Bridgestone K812 NEXT B-TAG July 2017 Ver Reader/Writer Outer case User Manual 05

Bridgestone Corporation NEXT B-TAG July 2017 Ver Reader/Writer Outer case 05

05 User Manual

1/6 Tire Pressure Monitoring System Reader/Writer Outer case K812 Users Manual
2/6  Overview This device is equipped with TC55 (manufactured by Zebra Technologies Corporation), which has a dedicated application (Servicing App.) installed, becomes a device which communicates with the sensor mounted in the tire.  Applicable regulations Radio Frequency Interference Requirements-FCC FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio Transmitters (Part15) This device complies with part 15 of FCC Rules and ISED’s applicable license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements-Canada CAN ICES-3(B)/NMB-3(B)
3/6  Name and function of each part The names and functions of each part are as follows. ① POWER BUTTON (Extension) When this button is pushed, press the power button of the mounted TC55. ② POWER LED Lamp ③ Trigger BUTTON Outer case turns on when power is on. Press it when sending a command on the sensor communication screen. ④ Sensor communication LED Lamp ⑤ Micro-USB Plug Lights up when sensor communication is available. Connect to TC55. ⑥ Micro-USB Jack It is used for charging TC55 and connecting with TC55 and PC. Note: Restart TC55 after connecting. Also, Outer case does not work during connection. 1 42356
4/6  How to install TC55  Follow the procedure below to install TC55 in the Outer case. Please install Servicing App. For TC55 to be installed before work. ① Remove the screws (4 places) with the supplied screwdriver, remove the cover, and make the USB connector vertical as shown in the right picture. ② Rotate the USB cap of TC 55 by 180 ° as shown in the photo on the left and insert TC 55 into the USB connector of Outer case.
5/6 ③ Please TC55 to be parallel with Outer case. In that state slowly push it into the Outer case with both hands. In addition, the USB cap of TC 55 will be put in the position of the picture on the right. ④ Place the cover and fix the screws (4 places) with the supplied screwdriver to complete mounting.  How to Sensor communication To communicate with the sensor in the tire, select the communication item on the TC55 screen and press the trigger button near the sensor (0.8 m or less) you want to measure. For details of sensor communication, please check the instruction manual of Servicing App.  How to Charging the TC55 Charge the TC55 to the Micro-USB Plug of the Outer case with the cable with the Micro-USB (Type A or B) jack. To charge the TC55, restart it in the power OFF state or charging connection state. Note: Outer case does not function during charging.  How to Connect TC55 and PC To the Outer case Micro-USB Plug Connect the TC55 with the PC with the cable with the Micro-USB (Type A or B) jack. Use a cable of 0.5 m or less to connect the TC 55 and the personal computer. Also, to connect the TC55 to the computer, restart TC55 in the connected state. Note: Outer case does not work during connection.
6/6 △ CAUTION Failure to observe the following may lead to a short circuit or charging, causing the battery to start leaking or generate extreme heat, or the battery may even start a fire or explode. ● Never attempt to disassemble or modify the Outer case. ● Do not handle the Outer case with wet hands. Keep the product away from water. ● Always use batteries specified by TC 55. ● Be careful not to drop or step on the Outer case, or hit it against a hard object. ● Do not leave the Outer case in places of severe temperature change or outside the specified storage temperature range. ● Turn off the power before removing the TC55 from the Outer case. Be careful not to press the POWER button while removing the TC55. Otherwise, the Outer case may fail. ● Remove the TC55 from the Outer case if it will not be used for an extended period. Otherwise, The batteries in TC55 may start leaking, damaging the Outer case. ● Always use 0.5 m or less Micro-USB cable. Otherwise, the battery charge or communicating with the PC may fail ● Before handling the TC55 or TC55 built-in battery, please read the operation manual of TC55 and use it.

Navigation menu