Contents
- 1. User Manual 1 of 3
- 2. User Manual 2 of 3
- 3. User Manual 3 of 3
User Manual 1 of 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2306318 |
| Application ID | PumACHRr1bmKpjU5/2M7hA== |
| Document Description | User Manual 1 of 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 444.21kB (5552565 bits) |
| Date Submitted | 2014-06-25 00:00:00 |
| Date Available | 2014-12-15 00:00:00 |
| Creation Date | 2014-06-25 14:59:14 |
| Producing Software | Adobe Acrobat Pro 11.0.0 |
| Document Lastmod | 2014-06-25 14:59:30 |
| Document Title | User Manual 1 of 3 |
| Document Creator | Adobe InDesign CC (Windows) |
CineMate® 520 home theater system Owner's Guide │ Guía del usuario │ Notice d’utilisation Important Safety Information Please read this owner’s guide carefully and save it for future reference. he lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in the owner’s guide. WARNINGS: • To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. •D o not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the product. Exposure to liquids may create a failure and/or fire hazard. • Replace only with a AA (IEC LR06) alkaline battery (or batteries). • Do not place naked flame sources, such as lighted candles, on or near the product. CAUTIONS: • Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty. • Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended periods. WARNING: Contains small parts which may be a choking hazard. Not suitable for children under age 3. WARNING: This product contains magnetic material. Contact your physician if you have questions on whether this might affect the operation of your implantable medical device. NOTES: • The product label is located on the bottom of the console. • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. • This product must be used indoors. It is neither designed nor tested for use outdoors, in recreational vehicles, or on boats. • The speaker wire and interconnect cables included with the system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in-wall installation. ose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance 2 - English Important Safety Information Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power supply or cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this apparatus during lightning storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way: such as power supply or cord is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B) / NMB-3 (B) This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters. The temperature range of this product is 32ºF (0ºC) to 113ºF (45ºC). This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. English - 3 Important Safety Information Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI)) Polybrominated Biphenyl (PBB) Polybrominated diphenylether (PBDE) PCBs Metal parts Plastic parts Speakers Cables Part Name O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006. Please complete and retain for your records: Serial numbers can be found on the Acoustimass® module’s connector panel and on the packaging for the remote control. Module serial number:_________________________________________________________________ Remote serial number:_________________________________________________________________ Console serial number:_________________________________________________________________ Purchase date:________________________________________________________________________ We suggest you keep your receipt with this owner’s guide. Blu-ray Disc™ and Blu-ray™ are trademarks of the Blu-ray Disc Association. HDMI is a trademark or registered trademark of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,956,674; 5,974,380 and 6,487,535 & other worldwide patents issued & pending. DTS, the DTS Symbol and DTS + the DTS Symbol are registered trademarks & the DTS logos are trademarks of DTS, Inc. Product includes software. ©2010 DTS, Inc. All Rights Reserved. SoundTouch and the wireless note design are trademarks of Bose Corporation in the U.S. and other countries. Wi-Fi is a registered mark of the Wi-Fi Alliance. ©2014 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission. 4 - English Contents Introduction About your CineMate® 520 home theater system.......................................................... 7 System Features............................................................................................................ 7 Introducing SoundTouch™ from Bose® ..................................................................... 7 Unpacking the system.......................................................................................................... 8 Placement guidelines........................................................................................................... 9 Sample system placement.......................................................................................... 9 Setting Up the Acoustimass® Module Attaching the rubber feet to the Acoustimass module................................................. 10 Connecting the Acoustimass module to power.............................................................. 11 Setting Up the Speakers Connecting the front speakers........................................................................................... 12 Connecting the rear speakers............................................................................................. 13 Wall mounting the speakers............................................................................................... 13 Setting Up the Console Connecting the console to your TV’s HDMI ARC connector........................................... 14 TVs without an HDMI ARC connector................................................................................ 15 Use a secondary connection in the following configurations.............................. 15 Connecting the console to other sources......................................................................... 15 Connecting to non-HDMI compatible sources................................................................. 16 Audio-only sources....................................................................................................... 16 Connecting the console to power....................................................................................... 16 Starting Up the System Installing the remote control’s batteries.......................................................................... 17 Powering on the system...................................................................................................... 17 Finishing Setup Checking for sound................................................................................................................ 18 Changing the language on the console............................................................................. 18 Running the ADAPTiQ® audio calibration......................................................................... 19 English - 5 Contents Using the System Remote control buttons....................................................................................................... 20 Programming the universal remote control.................................................................... 21 Consumer Electronics Control.................................................................................... 21 Test your HDMI-connected sources for CEC............................................................. 22 Program the remote to control your source............................................................. 23 Source selection.................................................................................................................... 24 Select a source connected to the Bose® system..................................................... 24 Select a source connected to your TV....................................................................... 24 Universal source buttons and console connectors......................................................... 24 Adjusting the volume........................................................................................................... 25 Function buttons................................................................................................................... 25 Programming a non-Bose remote control........................................................................ 25 Getting System Information from the Display Understanding messages on the display......................................................................... 26 Using the System menu.............................................................................................. 26 Error messages.............................................................................................................. 28 Acoustimass module status indicator.............................................................................. 28 Care and Maintenance Troubleshooting.................................................................................................................... 29 If your console cannot find the Acoustimass® module.......................................... 30 Factory reset the system............................................................................................. 31 Reset a source button on the remote control.......................................................... 31 Service connectors on the Acoustimass® module.................................................. 31 Cleaning................................................................................................................................... 32 Customer service................................................................................................................... 32 Limited warranty................................................................................................................... 32 Technical information........................................................................................................... 32 6 - English Introduction About your CineMate® 520 home theater system The CineMate 520 system delivers spacious, true 5.1 surround sound from small, high-performance speakers for consistent audio performance regardless of content, source or room layout. System Features • Advanced Bose audio processing provides natural and lifelike sound. • ADAPTiQ® audio calibration optimizes sound quality. • Display provides access to system settings and information. • HDMI™ connectivity allows easy setup and ensures high-quality audio from your connected sources. • Supports Consumer Electronics Control (CEC). • Programmable universal remote can control your TV, cable/satellite box and other connected sources. • Hideaway wireless Acoustimass® module provides impactful bass sound. • Speakers can be mounted on the wall or floor stands (kit available separately). • Supports the SoundTouch™ wireless adapter (available separately). Introducing SoundTouch™ from Bose® With the SoundTouch™ wireless adapter (available separately), you can stream Internet radio, music services (where available) and your music library. If you have Wi-Fi® at home, you’re ready to enjoy your favorite music in any room you want. Key Benefits • Enjoy wireless access to Internet radio, music services and your music library. • Stream your favorite music easily with personalized Presets. • Works with your existing Wi-Fi® network. • Free SoundTouch™ app for your computer, smartphone or tablet provides more powerful control. • Simply add additional systems at any time for a multi-room listening experience. • Wide selection of Bose audio systems lets you choose the right solution for any room. English - 7 Introduction Unpacking the system Carefully unpack the carton and confirm that the following parts are included: Acoustimass® module (4) Speakers Acoustimass power cord Center speaker Console power cord Universal remote control Console Front speaker cable HDMI cable Rear speaker cable ADAPTiQ® headset Rubber feet The appropriate power cords for your region are supplied. Note: If part of the system is damaged, do not use it. Contact your authorized Bose® dealer or Bose customer service. Refer to the contact sheet in the carton. 8 - English Introduction Placement guidelines o avoid wireless interference, keep other wireless equipment away from the system. Place the system outside of and away from metal cabinets, away from other audio/video components and away from direct heat sources. Acoustimass® module • Stand the Acoustimass module on its rubber feet along the same wall as your TV, or along any other wall in the front third of the room. • Choose a stable and level surface. Vibration can cause the Acoustimass module to move, particularly on smooth surfaces like marble, glass or highly polished wood. • Make sure there is an AC (mains) outlet nearby. Front speakers • Place one speaker to the left and one speaker to the right of the TV. • Keep each speaker within 3 ft. (1 m) of the TV, if possible. • If placing the speakers in an enclosed bookcase shelf, position them at the front edge of the shelf. Center speaker • Place the center speaker on a stable and level surface directly above or below your TV. Rear speakers • Place the rear speakers toward the back of the room behind you at ear height (when seated) or higher, if possible. Console • Place the console near your TV. Do NOT place the TV on top of your console. • Make sure there is an AC (mains) outlet nearby. SoundTouch™ wireless adapter (available separately) • Place the SoundTouch™ wireless adapter within 1−6 ft. (.3−1.8 m) of the console. • If you have the SoundTouch™ wireless adapter, you can begin set up. Refer to the SoundTouch™ wireless adapter’s owner’s guide for more information. Note: Do not connect the adapter to the console until prompted by the SoundTouch™ app. Sample system placement English - 9 Setting Up the Acoustimass® Module Attaching the rubber feet to the Acoustimass module Attach the rubber feet to the Acoustimass module to protect your floor. 1. Turn the Acoustimass module upside down onto a soft surface to protect it from being damaged. 2. Attach the rubber feet to the bottom of the Acoustimass module. Rubber foot Bottom of Acoustimass module 3. Place the Acoustimass module on its feet. Caution: Do not place the Acoustimass module on its front, back end, side or top when in use. 4. Remove all protective films. These may affect acoustic performance if left in place. 10 - English Setting Up the Acoustimass® Module Connecting the Acoustimass module to power 1. Plug the power cord into the 2. Plug the power cord into an AC (mains) outlet. connector on the Acoustimass module. English - 11 Setting Up the Speakers Connecting the front speakers 1. Insert the front speaker cable’s L plug into the left speaker. 2. Insert the front speaker cable’s C plug into the center speaker. 3. Insert the front speaker cable’s R plug into the right speaker. 4. Insert the other end of the front speaker cable into the 6-pin Speaker Connections connector on the console. 12 - English Setting Up the Speakers Connecting the rear speakers 1. Insert the rear speaker cable’s LR plug into the left rear speaker. 2. Insert the rear speaker cable’s RR plug into the right rear speaker. 3. Insert the other end of the rear speaker cable into the 4-pin Speaker Connections connector on the console. Wall mounting the speakers ou can mount the speakers on wall brackets, floor stands or table stands. To purchase these accessories, contact your local Bose dealer or visit www.Bose.com CAUTION: Do not use any other hardware to mount the speakers. English - 13 Setting Up the Console Connecting the console to your TV’s HDMI ARC connector Use the Bose® HDMI cable to connect the console to your TV. 1. Disconnect your HDMI-connected sources, such as a cable/satellite box, DVD or Blu-ray Disc™ player or game system, from your TV. 2. Insert one end of the Bose® HDMI cable into the TV connector on the console. 3. Insert the other end of the HDMI cable into your TV’s HDMI connector. Note: Use your TV’s HDMI connector labeled ARC or Audio Return Channel if available. If your TV does not have an HDMI ARC connector, see page 15. 14 - English Setting Up the Console TVs without an HDMI ARC connector If your TV does not have an HDMI ARC connector, you may need to make a secondary connection to the console with an optical, coaxial or analog stereo audio cable. Without this secondary connection, you may not hear audio from the Bose® system. Use a secondary connection in the following configurations • You are using internal sources (such as Internet applications or an over-the-air antenna). • You are connecting sources to your TV. Refer to your TV owner’s guide for more information. Tip: If your TV has IN and OUT audio connector panels, use audio OUT for your secondary connection. Connecting the console to other sources You can connect the console to other sources, such as a cable/satellite box, DVD or Blu-ray Disc™ player or game system with an HDMI cable (available separately). If your source is non-HDMI compatible, use different audio and video cables (see page 16). 1. Insert one end of an HDMI cable into your source’s HDMI (OUT) connector. 2. Insert the other end of an HDMI cable into the appropriate HDMI connector on the console. For example, to connect a game system, connect an HDMI cable to the GAME connector. Connect other sources to the appropriate HDMI connector on the console. English - 15 Setting up the Console Connecting to non-HDMI compatible sources If your source is non-HDMI compatible, connect it to your TV using audio and video cables (available separately). Refer to your TV owner’s guide for more information. Tip: If your source has IN and OUT audio connector panels, use audio OUT. Audio-only sources If your audio-only source, such as a media or CD player, is non-HDMI compatible, connect it to the console’s optical, coaxial or analog connector. You can use an optical, coaxial or analog cable (available separately). Note: After connecting your audio-only source, you must set the optical, coaxial or analog input for the appropriate source. You can access these settings using the System menu (see page 26). Connecting the console to power 1. Plug the power cord into the Power 2. Plug the power cord into an AC (mains) outlet. 16 - English connector on the console. Starting Up the System Installing the remote control’s batteries 1. Slide open the battery compartment cover on the back of the remote control. 2. Insert the two provided AA (IEC-LR6) 1.5V batteries. Match the + and – symbols on the batteries with the + and – markings inside the compartment. 3. Slide the battery compartment cover back into place. Powering on the system Press on the remote. The console powers on. The display defaults to CBL SAT for first time power on. Otherwise, the display defaults to your last used source. Note: The system powers off after sixteen minutes of inactivity. You can disable AUTO OFF using the System menu (see page 26). English - 17 Finishing Setup Checking for sound 1. Power on your TV. 2. If you are using a cable/satellite box or other secondary source, power on this source. Tip: If your secondary source is connected to your TV, select the appropriate TV input. You may need to use a different remote. 3. Power on the system. 4. Press the appropriate source button. 5. Check if sound is coming from the Bose® speakers. Note: If you do not hear sound from the Bose speakers, see “Troubleshooting” on page 29. 6. Press on the remote control. Check that no sound is coming from the TV speakers. Note: If you hear sound coming from your TV speakers, see “Troubleshooting” on page 29. Changing the language on the console Use the remote control to change the language on the console. 1. Power on the system. 2. Press 3. Press until 10 LANGUAGE 4. Press and 5. Press on the remote control. to select your language. Tip: Look for the language. 18 - English appears on the display. icon in the System menu if you select the wrong Finishing Setup Running the ADAPTiQ® audio calibration The ADAPTiQ audio calibration customizes the sound of the system to the acoustics of your listening area by taking five audio measurements. To perform an audio calibration, you need 10 minutes when the room is quiet. 1. Put the ADAPTiQ headset on your head. During the ADAPTiQ audio calibration, a microphone on the top of the headset measures the sound characteristics of your room to determine optimal sound quality. 2. Insert the ADAPTiQ headset cable into the 3. Press 4. Press connector on the console. on the remote control. until 14 ADAPTiQ appears on the display. 5. Press 6. Follow the voice prompts until the system completes the process. 7. Unplug the ADAPTiQ headset from the console and store it in a safe place. Note: If you move the system or any furniture, run ADAPTiQ again to ensure optimal sound quality. English - 19 Using the System Remote control buttons Use the remote to control sources connected to your system, adjust the system volume, change channels, use playback functions, enable cable/satellite box functions and navigate the System menu. Source selection Selects a source connected to your TV Toggles between SoundTouch™ (available separately) and connector Powers on/off the Bose® system Powers on/off a selected source Navigation pad Lists recorded DVR programs System menu Displays the Internet TV home page Previous channel, chapter or track Playback controls TV aspect ratio Teletext mode Closed captioning 20 - English Function buttons (see page 25) Using the System Programming the universal remote control You can use the remote to control your TV, cable/satellite box, DVD or Blu-ray Disc™ player, game system, DVR or other auxiliary source. Consumer Electronics Control The system supports Consumer Electronics Control (CEC). CEC allows you to control multiple HDMI-connected sources without programming the remote. You can turn on/off CEC using the System menu (see page 26). Your source may support CEC, but refer to it with a different name. Refer to your source owner’s guide for more information. CEC controls sources connected to the console’s HDMI connectors. Tip: You may need to use your source’s system menu to enable CEC. Refer to your source owner’s guide for more information. English - 21 Using the System Test your HDMI-connected sources for CEC Test each of your sources for CEC using the remote control. Note: Your HDMI-connected source may not support CEC. Refer to your source owner’s guide for more information. 1. Power off the Bose® system. 2. Prepare your source: • If you are testing your TV, power off your TV. • If you are testing another source, power off the source. Power on your TV. 3. Press the button for the source you are testing. The source button glows. The source and system power on. 4. To ensure your source works properly with your remote control, press a variety of buttons that correspond with your source’s functions. If your source does not perform one of the functions, program the remote control (see page 23). 22 - English Using the System Program the remote to control your source If your source does not support CEC, you can program the remote to control your source. 1. Power on your source. 2. Locate the code for your source’s brand in the Universal Remote Device Codes book (provided). 3. On the remote control, press and hold the appropriate source button until all six source buttons glow, then release. For example, to program your TV, press and hold Only the appropriate source button glows. 4. On the number keypad, enter the code for your source’s brand. Note: If all six buttons blink three times, you entered an invalid code. Repeat steps 3 and 4. 5. Press + on the volume button. 6. Test the source for basic functions: • TV: press the channel buttons. Press Press and to navigate. • Cable/satellite box: press Press and to navigate. . The programming guide appears. • DVD or Blu-ray Disc™ player: press Press and to navigate. • Game system: press 7. and . The settings menu appears. . The settings menu appears. to navigate through your menu. If your source responds to basic functions, press your settings. to save If your source does not respond Use the remote control’s code scanner to find the code for your source. 1. Press + on the volume button to try another code. Note: If all six buttons blink three times, you have cycled through all codes for your source. 2. Test the source for basic functions (see step 6 in “Program the remote to control your source”). 3. Repeat steps 1 and 2 until your source responds. 4. Press to save your settings. Note: Your source may not be compatible with universal remote controls. Refer to your source owner’s guide for more information. English - 23 Using the System Source selection You can switch between sources by pressing the appropriate source button on the remote control. Before you begin, program the remote to control your source (see page 23). Select a source connected to the Bose® system If your source is connected to the console and does not use CEC, follow this procedure to set the console to the appropriate mode and turn on the source. 1. Power on the system. 2. Press the button for the source you want to control. The source button glows. 3. Press The source powers on. Select a source connected to your TV If your source is connected to your TV, follow this procedure to select the appropriate TV input. 1. 2. Power on the system, your TV and the appropriate source. Press to select the correct input on your TV. You may need to press the source. several times to select the TV input for On some TVs, displays a menu. Use the remote control to choose the correct TV input and close this menu. Universal source buttons and console connectors The source buttons on your remote control correspond with the connectors on the back of the console. For example, corresponds with the BD-DVD HDMI connector. Your source buttons work with any source that is connected to the corresponding connector. If you have a secondary DVD or Blu-ray Disc™ player and connect it to the CBL-SAT connector, it can be programmed to work with If you are using the optical, coaxial, or analog connectors, you must set the input for the appropriate source. You can access these settings using the System menu (see page 26). 24 - English Using the System Adjusting the volume On the remote control: • Press + to increase the volume. • Press – to decrease the volume. • Press to mute or unmute the audio. Note: If you hear sound coming from your TV, see “Troubleshooting” on page 29. Function buttons The red, green, yellow and blue buttons on the remote control correspond with the color-coded function buttons on your cable/satellite box or teletext functions. • Cable/satellite box functions: refer to your cable/satellite box owner’s guide. • Teletext functions: correspond with color-coded page numbers, headings or shortcuts on a teletext display. Programming a non-Bose remote control You can program a non-Bose remote control, such as your cable/satellite box remote, to control the system. Refer to your non-Bose remote control owner’s guide or cable/satellite website for instructions. Once programmed, the non-Bose remote controls basic functions such as power on/off and volume. English - 25 Getting System Information from the Display Understanding messages on the display The display on the front of the console allows you to access the System menu and shows system information and icons. Using the System menu Use the System menu to adjust audio levels, turn on/off features (such as AUTO OFF), change the language, set the coaxial, analog and optical inputs for a particular source, run ADAPTiQ®, pair your Acoustimass® module with the console or factory reset the system. 1. Press 2. Press and to scroll through the System menu. 3. Press and to adjust the settings. 4. Press on the remote. Display System state 1 AUDIO COMP Off: (Default) No change to audio track. Enhance dialogue: Increases the level of dialogue and sound effects at low volume settings while providing full audio impact at high volume settings. Smart volume: Reduces the range of volume levels in a movie soundtrack so the difference between extremely loud outbursts and soft sounds is less noticeable. 2 AUDIO/VIDEO SYNC Adjusts the audio delay to synchronize audio and video. 3 HDMI-CEC On: (Default) Enables CEC (see page 21). Off: Disables CEC. 4 AUTO OFF Enable: (Default) The system powers off after sixteen minutes of inactivity (no sound coming from the system). Disable: The system will not automatically power off. 5 SIDE AUX Audio in: (Default) Sets the source. connector for an auxiliary Headphones: Sets the connector as a headphones input. Note: If set to Headphones input and a cable is connected, the speakers are muted. Disconnect your headphones when not in use. 6 BASS LEVEL Adjusts bass level. 7 TREBLE LEVEL Adjusts treble level. 8 CENTER LEVEL Increases or decreases the level of dialogue for movies and TV. 26 - English Getting System Information from the Display Display System state 9 SURROUND LEVEL Adjusts the volume of the rear speakers relative to front speakers. 10 LANGUAGE Changes the language on the console and ADAPTiQ®. 11 SET OPTICAL INPUT Sets the optical connector to Auto/TV (Default), CBL SAT, BD DVD, GAME or AUX source. 12 SET COAXIAL INPUT Sets the coaxial connector to Auto/TV (Default), CBL SAT, BD DVD, GAME or AUX source. 13 SET ANALOG INPUT Sets the analog connector to Auto/TV (Default), CBL SAT, BD DVD, GAME or AUX source. 14 ADAPTIQ Starts the ADAPTiQ audio calibration process. 15 PAIR ACOUSTIMASS Reconnects the Acoustimass® module to the system. 16 FACTORY RESET Sets the System menu and ADAPTiQ to the factory settings. English - 27 Getting System Information from the Display Error messages Display System state ERROR Cannot find Acoustimass The Acoustimass® module is not connected to the console.No signal The source is not connected to the console, or the source is connected to the console and powered off. SIDE AUX Nothing connected The source is not connected to the the console. ERROR Call Bose Call Bose® customer service. Refer to the contact sheet in the carton. connector on Acoustimass module status indicator The status indicator on the back of the Acoustimass module provides information on system activity. Indicator activity Acoustimass module state Amber Connected to the console. Blinking amber Disconnected from the console. Slow blinking amber Available to make a wireless connection to the console. Red System error. 28 - English Care and Maintenance Troubleshooting Problem What to do No power • Secure the Acoustimass® module’s and console’s power cords. • Reconnect the Acoustimass module’s and console’s power cords firmly into an AC (mains) outlet. • Use the remote control to power on the system. • Factory reset the system (see page 31). No sound • • • • • • • • • • • • Sound is • coming from your TV • speakers • Remote control is inconsistent or does not work Unmute the system. Increase the volume. Plug the Acoustimass module and console into a live AC (mains) outlet. Insert the HDMI cable into a connector on your TV labeled ARC or Audio Return Channel. If your TV does not have an HDMI ARC connector, use a secondary audio cable in addition to the HDMI cable (see page 15). If using a secondary audio cable, insert the cable into a connector on your TV labeled Output or OUT, not Input or IN. Secure all cable connections on the speakers, TV and connected sources. If your source is connected to your TV, select the correct TV input (see page 24). Disconnect headphones when not in use. connector, enable Audio in If connecting your source through the using the System menu (see page 26). If you are connecting headphones to the connector, enable Headphones using the System menu (see page 26). If you see the error message Cannot find Acoustimass, pair the Acoustimass module with the console (see page 30). Factory reset the system (see page 31). Insert the HDMI cable into a connector on your TV labeled ARC or Audio Return Channel (if available). Turn off your TV speakers (refer to your TV owner’s guide). Decrease your TV volume to its lowest setting. • Match the + and – symbols on the batteries with the + and – markings inside the compartment (see page 17). • Replace the battery (see page 17). • Press the volume button on the remote control and see if the correct source button flashes. • If using CEC: -- Point the remote control at the console. -- Program the remote to control your source (see page 23). • If you have programmed the remote to control your source: -- Point the remote control at the appropriate source. -- Ensure you have entered the correct code for your source’s brand. -- Program the remote with another code (see page 23). English - 29 Care and Maintenance Problem What to do Poor or distorted sound • Remove all protective films from the system. • Secure all cable connections on the speakers, TV, and connected sources. • If you see the error message Cannot find Acoustimass: -- Plug in the Acoustimass® module. -- Pair the Acoustimass module with the console (see “If your console cannot find the Acoustimass® module”). connector, decrease the volume on your source. • If using the analog or • Factory reset the system (see page 31) and run the ADAPTiQ® audio calibration (see page 19). Intermittent sound • Secure all cable connections on the speakers, TV, and connected sources. • Move system away from potential interference, such as a wireless router, cordless phone, television, microwave, etc. If your console cannot find the Acoustimass® module The Acoustimass module and console are paired at the factory. However, if you see the error message Cannot find Acoustimass on the display, perform this pairing procedure: 1. Unplug the Acoustimass module. 2. Press 3. Press 4. Press Plug in Acoustimass appears on the display. 5. Plug the AC power cord into an AC (mains) outlet. After the Acoustimass module connects to the console, Pairing complete appears on the display. 30 - English on the remote control. until 15 PAIR ACOUSTIMASS appears on the display. Care and Maintenance Factory reset the system To troubleshoot problems, reset the System menu and ADAPTiQ® to the factory settings. 1. Press 2. Press 3. Press 5. The system resets. 4. Run the ADAPTiQ audio calibration (see page 19). on the remote control. until 16 FACTORY RESET appears on the display. Reset a source button on the remote control If you are experiencing problems with a source button on the remote control, reset the source button to the factory settings. After performing this procedure, your source button is in CEC mode. 1. On the remote control, press and hold the appropriate source button until all six source buttons glow, then release. Only the appropriate source button glows. 2. On the number keypad, enter 0140. Service connectors on the Acoustimass® module The Service and Data connectors are for service use only. Do not insert any cables into these connectors. English - 31 Care and Maintenance Cleaning • Clean the surface of the system with a soft, dry cloth. • Do not use any sprays near the system. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia or abrasives. • Do not allow liquids to spill into any openings. Customer service For additional help, contact Bose® Customer Service. Refer to the contact sheet in the carton. Limited warranty Your system is covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is in the carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights. The warranty information provided with this product does not apply in Australia and New Zealand. See our website at www.bose.com.au/warranty or www.bose.con.nz/warranty for details of the Australia and New Zealand warranty. Technical information Acoustimass® module Power rating: 100-240V 50/60Hz 150W Console Power rating: 100-240V 50/60Hz 60W 32 - English Care and Maintenance English - 33 Información de seguridad importante Lea atentamente esta guía del usuario y guárdela para consultarla en el futuro. l símbolo de relámpago con punta de flecha dentro de un triángulo equilátero indica al usuario que la caja del sistema puede contener una tensión sin aislar de magnitud suficiente para constituir un riesgo de descarga eléctrica. El signo de exclamación dentro de un triángulo equilátero avisa al usuario de que existen instrucciones de operación y mantenimiento importantes en la guía del usuario. ADVERTENCIAS: • Con el fin de reducir el riesgo de descarga eléctrica, no exponga este producto a la lluvia o humedad. • No exponga este aparato a salpicaduras o goteo. No coloque encima o cerca del aparato objetos que contengan líquidos, como jarrones. Al igual que con cualquier producto electrónico, evite que se derramen líquidos en los componentes del producto. La exposición a líquidos puede provocar averías o riesgo de incendio. • Sustituya las pilas únicamente por pilas alcalinas AA (IEC LR06). • No coloque sobre el producto o cerca de éste llamas vivas, como por ejemplo, velas. PRECAUCIONES: • No realice modificaciones no autorizadas del producto; en caso contrario puede poner en riesgo la seguridad, el cumplimiento normativo, el rendimiento del sistema y anular la garantía. • La exposición prolongada a música a gran volumen puede causar lesiones auditivas. Evite utilizar los auriculares a un volumen extremo, en especial durante largos periodos de tiempo. ADVERTENCIA: Contiene piezas pequeñas que pueden suponer riesgo de asfixia. No adecuado para niños menores de 3 años. ADVERTENCIA: Este producto contiene material magnético. Consulte a su médico si tiene alguna duda acerca de los efectos que esto pudiera tener en el funcionamiento de un dispositivo médico implantado. NOTAS: • La etiqueta del producto se encuentra en la base de la consola. • Si se utiliza la clavija de red o el conector del aparato como dispositivo de desconexión, deberá poder accionarse fácilmente. • Este producto debe utilizarse en espacios interiores. No está diseñado ni ha sido probado para uso al aire libre ni en embarcaciones. • El cable del altavoz y los cables de interconexión incluidos con el sistema no están homologados para instalación dentro de la pared. Consulte las normas de construcción locales para conocer el tipo correcto de cables requeridos para instalación dentro de la pared. ose Corporation declara por la presente que este producto cumple los requisitos esenciales y otras disposiciones relevantes de la Directiva 1999/5/CE y todos los demás requisitos de directivas aplicables de la UE. Encontrará la declaración de conformidad completa en www.Bose.com/compliance 2 - Español Información de seguridad importante Instrucciones de seguridad importantes 1. 2. 3. 4. 5. 6. 7. 8. Lea las siguientes instrucciones. Guarde estas instrucciones. Tenga presentes todas las advertencias. Siga todas las instrucciones. No utilice este aparato cerca del agua. Límpielo solo con un trapo seco. No bloquee las aberturas de ventilación. Realice la instalación de acuerdo con las instrucciones del fabricante. No lo instale cerca de fuentes de calor, tales como radiadores, salidas de aire caliente, cocinas u otros aparatos (incluidos amplificadores) que generen calor. 9. Proteja el cable o la fuente de alimentación de forma que nadie lo pise ni quede pinzado, en particular cerca de enchufes, receptáculos de tomas múltiples y en el lugar en que sale del aparato. 10. Utilice solo conexiones y accesorios suministrados por el fabricante. 11. Desenchufe el aparato si se produce una tormenta eléctrica o si no lo va a utilizar durante periodos prolongados de tiempo. 12. Toda reparación debe ser realizada por personal cualificado. Lleve el dispositivo a reparar si presenta algún daño como, por ejemplo, si el cable de alimentación está dañado, si se han vertido líquidos o se han caído objetos sobre el dispositivo o si éste ha estado expuesto a la lluvia o humedad; si no funciona correctamente o se ha caído al suelo. Nota: S e ha comprobado que este equipo cumple los límites para dispositivos digitales de clase B, de acuerdo con el apartado 15 de las normas de la FCC. Estos límites están diseñados para ofrecer una protección razonable contra las interferencias perjudiciales en una instalación doméstica. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y se utiliza de acuerdo con las instrucciones suministradas, podría ocasionar interferencias perjudiciales para las comunicaciones por radio. No obstante, no se puede garantizar que no se vaya a producir este tipo de interferencias en una instalación en particular. Si este equipo ocasiona interferencias perjudiciales en la recepción de radio o televisión, lo que puede comprobarse encendiendo y apagando el equipo, se recomienda que intente corregir la interferencia mediante una de las siguientes acciones: • Reoriente o reubique la antena receptora. • Aumente la separación entre el equipo y el receptor. • Conecte el equipo a la toma de un circuito diferente del que está conectado el receptor. • Consulte con su distribuidor o con un técnico de radio y televisión. Los cambios o modificaciones no aprobados expresamente por Bose Corporation podrían anular la autorización que tiene el usuario para utilizar este equipo. El dispositivo cumple la parte 15 de las normas de la FCC y de exención de licencias RSS de Industry Canada. El funcionamiento está sujeto a las dos condiciones siguientes: (1) Este dispositivo no puede causar interferencias nocivas y (2) este dispositivo debe aceptar cualquier interferencia que reciba, incluidas las interferencias que puedan causar un funcionamiento no deseado. Este aparato de Clase B cumple la especificación canadiense ICES-003. CAN ICES-3 (B) /NMB-3 (B) Este dispositivo respeta los límites de exposición a la radiación de radiofrecuencia establecidos por la FCC y las normas de radiofrecuencia de Industry Canada para la población general. No debe ubicarse ni utilizarse junto a ninguna otra antena o transmisor. Elrangodetemperaturasdeesteproductovade0°Ca45°C. ste símbolo significa que el producto no debe desecharse como residuos domésticos y que debe llevarse a un centro de recogida adecuado para su reciclaje. La eliminación y el reciclado adecuados ayuda a proteger los recursos naturales, la salud de las personas y el medio ambiente. Para obtener más información sobre la eliminación y el reciclado de este producto, póngase en contacto con su ayuntamiento, servicio de recogida de residuos o el establecimiento donde compró este producto. Español - 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2014:06:25 14:59:14-04:00 Creator : Adobe InDesign CC (Windows) Modify Date : 2014:06:25 14:59:30-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2014:06:25 14:59:30-04:00 Creator Tool : Adobe InDesign CC (Windows) Format : application/pdf Document ID : uuid:a2e3607c-d338-4172-8271-1ac17f3265d6 Instance ID : uuid:8cbafbd3-bf8c-43d4-9c8d-95faecb5eec5 Producer : Adobe Acrobat Pro 11.0.0 Page Count : 35EXIF Metadata provided by EXIF.tools