Boston Life Labs BS24 Wireless Body Scale with Bluetooth User Manual
Boston Life Labs LLC. Wireless Body Scale with Bluetooth Users Manual
Users Manual
Bluetooth Body Fat Scale
USER NOTES
一： Battery
1 ， Use number seven battery for 3pcs (without battery in itself)
2 ， Please note the positive pole and negative pole when installation.
二： Operation
step1 ： Please put the scale on the solid floor when weighting. In order to avoid the
accuracy, please don ’ t put the scale on the soft or unlit floor, such as carpet.
Step2 ： Put the mound and selector in the right place (kg or pound)
step3 ： When using the Bluetooth, set the switch in “ ON ” And when not use it,
set the switch in “ OFF ” , which can save the power.
step4 ： Knock the scale gently; wait for a moment after Power on, use when it shows
0.0KG.
三 .Auto power off
The product will be off automatically when it shows a stable weight 15 seconds later
(about 3 minutes when open the Bluetooth)
四： Suggestive sign
Over load indication ： When the LCD shows “ err ” , it over load.
Low battery ： When the LCD shows “ Lo ” , it is low battery, and please changes
the battery.
五： The suggestion about using and service
1 ， Please keep the surface dry , avoid slipping.
2 ， Please keep static state when weighting.
3 ， Please don ’ t knock, hit and slip the product.
4 ， The product is the precise instrument, please handle with care.
5 ， Prevent from the water, and put it in dry place.
6 ， Please display horizontally, and don ’ t stick up.
7 ， Please check the battery if you can not power on.
8 ， If an error occurred or can ’ t power off when weighting, please take the
batteries down, and reloading for use after 5 seconds.
9 ， The product is designed for body weighting, so it can not be used in
commercial and industrial weighting.
FCC ID: YTK-BS24
IMPORTANT REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any
interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.