Breo Technology UMEWATCH Heart Health Watch User Manual

Shenzhen Breo Technology Co.,Ltd Heart Health Watch

User Manual

Customer service hotline
Operation Instructions
Contents
Brief Introduction
Product Function Configuration
Core Features
Operating Method
Product Configuration
Technical Performance Indicators
Storage and Transport
Maintenance and Warranty Clauses
Warranty Conditions
Undertakings
Warranty Card
Brief Introduction
Product Function Configuration
Front side
Back side
1. OLED screen
4. Electrocardioelectrode GND
3. Electrocardioelectrode SEP
2. Blood oxygen
optoelectronic module
5. Electrocardioelectrode SEN
Left side
Right side
6. Mode key
7. Charging port
8. Set key
Core Features
Heart rate, oxygen saturation and electrocardio detection are incorporated on three-in-one
basis. Three major functions serve as dash board for human body and feed back various
indicators of bodily functions and control 0 health burden.
Merely touching the
surface can make you
informed of heartbeat
frequency, whether in
doors or out of door. It
assists you to judge
adaptive capacity of your
heart in current state.
It accurately, digitally
displays oxygen content in
blood, and systematically
analyzes the impact of
oxygen content on bodily
functions.
Unique electrocardio
module offers important
testing method for judging
heart rate disorder and
myocardial infarction. It
archives
electrocardiogram, and
discovers heart disease and
assesses heart risks.
Operating Method
1. Scan two-dimension code, download and install App
8.15M 1989.0124 times of
downloading
Install
2. Bluetooth connection
Press Mode key for 3
seconds
Bluetooth search matching
Bluetooth connection
Setting
Bluetooth connection
Scanning connection
Sharing
About
Community
Feedback
Exit
3. Blood oxygen testing
Gently touching blood oxygen optoelectronic module with finger enables full
coverage without light leak, maintaining quiesced state, avoiding jittering
displacement and direct highlight
4. Electrocardio testing
With wristwatch worn at the left hand, gently touching the middle of wristwatch
with right finger leads to keep quiesced state, avoiding jittering displacement and
preventing skin from being excessively dry
5. Sleep function
1. Wear wristwatch with automatic sleep identification mode
2. Set early sleeping mode under which wristwatch warns you by means of vibration
in due time
3. Record three statuses: deep sleep, light sleep, waking
4. Six songs for good sleep are available for selection on sleep interface
Songs for good sleep
Sleep plan The 20th day
6. Step counting function
Wear wristwatch, automatically record number of steps and distance, enter APP’s
step counting interface for entering personal parameters, while back desk calculates
consumed caloric value
Number of steps
Complete 80%
Exercise goal 12500
Caloric value
Distance
About me
calorie
km
body mass index
7. Remote caring
Open mobile phone, enter friendly interface, add friend information. View his
health data
Circle of friends
Remind friend of
early sleeping
Remind friend of
exercising
Monitor friend’s
health
Your friend’s authorization of health
monitoring
Agree
Disagree
Hi! Long time no see
Yeah, long time no see
Panda
slow-witted
I
I
Send
Over
Product Configuration
Part name
1. Main product
2. Power adapter
3. Operation Instructions, Warranty Card
Technical Performance Indicators
Storage
Transport
Dimensions: 40mm x 38mm x 10mm (L x W x H)
Weight: 56g (net weight)
Voltage: 5V
In the of storage for more than three months, open case for inspection and charge up
device. Don’t be close to ground, wall and roof. Keep good indoor ventilation, avoid strong
sunlight and corrosion from corrosive gases.
This device is provided with simple shockproof facility and is suitable for air, railway, road
and ship transport, and shall be free from rain, snow, inversion and collision.
Maintenance
Warranty Clauses
Take damp, rat and pollution prevention measures.
Clean host housing in shutdown state.
Put this instrument in safe place after use, don’t place heavy objects on this instrument.
Notify professionals of conducting maintenance in case of fault, don’t arbitrarily dismantle
this instrument.
Dear users:
Thank you very much for choosing UME. You will enjoy after-sales maintenance service
provided by UME on the strength of this card. One device is provided with one card and
another card will not be made available if such card is lost, you shall properly keep it.
Warranty Conditions
1. Free-of-charge part replacement and maintenance services are available for product on
such warranty card within one year as from purchase date. If serial number of device
body can’t be identified or product involves serial number inconsistent with that
registered on such warranty card, the Company does not provide the corresponding
warranty service. (Battery, product housing replacement falls outside the scope of
warranty)
2. Any damage or fault caused by improper use by customer such as supply of incorrect
voltage resulting in accident, or repair of this Product made by maintenance personnel
not authorized by the Company falls outside the scope of warranty.
3. The Company will collect fees for any additional services or transport services beyond
standard warranty scope. UME will send, by post, product to user without charge after
warranty.
4. Warranty excludes damage caused by improper use, custody and maintenance by
customer, dismantlement by maintenance personnel not authorized by UME, and
damage caused by force majeure without product warranty card of the Company. Our
Company can offer maintenance service but collects the corresponding costs for parts.
5. This product warranty card shall be produced at the time of maintenance. The
Company is willing to assume the responsibility for recovery, disposal and reuse after
abandonment of this Product.
Undertaking
In case of product performance fault as from the date of product sales, you can
return/replace goods at original counter for purchase on the strength of product
warranty card or invoice within seven days; this Product shall be free from man-made
damage from external force, accessories including external package and operation
instructions etc are intact at the time of returning/replacing goods; in case of
performance fault 15 days as from the date of product sales, you can elect to replace or
repair goods. If you make purchase by mail from the Company’s website or place
order by 400-830-9700, you can enjoy unconditional return/replacement of goods
within seven days, for details, contact 400-030-9733.
Note: Given continuous upgrading of services, Shenzhen Breo Technology Co.,
Ltd. reserves the right to revise these detailed rules without prior notice.
Warranty Card
Product information
Purchase model
Purchase outlet
Salesman’s signature
Device body number
Purchase date
Valid warranty
1. Warranty card does not come into force unless signed and stamped by sales personnel
of the Company.
2. End user shall provide customer information so as to offer effective after-sales
services.
3. Warranty card and its product serial number shall be produced for maintenance
protection, you shall check whether entry items on warranty card are fully authentic and
its product serial number is complete; if you have any question, contact after-sales
service hotline of the Company. For more product information, please enter
www.breo.com.cn.
After-sales service hotline 400-030-9733
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu