Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 887753 |
| Application ID | NJlTdeY5SQtYMHVzcHwRFg== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.66kB (608218 bits) |
| Date Submitted | 2008-01-10 00:00:00 |
| Date Available | 2008-01-10 00:00:00 |
| Creation Date | 2007-09-11 15:36:26 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2007-09-12 10:58:55 |
| Document Title | Kiai OG.book |
| Document Creator | FrameMaker 7.0 |
| Document Author: | bs7979 |
QUIETCOMFORT 3 BLUETOOTH® ® COMMUNICATIONS KIT Owner’s Guide Svenska Nederlands Italiano Français Español Deutsch Dansk English SAFETY Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your product properly and enjoy its advanced features. Please save this owner’s guide for future reference. WARNING: Contains small parts, which may be a choking hazard. Not suitable for children under age 3. CAUTIONS • This device is intended for use only with the Bose® QuietComfort® 3 Acoustic Noise Cancelling® headphones. • Make no modification to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance. • Operate this product within the temperature range of 32°F to 104°F (0°C to 40°C) only. • Store this product within the temperature range of -40°F to 158°F (-40°C to 70°C) only. • Long-term exposure to loud sound may cause hearing damage. It is best to avoid extreme volume when using the headphones, especially for extended periods. • Do not use this device when operating a motor vehicle on a public road, or where the inability to hear outside sounds may present a danger to you or others. • Do not use this device for communications while operating aircraft. • Sounds that you rely on as reminders or warnings may have an unfamiliar character when you are using the headphones. Be aware of how these sounds vary in character, so you can recognize them as needed. English Dansk Deutsch Español Français Italiano Nederlands Svenska In the United States: In Canada: This device complies with part 15 of the FCC Rules. This product complies with the Canadian ICES-003 Class B specification. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This device conforms to the RTTE Directive 99/5/EC. The complete Declaration of Conformity can be found at: www.Bose.com/static/compliance/Index.html Svenska Nederlands Italiano Français Español Deutsch Dansk English INTRODUCTION Congratulations on your choice Thank you for selecting the Bose® QuietComfort® 3 Bluetooth® communications kit. This kit is designed exclusively for use with Bose QC® 3 Acoustic Noise Cancelling® headphones. Together with the headphones, the kit provides: • Wireless connection to your Bluetooth®enabled cell phone, so you can take a call when the phone is tucked away in a pocket, purse, or briefcase. • Automatic switch-over to the phone when you press the call button while listening to a portable music player or other device connected to the kit. • Noise reduction and audio precision for added clarity of conversations and music. • Narrow-field microphone that lets you hear your speaking voice naturally and keep conversations private. • Headphone battery power that keeps the kit running without charging it separately. Svenska Nederlands Italiano Français Español Deutsch Dansk English CONTENTS INTRODUCTION ................................... 4 MAINTAINING .................................... 15 Congratulations on your choice ................... 4 Contents of the kit ........................................ 6 Details ..................................................... 6 Packing up the kit .......................................15 Troubleshooting ..........................................16 Customer Service .......................................18 Cleaning the kit ...........................................18 Limited Warranty .........................................18 BLUETOOTH® PAIRING ......................... 7 MORE ABOUT BLUETOOTH® ............... 19 UNPACKING ........................................ 6 Making the wireless connection ................... 7 Getting the kit into pairing mode .............. 8 Setting your cell phone .......................... 10 Glossary of terms ........................................19 USING THE KIT ................................. 11 Wearing and adjusting parts ...................... 11 Positioning the microphone ................... 11 Talking on the phone .................................. 12 Making calls ........................................... 12 Taking calls ............................................ 13 Ending calls ............................................ 13 Adding a portable music device ................. 13 Playing music ......................................... 14 Removing the microphone ..................... 14 Svenska Nederlands Italiano Français Español Deutsch Dansk English UNPACKING Contents of the kit • Boom microphone (A) • Control module with cable and earcup connector (B) • Audio connection cable (C) • Storage tray (D) Details The image on the right identifies accessory kit buttons and parts. The removable boom microphone fits into the connection cable. The clothing clip attaches the module cable to a pocket or other clothing edge. Clothing clip Indicator light + Volume button – Volume button Call button O/I power Boom microphone switch Audio connection jack Control module Earcup connector English Dansk Deutsch Español Français Italiano Nederlands BLUETOOTH® Making the wireless connection Before using the kit with your cell phone, you must follow the Bluetooth® pairing procedure that puts the two devices in touch. This two-part procedure takes just a few minutes and must be completed just once. Svenska PAIRING It includes: • Getting the communications kit ready for pairing with the cell phone. • Setting your cell phone so it recognizes and connects to the kit. It is important to complete the two parts in the proper order. IMPORTANT Be sure to review the Bluetooth® pairing procedure for your specific cell phone as described in the user’s manual that came with it. Procedures vary slightly, according to the brand and model of cell phone you use. Svenska Nederlands Italiano Français Español Deutsch Dansk English BLUETOOTH® PAIRING Getting the kit into pairing mode Before using your cell phone, you need to set the communications kit to be recognized by the phone. 1. Attach the boom microphone to the kit earcup connector (A). 2. Insert the earcup connector plug firmly into the jack on the left earcup (B) until it snaps into place. Make sure the small tab on the side of the connector slides into the grooved rim around the earcup cushion. This keeps it positioned securely ( .). Left earcup Earcup connector Tab Boom microphone Earcup cushion Grooved rim CAUTION: Be sure the small tab does not pinch the earcup cushion material (X) next to the grooved rim. Tab Tab English Dansk Deutsch Español Français Italiano Nederlands Svenska BLUETOOTH® PAIRING 3. Turn on the headphones (B). 4. Turn on the control module by sliding the O/| power switch up to I (C). Wait until a small blue light on the front of the control module begins to pulse. 5. Press the + Volume and Call buttons at the same time (D). The blue light on the front of the module changes from pulsing to solid blue. This indicates that the module is in pairing mode. To complete pairing, follow the remaining steps on page 10. Right earcup Solid blue light + Volume button Pulsing blue light O/I power switch Call button Svenska Nederlands Italiano Français Español Deutsch Dansk English BLUETOOTH® PAIRING Setting your cell phone Refer to your cell phone owner’s guide for details on how to complete this procedure. 1. Turn on your cell phone. 2. Locate the Bluetooth® option under Tools or Settings. 3. Choose to add a new device to your phone and watch as items begin to appear on the cell phone screen. This list identifies various Bluetooth® devices that are available nearby. 4. Wait for Bose QC3 Comm Kit to appear, then select it. 5. Enter the numbers 0000 when your phone requests a Passkey or PIN code. 10 6. Select yes to confirm this connection, as needed (if your phone requires it). On successful completion: • Confirmation appears on the cell phone screen. • The blue light on the kit control module blinks quickly and then resumes pulsing slowly. • A beep sounds in the headphones (noticeable only if you are wearing them). If none of these occur, you may want to repeat both parts of the procedure carefully. Refer to page 8 to begin again. For quicker connection between the two devices, set your cell phone to identify the QuietComfort® 3 Bluetooth® communications kit as a trusted device. Refer to the owner’s guide that came with your phone for instructions. English Dansk Deutsch Español Français Italiano Nederlands USING Wearing and adjusting parts With the headphones and kit connected, you can add the boom microphone for use with your cell phone. Use the clothing clip on the control module cable to fasten the cable to your clothing, for convenience. For guidelines on putting on the headphones and adjusting them for comfort, refer to the owner’s guide provided with the headphones. Positioning the microphone The boom microphone adjusts easily. • Place your fingers on the boom and move the microphone slightly in any direction. Svenska THE KIT • Position the microphone just below your bottom lip and as close to your mouth as is comfortable. This provides the most natural sound. Correctly adjusting and positioning Just below your lower lip Close to your mouth Incorrectly positioned 11 Svenska Nederlands Italiano Français Español Deutsch Dansk English USING THE KIT Talking on the phone Making calls Turn on the headphones, the kit control module, and your cell phone. Make sure the Bluetooth® connection between the kit and your cell phone is active. If it is, you can hear sounds from the cell phone in the headphones. If you move around, be sure to stay within 33 feet (10 m) of your cell phone. Use your cell phone to enter or select a phone number and send the call as you normally do. The phone links automatically to your headphones, enabling you to hear the call connect. If it does not connect, your cell phone may be out of range to make this call. When out of range, some phones emit a beep that can be heard in the headphones. • To redial, press the + Volume button. • To adjust the volume, press the control module + Volume button or – Volume button. Or use the volume control on your phone. O/I power switch Note: Using voice commands to make a call requires a phone that supports this option and is set up to recognize your voice. Refer to your cell phone user’s manual to confirm this. 12 English Dansk Deutsch Español Français Italiano Nederlands Svenska USING THE KIT Taking calls Call When you hear your phone button ring in the headphones, press the Call button on the control module to answer. Volume • To ignore a call, press the buttons – Volume button. Ending calls Press the Call button as you do to answer a call. Adding a portable music device The kit includes an audio cable for use with a portable music device. A music-enabled cell phone is one kind of device you can use this way. 1. Insert the small plug on the audio cable into the connector on the lower edge of the control module. 2. Plug the large end of the cable into the headphone connecAudio tor on your connection portable music jack device. Headphone jack Note: The QuietComfort® 3 Bluetooth® communications kit does not support the A2DP profile for receiving music from Bluetooth® devices. 13 Svenska Nederlands Italiano Français Español Deutsch Dansk English USING THE KIT Playing music Removing the microphone When you listen to music (or in-flight entertainment on a plane) and are not making or receiving calls, turn off the module. 1. Turn on your portable music device. 2. Set the volume on the music device to a moderate level. 3. Use controls on that device for: • making any further volume adjustments. • searching for or selecting tracks of music. Earcup connector You can detach the microphone when you are not using it for calls. Pull gently on the plug end of the boom. This releases it from the earcup connector. You can use the Boom supplied storage tray microphone for storing the removed microphone as described on page 15. Turn off the module to save headphone battery power when not using your Bluetooth® cell phone. Note: If you leave the module turned on so you can make or receive calls, it automatically mutes the music when you press the Call button. 14 English Dansk Deutsch Español Français Italiano Nederlands Svenska MAINTAINING Packing up the kit The storage tray provided with your QuietComfort® Bluetooth® communications kit is designed to replace the existing tray in your headphone carry case. To use this new tray: 1. Remove the original tray and insert this new one in its place. 2. Repack the headphone accessories that were stored in the original tray. 3. Detach the removable boom microphone from the kit and place it horizontally in the new tray. 4. Insert the kit module and cable into the spaces designed for them. 5. Position the headphones, with kit earcup connector still attached, in the case as usual. Headphone accessories Kit module and cable Removable boom microphone Kit earcup connector 15 Svenska Nederlands Italiano Français Español Deutsch Dansk English MAINTAINING Troubleshooting Problem What to do My communication • Make sure the earcup connector plug is fully inserted in the jack on the left earcup. It kit won’t come on. clicks into place when inserted properly. • Make sure the QC®3 headphones are turned on and the l/O power switch on the communications kit module is in the on (I) position. • Charge the QC®3 headphones battery. No link to my Bluetooth® cell phone. 16 • • • • Make sure the communications kit control module is turned on. Make sure your cell phone has the Bluetooth® mode turned on. Make sure your cell phone is within range of the communications kit (33 ft/10 m). Repeat the Bluetooth® pairing procedure. See the instructions that begin on page 6. English Dansk Deutsch Español Français Italiano Nederlands Svenska MAINTAINING My cell phone does not ring in the headphones. • Make sure all batteries are charged, the headphones, kit control module, and cell phone are turned on and the cell phone is set to ring (not vibrate). • Make sure your cell phone is set to the Bluetooth® mode. • Make sure your Bluetooth® pairing was completed successfully. If not, repeat the steps outlined under “Bluetooth Pairing” on page 7. • Move the cell phone to within 33 ft (10 m) of the communications kit module. People cannot hear me on the phone. • Make sure the removable boom microphone is firmly attached and the unit is snapped securely into the jack on the left earcup. • Make sure the microphone is within a finger’s width of your mouth. There is popping or static when I use my phone. • Move the cell phone closer to the communications kit control module for a better signal between the two. My cell phone music doesn’t play in the headphones. • The Bluetooth® link to your phone does not support A2DP music protocol. • Attach the audio connection cable to the audio output on your phone and to the audio connection jack on the communications kit module. This allows you to hear the music play and to receive and make calls as described on page 12. 17 Svenska Nederlands Italiano Français Español Deutsch Dansk English MAINTAINING I hear sound in one • Make sure the plug on the communications kit earcup connector is fully and firmly earcup only. inserted in the jack on the left earcup. Refer to Step 2 on page 8. • Make sure your music device is connected securely to the communications kit control module. Refer to “Adding a portable music device” on page 13. Sound in my • For music, use the volume controls on your music device only. headphones is too • For calls, set the volume to mid range on your cell phone. Use the + Volume and loud or too soft. – Volume buttons on the communications kit module to make slight adjustments. Customer Service Limited warranty For questions about the QuietComfort® 3 Bluetooth® communications kit, contact your local Bose® dealer. To contact Bose directly, see the contact list included in the carton. Your Quiet Comfort 3 Bluetooth® communications kit is covered by a 1-year transferable limited warranty. To register online, visit our website: www.Bose.com. Failure to register will not affect your limited warranty rights. Cleaning the kit Simply wipe the outside surface of the control module and boom with a dry cloth, as needed. 18 English Dansk Deutsch Español Français Italiano MORE Glossary of terms You may want to know more about the technology that makes your wireless communications possible. Here are some terms and explanations that can help. Bluetooth® device A device that is capable of short-range, cable-free wireless communications, following Bluetooth® communication standards. Bluetooth® technology is frequently used in cell phones, laptop computers, and PDAs. Note: Standard Bluetooth® protocol does not include A2DP capabilities for cell phone music transmission. Nederlands ABOUT Svenska BLUETOOTH® Pairing The process of identifying one Bluetooth® device for another. This enables the two devices to exchange a link that is activated before or at the time of actual connection. Paired devices Bluetooth® devices that have exchanged a link, which enables them to communicate wirelessly. Passkey or PIN key Any combination of letters or numbers that authenticate the connection between two Bluetooth® devices. 19 ©2007 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 306384 AM Rev.00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2007:09:11 15:36:26Z Modify Date : 2007:09:12 10:58:55-04:00 Tagged PDF : Yes Page Mode : UseNone Producer : Acrobat Distiller 8.1.0 (Windows) Creation Date : 2007:09:11 15:36:26Z Mod Date : 2007:09:12 10:58:55-04:00 Author : bs7979 Creator Tool : FrameMaker 7.0 Metadata Date : 2007:09:12 10:58:55-04:00 Document ID : uuid:ecca80a5-1d5b-480e-91f9-0fa2bada3eab Instance ID : uuid:4b69d868-fb38-4678-b848-2100f769f00e Format : application/pdf Title : Kiai OG.book Creator : bs7979 Page Count : 20EXIF Metadata provided by EXIF.tools