Broadcom BRCM1007 Dual-band WLAN Mini PCI card User Manual User guide

Broadcom Corporation Dual-band WLAN Mini PCI card User guide

UserManual.wiki >

BRCM1007 User Manual >

Contents

User guide

Introduction: Dell TrueMobile 1400 WLAN Card User's GuideBack to topBack to ContentsPlease read copyright and trademark information.file:///D|/My%20Documents/1400/intro.htm (2 of 2) [11/15/2002 8:25:15 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. Click OK in the Wireless Network Properties box. 3. Click Apply in the Dell TrueMobile 1400 Internal Dual-band WAN Card Utility box. The network name and icon appear at the top of the Preferred networks list. 4. Click Refresh to activate the network connection (wait up to one minute for the network connection to be made). Your computer is connected to the selected network when you see a blue bubble on top of the icon for that network. If the bubble does not appear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (3 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. Select the Data encryption (WEP enabled) box.3. Clear the The key is provided for me automatically box.4. Type the network key in the Network key box. NOTE—You do not need to select the Key format or the Key length before typing the network key. These settings automatically change to the appropriate setting as you type the network key.5. Click OK. file:///D|/My%20Documents/1400/setup.htm (5 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide6. The network name and icon appear at the top of the Preferred networks list. Click Refresh to activate the network connection (wait up to one minute for the network connection to be made). Your computer is connected to the selected network when you see a blue bubble on top of the icon for that network. If the bubble does not appear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (6 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. Type the network name in the Network name (SSID) box.3. Click OK. file:///D|/My%20Documents/1400/setup.htm (8 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide4. The network name and icon appear at the top of the Preferred networks list. Click Refresh to activate the network connection (wait up to one minute for the network connection to be made).Your computer is connected to the added network when you see a blue bubble on top of the icon for that network. If the bubble does not appear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (9 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. Type the network name in the Network name (SSID) box.3. Select the Data encryption (WEP enabled) box.4. Clear the The key is provided for me automatically box.5. Type the network key in the Network key box. NOTE—You do not need to select the Key format or the Key length before typing the network key. These settings automatically change to the appropriate setting as you type the network key.6. Click OK. file:///D|/My%20Documents/1400/setup.htm (11 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide7. The network name and icon appear at the top of the Preferred networks list. Click Refresh to activate the network connection (wait up to one minute for the network connection to be made).Your computer is connected to the added network when you see a blue bubble on top of the icon for that network. If the bubble does not appear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (12 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. On the Association tab of the Wireless network properties box, select the Data encryption (WEP enabled) box.3. Clear the The key is provided for me automatically box.4. Type the network key in the Network key box and again in the Confirm network key box.5. Click OK. file:///D|/My%20Documents/1400/setup.htm (17 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide6. The network name and icon appear at the top of the Preferred networks list.7. Click OK on the Wireless Networks tab in the Wireless Network Connection 2 Properties box to activate the network connection. To verify that the network connection has been made, reopen theWireless Network Connection 2 Properties box. Your computer is connected to the selected network when you see a blue bubble on top of the icon for that network. If the bubble does not appear, click Refresh. If it still does not apprear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (18 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. Type the network name in the Network name (SSID) box.3. Click OK. file:///D|/My%20Documents/1400/setup.htm (20 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide4. The network name and icon appear at the top of the Preferred networks list.5. Click OK in the Wireless Network Connection 2 Properties box to activate the network connection. To verify that the network connection has been made, reopen the Wireless Network Connection 2 Properties box. Your computer is connected to the selected network when you see a blue bubble on top of the icon for that network. If the bubble does not appear,click Refresh. If it still does not apprear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (21 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide2. Type the network name in the Network name (SSID) box.3. Select the Data encryption (WEP enabled) box.4. Clear the The key is provided for me automatically box.5. Type the network key in the Network key box. NOTE—You do not need to select the Key format or the Key length before typing the network key. These settings automatically change to the appropriate setting as you type the network key.6. Click OK. file:///D|/My%20Documents/1400/setup.htm (23 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide7. The network name and icon appear at the top of the Preferred networks list.8. Click OK in the Wireless Network Connection 2 Properties box to activate the network connection. To verify that the network connection has been made, reopen theWireless Network Connection 2 Properties box. Your computer is connected to the selected network when you see a blue bubble on top of the icon for that network. If the bubble does not appear,click Refresh. If it still does not apprear, try to access a Web page to verify that you are connected to the Internet. file:///D|/My%20Documents/1400/setup.htm (24 of 25) [11/15/2002 9:06:56 AM]

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's GuideBack to topBack to ContentsPlease read copyright and trademark information.file:///D|/My%20Documents/1400/setup.htm (25 of 25) [11/15/2002 9:06:56 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideBack to ContentsUsing the Dell TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideOpening the TreuMobile 1400 Client UtilityAdding a new network to the list of preferred networksViewing the link status of your wireless connectionViewing or modifying the wireless network propertiesSetting up an ad hoc (peer-to-peer) group network for connecting to the InternetAdding an ad hoc networkDisabling the radioDiagnosticsOpening the TrueMobile 1400 Client UtilityThe TrueMobile 1400 Client Utility starts automatically every time you start your computer. When the system startup process is complete, the utility icon appears in the system tray of the Windows® task bar at the bottom right of your screen. The appearance of the utility icon varies, depending on the strength of the signal being received from the associated network. If the utility icon is not in the system tray, you can have it appear by selecting Show wireless configuration icon in systray from the Wireless Networks tab in the Utility box that appears when the utility is open.To open the utility in the Windows® 2000 environment1. From the desktop, click the Start button, point to Settings, and click Control Panel.2. Double-click the TrueMobile 1400 Client Utility icon . file:///D|/My%20Documents/1400/utility.htm (1 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideTo open the utility in the Windows XP environment1. From the desktop, click the Start button and click Control Panel.2. If you are looking at the Category View of Control Panel, click Switch to Classic View. If you are looking at the Classic View of Control Panel, go to the next step.3. Double-click the TrueMobile 1400 Client Utility icon.4. On the Wireless Networks tab, click Open Network Properties. file:///D|/My%20Documents/1400/utility.htm (2 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide5. If the Wireless Networks tab of the Properties box is not on top, click the Wireless Networks tab.6. Verify that the Use Windows to configure my wireless network settings box is selected. If it is not, select it. file:///D|/My%20Documents/1400/utility.htm (3 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideTo view the link status (Windows XP environment)1. Open the TrueMobile 1400 Client Utility. a. From the desktop, click the Start button and click Control Panel.b. If you are looking at the Category View of Control Panel, click Switch to Classic View. If you are looking at the Classic View of Control Panel, go to the next step.c. Double-click the TrueMobile 1400 Client Utility icon.2. Click the Link Status tab in the Utility box. file:///D|/My%20Documents/1400/utility.htm (6 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideThe quality of the connection (signal strength and noise) of the particular network you are connected to is indicated by the horizontal green bars and the decibel level values that are displayed at the bottom of the Link Status tab. The connection quality is also indicated by the appearance of the TrueMobile 1400 Client Utility icon in the desk top system tray. The verbal description of the signal strength appears when you hover the cursor over the icon.The table below shows the quality level and suggested action for improving the signal quality for each icon image that may be displayed. If the signal strength indications are anything other than very good or excellent, you should take the appropriate suggested action.Four vertical green bars indicate that the signal strength is very good or excellent.file:///D|/My%20Documents/1400/utility.htm (7 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideThree vertical green bars indicate that the signal is good.Three vertical yellow bars indicate that the signal strength is low.Suggested action: Move closer to the access point.Two red vertical red bars indicates that the signal strength is very low.Suggested action: Move closer to the access point.Uncolored vertical bars indicate that there is no signal being received.Probable causes: ● The computer is trying to establish an initial connection but has not yet succeeded.● You may have moved out of range of the access point.Suggested action:● Wait● Move closer to the access point.Uncolored vertical bars with a superimposed red letter x indicate that there is no radio connection.Probable cause: The radio is disabled. Suggested action: Enable the radio. To enable the radio, right-click the Dell TrueMobile 1400 Internal Dual-band WLAN Utility icon and click Enable Radio.Viewing or modifying the wireless network propertiesTo view or modify the wireless network properties (Windows 2000 environment)1. Open the TrueMobile 1400 wireless utility. a. From the desktop, click the Start button, point to Settings, and click Control Panel.b. Double-click the TrueMobile 1400 Client Utility icon . 2. If it is not already on top, click the Wireless Networks tab.3. Select the network from the Preferred networks list and click Properties. file:///D|/My%20Documents/1400/utility.htm (8 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide4. From the Wireless Network Properties box, you can enable or disable WEP data encryption and change the network name and network key (see the Completing the setup section for instructions). file:///D|/My%20Documents/1400/utility.htm (9 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideTo view or modify the wireless network properties (Windows XP environment)1. Open the TrueMobile 1400 Client Utility. a. From the desktop, click the Start button and click Control Panel. If you are looking at the Category View of Control Panel, click Switch to Classic View.b. Double-click the TrueMobile 1400 Client Utility icon.2. On the Wireless Networks tab, click Open Network Properties. file:///D|/My%20Documents/1400/utility.htm (10 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide3. If the Wireless Networks tab of the Properties box is not on top, click the Wireless Networks tab.4. Verify that the Use Windows to configure my wireless network settings box is selected. If it is not, select it. file:///D|/My%20Documents/1400/utility.htm (11 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide5. Select the network from the Preferred networks list and click Properties. file:///D|/My%20Documents/1400/utility.htm (12 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide6. From the Properties box, you can enable or disable WEP data encryption and change the network name and the network key (see the Completing the setup section for instructions). Setting up an ad hoc (peer-to-peer) group network for connecting to the InternetTo connect the computers in an ad hoc group network to the Internet, you must install the Windows Internet connection sharing (ICS) component. ICS installation is not required, however, for communication among a group of computers that have a Dell TrueMobile 1400 Internal Dual-band WLAN Card installed in each computer. You must also add an ad hoc network to the Preferred networks list on the Wireless Networks tab of the Network Properties box (see Opening the TrueMobile 1400 Client Utility).Select one of your desktop computers to serve as the host computer (all other computers are called clients). The host computer must be running either the Windows 2000 or Windows XP operating system. The host computer is the only computer that connects directly to the Internet. Dell recommends that the host computer be the desktop computer having the fastest microprocessor and the most memory.file:///D|/My%20Documents/1400/utility.htm (13 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideNOTE—Internet connection sharing requires that the host computer have either a modem or another network adapter in addition to a wireless network adapter. The modem or the additional network adapter is used to access the Internet. Your Dell TrueMobile 1400 Internal Dual-band WLAN Card is used to share the Internet connections with other clients.Setting up Internet connection sharing (ICS) on the host computerTo set up ICS in the Windows XP environment1. Connect the host computer to the Internet.2. From the host computer, click the Start button.3. Click Help and Support.4. Perform a search on Internet Connection Sharing.5. From the Pick a task list, click Enable Internet Connection Sharing on a Network Connection.6. Follow the instructions on the screen to complete setting up ICS.To set up ICS in the Windows 2000 environment1. Connect the host computer to the Internet.2. From the host computer, click the Start button, point to Settings, and click Control Panel.3. Double-click Network and Dial-up Connections.4. If the host computer is connected to the Internet using a dial-up connection, double-click Dial-up Connection, click Properties, click Sharing, and then ensure that both Enabled Internet Connection Sharing for this connection and Enabled on-demand dialing are selected.5. If the host computer is connected to the Internet using a cable or DSL modem, double-click Local Area Connection.6. In the Local Area Connection Status box, click Properties.7. Click the Sharing tab and select Enable Internet Connection Sharing for this connection.8. Click OKAdding an ad hoc networkYou can add an ad hoc network (for peer-to-peer communicating) that either requires a WEP key or does not. Instructions for adding and configuring an ad hoc network for both types of ad hoc networks are provided below:● Adding an ad hoc network that does not require a WEP key (Windows 2000 environment)● Adding an ad hoc network that requires a WEP key (Windows 2000 environment)● Adding an ad hoc network that does not require a WEP key (Windows XP environment)● Adding an ad hoc network that requires a WEP key (Windows XP environment)Adding an ad hoc network that does not require a WEP key (Windows 2000 environment)1. To add an ad hoc network to the Preferred networks list, open the TrueMobile 1400 wireless utility. a. From the desktop, click the Start button, point to Settings, and click Control Panel.b. Double-click the TrueMobile 1400 Wireless Utility icon .2. If the Wireless Networks tab is not already on top, click the Wireless Networks tab.3. Click Add. file:///D|/My%20Documents/1400/utility.htm (14 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide4. Type the network name in the Network name (SSID) box.5. Select the This is a computer-to-computer (ad hoc) network: wireless access points are not used box.6. Click OK. file:///D|/My%20Documents/1400/utility.htm (15 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide7. Click OK on the Dell TrueMobile 1400 Internal Dual-band WLAN Card Utility box to activate the ad hoc network (wait up to 1 minute for the network connection to be made). To verify that your computer is connected to the added network, reopen the Dell TrueMobile 1400 Internal Dual-band WLAN Card Utility and click the Wireless Networks tab. If you see a bubble on top of the icon for the added network, your computer is connected to that network. file:///D|/My%20Documents/1400/utility.htm (16 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideAdding an ad hoc network that requires a WEP key (Windows 2000 environment)1. To add an ad hoc network to the Preferred networks list, open the TrueMobile 1180 wireless utility. a. From the desktop, click the Start button, point to Settings, and click Control Panel.b. Double-click the TrueMobile 1180 Wireless Utility icon .2. If the Wireless Networks tab is not already on top, click the Wireless Networks tab.3. Click Add. file:///D|/My%20Documents/1400/utility.htm (17 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide4. Type the network name in the Network name (SSID) box.5. Select the Data encryption (WEP enabled) box.6. Clear the The key is provided for me automatically box.7. Type the network key in the Network key box. NOTE—You do not need to select the Key format or the Key length before typing the network key. These settings automatically change to the appropriate setting as you type the network key.8. Select the This is a computer-to-computer (ad hoc) network: wireless access points are not used box.9. Click OK. file:///D|/My%20Documents/1400/utility.htm (18 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide10. Wait up to one minute for the network connection to be made. Your computer is connected to the added network when you see a blue bubble on top of the icon for that network. file:///D|/My%20Documents/1400/utility.htm (19 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideAdding an ad hoc network that does not require a WEP key (Windows XP environment)1. To add an ad hoc network to the Preferred networks list, open the TrueMobile 1400 Client Utility. a. From the desktop, click the Start button and click Control Panel. If you are looking at the Category View of Control Panel, click Switch to Classic View.b. Double-click the TrueMobile 1400 Client Utility icon.c. On the Wireless Networks tab, click Open Network Properties. file:///D|/My%20Documents/1400/utility.htm (20 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide2. If the Wireless Networks tab is not already on top, click the Wireless Networks tab.3. Verify that the Use Windows to configure my wireless network settings box is selected. If it is not, select it.4. Click Add. file:///D|/My%20Documents/1400/utility.htm (21 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide5. Type the network name in the Network name (SSID) box.6. Select the This is a computer-to-computer (ad hoc) network; wireless access points are not used box. Clear the Data encryption (WEP enabled) and the The Key is provided for me automatically boxes if they are selected.7. Click OK. file:///D|/My%20Documents/1400/utility.htm (22 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide8. On the Wireless Networks tab of the connection Properties box, click Advanced, select Computer-to-computer (ad hoc) networks only, and click Close. 9. Click OK. The ad hoc network you added appears at the top of the Preferred networks list. file:///D|/My%20Documents/1400/utility.htm (23 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide10. Reopen the Network Properties box and click the Wireless Networks tab. Your computer is connected to the added network when you see a blue bubble on top of the icon for your ad hoc network. file:///D|/My%20Documents/1400/utility.htm (24 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideAdding an ad hoc network that requires a WEP key (Windows XP environment)1. To add an ad hoc network to the Preferred networks list, open the TrueMobile 1400 Client Utility. a. From the desktop, click the Start button and click Control Panel. If you are looking at the Category View of Control Panel, click Switch to Classic View.b. Double-click the TrueMobile 1400 Client Utility icon.c. On the Wireless Networks tab, click Open Network Properties. file:///D|/My%20Documents/1400/utility.htm (25 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide2. If the Wireless Networks tab is not already on top, click the Wireless Networks tab.3. Verify that the Use Windows to configure my wireless network settings box is selected. If it is not, select it.4. Click Add. file:///D|/My%20Documents/1400/utility.htm (26 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide5. On the Association tab of the Wireless network properties box, select the Data encryption (WEP enabled) box.6. Type the network name in the Network name (SSID) box.7. Clear the The key is provided for me automatically box.8. Type the network key in the Network key box and again in the Confirm network key box.9. Select the This is a computer-to-computer (ad hoc) network; wireless access points are not used box.10. Click OK. file:///D|/My%20Documents/1400/utility.htm (27 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide11. On the Wireless Networks tab of the connection Properties box, click Advanced, select Computer-to-computer (ad hoc) networks only, and click Close. file:///D|/My%20Documents/1400/utility.htm (28 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide12. Click OK. The ad hoc network you added appears at the top of the Preferred networks list. 13. Reopen the Network Properties box and click the Wireless Networks tab. Your computer is connected to the added network when you see a blue bubble on top of the icon for your ad hoc network. file:///D|/My%20Documents/1400/utility.htm (29 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideDisabling the radioTo disable the radio on your Dell TrueMobile 1400 Internal Dual-band WLAN Card, right-click the TrueMobile 1400 Client Utility icon in the system tray and click Disable Radio. To enable the radio, right-click the TrueMobile 1400 Client Utility icon and click Enable Radio.Diagnosticsfile:///D|/My%20Documents/1400/utility.htm (30 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideYou can run a number of diagnostics on your Dell TrueMobile 1400 Internal Dual-band WLAN Card to verify its operational and functional status. NOTE—Your network connection is lost when you run the diagnostics. When the test run is over, your network connection is automatically reestablished.Diagnostics (Windows 2000 environment)1. To begin running the diagnostics, open the TrueMobile 1400 Client Utility. a. From the desktop, click the Start button, point to Settings, and click Control Panel.b. Double-click the TrueMobile 1400 Client Utility icon .2. Click the Diagnostics tab.3. To see a description of the test, click each test and look in the Status area.4. All tests are selected by default. To run an individual test or some but not all of the tests, clear the check box for those tests that you do not want to run.5. Click Run. 6. If your Dell TrueMobile 1400 Internal Dual-band WLAN Card fails any of the diagnostics tests, see the Troubleshooting section.file:///D|/My%20Documents/1400/utility.htm (31 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideDiagnostics (Windows XP environment)1. To begin running the diagnostics, open the TrueMobile 1400 Client Utility. a. From the desktop, click the Start button and click Control Panel. If you are looking at the Category View of Control Panel, click Switch to Classic View.b. Double-click the TrueMobile 1400 Client Utility icon .2. Click the Diagnostics tab.3. To see a description of the test, click each test and look in the Status area.4. All tests are selected by default. To run an individual test or some but not all of the tests, clear the check box for those tests that you do not want to run.5. Click Run Tests. 6. If your Dell TrueMobile 1400 Internal Dual-band WLAN Card fails any of the diagnostics tests, see the Troubleshooting section.file:///D|/My%20Documents/1400/utility.htm (32 of 33) [11/15/2002 9:07:53 AM]

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's GuideBack to topBack to ContentsPlease read copyright and trademark information.file:///D|/My%20Documents/1400/utility.htm (33 of 33) [11/15/2002 9:07:53 AM]

Specifications: Dell TrueMobile 1400 WLAN Card User's GuideBack to Contents Specifications: Dell™ TrueMobile™ 1400 WLAN Card User's GuidePhysical characteristicsTemperature and humidity limitationsPower characteristicsNetworking characteristicsRadio characteristicsPhysical characteristicsForm factor Mini PCI specification, May 2002. Type IIIA form factorDimensions (length, width) 59.75×50.95 mmTemperature and humidity limitationsOperating 0 to 85°C 95% maximum (no condensation allowed)Storage –20 to 85°C 95% maximum (no condensation allowed)Power characteristicsDoze mode 100 mAReceive mode 220 mATransmit mode 330 mAPower supply 3.3 VNetworking characteristicsCompatibility IEEE 802.11 standard for wireless LANs (DSSS)Network operating system Microsoft® Windows® Networkingfile:///D|/My%20Documents/1400/specs.htm (1 of 3) [11/15/2002 9:09:49 AM]

Specifications: Dell TrueMobile 1400 WLAN Card User's GuideHost operating system Microsoft® Windows® XP, 2000● NDIS5 miniport driverMedia access protocol CSMA/CA (collision avoidance) with acknowledgment (ACK)Data rate High 11 MbpsMedium 5.5 MbpsStandard 2 MbpsLow 1 MbpsNOTE—The Dell TrueMobile 1400 internal WLAN card uses an automatic transmit rate select mechanismRadio characteristicsTable 1. RF (radio frequency) band: 2.4 GHz (2400–2500 MHz)Modulation technique Direct sequence spread spectrum● CCK for high and medium transmit rate● DQPSK for standard transmit rate● DBPSK for low transmit rateSpreading 11-Chip Barker sequenceBit error rate (BER) Better than 10–5Nominal output power 15 dBmTable 2. Range at various transmission ratesTransmission rate High speed(11 Mbps) Medium speed(5.5 Mbps) Standard speed(2 Mbps) Low speed(1 Mbps)Open office environment range 207 m(683 ft) 297 m(980 ft) 400 m(1300 ft) 550 m(1750 ft)Semi-open office environment range 59 m(194 ft) 74 m(244 ft) 90 m(300 ft) 115 m(375 ft)Closed office environment range 29 m(96 ft) 36 m(119 ft) 40 m(130 ft) 50 m(165 ft)Receiver sensitivity –85 dBm –88 dBm –91 dBm –94 dBmDelay spread (at FER of <1%) ›250 ns ›300 ns 400 ns 500 nsfile:///D|/My%20Documents/1400/specs.htm (2 of 3) [11/15/2002 9:09:49 AM]

Specifications: Dell TrueMobile 1400 WLAN Card User's GuideNOTES1—The range of your wireless devices can be affected when the antennas are placed near metal surfaces and solid high-density materials.2—Range is also affected by obstacles in the signal path (of the radio) that may either absorb or reflect the radio signal.3—In open office environments, the absence of physical obstructions between antennas improves the range because there is a clear line-of-sight.4—A semi-open office environment is one in which the work area is divided by short walls that are above the level of the desk top; antennas are at desk top level.5—A closed office environment is one in which the work areas are separated by floor-to-ceiling walls.Back to topBack to ContentsPlease read copyright and trademark information.file:///D|/My%20Documents/1400/specs.htm (3 of 3) [11/15/2002 9:09:49 AM]

Troubleshooting: Dell TrueMobile 1400 WLAN Card User's GuideBack to Contents Troubleshooting: Dell TrueMobile 1400 WLAN Card User's GuideCannot connect to the networkPerformance and connectivity problemsGetting helpCannot connect to the networkIf your Dell TrueMobile 1400 Internal Dual-band WLAN Card appears to be functioning properly but you cannot connect to the network, the problem may be that there is a mismatch between the Network name (SSID) and Wireless network key (WEP) settings in your Wireless Network Properties and the name and WEP key of the network you are trying to connect to. As explained in Completing the setup, the network name and WEP key are case sensitive. Verify that the spelling and case of these parameters are correct and that the settings are exactly the same on all computers on the network.If you have verified that the spelling and case of these parameters are correct and that the settings are exactly the same on all computers on the network and you are still unable to connect to the network, see Performance and connectivity problems. Performance and connectivity problemsProblem or symptom Possible solutionThe computers seem to be communicating, but they do not appear in the My Computer window or in the My Network Places window.Windows 2000 environment Windows XP environmentVerify that File and Printer Sharing is enabled on all the computers on your network. 1. From the desktop, click the Start button, point to Settings, and click Control Panel. 2. In Control Panel, double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window, double-click the Local Area Connection icon.4. In the Local Area Connection Status box, click Properties.5. In the Local Area Connection Properties box, verify that the File and Printer Sharing for Microsoft Networks check box is selected. If the check box is cleared, select it. If the check box is not present, click Install. Verify that File and Printer Sharing is enabled on all the computers on your network.1. From the desktop, click the Start button and click Control Panel (if you are looking at Category View, slick Switch to Classic View). 2. In Control Panel, double-click the Network Connections icon. 3. In the LAN or High-Speed Internet area, right-click Wireless Network Connection and click Properties.4. In the Wireless Network Connection Properties box, if the General tab is not on top, click the General tab.5. In the This connection uses the following items list, verify that the File and Printer Sharing for Microsoft Networks check box is selected. If the check box is cleared, file:///D|/My%20Documents/1400/trouble.htm (1 of 3) [11/15/2002 9:10:29 AM]

Troubleshooting: Dell TrueMobile 1400 WLAN Card User's GuideIn the Select Network Component Type box, select Service and click Add. In the Select Network Service box, select File and Printer Sharing for Microsoft Networks and click OK. Close the Local Area Connection Properties box.6. Close the Local Area Connection Status box. 7. Close the Network and Dial-up Connections window.select it. If this item is not present, click Install. In the Select Network Component Type box, select Service and click Add. In the Select Network Service box, select File and Printer Sharing for Microsoft Networks and click OK. Close the Wireless Network Connection Properties box.6. Close the Network Connections window.Data transfer is sometimes very slow. Microwave ovens and some cordless phones operate at the same radio frequency as the Dell TrueMobile 1400 Internal Dual-band Cards. When the microwave oven or cordless phone is in use, it interferes with the wireless network. Therefore, keep computers having the Dell TrueMobile 1400 Internal Dual-band Cards at least 20 feet away from your microwave oven and any cordless telephone that operates at a frequency of 2.4 GHz.Data transfer is always very slow. Some homes and most offices are steel-framed structures. The steel in such buildings may interfere with your network's radio signals, thus causing a slowdown in the data transmission rate. Try moving your computers to different locations in the building to see if performance improves.Computers are not communicating with the network.If your network has an AP1100 access point, check all cables and make sure the power LED on the front of the AP1100 is green.In Microsoft® Windows® 2000, I get the following error message: Medium cable disconnected. Also, there is a red X on my network icon in the system tray. This indicates that your computer is not properly configured to connect to the network. Verify that all of the wireless network properties settings are correct (see Viewing or modifying the wireless network properties). Also, make sure that your computer is receiving a good signal from the access point. See Viewing the link status of your wireless connection.Network performance is really slow when the system is docked to a docking station that has an active Ethernet port. NOTE—For Windows 2000 only.This condition occurs if you dock your system into a docking station that has an active Ethernet port while your Dell TrueMobile 1180 internal Mini PCI card is still active and connected to an access point. This happens because Windows 2000 must now handle two active network connections. You need to either disconnect the Ethernet cable from your docking station, or disable the radio on your Mini PCI Card. To disable the radio on your Mini PCI Card, right click on the Dell TrueMobile 1180 utility icon icon in the system tray and click Disable Radio. NOTE—The radio is not automatically enabled when you computer next starts. To enable the radio, right-click on the Dell TrueMobile 1180 wireless utility icon and click Enable Radio.Getting helpTechnical support is available online from Dell at http://support.dell.comBack to topBack to Contentsfile:///D|/My%20Documents/1400/trouble.htm (2 of 3) [11/15/2002 9:10:29 AM]

Troubleshooting: Dell TrueMobile 1400 WLAN Card User's GuidePlease read copyright and trademark information.file:///D|/My%20Documents/1400/trouble.htm (3 of 3) [11/15/2002 9:10:29 AM]

Regulatory Information: Dell TrueMobile WLAN Card User's GuideBack to ContentsRegulatory Information: Dell™ TrueMobile™ WLAN Card User's GuideInformation for the userRegulatory informationInformation for the userWireless interoperabilityThe Dell™ TrueMobile™ WLAN Card products are designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM) radio technology and to comply with the following standards:● IEEE Std. 802.11b-1999. Standard on 2.4 GHz Wireless LAN.● IEEE Std. 802.11a-1999. Standard on 5 GHz Wireless LANThe Dell TrueMobile WLAN Cards and your healthThe Dell™ TrueMobile™ WLAN Cards, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by these devices, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The Dell TrueMobile WLAN Card devices operate within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of a Dell TrueMobile WLAN Card wireless device may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations include the following:● Using the Dell TrueMobile WLAN Card equipment onboard airplanes, or● Using the Dell TrueMobile WLAN Card equipment in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful.If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the Dell TrueMobile WLAN Card device before you turn it on.file:///P|/User%20Manuals/1400/regs.htm (1 of 7) [12/12/02 1:06:45 PM]

Regulatory Information: Dell TrueMobile WLAN Card User's GuideRegulatory information Canada—Industry Canada (IC)These devices comply with RSS210 of Industry Canada.Europe—EU Declaration of ConformityThis equipment complies with the essential requirements of the European Union directive 1999/5/EC.Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE.Die Geräte erfüllen die grundlegenden Anforderungen der RTTE-Richtlinie 1999/5/EG.Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea R&TTE 1999/5/CE.Este equipo cumple los requisitos principales de la Directiva 1999/5/CE de la UE, "Equipos de Terminales de Radio y Telecomunicaciones".Este equipamento cumpre os requisitos essenciais da Directiva 1999/5/CE do Parlamento Europeu e do Conselho (Directiva RTT).O exoplismos autos plhroi tis basikes apaits ths koinotikhs odhgias EU R&TTE 1999/5/E.Deze apparatuur voldoet aan de noodzakelijke vereisten van EU-richtlijn betreffende radioapparatuur en telecommunicatie-eindapparatuur 1999/5/EG.Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og teleterminaludstyr.Dette utstyret er i overensstemmelse med hovedkravene i R&TTE-direktivet (1999/5/EC) fra EU.Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE).file:///P|/User%20Manuals/1400/regs.htm (2 of 7) [12/12/02 1:06:45 PM]

Regulatory Information: Dell TrueMobile WLAN Card User's GuideTämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia.This product is intended to be used in all countries of the European Economic Area when operating in IEEE 802.11b mode at 2.4 GHz (see France below). When operating in the IEEE 802.11a mode at 5 GHz, however, the product is restricted further. Refer to Dell's Web site (www.dell.com) for full information.FranceSome areas of France have a restricted frequency band for operation in the IEEE 802.11b mode at 2.4 GHz. The following information describes this restriction (please check ART's Web site (http://www.art-telecom.fr) for more up-to-date information). Autorité de régulation des télecommunications (ART) has made decisions that will allow users to install WLAN ( wireless LAN) systems to provide high-speed Internet services primarily in high-traffic areas (called hot spots). ART recently released guidelines that establish the conditions for experimenting with the installation of public WLANs, such as for high-speed Internet access in locations that are currently being poorly served by existing networks. Such public WLANs would operate in the 2.4 GHz frequency band. This series of measures answers many of the concerns expressed during ART's public consultation on this topic.Decisions allowing the installation of wireless terminals in hot spots (train stations, airports, business centers, and the like): In agreement with the Ministry of Defence, ART has made two decisions setting the conditions for using wireless LANs in the 2.4 GHz band. One of these decisions has been submitted to the Minister of Telecommunications for approval. These decisions will allow the installation of WLAN access points to provide public services in high-traffic public places. This will allow service providers and licensed operators to install access points using 2.4 GHz band technologies without authorisation, under the following technical conditions:1. In 38 départements (see Metropolitan départements for listing):● The 2400–2454 MHz band can be used both indoors and outdoors using systems (access points and devices) with less than 300 milliwatts (mW) of power.● The 2454–2483.5 MHz band can be used indoors using devices with less than 100 mW of power and can be used outdoors using devices with less than 10 mW of power. When the devices are being used outdoors on private property, the power may be increased to 100 mW after approval from the Ministry of Defence.2. For the time being, in all other metropolitan départements, the conditions remain unchanged. The list of the first 38 départements will be progressively added to after 1 January 2003. 3. For the overseas départements (DOM), as well as Saint Pierre and Miquelon and Mayotte, the entire 2400–2483.5 MHz band may be used indoors and outdoors using devices with less than 100 mW of power, except for the Reunion Islands and Guyana, where the 2420–2483.5 MHz band may be used only outdoors using devices with less than 100 mW of power. ART reminds operators that these frequencies are used with no guarantee of nondisruption, and that the installations must respect all measures applying to radio installations (such as urban planning regulations). These decisions also allow the development of private uses. In particular, private networks (such as indoor corporate networks) can be established using these technologies.These conditions are tablulated below in Table of authorised EIRP.Guidelines for public WLAN experimentation● Networks using WLAN technology will be granted a free authorisation for up to 18 months under article L.33-1 of the Post and Telecommunications Code. These networks may use systems with 100 mW of power (effective isotropic radiated power (EIRP)) on the entire band, indoors and outdoors. Moreover, in the 2.4 GHz band (and file:///P|/User%20Manuals/1400/regs.htm (3 of 7) [12/12/02 1:06:45 PM]

Regulatory Information: Dell TrueMobile WLAN Card User's Guideproviding this power limit is respected), fixed point-to-point links can be established for these networks needs, or frequencies can be requested in other ad hoc bands. ● Private and public persons may submit applications to ART, provided that legislation and regulations allow them to do so.● Applications will be processed in a simplified way, in the spirit of the new "Authorisation" Directive.● ART will send completed applications to the Ministry of Defence. The Ministry will then check that the projects are not located near any sensitive area and that they are not likely to cause disruptions to military equipment. For each application, ART will then submit its report and the draft authorisation to the Minister of Telecommunications.● Applications can be sent from 12 November 2002 so that the first experiments may be launched as soon as early 2003. Full reviews are to be sent to ART at the end of the temporary authorisations to determine whether the technology guarantees quality and security to users. Metropolitan departmentsThe 38 metropolitan départements in which WLAN systems using less than 100 mW of power (EIRP) indoors across the entire 2400–2483.5 MHz band and outdoors on the 2400–2454 MHz band is permitted:01 Ain Orientales 36 Indre 66 Pyrénées02 Aisne 37 Indre et Loire 67 Bas Rhin03 Allier 41 Loir et Cher 68 Haut Rhin05 Hautes Alpes 42 Loire 70 Haute Saône08 Ardennes 45 Loiret 71 Saône et Loire09 Ariège 50 Manche 75 Paris11 Aude 55 Meuse 82 Tarn et Garonne12 Aveyron 58 Nièvre 84 Vaucluse16 Charente 59 Nord 88 Vosges24 Dordogne 60 Oise 89 Yonne25 Doubs 61 Orne 90 Territoire de Belfort26 Drôme 63 Puy du Dôme 94 Val de Marne32 Gers 64 Pyrénées Atlantique Conditions of use for WLANs in hot spots in these 38 départements: ● The 2400–2454 MHz band may be used both indoors and outdoors using devices with power (EIRP) of less than 100 milliwatts (mW).● The 2454–2483.5 MHz band may be used indoors using devices with power (EIRP) of less than 100 mW and outdoors using devices with power of less than 10 mW. On private property outdoors, the power may be 100 mW with the approval of the Minister of Defence. Conditions of use for WLANs in hot spots in other metropolitan départements: The conditions of use currently remain unchanged, that is, ● The 2400–2446.5 MHz band may be used indoors using devices with power (EIRP) of less than 10 mW.● The 2446.5–2483.5 MHz band may be used indoors using devices with power (EIRP) of less than 100 mW. On file:///P|/User%20Manuals/1400/regs.htm (4 of 7) [12/12/02 1:06:45 PM]

Regulatory Information: Dell TrueMobile WLAN Card User's Guideprivate property outdoors, the power may be 100 mW with the approval of the Minister of Defence.Table of authorised EIRPIn the 38 départementsFrequency (MHz)Authorized EIRP (mW)Indoors Outdoors: decisions (Concernent les réseaux indépendants et les hot spots) Outdoors: guidelines(Concernent les éxperimentations de réseaux ouverts au public) 2400100100 10024542483.5 10 and 100 on private property with Ministry of Defence approval 100 with Ministry of Defence approvalIn other metropolitan départementsFrequency (MHz)Authorized EIRP (mW)Indoors Outdoors: decisions (Concernent les réseaux indépendants et les hot spots) Outdoors: guidelines(Concernent les éxperimentations de réseaux ouverts au public) 2400 10 Not permitted100 with Ministry of Defence approval2446.52483.5 100 100 on private property with Ministry of Defence approvalIn Guadeloupe, Martinique, St. Pierre, and Miquelon and MayotteFrequency (MHz) Authorized EIRP (mW)Indoors Outdoors: decisions and guidelines2400 100 1002483.5In Reunion Islands and GuyanaFrequency (MHz)Authorized EIRP (mW)IndoorsOutdoors: decisions(Concernent les réseaux indépendants et les hot spots) Outdoors: guidelines(Concernent les éxperimentations de réseaux ouverts au public)2400100 Not permitted 100 with Ministry of Defence approval2420file:///P|/User%20Manuals/1400/regs.htm (5 of 7) [12/12/02 1:06:45 PM]

Regulatory Information: Dell TrueMobile WLAN Card User's Guide2483.5 100 100NOTE—Your Dell TrueMobile WLAN Card transmits less than 100 mW of power, but more than 10 mW.USA—Federal Communications Commission (FCC)These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject to the following two conditions:● The devices may not cause harmful interference.● The devices must accept any interference that may cause undesired operation.NOTE—The radiated output power of the Dell TrueMobile WLAN Card devices is far below the FCC radio frequency exposure limits. Nevertheless, the Dell TrueMobile WLAN Card devices should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 2.5 cm (1 inch) between you (or any other person in the vicinity) and the antenna that is built into the computer. To determine the location of the antenna within your computer, check the information posted on the general Dell support site at support.dell.com.Interference statementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the instructions, the equipment may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:● Reorient or relocate the receiving antenna.● Increase the distance between the equipment and the receiver.● Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help.NOTE—This Dell TrueMobile WLAN Card device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Dell could void the user's authority to operate the equipment.Radio approvalsTo determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed on the radio approval list posted on the general Dell support site at support.dell.com.Back to the topfile:///P|/User%20Manuals/1400/regs.htm (6 of 7) [12/12/02 1:06:45 PM]

Regulatory Information: Dell TrueMobile WLAN Card User's GuideBack to ContentsPlease read copyright and trademark information.file:///P|/User%20Manuals/1400/regs.htm (7 of 7) [12/12/02 1:06:45 PM]

Glossary: Dell TrueMobile 1400 WLAN Card User's GuideBack to ContentsGlossary: Dell™ TrueMobile™ 1400 WLAN Card User's Guideaccess point A stand-alone wireless hub that allows any computer that has a wireless network adapter to communicate with another computer and to connect to the Internet.available network One of the networks listed in the Available networks list on the Wireless Networks tab of the Wireless Configuration box that appears when the TrueMobile 1400 wireless utility is open. Any wireless network that is broadcasting and is within receiving range of the Dell TrueMobile 1400 internal WLAN card appears on the list.BER Bit error rate. The ratio of errors to the total number of bits being sent in a data transmission from one location to another.client computer The computer that gets its Internet connection by sharing either the host computer's connection or the access point's connection.dBm A unit of expression of power level in decibels with reference to a power of 1 milliwatt.DBPSK differential-binary-phase-shift keying.DQPSK differential-quadrature-phase-shift keying. A compression technique that transmits only the differences between the values of the phase of the sine wave rather than the full absolute value.DSSS direct sequence spread spectrum. A type of radio technology.Dynamic Host Configuration Protocol (DHCP) A mechanism for allocating IP addresses dynamically so that addresses can be reused when hosts no longer need them.file and printer sharing A capability that allows a number of people to view, modify, and print the same file(s) from different computers.GHz gigahertz. A unit of frequency equal to 1 000 000 000 cycles per second.host computer The computer that is directly connected to the Internet via a modem or network adapter.IEEE Institute of Electrical and Electronics EngineeringInternet Protocol (IP) address The address of a computer that is attached to a network. Part of the address designates which network the computer is on, and the other part represents the host identification.LAN local area networkm meterMHz megahertz. A unit of frequency equal to 1 000 000 cycles per second.Mbps megabits per second. Transmission speed of 1 000 000 bits per second.ns nanosecond. 1 billionth (1/1 000 000 000) of a second.peer-to-peer network A communication configuration in which every computer has the same capabilities and any computer can initiate a communication session.preferred network One of the networks that you have configured. Such networks appear in the Preferred networks list on the Wireless Networks tab of the Wireless Configuration box when the TrueMobile 1400 wireless utility is open.file:///D|/My%20Documents/1400/glossary.htm (1 of 2) [11/15/2002 9:11:13 AM]

Glossary: Dell TrueMobile 1400 WLAN Card User's GuideService Set Identifier (SSID) A value that controls access to a wireless network. The SSID for your wireless network card must match the SSID for any access point that you want to connect with. If the value does not match, you are not granted access to the network. You can have up to three SSIDs. Each SSID can be up to 32 characters long and is case-sensitive.Wired Equivalent Privacy (WEP) A form of data encryption. You must set the WEP key information in the client to match the WEP key used by the access point. The WEP key can be enabled or disabled. The WEP key is case-sensitive.Back to topBack to ContentsPlease read copyright and trademark informationfile:///D|/My%20Documents/1400/glossary.htm (2 of 2) [11/15/2002 9:11:13 AM]

Navigation menu