Broadcom BRCM1005-HC 802.11g Mini PCI card co-located with Bluetooth User Manual startup and reference guide

Download:
Mirror Download [FCC.gov]
Document ID	347975
Application ID	xfOgkn9/mRm75hDIaB9R+w==
Document Description	User Guide Setup 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	210.87kB (2635870 bits)
Date Submitted	2003-08-14 00:00:00
Date Available	2003-08-14 00:00:00
Creation Date	2003-07-23 16:56:23
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-07-23 16:56:42
Document Title	startup and reference guide
Document Creator	FrameMaker 6.0
Document Author:	Hewlett-Packard Development Company, L.P.

HP-323140-001.book Page i Tuesday, April 1, 2003 4:20 PM
startup and reference guide
hp compaq notebook series
Document Part Number: 323140-001
June 2003
Part 1: Startup
The Startup part of this guide explains how to set up your
notebook for the first time.
Part 2: Reference
The Reference part of this guide explains how to identify and use
the hardware and software features on your notebook.
HP-323140-001.book Page ii Tuesday, April 1, 2003 4:20 PM
Contents
1 Startup
2 Hardware
3 Keyboard
4 Power
5 Drives and Drive Media
6 Multimedia
7 Communications
8 Hardware Options and Upgrades
9 Software Updates, Restorations and
Utilities
A Specifications
Index
HP-323140-001.book Page 1 Tuesday, April 1, 2003 4:20 PM
Part-1
Startup
This Startup and Reference Guide provides information about
setting up and using your notebook.
■
To set up your notebook hardware and software for the first
time, follow the procedures in this “Startup” part.
■
To learn more about using your notebook, refer to the
remaining “Reference” part of this book. To find information
about a specific topic:
❏
Refer to the chapter Contents on the first page of each
chapter, or
❏
Refer to the Index.
Startup and Reference Guide—Part 1
1–1
HP-323140-001.book Page 2 Tuesday, April 1, 2003 4:20 PM
Startup
Setting Up the Hardware
To set up the notebook for the first time, you need the notebook,
the AC adapter 1, the power cord 2, and the battery pack 3.
During hardware setup, you will:
■
Insert the battery pack into the notebook, so the battery can
begin to charge as soon as the notebook is connected to
external power.
■
Open the notebook.
■
Connect the notebook to external power and turn on the
notebook.
You will then proceed to software setup.
Identifying the AC adapter, the power cord, and the battery pack
(Power cords vary by region and country.)
1–2
Startup and Reference Guide—Part 1
HP-323140-001.book Page 3 Tuesday, April 1, 2003 4:20 PM
Startup
Inserting a Battery Pack
To insert the battery pack into the battery bay:
1. Turn the notebook underside up on a flat surface.
2. Insert the alignment tab on the battery pack into the
alignment slot on the notebook 1.
3. Tilt the battery pack downward until it snaps into place 2.
Inserting a battery pack
Ä
CAUTION: To ensure that the correct drivers load and to prevent file
corruption or damage to components, do not remove the battery pack
until the notebook has been connected to external AC power.
Startup and Reference Guide—Part 1
1–3
HP-323140-001.book Page 4 Tuesday, April 1, 2003 4:20 PM
Startup
Opening the Notebook
To open the notebook:
1. Place the notebook display side up on a flat surface near an
electrical outlet.
2. Slide the display release latch 1 as you raise the display 2.
Opening the notebook
1–4
Startup and Reference Guide—Part 1
HP-323140-001.book Page 5 Tuesday, April 1, 2003 4:20 PM
Startup
Connecting the Notebook to External Power
To connect the notebook to external AC power:
1. Plug the AC adapter cable into the power connector 1.
2. Plug the power cord into the AC adapter 2, then into an
electrical outlet 3.
When the notebook is receiving external power, the battery
light 4 turns on.
Connecting the notebook to external power (Power cords and
outlets vary by region and country.)
Startup and Reference Guide—Part 1
1–5
HP-323140-001.book Page 6 Tuesday, April 1, 2003 4:20 PM
Startup
Charging a New Battery Pack
The battery pack you inserted earlier begins to charge as soon as
the notebook is connected to external power. Charge status is
indicated by the battery light.
■
The battery light is on and amber while a battery pack
inserted into the notebook is charging.
■
The battery light is on and green when a battery pack inserted
into the notebook is fully charged.
HP recommends that you leave the notebook connected to
external power until the battery pack is fully charged and the
battery light turns green. (A partially charged new battery
pack can run the notebook after initial software setup is
complete, but battery charge displays will not be accurate
until the new battery pack has been fully charged.)
Identifying the battery light
1–6
Startup and Reference Guide—Part 1
HP-323140-001.book Page 7 Tuesday, April 1, 2003 4:20 PM
Startup
Turning On the Notebook
To turn on the notebook, press the power button 1. When the
notebook turns on, the power/standby light 2 turns on, and
you are prompted to begin software setup.
Turning on the notebook
If the notebook does not turn on:
■
Make sure that the AC adapter is securely plugged into an
electrical outlet.
■
Make sure that the outlet is providing power. (To confirm that
the outlet is providing power, plug another device into the
outlet.)
■
If you have installed a battery pack, make sure that the battery
pack is firmly seated.
■
Refer to the Worldwide Telephone Numbers booklet (English
only) included with the notebook to contact an HP Customer
Care Center.
Startup and Reference Guide—Part 1
1–7
HP-323140-001.book Page 8 Tuesday, April 1, 2003 4:20 PM
Startup
Setting Up the Software
Ä
CAUTION: To prevent file corruption and ensure that the correct drivers
are installed, install software only when the notebook is connected to
external power through the AC adapter. During the installation:
■ Do not unplug the notebook from external power.
■ Do not shut down the notebook or initiate Standby or Hibernation.
■ Do not insert, remove, connect, or disconnect any device, cable,
or cord.
Installing Basic Software
When the notebook is connected to external power and turned on
for the first time, a prompt to set up the operating system and
other basic software is displayed on the screen.
Before responding to the prompt and proceeding through the
on-screen instructions, read the following caution and other
installation information.
■
After beginning the software setup, you must complete the
entire process without interruption. Setup time varies.
■
If you are prompted to select a language, choose carefully. On
some models, the languages that you do not choose are
deleted from the system and cannot be restored during the
installation.
■
Regional settings and most other preferences that you may
select as you set up the basic software can be selected or
changed later, after the operating system is installed.
■
When you are prompted to accept the End User License
Agreement, you must choose Accept to continue the
software setup.
setup, it is normal for some notebook models to pause
✎ During
occasionally for up to 2 minutes and to restart several times.
These pauses and restarts occur only during initial software setup.
They will not occur during standard Windows startups.
1–8
Startup and Reference Guide—Part 1
HP-323140-001.book Page 9 Tuesday, April 1, 2003 4:20 PM
Startup
Installing Optional Software
Step-by-step instructions for installing and using many of the
applications and utilities included with the notebook are provided
later in this guide. If you prefer to install optional software now,
the following information may be helpful.
To install an application or a utility from a CD, refer to the
instructions included with the CD. If printed instructions are not
included in the CD package, they may be displayed on the screen
when the CD is inserted.
To view or install preloaded utilities or applications, select Start >
All Programs > Software Setup. Then:
■
To display the descriptions and space requirements of a
preloaded item without installing it, select the Next button,
then select an item. After viewing the information that is
displayed, select the Cancel button.
■
To install a preloaded item, select the check box for the item,
select the Next button, then follow the instructions on the
screen.
Startup and Reference Guide—Part 1
1–9
HP-323140-001.book Page 10 Tuesday, April 1, 2003 4:20 PM
Startup
Setting Regional and Display Preferences
Keyboard language and other regional preferences, such as time,
date, and currency format, are set in the Regional Options
window of the operating system. To access the Regional Options
window, select Start > Control Panel > Date, Time, Language and
Regional Options icon.
Screen appearance settings are accessed from the operating
system Appearance and Themes window. To access the
Appearance and Themes window, select Start > Control
Panel > Appearance and Themes icon. To access the settings that
control the size of the items displayed on the screen, select the
Change Resolution task.
Turning Off the Notebook
Turn off the notebook by using the Windows shutdown
procedure: Select Start > Turn Off Computer > Turn Off.
If the notebook does not respond, try the following emergency
shutdown procedures in the sequence provided:
1–10
■
If the notebook is running Microsoft Windows XP
Professional: press ctrl+alt+delete. Select the Shut Down
button, then select Shut down from the drop down list.
■
Press and hold down the power button for at least 4 seconds.
■
Unplug the notebook from external power and remove the
battery pack. For instructions see “Replacing a Battery Pack”
in Chapter 4.
Startup and Reference Guide—Part 1
HP-323140-001.book Page 11 Tuesday, April 1, 2003 4:20 PM
Startup
Protecting the Notebook from
Power Surges
To protect the notebook from the power surges that may be
caused by an uncertain power supply or an electrical storm:
■
Plug the notebook power cord into an optional, high-quality
surge protector. Surge protectors are available from most
computer or electronics retailers.
■
Provide surge protection on the cable that connects a modem
to the telephone line.
■
During an electrical storm, run the notebook on battery power
or shut down the notebook and disconnect the power cord.
Protecting the Notebook Against
Viruses
When you use the notebook for email, network, or Internet
access, you expose the notebook to computer viruses. Computer
viruses can disable the operating system, your applications, or
your utilities or cause them to function abnormally.
Antivirus software can detect most viruses, destroy them, and,
in most cases, repair damage they have caused. To provide
protection against newly discovered viruses, antivirus software
must be updated.
The Norton AntiVirus 2003 software installed on your notebook
provides 60 days of free virus updates.
For Norton AntiVirus 2003 instructions and more information
about virus updates, refer to the Help file within the application or
select Start > Help and Support.
Startup and Reference Guide—Part 1
1–11
HP-323140-001.book Page 12 Tuesday, April 1, 2003 4:20 PM
Startup
Using the Notebook Safely
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
For more safety and regulatory information, as well as
instructions for protecting the notebook against electrostatic
discharge, refer on the Documentation Library CD to the
Regulatory and Safety Notices guide.
The Documentation Library CD is included with your notebook.
Å
WARNING: To reduce the risk of electric shock or damage to your
equipment:
■ Plug the power cord into an electrical outlet that is easily accessible
at all times.
■ Disconnect power from the product by unplugging the power cord
from the electrical outlet.
■ If provided with a three-conductor power cord with a three-pin
attachment plug, plug the cord into a grounded (earthed) outlet. Do
not disable the power cord grounding pin. The grounding pin is an
important safety feature.
Å
WARNING: To reduce the risk of serious injury, read the Safety &
Comfort Guide. It describes proper workstation setup and proper posture,
health, and work habits for computer users. The Safety & Comfort Guide
also provides important electrical and mechanical safety information. This
guide is available on the Web at http://www.hp.com/ergo, on the hard
drive, or on the Documentation Library CD that is included with
the product.
Å
WARNING: This notebook is designed to run demanding applications
at full power. As a result of increased power consumption, it is normal
for the notebook to feel warm or hot when used continuously. To avoid
potential discomfort or burns, do not block the air vents or use the
notebook on your lap for extended periods. The notebook complies with
the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment
(IEC 60950).
1–12
Startup and Reference Guide—Part 1
HP-323140-001.book Page 1 Tuesday, April 1, 2003 4:20 PM
Part 2
Reference
Startup and Reference Guide—Part 2
HP-323140-001.book Page 2 Tuesday, April 1, 2003 4:20 PM
Startup and Reference Guide—Part 2
HP-323140-001.book Page 1 Tuesday, April 1, 2003 4:20 PM
Hardware
Contents
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Keys and Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4
Power Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
Audio Buttons and Speakers . . . . . . . . . . . . . . . . . . . 2–7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9
Connectors and Jacks. . . . . . . . . . . . . . . . . . . . . . . . . 2–9
Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10
Left Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Right Side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–12
Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–13
Bays and Memory Compartment. . . . . . . . . . . . . . . 2–13
Docking Connector and Vents. . . . . . . . . . . . . . . . . 2–14
Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15
Additional Standard Components . . . . . . . . . . . . . . . . . 2–16
Cables and Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–16
Adapters and Battery Pack . . . . . . . . . . . . . . . . . . . 2–17
Restoration and Documentation CDs . . . . . . . . . . . 2–18
Startup and Reference Guide—Part 2
2–1
HP-323140-001.book Page 2 Tuesday, April 1, 2003 4:20 PM
Hardware
Display
Display
Display release latch
2–2
Opens the notebook.
Startup and Reference Guide—Part 2
HP-323140-001.book Page 3 Tuesday, April 1, 2003 4:20 PM
Hardware
Top
TouchPad
Top: TouchPad
TouchPad on/off button
Enables/disables the TouchPad.
TouchPad*
Moves the pointer and selects or
activates items on the screen.
TouchPad light
On: TouchPad is enabled.
TouchPad scroll zones (2)*
Scroll upward or downward.
Left and right TouchPad
buttons*
Function like the left and right buttons
on an external mouse.
*This table describes default settings. For information about changing the
functions of TouchPad features, see “Setting TouchPad Preferences” in
Chapter 3.
Startup and Reference Guide—Part 2
2–3
HP-323140-001.book Page 4 Tuesday, April 1, 2003 4:20 PM
Hardware
Keys and Antenna
Top: Keys and Antenna
Fn key
Combines with other keys to perform
system tasks. For example, pressing
Fn+F7 increases screen brightness.
Function keys (12)
Perform system and application tasks.
When combined with the Fn key, the
function keys F1 and F3 through F12
perform additional tasks as hotkeys.
Keypad keys (15)
Can be used like the keys on an
external numeric keypad.
Applications key
Displays a shortcut menu for items
beneath the pointer.
Antenna (available on select
models and not visible from
outside the notebook)*
Sends and receives wireless device
signals.
Microsoft logo key
Displays the Windows Start menu.
*The notebook has 2 antennas. The second is on the right side of the
notebook. For optimal transmissions, keep the areas immediately over
the antennas free from obstructions.
2–4
Startup and Reference Guide—Part 2
HP-323140-001.book Page 5 Tuesday, April 1, 2003 4:20 PM
Hardware
Power Controls
Top: Power Controls
Power button*
When the notebook is:
■
■
■
■
Off, press to turn on the notebook.
On, briefly press to initiate Hibernation.
In Standby, briefly press to resume from Standby.
In Hibernation, briefly press to restore from
Hibernation.
✎
Display
switch*
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for at least 4 seconds
to turn off the notebook.
■ If the notebook is closed while on, turns off the
display.
■ If the notebook is opened while in Standby, turns
on the notebook (resumes from Standby).
*This table describes default settings. For information about changing the
function of the power button or display switch, see “Setting Power Control
Preferences” in Chapter 4.
Startup and Reference Guide—Part 2
2–5
HP-323140-001.book Page 6 Tuesday, April 1, 2003 4:20 PM
Hardware
Lights
Top: Lights
Num lock light
On: Num lock or the internal keypad is on.
Caps lock light
On: Caps lock is on.
Mute light
On: Volume is muted.
Wireless device light
(available on select
models)
On: An optional internal wireless device is
turned on.
Battery light
On: The notebook is receiving adequate
external power.
■ On amber: A battery pack is charging.
■ On green: A battery pack is fully charged.
■ Flashing: A battery pack is malfunctioning
and may need to be replaced.
IDE (Integrated Drive
Electronics) drive light
On: The internal hard drive or optical drive is
being accessed.
Power/standby light
On: Notebook is turned on.
Flashing: Notebook is in Standby.
2–6
Startup and Reference Guide—Part 2
HP-323140-001.book Page 7 Tuesday, April 1, 2003 4:20 PM
Hardware
Audio Buttons and Speakers
Top: Audio Buttons and Speakers
Increase volume button
Increases system volume.
Decrease volume button
Decreases system volume.
Mute button
Mutes or restores volume.
Stereo speakers (2)
Produce stereo sound.
Startup and Reference Guide—Part 2
2–7
HP-323140-001.book Page 8 Tuesday, April 1, 2003 4:20 PM
Hardware
Front Panel
Front Panel
2–8
SD Card light
SD (Secure Digital)
Card slot
Microphone jack
Connects an optional monaural or stereo
microphone.
Audio-out jack
Connects optional headphones or
powered stereo speakers. Also connects
the audio function of an audio/video
device such as a television or VCR.
Wireless device button
(available on select
models)
Turns an optional internal wireless device
on or off.
On: An SD Card or MMC is being
accessed.
Supports SD Cards and
MMCs (multimedia cards).
Startup and Reference Guide—Part 2
HP-323140-001.book Page 9 Tuesday, April 1, 2003 4:20 PM
Hardware
Rear Panel
Connectors and Jacks
Rear Panel: Connectors and Jacks
External monitor connector
Connects an optional VGA external
monitor or projector.
S-Video jack
Connects an optional S-Video device,
such as a television, VCR, camcorder,
projector, or video capture card.
USB connectors (3)
Connect optional 2.0-compliant USB
devices.
RJ-45 network jack
Connects an Ethernet network cable.
(An Ethernet network cable is included
with select models.)
RJ-11 telephone jack
Connects a modem cable. (A modem
cable is included with select models.)
Parallel connector (available
on select models)
Connects an optional parallel device
such as a printer.
1394 connector
Connects an optional 1394 device
such as a camcorder.
Startup and Reference Guide—Part 2
2–9
HP-323140-001.book Page 10 Tuesday, April 1, 2003 4:20 PM
Hardware
Vent
Rear Panel: Vent
Exhaust vent*
Provides airflow to cool internal components.
Ä
To prevent overheating, do not
obstruct vents. Do not allow a hard
surface, such as a printer, or a soft
surface, such as pillows or thick rugs
or clothing, to block airflow.
*The notebook has 3 vents. The other vents are on the underside of the
notebook.
2–10
Startup and Reference Guide—Part 2
HP-323140-001.book Page 11 Tuesday, April 1, 2003 4:20 PM
Hardware
Left Side
Left Side
PC Card slot
Supports an optional Type I or Type II
32-bit (CardBus) or 16-bit PC Card.
PC Card eject button
Ejects an optional PC Card from the
PC Card slot.
Optical drive*
Supports an optical disc.
*The type of optical drive, for example a CD, DVD, or combination CD/DVD
drive, varies by model.
Startup and Reference Guide—Part 2
2–11
HP-323140-001.book Page 12 Tuesday, April 1, 2003 4:20 PM
Hardware
Right Side
Right Side
Antenna (available on select
models and not visible from
outside the notebook)*
Sends and receives wireless device
signals.
Infrared port
Provides wireless communication
between the notebook and an optional
IrDA-compliant device.
Power connector
Connects an AC adapter cable.
Security cable slot
Attaches an optional security cable to
the notebook.
*The notebook has 2 antennas. The second is on the right side of the
notebook. For optimal transmissions, keep the areas immediately over
the antennas free from obstructions.
2–12
Startup and Reference Guide—Part 2
HP-323140-001.book Page 13 Tuesday, April 1, 2003 4:20 PM
Hardware
Underside
Bays and Memory Compartment
Underside: Bays and Memory Compartment
Battery bay
Holds a battery pack.
Battery pack release latch
Releases a battery pack from the
battery bay.
Memory compartment
Contains 1 memory slot for an
optional 128-MB, 256-MB, 512-MB,
or 1024-MB memory module. As
shipped, the memory slot may be
filled with a replaceable memory
module or vacant, depending on the
notebook model.
Hard drive bay
Holds the internal hard drive.
Startup and Reference Guide—Part 2
2–13
HP-323140-001.book Page 14 Tuesday, April 1, 2003 4:20 PM
Hardware
Docking Connector and Vents
Underside: Docking Connector and Vent
Docking connector*
Connects the notebook to an optional
port replicator.
Vents (3)
Allow airflow to cool internal
components.
Ä
To prevent overheating, use
the notebook only on hard
surfaces which cannot
obstruct the vents. Do not
allow a soft surface, such as
bedding, clothing or a thick
rug, to block airflow.
*As shipped, the docking connector is not visible. The docking connector is
beneath the docking connector cover, which protects the connector when
the connector is not in use.
2–14
Startup and Reference Guide—Part 2
HP-323140-001.book Page 15 Tuesday, April 1, 2003 4:20 PM
Hardware
Labels
The labels affixed to the notebook and some notebook components
provide information you may need when troubleshooting system
problems or traveling internationally with the notebook.
■
The Microsoft Certificate of Authenticity label contains the
Product Key number. You may need this number to update or
troubleshoot the operating system.
■
The system label provides regulatory information about the
notebook.
■
The product identification label contains the serial number of
the notebook and a code describing the original configuration
of the notebook. You will need the notebook serial number if
you call customer support.
■
The modem approvals label, which is affixed to an optional
internal modem, provides regulatory information.
■
Wireless certification labels, which are specific to various
types of optional wireless devices, are affixed to the notebook
and provide regulatory information.
Startup and Reference Guide—Part 2
2–15
HP-323140-001.book Page 16 Tuesday, April 1, 2003 4:20 PM
Hardware
Additional Standard Components
The components included with the notebook vary by region,
country, notebook model, and the optional hardware ordered. The
following sections identify the standard external accessories and
components included with most notebook models.
Cables and Cord
Additional Standard Components: Cables and Cord
Modem cable
(included with select
models)
Network cable
(included with select
models)
Power cord*
Connects a modem to an RJ-11 telephone
jack or to a country-specific modem adapter.
✎
A modem cable has a 6-pin, RJ-11
telephone connector at each end.
Connects the notebook to an Ethernet
network jack.
✎
A network cable has an 8-pin, RJ-45
network connector at each end.
Connects an AC adapter to an AC electrical
outlet.
*Power cords vary in appearance by region and country.
2–16
Startup and Reference Guide—Part 2
HP-323140-001.book Page 17 Tuesday, April 1, 2003 4:20 PM
Hardware
Adapters and Battery Pack
Additional Standard Components: Adapters and
Battery Pack
AC adapter
Converts AC power to DC power.
Country-specific modem
adapter (included by region
as required)
Adapts the modem cable to a
non-RJ-11 telephone jack.
Japan-specific outlet adapter
(Japan only)
Connects the AC adapter to a 2-prong
electrical outlet.
Battery pack
Runs the notebook when the notebook
is not connected to external power.
Startup and Reference Guide—Part 2
2–17
HP-323140-001.book Page 18 Tuesday, April 1, 2003 4:20 PM
Hardware
Restoration and Documentation CDs
CDs for repairing or reinstalling software and for obtaining
supplementary information about the notebook are included with
the notebook.
■
For information about restoring, repairing, or reinstalling
software, refer to Chapter 9, “Software Updates, Restorations
and Utilities.”
■
For supplementary information about the notebook, refer to
the Documentation Library CD. The Documentation Library
CD included with all models includes the following guides.
Additional guides—for example, instruction manuals for
using an optional wireless device—are included with select
models.
For Information About These Topics
Select This Guide
■ Caring for the notebook and drives
■ Preparing the notebook for transport
■ Traveling with the notebook
Maintenance, Shipping
and Travel
internationally
■ Solving notebook problems yourself
■ Getting help
Troubleshooting
■ Governmental and safety information
■ Protecting the notebook from static
Regulatory and Safety
Notices
electricity
Ergonomic and safety information
Safety & Comfort Guide
General instructions for using modem
AT commands
Modem Command
Guidelines (Advanced
Users Only)
AT commands supported by a Lucent/Agere
modem. (An optional internal modem
supports the Lucent/Agere command set.)
Lucent/Agere
Command Set
(Advanced Users Only)*
*Available in English only.
2–18
Startup and Reference Guide—Part 2
HP-323140-001.book Page 1 Tuesday, April 1, 2003 4:20 PM
Keyboard
Contents
TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying TouchPad Components . . . . . . . . . . . . . .
Using the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . .
Setting TouchPad Preferences . . . . . . . . . . . . . . . . . .
Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . .
Hotkey Quick Reference . . . . . . . . . . . . . . . . . . . . . .
Hotkey Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . .
Hotkey Commands . . . . . . . . . . . . . . . . . . . . . . . . . .
Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning the Keypad On and Off . . . . . . . . . . . . . . . .
Switching the Functions of Keypad Keys . . . . . . . . .
Startup and Reference Guide—Part 2
3–2
3–2
3–3
3–3
3–4
3–4
3–5
3–5
3–6
3–8
3–9
3–9
3–1
HP-323140-001.book Page 2 Tuesday, April 1, 2003 4:20 PM
Keyboard
TouchPad
Identifying TouchPad Components
The TouchPad includes the following components:
1 TouchPad
4 TouchPad on/off button
2 Left and right TouchPad buttons
5 TouchPad light
3 TouchPad scroll zones (2)
Identifying TouchPad components
3–2
Startup and Reference Guide—Part 2
HP-323140-001.book Page 3 Tuesday, April 1, 2003 4:20 PM
Keyboard
Using the TouchPad
The TouchPad provides the navigation, selection, and scroll
functions of an optional external mouse.
■
To move the pointer, slide your finger across the TouchPad
surface in the direction you want to move the pointer.
■
If the pointer continues to move after you lift your finger
from the TouchPad surface, wait a few seconds and the
pointer will stop moving.
■
To execute the click functions of the left or right button on
an external mouse, press the left or right TouchPad button.
■
To scroll upward, press the icon in the upward scroll zone. To
scroll downward, press the icon in the downward scroll zone.
■
To enable or disable the TouchPad, press the TouchPad
button. When the TouchPad is enabled, the TouchPad light
is on.
The notebook turns on with the TouchPad enabled. Users
who work with keystrokes rather than mouse actions may
prefer to disable the TouchPad to prevent accidental
TouchPad activity.
Setting TouchPad Preferences
Pointer speed and shape, click speed, mouse trails, and other
pointing device preferences are set in the operating system Mouse
Properties window. To access Mouse Properties, select Start >
Control Panel > Printers and Other Hardware icon > Mouse icon.
Startup and Reference Guide—Part 2
3–3
HP-323140-001.book Page 4 Tuesday, April 1, 2003 4:20 PM
Keyboard
Hotkeys
Identifying Hotkeys
Hotkeys are preset combinations of the Fn key 1 and one of the
function keys 2.
The icons on the function keys F1 and F3 through F12 represent the
hotkey functions available on the notebook.
Identifying hotkeys
3–4
Startup and Reference Guide—Part 2
HP-323140-001.book Page 5 Tuesday, April 1, 2003 4:20 PM
Keyboard
Hotkey Quick Reference
The following table identifies the default hotkey functions. For
information about changing the function of the Fn+F5 hotkeys, see
the “Setting Power Control Preferences” section in Chapter 4.
Default Function
Hotkeys
Open Help and Support window.
Fn+F1
Open Microsoft Internet Explorer.
Fn+F3
Switch display and image.
Fn+F4
Initiate Standby.
Fn+F5
Initiate QuickLock.
Fn+F6
Decrease display brightness.
Fn+F7
Increase display brightness.
Fn+F8
Play, pause, or resume an audio CD or DVD.
Fn+F9
Stop an audio CD or DVD.
Fn+F10
Play the previous track or chapter on an audio CD
or DVD.
Fn+F11
Play the next track on an audio CD or DVD.
Fn+F12
Hotkey Procedures
To use a hotkeys command on the notebook keyboard, use either
of the following procedures:
■
Briefly press the Fn key, then briefly press the second key of
the hotkeys command.
■
Press and hold down the Fn key, briefly press the second key
of the hotkeys command, then release both keys at the
same time.
Startup and Reference Guide—Part 2
3–5
HP-323140-001.book Page 6 Tuesday, April 1, 2003 4:20 PM
Keyboard
Hotkey Commands
Open Help and Support Window (Fn+F1)
The Fn+F1 hotkeys open the Help and Support window. From the
Help and Support window you can access general information
about your notebook, links to software updates and online
technical support specialists, and other support features.
For more information about the Help and Support window, see
the “Using the Help and Support Window” section in Chapter 9,
“Software Updates, Restorations and Utilities.”
Open Internet Explorer (Fn+F3)
The Fn+F3 hotkeys open Internet Explorer. After you have set up
your Internet or network services and your Internet Explorer
home page, you can use the Fn+F3 hotkeys for quick access to
your home page and the Internet.
Switch Image (Fn+F4)
The Fn+F4 hotkeys switch the image among display devices
connected to the external monitor connector or the S-Video jack
on the notebook. For example, if an external monitor is connected
to the notebook, pressing the Fn+F4 hotkeys switches the image
among the notebook display, the external monitor display, and a
simultaneous display on both the notebook and the monitor.
Initiate Standby (Fn+F5)
The Fn+F5 hotkeys are set by default to initiate Standby. Standby
can be initiated only while the notebook is on. If the notebook is
in Hibernation, you must restore from Hibernation before you can
initiate Standby.
3–6
Startup and Reference Guide—Part 2
HP-323140-001.book Page 7 Tuesday, April 1, 2003 4:20 PM
Keyboard
To restore from Hibernation or resume from Standby, briefly
press the power button. For more information about using
Standby and Hibernation, refer to Chapter 4, “Power.”
For information about changing the function of the Fn+F5 hotkeys,
refer in Chapter 4 to the “Setting Power Control Preferences”
section.
Initiate QuickLock (Fn+F6)
The Fn+F6 hotkeys initiate the operating system QuickLock
security feature. The QuickLock feature disables the keyboard
and displays the log on screen. QuickLock does not disable the
TouchPad.
Before you can use the QuickLock feature, you must set a
Windows system password. For instructions, refer to your
operating system documentation.
After you have set a Windows system password:
■
To initiate QuickLock, press Fn+F6.
■
To exit QuickLock, enter your Windows system password.
Decrease Brightness (Fn+F7)
The Fn+F7 hotkeys decrease notebook screen brightness.
Increase Brightness (Fn+F8)
The Fn+F8 hotkeys increase notebook screen brightness.
Play, Pause, or Resume an Audio CD or DVD (Fn+F9)
The Fn+F9 hotkeys function only when an audio CD or DVD is
inserted. If the audio CD or DVD is
■
Not playing, press the Fn+F9 hotkeys to begin or resume
the play.
■
Playing, press the Fn+F9 hotkeys to pause the play.
Startup and Reference Guide—Part 2
3–7
HP-323140-001.book Page 8 Tuesday, April 1, 2003 4:20 PM
Keyboard
Stop an Audio CD or DVD (Fn+F10)
The Fn+F10 hotkeys stop the play of an audio CD or DVD that is
playing.
Play Previous Track of an Audio CD or DVD (Fn+F11)
The Fn+F11 hotkeys play the previously played track of an audio
CD or DVD that is playing.
Play Next Track of an Audio CD or DVD (Fn+F12)
The Fn+F12 hotkeys play the next track of an audio CD or DVD
that is playing.
Keypad
The keypad consists of 15 keys that can be used like the keys on
an external keypad. When the keypad is turned on, each keypad
key performs the functions indicated by the icon in the upper right
corner of the key.
Identifying the keypad keys
3–8
Startup and Reference Guide—Part 2
HP-323140-001.book Page 9 Tuesday, April 1, 2003 4:20 PM
Keyboard
Turning the Keypad On and Off
When the keypad is off, press Fn+num lk 1 to turn the keypad on.
When the keypad is on, press Fn+num lk to turn the keypad off. The
num lock light 2 turns on when the keypad is on.
Identifying the Fn and num lk keys and the num lock light
Switching the Functions of Keypad Keys
You can temporarily switch the functions of a keypad key
between its standard function and its keypad function.
■
To use a key on the keypad as a keypad key while the keypad
is turned off, press and hold Fn while pressing the key.
■
To use a key on the keypad as a standard key while the
keypad is turned on:
❏
Press and hold Fn to type with the key in lowercase.
❏
Press and hold Fn+shift to type with the key in uppercase.
Releasing the Fn key returns a keypad key to its set function. For
example, a keypad key returns to its keypad function if the
keypad is turned on or to its standard function if the keypad is
turned off.
Startup and Reference Guide—Part 2
3–9
HP-323140-001.book Page 10 Tuesday, April 1, 2003 4:20 PM
Keyboard
3–10
Startup and Reference Guide—Part 2
HP-323140-001.book Page 1 Tuesday, April 1, 2003 4:20 PM
Power
Contents
Understanding Standby, Hibernation and Shutdown . . . . 4–2
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
Choosing Standby, Hibernation or Shutdown . . . . . . . . . 4–4
Using Standby, Hibernation and Shutdown
Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Identifying Power Controls and Indicators . . . . . . . . 4–5
Turning the Notebook or Display On or Off . . . . . . . 4–6
Using Emergency Shutdown Procedures . . . . . . . . . 4–6
Initiating or Resuming from Standby . . . . . . . . . . . . 4–7
Initiating or Restoring from Hibernation. . . . . . . . . . 4–8
Setting Power Control Preferences . . . . . . . . . . . . . . . . . 4–9
Using Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10
Identifying the Battery and Power/Standby
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10
Switching Between Battery and External Power. . . 4–11
Charging a Battery Pack . . . . . . . . . . . . . . . . . . . . . 4–11
Monitoring the Charge in a Battery Pack . . . . . . . . 4–12
Managing Low-Battery Conditions . . . . . . . . . . . . . 4–13
Calibrating a Battery Pack. . . . . . . . . . . . . . . . . . . . 4–14
Storing a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . 4–16
Battery Conservation Settings and Procedures . . . . 4–17
Replacing a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . 4–18
Recycling or Disposing of a Used Battery Pack . . . . . . 4–19
Startup and Reference Guide—Part 2
4–1
HP-323140-001.book Page 2 Tuesday, April 1, 2003 4:20 PM
Power
Understanding Standby, Hibernation
and Shutdown
This section describes Standby, Hibernation, and shutdown and
explains when to implement them. Standby, Hibernation, and
shutdown procedures are provided later in the chapter. Standby
and Hibernation are energy-saving features that can be initiated
by you or by the system.
Standby
Standby reduces power to system components that are not in use.
When Standby is initiated, your work is saved in random access
memory (RAM) and the screen is cleared.
■
Saving your work before initiating Standby is not usually
necessary, but is a recommended precaution.
■
When the notebook is in Standby, the power/standby light
flashes.
When you resume from Standby, your work returns to the screen
where you left off.
Hibernation
Hibernation saves system memory to the hard drive, takes a
snapshot of the notebook image, then shuts down the notebook.
When you resume from Hibernation, your work returns to the
screen exactly as you left it.
The following information may be useful as you manage
Hibernation:
■
4–2
Saving your work before initiating Hibernation is not usually
necessary, but is a recommended precaution.
Startup and Reference Guide—Part 2
HP-323140-001.book Page 3 Tuesday, April 1, 2003 4:20 PM
Power
■
■
To determine whether the notebook is in Hibernation or
turned off, press the power button:
❏
If the notebook is in Hibernation, your work returns to
the screen.
❏
If the notebook is off, Windows loads.
Hibernation is enabled by default, but can be disabled. To
prevent loss of work during a critical low-battery condition,
disable Hibernation only during a battery pack calibration.
To verify that Hibernation is enabled, select Start > Control
Panel > Performance and Maintenance > Power Options
icon > Hibernate tab. If Hibernation is enabled, the Enable
Hibernation check box is selected.
Ä
CAUTION: If the configuration of the notebook system is changed during
Hibernation, it may not be possible to resume from Hibernation. When the
notebook is in Hibernation:
■
■
■
Do not add or remove a memory module.
Do not connect or disconnect an external device.
Do not insert or remove a CD, DVD, PC Card, SD Card, or MMC.
Shutdown
Shutdown procedures turn off the notebook. Whether to leave
a battery pack in the notebook or in storage depends on how
you work:
■
Leaving the battery pack in the notebook enables the battery
pack to charge whenever the notebook is connected to
external power and also protects your work during a power
outage.
■
A battery pack in the notebook discharges more quickly, even
when the notebook is turned off, than a battery pack that has
been removed from the notebook and stored in a cool, dry
location.
Startup and Reference Guide—Part 2
4–3
HP-323140-001.book Page 4 Tuesday, April 1, 2003 4:20 PM
Power
Choosing Standby, Hibernation or
Shutdown
If you plan to resume shortly: Initiate Standby for shorter times
and Hibernation for longer times or power conservation.
The amount of time a battery pack can support Standby or
Hibernation or hold a charge varies by notebook configuration
and the condition of the battery pack.
■
Initiating Standby clears the screen, uses less power than
leaving the notebook on, and your work returns quickly to the
screen when you resume from Standby. A fully charged new
battery pack can typically support Standby for up to 48 hours.
■
Initiating Hibernation clears the screen and uses much less
power than Standby. Returning to work saved in Hibernation
takes longer than returning to work saved in Standby, but is
faster than returning to your place manually after restarting
the notebook. A fully charged new battery pack can typically
support Hibernation for several weeks.
If you plan to resume within 2 weeks: Shut down the notebook. If
possible, connect the notebook to external power to keep an
inserted battery pack fully charged.
If the notebook will be disconnected from external power for more
than 2 weeks: To extend the life of an inserted battery pack, shut
down the notebook. Remove the battery pack and store it in a
cool, dry location.
If an external power supply is uncertain, for example, because of
an electrical storm, save your work, then initiate Hibernation or
shut down the notebook.
4–4
Startup and Reference Guide—Part 2
HP-323140-001.book Page 5 Tuesday, April 1, 2003 4:20 PM
Power
Using Standby, Hibernation and
Shutdown Procedures
This section explains the default Standby, Hibernation, and
shutdown procedures and includes information about turning the
display on or off.
Identifying Power Controls and Indicators
Standby, Hibernation, shutdown, and display procedures use the
following controls and indicators:
1 Power button
3 Fn+F5 hotkeys (to initiate Standby)
2 Display switch
4 Power/standby light
Identifying Standby, Hibernation, shutdown, and display controls
and indicators
Startup and Reference Guide—Part 2
4–5
HP-323140-001.book Page 6 Tuesday, April 1, 2003 4:20 PM
Power
Turning the Notebook or Display On or Off
Task
Procedure
Results
Turn on the
notebook.
Press the power button.
■ Power/standby light
✎
■ Operating system loads.
Shut down the
notebook.*
turns on.
Pressing the
power button
turns on the
notebook from
Standby,
Hibernation, or
shutdown.
Select Start > Turn Off
Computer > Turn Off.
■ Power/standby light
turns off.
■ Operating system
shuts down.
■ Notebook turns off.
Turn off the display
when the notebook
is closed.
Close the notebook.
When the notebook is
closed, the display presses
the display switch, which
then turns off the display.
*If the system is unresponsive, and you are unable to shut down the notebook
with this procedure, see “Using Emergency Shutdown Procedures” next in this
section.
Using Emergency Shutdown Procedures
If the notebook does not respond to the Windows shutdown
procedure (Start > Turn Off Computer > Turn Off), try the
following emergency shutdown procedures in the sequence
provided:
4–6
■
If the notebook is running Windows XP Professional: Press
ctrl+alt+delete. Select the Shut Down button, then select Shut
down from the drop down list.
■
Press and hold down the power button for at least 4 seconds.
■
Unplug the notebook from external power and remove the
battery pack. For battery pack removal instructions see the
“Replacing a Battery Pack” section, later in this chapter.
Startup and Reference Guide—Part 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:07:23 16:56:42-07:00
Create Date                     : 2003:07:23 16:56:23-07:00
Title                           : startup and reference guide
Author                          : Hewlett-Packard Development Company, L.P.
Creator                         : FrameMaker 6.0
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 50
Mod Date                        : 2003:07:23 16:56:42-07:00
Creation Date                   : 2003:07:23 16:56:23-07:00
Metadata Date                   : 2003:07:23 16:56:42-07:00

EXIF Metadata provided by EXIF.tools