Boschhome Bosch Appliances Smoke Alarm D9124 Users Manual Addressable Fire Control Panel (FACP)
D9124 to the manual 9cee768a-9221-4e98-89f7-11969fcfa7af
2015-01-21
: Boschhome Boschhome-Bosch-Appliances-Smoke-Alarm-D9124-Users-Manual-239554 boschhome-bosch-appliances-smoke-alarm-d9124-users-manual-239554 boschhome pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Fire Alarm Systems | D9124 Addressable Fire Alarm Control Panel (FACP) D9124 Addressable Fire Alarm Control Panel (FACP) ▶ 24 VDC, 4 A power for initiation circuits and NACs; 12 VDC, 1.4 A power for system accessories ▶ Up to eight supervised or 32 unsupervised remote annunciators ▶ One-man Fire Test Mode ▶ Schedules (Skeds function) service reminder for local systems ▶ Low battery, AC power supply, and battery lead supervision ▶ Dual phone line monitor The D9124 FACP controls complex alarm systems used in schools, universities, manufacturing plants, and health care facilities. Program it for fire, fire supervisory, intrusion, or access control applications. Program it locally using the D5200CE hand-held programmer or remotely using RPS over telephone lines or local-area or wide-area networks (LAN or WAN). The D9124 FACP is a modular assembly, installed in a red steel enclosure, which can be surface- or flush-mounted. The enclosure has keyed controller access making it suitable for installation in public access areas. Functions Alarm Verification The alarm verification feature reduces potential false alarms by requiring a reset and a second alarm signal from the device before the control panel raises an alarm condition. Auxiliary and Standby Power The 4 A, 24 VDC power supply charges the standby batteries and powers auxiliary devices. The power supply responds to low battery or battery disconnect conditions with a Trouble LED and a Trouble Relay for sounders or lights. Five system power trouble conditions are selected by DIP switches. They can be individually linked to a central station, or grouped to activate a trouble relay, allowing a single supervised address to monitor the power supply. A pair of 12 V batteries provides standby power. Two additional batteries provide standby power for initiating devices and notification appliances. All four batteries are housed within the panel enclosure. Note Batteries are not included in the D9124 and must be purchased separately. Central Station Communication Events can be communicated to a central station by the digital communicator or by adding an optional Ethernet interface module. The optional Bosch D6500 or D6600 NetCom Receiver and Modem IIIa2 reporting format provide individual point reporting to monitoring facilities. The D5500 Remote Programming Software (RPS) allows the following to be controlled from a central station: • • • • • • • Resetting notification appliances Activating or deactivating remote annunciation Activating or deactivating relays Supervising battery condition Setting point status and armed status Enabling or disabling reporting functions Shunting reporting points during servicing www.boschsecurity.com 2 | D9124 Addressable Fire Alarm Control Panel (FACP) Event Log Storage, Viewing, and Printing The D9124's memory log stores time, date, point, and user ID for up to 1000 events. Programming options allow restricting specific event reports to the central station receiver. A programming option allows the log to record certain functions entered at command centers. Certifications and Approvals Region Certification USA UL AMCX: Central Station Alarm Units (UL1610, UL1635), APAW: Police Station Alarm Units (UL365, UL464), UOJZ: Control Units, System (UL864) Display the 1000 events in memory at the fire system controller(s) or retrieve them with a single phone call by a central station using Bosch RPS version 3.7.025 or higher. FM The D9131A Parallel Printer Interface Module allows an onsite parallel printer to print events as they are stored in the log: recording time, date, account number, event, point ID, point text, and if the message was transmitted to a receiver. CSFM 7165-1615: 113 and 7170-1615: 144 July 2008 NYC-MEA 12-92-E, Vol. IV 12-92-E, Vol. IV Inputs The D9124 Control Panel is a 127-point addressable system that is expandable to 246 addressable points. The control panel receives information from alarm initiating points through integrated devices over a two-wire multiplex zone expansion system. Each addressable point accommodates both normally-open and normally-closed devices with endof-line (EOL) resistor supervision. Each point is programmable for fire, fire supervisory, intrusion, or access control applications. Outputs System notification appliance capacity can be extended beyond the two supervised circuits by adding D8129 Octorelay Modules. Up to 128 relay outputs can be operated through the controller or the central station, or they can be programmed for automatic operations. Notification appliances can be programmed for steady, pulsed, California March Time, or Temporal Code 3 patterns. Temporal Code 3 patterns can be synchronized using the appropriate synchronization modules. 12-92-E, Vol. X11 12-92-E, Vol. 12 Hong Kong HKFSD Installation/Configuration Notes Compatible Products The following products are compatible with the D9124 FACP: Category Product ID Product Description Batteries and Power Supply Products BATB-40 Battery box BATB-80 Battery box D126 12 V, 7 Ah standby battery D1218 12 V, 18 Ah standby battery D7038 Power supply address circuit module D285 Photoelectric smoke head D285TH Photoelectric smoke head with heat D298M Zonex smoke master base Detectors D298S Zonex smoke single base Notification Appliance Circuits (NACs) FMM-462 Manual station The D9124 FACP has two supervised, on-board NACs with individual circuit silencing. D603 Rate-of-rise heat detector head D604 Fixed (135°F) heat detector head User Interface D605 Fixed (190°F) heat detector head D720B/R Security and fire keypads D1255B/R Security and fire keypads D1256 Fire command center D1257 Remote fire alarm annunciator D1260 ATM keypad D125B Powered loop interface module (Dual, Class B) D129 Initiation circuit module (Dual, Class A) D130 Relay module D136 Plug-in relay D192C Bell supervision module D192E Bell supervision module A D1256 Fire Alarm keypad is visible and accessible behind a locked, clear sliding panel located on the enclosure door. It displays programmable text identifying specific initiating and supervisory devices. It also provides point annunciation, signal silence, trouble silence, detector reset, and annunciator reset. The sliding panel lock is keyed to match the Bosch manual pull stations for resetting the system. Also available as options are: • • • D1255R Security/Fire Keypad D1257 Remote Fire Alarm Annunciator D1260 Keypad Keypads and Annunciators Modules D9124 Addressable Fire Alarm Control Panel (FACP) | 3 Category Programming Products Product ID Product Description Technical Specifications D192G Bell supervision module D8125 POPEX module Environmental Considerations D8125MUX Zonex to dual multiplex interface D8128D OctoPOPIT module D8129 Octo-relay module Inputs D8130 Release module D9127U POPIT module (no tamper) Sensor Circuits: Up to two 8125 POPEX modules, 119 addresses per module D9127T POPIT module (tamper) Sensor Circuit Protection: D9131A Parallel printer interface module DX4020 Ethernet interface module Power limited to 4 A; short circuit, reverse polarity, thermal overload and current overload protection on-board D5200CE Handheld programmer Sensor Loop Technology: Four-wire addressable circuits RPS Remote Programming Software RPS-LITE Remote Programming Software RPS-INTL Remote Programming Software Relative Humidity: Up to 85%; non-condensing Temperature (operating): +32°F to +122°F (0°C to +50°C) Mechanical Properties Parts Included The D9124 Addressable Control Panel is shipped in three boxes. One box contains: Quant. Component 1 D9412GLTB Control Panel (less terminal blocks) Another box contains: Quant. Component 1 D9101 Enclosure Assembly with Door The third box contains a D9100 Accessory Module Carrier that includes the following: Quant. Component 2 D192C Indicating Circuit Supervision Modules 1 D928 Dual Phone Line Switcher 1 D8125 POPEX Module (additional optional) 1 D9142LC 24 VDC Power Supply The third box also contains: Quant. Component 1 D1256 Fire Alarm Keypad 1 D1601 Transformer 1 Wiring Harness 1 Wiring Harness for the D8125 POPEX Module 2 560 Ω Resistors (for D192C Modules) 2 D161 Dual Modular Telephone Cords 1 D162 Dual Modular Telephone Cord 1 Literature pack Color: Red Material: 16-gauge (1.5 mm) steel Dimensions (H x W x D) Enclosure Box: 36.1 in. x 22.1 in. x 3.2 in. (92 cm x 56 cm x 8.1 cm) Removable Door: 37.1 in. x 23.3 in. x 1.1 in. (94 cm x 59 cm x 2.8 cm) Outputs Off-board relays: Up to 16 optional D8129 Relay Modules (eight relay outputs per module) On-board NACs: Two; 1.8 A maximum per circuit Power Requirements Current (operating) Alarm + sensor load: 874 mA Idle: 412 mA Power (auxiliary): 24 VDC nominal at 1.8 A Power (primary): 120 VAC, 60 Hz, 360 VA Ordering Information D9124 Addressable Fire Alarm Control Panel (FACP) Up to eight supervised or 32 unsupervised remote annunciators D9124 Accessories D113 Battery Lead Supervision Module Supervises wiring connections for two 12 V batteries connected to the same set of charging terminals. D113 D122 Dual Battery Harness Harness with circuit breaker. Connects two batteries to a compatible control panel. D122 D135A Low‑battery Disconnect Module Disconnects the control panel from the battery when the battery level drops to 9.5 VDC. D135A www.boschsecurity.com 4 | D9124 Addressable Fire Alarm Control Panel (FACP) Ordering Information D127 Reversing Relay Module Reports two separate alarm conditions to the central station. D127 D136 Plug‑In Relay Maximum rating is 1 A at 24 VDC or 2 A at 12 VDC. Available individually (D136) or in a package of 25 (D136‑25). D136 D138 Mounting Bracket, Right Angle Used to mount accessory modules in D8103, D8108A, and D8109 enclosures. D138 Americas: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com © Bosch Security Systems Inc. 2010 | Data subject to change without notice T1113332363 | Cur: en-US, V5, 4 Jul 2010 Asia-Pacific: Represented by Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6258 5511 Fax: +65 6571 2698 apr.securitysystems@bosch.com www.boschsecurity.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Author : Bosch Security Systems Create Date : 2010:07:04 13:25:50+01:00 Modify Date : 2010:07:04 13:25:50+01:00 Creator : XSL Formatter V4.3 MR3 (4,3,2008,0819) for Windows Producer : Antenna House PDF Output Library 2.6.0 (Windows) Title : D9124 Addressable Fire Alarm Control Panel (FACP) Trapped : False Page Count : 4 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools