW installation. Wait until DCN-system is powered up completely and then check the connected devices via DCN-SW configuration application VIEW \ System Overview. When the Master Volume of the CCU has been changed while DCN-SW was disconnected, the DCNSW Master Volume will not reflect the CCU-setting. Changing the DCN-SW volume setting, will make them identical again. Manually uninstall SWL server 2008. Note that the DCN-SW database (the database contains all settings like seats, meetings, synoptic layouts, etc.) will always be removed during a downgrade. Due to Windows Automatic Updates some critical components like SQL Server Express might be temporarily not available for DCN-SW. Do not set Automatic Updates to Automatic or restart your system after the Automatic updates have been installed. Disable Stand by functionality in the Windows operating system. Update to version 2.80 or higher The voting attention tone can be changed in the voting template but becomes effective after a vote has been selected or started. Remove DCN-SW with DCN-SW setup and make a new installation. Settings are stored in the SQLdatabase and can be re-used in the new installation. Please wait at least 10 seconds to close DCNSWSMV after opening it. Just close the error notification. DCN Next Generation Release Notes Product/function DCN-SWSMV Problem DCN-SWSMV will not start Wired and wireless system in combination with Integrus No audio on DCN wired and wireless units when powering up DCN-CCU2 and Integrus transmitter simultaneous. DCN-DLT is not able to download the firmware of the CCU Not able to download DCNCCU2 firmware HD Conference Dome DCN-UPTK DCN-CCU(B)2 DCN-CONFF and DCN-CONCM DCN-SWSACC and Allegiant The HD Conference Dome will show an incorrect name & picture combination if a new pre-position is asked before it reaches it’s preposition. The type of the unit connected to the UPTK is not valid. Error relays activated upon system reset or firmware download. DNPV answers in voting are not visible in the Concentus screen when a voting timer is activated. Double screenlines are still visible on audience screens after switching to single screenlines. Bosch Security Systems| 2017-11-29 en | 13 Solution Voting legends cannot be changed into “Not Voted”. Remove “BCPCSettings.xml” which can be found: For XP: “…\Documents and Settings\All Users\Application Data\Bosch\DCN Synoptic Microphone and Voting Software\x.xx” For Vista: “…\Programdata\Bosch\DCN Synoptic Microphone and Voting Software\x.xx” First power up the DCN-CCU2. After it is powered up, power up the Integrus transmitter. Note: in a system with DCN-CCU2 and other optical devices; always first power up the DCN-CCU2 before powering other optical devices. Check if the DCN-SW server is not running: 1. Exit the DCN-DLT program 2. Check if the DCN-CCU2 does not report PC on it’s display. If it does Stop the DCN-SW server via Start\SERVICES. Services (local). And check if PC disappears. 3. Start DCN-DLT (PC will now re-appear in the CCU2 screen, but that is correct) and start the download. If the download still fails, do the following: 1. Power off and open the DCN-CCU2 2. Set switch 8 of S600 to ON and power on the CCU. 3. Download the CCU using the DCN-DLT. 4. After a succesfull download, power off the CCU, set switch 8 of S600 to OFF again and power on the CCU. Do not activate another microphone until the HD Conference Dome has reached it’s pre-position. This notification can occur when the DCN-UPTK unit is used extensively. Please replace the connection cable. During a firmware download or system reset, the system is not in normal operation and thus the error relays can be active. Use a hall display or disable the voting timer. Restart the Allegiant. DCN Next Generation Release Notes Product/function DCN-SWSACC DCN-MR DCN-MR Problem Upload does not work anymore. DCN-CCU(B)2 goes to Open mode after closing DCN-MR application. DCN-MR does not connect to DCN-SW when installed on another PC en | 14 Solution Restart the DCN-CCU or DCN-NCO. In a system where: 1. The DCN-CCU(B)2 is connected to DCN-SW or DCN-SWSMV and 2. Connected to DCN-MR via Open Interface and 3. The CCU is in Operator mode. It will go to Open mode if: It loses connection with DCN-MR (e.g. the application is stopped) To restore the microphone mode to Open mode, the microphone mode needs to be set to Open mode via DCN-SW or DCN-SWSMV. Note: it will also go to Open mode if it loses connection with DCN-SW or DCN-SWSMV. So that the meeting can still continue. 1. Open the Meeting Recorder.ini file with notepad it is located here: C:\Users\[USER NAME]\AppData\Roaming\Meeting Recorder if the user name is administrator, the path will be: C:\Users\ Administrator\AppData\Roaming\Meeting Recorder 2. Find the variable NCO Ip=x.x.x.x (where x.x.x.x is the IP address of DCN SW server) and below that line; Create a line DCO Ip=x.x.x.x (where x.x.x.x is the IP address of the DCN SW server) NCO NCO DCO CCU Port=20000 Ip=10.120.22.230 Ip=10.120.22.230 Ip=192.168.1.1 3. Save the Meeting Recorder.ini file DCN-MR Multi CCU systems Windows audio playback is lost after installation DCN-MR 1.3. in windows XP. System reaction is (very) slow after system startup. Bosch Security Systems| 2017-11-29 Replace files msacm32.drv, msadp32.acm and imaadp32.acm in the windows system32 folder. The system might become (very) slow when in a multi CCU system only the NCO is switched off and the rest of the system stays switched on. To prevent this problem: Shutdown all optical devices in the Multi-CCU system. DCN Next Generation Release Notes Product/function DCN-NCO Problem DCN-NCO cannot be downgraded or upgraded. en | 15 Solution A known issue is that DCN-NCO cannot be downgraded from SW 2.70. Workaround 1) Install the Download and License Tool of the version you want to use to downgrade or upgrade to. 2) Open Notepad and paste the text below into Notepad user target password cd /rfa dele PDSDATA1.PDS dele PDSDATA2.PDS bin hash cd /rfa/drv put mmu_3.bit put mif_3.bit cd /bim put dune.bim bye DCN-CCU DCNNCO DCN-NCO DCN-CCU, INT-TX04/08/16/32 DCN NCO DCN-CCU INT-TX04/08/16/32 DCN NCO DCN-CCU INT-TX04/08/16/32 Local floor muted after download of NCO or CCU Unexpected behavior when adding powered system units to the optical ring Audio disruption when switching on a transmitter Audio disruption when one of the CCUs is in the mode “--“ Bosch Security Systems| 2017-11-29 3) Save the file in Notepad to C:\Program Files\Bosch\Digital Congress Network\Download and License Tool\Files with name dcn-nco.txt 4) Switch off the NCO and set dipswitch 1 of S3 to on, set all other switches to off 5) Switch on the NCO 6) Open a command prompt (start -> run -> cmd) and change to the following folder: C:\Program Files\Bosch\Digital Congress Network\Download and License Tool\Files 7) Download the NCO with the next command line FTP with the command: ftp -n -s:dcn-nco.txt x.x.x.x Where x.x.x.x is the IP-address of the NCO 8) Switch off the NCO and set the dipswitches all to off 9) Switch on the NCO 10) Start the Download and License Tool and start a NCO download. Switch off and on the CCU or NCO In case system units are added to the optical ring when the system is powered on, unexpected behavior can occur. Only connect units to the optical network when all units are powered off. Select the option “enabled” in menu 4b (network mode). Change the slave id “--" to a number. (refer to menu 7I Multi Mode). DCN Next Generation Release Notes Product/function INT-TX04/0816/32 INT-RX04/08/32 DCN-CCU DCN-CCU DCN-CCU LBB 4402/00 LBB 4404/00 PRS-4DEX4 INT-TX DCN-IDENC CNConfig Problem The transmitter displays the message “No Network” Charging indicator on the receiver is blinking DCN-CCU shows “Multi” while acting in “Single” Audio disruption during powering up/down a CCU in a Multi CCU system Loss of settings after reboot of NCO in a Multi CCU system Input routing does not work after download of optical devices Transmitter does not work after updating firmware DCN-IDENC ID card encoder in not recognized in DCNSW. Error during installation “…verify that you have access to the directory.” Bosch Security Systems| 2017-11-29 en | 16 Solution Connect a powered DCN Next Generation or DCN wireless system to the transmitter or select the option “standalone” in menu 4b (network mode) Check whether the receiver is still working correctly. If this is the case: the battery pack is fully charged and can be recharged after using it a while. If this is not the case: follow the instructions as given in the troubleshooting table. When changing from “single” to “multi” mode, the DCN-CCU can remain working in “single” mode. If this is the case follow next procedure: 1. Select “multi” on all connected CCUs 2. Switch off all CCUs. 3. Reset to defaults the NCO. 4. Switch on all CCUs. During powering up/down a CCU in a Multi CCU system the audio on the delegate units, connected to the remaining CCU’s, is shortly disrupted for 1 to 2 seconds. In case the Network Controller (NCO) in a Multi CCU system is rebooted, the settings and configurations changed during the past 30 seconds can be lost. When configuring interpreter desks wait minimum 30 seconds before reboot the NCO. Change all inputs to CH00 and then to the required channel. Update FPGA to version 2.03 or higher Alternative solution: Update firmware of the INT-TX to version 2.80 If other card readers/encoders are present or connected to the PC please disable them. Internal readers/encoders can be disabled in the BIOS or in the Windows Device Manager. Ensure that you have the required administrator rights. Restart installation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 16 Producer : doPDF Ver 8.4 Build 935 Create Date : 2017:11:29 13:18:48+01:00EXIF Metadata provided by EXIF.tools