Bose 420617 Speaker Cube User Manual CP instructions 8 5x11 front 00 1

Download:
Mirror Download [FCC.gov]
Document ID	2972697
Application ID	jQKcGoznwt7rUf3z6TV9RA==
Document Description	Inbox Docs_User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24kB (299992 bits)
Date Submitted	2016-04-27 00:00:00
Date Available	2016-10-25 00:00:00
Creation Date	2016-01-27 23:05:06
Producing Software	Mac OS X 10.10.5 Quartz PDFContext
Document Lastmod	2016-01-27 23:05:06
Document Title	CP instructions_8.5x11_front_00-1
Document Creator	Adobe Illustrator CS6 (Macintosh)

BOSEbuild™ Speaker Cube
Controls and connections
Bluetooth® button
Color slider
Selects color or speed for color modes.
Note: This slider is only active when the
BOSEbuild Sound App is not connected.
Press to announce connected devices.
Press and hold to pair a new device.
Bluetooth indicator light
Blinking blue: Ready to pair
Solid white: Connected
Power/mode button
Press to select color mode.
Press and hold to turn the speaker cube off.
Press once to turn it back on.
Note: This button is only active when the
BOSEbuild Sound App is not connected.
Power connector
Connect the included power supply here.
Aux connector
Connect a 3.5 mm stereo audio cable here.
Coil connector
Connect the yellow coil here.
CONTROL PANEL – FRONT
Expansion connector
For future accessories.
Speaker connector
Connect the speaker panel here.
CONTROL PANEL – BACK
BOSEbuild Speaker Cube
Using your speaker cube without the BOSEbuild Sound app
The BOSEbuild Sound app includes step-by-step instructions for pairing and assembling your
speaker cube, as well as activities and tools that help you get the most out of your BOSEbuild
speaker cube. In addition, some features are available without using the app. The following
instructions describe using your speaker cube without the app.
Connecting to AC power
To use your BOSEbuild Speaker Cube, you must connect it to AC power.
1. Plug the small, round end of the power supply cord into the POWER connector on the
Control Panel.
2. Connect the power supply to an AC power outlet.
Pairing a mobile device
When you first power on the speaker, it is ready to pair with your mobile device. The Bluetooth
indicator blinks blue, and the voice prompt says, “Ready to pair your BOSEbuild Speaker Cube.”
1. On your mobile device, make sure Bluetooth is on. (The Bluetooth menu is usually found in
the Settings menu.)
2. Select your BOSEbuild Speaker Cube from your mobile device’s Bluetooth list.
The Bluetooth indicator glows solid white, and the voice prompt says, “Connected to
.”
Playing music
Once your mobile device is connected, start a music app on the device to play music. You can
use the playback and volume controls on your device to control the music.
Changing the speaker’s color
You can use the Power/Mode button and Color Slider to change the color of your speaker.
Note: This feature is only available when the BOSEbuild Sound app is not connected to the
speaker.
Press the Power/Mode button to switch between color modes. Use the slider to adjust the
appearance of each mode. Color modes appear in the following order:
1. Color Picker: The speaker glows a solid color. Use the slider to adjust the color.
2. Rainbow: The speaker scrolls through a rainbow of different colors. Use the slider to adjust
the speed.
3. Dancing Colors: The speaker lights up in response to music. Use the slider to adjust the
colors.
4. Color Off: The speaker’s RGB LEDs are off. Other features continue to operate as normal.
Turning voice prompts off/on
The BOSEbuild Speaker Cube features voice prompts to guide you through the pairing and
connecting processes. Voice prompts also announce the name of the currently connected
device(s).
If you prefer not to hear voice prompts, press and hold the Power/Mode button for 10 seconds.
You will hear confirmation that voice prompts are off. Repeat to turn voice prompts back on.
Note: This feature is only available when the BOSEbuild Sound app is not connected to the
speaker.
Using your speaker cube with multiple devices
Your BOSEbuild speaker cube can remember up to eight paired devices and can be actively
connected to two devices at a time. If you pair a ninth device, the least recently used device will
be deleted from the speaker’s memory.
Pairing another device
1. With the speaker cube powered on, press and hold the Bluetooth button ( )until the
Bluetooth indicator light blinks blue and the voice prompt says, “Ready to pair another
device.”
2. On your mobile device, make sure Bluetooth is on. (The Bluetooth menu is usually found in
the Settings menu.)
3. Select your BOSEbuild Speaker Cube from your mobile device’s Bluetooth list.
The Bluetooth indicator glows solid white, and the voice prompt says, “Connected to
.”
Managing multiple connections
When powered on, the speaker will automatically try to connect to the two most recently
connected devices.
When two devices are actively connected, you can play music from either device. To switch
between connected devices, pause the first device and play music from the second.
Scrolling through other paired devices
To play music from a paired device that is not currently connected:
1. Press the Bluetooth button ( ) to hear which device(s) are currently connected.
2. Press the Bluetooth button again within three seconds to connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on.
Clearing the speaker memory
To clear the speaker’s memory of all paired devices:
1. Press and hold the Bluetooth button ( ) for ten seconds, until you hear “Bluetooth device
list cleared.”
2. Delete the BOSEbuild Speaker Cube from your mobile device’s Bluetooth list.
All Bluetooth devices are cleared and the speaker is ready to pair.
Connecting an AUX device
You can use your speaker with any device that features headphone or audio output, such as a
portable digital music player. This feature requires using a stereo audio cable with a 3.5 mm
plug on each end to connect the audio output of your device to the AUX input of the speaker.
This type of cable is available at electronics stores.
To connect an AUX device:
1. Connect the speaker to AC power.
2. Connect the audio cable to the AUX connector on the speaker and to the headphone or
audio output connector on the device.
3. Use the connected device’s audio controls to adjust the volume level.
Note: When an audio cable is connected to the speaker’s AUX connector, the speaker
automatically switches to the AUX source. To switch back to the Bluetooth source, unplug the
audio cable.
Tips on placing the speaker
The sound quality of your speaker can vary depending on where the speaker is placed in a
room. Keep the following guidelines in mind when placing your speaker.
• The speaker’s Bluetooth range is XX feet (xx m). If you move the device too far away from the
speaker, sound quality will be affected and the device may disconnect from the speaker.
• For optimal performance, the speaker cube should be tightly sealed with no visible gaps or
openings, and the front of the speaker should face the listener.
• For best bass response, the back of the speaker should be placed near a wall, but not directly
against a wall. Bass response decreases as the speaker is moved away from a wall.
• Do not place the speaker in small areas that are enclosed on all sides except the front, as this
will adversely affect sound quality.
Factory reset
To restore your speaker cube to factory default settings:
1.
2.
3.
4.
Unplug the speaker.
With the speaker unplugged and unpowered, press and hold the Power/Mode button.
While holding the Power/Mode button, connect the speaker to AC power.
Continue holding the Power/Mode button for ten seconds, until the lights flash green.
The system resets, the Bluetooth indicator light blinks blue, and you hear, “Ready to pair.”
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.
©2016 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.
Bose Corporation, The Mountain,
Framingham, MA 10701-9168 USA
rev00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
XMP Toolkit                     : XMP Core 5.4.0
Modify Date                     : 2016:01:27 18:00:33-05:00
Create Date                     : 2016:01:27 18:00:33-05:00
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14799 bytes, use -b option to extract)
Thumbnail Width                 : 256
Thumbnail Height                : 176
Metadata Date                   : 2016:01:27 18:00:33-05:00
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Derived From Rendition Class    : proof:pdf
Derived From Document ID        : xmp.did:AB7F574E63216811822A8B67C96CB567
Derived From Instance ID        : uuid:f3bfe091-350d-7847-837e-fe37e3ef0150
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Instance ID                     : uuid:197cdf85-77e4-ac44-bc05-971e9e0d0ffd
History Software Agent          : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
History When                    : 2016:01:21 12:45:31-05:00, 2016:01:27 18:00:30-05:00
History Instance ID             : xmp.iid:0280117407206811822A8B67C96CB567, xmp.iid:AC7F574E63216811822A8B67C96CB567
History Action                  : saved, saved
Document ID                     : xmp.did:AC7F574E63216811822A8B67C96CB567
Rendition Class                 : proof:pdf
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
N Pages                         : 1
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Black   : 0.003099
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Type    : PROCESS
Has Visible Transparency        : False
Plate Names                     : Cyan, Magenta, Yellow, Black
Max Page Size W                 : 5.500000
Max Page Size H                 : 8.500000
Max Page Size Unit              : Inches
Has Visible Overprint           : False
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font File Name                  : Bose Gothic Regular.otf, Bose Gothic Medium.otf, Bose Gothic Bold.otf, MyriadPro-Regular.otf
Font Name                       : BoseGothic-Reg, BoseGothic-Med, BoseGothic-Bold, MyriadPro-Regular
Font Family                     : Bose Gothic, Bose Gothic, Bose Gothic, Myriad Pro
Font Version                    : Version 2.002, Version 2.002, Version 2.002, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Face                       : Regular, Medium, Bold, Regular
Font Composite                  : False, False, False, False
Format                          : application/pdf
Title                           : CP instructions_8.5x11_front_00-1
Startup Profile                 : Print
Producer                        : Adobe PDF library 10.01
Page Count                      : 4
PDF Version                     : 1.4
Creator                         : Adobe Illustrator CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools