Bridgestone E612 TPMS (Tire Pressure Monitoring System) User Manual User sManual T6x2 F03

Bridgestone Corporation TPMS (Tire Pressure Monitoring System) User sManual T6x2 F03

User Manual

Tire Pressure Monitoring System Onboard Tire Pressure Monitoring System for Mining Trucks MODEL X61x series User’s Manual
System organization About TPMS (Tire Pressure Monitoring System) The TPMS (Tire pressure monitoring system (below, it calls “the system” or “this system”), with the sensor which is installed inside the tire, measures the tire pressure and temperature. － The organization and the function － This system consists of the sensor, the receiver the ECU, the indicator, the hand-held reader and the tag reader, uses with the kind of configuration which is shown in the figure. Fig1. The organization of the system IndicatorECUSensorSensor ReceiverReceiverReceiverReceiverSensor Sensor Sensor Sensor Cable for Receiver Hand-held reader Sensor (Inside the tire) Hand-held reader Tag reader Tire
This system has the following function. ・ The tire pressure and temperature, indicating warning for them and the system state in the Hand-held reader. The wireless is communicated with ECU set up in the vehicle with the Hand-held reader, worth of one vehicle the tire pressure and temperature are read to, and it is possible to display it. ・ The warning, the error code, the tire pressure and temperature indicating in the indicator. If the tire pressure and temperature which was measured with the sensor inside the tire have come off from the set range, it puts out warning to the indicator where is set in the driver's seat and informs the operator. In addition, when the ECU detects the breakdown of the system, the error code which displays the contents of breakdown is indicated in the indicator. Furthermore, the tire pressure and temperature can be indicated in the indicator with the indicator’s button operation. ・ Measurement of the tire pressure and the temperature that uses the Tag reader. With the Tag reader, the tire pressure and temperature can read directly from the sensor inside the tire. And it can be indicated read data in the Hand-held reader by the wireless communication. In this system, for the tire pressure management, it is necessary to set below. ・ Set up of the ECU By the Hand-held reader, the ECU can set up and change the information of model, the vehicle number etc and the warning condition. ・ Set up of the Sensor By using the Hand-held reader and the Tag reader, it can set up and change the installation of the vehicle classification, the number and the information of the tire position to the Sensor. ・ Switch of operation mode of the Sensor By using the Hand-held reader and the Tag reader, it can switch the “The mode of Normal sending”, “The mode of sending stop” and “The mode of filling up the tire internal pressure”. ・ Set up of the Tag reader By the Hand-held reader, it can set up and change the number of the Tag reader and information of the monthly average temperature etc to the Tag reader. This EUT has two following modes. ・ Normal mode System doesn't detect any emergency signal. ・ Alarm mode System detects that the pressure of the tire is too low and/or temperature is too high.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

Navigation menu