Bowe Bell Plus Howell S006830 Users Manual Truper Operator’s

2015-02-02

• Trademark Acknowledgments
• Table of Contents
  • Federal Communications Commission Requirements
• Thank You
  • About Trûper
  • About This Manual
• Specifications
  • Scanner Unit
• Advanced Features
  • Consumable Parts and Accessories List
  • Computer System Requirements
  • Component Identification
  • Minimum Space Requirements
    • Top View
    • Front View
• Safety Precautions for the Operating Environment
  • The Scanner Unit
  • Power Source
  • Handling the CD-ROM
• Installing the Scanner
  • Quick Installation Checklist
  • Unpacking the Scanner
  • Attaching the Feeder Tray
  • Initial Setup and Installation
    • Connecting the Scanner
    • Installing the Windows Scanner Driver
  • Trûper Software Installation
    • Installing the Software
    • View Manuals
    • Contents of the Installation Resource CD-ROM
• Operating the Scanner
  • Turning on the Scanner
  • LED Status Indicator
  • Document Preparation
    • General Guidelines
    • Guidelines for Using the ADF
    • Types of Documents to Avoid in the ADF
  • Using the Trûper ADF
  • Clearing Paper Jams in the ADF
    • Removing Paper Jams from the Document Feeder
    • Removing Paper Jams from the Exit Path
  • STOP/START Button Operation
  • Feed Modes with the ADF
    • Manual Feed
    • Wait for Start to Feed
    • Automatic Start to Feed
    • Scanner Manual Feed Setting
  • Feeding Speed
  • Detect Double Feed
  • Changing the Background Color
    • Changing the Background Color Reference Plates
• Operator Maintenance
  • Cleaning the Outside of the Scanner
  • Cleaning Inside the Scanner
    • Roller Cleaning Paper
    • Cleaning the Paper Feed Roller, Separation Roller and Retard Roller
    • Cleaning the Drive Rollers and Free Rollers in the ADF
    • Cleaning the Drive Rollers, Free Rollers and Exit Rollers in the Exit Door
    • Cleaning the Background Color Reference Plates and ADF Glass
    • Cleaning the Paper Sensor, Waiting Sensors and Double Feed Detector
    • Cleaning the Starting, Skew and Ending Sensors
• Replacing Consumables
  • Replacing the Paper Feed Roller Module
  • Replacing the Retard Roller Module
• Trûper User Utility
  • Starting the User Utility
  • Functions and Settings
    • User Utility Main Dialog Window
    • Restoring Shading to the Default
    • Scanner Counter
    • Help
    • Select Scanner(X)
    • Save Info
    • Close
    • Check Version Information
• Troubleshooting
  • User Utility Error Codes
  • Troubleshooting Scanner Operations
• Repacking Instructions
• Glossary
• Appendix 1-Front Page, Pre-Scan Imprinter Installation
  • Safety Precautions
  • Component Identification
  • Installing the Imprinter Unit
  • Ink Cartridge Installation and Printing Position
    • Safety Precautions
    • Installing the Ink Cartridge
    • Adjusting the Printing Position
  • Cleaning the Ink Cartridge
    • Cleaning the Print Head with the User Utility
    • Cleaning the Print Head Manually
  • Removing the Ink Cartridge
  • Ink Cartridge Specifications
    • Imprinter (Endorser)
• Appendix 2-Multicolor Dropout (MCD) and Single Color Dropout
  • Single Color Dropout
  • Multicolor Dropout (MCD)
  • How to Determine RGB Value
• Appendix 3-Shading Adjustment
  • About Shading Adjustment
    • What Is the Purpose of Shading Adjustment?
    • When Is Shading Adjustment Required?
  • Shading Adjustment Procedure
• Appendix 4-Adding Memory
  • Installing the DIMM Module
    • Removing the Interface Board
    • Installing a DIMM Module on the Interface Board
    • Re-installing the Interface Board
• Appendix 5 - Wire Frame Accessory
  • Attaching the Wire Frame Accessory
• Index
• Limited Use License Agreement