Braun Irt 1020 Users Manual GB/6005 Inst. Therm.

irt1020 8f164778-31bb-c9d4-a943-89bde9e89889 Braun Thermometer IRT 1020 User Guide |

: Braun Braun-Irt-1020-Users-Manual-409657 braun-irt-1020-users-manual-409657 braun pdf

Open the PDF directly: View PDF .
Page Count: 10

ThermoScan

Instant Thermometer

IRT 1020

Type 6005

Home Model

English

Use Instructions

Guarantee

Service Centres

Important

safeguards

The Braun ThermoScan Instant Thermometer

is a sophisticated electronic instrument that

has been carefully engineered for both

accuracy and safety. The shape of the

thermometer prevents it from being inserted

far enough into the ear canal to damage the

eardrum. However, basic safety precautions

should always be observed, especially when

using the thermometer on or near children.

Please read all

instructions

carefully before

using this product

To use this instrument safely:

•This product is designed to measure human

body temperature by detecting heat from

the eardrum and surrounding tissue. Do

not use the instrument for any other

purpose. Do not use any other type of

thermometer in the ear.

•Close supervision is necessary when using

this thermometer on, near or by children or

disabled persons.

• Keep lens filters out of reach of children.

To ensure long life and accurate operation of

this precision instrument:

• This thermometer must only be used with

genuine Braun ThermoScan Lens Filters.

(LF 40).

•Do not use this thermometer without a new

lens filter attached. After each use, discard

it and replace with a new one. (See Care

and Cleaning, page 17).

•If the thermometer is ever accidentally used

without a lens filter attached, clean the lens.

(See Care and Cleaning, page 17).

• Never submerge the Braun ThermoScan

Instant Thermometer in water or any other

liquid.

• When not in use, place the storage cover

over the thermometer with a lens filter

attached to protect it from damage and dirt.

• Store unit and lens filters in a dry location

free from dust and contamination where the

temperature remains fairly constant and

within the range of 16°C to 40°C (61°F to

104°F).

• Store lens filters away from direct sunlight

and fluorescent lighting.

• Do not drop, mishandle, or expose to

temperature or humidity extremes

[outside the range of –20°C to 50°C (–4°F

to 122°F), 15 - 95 % RH non-condensing.]

Do not use if the thermometer malfunctions

or has been damaged in any manner.

• There are no user-serviceable or

replaceable parts exept the 9 volt battery

and lens filters. Refer to page 74 for service

information.

•This product is intended for household

use only. Use of this thermometer is not

intended as a substitute for consultation

with your physician.

For best results, use a 9 volt alkaline battery.

• Do not dispose of empty batteries in

household waste. Take them to special

local collection sites.

2 3

Thank you for

purchasing the

Braun ThermoScan

Instant Thermometer

Unlike other thermometers that must be held

in place for several minutes, the Braun

ThermoScan Instant Thermometer takes a

temperature in just one second. It takes a

“picture“ of the infrared heat given off by the

ear drum and surrounding tissue, calculates,

and displays an ear temperature on the digital

readout.

But way take a temperature at the ear?

Because the eardrum is close to and shares

blood vessels with the hypothalamus, the

temperature control centre of the brain.

Therefore, temperatures taken from the ear

reflect the body’s “core“, or internal

temperature. (Tis is the temperature of the

heart, brain and internal blood supply.) The

ear is also a protected cavity, so, unlike oral

temperatures, the accuracy of ear

temperatures in unaffected by eating,

drinking, smoking and breathing through the

mouth. The ear is a dry cavity so cross-

contamination through mucous membrane

contact, a problem with oral and rectal sites,

cannot occur. Also, the risk of bowel

perforation, a concern when taking rectal

temperatures on infants or children, is

eliminated.

The Braun ThermoScan Instant Thermometer

has been clinically proven to be safe and

accurate. To ensure the best results, please

take the time to read this manual completely

and keep it handy for future reference.

4 5

IRT 1020 product specifications

Product type: 6005

Technical Characteristics:

Patient temperature range 34 - 42.2°C (93,2-108°F)

Surrounding room temperature

for operational range 116 - 40°C (61-104°F)

Display resolution 0.1°C or °F

Temperature scales (user selectable) °C or °F

Operating relative humidity (max) 80 %

Long term storage ranges

Temperature –20 to 50 °C (– 4 to 122°F)

Humidity (max) 95 % noncondensing

Display Mode: Ear ( )

Power source: One 9 volt alkaline battery

(6 LR 61, MN 1604 9 V, alkaline)

Weight (without batteries): 188 g (6.6 oz)

Accuracy characteristics:*

Applicable patient ages All ages

Laboratory error (max)

Patient temperature range Error °C Error °F

37.0°C to 39.0°C (8.0°F to 102.0°F) ±0.1 ±0.2

35.8°C to <37.0°C (96.4°F to <98.0°F) ±0.2 ±0.3

>39.0°C to 41.0°C (>102.0°F to 106.0°F)

<35.8°C or >41.0°C (<96.4°F or >106.0°F) ±0.3 ±0.5

* Meets American Society for Testing and Materials (ASTM) Accuracy

Standards E1112-86 over normal operating range.

Components and

features

Product includes the following components:

• Braun ThermoScan Instant Thermometer

• Lens Filters (20, plus one on thermometer)

• Storage Cover (See Figure 5)

• Use Instructions

• Labels

Not included, but required:

• One 9 volt alkaline battery

(6 LR 61, MN 1604 9V, alkaline).

Preparing the Braun

ThermoScan Instant

Thermometer for use

To remove the thermometer from the storage

cover, slide it forward in the cover (Figure 2a,

arrow 1), then lift up (Figure 2a, arrow 2).

Open the battery door by pressing in at the

arrow and sliding the door down toward the

base of the instrument (Figure 2b)

.

The thermometer is shipped with the Celsius/

Fahrenheit switch set to Celsius. If you wish to

have temperatures displayed in Fahrenheit

(°F), slide the switch as shown (Figure 3a).

The Braun ThermoScan Instant Thermometer

uses a 9 volt battery. To install it, snap the

positive and negative terminals of the battery

onto the appropriate receptacles on the

connector (Figure 3b). Place the battery inside

the compartment and slide the battery door

back into place.

Note: Minimum battery life is one year or

300 temperatures when an alkaline battery

is used.

6 7

Figure 1

Figure 2

Figure 3

1 Activation Button

2 Lens

3 Lens Filter

4 LCD Liquid Crystal Display

5 On-button

6 Battery Door

7 Attach new lens filter

Lens filters are located inside the thermometer

storage cover. Remove the box from the cover

and open the box of lens filters by completely

removing top of box (Figure 4a). You may

return the box to the cover for convenient

storage (Figure 4b).

The thermometer is shipped with a lens filter in

place. To install a new lens filter, remove the

one in place, then take a new one from the box

and holding it by its edges, slide it onto the

lens until it is snug and snaps in place.

Caution: Do not touch the tip of the lens or

lens filter when installing.

With a new lens filter in place, attach the

storage cover to the thermometer to protect

the lens from damage and dirt. Place the lens

end of the thermometer into the storage cover

first matching the indent in front of the

activation button with the corresponding tab

inside the cover (Figure 5a), then snap the

opposite ends together (Figure 5b). To

remove the unit from the storage cover,

reverse this procedure.

Note: Always use and store the thermo-

meter with a new lens filter attached.

Apply label to storage cover as indicated

(Figure 5c).

How ear

temperatures

compare to

temperatures

taken at more

traditional sites

The Braun ThermoScan Instant Thermometer

displays ear temperature readings, which

frequently cannot be compared directly to

temperatures taken at the same time at

another site. This is because the temperature

measured at the ear with the Braun

ThermoScan Thermometer more closely

reflects any rapid changes occurring with the

internal (core) body temperature.

Temperatures taken in the ear canal tend to

reflect changes in internal body temperature

sooner than oral, rectal or axillary (armpit)

because the eardrum shares blood supply

with the temperature control center in the

brain. Oral temperatures are influenced by

eating, drinking, smoking, rapid breathing,

thermometer placement or the inability of the

person to close their mouth completely.

Axillary temperatures have not been found to

be accurate indicators of core temperatures

except in newborns.

Temperature changes are also seen sooner

when measured in the ear canal. Studies

show that rectal temperatures “lag“ behind

internal (core) body temperatures, especially

during periods of rapid warming and cooling,

as when you have a fever. This is due to the

poor blood supply in this area, insulating

effects of stool, and the presence of heat

producing microorganisms located there.

8 9

Figure 4

Figure 5

Body temperature

measurement

Normal body temperature is a “range“, not a

single point, as temperature varies from

person to person. A person’s temperature can

rise with excessive clothing, hot weather or

accelerated activity (such as crying or

exercise). In order to observe these naturally

occurring variations and determine the normal

temperature range for each member of your

family, practice taking temperatures on

yourself and healthy family members at

different times of the day to determine their

“baseline“ temperature. The normal range for

ear temperatures taken with the Braun

ThermoScan Instant Thermometer is from

35.8°C (96.4°F) to 38.0°C (100.4°F) for all

ages.

Normal body temperature also varies with

age. We have the highest temperatures when

we are younger. About our eleventh year,

body temperature begins to decrease

gradually. The elderly population has the

lowest body temperatures. For your reference,

the following chart shows normal ear

temperature ranges by ages groups for the

Braun ThermoScan Instant Thermometer:

When consulting your physician about fever,

remember to communicate that this is an ear

temperature, referrring to the appropriate ear

temperature range in the chart above. Also,

note the individual’s “baseline“ temperature as

an additional reference point.

Normal Ear Temperature Range by Age

Years of Age Celsius Fahrenheit

0 - 2 36.4°C - 38.0°C 97.5°F - 100.4°F

3 -10 36.1°C - 37.8°C 97.0°F - 100.0°F

11 - 65 35.9°C - 37.6°C 96.6°F - 99.7°F

>65 35.8°C - 37.5°C 96.4°F - 99.5°F

How to use the

Braun ThermoScan

Instant Thermometer

1. Remove the thermometer from its storage

cover. If stored properly, a new lens filter will

already be in place. (See procedure on

page 7.)

Do not use thermometer without

lens filter attached.

2. Depress the on-button that is located

directly below the LCD (liquid crystal

display) to turn the power on. (See Figure 1)

•All segments on the LCD-display (Figure

6) will be shown for two seconds to

indicate a fully functional display.

• The display will indicate (not ready)

while the unit is completing self test, then,

within two seconds (ready) indicating

that the thermometer is ready to take a

temperature (Figure 7). If no temperature

is taken within two minutes, the ther-

mometer will automatically shut off.

3. Stabilise the head. In infants, this is best

achieved by laying them flat with the head

rotated so the ear is up.

4. Perform an ear tug and position the

thermometer. In order to take an accurate

temperature, the thermometer must be

positioned correctly in the ear. In addition,

an “ear canal straightening“ technique must

be used to straighten the natural bend of the

canal and ensure that the thermometer has

a clear view of the eardrum.

• If you are right handed, hold the

thermometer in the right hand and take

the temperature in the right ear. If you are

left handed, hold it in the left hand and

use the left ear. This will help ensure

proper placement.

• Perform an “ear tug“ by using your free

hand to grasp the outer edge of the top

half of the ear and follow the steps in the

chart below. To take your own temper-

ature, an ear tug is best achieved by

wrapping your free hand around the back

of your head and grasping your ear from

behind.

Continue pulling the ear until you are

finished taking the temperature.

10 11

Ready

Not ready

Ear

Change battery

Error

Figure 7

Figure 6

Ear tug and

positioning

technique

Children unter 1 year

• Ear Tug Gently but firmly pull ear straight

back (Figure 8a).

• Positioning Approach the ear from behind

the child. Place the lens at the opening of

the ear canal. Using a slight back and forth

rocking motion, gently insert the ther-

mometer, pointing the lens toward the

opposite eye. Gently insert the lens as far

as possible until the ear canal is fully sealed

off (Figure 8c).

Children 1 Year to Adult

• Ear Tug Gently but firmly pull ear up and

back (Figure 8b).

• Positioning Approach the ear from behind

the person. Place the lens at the opening of

the ear canal. Using a slight back and forth

rocking motion, gently insert the ther-

mometer, pointing the lens slightly in front of

the opposite eye. Insert the thermometer as

far as possible until the ear canal is fully

sealed off (Figure 8c).

5. After the thermometer is correctly

positioned, press the “Activation“ button

with the index finger and hold fully

depressed for one second.

NOTE: In the following situations, it is

recommended that you take three

temperatures in the same ear. If they

differ, use the highest reading.

(1) Infants in the first 90 days of life.

(2) Children under trhee years of age

who have a condition such as a

compromised immune system and for

whom the presence or absence of fever

is critical.

(3) When you are first learning to use the

ear thermometer until you are com-

fortable with the technique and are

obtaining consistent readings.

No more than three readings should be

taken consecutively in the same ear since

repeatedly inserting the thermometer into

the ear canal can lower the reading.

6. When the unit is removed from the ear, the

temperature will be shown on the display

(Figure 9) until another temperature is taken

or the unit powers down. The thermometer

is ready to take a new temperature when

(ready) appears on the screen along with

the last temperature reading (Figure 10). To

help ensure accuracy, you must change the

lens filter after each reading. Inspect the

lens whenever you replace a lens filter. Two

minutes after the final temperature reading,

the thermometer will automatically turn itself

of to conserve battery power.

7. Before storing the thermometer in its

storage cover, change the lens filter (see

page 17 “Care and Cleaning“) and check to

make sure the filter is intact with no visible

scratches or holes. If a lens filter is

damaged, dispose of it and replace it with a

new one. Additional lens filters (LF 40) are

available at most stores carrying Braun

ThermoScan Instant Thermometers, or

contact Braun for a store near you.

12 13

Figure 8

Figure 9

Figure 10

Temperature

taking hints

• It is important to use an ear tug, point the

thermometer lens toward the eardrum and

gently insert far enough into the ear canal to

obtain an accurate reading.

• When taking a temperature on another

person, it may be more difficult to

consistently position the thermometer in

their ear. If the person whose temperature

is to be taken is old enough, ask for

assistance in the positioning process.

• It is not uncommon for a person’s

temperature in the right ear to be slightly

different than in the left ear. When

monitoring temperature during illness, use

the same ear to maintain a constant frame

of reference.

•If a person has been sleeping on one ear for

an extended period of time, the temperature

of that ear may measure higher than

normal. Wait a few minutes before taking a

temperature to allow the ear to stabilise.

• The best temperature measurements are

taken when the ear is free of obstruction. If

you suspect an obstruction or excessive

earwax build up, contact your physician.

• The normal range for ear temperatures

taken with a Braun ThermoScan Instant

Thermometer is 35.8°C to 38°C (96.4°F to

100.4°F).

•To protect the instrument lens, always keep

a lens filter attached. If the thermometer is

accidentally used without a filter, gently

clean the lens and surrounding area (see

instructions on page 17). It is also a good

idea to inspect the lens whenever you

replace a lens filter.

• The thermometer is designed to take

accurate temperatures with a lens filter

in place. Temperatures taken without a

lens filter attached will not be accurate

and can damage the lens. Change the

lens filter after each use.

14 15

Troubleshooting

The Braun ThermoScan Instant Thermometer has been designed to

provide feedback to ensure proper usage and accurate temperature taking.

In many cases this means that instead of displaying a temperature that is

not meaningful, a message will be displayed that will help you take

corrective action. These messages are outlined below:

LCD-Display Situation

Solution

Err 1 Appears after on-button is

pushed if the temperature of

the Braun ThermoScan is

not within its operating

range. 16°C to 40°C (61°F to

104°F).

Move the thermometer to a

room within the 16°C to

40°C (61°F to 104°F)

operating range for 30

minutes and retake

temperature.

Err 2 appears after pushing the

activation button if

temperature measurement

is not within typical human

temperature range of 34°C-

42,2°C (93,2°F to 108°F).

Be sure a lens filter is

attached and the

thermometer is properly

inserted, fully sealing off

the ear canal. Take the

temperature again.

Err 3 Appears after the activation

button is pushed if it is not

held down for a full second.

Take the temperature

again by slowly depressing

the activation button and

holding it down for one full

second.

Err 4 Appears after activation

button is pushed if the

internal temperature of the

thermometer is changing to

rapidly.

Allow the thermometer to

remain for 30 minutes in

the room where the tem-

perature is being taken.

Err 000 The Braun ThermoScan

performs a self diagnostic

test on is circuitry after each

initial activation and when a

new battery is intalled. If any

faults are detected, „Err 000“

will be displayed.

Wait 2 minutes until the

thermometer switches

itself off automatically

(blanc LCD-display). Push

on-button and take

temperature again. If „Err

000“ is repeated, contact

Braun.

Care and cleaning

Lens Tip

• The lens tip is the most delicate part of the

thermometer. It is covered with a soft, thin

membrane which forms a surface that is

transparent to heat waves. To ensure

accuracy, it is very important to keep the

lens clean and intact, and to always keep a

clean, new lens filter attached. Fingerprints,

ear wax, dust and other soiling compounds

reduce ransparency of the lens, resulting in

lower temperature readings. Remember:

always store the thermometer in its cover

when not in use.

• Inspect the lens whenever you replace a

lens filter. To clean the lens, very gently

wipe the surface with a cotton swab or soft

cloth moistened with alcohol or mild soap

and warm water (Figure 11). After cleaning,

allow at least 45 minutes drying time before

reattaching a lens filter and taking tem-

peratures. If the lens is damaged, contact

Braun.

Lens Filters

• Replace lens filter after each use. Make

sure that the new lens filter is not damaged.

•Keep lens filters out of direct sunlight and

ultraviolet light for extended periods of time.

Store lens filters away from dust and

contamination.

Thermometer

• Use a soft, dry, clean cloth to clean the

instrument display and exterior. Do not use

abrasive cleaners of submerge in water or

other liquids.

• This instrument contains precision

components and should not be subjected to

extremes in temperature, humidity, direct

sunlight, shock or dust.

• Store unit in a location where the

temperature remains fairly constant and

within the range of 16°C to 40°C (61°F to

104°F). To ensure that the Braun

ThermoScan Thermometer is always ready

to take a temperature (and avoid Err 4),

store it in the room where it is most

frequently used.

16 17

•

If temperatures appear to be reading low,

ensure proper technique is

being used (see page 11 to 12). Make sure the lens is clean and a new

lens filter is attached.

•

If temperatures appear to be reading high,

be sure a new lens filter is

attached. Inspect the lens; if it is damaged, the thermometer must be

serviced.

•

To assure accuracy and sanitary practice,

Braun recommends

replacing the lens filter after each use. Should you run out of lens filters

and need to take a temperature, you may use the following lens filter

cleaning procedure: Clean the lens filter without removing it from the

thermometer with a soft cloth or cotton swab moistened with alcohol or

mild soap and water. Do not use hot or boiling water. Dry completely with

a soft cloth before reusing. Replace lens filter as soon as possible with

a new one (LF 40).

LCD-Display Situation

Solution

The activation button was

pushed sooner than 8

seconds after the previous

activation. The countdown in

seconds will also appear

until another temperature

can be taken.

Wait until the display

shows (ready) before

taking another

temperature.

Flashing The battery power is getting

low. There is enough

remaining power for about

10 days or 10 temperatures.

Install a fresh battery.

Constant The battery is so low that no

more temperatures can be

taken.

Install a fresh battery.

Blank Display 1. The Braun ThermoScan

has switched itself off

automatically.

2. The battery is dead,

improperly connected,

or missing

Depress on-button .

Remove an reinstall

battery. If the LCD-display

remains blank, replace it

with a fresh battery. If

display is still blank,

contact Braun.

Figure 11

Calibration

The thermometer is initially calibrated at the

time of manufacture. If this thermometer is

used in accordance with the Use Instructions,

periodic recalibration os not required. If at any

time you question the accuracy of

measurement, please contact Braun.

Lot number

identification

The date of manufacture can b determined by

referring to the instrument LOT number. This

number can be found by opening the battery

compartment and removing the battery. The

number is preceded by the word “LOT“ and is

in the following format: XXOOOXX or

XOOOXXX, where X designates alpha

characters and O designates numbers. The

first of the three numbers is the last digit of the

year of manufacture. The next two numbers

designate the week of the calendar year that it

was manufactured.

For example: LOT X542XXX. this

thermometer was manufactured during the

42nd week of 1995.

Guarantee

This product is guaranteed for 1 year from

date of purchase against material and/or

workmanship defects. These will be

eliminated either by repairing or exchanging

the appliance as we may choose. All other

claims, including for damages, are excluded.

Service under the guarantee does not affect

its expiry date.

Claims only valid in countries where product

is offcially sold and if accompanied by a

stamped and dated guarantee card.

Claims arising out of the sales contract with

the vendor are not affected by this guarantee.

For UK only:

This guarantee in no way affects your rights

under statutory law.

18 19