Bose BT2L Bluetooth Headset User Manual Bluetooth Headset cover 17L

Bose Corporation Bluetooth Headset Bluetooth Headset cover 17L

Contents

Manual.pdf

BOSE® BLUETOOTH® HEADSET SERIES 2 |   |   | ©2011 Bose Corporation, The Mountain,Framingham, MA 01701-9168 USAAM347801 Rev.00BOSE® BLUETOOTH® HEADSET SERIES 2Bluetooth Headset cover_17L.fm  Page 1  Monday, May 16, 2011  2:35 PM
2EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Safety InformationPlease read this guidePlease take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your product properly and enjoy its advanced features. Please save this owner’s guide for future reference.The lightning flash with arrowhead symbol, within an equilateral triangle, alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in this owner’s guide.WARNINGS: • Contains small parts, which may be a choking hazard. Not suitable for children under age 3.• To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.• Do not expose this apparatus to dripping or splashing and do not place objects filled with liquids on or near the apparatus. As with any electronic product, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.• Do not place naked flame sources, such as lighted candles, on or near the apparatus. • This product is intended to be used only with the power supply provided. • Where the mains plug is used as the disconnect device, such disconnect device shall remain readily operable.•  Do not disassemble, heat above 100º C (212º F), or incinerate.• Do not use your headset while it is connected to the charger. • Do not use the headset at high volume for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels.©2011 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.GauguinOG.book  Page 2  Monday, May 16, 2011  1:36 PM
3English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11CAUTIONS: • Make no modification to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance and may void the warranty.• Operate this product within the tempera-ture range of -4°F to 113°F (-20°C to 45°C) only. Damage caused by use out-side of that range may not be covered by the warranty.• Check and follow local laws regarding use of a mobile phone and headset/headphones while operating any vehicle or using equipment that requires your full attention. If you use the headset/headphones while engaging in any such activity, be sure to focus on safety. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and other applicable Directives. The complete Declaration of Conformity can be found at www.Bose.com/compliance.Important Safety Information1. Read these instructions – for all components  before using this product.2. Keep these instructions – for future reference.3. Heed all warnings – on the product and in the owner’s guide.4. Follow all instructions.5. Do not use this apparatus near water or moisture – Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present.6. Clean only as directed by Bose Corporation. Unplug this product from the wall outlet before cleaning.7. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.GauguinOG.book  Page 3  Monday, May 16, 2011  1:36 PM
4EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 148. Protect the USB cord from being walked on or pinched, particularly at the power supply end and the point where it exits from the apparatus.9. Only use attachments/accessories specified by the manufacturer.10. Unplug this apparatus during light-ning storms or when unused for long periods of time – to prevent damage to this product.11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way: such as USB cord or power supply is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped – Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Bose Customer Service to be referred to an authorized service center near you.12. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles.13. Do not let objects or liquids enter the product – as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.14. Use proper power sources – Plug the product into a proper power source, as described in the operating instructions or as marked on the product.GauguinOG.book  Page 4  Monday, May 16, 2011  1:36 PM
5English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antenna or transmitter.In the United States:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.In Canada:This product complies with the Canadian ICES-003 Class B specification.Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. AttributionThe Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.GauguinOG.book  Page 5  Monday, May 16, 2011  1:36 PM
6EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Other agency markingsFCC ID: A94BT2R FCC ID: A94BT2LIC: 3232A-BT2RIC: 3232A-BT2LEngineered in the United StatesMade in ChinaMeets IDA RequirementsXXNames and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and ElementsPart NameLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent (CR(VI))Polybrominated Biphenyl (PBB)Polybrominated diphenylether (PBDE)PCBsX0 0 0 0 0Metal partsX0 0 0 0 0Plastic parts00 0 0 0 0SpeakersX0 0 0 0 0CablesX0 0 0 0 0O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.GauguinOG.book  Page 6  Monday, May 16, 2011  1:36 PM
English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 117Using the headset  8Thank you  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Functions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Charging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Initial pairing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Fitting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Wearing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Recognizing the lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Basic call actions and audio tones  . . . . . . . . . . . . . . . . . . . . 17Multi-point pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Connection priority for multiple paired phones . . . . . . . . . . . 20Multi-point call actions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Reference 21Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Customer service   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Technical information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29GauguinOG.book  Page 7  Monday, May 16, 2011  1:36 PM
8EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Using the headsetThank youWe appreciate your choice of the Bose® Bluetooth® headset  Series 2, which lets you hear and be heard, even as noise levels around you change.FeaturesSmall size, advanced fit, and simple controls.Volume + and – buttonsCall button Battery indicator Bluetooth indicator Power on/offStayHear™ tip(medium) USB connectorGauguinOG.book  Page 8  Monday, May 16, 2011  1:36 PM
9English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11FunctionsMultipoint pairingMaintain two active phone connections at once.Adaptive audio adjustmentHear what is being said, even as noise levels around you change, with automatic volume adjustment.A2DP audio streamingListen to podcasts, audio books, turn-by-turn directions, or other audio sources streamed directly from your mobile device. Automatically connects when an audio source is played.GauguinOG.book  Page 9  Monday, May 16, 2011  1:36 PM
10EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Included with headset:USB cablePower supply(where needed) Power supply adapters(where needed)Additional StayHear™ tips (small and large) Carry caseGauguinOG.book  Page 10  Monday, May 16, 2011  1:36 PM
11English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11ChargingAlthough the battery is partially charged at the factory, it is important to fully charge the battery before first use. Allow up to 3 hours for a full charge.1. Plug the small end of the USB cable into the headset. 2. Plug the large end of the cable into the power supply or a powered USB connector on your computer.3. Battery indicator light will blink yellow while charging and turn green when charging is complete.Note: The headset will not operate while charging.Note: Before charging, be sure the headset is at room temperature, between 41°F (5°C) and 104°F (40°C). GauguinOG.book  Page 11  Monday, May 16, 2011  1:36 PM
12EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Attaching adapters (if needed):1. Extend the power supply prongs. 2. If needed, snap on the adapter for your region (2a). To remove an adapter, press back on the release and lift the adapter up and off (2b). 3. Plug the power supply into an AC (mains) wall outlet.EuropeUK12a 2bGauguinOG.book  Page 12  Monday, May 16, 2011  1:36 PM
13English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Initial pairing 1. Ensure the mobile phone is on and Bluetooth® is enabled. Turn on the headset by sliding the power switch to the On (green) position.The Bluetooth indicator slowly flashes blue to indicate the headset is discoverable.2. Locate the Bluetooth device list on the mobile phone and select Bose BT2.3. If prompted for a passkey, enter 0000. The Bluetooth indicator flashes, then turns solid blue to indicate a successful connection.Additional pairing (up to 6 phones):Press and hold Call for 5 seconds to make the headset discoverable.Then repeat steps 2 to 4 above.Note: If you have difficulty pairing, see “Troubleshooting”, beginning on page 21. Bluetooth light and symbolBose BT2Bluetooth device listGauguinOG.book  Page 13  Monday, May 16, 2011  1:36 PM
14EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Fitting The soft StayHear™ tip allows the headset to rest comfortably in your ear. Choose the tip that is the right size for your ear. To change the tip:1. Gently remove the tip from the ear-piece. Do not pull on the tip wing. 2. Ease the new tip over the base of the earpiece until it latches onto the nozzle hook.Wearing 1. Place the headset into your ear, pointing straight down. 2. Then twist the headset upwards so it points directly at your mouth.3. Press the tip wing under the ear ridge.SlotNozzle hookTip wing123GauguinOG.book  Page 14  Monday, May 16, 2011  1:36 PM
15English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Recognizing the lightsBattery Indicator Color Status while on:  Status while charging:Green 1.5 - 4.5 hours remaining talk time, or 175 hours remaining standby time.(Solid) Charging is complete.Yellow 10 minutes - 1.5 hours remaining talk time, or 45 hours remaining standby time.(Flashing) Charging is ongoing.Red (Flashing) About 10 minutes remaining talk time, or about 7 hours remaining standby time.(Solid)Charging error.Room temperature or product may be too warm or too cold.GauguinOG.book  Page 15  Monday, May 16, 2011  1:36 PM
16EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Bluetooth® Indicator Color Indicates:Blue (slow flash) The headset is discoverable for pairing.Blue (quick flash) The headset is attempting to connect to a mobile phone or is receiving or making a call.Red (slow flash) The headset and a paired mobile phone are not connected. One of them is not turned on, or the two are more than 33 feet (10m) apart.Blue (solid) The headset is connected for calls.Purple (solid) The headset is connected for A2DP audio streaming.Note: Except when charging, indicators shut off after 10 seconds to conserve battery power.GauguinOG.book  Page 16  Monday, May 16, 2011  1:36 PM
17English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Basic call actions and audio tonesAction Headset control Audio toneAnswer a call Press Call once. Single beepMake a call Press Call once. Use voice commands or the phone keypad to select and dial. Single beepEnd a call Press Call once. Two notes (descending)Adjust the volume Press Volume + or - while on a call or streaming audio.One note per pressMute/Unmute acall Press Volume + and – at the same time. Short double beepSingle tone repeats every 30 seconds Transfer the audio to your mobile phonePress and hold Call (during a single phone call only) for 5 seconds or until transfer is complete.NoneLast number redial Press Call twice. Old-style phone ringingGauguinOG.book  Page 17  Monday, May 16, 2011  1:36 PM
18EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Reject an incoming call Press and hold Call for 3 seconds. Two notes(descending)Call waiting Press Call to answer  second call and place first call on hold.Single beepSwitch between two calls  Press Call twice.  Single beepBegin conferencing Press and hold Call for 3 seconds while two calls are active.Single beepLow battery None. Five-note warbleRepeats every 2minutesBluetooth® device connected None. Three quick notes(ascending)Bluetooth device disconnected None. Three quick notes(descending)Power on Slide Power switch to On position (green). Four notes(ascending)Power off Slide Power switch to Off position (red). Four notes(descending)GauguinOG.book  Page 18  Monday, May 16, 2011  1:36 PM
19English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Multi-point pairingTo maintain an active connection with two different mobile devices at the same time: 1. Disable the Bluetooth® connectivity on any phones previously paired to the headset. 2. Turn on the headset and the mobile phone.3. Press and hold Call and Volume + for 5 seconds.4. Complete the pairing procedure specific to your phone.5. Turn the headset off and then on again. 6. Repeat steps 2 - 5 for the second phone.Disabling multi-point pairing1. Press and hold Call and Volume – buttons for 10 seconds.2. Turn the headset off and then on again. 3. Re-pair the desired mobile phone.Note: Some phones require you to remove Bose BT2 from the Bluetooth device list before you can re-pair to that phone.GauguinOG.book  Page 19  Monday, May 16, 2011  1:36 PM
20EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Connection priority for multiple paired phonesThe last phone used for a call will have first priority for calls, voice dialing and redial.To make a call with the other connected phone, place the call manually. First priority then switches to this phone.To establish priority for any other paired phone, reconnect with that device by selecting Bose BT2 in the device list.Multi-point call actionsIn multi-point operation, call actions are the same as listed on page 17. To switch between active calls on two phones, pressCalltwice.GauguinOG.book  Page 20  Monday, May 16, 2011  1:36 PM
21English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11ReferenceTroubleshootingProblem What to doThe headset has short talk time. • Make sure both ends of the USB cable are firmly connected.• If you are using a power outlet:–Be sure the power supply is securely plugged in and the outlet is working. –Be sure to use the proper power supply adapter (if one is needed in your region).• If you are using your computer, be sure the computer is plugged in and the USB port is powered. Note: The battery indicator will blink yellow while charging and turn green when charge is com-plete.• Make sure the room temperature is between 41°F and 104°F (5°C and 40°C) and the product is at room temperature before charging begins. Note: The battery indicator glows a steady red if the room or product is too warm or cold.GauguinOG.book  Page 21  Monday, May 16, 2011  1:36 PM
22EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14The headset does not fit p ro p e r l y  o r   f e e l s        uncomfortable.• Make sure the headset is in the correct ear and the wing on the StayHear™ tip is flush beneath the ear ridge. (Refer to "Wearing" on page 14.)• Make sure the tip is firmly attached to the headset.• Try the large or small tip.The mobile phone and the headset do not pair.• Make sure both the headset and mobile phone are turned on and the Bluetooth® feature on your phone is activated. Refer to your phone instruction  manual for details.• Turn the headset off, then on again.• Press Call for at least 5 seconds to make the headset discoverable, then attempt to pair again.• Make sure the phone is within 33 feet (10 meters) of the headset.• Turn the phone power off, then on again and attempt to pair again.GauguinOG.book  Page 22  Monday, May 16, 2011  1:36 PM
23English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11The mobile phone and the headset do not connect.• Make sure both devices are turned on and Bluetooth®connectivity is enabled on the phone.• Turn the headset off, then on again. Make sure the mobile phone is within 33 feet (10 meters) of the headset.  • Check the Bluetooth device list on your phone to be sure Bose BT2 is selected. –If it is selected, delete it from the list (refer to your phone instruction manual for details). –If it is no longer listed, repeat “Additional pairing” on page 13.• Simultaneously hold Call and Volume – for 5 seconds to reset the memory, and pair the headset to the phone again.• Turn the phone power off, then on again.What you hear on the headset is not clear.• During a call, adjust the volume on your mobile phone or on the headset by pressing Volume +or – .• Check your mobile phone signal strength.• Make sure the mobile phone is within 33 feet (10 meters) of the headset.• Reposition the headset. Refer to “Fitting” on page 14.• Clean the wire mesh under the tip. See page 26.GauguinOG.book  Page 23  Monday, May 16, 2011  1:36 PM
24EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14What the other person hears is not clear.• Move the mobile phone closer to your headset.• Make sure the phone is not near other wireless equipment.• Reposition the headset. Refer to “Fitting” on page 14.• Check your mobile phone signal strength.• Turn the phone power off, then on again.A call disconnects unexpectedly.• Check the headset to make sure it is on and charged.• Make sure the mobile phone is within 33 feet (10 meters) of the headset.• Check the signal strength on your phone and make sure the battery is sufficiently charged.No audio from a streaming audio source or application.• Make sure the device supports A2DP audio streaming. (The Bluetooth® indicator will glow purple.)• Make sure the device’s Bluetooth volume is turned up and not muted.• Make sure the streaming audio source is on and playing.• Move the device closer to the headset.• Try another streaming audio application.• Turn the phone power off, then on again.GauguinOG.book  Page 24  Monday, May 16, 2011  1:36 PM
25English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Poor sound quality from a streaming audio source or application. • Move the device closer to the headset.• Move the device and headset away from any device that could cause interference, such as another Bluetooth® enabled device, cordless phones, a microwave oven, or a wireless computer network router.• Reduce the number of Bluetooth applications that are running on your device. (Running multi-ple applications may reduce the amount of inter-nal resources available to transmit audio. Closing all non-essential applications may improve audio quality. Disabling Wi-Fi functionality on the device may also improve audio quality.• Try another streaming audio application.• Turn the phone power off, then on again.GauguinOG.book  Page 25  Monday, May 16, 2011  1:36 PM
26EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Customer serviceFor additional help in solving problems, contact your Bose® dealer. Or for online support visit:• owners.Bose.com in the U.S.• global.Bose.com outside the U.S.To contact Bose by phone, refer to the address list on the inside back cover of this guide. MaintenanceBattery care:1. Be sure to turn off the headset when it is not in use.2. Before storing the headset for more than a few months, be sure the battery is fully charged. To clean the headset:Use a soft, dry cloth to wipe the surface carefully. Do not use liquids or sprays. To clean the tip: Gently peel the tip from the end of the earpiece. Wash the tip with mild soap and rinse. Dry with a soft cloth. Be sure the tip is completely dry before reattaching to the headset.To clean the wire mesh under the tip:Gently peel the tip from the end of the earpiece. Lightly brush the mesh screen with a soft, dry cloth. Avoid pressing on the mesh, which could push debris through the mesh and into the headset. GauguinOG.book  Page 26  Monday, May 16, 2011  1:36 PM
27English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Limited WarrantyYour Bose® Bluetooth® headset Series 2 is covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights.To obtain Limited Warranty serviceReturn the product, with proof of purchase from an authorized Bose dealer, as follows:1. Contact the Bose organization in your country/region (visit Global.Bose.com for contact information in your country/region) for specific return and shipping instructions.2. Label and ship the product, freight prepaid, to the address provided by the Bose organization in your country.3. Place any necessary Return Authorization Number prominently on the outside of the carton. Cartons not bearing a Return Authorization Number, where required, will be refused.Note: The serial number is located on the warranty card included in the carton.GauguinOG.book  Page 27  Monday, May 16, 2011  1:36 PM
28EnglishTab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14Technical informationWeight: 0.42 ounces (12 grams)Power supply rating:Input: 100 VAC to 240 VAC, 0.15AOutput: 5V, 1ATemperature ranges:Operate this product within the temperature range of -4°F to 113°F (-20°C to 45°C) only.Store this product within the temperature range of -4°F to 113°F   (-20°C to 45°C) only.Charge the battery where the temperature is between 41°F and 104°F (5°C and 40°C) only.Battery:Rechargeable, non-replaceable lithium-ion polymer.Charging time: 3 hours for full charge.Use with a fully charged battery: up to 4.5 hours of talk time or 175 hours of standby time. Talk time may vary with specific mobile phones.GauguinOG.book  Page 28  Monday, May 16, 2011  1:36 PM
29English Tab 6, 12Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11Bluetooth® QD ID: B018073Version 2.1 Enhance Data Rate (EDR) and Secure Simple Pairing (SSP).Profiles include Headset (HSP 1.1), Hands Free (HFP 1.5), and Advanced Audio Distribution Profile (A2DP 1.2). Accessories• To replace the supplied StayHear™ tips, carry case, power supply, power supply with adapters, or adapters only, visit global.Bose.com, or contact Bose® Customer Service. • To purchase an optional headset charger for your vehicle, contact your authorized Bose dealer or Bose Customer Service.To contact Bose by phone, refer to the address list on the inside back cover of this guide. GauguinOG.book  Page 29  Monday, May 16, 2011  1:36 PM
BOSE® BLUETOOTH® HEADSET SERIES 2 |   |   | ©2011 Bose Corporation, The Mountain,Framingham, MA 01701-9168 USAAM347801 Rev.00BOSE® BLUETOOTH® HEADSET SERIES 2Bluetooth Headset cover_17L.fm  Page 1  Monday, May 16, 2011  2:35 PM

Navigation menu