Bose Stereo System Wave Soundlink Adapter Users Manual
bose wave soundlink adapter to the manual e753ac9b-823c-40a2-9b4b-6715e8403ac7
2015-01-24
: Bose Bose-Bose-Stereo-System-Bose-Wave-Soundlink-Adapter-Users-Manual-232262 bose-bose-stereo-system-bose-wave-soundlink-adapter-users-manual-232262 bose pdf
Open the PDF directly: View PDF
Page Count: 24
- Safety Information
- The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.
- The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.
- The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owner’s guide.
- Bose link cable
- USB key antenna
- 3. Check to be sure the SoundLink® USB key power light turns on and begins to flash.
- 4. Wait for your computer to recognize the SoundLink® USB key. It may take up to 20 seconds the first time.
- 5. After the connection is made, you may need to set your computer’s audio output device. See page 12.
- Disconnecting the computer
- Reconnecting the computer
- Manually linking the SoundLink® adapter and USB key
- 1. Using the SoundLink® remote control, press the SoundLink/AUX button 1-2 times until SOUNDLINK appears on the front panel display.
- 2. Press and hold the Presets 5 button on the remote control until DISCOVERABLE is displayed and flashing on the Wave® system display.
- 3. With your computer turned on, lift the antenna on the SoundLink® USB key to the vertical position and plug the key into a USB port on your computer.
- USB key button
- 4. Press and hold the button on the USB key for more than 3 seconds until the light begins to flash.
- If you don’t hear audio from the Wave® system:
- Setting your computer’s audio output device
- Pairing a Bluetooth® device
- 1. Make SoundLink® Discoverable Using the Wave® SoundLink® remote control, press the SoundLink/AUX button until SOUNDLINK appears on the Wave® system display panel. Press and hold down the Presets 5 button for 5 seconds.
- 2. Select SoundLink® from the Device List Turn on your phone, tablet computer, or other device and locate its Bluetooth device list. Scroll through the device list and select “Bose SoundLink Audio”.
- 3. Enter Passcode If prompted for passcode, enter 0000. Some devices also ask you to accept the connection.
- 4. Complete Pairing The Wave® system emits a brief beep and SOUNDLINK appears on the display panel when the connection is ready for use.
- Using multiple Bluetooth devices
- Remote control functionality
- SoundLink/AUX
- Battery replacement
- Troubleshooting
- Upgrading your Wave® music system, as needed
- Customer service
- Limited warranty
- What you must do to obtain Limited Warranty Service:
- 1. Contact the Bose organization in your country/region (visit Global.Bose.com for Bose contact information in your country/region) for specific return and shipping instructions;
- 2. Label and ship the product, freight prepaid, to the address provided by the Bose organization in your country; and
- 3. Place any necessary return authorization number prominently on the outside of the carton. Cartons not bearing a return authorization number, where required, will be refused.
- What you must do to obtain Limited Warranty Service:
- Technical information
- If your kit includes an adapter power pack
- Product parts
- SoundLink® USB key for use with computer
- Adapter power pack
- 100-240V