Boss Audio Systems Br 1600Cd Users Manual 1600CD_Ver.2_e
Roland Corporation BR-1600CD Owner's Manual br-1600cd_v2_ad Roland Corporation - BR-1600CD - Owner's Manual
BR-1600CD to the manual 6e7c2eae-f316-4c1f-bfa2-4db8818adf7e
Roland Corporation BR-1600CD Owner's Manual br-1600cd_v2_ad Roland Corporation - BR-1600CD - Owner's Manual
2015-02-03
: Boss-Audio-Systems Boss-Audio-Systems-Br-1600Cd-Users-Manual-475940 boss-audio-systems-br-1600cd-users-manual-475940 boss-audio-systems pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Additional Functions Additional functions in Version 2 ■ Effect Algorithms Inherited from the BOSS GT-6B ■ Import Songs from the BR-1180CD/ 1200CD The BC-1600CD incorporates algorithms—virtually unaltered—from the world-famous BOSS GT-6B bass multieffects processor. Now bassists also can enjoy using COSM Amp Modeling, COSM Overdrive/Distortion, and other high-quality modeling effects. You can now convert BR-1180CD/1200CD song data and import it to the BR-1600CD. Without having additional operation, you can import BR-1180CD/1200CD songs as BR1600CD songs simply and easily via CD-R/CD-RW discs to which the BR-1180CD/1200CD songs have been backed up (users already working with Version 1.10 should note that BR1180CD song convert function is also featured in Version 1.10). ■ More Powerful Vocal Tool Box Functions Pitch correction enables you to specify any desired time and corrective pitch within the song. And with Harmony Sequence, you can also specify the time and pitch for each of the harmony voices. ■ Export All Tracks in Waveform Files at One Time Via USB ■ Simplified Mastering Adjustments with the VALUE Dials Whereas exporting WAV or AIFF files via USB used to require exportation of individual tracks one at a time, with Version 2, you can now export all tracks together in a single pass. You can adjust the amount and sonic quality of the Mastering Tool Kit, as well as the naturalness of the effect, simply and easily with the VALUE dials. Other enhancements ■ MIDI Slave Sync Function ■ Check the Drum Sounds Easily You can use the BR-1600CD as a slave device, with playback time and speed synchronized to the MIDI Time Code (MTC) received at MIDI IN. About to use the track buttons to check a drum sound? Now you can play drum sounds simply by switching to the drum Edit screen. ■ SMF import can be done up to 999 measures When you import SMF data via CD-R/RW discs or USB, it is possible to import up to 999 measures. Contents Algorithms From the GT-6B (COSM OD BASS AMP)................................................................ 2 Making Detailed Settings for Pitch Correction (Correction Event Map).................................. 3 Making More Detailed Backing Chorus Settings (Harmony Event Map)................................. 5 Adjusting the Mastering Tool Kit Effects and Volume.............................................................. 7 Importing BR-1180CD/1200CD Songs Via CD-R/RW Discs (BR-1180CD/1200CD Song Convert)......... 8 Synchronizing the BR-1600CD to Another BR Series Device or MIDI Sequencer (MTC Slave)............ 9 Saving Recorded Data for All Tracks at One Time in WAV/AIFF Format .............................. 11 Copyright © 2005 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. Algorithms From the GT-6B (COSM OD BASS AMP) Version 2 now includes effects algorithms from the BOSS GT6B multi-effects processor that can be used for bass guitars. These algorithms are referred to by the title “COSM OVERDRIVE BASS AMP (COSM OD BASS AMP).” There are 20 new patches using these algorithms (P101–P120) now included as presets. Pick a patch to check out these effects. COSM OD BASS AMP incorporates the BOSS GT-6B’s amp modeling and COSM overdrive and distortion effects virtually unaltered to provide you with a variety of distortion and bass amp sounds. Patch List No. Patch Name Algorithm P101 Mtown LoDown COSM OD BASS AMP P102 Liverpool COSM OD BASS AMP P103 B-M Exprosed COSM OD BASS AMP The following effects blocks include the COSM OD BASS AMP algorithms. P104 Geddy's COSM OD BASS AMP P105 No.1 Player COSM OD BASS AMP fig.09-080 P106 Bare Bass360 COSM OD BASS AMP P107 Brite Isle COSM OD BASS AMP P108 Roto Drive COSM OD BASS AMP P109 CloseSession COSM OD BASS AMP P110 Fieldy's COSM OD BASS AMP P111 Deep&Throaty COSM OD BASS AMP P112 Grunge GT-6B COSM OD BASS AMP P113 Anthony FLNG COSM OD BASS AMP P114 Pitch Double COSM OD BASS AMP P115 PseudoDefret COSM OD BASS AMP P116 Graham Slap COSM OD BASS AMP P117 Lowdown COSM OD BASS AMP P118 EnhancedSlap COSM OD BASS AMP P119 Demon Child COSM OD BASS AMP P120 Funkadelic COSM OD BASS AMP COSM Comp/Limiter COSM Overdrive/Distortion COSM PreAmp&Speaker Equalizer/Wah - 3 Band Equalizer - Wah Noise Suppressor Foot Volume FX - Octave - Enhancer - Slow Gear - Defretter - Ring Modulator - Phaser - Flanger - Pitch Shifter - 2x2 Chorus - Short Delay - Vibrato - Humanizer - Tremolo - Pan Chorus Delay You can rearrange the connection sequence of these effects however you like. The settings are changed in the same way as with other effects algorithms. For more details, refer to p. 77 in the Owner’s Manual. 2 Making Detailed Settings for Pitch Correction (Correction Event Map) In Version 2, you can now specify the precise time and level of pitch correction used when editing the pitch with the Pitch Correction function. This allows you to select and edit just those portions of the vocals you want to correct. When detailed corrections are made to the pitch, the correction start point and the corrected pitch are specified together. This information is referred to collectively as the “Correction Event Map.” To edit pitches with the Edit Event Map, use the following procedure. Initially, only one correction event, “AUTO,” is input at the beginning of the correction event map. AUTO: After the specified point in the song, all pitches are corrected in semitone increments. (This functions the same way as Pitch Correction in versions prior to Version 1.10.) 4. Press [F1] (NEW). A new correction event is inserted. fig.03-3671d 1. Selecting the patch to which pitch correction is to be applied. 2. Press [F2] (EDIT) in the Vocal Tool Box pitch selection screen. 5. Move the cursor to “TIME” and specify the time at which you want the correction to start with the TIME/ VALUE dial. The Pitch Correction Edit screen appears. fig.03-362d fig.03-368d 3. Press [F3] (MAP EDIT). The Correction Event Map screen appears. * You cannot change the time of the correction event at the start of the song. fig.03-366d 6. Move the cursor to “NOTE” and specify the pitch you want to correct with the TIME/VALUE dial. fig.03-3681d In the Correction Event Map screen, you can input the time at which you want the pitch correction to start as well as the pitch. Taken together, this timing and pitch data is referred to as a “correction event.” NOTE: fig.03-367 Pitch Correction start point OFF Next event start point No correction is made after the specified point in the song. The song is played using the original pitch. Correction pitch AUTO Vocal pitch After the specified point in the song, all pitches are corrected in semitone increments. Time You can make corrections freely at the desired points in the song by arranging correction events in the sequence they occur. (This functions the same way as Pitch Correction in versions prior to Version 1.10.) C, C#, –A#, B The performance after the specified point in the song is adjusted to the specified pitch. The sequence of correction events with the information they contain is called a “correction event map.” 3 Making Detailed Settings for Pitch Correction (Correction Event Map) 7. Move the cursor to “SMOOTH” and specify the correction speed. fig.03-3683d * You cannot delete the correction event at the beginning of the song. If this correction event is unneeded, rather than deleting it, just set the function to “OFF.” 13. Repeat Steps 4–12 as needed to specify the edited range. 14. To save the correction events you have input, save the song (p. 72 in Owner’s Manual). SMOOTH -100 – +100 The value set here is added to the value of the “Smooth” patch parameter (p. 118 in Owner’s Manual). When set to “0,” the correction speed is the same as that set in the patch’s “Smooth” setting. As the value increases in the negative direction, the pitch correction is executed more rapidly than it would be according to the value set in the patch, whereas the correction is applied more smoothly as the selected value is increased in the positive direction. * Set the value so that the sum of the values is in a range from 0 to 100. The pitch correction produces no effect when the value is set below 0 or over 100. 8. Press [F1] (NEW). Another new correction event is inserted. 9. Move the cursor to “TIME” and specify the time at which you want the correction to end with the TIME/ VALUE dial. fig.03-369d 10. Move the cursor to “NOTE” and specify “OFF.” fig.03-3682d 11. Have the Recorder play the song from the beginning. When a correction event specifies the note name in NOTE, the correction is first applied at the point in the song specified in Step 5, with the correction ending at the point specified in Step 9. 12. To delete any unnecessary correction events, move the cursor to the event and press [F4] (DELETE). The correction event is deleted. 4 You can only save a Correction Event Map to a single song. Even if you switch the patch with the pitch correction, the Correction Event Map remains unchanged. Making More Detailed Backing Chorus Settings (Harmony Event Map) In Version 2, when applying backing chorus, you can now specify precisely the time and pitches in the harmony and the backing chorus ON/OFF status. This allows you, for example, to freely add harmonies to solo vocals. In adding detailed backing chorus, the time at which the backing chorus starts and stops and the pitches used in the harmonies are specified together. This timing and pitch data is referred to as the “Harmony Event Map.” fig.03-400 Pitch Voice 1 pitch Voice 2 pitch Voice 3 pitch Time Start point for the backing chorus Use the following procedure to edit pitches using the Harmony Event Map. 1. Selecting the patch to which you want to apply the harmony sequence. 2. Press [F2] (EDIT) in the Vocal Tool Box pitch selection screen. The Harmony Sequence Edit screen appears. Start point for the next backing chorus You can freely add backing chorus wherever you want in the song by arranging harmony events in the preferred sequence. The sequence of harmony events with the information they contain is called a “harmony event map.” Initially, only one harmony event, “AUTO,” is input at the beginning of the harmony event map. fig.04-362d AUTO: After the specified point in the song, the backing chorus is automatically added in accordance with the rhythm arrangement’s chord map. 3. Press [F3] (=> PRM.). The Harmony Sequence Parameter screen appears. fig.04-374ad 4. Press [F2] (MAP EDIT). The Harmony Event Map screen appears. fig.04-374d 5. Press [F1] (NEW). A new harmony event is inserted. fig.04-3741d 6. Move the cursor to “TIME” and specify the time at which you want the backing chorus to start with the TIME/VALUE dial. fig.04-375d In the Harmony Event Map screen, you can input the time at which you want addition of the backing chorus to start as well as the pitch for each of the three voices comprising the harmony. Taken together, this timing and pitch data is referred to as a “harmony event.” * You cannot change the time of the harmony event at the start of the song. 7. Move the cursor to“VOICE1” and specify the pitch for the first voice with the TIME/VALUE dial. fig.04-3751d 5 Making More Detailed Backing Chorus Settings (Harmony Event Map) VOICE1: OFF The first voice is not played after the specified point in the song. AUTO After the specified point in the song, the voice is played in accordance with the rhythm arrangement’s chord map. (This functions the same way as Harmony Sequence in versions prior to Version 1.10.) * You cannot delete the harmony event at the beginning of the song. If this harmony event is unneeded, rather than deleting it, just set the function to “OFF.” 15. Repeat Steps 5–14 as needed to specify the backing chorus. 16. To save the harmony events you have input, save the song (p. 72 in Owner’s Manual). C, C#, –A#, B After the specified point in the song, the voice is played at the specified pitch. In case of “+” is added to “AUTO” or note, it sounds one octave up. In case of “-” is added to “AUTO” or note, it sounds one octave down. 8. Specify the settings for “VOICE2” and “VOICE3” in the same manner. 9. Press [F1] (NEW). Another new harmony event is inserted. 10. Move the cursor to “TIME” and specify the time at which you want the backing chorus to end with the TIME/VALUE dial. fig.04-3761d 11. Move the cursor to “VOICE1” and specify “OFF.” fig.04-3762d 12. Specify “OFF” for “VOICE2” and “VOICE3” in the same manner. 13. Have the Recorder play the song from the beginning. When the harmony event specifies the note name in VOICE (1–3), the backing chorus is first added at the point in the song specified in Step 5, then ends at the point specified in Step 10. 14. To delete any unnecessary harmony events, move the cursor to the event and press [F4] (DELETE). The harmony event is deleted. 6 You can only save a Harmony Event Map to a single song. Even if you switch the patch with the harmony sequence, the Harmony Event Map remains unchanged. Adjusting the Mastering Tool Kit Effects and Volume In Version 2, not only can you select Mastering Tool Kit patches, but you can now also make adjustments to the patches with VALUE knobs 1–3. Setting this to the center position maintains the patch’s original effect. * The VALUE 1–3 Knob settings are not saved to the patches, but rather are applied to all patches. 1. Select a Mastering Tool Kit patch. 2. Press PAGE SCROLL button [ ]. The VALUE knob (1–3) icons appears. fig.03-901d The sound may be distorted depending on your setting. Use your ears as well when adjusting the VALUE 1–3 knobs to achieve the sound you want while confirming there is no distortion. 3. Adjust the VALUE 1–3 knobs while playing back Track 15/16 to get the sound you want. VALUE 1 Knob: DYNAMICS This adjusts the difference between the high and low volume levels during the performance. The range in volume decreases as the knob is turned to the right (clockwise). Although this is convenient for achieving an overall volume level, it results in a loss of some of the natural dynamics of music. The range in volume increases as the knob is turned to the left (counterclockwise). Although this results in a loss of the overall volume level, it provides a natural dynamic range that is close to that of the actual performance. Setting this to the center position maintains the patch’s original effect. VALUE 2 Knob: TONE Turning this knob to the right boosts the low-frequency and high-frequency ranges. Turning this knob to the left produces a more subdued tone whereby the low-frequency and high-frequency ranges are not emphasized. Setting this to the center position maintains the patch’s original effect. VALUE 3 Knob: NATURAL Turning this knob to the right causes the Mastering Tool Kit to be applied more slowly for a more natural effect. Since sudden peaks in volume are played back as is, this condition makes it more difficult to achieve a good overall volume level. When the knob is turned to the left, the Mastering Tool Kit is applied more rapidly in response to sudden volume peaks. However, this negatively impacts the naturalness of the sound. 7 Importing BR-1180CD/1200CD Songs Via CD-R/RW Discs (BR-1180CD/1200CD Song Convert) With Version 2, without having additional operation, you can convert songs created with the BR-1180CD/1200CD and import them to the BR-1600CD. • Users already working with Version 1.10 should note that BR-1180CD song convert function is already featured in Version 1.10). • Importing BR-1180CD/1200CD songs requires that the songs first be backed up to a CD-R/RW disc using the “Song Backup” function. Note that songs cannot be imported from discs made with the “HDD Backup” function. 1. Insert a CD-R/RW disc containing backup BR-1180CD/ 1200CD’s songs into the BR-1600CD’s CD-R/RW drive. The drive’s access indicator will begin to flash. Wait until this indicator stops flashing and turns off before proceeding. 5. Move the cursor to the song you want to convert and press [F1] (SELECT). The song will selected for convert. A number of songs can be selected in this way for convert, and an asterisk (*) will be displayed for each selected song. To cancel this selection, press [F1] once again. If you would like to convert all of the songs on the CDR/RW disc in a single operation, press [F2] (ALL). All songs will be selected for convert. To cancel this selection, press [F2] once again. This deselects all songs. 6. When you have selected all of the songs you want to convert, press [F4] (CONVERT or GO). The BR-1600CD will start the convert process. When the message “Complete!” appears, it indicates that the convert has been completed successfully. 2. Press CD-R/RW [DATA SAVE/LOAD]. The Data CD screen will appear. fig.41-05d 3. Press [F2] (RECOVER) or move the cursor to RECOVER, and then press [ENTER/YES]. The Recover screen will appear. fig.41-16d Note that if you are using the BR-1180 (without the CD-R/RW drive), you will not be able to back up the songs to CD-R/RW discs, and thus cannot import these songs. The following data can be imported from the BR-1180CD. ■ Each track • Recorded data • PAN/EQ • CHORUS/REVERB SEND LEVEL 4. Press [F1] (SONG) or move the cursor to SONG, and then press [ENTER/YES]. A list of the CD-R/RW disc’s backup songs will be displayed. fig.41-17d BR-1180CD’s Songs ■ The following data of the song bank • Effect patches (except for patches using the EG MULTI 1 algorithm) • Rhythm arrangements (arrangements using Preset/User patterns are left blank) • Rhythm patterns • Loop Phrases ■ Markers BR-1200CD’s Songs Scenes and their links are deleted. * Data that was recorded on the BR-1180CD in MT1/MT2/ LV1/LV2 modes will all be converted to LIN. 8 Synchronizing the BR-1600CD to Another BR Series Device or MIDI Sequencer (MTC Slave) With Version 2, the BR-1600CD can receive synchronization messages known as “MIDI Time Code” (MTC), which allows you to synchronize its playback timing with an external device. In such setups, another BR Series unit (BR-8/532/ 864/900CD/1180/1180CD/1200CD) or a MIDI sequencer serves as the master while the BR-1600CD acts as a slave device. 1. As shown in the figure, use a MIDI cable to connect the master device to the BR-1600CD (slave). ● Slave: Go through the same process used with the master device, but set “MTC Type” so it matches the master device setting, and “MTC Slave” to “ON.” ■ When using a BR Series device as the master: ● Master: Set “Sync Generator” to “MTC.” ● Slave (BR-1600CD): 1) Press [UTILITY]. The Utility Menu screen will appear. 2) Move the cursor to the SYNC icon and press [ENTER/YES]. Alternatively, you can press [F2] (SYNC) if the SYNC icon is currently displayed. The synchronization setting (SYNC) screen will appear. 3) Move the cursor to “MTC Type” and set it using the TIME/VALUE dial so it matches the master device setting. 4) Move the cursor to “MTC Slave” and select “ON” using the TIME/VALUE dial. fig.50-07 Master Slave BR-1600CD BR-1600CD MIDI OUT MIDI IN Another BR Series MIDI OUT MIDI IN ■ When using a MIDI sequencer as the master: ● Master: After referring to the owner’s manual for the MIDI sequencer, set the sequencer to transmit MTC. MIDI Sequencer MIDI OUT MIDI IN * You cannot synchronize the devices if the MIDI sequencer does not support MTC. ● Slave (BR-1600CD): 2. Set the master device and the BR-1600CD (slave) as follows. ■ When BR-1600CDs are used as both master and slave: 1) 2) 1) 3) Move the cursor to “MTC Type” and set it using the TIME/VALUE dial so it matches the master device setting. 4) Move the cursor to “MTC Slave” and select “ON” using the TIME/VALUE dial. Press [UTILITY]. The Utility Menu screen will appear. 2) Move the cursor to the SYNC icon and press [ENTER/YES]. Alternatively, you can press [F2] (SYNC) if the SYNC icon is currently displayed. The synchronization setting (SYNC) screen will appear. 3) Move the cursor to “Sync Generator” and select “MTC” using the TIME/VALUE dial. Move the cursor to the SYNC icon and press [ENTER/YES]. Alternatively, you can press [F2] (SYNC) if the SYNC icon is currently displayed. The synchronization setting (SYNC) screen will appear. * In this case, the signal from the master BR-1600CD’s DIGITAL OUT connector can be input to the slave BR1600CD’s DIGITAL OUT connector. ● Master: Press [UTILITY]. The Utility Menu screen will appear. MTC Slave OFF: No MTC signals will be received. ON: Upon receipt of MTC, MTC type will be recognized automatically and sync. 9 Synchronizing the BR-1600CD to Another BR Series Device or MIDI Sequencer 3. Press [EXIT/NO] several times to return to the top screen. 4. If you want to record using the slave device, press [REC] on the slave BR-1600CD at this point so the button flashes red (recording standby mode). Do not press [PLAY] at this time. Additionally, you do not need to press [REC] if you only want to play back the data. 5. Start playback with the master device (press [PLAY] on the BR Series device). By receiving MTC from Master unit and recognizing automatically, and synchronized playback also starts on the slave BR-1600CD. If the slave was put in recording standby in Step 4, then recording also begins. It may take several seconds immediately after playback starts for synchronization to stabilize. The pitches of sounds recorded or played back during this interval may be unstable. Leave about one measure of blank space before the beginning of songs or other such points at which you want synchronization to start. 6. To stop playback or recording, stop the MIDI sequencer. The slave BR-1600CD stops simultaneously. 10 Saving Recorded Data for All Tracks at One Time in WAV/AIFF Format When saving recorded track data to a computer via USB in WAV or AIFF format, Version 2 now enables you to save all of the tracks in one operation. If using Windows: At Step 5 of the procedure on p. 248 in the Owner’s Manual, rotate the TIME/VALUE dial to the right to select *-* rather than a track number. The rest of the procedure is identical to that described on p. 248–249. If using Macintosh: At Step 5 of the procedure on p. 250 in the Owner’s Manual, rotate the TIME/VALUE dial to the right to select *-* rather than a track number. The rest of the procedure is identical to that described on p. 250–251. 11 03904790 ’05-3-1N
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:03:22 11:44:28+09:00 Create Date : 1998:07:07 12:59:42Z Page Count : 12 Creation Date : 1998:07:07 12:59:42Z Mod Date : 2005:03:22 11:44:28+09:00 Producer : Acrobat Distiller 5.0.5 for Macintosh Author : BOSS Corporation Metadata Date : 2005:03:22 11:44:28+09:00 Creator : BOSS Corporation Title : BR-1600CD_Ver.2_e Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools