Bose 414255 Wireless Speaker User Manual Manual

Bose Corporation Wireless Speaker Manual

Manual.pdf

Bose® SoundLink® Bluetooth® speaker IIIOwner’s GuideFPO
2 - EnglishSafetyPlease read this guidePlease take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference.The lightning ash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufcient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owner’s guide.WARNINGS:• To reduce the risk of re or electrical shock, do not expose the product to rain or moisture.• Do not expose this apparatus to dripping or splashing, and do not place objects lled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a re hazard.• Do not place any naked ame sources, such as lighted candles, on or near the apparatus.• Do not use any charger other than that specically provided for use with the equipment.• The battery needs to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.• The battery pack gives its best performance when it is operated at normal room temperature (68°F +/- 23°F or 20°C +/- 5°C).• Do not leave a battery on prolonged charge when not in use.• Do not subject battery pack to mechanical shock.• In the event of uid from the battery leaks from the equipment, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.• Do not use any battery pack which is not designed for use with the equipment.• Keep battery pack clean and dry.• For battery replacement, please contact Bose Customer Service.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.Wi-Fi is a registered mark of the Wi-Fi Alliance.©2013 Bose Corporation. No part of this work may be reproduced, modied, distributed, or otherwise used without prior written permission.
English - 3SafetyWARNING: This product contains magnetic material. Please contact your physician if you have any questions on whether this might affect the operation of your implantable medical device.CAUTION: Make no modications to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance. NOTES:• The product label is located on the bottom of the product.• Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.• The AC power supply provided with this product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.• This product is intended to be used only with the AC power supply provided, or a Bose® AC power supply or charger designed for use with this product.Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Only use attachments/accessories specied by the manufacturer.10. Unplug this apparatus during lightning storms or when unused for long periods of time.11. Refer all servicing to qualied personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Information about products that generate electrical noiseThis device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antennas or transmitters.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 - English SafetyU.S.A. onlyNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.CanadaThis Class B digital apparatus complies with Canadian ICES-003.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Output power: 7 mW @ 2400-2483.5 MHzBose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and to all applicable EU directive requirements. The complete declaration of conformity can be found at www.Bose.com/complianceNames and Contents of Toxic or Hazardous Substances or Elements Part NameToxic or Hazardous Substances and ElementsLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent (CR(VI))Polybrominated Biphenyl (PBB)Polybrominated Diphenyl Ether (PBDE)PCBs X0 0 0 0 0Metal partsX0 0 0 0 0Plastic parts0 0 0 0 0 0Speakers X0 0 0 0 0Cables X0 0 0 0 0O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.Please complete and retain for your records.The serial and model number can be found on the bottom of the speaker.Serial number: ___________________________________________________________________Model number: __________________________________________________________________Purchase date: __________________________________________________________________We suggest you keep your receipt with this owner’s guide.
English - 5ContentsIntroductionOverview .............................................................................................................. 6Unpacking ........................................................................................................... 6OperationConnecting to AC power ................................................................................... 7Pairing and connecting a device to the speaker .......................................... 9First-time setup .......................................................................................... 9Adding another device to the speaker ................................................... 10Speaker memory ........................................................................................ 10Reconnecting a device .............................................................................. 10Switching to a different device ................................................................ 10Control buttons .................................................................................................. 11System status indicators ................................................................................. 12Connecting a device using the AUX connector ............................................ 13Operating on battery power ............................................................................ 14Checking the battery ................................................................................. 14Charging the battery ................................................................................. 14Battery protection mode .......................................................................... 14Tips on placing the speaker ............................................................................. 15Maintenance and CareTroubleshooting ................................................................................................ 16Replacing the battery ....................................................................................... 18Cleaning the speaker ........................................................................................ 18Contacting customer service .......................................................................... 18Technical information ...................................................................................... 18
6 - EnglishIntroductionOverviewThank you for purchasing the Bose® SoundLink® Bluetooth® speaker III. Enjoy music wirelessly from your smartphone, tablet, laptop, or other Bluetooth device anywhere you choose.Features• Wireless Bluetooth link eliminates the need to physically connect your Bluetooth device.• Rechargeable lithium-ion battery provides hours of Bose performance.• AUX connector lets you connect any music device directly to your speaker.• Pair up to six Bluetooth devices.• Easy grab-and-go mobility.UnpackingOpen the carton and remove the speaker and AC power supply. Depending on your region, the carton may also contain AC power adapters for the AC power supply. Be sure to save all of the packing materials. These provide the safest means for any necessary shipping or transporting of the system.If any part of the product appears to be damaged, do not attempt to use it. Contact your authorized Bose dealer immediately or call Bose Customer Service. For contact information, refer to the contact list at the end of this guide or visit http://global.Bose.com.SoundLink® Bluetooth® speaker III AC power supply AC power supply adapters
English - 7OperationConnecting to AC powerThe first time using your SoundLink® Bluetooth® speaker III, connect it to AC (mains) power and charge the battery for three hours. While the battery is charging, you can begin using the speaker.1. Depending on your AC power supply type:a. Extend the prongs from the AC power supply.Or, b. Slide the AC power adapter for your region onto the AC power supply.
8 - EnglishOperation2. Plug the power cord on the AC power supply into the DC connector on the back of the speaker.3. Plug the AC power supply into a live AC (mains) outlet.The speaker emits a tone to confirm connection to AC power, and charging begins. On the front of the speaker, the battery status indicator blinks yellow to show the battery is charging.
English - 9Pairing and connecting a device to the speakerBefore listening to music from your Bose® Soundlink® Bluetooth® speaker III, you must pair and connect your Bluetooth device to the speaker.First-time setupThe first time you turn on your speaker, it is ready to pair and connect your first device.1. Press Power to turn the speaker on. The Bluetooth status indicator on the speaker blinks blue to show the speaker is discoverable.2. On your device, turn Bluetooth on, locate the Bluetooth device list, and select the device named “Bose SLIII.” If your device prompts you for a passcode, enter “0000” (four zeros). BluetoothSettingsDevicesBluetooth ONConnectedBose SLIIIWhen pairing is complete and your device is connected to the speaker, the Bluetooth status indicator on the speaker changes from blinking blue to solid white and the speaker emits a tone.Note: If the speaker turns off after five minutes, it has not paired or connected with your device. Turn the speaker off and back on, and try pairing your device again. See “Troubleshooting” on page 16.Operation
10 - EnglishAdding another device to the speakerPair another device to the speaker by making the speaker discoverable.1. Press Bluetooth® on the speaker, so the Bluetooth status indicator blinks blue.2. On your device, turn Bluetooth on, locate the Bluetooth device list, and select the device named “Bose SLIII.” If your device prompts you for a passcode, enter “0000” (four zeros). When the device connects to the speaker, the Bluetooth status indicator turns to solid white.Note: You can switch between connecting/connected and discoverable by pressing Bluetooth on the speaker. Speaker memoryThe speaker can remember up to six paired devices. If you pair the speaker with an additional device, the device least recently connected is no longer paired with the speaker.Note: To clear the speaker memory of all devices, press and hold Bluetooth (about 10 seconds) until you hear a tone. All devices are cleared and the speaker becomes discoverable.Reconnecting a deviceWhen turned on, the speaker attempts to reconnect with a device in memory starting with the last connected device. If the last connected device is not available, the speaker connects to the next to last connected device, and so forth. The speaker searches for a paired device for approximately 30 seconds.Switching to a different deviceYou can switch the speaker from your connected device to another previously paired device. The device you are switching to must be in the speaker memory.1. On your previously paired device, make sure Bluetooth is turned on.2. Press Bluetooth on the speaker to make the speaker discoverable. The Bluetooth status indicator speaker blinks blue to show the speaker is discoverable.3. On your device, select “Bose SLIII” from the Bluetooth device list.The Bluetooth status indicator blinks white, while the speaker attempts to con-nect to the device.When the speaker and Bluetooth device have successfully connected, the Bluetooth status indicator changes from blinking to solid white and the speaker emits a tone.Operation
English - 11OperationControl buttonsControl buttons are located on the top of the speaker.Control button DescriptionPress to turn the speaker on or off.• When Bluetooth® is the selected source, the speaker attempts to reconnect to the last connected device. If there are no paired devices, the speaker becomes discoverable. See “Pairing and connecting a device to the speaker” on page 9. • If operating on battery power, press and hold to observe the battery status indicator. See “Checking the battery” on page 14.• If the speaker is not used within 30 minutes, the speaker automatically turns off to preserve battery power.Press to select the Bluetooth source.• The speaker attempts to connect to the last paired device. If there are no paired devices, the speaker becomes discoverable.• If Bluetooth is connecting/connected, press to set the speaker to discoverable to allow pairing with another Bluetooth device. Press again to go back to connecting mode.Press to listen to a device plugged into the AUX connector. See “Connecting a device using the AUX connector” on page 13.Press to mute/unmute sound from the speaker.Press to decrease the speaker volume incrementally. Press and hold to decrease the volume continuously.Press to increase the speaker volume incrementally. Press and hold to increase the volume continuously.
12 - EnglishOperationSystem status indicatorsStatus indicators illuminate to show when an audio source or speaker state is activated. Status indicators are located on the front of the speaker.Status indicator System statusIndicates the Bluetooth® state of the speaker when the Bluetooth source is selected. See “Pairing and connecting a device to the speaker” on page 9.• Blinking blue light – Discoverable and ready to pair with a device.• Blinking white light – Attempting to connect to a paired device.• Solid white light – Connected to a paired device. • Blinks as the volume of the speaker increases or decreases when Bluetooth is the source. When the indicator blinks twice, the maximum or minimum volume has been reached.• The speaker is playing the source connected to the AUX IN connector.• Blinks as the volume of the speaker increases or decreases when AUX is the source. When the indicator blinks twice, the maximum or minimum volume has been reached.Blinks when the sound is muted. Indicates the battery power level or the battery charging state. See “Checking the battery” on page 14.
English - 13OperationConnecting a device using the AUX connectorYou can use your speaker with any device that features a headphone or audio output. This feature requires using a stereo audio cable with a 3.5 mm plug on one end to connect to the AUX IN input on the speaker. This type of cable is available for purchase at electronics stores.To use the AUX IN connector:1. Plug the cable from your audio device into the AUX IN connector on the back of the speaker.2. Press Power on the speaker.3. Press AUX on the speaker.4. Adjust the volume on the connected device to near maximum, then use the speaker volume buttons to adjust the volume level.Notes:• If the connected device stops playing audio for 30 minutes, the speaker automatically turns off to conserve battery power.• The SERVICE connector on the back of the speaker is only for software updates. It cannot be used to connect an audio device.
14 - EnglishOperationOperating on battery powerBattery performance varies with the content played and the loudness at which it is played. In typical usage, the speaker battery lasts up to 14 hours.Checking the batteryWhen the speaker is turned on, the battery status indicator briefly illuminates, then turns off to conserve battery power. However, if the battery requires charging, the battery status indicator illuminates and continuously blink red until the speaker the speaker is connected to AC power and the battery begins charging.To check the battery charge level, press and hold Power on the speaker and observe the battery status indicator.Solid green Full chargeSolid yellow Medium chargeBlinking red Charging is neededCharging the batteryThe battery status indicator on the speaker blinks red when the battery needs charging. To charge the battery, connect the speaker to AC power (see “Connecting to AC power” on page 7). The speaker emits a tone to confirm the power connection. Recommended charging time is three hours to fully charge the battery. The battery status indicator indicates the charging status. You can use the speaker while charging the battery.Blinking yellow Battery is chargingSolid green Battery is fully chargedBattery protection modeWhen the speaker is unplugged and unused for more than 24 days, it enters battery protection mode to preserve battery power. To reactivate the speaker, connect it to AC power (see “Connecting to AC power” on page 7).
English - 15Tips on placing the speakerWhen using your speaker indoors, the tonal quality can vary depending on where the speaker is placed in a room. When using your speaker outdoors, you should expect the tonal quality to change as you move farther away from the speaker. Follow these guidelines when placing your speaker:• The speaker is designed to sound best when placed on a surface that is 24 to 48 inches high.• For best bass response, the back of the speaker should be placed near a wall, but not directly against a wall. Bass response decreases as the speaker is moved away from a wall. Do not lay the speaker on its back. Sound is emitted from both the front and the rear of the speaker.• Do not place the speaker in small areas where the speaker is enclosed on all sides except the front, as this will adversely affect sound quality.• Do not place the speaker on wet or dirty surfaces.Operation
16 - EnglishMaintenance and CareTroubleshootingProblem What to doSpeaker will not turn onIf using AC power, ensure:• Your system is connected to a working AC (mains) outlet.• You are using the Bose® AC power supply shipped with your speaker or a Bose accessory charger designed for the speaker.If using battery power, the battery may be in protection mode or discharged. Connect to a working AC outlet to restore the battery to operational mode and charge the battery.Cannot pair the speaker with my Bluetooth® device• Ensure your speaker is discoverable (Bluetooth status indicator blinks blue). See “Pairing and connecting a device to the speaker” on page 9.• Ensure Bluetooth is enabled on your device.• Ensure you have selected “Bose SLIII” in the Bluetooth device list on your device and the connection has been conrmed by your device.• Your Bluetooth device may be out of range. Try moving it closer to the speaker.• If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality.• Ensure your device supports the A2DP (stereo Bluetooth) prole.• When pairing and connecting to a PC or Mac computer, ensure you have selected the SoundLink® Bluetooth® speaker III as the audio output device within the audio settings menu of the computer. You may need to play an audio track to nalize the connection (see the computer manufacturer for detailed instructions).• Refer to the owner’s guide, help system, or technical support for your Bluetooth device to learn how it pairs with other Bluetooth devices.• Turn the speaker off and back on, and pair and connect your device. See “First-time setup” on page 9 and “Adding another device” on page 10.• Reset the speaker. Press and hold Mute on the speaker for ten seconds until all status indicators briey illuminate and the speaker turns off. Turn the speaker on again, and pair your device.• Check for updated software for your Bluetooth device, or go to owners.Bose.com for updates to the SoundLink® Bluetooth® speaker III.Paired Bluetooth device will not connect to the speaker• Ensure your speaker is discoverable (Bluetooth status indicator blinks blue). See “Pairing and connecting a device to the speaker” on page 9.• Ensure Bluetooth is enabled on your device.• Your device may be out of range. Try moving it closer to the speaker.• Turn your device off and back on, and connect it to the speaker. See “Reconnecting a device” on page 10.• If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality.• Reset the speaker. Press and hold Mute on the speaker for ten seconds until all status indicators briey illuminate and the speaker turns off. Turn the speaker on again, and connect your device. • Clear the speaker memory. Pair and connect the device to the speaker again. See “Speaker memory” on page 10 and “First-time setup” on page 9.
English - 17Maintenance and CareProblem What to doThe speaker indicates a connection, but is not playing music• Ensure the device you want to hear is connected to the speaker and playing audio.• Ensure the speaker is not muted and the speaker volume is turned up.• Turn up the volume on your device.• Your Bluetooth® device may be out of range. Try moving it closer to the speaker.• Move your device away from any device that generates electromagnetic interference, such as another Bluetooth device, cordless phone,microwave oven, or wireless router. • If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality and reconnect the device you want to hear.• Refer to the owner’s guide, help system, or technical support for your Bluetooth device to learn how it pairs with other Bluetooth devices.• Turn the speaker off and back on. • Reset the speaker. Press and hold Mute on the speaker for ten seconds until all status indicators briey illuminate and the speaker turns off. Turn the speaker on again, and connect your device.Poor sound quality from a Bluetooth deviceConnect your Bluetooth device to the speaker using the AUX connection. If sound quality improves using the AUX connection, try these solutions:• Your Bluetooth device may be out of range. Try moving it closer to the speaker.• Move your device away from any device that generates electromagnetic interference, such as another Bluetooth device, cordless phone,microwave oven, or wireless router.• Reduce the number of applications running on your device. Running multiple applications can reduce the amount of internal resources available to transmit audio. Closing non-essential applications may improve audio quality.• Try turning off Wi-Fi® on your device to improve audio quality.• Try clearing your device from the speaker by disabling Bluetooth on your device. Pair your device and the speaker again.• If your device is in your pocket, try placing it in open air, without your body between the device and the speaker.• Turn the speaker off and back on.• Reset the speaker. Press and hold Mute on the speaker for ten seconds until all status indicators briey illuminate and the speaker turns off. Turn the speaker on again, and pair and connect your device.• Check for updated software for your Bluetooth device, or go to owners.Bose.com for updates to the SoundLink® Bluetooth® speaker III.No audio or poor sound quality from an AUX device• Ensure your connected device is on and playing audio.• Ensure the 3.5 mm plug of the stereo cable is fully inserted into the speaker and the other end into the AUX device.• Press AUX on the speaker and ensure the AUX status indicator is on.• Ensure the speaker is not muted and the speaker volume is up.• If there is no sound, increase the volume level on the AUX device.• If sound quality is poor, reduce the volume level on the AUX device.• Try using a different AUX cable.
Maintenance and Care18 - EnglishReplacing the batteryThe battery should be replaced when:• The battery status indicator continues blinking yellow after ten hours of charging.• The period of battery operation noticeably decreases.Only Bose can replace the battery in your speaker. If you need a new battery, please contact the Bose organization in your country/region. For contact information, refer to the contact list at the end of this guide or visit http://global.Bose.com.Cleaning the speakerTo clean the exterior surface of your product, wipe it using a soft, dry cloth.• Do not use solvents, chemicals, or sprays.• Do not allow liquids to spill or objects to drop into any openings.Contacting customer serviceFor questions about the Bose® SoundLink® Bluetooth® speaker III, contact your local Bose dealer. For contact information, refer to the contact list at the end of this guide or visit http://global.Bose.com.Limited warrantyYour Bose® SoundLink® Bluetooth® speaker III is covered by a limited warranty. Details of the limited warranty are provided on the product registration card included in the carton. Refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights.Technical informationAC power supply ratingInput: 100 - 240V , 50/60 Hz, 600 mA Output: 17 VDC, 1A MaxInput power ratingInput: 17 - 20 VDC, 1A MaxDimensions5.2" H x 10" W x 1.9" D (13.5 cm x 25.6 cm x 4.8 cm)Weight3.03 lb (1.37 kg)Temperature range for use32° to 131°F (0° to +55°C)
English - 19USABose Corporation, The MountainFramingham, MA 01701-91681-800-901-0472Phone hours - ET (Eastern Time):Weekdays 8:30 a.m. to 8 p.m.Saturdays 9 a.m. to 3 p.m.owners.Bose.comCanadaBose Limited280 Hillmount Road, Unit 5Markham, OntarioCanada L6C 3A11-800-465-2673Phone hours - ET (Eastern Time):Weekdays 9 a.m. to 5 p.m.www.Bose.caAustraliaBose Pty Limited, Unit 3/2 Holker Street Newington NSW 2127TEL 1 800 061 046 (AU)TEL 008 501 511 (NZ)FAX 612 8737 9924www.Bose.com.auwww.Bose.com.nzBelgique/BelgiëBose N.V., Limesweg 2B-3700 TongerenTEL 012-259960FAX 012-390840www.Bosebelgium.beChinaBose Greater China Operations1st Floor, EYON Building, No. 118 East Dong Baoxing RoadShanghai 200080 P.R.C.People’s Republic of ChinaTEL 400-880-2266FAX 021-65105380DanmarkBose A/S, Industrivej 72605 BrøndbyTEL 04343-7777FAX 04343-7818www.Bose.dkDeutschlandBose GmbHKundenbetreuungNeuenhauser Str. 73D-48527 NordhornTEL 0800 2673444www.Bose.deFinlandBose FinlandKornetintie 6B00380 HelsinkiTEL 10 778 69 00FAX 10 778 69 09www.Bose.FranceBose S.A.S.12 rue de Témara78100 Saint Germain en LayeTEL 01 30 61 63 63FAX 01 30 61 63 60www.Bosefrance.frHong KongSuite 1203, Midas Plaza, 1 IaiYau Street, San Po KongKowloon, Hong KongTEL 852 2123 9000IndiaBose Corporation India Private LimitedThe Bose Service CentreC13, Ground FloorSDA Commercial ComplexCommunity CentreNew Delhi, India 110016TEL 1 800 102 2673FAX +91 11 47168650IrelandBose SMS Ltd.Castleblayney RoadCarrickmacross, Co MonaghanTEL 1-800-932-436FAX (042) 9671502www.Bose.ieItaliaBose S.p.A.Via della Magliana 87600148 RomaTEL 06 60 292 292www.Bose.itJapanBose K.K.Sumitomo Fudosan Shibuya Garden Tower 5F,16-17 Nampeidai-choShibuya-ku, Tokyo 150-0036TEL 0570-080-021FAX 03-5489-1041www.Bose.co.jpLuxemburgBose N.V.Limesweg 2B-3700 TongerenTEL +32 12 259 960FAX +32 12 390840www.Bosebelgium.beMexicoBose de Mexico S. de R.L. de C.V.Paseo de las Palmas # 405Despacho 204Lomas de ChapultepecC.P. 11000, Mexico D.F., MexicoTEL +52 (55) 52 02 35 45TEL +52 (55) 52 02 41 95FAX +52 (55) 52 02 37 28www.Bose.com.mxNederlandBose B.V.Nijverheidstraat 81135 GE EdamTEL 0299-390290FAX 0299-390109consumenteninfo@Bose.comwww.Bose.nlNew ZealandTEL 0800 501 511www.Bose.co.nzNorgeBose A/SKongsvinger Festning2213 KongsvingerTEL +47 62 82 75 00FAX +47 62 82 15 69PolandBose sp. z o.o.ul. Woloska 1202-675 WarszawaTEL 22-852-2928FAX 22-852-2927www.Bose.plÖsterreichBose Ges.m.b.H.Vienna Business Park Wienerbergstrasse 7 (10.OG)A-1100 ViennaTEL 01-60404340FAX 01-604043423www.Bose.atSchweizBose AGHauptstrasse 1344450 SissachTEL 061-9757733FAX 061-9757744www.Bose.chSverigeBose A/SJohannefredsgatan 4S-43153 MölndalTEL +46 774 - 450 450FAX +46 31 - 274 89 15United KingdomBose Limited1 Ambley GreenGillingham Business ParkGillingham, Kent ME8 ONJTEL 0800 081 3569FAX 0870-741-4545www.Bose.co.ukWorld Wide Webwww.Bose.comwww.Bose.euglobal.Bose.comBose Corporation
©2013 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM373985 Rev. 00

Navigation menu