Broadcom BRCM1014 Broadcom 802.11a/g Mini PCI Card User Manual Notebook 367426 xx1

Broadcom Corporation Broadcom 802.11a/g Mini PCI Card Notebook 367426 xx1

CRN 27775 Tablet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	480155
Application ID	CsEdk0wtxInTIkjVG8n0cg==
Document Description	CRN 27775 Tablet User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.03kB (1275339 bits)
Date Submitted	2004-10-19 00:00:00
Date Available	2005-01-07 00:00:00
Creation Date	2004-08-25 12:43:30
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-08-25 12:43:30
Document Title	Notebook User Manual 367426-xx1.PDF
Document Creator	PScript5.dll Version 5.2
Document Author:	MKuo

DRAFT Revised: 8/24/04
File: Title.fm
PN: HP-367426-001
Hardware and Software
Guide
HP Tablet PC Series
Document Part Number: 367426-001
December 2004
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Notice-Front.fm
PN: HP-367186-001
© 2004 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation. SD Logo is a trademark of its proprietor. Bluetooth is a
trademark owned by its proprietor and used by Hewlett-Packard Company
under license.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Hardware and Software Guide
HP Tablet PC Series
First Edition December 2004
Reference Number: tc4200
Document Part Number: 367186-001
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
Contents
1 Tablet PC Features
Pen Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Pointing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
Pen-Activated Buttons. . . . . . . . . . . . . . . . . . . . . . . . 1–6
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7
Front Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–9
Rear Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11
Right-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . 1–13
Left-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . 1–15
Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–17
Additional Hardware Components. . . . . . . . . . . . . . . . . 1–18
2 Power
Power Control and Light Locations . . . . . . . . . . . . . . . . .
Selecting a Power Source. . . . . . . . . . . . . . . . . . . . . . . . .
Standby and Hibernation . . . . . . . . . . . . . . . . . . . . . . . . .
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initiating Standby, Hibernation or Shutdown . . . . . . . . .
When You Leave Your Work . . . . . . . . . . . . . . . . . .
When the Power Supply Is Uncertain . . . . . . . . . . . .
When Using Infrared Communication or Drive
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–1
2–4
2–5
2–5
2–5
2–6
2–6
2–7
2–7
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
Using the Default Power Settings . . . . . . . . . . . . . . . . . . 2–8
Turning the Tablet PC or Display On or Off. . . . . . . 2–8
Initiating or Restoring from Hibernation. . . . . . . . . . 2–9
Initiating or Resuming from Standby . . . . . . . . . . . 2–10
Using Emergency Shutdown Procedures . . . . . . . . 2–11
Managing Power Options. . . . . . . . . . . . . . . . . . . . . . . . 2–11
Accessing the Power Options Window . . . . . . . . . . 2–12
Displaying the Power Meter Icon . . . . . . . . . . . . . . 2–12
Setting or Changing a Power Scheme . . . . . . . . . . . 2–12
Using a Security Password . . . . . . . . . . . . . . . . . . . 2–13
Processor Performance Controls . . . . . . . . . . . . . . . . . . 2–13
Using Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15
Identifying Battery Packs . . . . . . . . . . . . . . . . . . . . 2–16
Inserting or Removing a Primary Battery Pack. . . . 2–16
Attaching or Detaching an Optional Travel Battery 2–18
Charging Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . 2–21
Charging the Primary Battery . . . . . . . . . . . . . . . . . 2–22
Charging an Optional Travel Battery . . . . . . . . . . . 2–23
Charging a New Battery Pack . . . . . . . . . . . . . . . . . 2–23
Charging an In-Use Battery Pack . . . . . . . . . . . . . . 2–23
Monitoring the Charge of a Battery Pack . . . . . . . . . . . 2–24
Obtaining Accurate Charge Information . . . . . . . . . 2–24
Displaying Charge Information on the Screen . . . . 2–24
Managing Low-Battery Conditions . . . . . . . . . . . . . . . . 2–25
Identifying Low-Battery Conditions . . . . . . . . . . . . 2–26
Resolving Low-Battery Conditions . . . . . . . . . . . . . 2–26
Calibrating a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . 2–28
When to Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . 2–28
How to Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–28
Conserving Battery Power . . . . . . . . . . . . . . . . . . . . . . . 2–31
Conserving Power As You Work . . . . . . . . . . . . . . 2–31
Selecting Power Conservation Settings. . . . . . . . . . 2–32
Storing a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . 2–32
Disposing of a Used Battery Pack . . . . . . . . . . . . . . . . . 2–33
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
vi
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
3 Pointing Devices and Keyboard
Using a Pointing Device. . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Using the Pointing Stick . . . . . . . . . . . . . . . . . . . . . . 3–2
Using the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . 3–3
Using an External Mouse . . . . . . . . . . . . . . . . . . . . . 3–4
Setting Pointing Device Preferences . . . . . . . . . . . . . 3–4
Using Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5
Hotkey and Shortcut Key Quick Reference . . . . . . . 3–6
Initiating Standby (fn+f3) . . . . . . . . . . . . . . . . . . . . . 3–6
Switching Displays (fn+f4) . . . . . . . . . . . . . . . . . . . . 3–7
Viewing Battery Charge Information (fn+f8) . . . . . . 3–7
Decreasing Screen Brightness (fn+f9). . . . . . . . . . . . 3–8
Increasing Screen Brightness (fn+f10) . . . . . . . . . . . 3–8
Ambient Light Sensor (fn+f11) . . . . . . . . . . . . . . . . . 3–8
Displaying System Information (fn+esc) . . . . . . . . . 3–8
Using Hotkeys with External Keyboards . . . . . . . . . 3–8
Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9
Using the Internal Keypad. . . . . . . . . . . . . . . . . . . . . 3–9
Using an External Keypad. . . . . . . . . . . . . . . . . . . . 3–11
Using Presentation Mode . . . . . . . . . . . . . . . . . . . . . . . . 3–12
Using Quick Launch Buttons . . . . . . . . . . . . . . . . . . . . . 3–13
Quick Launch Buttons Control Panel . . . . . . . . . . . . . . 3–14
Accessing the Quick Launch Buttons Control Panel 3–14
Setting Presentation Mode Preferences . . . . . . . . . . 3–15
Setting Advanced Preferences . . . . . . . . . . . . . . . . . 3–17
4 Pen and Command Controls
Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Information with the Pen . . . . . . . . . . . . . .
Calibrating the Pen . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Pen Preferences . . . . . . . . . . . . . . . . . . . . . . .
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–1
4–2
4–4
4–5
vii
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
Command Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Identifying Command Controls . . . . . . . . . . . . . . . . . 4–6
Command Controls Quick Reference . . . . . . . . . . . . 4–7
Using Command Controls . . . . . . . . . . . . . . . . . . . . . 4–8
Setting Command Control Preferences . . . . . . . . . . 4–11
On-Screen Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–14
5 Multimedia
Using Audio Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1
Using the Audio-In (Microphone) Jack. . . . . . . . . . . 5–2
Using the Audio-Out (Headphone) Jack . . . . . . . . . . 5–2
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 5–3
Using Video Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4
Using the S-Video Out Jack . . . . . . . . . . . . . . . . . . . 5–5
Connecting a Monitor or Projector . . . . . . . . . . . . . . 5–6
Using CD and DVD Software . . . . . . . . . . . . . . . . . . . . . 5–7
Observing the Copyright Warning . . . . . . . . . . . . . . 5–7
Installing Software. . . . . . . . . . . . . . . . . . . . . . . . . . . 5–8
Enabling AutoPlay. . . . . . . . . . . . . . . . . . . . . . . . . . . 5–9
Installing the Universal Disc Format Reader . . . . . . 5–9
Using Windows Media Player. . . . . . . . . . . . . . . . . 5–10
Using WinDVD Player . . . . . . . . . . . . . . . . . . . . . . 5–10
Using WinDVD Creator Plus (Select Models Only) 5–10
Using Sonic RecordNow! . . . . . . . . . . . . . . . . . . . . 5–11
Changing DVD Region Settings . . . . . . . . . . . . . . . 5–11
6 Hardware Components
Using Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caring for Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a Drive to the System . . . . . . . . . . . . . . . . . .
Identifying the Hard Drive Light. . . . . . . . . . . . . . . .
Replacing the Primary Hard Drive . . . . . . . . . . . . . .
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–1
6–1
6–3
6–4
6–4
viii
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
Using PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–9
Inserting a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . 6–10
Removing a PC Card . . . . . . . . . . . . . . . . . . . . . . . . 6–11
Using SD Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–12
Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . 6–12
Removing an SD Card. . . . . . . . . . . . . . . . . . . . . . . 6–13
Adding and Upgrading Memory Modules . . . . . . . . . . . 6–14
Adding or Upgrading a Memory Module in the
Expansion Memory Slot . . . . . . . . . . . . . . . . . . . . . 6–14
Upgrading the Memory Module in the Primary
Memory Module Slot. . . . . . . . . . . . . . . . . . . . . . . . 6–19
Effects of Increasing Memory . . . . . . . . . . . . . . . . . 6–24
Connecting a Modem Cable. . . . . . . . . . . . . . . . . . . . . . 6–25
Using the Modem Cable . . . . . . . . . . . . . . . . . . . . . 6–26
Using a Country-Specific Adapter . . . . . . . . . . . . . 6–26
Connecting a Network Cable . . . . . . . . . . . . . . . . . . . . . 6–28
Linking to An Infrared Device. . . . . . . . . . . . . . . . . . . . 6–29
Setting Up an Infrared Transmission. . . . . . . . . . . . 6–30
Using Standby with Infrared . . . . . . . . . . . . . . . . . . 6–31
Connecting a USB Device . . . . . . . . . . . . . . . . . . . . . . . 6–32
Using a USB Device . . . . . . . . . . . . . . . . . . . . . . . . 6–32
Enabling USB Legacy Support . . . . . . . . . . . . . . . . 6–33
Connecting Optional External Devices . . . . . . . . . . . . . 6–33
Connecting an Optional External MultiBay and
External MultiBay II . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–34
7 Q Menu and Desktop Video Profiles
Q Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying Q Menu Controls . . . . . . . . . . . . . . . . . .
Displaying and Closing the Q Menu . . . . . . . . . . . . .
Selecting an Item from the Q Menu . . . . . . . . . . . . .
Obtaining Information About System-Defined Items
Setting Q Menu Preferences . . . . . . . . . . . . . . . . . . .
Using a System-Defined Item . . . . . . . . . . . . . . . . . .
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
7–1
7–2
7–2
7–3
7–3
7–4
7–9
ix
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
Desktop Video Profiles . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying Profiles and Modes . . . . . . . . . . . . . . . .
Using the Default Profiles . . . . . . . . . . . . . . . . . . . .
Enabling the Default Profiles . . . . . . . . . . . . . . . . .
Customizing the Profiles (Optional) . . . . . . . . . . . .
Change Mode Service . . . . . . . . . . . . . . . . . . . . . . . . . .
Tablet PC Button Driver . . . . . . . . . . . . . . . . . . . . . . . .
7–16
7–16
7–21
7–23
7–24
7–26
7–27
8 Wireless
Wireless Local Area Network (Select Models Only) . . . 8–3
Connecting Your Wireless Tablet PC to a Corporate
WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4
Connecting Your Wireless Tablet PC to a Public
WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4
Setting Up a WLAN in Your Home . . . . . . . . . . . . . 8–5
Using a WLAN Connection . . . . . . . . . . . . . . . . . . . 8–6
Using Wireless Security Features . . . . . . . . . . . . . . . 8–7
Installing Wireless Software (Optional) . . . . . . . . . . 8–7
Troubleshooting 802.11 Wireless Devices . . . . . . . . 8–9
Bluetooth (Select Models Only). . . . . . . . . . . . . . . . . . . 8–10
Turning On, Turning Off, Enabling and Disabling the
802.11 Wireless and Bluetooth Devices . . . . . . . . . . . . 8–12
Turning On the 802.11 Wireless and Bluetooth
Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–14
Turning Off and Disabling the 802.11 Wireless and
Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 8–15
9 Security
Security Features Quick Reference . . . . . . . . . . . . . . . . .
Setting Security Preferences in Computer Setup . . . . . . .
Using Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HP and Windows Passwords . . . . . . . . . . . . . . . . . . .
HP and Windows Password Guidelines . . . . . . . . . .
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
9–1
9–2
9–3
9–4
9–5
DRAFT Revised: 8/24/04
File: 367426-001TOC.fm
PN: HP-367186-001
Contents
Using Power-On Passwords. . . . . . . . . . . . . . . . . . . . . . . 9–6
Setting Power-On Passwords. . . . . . . . . . . . . . . . . . . 9–6
Entering Power-On Passwords . . . . . . . . . . . . . . . . . 9–7
Requiring a Power-On Password at Restart . . . . . . . 9–7
Using HP Administrator Passwords. . . . . . . . . . . . . . . . . 9–8
Setting HP Administrator Passwords . . . . . . . . . . . . . . . . 9–8
Entering HP Administrator Passwords . . . . . . . . . . . 9–9
Using DriveLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–9
Setting DriveLock Passwords . . . . . . . . . . . . . . . . . 9–10
Entering DriveLock Passwords . . . . . . . . . . . . . . . . 9–12
Requiring a Drivelock Password at Restart. . . . . . . 9–12
Changing DriveLock Passwords . . . . . . . . . . . . . . . 9–13
Removing DriveLock Protection. . . . . . . . . . . . . . . 9–14
Disabling a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–15
Using System Information . . . . . . . . . . . . . . . . . . . . . . . 9–15
Setting System Information Options . . . . . . . . . . . . 9–16
Firewall Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–16
Connecting an Optional Security Cable. . . . . . . . . . . . . 9–19
HP ProtectTools Security Manager
(Select Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–20
Embedded Security for ProtectTools. . . . . . . . . . . . 9–20
Credential Manager for ProtectTools . . . . . . . . . . . 9–21
BIOS Configuration for ProtectTools . . . . . . . . . . . 9–21
Smart Card Security for ProtectTools . . . . . . . . . . . 9–22
10 MultiBoot
Understanding the Default Boot Sequence . . . . . . . . . .
Enabling Bootable Devices in Computer Setup. . . . . . .
Understanding MultiBoot Results . . . . . . . . . . . . . . . . .
Setting MultiBoot Preferences . . . . . . . . . . . . . . . . . . . .
Setting a New Default Boot Sequence . . . . . . . . . .
Setting a MultiBoot Express Prompt . . . . . . . . . . . .
Entering MultiBoot Express Preferences . . . . . . . .
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
10–1
10–3
10–4
10–5
10–5
10–6
10–7
xi
Contents
11 Computer Setup
Using Computer Setup . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing Computer Setup . . . . . . . . . . . . . . . . . . .
Restoring Computer Setup Defaults . . . . . . . . . . . .
Selecting from the File Menu . . . . . . . . . . . . . . . . .
Selecting from the Security Menu . . . . . . . . . . . . . .
Selecting from the Tools Menu . . . . . . . . . . . . . . . .
Selecting from the Advanced Menu . . . . . . . . . . . .
11–1
11–2
11–2
11–3
11–4
11–6
11–6
12 HP Client Management Solutions
Configuration and Deployment . . . . . . . . . . . . . . . . . . . 11–2
HP Client Manager Software . . . . . . . . . . . . . . . . . . . . . 11–2
13 Software Update and Recoveries
Preparing to Update Software . . . . . . . . . . . . . . . . . . . .
Obtaining the Support Software CD . . . . . . . . . . . .
Accessing Tablet PC Information . . . . . . . . . . . . . .
Downloading Software from the Internet . . . . . . . . . . .
Downloading System ROM. . . . . . . . . . . . . . . . . . .
Downloading Other Software . . . . . . . . . . . . . . . . .
System Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safeguarding Your Data . . . . . . . . . . . . . . . . . . . . .
Setting System Restore Points. . . . . . . . . . . . . . . . .
Repairing the Operating System . . . . . . . . . . . . . . .
Reinstalling the Operating System . . . . . . . . . . . . .
Reinstalling Device Drivers and Other Software . .
11–1
11–2
11–2
11–3
11–4
11–5
11–5
11–6
11–6
11–7
11–7
11–9
14 Specifications
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Rated Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–2
Index
xii
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Pen Components
Component
Description
Interacts with the tablet PC whenever
the tip is touching the screen or within
1.27 cm (0.5 inch) of the screen.
When tapped on or held over a
pen-activated button, activates the
button.
Pen tip
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–1
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
Pen button
Functions like the right button on an
external mouse.
Pen tether eyelet
Used with the tether eyelet on the
tablet PC, enables you to tether the
pen to the tablet PC.
Top Components
Lights
1–2
Component
Description
1 Volume mute light
On: System sound is turned off.
2 caps lock light
On: Caps lock is on.
3 IDE drive light
On: A drive in the hard drive bay is
being accessed.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
4 Battery charge light
Amber: A battery pack is charging.
Green: A battery pack is close to full
charge capacity.
Blinking amber: A battery pack that is
the only available power source has
reached a low-battery condition. When
the battery reaches a critical
low-battery condition, the battery light
begins blinking more quickly.
Off: If the tablet PC is connected to an
external power source, the light is
turned off when all batteries in the
tablet PC are fully charged. If the tablet
PC is not connected to an external
power source, the light is turned off
until the battery reaches a low-battery
condition.
5 Power/standby light
Green: The tablet PC is on.
Blinking green: The tablet PC is in
Standby mode.
6 Wireless light
On: An integrated wireless device has
been enabled.
7 num lock light
On: Num lock is on or the embedded
numeric keypad is enabled.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–3
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Pointing Devices
1–4
Component
Description
1 Pointing stick
Moves the pointer and selects or
activates items on the screen.
2 Right pointing stick button
Functions like the right button on an
external mouse.
3 Touchpad scroll zone*
Scrolls upward or downward.
4 Right TouchPad button*
Functions like the right button on an
external mouse.
5 Left TouchPad button*
Functions like the left button on an
external mouse.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
6 TouchPad*
Moves the pointer and selects or
activates items on the screen. Can be
set to perform other mouse functions,
such as scrolling, selecting, and
double-clicking.
7 Left pointing stick button
Functions like the left button on an
external mouse.
*This table describes default settings. For information about changing the
functions of TouchPad features, refer to the “Setting Pointing Device
Preferences” section in Chapter 3, “Pointing Devices and Keyboard.”
Buttons
Component
Description
1 Presentation mode button
Turns on Presentation mode.
2 Volume mute button
Turns off tablet PC sound.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–5
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
3 Volume down button
Decreases tablet PC sound.
4 Volume up button
Increases tablet PC sound.
5 Pen eject button
Ejects the pen from the pen holder.
Pen-Activated Buttons
Component
Description
1 Tablet PC Input launch
When Windows is running, opens the
Microsoft Tablet PC Input Panel
application, which includes a
handwriting pad and an on-screen
keyboard.
button*
1–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
2 Rotate button*
Switches the image between
landscape and portrait orientation.
3 Q Menu button*
When Windows is running, opens or
closes the Q Menu.
*This table describes default settings. For information about changing the
functions of the Tablet PC Input launch button, rotate button, and Q Menu
button, refer to Chapter 4, “Pen and Command Controls.”
Keys
Component
Description
1 Function keys
Executes frequently used system
functions when pressed in combination
with the fn key.
2 Keypad keys
Can be used like the keys on an
external numeric keypad.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–7
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
1–8
Component
Description
3 Windows applications key
Displays a shortcut menu for items
beneath the pointer.
4 WIndows logo key
Displays the Microsoft Windows Start
menu.
5 fn key
Executes frequently used system
functions when pressed in combination
with a function key or the esc key.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Front Components
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–9
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
1 Infrared port
Provides wireless communication
between the tablet PC and an optional
IrDA-compliant device.
2 Bluetooth® antenna*
Sends and receives Bluetooth device
signals.
Å
3 Display release latch
Exposure to Radio
Frequency Radiation. The
radiated output power of this
device is below the FCC radio
frequency exposure limits.
Nevertheless, the device
should be used in such a
manner that the potential for
human contact during normal
operation is minimized. To
avoid the possibility of
exceeding the FCC radio
frequency exposure limits,
human proximity to the
antennae should be not less
than 20 cm (8 inches) during
normal operation, including
when the tablet PC display is
closed.
Opens the tablet PC.
*The antennae is available on only select models. The antennae is not
visible from the outside of the tablet PC. For optimal transmission, keep the
areas immediately around the antennae free from obstructions.
1–10
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Rear Components
Component
Description
1 USB port
Connects USB 1.1- and 2.0-compliant
devices to the tablet PC using a
standard USB cable, or connects
an optional external MultiBay or
MultiBay II to the tablet PC. The
external MultiBay must also be
connected to an external power
source.
2 RJ-11 (modem) jack
Connects a modem cable.
3 RJ-45 (network) jack
Connects a network cable.
4 Power connector
Connects an AC adapter or an optional
Automobile Power Adapter/Charger, or
Aircraft Power Adapter.
5 External monitor port
Connects an optional external monitor
or overhead projector.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–11
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
6 S-Video out jack
Is a 7-pin, dual-purpose jack.
It connects an optional S-Video device,
such as a television, VCR, camcorder,
overhead projector, or video capture
card, with an optional, standard (4-pin)
S-Video cable.
The extra 3 pins also enable an
optional S-Video-to-composite adapter
to be used with the tablet PC.
4 Jog dial*
Functions like enter and the up and
down arrow keys on a standard
keyboard.
■
■
■
5 Windows Security button*
Press inward to enter a command.
Rotate upward to scroll upward.
Rotate downward to scroll
downward.
When pressed with the pen tip or a
small object like the end of a paper clip
while:
■
Windows is open, enters the
ctrl+alt+delete command.†
■
The Setup utility is open, enters
the reset command.
*This table describes default settings. For information about changing the
functions of the Windows security button and jog dial, refer to Chapter 4,
“Pen and Command Controls.”
†To protect your work and the system, the ctrl+alt+delete command cannot
be entered using the Ctrl, Alt, and Del keys on the on-screen keyboard.
1–12
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Right-Side Components
Component
Description
1 Audio-out (headphone) jack
Produces system sound when
connected to optional powered stereo
speakers, headphones, headset, or
television audio.
2 Audio-in (microphone) jack
Connects an optional monaural or
stereo microphone.
3 USB port
Connects USB 1.1- and 2.0-compliant
devices to the tablet PC using a
standard USB cable, or connects
an optional external MultiBay or
MultiBay II to the tablet PC. The
external MultiBay must also be
connected to an external power
source.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–13
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
Ejects PC Cards from the PC Card
slot.
PC Card eject button
5 PC Card slot
Supports optional Type I, Type II, or
Type III 32-bit (CardBus) or 16-bit
PC Cards.
6 SD Card slot
Accepts SD (Secure Digital) Memory
Cards.
1–14
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Left-Side Components
Component
Description
1 Security cable slot
Attaches an optional security cable to
the tablet PC.
Ä
2 Vent
Security solutions are
designed to act as deterrents.
These deterrants may not
prevent a product from being
mishandled or stolen.
Enables airflow to cool internal
components.
Ä
3 Wireless button*
To prevent overheating, do
not obstruct vents. Using the
tablet PC on a soft surface,
such as a pillow, blanket, rug,
or thick clothing, may block
airflow.
Turns on wireless LAN or Bluetooth.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–15
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Component
Description
4 USB port
Connects USB 1.1- and 2.0-compliant
devices to the tablet PC using a
standard USB cable, or connects
an optional external MultiBay or
external MultiBay II to the tablet PC.
The external MultiBay must be
connected to an external power
source.
5 HP Information Center button content to come
6 Power/standby switch*
When the tablet PC is
■
Off, slide to the left and release to
turn on the tablet PC.
■
In Standby, slide to the right or left
and release to exit Standby.
■
In Hibernation, slide to the right or
left and release to exit
Hibernation.
■
On, slide to the right and release
to enter Standby.
If the tablet PC has stopped
responding and Microsoft® Windows®
shutdown procedures cannot be used,
slide to the left and hold for 5 seconds
to turn off the tablet PC.
7 Speaker
Produces tablet PC sound.
8 Pen holder
Secures the pen to the tablet PC.
*This table describes default settings. For information about changing the
functions of the power features, refer to the “Managing Power Options”
section in Chapter 2, “Power.” For inforamtion about changing the functions
of the wireless features, refer to Chapter 8, “Wireless.”
1–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Bottom Components
Component
Description
1 Docking connector
Connects the tablet PC to an optional
docking device.
2 Vents (3)
Enable airflow to cool internal
components.
Ä
To prevent overheating, do
not obstruct vents. Using the
tablet PC on a soft surface,
such as a pillow, blanket, rug,
or thick clothing, may block
airflow.
3 Travel battery connector
Connects an optional travel battery.
4 Hard drive bay
Holds the primary hard drive.
5 Primary battery release latch Releases the primary battery pack
from the battery bay.
6 Primary battery bay
Holds the primary battery pack.
7 Memory module
Contains one primary memory slot
(populated).
compartment
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
1–17
DRAFT Revised: 8/24/04
File: Chap1.fm
PN: HP-367426-001
Tablet PC Features
Additional Hardware Components
Component
Description
1 AC adapter
Converts AC power to DC power.
2 Power cord*
Connects an AC adapter to an AC wall
outlet.
3 Primary battery pack*
Runs the tablet PC when the tablet PC
is not connected to external power.
4 Modem adapter*
Adapts the modem cable for a
non-RJ-11 telephone jack.
5 Modem cable*
Connects a modem to a telephone
jack or a country-specific modem
adapter.
*Power cords, modem cables, and modem adapters vary in appearance by
region and country. Battery packs vary by model.
1–18
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Power Control and Light Locations
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–1
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Component
Description
1 fn+f3
Initiates Standby.
2 Power/standby switch
When the tablet PC is
■
Off, slide to the left and release to
turn on the tablet PC.
■
In Standby, slide to the right or left
and release to exit Standby.
■
In Hibernation, slide to the right or
left and release to exit
Hibernation.
■
On, slide to the right and release
to enter Standby.
If the tablet PC has stopped
responding and Microsoft® Windows®
shutdown procedures cannot be used,
slide to the left and hold for 5 seconds
to turn off the tablet PC.
3 Power light
2–2
Green: The tablet PC is on.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Component
Description
4 Standby light
Blinking green: The tablet PC is in
Standby mode.
5 Power/standby light
Green: The tablet PC is on.
Blinking green: The tablet PC is in
Standby mode.
6 Battery light
Amber: A battery pack is charging.
Green: A battery pack is close to full
charge capacity.
Blinking amber: A battery pack that is
the only available power source has
reached a low-battery condition. When
the battery reaches a critical
low-battery condition, the battery light
begins blinking more quickly.
Off: If the notebook is connected to an
external power source, the light is
turned off when all batteries in the
notebook are fully charged. If the
notebook is not connected to an
external power source, the light is
turned off until the battery reaches a
low-battery condition.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–3
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Selecting a Power Source
The tablet PC can run on internal or external AC power. The
following table indicates the best power sources for common
tasks.
Task
Recommended Power Source
Work in most software applications
■
Charged battery pack in the
tablet PC
■
External power supplied through
one of the following devices:
❐
❐
❐
❐
AC adapter
Optional docking device
Optional Aircraft Adapter
Optional Automobile Power
Adapter/Charger
❐ Optional 90W Air/Auto/AC
Combo Adapter
Charge or calibrate a battery pack in
the tablet PC
External power supplied through
■
■
■
AC adapter
■
Optional 90W Air/Auto/AC
Combo Adapter
Ä
Install or modify system software or
write to a CD
2–4
Optional docking device
Optional Automobile Power
Adapter/Charger
To prevent damage to the
tablet PC and aircraft
systems, do not charge the
battery pack while you are
using an Auto/Air/AC
Adapter on an aircraft.
External power supplied through
■
■
AC adapter
Optional docking device
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Standby and Hibernation
Standby and Hibernation are energy-saving features that conserve
power and reduce startup time. They can be initiated by you or
by the system. Refer to the “Initiating Standby, Hibernation or
Shutdown” section in this chapter for details about when to use
each setting.
Standby
Ä
CAUTION: To avoid a complete battery discharge, do not leave your
tablet PC in Standby for extended periods. Connect the tablet PC to an
external power source.
Standby reduces power to system components that are not in use.
When Standby is initiated, your work is saved in random access
memory (RAM) and the screen is cleared. When you resume
from Standby, your work returns to the screen where you left off.
■
Saving your work before initiating Standby is not usually
necessary but is a recommended precaution.
■
When the tablet PC is in Standby, the standby light and the
power/standby light flash.
Hibernation
Hibernation saves your work to a hibernation file on the hard
drive, and then shuts down the tablet PC. When you restore from
Hibernation, your work returns to the screen where you left off. If
a power-on password has been set, the password must be entered
to restore from Hibernation.
You can disable Hibernation. However, if Hibernation is disabled,
and the system reaches a low-battery condition, the system will
not automatically save your work while power is on or when
Standby has been initiated.
In the Power Options window, Hibernation is not displayed as an
option if it has been disabled. You must enable Hibernation in
order to select it in the Power Options window. To verify that
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–5
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Hibernation is enabled, select Start > Control Panel > Power
Options > Hibernate tab. Make sure that the Enable hibernate
support check box is selected.
Ä
CAUTION: If the configuration of the tablet PC is changed during
Hibernation, resuming from Hibernation may not be possible. When the
tablet PC is in Hibernation:
■ Do not dock or undock the tablet PC in a docking device.
■ Do not add or remove memory modules.
■ Do not insert or remove any hard drives.
■ Do not connect or disconnect external devices.
■ Do not insert or remove a PC Card or a Secure Digital (SD)
Memory Card.
Initiating Standby, Hibernation or
Shutdown
The following sections explain when to initiate Standby or
Hibernation and when to shut down your tablet PC.
When You Leave Your Work
Initiating Standby clears the screen and uses less power than
leaving the tablet PC on. Your work returns instantly to the screen
when you resume from Standby.
Initiating Hibernation clears the screen, saves your work to the
hard drive, and uses much less power than Standby.
Shutting down the tablet PC and removing the battery pack is
recommended to extend the life of the battery pack when the
tablet PC will be disconnected from external power for an
extended period. For details on battery pack storage, refer to the
“Storing a Battery Pack” section in this chapter.
2–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
When the Power Supply Is Uncertain
Make sure that Hibernation remains enabled, especially if you are
operating the tablet PC on battery power and do not have access
to an external power supply. If the battery pack fails, Hibernation
saves your work to a hibernation file and shuts down the tablet
PC.
HP recommends that if you pause your work when the power
supply is uncertain, you do one of the following:
■
Initiate Hibernation.
■
Shut down the tablet PC.
■
Save your work, and then initiate Standby.
When Using Infrared Communication or
Drive Media
Ä
CAUTION: Do not initiate Standby or Hibernation while using drive
media. Doing so may result in possible video and audio degradation
and loss of audio or video playback functionality.
Standby and Hibernation interfere with the use of infrared and
Bluetooth communication, and drive media. Note the following
guidelines:
■
If the tablet PC is in Standby or Hibernation, you cannot
initiate an infrared or Bluetooth transmission.
■
If Standby or Hibernation is accidentally initiated while a
drive medium (such as a diskette, CD, or DVD) is in use:
❏ Your playback may be interrupted.
❏ You may see a warning message: “Putting the computer
into Hibernation or Standby may stop the playback. Do
you want to continue?” Select No.
❏ You may need to restart the playback to resume audio and
video.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–7
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Using the Default Power Settings
The following tables describe the factory power settings on the
tablet PC. You can change many of these settings according to
your preference. For more information on changing power
settings, refer to the “Managing Power Options” section in this
chapter.
Turning the Tablet PC or Display On or Off
Task
Procedure
Result
Turn on the
tablet PC.
Slide the power/standby switch
to the left.
■
The power light and
the power/standby
light are turned on.
■
The operating
system loads.
■
The power light and
power/standby light
are turned off.
■
The operating
system shuts
down.
■
The tablet PC is
turned off.
Shut down the
tablet PC.*
Save your work and close all
open applications. Then
■
■
Turn off the
display while the
power is on.
Slide the power/standby
switch to the left and follow
the on-screen directions (if
displayed) for shutting
down the tablet PC.
Shut down the tablet PC
through the operating
system. Select Start >
Shut Down> Shut Down
> OK.
Close the tablet PC.
Closing the tablet PC
activates the display
switch, which turns off
the display. This
conserves battery
power.
* If the system is unresponsive and you are unable to shut down the tablet PC
with these procedures, refer to the “Using Emergency Shutdown Procedures”
section in this chapter.
2–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Initiating or Restoring from Hibernation
Task
Procedure
Result
Initiate
Hibernation.
■
Select Start > Shut Down>
Hibernate > OK. (If the
Hibernate option is not
displayed, press and
hold the shift key.)
■
The power
light and
power/standby
light are turned
off.
■
If Hibernation has been
configured, slide the
power/standby switch to the
right or left.
■
The screen
clears.
■
The power
light and
power/standby
light are turned
off.
■
The screen
clears.
■
The power
light and
power/standby
light are turned
on.
■
Your work returns
to the screen.
Allow the system
to initiate
Hibernation
(with
Hibernation
enabled).
Restoring from
user-initiated or
system-initiated
Hibernation.
No action required.
■
If the tablet PC is running on
battery power, the system
initiates Hibernation after 30
minutes of tablet PC
inactivity or when the battery
pack(s) reach a critical
low-battery condition.
■
If the tablet PC is connected
to external power, the
system does not initiate
Hibernation.
■
Power settings and timeouts
can be changed in the
Power Options window.
Slide the power/standby switch to
the right or left.
✎
If the system initiated
Hibernation because of
a critical low-battery
condition, connect
external power or insert
a charged battery pack
before you slide the
power/standby switch.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–9
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Initiating or Resuming from Standby
Task
Procedure
Result
Initiate Standby.
■
Slide the power/standby
switch to the right.
■
■
With the tablet PC on,
press fn+f3.
The power light and
power/standby light
blink.
■
The screen clears.
■
The standby light
and power/standby
light blink.
■
The screen clears.
■
The standby light
and power/standby
light are turned off.
■
Your work returns
to the screen.
■
Allow the system
to initiate
Standby.
Resume from
user-initiated or
system-initiated
Standby.
2–10
Select Start > Shut
Down> Standby > OK.
(If the Standby option
is not displayed, press the
shift key.)
No action required.
■
If the tablet PC is running
on battery power, the
system initiates Standby
after 10 minutes of tablet
PC inactivity. (Default
setting)
■
If the tablet PC is attached
to external power, the
system does not initiate
Standby.
■
Power settings and
timeouts can be changed
in the Power Options
window.
■
Slide the power/standby
switch to the right or left.
■
If the display was closed
while the tablet PC was in
Standby, open the display.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Using Emergency Shutdown Procedures
Ä
CAUTION: Emergency shutdown procedures result in the loss of
unsaved data.
If the tablet PC is unresponsive and you are unable to use normal
Windows shutdown procedures, try the following emergency
procedures, in the sequence provided:
■
Press ctrl+alt+delete. Select Shut Down.
■
Slide and hold the power/standby switch to the left for at least
5 seconds.
■
Disconnect the tablet PC from external power and remove
the battery pack. For more information about removing
and storing the battery pack, refer to the “Storing a Battery
Pack” section in this chapter.
Managing Power Options
Many default power settings can be changed in the Power
Options window. For example, you can set an audio alert to
warn you when the battery pack reaches a low-power condition,
or you can change the default settings for the power/standby
switch.
By default, when the tablet PC is on:
■
Pressing the power/standby switch to the right initiates
Standby.
■
Pressing the fn+f3 hotkey, called the “sleep button” in the
operating system, initiates Standby.
■
The display switch turns off the display. The display switch is
activated by closing the display. (By default and when using
custom settings, the display switch also turns on the tablet PC
if the display is opened while the tablet PC is in Standby.)
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–11
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Accessing the Power Options Window
To access the Power Options window, double-click the Power
Meter icon on the taskbar, or select Start > Control Panel >
Power Options.
Displaying the Power Meter Icon
The Power Meter icon is on your taskbar by default. The icon
changes shape to indicate whether the tablet PC is running on a
battery pack or external power. Double-click the icon to display
the Power Options window.
To hide or show the Power Meter icon on the taskbar:
1. Access the Power Options window.
2. Select the Advanced tab.
3. Select or clear the Always show icon on the taskbar
check box.
4. Select Apply.
5. Select OK.
see an icon you have placed on the taskbar, the icon
✎ Ifmayyoubecannot
hidden. Select the arrow or vertical bar on the taskbar and
expand it to view hidden icons.
Setting or Changing a Power Scheme
The Power Schemes tab in the Power Options window assigns
power levels to system components. You can assign different
schemes depending on whether the tablet PC is running on a
battery pack or external power.
You can also set a power scheme that initiates Standby or turns
off the display or hard drive after a time interval that you specify.
2–12
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
To set a power scheme:
1. Access the Power Options window, and then select the
Power Schemes tab.
2. Select the power scheme you wish to modify, and adjust
options in the lists on the screen.
3. Select Apply.
Using a Security Password
You can add a security feature that prompts you for a password
when the tablet PC is turned on or restores from Standby or
Hibernation.
To set a password prompt, access the Power Options window,
and then select the Advanced tab. Select the check box for
Prompt for password when the computer resumes from
Standby, and select Apply.
For more information about using security passwords, refer to
Chapter 9, “Security.”
Processor Performance Controls
On select tablet PC models, Windows XP supports software that
enables you to control processor performance. The central
processing unit (CPU) speed can be set for optimal performance
or for optimal power conservation.
For example, the software can be set to trigger an automatic
change in processor speed when the power source changes from
external power to battery pack power, or when the tablet PC use
changes between active and idle.
Processor performance controls are managed in the Power
Options window.
To access Windows XP processor performance controls, select
Start > Control Panel > Power Options > Power Schemes tab.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–13
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
The power scheme you select determines how the processor
performs when the tablet PC is connected to external power or is
running on battery power. Each power scheme for external power
or battery power sets a specific processor state.
Different states may be used, depending on whether the tablet PC
is running on external or battery power. After a power scheme
has been set, no other intervention is required to control the
performance of your tablet PC processor. The following table
describes the processor performance on external and battery
power for the available power schemes.
Processor
Performance While
on External Power
Processor
Performance While
on Battery Power
Home/Office Desk
Always runs at the
highest performance
state.
Performance state is
determined based on
CPU demand.
Portable/Laptop
Performance state is
determined based on
CPU demand.
Performance state is
determined based on
CPU demand.
Presentation
Performance state is
determined based on
CPU demand.
Starts at lowest
performance state,
then uses linear
performance reduction
(stop-clock throttling)
as the battery
discharges.
Power Scheme
2–14
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Processor
Performance While
on External Power
Processor
Performance While
on Battery Power
Always On
Always runs at the
highest performance
state.
Always runs at the
highest performance
state.
Minimal Power
Management
Performance state is
determined based on
CPU demand.
Performance state is
determined based on
CPU demand.
Max Battery
Performance state is
determined based on
CPU demand.
Starts at lowest
performance state,
then uses linear
performance reduction
(stop-clock throttling)
as the battery
discharges.
Power Scheme
Using Battery Packs
When the tablet PC is connected to external AC power, the tablet
PC runs on AC power. When a charged battery pack is in the
tablet PC and the tablet PC is not connected to external power, the
tablet PC runs on battery power.
The tablet PC switches between AC power and battery power
according to the availability of an external AC power source. For
example, if the tablet PC contains a charged battery pack and is
running on external AC power supplied through the AC adapter,
the tablet PC switches to battery power if the AC adapter is
disconnected from the tablet PC.
You can leave a battery pack in the tablet PC or in storage,
depending on how you work. Keeping a battery pack in the tablet
PC enables the battery pack to charge whenever the tablet PC is
connected to external AC power and also protects your work in
case of a power outage.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–15
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
However, battery packs in the tablet PC slowly discharge when
the tablet PC is turned off. For this reason, the primary battery
pack is not shipped inside the tablet PC and must be inserted
before the tablet PC can run on battery power.
Identifying Battery Packs
This tablet PC supports up to 2 battery packs:
■
The primary battery pack is a 6-cell lithium-ion battery pack
that can be used only in the battery bay. One primary battery
pack is included with the tablet PC.
■
The travel battery pack is an optional 8-cell lithium-ion
battery pack that can be used only in the travel battery case.
If you will not be using the tablet PC for 2 weeks or more, remove
the battery pack and store it as described in the “Storing a Battery
Pack” section in this chapter to prolong battery pack life. For
more information about leaving your work, refer to the “Initiating
Standby, Hibernation or Shutdown” section in this chapter.
compatible AC adapters and battery packs should be used
✎ Only
with the tablet PC. For additional information, visit the HP Web
site at http://www.hp.com or use the Worldwide Telephone Numbers
booklet, included with your tablet PC, to contact Customer Care.
Inserting or Removing a Primary
Battery Pack
Ä
CAUTION: To prevent loss of work when removing a battery pack that
is the sole power source, initiate Hibernation or turn off the tablet PC
before removing the battery pack.
To insert a primary battery pack:
1. Turn the tablet PC upside down.
2. Slide the battery pack 1 into the battery bay until it is seated.
2–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
3. Press the battery pack 2 into the tablet PC.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–17
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
To remove a primary battery pack:
1. Turn the tablet PC upside down with the battery bay toward
you.
2. Press the battery release latch 1 to the right.
3. Slide the battery pack 2 out of the tablet PC.
Attaching or Detaching an Optional Travel
Battery
To attach an optional travel battery:
1. Turn the tablet PC upside down with the primary battery bay
toward you.
2–18
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
2. Open the travel battery connector on the bottom of the tablet
PC by sliding the cover to the right.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–19
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
3. Insert the tabs on the travel battery caddy into the recesses on
the bottom of the tablet PC 1.
4. Press the travel battery caddy onto the tablet PC until it snaps
into place 2.
5. Slide the locking latch 3.
2–20
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
To detach an optional travel battery:
1. Unlock the travel battery from the tablet PC by sliding the
locking switch 1.
2. Press the release latch 2.
3. Lift the travel battery 3 up and away from the tablet PC.
Charging Battery Packs
Multiple battery packs in the system charge and discharge in a
preset sequence:
■
Charge sequence:
1. Primary battery in the tablet PC battery bay
2. Travel battery
■
Discharge sequence:
1. Travel battery
2. Primary battery in the tablet PC battery bay
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–21
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
While a battery pack is charging, the battery light on the tablet PC
is on. The light is turned off when all battery packs are fully
charged.
packs can also be charged in the optional HP Universal
✎ Battery
Charger.
Charging the Primary Battery
Ä
CAUTION: To prevent damage to the tablet PC and aircraft systems, do
not charge the battery pack while you are using an Auto/Air/AC
Adapter on an aircraft.
The primary battery pack charges when it is inserted into the
tablet PC and the tablet PC is connected to external power.
External power can be supplied through the following:
2–22
■
AC adapter
■
Optional docking device
■
Optional Automobile Power Adapter/Charger
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
■
Optional 90W Air/Auto/AC Combo Adapter
optional Aircraft Power Adapter can run the tablet PC, but it
✎ An
cannot charge a battery pack.
Charging an Optional Travel Battery
The battery pack in the travel battery charges when it is attached
to the tablet PC and the tablet PC is connected to external power.
External power can be supplied through the following:
■
AC Adapter
■
Optional docking device
■
Optional Automobile Power Adapter/Charger
■
Optional 90W Air/Auto/AC Combo Adapter
the travel battery covers the docking connector, the
✎ Because
travel battery cannot be used or charged with a docking device.
optional Aircraft Power Adapter can run the tablet PC, but it
✎ An
cannot charge a battery pack.
Charging a New Battery Pack
Fully charge the battery pack while the tablet PC is connected to
external power through the AC adapter.
A new battery pack that has been partially but not fully charged
can run the tablet PC, but the battery charge indicators may
be inaccurate.
Charging an In-Use Battery Pack
To prolong battery life and increase the accuracy of battery
charge indicators:
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–23
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
■
Allow a battery pack to discharge to 10 percent of a full
charge through normal use before charging it.
■
When you charge a battery pack, charge it fully.
Monitoring the Charge of a Battery
Pack
This section explains several ways you can determine the amount
of charge in your battery pack.
Obtaining Accurate Charge Information
To increase the accuracy of all battery charge displays:
■
Allow a battery pack to discharge to about 10 percent of a full
charge through normal use before charging it.
■
When you charge a battery pack, charge it fully.
■
If a battery pack has not been used for one month or more,
calibrate the battery pack instead of simply charging it. For
calibration instructions, refer to the “Calibrating a Battery
Pack” section in this chapter.
Displaying Charge Information on the
Screen
This section explains how to access and interpret battery charge
displays.
2–24
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Viewing Charge Displays
To view information about the status of any battery pack in the
tablet PC:
■
Select the Power Meter icon on the taskbar.
-or-
■
Select Start > Control Panel > Power Options > Power
Meter tab.
Interpreting Charge Displays
Most charge displays report battery status as both a percentage
and as the number of minutes of charge remaining.
■
The percentage indicates the amount of charge remaining in
the battery pack.
■
The time indicates the approximate running time remaining
on the battery pack if the battery pack continues to provide
power at the current level. For example, the time remaining
will decrease when you start playing a DVD and will increase
when you stop playing a DVD.
Most charge displays identify battery packs by location:
■
Location 1 is the battery pack in the primary battery bay.
■
Location 2 is the optional travel battery pack.
On some displays, a lightning bolt icon may be displayed on the
charge display beside a battery pack location. The icon indicates
that the battery pack in that location is charging.
Managing Low-Battery Conditions
Some low-battery condition alerts and system responses can be
changed in the Power Options window of the operating system.
The information in this section describes the alerts and system
responses set at the factory. Preferences set in the Power Options
window do not affect lights.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–25
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Identifying Low-Battery Conditions
This section explains how to identify low and critical low-battery
conditions.
Low-Battery Condition
When a battery pack that is the only power source for the tablet
PC reaches a low-battery condition, the battery light blinks.
Critical Low-Battery Condition
If a low-battery condition is not resolved, the tablet PC enters
a critical low-battery condition.
In a critical low-battery condition:
■
If Hibernation is enabled and the tablet PC is on or in
Standby, the tablet PC initiates Hibernation.
■
If Hibernation is disabled and the tablet PC is on or in
Standby, the tablet PC remains briefly in Standby, then
shuts down and loses your unsaved work.
To verify that Hibernation is enabled, select Start > Control
Panel > Power Options > Hibernate tab. Make sure that the
Enable hibernate support check box is selected.
Resolving Low-Battery Conditions
Ä
2–26
CAUTION: If the tablet PC has reached a critical low-battery condition
and has initiated Hibernation, do not restore power until the
power/standby light is turned off.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
When External Power Is Available
To resolve a low-battery condition when external power is
available, do one of the following:
■
Connect the AC adapter.
■
Plug an optional Automobile Power Adapter/Charger into the
tablet PC and into a vehicle cigarette lighter receptacle.
■
Plug an optional 90W Air/Auto/AC Combo Adapter into the
tablet PC and into a vehicle cigarette lighter receptacle or into
the in-seat power supply available on some commercial
aircraft.
Ä
■
To prevent damage to the tablet PC and aircraft systems,
do not charge the battery pack while you are using an
Auto/Air/AC Adapter on an aircraft.
Plug an optional Aircraft Power Adapter into the tablet PC
and into the in-seat power supply available on some
commercial aircraft. (An optional Aircraft Power Adapter
can run the tablet PC but cannot charge a battery pack.)
When a Charged Battery Pack Is Available
To resolve a low-battery condition when a charged battery pack is
available, turn off the tablet PC or initiate Hibernation, insert a
charged battery pack, and then turn on the tablet PC.
When No Power Source Is Available
To resolve a low-battery condition when no power source is
available, initiate Hibernation, or save your work and shut down
the tablet PC.
When theTablet PC Cannot Exit Hibernation
To resolve a low-battery condition when the tablet PC lacks the
power to exit Hibernation:
1. Insert a charged battery pack or connect external power.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–27
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
2. Exit Hibernation by pressing the power/standby switch to the
right or left.
Calibrating a Battery Pack
This section describes when and how to calibrate a battery pack.
When to Calibrate
Even if a battery pack is heavily used, it should not be necessary
to calibrate it more than once a month. It is not necessary to
calibrate a new battery pack before first use. Calibrate the battery
pack under the following conditions:
■
When battery charge displays seem inaccurate.
■
When you observe a significant decrease in battery run time.
■
When the battery pack has been unused for one month
or more.
How to Calibrate
To calibrate a battery pack, you must fully charge, fully
discharge, then fully recharge the battery pack.
Charging the Battery Pack
A battery pack can charge whether the tablet PC is off or in use,
but it will charge faster when the tablet PC is off.
To charge the battery pack:
1. Insert the battery pack into the tablet PC.
2. Connect the tablet PC to an AC outlet or an optional
Automobile Power Adapter/Charger. The battery light
on the tablet PC is turned on.
3. Leave the tablet PC connected to external power until
the battery pack is fully charged. The battery light on the
tablet PC is turned off.
2–28
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Discharging the Battery Pack
Before you begin a full discharge, disable Hibernation.
To disable Hibernation:
1. Select Start > Control Panel > Power Options > Hibernate
tab.
2. Clear the Enable Hibernation check box.
3. Select Apply.
The tablet PC must remain on while the battery pack is being
discharged. The battery pack can discharge whether or not you
are using the tablet PC, but will discharge faster while the tablet
PC is in use.
■
If you plan to leave the tablet PC unattended during the
discharge, save your work before beginning the discharge
procedure.
■
If you use the tablet PC occasionally during the discharge
procedure and have set energy-saving timeouts, expect the
following performance from your system during the
discharge process:
❏
The monitor will not turn off automatically.
❏
Hard drive speed will not decrease automatically while
the tablet PC is idle.
❏
System-initiated Standby will not occur.
To fully discharge a battery pack:
1. Select the Power Meter icon on the taskbar, or access the
Power Schemes tab by selecting Start > Control Panel >
Power Options > Power Schemes tab.
2. Make a note of the 2 settings in the Plugged In column and
the 2 settings in the Running on Batteries column so that you
can reset them after the calibration.
3. Use the drop-down lists to set the 4 options (2 in each
column) to Never.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–29
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
4. Select OK.
5. Disconnect the tablet PC from the external power source, but
do not turn off the tablet PC.
6. Run the tablet PC on battery power until the battery pack is
fully discharged. The battery light begins to blink when the
battery pack has discharged to a low-battery condition. When
the battery pack is fully discharged, the battery light is turned
off and the tablet PC shuts down.
Recharging the Battery Pack
To recharge the battery pack:
1. Connect the tablet PC to external power and maintain the
connection until the battery pack is fully recharged. The
battery light on the tablet PC is turned off.
You can use the tablet PC while the battery pack is recharging
but the battery pack will charge faster if the tablet PC is off.
2. If the tablet PC is off, turn it on when the battery pack is fully
charged and the battery light is turned off.
3. Access the Power Schemes tab by selecting Start > Control
Panel > Power Options > Power Schemes tab.
4. Refer to the settings you recorded earlier. Reenter the settings
that you recorded for the items in the Plugged In column and
the Running on Batteries column.
5. Select OK.
Ä
2–30
CAUTION: After calibrating the battery pack, reenable Hibernation.
Failure to reenable Hibernation may result in a complete battery drain and
potential data loss.
To reenable Hibernation, select Start > Settings > Control Panel >
Power Options > Hibernate tab. Select the Enable Hibernation
check box, and then select Apply.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Conserving Battery Power
Using the battery conservation procedures and settings described
in this section extends the time that a battery pack can run the
tablet PC from a single charge.
Conserving Power As You Work
To conserve power as you use the tablet PC:
■
Turn off wireless and local area network (LAN) connections
and exit modem applications when you are not using them.
■
Disconnect external devices you are not using that are not
connected to an external power source.
■
Stop or remove a PC Card you are not using. For more
information, refer to Chapter 6, “Hardware Components.”
■
Use the fn+f9 and fn+f10 hotkeys to adjust screen brightness
as you need it.
■
Use optional powered speakers instead of the internal
speakers, or use the volume buttons to adjust system volume
as you need it.
■
Turn off a device connected to the S-Video out jack by using
the fn+f4 hotkey or by turning off support for the device in
Windows.
■
Run the tablet PC on external power while formatting a
diskette.
■
If you leave your work, initiate Standby or Hibernation or
shut down the tablet PC.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–31
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Selecting Power Conservation Settings
To set the tablet PC to conserve power:
■
Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. To access screen
saver settings, select Start > Control Panel > Display >
Screen Saver tab.
■
Select a Power Scheme with low-power-use settings through
the operating system. Refer to the “Setting or Changing a
Power Scheme” section in this chapter.
Storing a Battery Pack
If a tablet PC will be unused and unplugged for more than
2 weeks, remove any battery packs and store them separately.
Ä
CAUTION: To prevent damage to a battery pack, do not expose it to
high temperatures for extended periods of time.
High temperatures accelerate the self-discharge rate of a stored
battery pack. To prolong the charge of a stored battery pack, place
it in a cool, dry place.
Use the following table to estimate how long you can safely store
a battery pack. The storage times provided are based on a battery
pack that contains 50 percent of a full charge. A fully charged
battery pack can be safely stored for longer times; a battery pack
containing a lower charge can be safely stored for less time.
Calibrate a battery pack that has been stored for one month or
more before using it.
Temperature
Range °F
Temperature
Range °C
Safe Storage Time
115° to 140°
46° to 60°
Less than 1 month
79° to 113°
26° to 45°
No more than 3 months
32° to 77°
0° to 25°
1 year
2–32
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
Disposing of a Used Battery Pack
Å
WARNING: There is a risk of fire and chemical burn if a battery pack
is handled improperly. Do not disassemble, crush, or puncture a battery
pack or short the contacts on a battery pack. Do not expose a battery
pack to temperatures higher than 60°C (140°F), or dispose of a battery
pack in water or fire.
When a battery pack has reached the end of its useful life, do not
dispose of it in general household waste.
■
In Europe, dispose of or recycle battery packs by using the
public collection system or by returning them to HP, your
authorized HP service partners, or their agents.
■
In other regions, refer to the Worldwide Telephone Numbers
booklet, included with the tablet PC, to contact Customer
Care and request information about battery pack disposal.
For more information about battery pack precautions and disposal
and the complete text of governmental agency notices, refer to the
Regulatory and Safety Notices guide on the Tablet PC
Documentation CD.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
2–33
DRAFT Revised: 8/24/04
File: Chap2.fm
PN: HP-367186-001
Power
2–34
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Using a Pointing Device
The pointing stick and TouchPad controls can be used
interchangeably.
Component
Description
1 Pointing stick
Moves the pointer and selects or
activates items on the screen.
2 Right pointing stick button
Functions like the right button on an
external mouse.
3 Touchpad scroll zone*
Scrolls upward or downward.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–1
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Component
Description
4 Right TouchPad button*
Functions like the right button on an
external mouse.
5 Left TouchPad button*
Functions like the left button on an
external mouse.
6 TouchPad*
Moves the pointer and selects or
activates items on the screen. Can be
set to perform other mouse functions,
such as scrolling, selecting, and
double-clicking.
7 Left pointing stick button
Functions like the left button on an
external mouse.
*This table describes default settings. For information about changing the
functions of TouchPad features, refer to the “Setting Pointing Device
Preferences” section in this chapter.
Using the Pointing Stick
To move the pointer, press the pointing stick in the direction
you want to move the pointer. Use the left and right pointing stick
buttons as you would the left and right buttons on an external
mouse.
3–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
To change the pointing stick cap:
1. Turn off the tablet PC.
2. Gently pull off the used pointing stick cap.
3. Press a replacement cap into place.
✎ Replacement caps are not included with the tablet PC.
Using the TouchPad
To move the pointer, slide your finger across the TouchPad
surface in the direction you want the pointer to go. Use the
left and right TouchPad buttons as you would the left and right
buttons on an external mouse. To scroll up and down using the
TouchPad vertical scroll zone, slide your finger up or down over
the raised area.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–3
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Using an External Mouse
An external USB mouse can be connected to the tablet PC using
one of the ports on the right or left side of the tablet PC. An
external serial mouse can be connected to the serial port on the
right side of the tablet PC. An external PS/2 or USB mouse can be
connected to the system using the connectors on an optional
docking device.
Setting Pointing Device Preferences
Mouse Properties in Windows enables you to customize settings
for pointing devices, including
■
Enabling or disabling a pointing device (enabled by default).
■
TouchPad tapping, which enables you to tap the TouchPad
once to select an object or twice to double-click an object
(disabled by default).
■
Edge motion, which enables you to continue to scroll even
though your finger has reached the edge of the TouchPad
(disabled by default).
■
Palm Check, which helps prevent moving the pointer
unintentionally if your palms contact the TouchPad as
you type (disabled by default).
Other features, such as mouse speed preferences and mouse trails,
are also found in the Mouse Properties window.
To access Mouse Properties:
»
3–4
Select Start > Control Panel > Mouse icon.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Using Hotkeys
Hotkeys are preset combinations of the fn key 1, one of the
function keys 2, or the esc key 3,
The icons on the f3, f4, and f8 through f10 keys represent the
hotkey functions. Hotkey functions and procedures are discussed
in the following sections.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–5
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Hotkey and Shortcut Key Quick Reference
Function
Key combination to
activate function
Key combination to
deactivate function
Initiate Standby
fn+f3
Power/standby switch
Switch between tablet
PC display and external
display
fn+f4
fn+f4
View battery information
fn+f8
fn+f8
Decrease screen
brightness
fn+f9
N/A
Increase screen
brightness
fn+f10
N/A
Display system
information
fn+esc
fn+esc
Initiating Standby (fn+f3)
When the tablet PC is on, press the fn+f3 hotkey to initiate
Standby. When Standby is initiated, your work is saved in random
access memory (RAM), the screen is cleared, and power is
conserved. While the tablet PC is in Standby, the standby light
and the power/standby light blink.
To exit Standby, press the power/standby switch to the right or
left.
The fn+f3 hotkey is set at the factory to initiate Standby. The
function of the fn+f3 hotkey, called the “sleep button” in
Windows, can be changed. For example, the fn+f3 hotkey can
be set to initiate Hibernation instead of Standby. For more
information about Standby, Hibernation, and changing the
function of the fn+f3 hotkey, refer to Chapter 2, “Power.”
3–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Switching Displays (fn+f4)
The fn+f4 hotkey switches the image among display devices
connected to the external monitor connector or the S-Video jack
on the tablet PC. For example, if an external monitor is connected
to the tablet PC, pressing the fn+f4 hotkey multiple times toggles
the image between the tablet PC display, the external monitor
display, and a simultaneous display on both the tablet PC and the
monitor.
Most external monitors receive video information from the tablet
PC using the external VGA video standard. The fn+f4 hotkey can
also toggle images among other devices receiving video
information from the tablet PC.
The following five video transmission types, with examples of
devices that use them, are supported by the fn+f4 hotkey:
■ LCD (tablet PC display)
■ External VGA (most external monitors)
■ S-Video (televisions, camcorders, VCRs, and video capture
boards with S-Video in jacks)
■
Composite video (televisions, camcorders, VCRs, and video
capture boards with composite-video in jacks)
■
DVI-D (external monitors that support the DVI-D interface)
can be connected to the tablet PC only when the notebook
✎ DVI-D
is docked in an optional docking device.
Viewing Battery Charge Information (fn+f8)
Press fn+f8 to display charge information for all installed battery
packs. The display indicates which battery packs are charging and
reports the amount of charge remaining in each battery pack.
Battery pack locations are indicated by number:
■
Location 1 is the primary battery pack.
■
Location 2 is the travel battery pack.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–7
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Decreasing Screen Brightness (fn+f9)
Press fn+f9 to decrease screen brightness. Hold down the hotkey
to decrease the brightness level incrementally.
Increasing Screen Brightness (fn+f10)
Press fn+f10 to increase screen brightness. Hold down the hotkey
to increase the brightness level incrementally.
Ambient Light Sensor (fn+f11)
Press fn+f11 to turn on and off the ambient light sensor. For more
information about the ambient light sensor, refer to the “Setting
the Ambient Light Sensor” section in this chapter.
Displaying System Information (fn+esc)
Press fn+esc to display information about system hardware
components and software version numbers. Press fn+esc a second
time to remove the system information from the screen.
system BIOS date is the version number of the system ROM.
✎ The
The BIOS date may display in a decimal format, such as
10/19/2002 F.07.
Using Hotkeys with External Keyboards
The hotkeys available for use with optional external keyboards
differ depending on the type of external keyboard you use. USB
keyboards support only the Hotkey functions controlled by the
Quick Launch Buttons control panel. For more information about
the Quick Launch Buttons control panel, refer to the “Quick
Launch Buttons Control Panel” section later in this chapter.
3–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
The following table describes how certain hotkeys and shortcut
keys are used on external keyboards:
Tablet PC Keys
External Keyboard Keys
scroll lock+scroll lock+f3 (PS/2
fn+f3
keyboards only)
scroll lock+scroll lock+f4 (PS/2
fn+f4
keyboards only)
scroll lock+scroll lock+f8
fn+f8
scroll lock+scroll lock+f9 (PS/2
fn+f9
keyboards only)
scroll lock+scroll lock+f10 (PS/2
fn+f10
keyboards only)
fn+f11
scroll lock+scroll lock+f11
fn+esc
scroll lock+scroll lock+esc
Keypads
The tablet PC has an embedded numeric keypad and also
supports an optional external keypad or an optional external
keyboard that includes a numeric keypad.
Using the Internal Keypad
The 15 keys of the embedded numeric keypad can be used like
the keys on an external numeric keypad. When the embedded
numeric keypad is turned on, each key on the keypad performs
the function indicated by the icon in the upper right corner of
the key.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–9
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Item
Component
fn key
num lock light
num lk key
Embedded numeric keypad
Enabling and Disabling the Embedded Numeric
Keypad
Press fn+num lk to enable the embedded numeric keypad. The
num lock light is turned on. Press fn+num lk again to return the
keys to their standard keyboard functions.
embedded numeric keypad does not work while an external
✎ The
keyboard or numeric keypad is connected to the tablet PC or to an
optional docking device.
3–10
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Switching Key Functions on the Embedded Numeric
Keypad
You can temporarily switch the functions of keys on the
embedded numeric keypad between their standard keyboard
functions and their keypad functions by using the fn key or the
fn+shift key combination.
■
To change the function of a keypad key to keypad functions
while the keypad is off, press and hold the fn key while
pressing the keypad key.
■
To use the keypad keys temporarily as standard keys while
the keypad is on:
❏ Press and hold the fn key to type in lowercase.
❏ Press and hold fn+shift to type in uppercase.
Using an External Keypad
Most keys on most external keypads function differently
according to whether num lock mode is on or off. For example:
■
When num lock is on, most keypad keys type numbers.
■
When num lock is off, most keypad keys function like the
arrow, page up, or page down keys.
When num lock on an external keypad is turned on, the num lock
light on the tablet PC is turned on. When num lock on an external
keypad is turned off, the num lock light on the tablet PC is turned
off.
If an external numeric keypad is connected, the embedded
numeric keypad cannot be turned on.
Enabling or Disabling Num Lock Mode As You Work
To turn num lock on or off on an external numeric keypad as you
work, press the num lk key on the external numeric keypad, not on
the tablet PC.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–11
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Enabling or Disabling Num Lock Mode As You Work
To turn num lock on or off on an external keypad as you work,
press the num lk key on the external keypad, not on the tablet PC.
Using Presentation Mode
The Presentation mode button toggles Presentation mode on and
off. Turning Presentation mode on opens an application, folder,
file, or Web site that you specify. The image simultaneously
displays on the tablet PC screen and on an external device
connected to the external monitor port or S-Video out jack on the
rear panel, or to ports and jacks on an optional docking device.
When you first select the Presentation mode button, the
Presentation Settings dialog box displays. In this dialog box, you
can
3–12
■
Set the program to start when the button is pressed.
■
Choose a power scheme.
■
Choose whether you want to show the Presentation Settings
dialog box each time you press Presentation mode button.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
✎
■
If you do not select this option, each time you press the
Presentation mode button, the Presentation Settings dialog
box displays and you have to select Continue to open the
program, application, folder, file, or Web site you have
selected to start when the button is pressed.
Automatically switch to an external display.
You can modify the Presentation mode settings using the Quick
Launch Button control panel. Refer to “Setting Presentation
Mode Preferences” in this chapter for information on setting
Presentation mode settings.
Using Quick Launch Buttons
The tablet PC has two Quick Launch buttons that open frequently
used applications when you press them.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–13
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Item Component
Description
Presentation mode button
HP Information Center button content to come.
Starts Presentation mode, which
optimizes for an external monitor or
projects and opens a user-defined
program such as Microsoft
PowerPoint.
Quick Launch Buttons Control Panel
You can use the Quick Launch Buttons control panel to
■
Change Presentation mode settings.
■
Set advanced preferences, including
❏ Setting preferences for the display of the Quick Launch
Buttons icon.
❏ Setting preferences for the ambient light sensor.
The following sections provide instructions for setting
preferences within the control panel. For additional on-screen
information about any item on the control panel, select the help
button in the upper-right corner of the window. The help button is
identified by a question mark icon.
Accessing the Quick Launch Buttons Control
Panel
You can access the Quick Launch Buttons control panel from the
Start button or from an icon that you can display in the
notification area (at the far right of the taskbar) or Windows
desktop. To access the Quick Launch Buttons control panel from
the Start button:
»
3–14
Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Setting Presentation Mode Preferences
Setting the Presentation Mode Button
To set an application, folder, file, or Web site to start when the
Presentation mode button is pressed:
1. Open the Quick Launch Buttons control panel:
❏ Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
- or ❏ Select the Quick Launch Buttons icon in the notification
area (at the far right of the taskbar) or Windows desktop.
2. Select the Presentation tab.
3. In the box under Program to Start, add the application, folder,
file, or Web site you want to start when the Presentation mode
button is pressed, or select Browse to view available
applications, folders, files, or Web sites.
4. To save your preferences and close the display, select OK.
Changing the Power Scheme
By default the Presentation power scheme is selected when the
Presentation mode button is pressed. To change the power
scheme:
1. Open the Quick Launch Buttons control panel:
❏ Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
- or ❏ Select the Quick Launch Buttons icon in the notification
area (at the far right of the taskbar) or Windows desktop.
2. Select the Presentation tab.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–15
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
3. Select an option from the drop-down list box, or select Power
Options to open the Microsoft Power Options control panel
to view or change the current power scheme.
4. To save your preferences and close the display, select OK.
Showing the Welcome Screen
You can choose to show the Quick Launch Buttons Properties
dialog box each time you press the Presentation mode button. By
default, this option is turned off.
To turn it on select the check box next to Show Welcome Screen
when Presentation mode button is pressed.
Switching to an External Display
By default, the Automatically switch to external display setting in
the Presentation tab is not selected. When you press the
Presentation mode button, the application, folder, file, or Web site
you selected in the Program to Start setting opens.
If you select the Automatically switch to external display
setting and press the Presentation mode button, the display is
switched to the external display connected to your tablet PC and
the application, folder, file, or Web site you selected in the
Program to Start setting opens.
can toggle between displays by pressing the Presentation
✎ You
mode button.
3–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Setting Advanced Preferences
You can set the icon and ambient light sensor in the Quick
Launch Button control panel.
Displaying the Quick Launch Buttons Icon
To show or hide the Quick Launch Buttons Properties icon in the
notification area (at the far right of the taskbar) or your Windows
desktop:
1. Open the Quick Launch Buttons control panel:
❏ Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
- or ❏ Select the Quick Launch Buttons icon in the notification
area (at the far right of the taskbar) or Windows desktop.
2. Select the Advanced tab. On the Advanced tab you can
❏ Display or hide the Quick Launch Buttons icon in the
notification area (at the far right of the taskbar), or on the
desktop.
◆
To display the icon, select the Show icon on the
taskbar or Show icon on the desktop check box.
◆
To hide the icon, clear the Show icon on the taskbar
or Show icon on the desktop check box.
3. To save your preferences and close the display, select OK.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–17
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
Setting the Ambient Light Sensor
The tablet PC features a built-in light sensor that enables the
tablet PC to automatically adjust the screen brightness according
to the ambient lighting level. When the lighting of your
environment changes, the ambient light sensor detects the change
and automatically adjusts the screen brightness.
You can turn the ambient light sensor on and off in 3 ways:
■
By pressing fn+f11
■
Through the Quick Launch Buttons control panel
■
By the Quick Launch Buttons control panel icon in the
notification area (at the far right of the taskbar) or Windows
desktop.
turn on and off the ambient light sensor using the Quick
✎ ToLaunch
Buttons control panel or the Quick Launch icon, the
Quick Launch Buttons software must be installed.
To turn the ambient light sensor on and off using the ambient light
sensor hotkeys, press fn+f11.
3–18
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
You can turn on and off the ambient light sensor using the Quick
Launch Buttons software:
1. Open the Quick Launch Buttons software:
❏ Select Start > Control Panel > Quick Launch Buttons.
-or❏ Select the Quick Launch Buttons icon in the notification
area (at the far right of the taskbar) or Windows desktop.
2. Select the Advanced tab.
3. Select or clear the Enable Ambient Light Sensor check box.
4. Select Apply, and then select OK.
You can turn on and off the ambient light sensor using the Quick
Launch Buttons icon:
1. Right-click the Quick Launch Buttons icon in the
notification area (at the far right of the taskbar) or Windows
desktop.
2. Select Turn Ambient Light Sensor On or Turn Ambient
Light Sensor Off.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
3–19
DRAFT Revised: 8/24/04
File: Chap3.fm
PN: HP-367186-001
Pointing Devices and Keyboard
3–20
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
You can enter and access information on the tablet PC by voice
(supported in English only), pen, and command controls. This
chapter provides information about using the pen and command
controls.
Pen
You can write with the pen in pen-specific applications such as
the Tablet PC Input Panel, in all Microsoft Office applications,
and in most other Windows applications and utilities. The
information you write on the screen with the pen can be filed,
searched, and shared among most Windows applications.
■
To access basic information about using the pen within the
operating system, refer to the printed Windows XP Tablet PC
Edition Start Here guide included with the tablet PC.
■
To access on-screen tutorials which include more detailed
information about using the pen in the tablet PC system:
1. Open Windows Explorer. To open Windows Explorer
from the Start button, select Start > All Programs >
Accessories > Windows Explorer.
2. In Windows Explorer, select My Computer > Local
Disk (C:) > WINDOWS > Help > latute.hta.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–1
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Entering Information with the Pen
Identifying the Pen Tip and Pen Button
The pen interacts with the tablet PC whenever the tip of the
pen 1 is within 1.27 cm (0.5 inch) from the screen. The pen
button 2 emulates the functions of the right-click button on an
external mouse.
Holding the Pen
Hold the pen as if you were writing with a standard pen or pencil.
Position your hand on the pen so that you will not accidentally
press the pen button.
As you monitor the movements of the pen, focus on the pointer,
not on the tip of the pen.
4–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Performing Mouse Clicks with the Pen
To select an item on the screen as you would with the left button
of an external mouse:
»
Tap the item with the tip of the pen.
To double-click an item on the screen as you would with the left
button of an external mouse:
»
Tap the item twice with the tip of the pen.
To select an item as you would with the right button of an
external mouse:
»
Press and hold down the pen button, then tap the item with
the tip of the pen.
Performing Other Procedures with the Pen
In addition to emulating mouse clicks, the pen can be used for the
following tasks:
■
To display the pointer location, hold the pen tip immediately
over any location on the tablet PC screen without touching
the screen with the pen tip.
■
To display the menu options related to an item on the screen,
tap the screen with the pen tip.
■
To write with the pen, write on the screen with the tip of
the pen.
■
To press a pen-activated button, tap the button with the
tip of the pen.
Pressure-Sensitivity
The tablet PC pen is equipped with a pressure-sensitive feature.
This means that you can manipulate the pen to create lines of
various thickness, depending upon the amount of pressure you
use to write.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–3
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Calibrating the Pen
The pen can function at the default calibration or at a calibration
set by another user. However, HP highly recommends that you
use the pen only while it is calibrated to your personal
handwriting and mouse action motions. Calibration optimizes pen
performance for all users and particularly for left-handed users.
To calibrate the pen:
1. Select Start > Control Panel > Printers and Other
Hardware > Tablet and Pen Settings > Settings tab.
2. Select Calibrate.
3. Follow the instructions on the screen.
❏ Tap the pen in the exact center of each of the calibration
markers. The calibration markers are displayed on the
screen as plus signs (+).
❏ Be sure to calibrate the pen for use in both portrait and
landscape orientations.
can display information about any setting in the Tablet and
✎ You
Pen Settings window by selecting the question mark button in
the upper right corner of the window, then selecting a setting.
A definition, explanation, or procedure is displayed.
4–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Using the Pen Holder
To protect the pen when you are not using it, insert the pen,
tip first, into the pen holder on the tablet PC.
Setting Pen Preferences
Pen preferences are set in the Tablet and Pen Settings window of
the operating system. The preferences include settings that
optimize handwriting recognition and the location of on-screen
menus for either right-handed or left-handed users. To access the
pen settings:
»
Select Start > Control Panel > Printers and Other Hardware
icon > Tablet and Pen Settings window > Pen Options tab.
The preferences you set in the Tablet and Pen Settings window
are specific to the pen and the tablet PC.
Pointing device preferences, such as pointer speed, click speed,
and mouse trails, that apply to any pointing device in the system,
are set in the Mouse Properties window. For instructions, refer to
Chapter 3, “Pointing Devices and Keyboard.”
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–5
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Command Controls
The 5 command controls enable you to enter commands usually
entered with keyboard keys while you are using the tablet PC
without an external keyboard. The command controls can also be
used while you are using the on-screen keyboard or an optional
keyboard.
Identifying Command Controls
Component
Description
1 Tablet PC Input Panel
launch button
2 Q Menu button
3 Rotate button
4 Windows Security button
5 Jog dial
4–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Command Controls Quick Reference
The following table identifies the default setting and activation
procedure for each command control.
■
To activate a pen-activated button, tap the button with the
tip of the pen.
■
To activate a manually activated button, press and release
the button.
Button
Default Function
Activation
Tablet PC
Input Panel
launch button*
Opens and closes the Tablet PC Input
Panel application, which includes a
writing pad and the on-screen
keyboard.
Pen
Rotate button*
Switches the image between
landscape and portrait orientation.
Pen
Q menu
button*
Opens and closes the Q Menu.
Pen
Windows
Security
button*
In Windows, functions like the
ctrl+alt+delete command on a
standard keyboard.
In the Setup utility, functions like the
reset button on some computers.
Manual
Jog dial*
Enters commands or scrolls the
image upward or downward.
Manual
*These controls are programmable. For instructions, refer to “Setting
Command Control Preferences,” later in this chapter.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–7
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Using Command Controls
Tablet PC Input Panel Launch Button
Tap the Tablet PC Input Panel launch button with the pen tip
when the tablet PC is in Windows to open the Tablet PC Input
Panel application. The Tablet PC Input Panel application displays
a keyboard on the screen and can also display a writing pad,
which supports handwriting.
To enter the ctrl+alt+delete command, press the Windows
Security button on the tablet PC with the pen tip or a small object
like the end of a paper clip.
Rotate Button
Tap the rotate button with the pen tip when the tablet PC is in
Windows to rotate the image on the screen 90 degrees. For
example, if the image is in landscape orientation, tap the rotate
button to rotate the image to portrait orientation.
Q Menu Button
Press the Q menu button manually when Windows is running to
open or close the Q Menu. The Q Menu provides quick access to
programmable tasks and destinations including:
■
System controls, such as volume and screen brightness.
■
Key simulations such as Capture Screen, which functions like
the print screen key on a standard keyboard.
■
Applications, files, or folders on a drive, a network, or the
Internet.
To select an item from the Q Menu without using the pen or a
keyboard, press the Q menu button to display the Q Menu, rotate
the jog dial upward or downward until your selection is
highlighted, then press the jog dial inward.
For more information about using the Q Menu, refer to Chapter 7,
“Q Menu Software.”
4–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Windows Security Button
Press the Windows Security button with the pen tip or a small
object like the end of a paper clip to enter the ctrl+alt+delete
command while you are in Windows or the reset command while
you are in the Setup utility.
Ctrl+Alt+Delete Command
When the tablet PC is in Windows, the Windows Security button
clears your work from the screen and displays the Windows
Security window in which you can lock, log off, or shut down the
tablet PC, initiate Standby or Hibernation, or open Task Manager.
■
The Shut Down option in the ctrl+alt+delete window enables
you to safely shut down the tablet PC if the system has
become unresponsive.
■
Task Manager displays the status of all open applications and
enables you to close an application that has become
unresponsive.
If the system remains unresponsive after selecting Shut Down in
the Windows Security window, slide and hold the power switch
for 4 seconds. For additional shut down procedures, refer to
Chapter 2, “Power.” For information about using the
ctrl+alt+delete command in non-Windows applications, refer to
the application documentation.
Reset Command
When the Setup utility is open, the Windows Security button
simulates the reset button found on some computers. When the
tablet PC is reset, the tablet PC restarts and all unsaved
information is lost.
The reset function can be used to restore functionality when the
system has become unresponsive. For information about the
Setup utility, which is a non-Windows utility, refer to Chapter 11,
“Computer Setup.”
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–9
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Jog Dial
Press or rotate the jog dial manually to enter commands or scroll
vertically:
■
Press inward to simulate the function of the enter key on a
standard keyboard.
■
Rotate upward or downward to scroll toward the top or
bottom of an image.
At the default setting, the jog dial scrolls line by line like the up
and down arrow keys on a standard keyboard. The jog dial can be
set to scroll page by page like the page up and page down keys on
a standard keyboard or three lines at a time like a mouse wheel.
Other settings, in addition to scroll functions, are also available.
For instructions, refer to “Setting Command Control
Preferences,” next in this chapter.
4–10
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Setting Command Control Preferences
All command controls except the Display Toggle button and the
enter function of the jog dial can be customized to launch
applications, simulate key combinations, or perform preset
system functions.
Each programmable command control can be assigned to
4 settings. Each setting applies only to 1 of 4 views:
■
Portrait-Primary
■
Portrait-Secondary
■
Landscape-Primary
■
Landscape-Secondary
Command control preferences are set in the Tablet and Pen
Settings window. You must select a view before setting a
preference. Each view is illustrated in the Button Location pane
of the Tablet and Pen Settings window as you select it.
If you are unfamiliar with the four views, you may want to read
“Selecting a View” next in this section, before setting a command
control preference.
Selecting a View
In the Portrait-Primary and Portrait-Secondary views, the image
is displayed vertically, in portrait orientation. In the LandscapePrimary and Landscape-Secondary views, the image is displayed
horizontally, in landscape orientation.
■
A portrait view is often optimal when you are using the
tablet PC as a handheld.
■
A landscape view is often optimal when you are displaying
the image on an optional external monitor or projector.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–11
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
In the primary views (Portrait-Primary and Landscape-Primary),
the image switches clockwise between vertical and horizontal.
In the secondary views (Portrait-Secondary and LandscapeSecondary), the image switches counterclockwise between
vertical and horizontal.
■
Left-handed users may find the secondary views more
convenient.
■
HP recommends that you not use a secondary view
while using the internal wireless. The positions commonly
occupied by the tablet PC, external devices, and users while
the tablet PC is in a secondary view may obstruct the
antennas.
When you are facing the tablet PC screen with the tablet PC
in portrait orientation, the antennas, not visible from the
outside of the tablet PC, are on the right and left sides of the
tablet PC, near the upper corners.
To switch the system among the Portrait-Primary, LandscapePrimary, Portrait-Secondary, and Landscape-Secondary views:
1. Press the Q menu button.
2. Select a view from the Q Menu. (The system switches to the
view you select.)
For more information about using the Q Menu, including
instructions for adding or removing items from the Q Menu,
refer to Chapter 7, “Q Menu Software.”
4–12
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
Assigning or Changing a Preference
To assign or change the function of a programmable command
control:
1. Select Start > Control Panel > Printers and Other
Hardware > Tablet and Pen Settings > Tablet Buttons tab.
2. In the Button Settings For field, select the view in which you
want to use your preference. (The view is illustrated in the
Button Location panel.)
3. In the Tablet Button drop-down list, select the button you
plan to assign.
❏
To assign or change the function of rotating the jog dial
upward, select Up.
❏
To assign or change the function of rotating the jog dial
downward, select Down.
4. Select Change. (The Button Action dialog box opens.)
5. Select your preference in the Button Action dialog box.
To save your preference, select OK or Apply.
Returning All Command Controls to Default Settings
To return the settings on all command controls to their default
settings:
1. Select Start > Control Panel > Printers and Other
Hardware > Tablet and Pen Settings > Tablet Buttons tab.
2. In the Button Settings For field, select the view in which you
want to change all command controls to their default settings.
3. Select Reset. (All command controls are returned to their
default settings only in the orientation currently selected.)
4. Select Apply, and then select OK.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
4–13
DRAFT Revised: 8/24/04
File: Chap4.fm
PN: HP-367186-001
Pen and Command Controls
On-Screen Keyboard
The Tablet PC Input Panel application displays a keyboard on the
screen. This on-screen keyboard simulates the functions of an
optional keyboard.
To open the Tablet PC Input Panel application, tap the Tablet PC
Input Panel launch button 1 with the pen.
■
To type, tap a key.
■
To switch the keys displayed in the top row between number
keys and function keys, tap Func.
■
To enter the ctrl+alt+delete command, press the Windows
Security button 2 on the tablet PC with the pen tip or a small
object like the end of a paper clip. To protect your work and
the system, the ctrl+alt+delete command cannot be entered
using the Ctrl, Alt, and Del keys on the on-screen keyboard.
For more information about using the Tablet PC Input Panel
application, refer to the“Tablet PC Input Panel Launch Button”
section earlier in this chapter.
4–14
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
Using Audio Features
The following figure and table describe the audio features of the
tablet PC.
Component
Description
1 Volume mute button
Turns off tablet PC sound.
2 Volume down button
Decreases tablet PC sound.
3 Volume up button
Increases tablet PC sound.
4 Internal microphone
Records sound.
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
5–1
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
Component
Description
5 Audio-out (headphone) jack
Produces system sound when
connected to optional powered stereo
speakers, headphones, headset, or
television audio.
6 Audio-in (microphone) jack
Connects an optional monaural or
stereo microphone.
7 Speaker
Produces tablet PC sound.
Using the Audio-In (Microphone) Jack
The tablet PC is equipped with a stereo microphone jack. When
connecting a microphone to the microphone jack, use a
microphone with a 3.5-mm plug.
■
If you connect a stereo (dual-channel) microphone, stereo
sound will be recorded.
■
If you connect a monaural (single-channel) microphone,
left-channel sound will record on both channels.
■
If you connect a dynamic microphone, the recommended
sensitivity may not be achieved.
an external microphone is connected to the tablet PC, the
✎ When
tablet PC internal microphone is disabled.
Using the Audio-Out (Headphone) Jack
Å
WARNING: To reduce the risk of personal injury, adjust the volume
before putting on headphones or a headset.
Ä
CAUTION: To prevent possible damage to an external device, do not
plug a single sound channel (monaural) connector into the headphone
jack.
5–2
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
The stereo (dual-channel) headphone jack is used to connect
headphones, and also to connect the audio function of an
audio/video device such as a television or VCR.
When connecting a device to the headphone jack:
■
Use only a 3.5-mm stereo plug.
■
For best sound quality, use 24-ohm to 32-ohm headphones.
■
The internal speaker is disabled.
Adjusting the Volume
To adjust the volume, use any of the following controls:
■
Tablet PC volume buttons
❏ To mute or restore volume, press the volume mute button.
You can also mute or restore volume by pressing the
volume down and volume up buttons simultaneously.
❏ To decrease the volume, press the volume down button.
❏ To increase the volume, press the volume up button.
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
5–3
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
■
Windows volume control:
1. Click the Volume icon in the notification area (at the far
right of the taskbar).
2. Increase or decrease the volume by moving the slider up
or down. (You can also select the check box next to Mute
to mute the volume.)
- or 1. Double-click the Volume icon.
2. In the Volume Control column, increase or decrease the
volume by moving the Volume slider up or down. You can
also adjust the balance or mute the volume.
✎ Volume can also be adjusted within some applications.
If the Volume icon is not in the notification area, follow the
steps below to place it in the notification area.
1. Select Start > Control Panel > Sounds, Speech, and
Audio Devices > Sounds and Audio Devices.
2. Select the Volume tab.
3. Select the check box for Place volume icon in the
taskbar.
4. Select Apply.
Using Video Features
The tablet PC features a 7-pin, dual-purpose S-Video out jack that
connects the tablet PC to an optional S-Video device, such as a
television, VCR, camcorder, overhead projector, or video capture
card, using an optional, standard (4-pin) S-Video cable. The
S-Video out jack features 3 extra pins that enable an optional
S-Video– to–composite adapter to be used with the tablet PC.
5–4
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
The tablet PC can support one S-Video device connected to the
S-Video out jack while simultaneously supporting an image on
the tablet PC display and on any other supported external display.
The S-Video connection usually provides an image of higher
quality than a composite-video connection provides.
To transmit video signals through the S-Video out jack, you need
an S-Video cable, available from most electronics retailers. If you
are combining audio and video functions, such as playing a movie
from a DVD in an optional MultiBay drive to a television, you
also need a standard audio cable, available from most electronics
retailers.
Using the S-Video Out Jack
To connect a video device to the S-Video out jack:
1. Plug either end of the S-Video cable into the S-Video out jack
on the tablet PC.
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
5–5
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
2. Connect the other end of the cable to the video device, as
instructed in the documentation included with the device.
S-Video out jack on the tablet PC is not accessible because
✎ Ifthethetablet
PC is docked into an optional docking device, you can
connect the device to the S-Video out jack on the docking device.
Connecting a Monitor or Projector
To connect an external monitor or projector to the tablet PC,
insert the monitor cable into the external monitor port on the back
of the tablet PC.
a properly connected external monitor or projector does not
✎ Ifdisplay
an image, try pressing the fn+f4 hotkey to switch the
image to the monitor. You can toggle between displays by
pressing the Presentation mode button.
5–6
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
Using CD and DVD Software
The following software is supported for use with the tablet PC:
■
Windows Media Player—Plays audio CDs and video DVDs
and copies audio and data CDs. This software is included
with the Windows operating system.
■
InterVideo WinDVD—Plays video CDs and DVD movies.
This software is preinstalled on select tablet PCs. You can
also obtain this software by any of the following methods:
❏ Install WinDVD from the Driver Recovery disk provided
with most HP tablet PCs.
❏ If you do not have the Driver Recovery disk, refer to the
Worldwide Telephone Numbers booklet included with
your tablet PC to contact Customer Care for a copy of the
Restore solution for you tablet PC.
❏ Download the software from the HP Web site:
http://www.hp.com
■
InterVideo WinDVD Creator Plus—Provides the ability to
create, edit and burn movies to a DVD or video CD. This
software is located on the InterVideo WinDVD Creator CD,
included with select tablet PCs.
■
Sonic RecordNow!—Enables you to create copies of data and
audio CDs and DVDs and create personalized audio CDs and
DVDs. RecordNow! is preinstalled on select tablet PCs.
Observing the Copyright Warning
It is a criminal offense, under applicable copyright laws, to make
unauthorized copies of copyright-protected material, including
computer programs, films, broadcasts, and sound recordings.
This tablet PC should not be used for such purposes.
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
5–7
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
Installing Software
To install software from a CD that is included with the tablet PC:
1. Insert an appropriate optical drive into an external MultiBay
or MultiBay II.
2. Connect the tablet PC to a reliable AC outlet.
3. Close any open applications.
4. Insert a software CD into the optical drive.
❏ If Autorun is enabled, an installation wizard is displayed.
❏ If Autorun is disabled, select Start > Run. Enter:
x:\setup.exe
(where x is your CD drive designation), and then select
OK.
5. When the installation wizard is displayed, follow the
installation instructions on the screen.
6. Restart the tablet PC if prompted.
the installation procedure for all software you want to
✎ Repeat
install.
Creator has special drive requirements for proper
✎ WinDVD
installation. To install WinDVD Creator, refer to the instructions
provided with the InterVideo WinDVD Creator CD.
5–8
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
Enabling AutoPlay
AutoPlay is an option in Windows that turns the Autorun feature
on or off. Autorun starts a program or plays a title on a disc as
soon as the disk is inserted into the drive and the drive door is
closed. By default, AutoPlay is enabled on the tablet PC.
To disable AutoPlay or to enable AutoPlay if the feature has been
turned off, refer to your operating system documentation or visit
the Microsoft Web site at: http://www.microsoft.com.
Installing the Universal Disc Format Reader
Some CDs or DVDs created with “drag-and-drop” software
might not initially run in the tablet PC you are using. The first
time you insert a CD or DVD formatted for drag-and-drop
software into the optical drive, you might be prompted to install
the Universal Disk Format (UDF) Reader. Discs formatted for
drag-and-drop software or created using drag-and-drop software
contain a copy of the UDF Reader.
To install the UDF Reader:
1. Insert the CD or DVD created with the drag-and-drop
software into the optical drive of the tablet PC.
2. Select Start > Run. Enter:
x:\udfinst.exe
(where x is the CD or DVD drive designation).
3. Select OK.
4. Follow the installation instructions on the screen.
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
5–9
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
Using Windows Media Player
Windows Media Player is included with the Windows operating
system. It can be used to play CDs and DVDs and create audio
and data CDs. To play a CD or DVD:
1. Insert the CD or DVD into the optical drive, and then close
the tray.
2. Wait several seconds, and then:
❏ If AutoPlay is enabled, Windows Media Player is opened.
❏ If Windows Media Player is not opened, select Start >
(All) Programs > Accessories > Entertainment >
Windows Media Player, and then select the Play button
to play the disc.
For additional instructions on using this application, select Help
on the Windows Media Player menu bar.
Using WinDVD Player
InterVideo WinDVD can be used to play video CDs and DVD
movies. To locate and install InterVideo WinDVD, refer to the
“Installing Software” section in this chapter.
To open WinDVD when AutoPlay has been disabled, select Start
> (All) Programs > InterVideo WinDVD > InterVideo
WinDVD.
For more information about using WinDVD, select Help on the
WinDVD menu bar.
Using WinDVD Creator Plus (Select Models
Only)
WinDVD Creator Plus can be used to create, edit, and burn
movies to a DVD or video CD. This software must be installed
from the InterVideo WinDVD Creator CD provided with select
tablet PCs.
5–10
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
WinDVD Creator Plus must be installed using a DVD/CD-RW or
DVD+RW/R and CD-RW Combo Drive only. If you do not use
one of the these drives, WinDVD Creator Plus will not be
installed.
For more information about WinDVD Creator Plus capabilities
and instructions on creating DVDs and Video CDs, refer to the
WinDVD Creator Plus online help after installing the software.
Using Sonic RecordNow!
Sonic RecordNow! can be used to create backups of data or audio
CDs or DVDs, transfer audio files from CDs to a hard drive, and
create personalized audio CDs. RecordNow! is preinstalled on
your tablet PC. For more information about RecordNow!
capabilities and for instructions on creating data and audio CDs
and DVDs, refer to the Sonic RecordNow! Tutorial and online
help.
Changing DVD Region Settings
Ä
CAUTION: The region settings on your DVD drive can only be changed
5 times.
■ The region setting you select the fifth time becomes the permanent
region setting on the DVD drive.
■ The number of allowable region changes remaining on the drive is
displayed in the Remaining Times Until Permanent field in the
WinDVD window. The number in the field includes the fifth and
permanent change.
Most DVDs that contain copyrighted files also contain region
codes. The region codes help protect copyrights internationally.
You can play a DVD containing a region code only if the region
code on the DVD matches the region setting on your DVD drive.
If the region code on a DVD does not match the region setting on
your drive, a Playback Of Content From This Region Is Not
Permitted message is displayed when you insert the DVD. To
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
5–11
DRAFT Revised: 8/10/04
File: Chap5.fm
PN: HP-367186-001
Multimedia
play the DVD, you must change the region setting on your DVD
drive. DVD region settings can be changed through the operating
system or through some DVD players.
Changing Settings Using the Operating System
To change settings through the operating system:
1. Open Device Manager by selecting Start > My Computer.
Right-click in the window and select Properties > Hardware
tab > Device Manager.
2. Select DVD/CD-ROM drives, right-click the DVD drive for
which you want to change region settings, and then select
Properties.
3. Make the desired changes on the DVD Region tab.
4. Select OK.
5. For additional information, refer to the Windows operating
system Help and Support.
Changing Settings Using WinDVD
To change the region settings on a drive using WinDVD:
1. Open WinDVD through one of the following methods:
❏ Select the WinDVD Player icon on the taskbar.
❏ Select Start > (All) Programs > InterVideo WinDVD >
InterVideo WinDVD.
2. Right-click the WinDVD player window.
3. Select Setup.
4. Select the button for the region, and then select your region.
5. Select OK.
Changing Settings Using Other DVD Software
To change region settings on a drive using a DVD player other
then WinDVD, refer to the documentation provided with the
player.
5–12
Hardware and Software Guide
hp CONFIDENTIAL
August 10, 2004 12:25 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
If your notebook is equipped with an integrated wireless device
such as 802.11 or Bluetooth wireless devices, you have a wireless
notebook.
■
An 802.11 wireless notebook can connect to wireless
networks in corporate offices, your home, and public places.
Wireless networks include wireless local area networks
(WLANs) or “hotspots.” Hotspots are wireless access points
available in public places, such as airports, restaurants, coffee
shops, hotels, and universities.
■
A Bluetooth wireless notebook can connect to other
Bluetooth wireless-enabled devices using a wireless personal
area network (PAN).
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–1
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Your notebook has a button that may be used to enable and
disable the 802.11 and Bluetooth wireless devices and an
associated light to indicate the state of the wireless devices. The
following illustration shows the wireless button 1 and light 2.
In addition to the wireless button and light, your notebook has
software controls that enable you to turn on, turn off, enable, and
disable your wireless devices. The following table explains the
software controls.
Wireless
Control
6–2
Description
Wireless
Assistant
Is a software utility that enables you to turn on and
off the 802.11 and Bluetooth wireless devices
individually. For more information on using Wireless
Assistant, refer to the “Turning On, Turning Off,
Enabling and Disabling the 802.11 Wireless and
Bluetooth Devices” section in this chapter.
Computer
Setup controls
Enable and disable the 802.11 and Bluetooth
wireless devices in Computer Setup. For more
information about using Computer Setup to control
the 802.11 and Bluetooth wireless devices, refer to
Chapter 9, “Computer Setup.”
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Wireless Local Area Network (Select
Models Only)
With the 802.11 wireless device, you can access a wireless local
area network (WLAN), which is composed of other computers
and accessories linked by a wireless router or a wireless access
point.
■
A large scale WLAN, such as a corporate WLAN or public
WLAN hotspot, typically use wireless access points, that can
handle a large number of computers and accessories and can
separate critical network functions.
■
A home or small office WLAN typically uses a wireless
router, which enables several wireless and wired computers to
share an Internet connection, a printer, and files without
additional pieces of hardware or software. Wireless access
point and wireless router are often used interchangeably.
Notebooks with 802.11 WLAN devices may support one or more
of three IEEE physical layer standards:
■
802.11a
■
802.11b
■
802.11g
There are three popular implementations of WLAN adapters:
■
802.11b only
■
802.11b/g
■
802.11a/b/g
802.11b, the first popular WLAN standard, supports data rates of
up to 11 Mbps and operates at a frequency of 2.4 GHz. 802.11g,
which came later, also operates at 2.4 GHz but supports data rates
of up to 54 Mbps. An 802.11g WLAN device is backward
compatible with 802.11b devices, so they can operate on the same
network. 802.11a supports data rates of up to 54 Mbps but
operates at a frequency of 5 GHz. 802.11a is not compatible with
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–3
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
802.11b and 802.11g. For information on identifying the type of
device in your notebook, refer to the “Identifying a WLAN
Device” section in this chapter.
Connecting Your Wireless Notebook to a
Corporate WLAN
Contact your network administrator or IT department for
information on connecting your notebook to your corporate
WLAN.
Connecting Your Wireless Notebook to a
Public WLAN
Contact your ISP or search the Web for a list of public WLANs
near you. Web sites that list public WLANs include Cisco
Hotspot Locator, Hotspotlist, and Geektools.
When you are within range of a public WLAN, a Wireless
Network Connection interactive message is displayed at the
bottom of the screen. Check with each public WLAN location for
cost and connection requirements.
6–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Setting Up a WLAN in Your Home
To set up a WLAN and connect to the Internet in your home, you
need the following equipment. The illustration below shows an
example of a completed wireless network installation that is
connected to the Internet. This wireless network includes
■
An optional broadband modem (either DSL or cable) and
high-speed Internet service purchased from an Internet
service provider (ISP) 1.
■
An optional wireless router (purchased separately) 2.
■
Your wireless notebook 3.
As this network grows, additional wireless and wired computers
can be connected to the network to access the Internet.
need technical assistance to install your WLAN, contact
✎ Iftheyourouter
manufacturer or your ISP.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–5
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Using a WLAN Connection
To use a WLAN connection:
■
Verify that all drivers required by the 802.11 wireless device
are installed and that the 802.11 wireless device is correctly
configured.
✎
If you are using an integrated 802.11 wireless device, all
required drivers are installed and the adapter is
preconfigured and ready for use.
■
If you are using an integrated 802.11 wireless device, verify
that the 802.11 wireless device is turned on. When the 802.11
wireless device is turned on, the wireless light is turned on. If
the wireless light is off, turn on the 802.11 wireless device.
Refer to the “Turning On, Turning Off, Enabling and
Disabling the 802.11 Wireless and Bluetooth Devices”
section.
■
For your home WLAN, verify that your router is correctly
configured. For instructions, refer to your router
documentation.
range for subsequent WLAN connections vary,
✎ Functional
depending on your notebook WLAN implementation, router
manufacturer, and interference from varying types of walls and
other electronic devices.
For more information about using a WLAN connection:
6–6
■
Refer to information from your ISP and the documentation
included with your wireless router and other WLAN
equipment.
■
Access the information and Web site links provided at
Start > Help and Support.
■
Refer to the documentation included with your notebook. The
Troubleshooting guide on the Notebook Documentation CD
contains a section about wireless LAN device problems and
resolutions.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Using Wireless Security Features
When you set up your own WLAN or access an existing WLAN,
always ensure that security features are protecting the WLAN. If
you do not enable security on your WLAN, an unauthorized
wireless user can access your notebook data and use your Internet
connection without your knowledge.
The most common security levels are Wi-Fi Protected Access
(WPA)-Personal and Wired Equivalent Privacy (WEP). In
addition to enabling WPA-Personal or WEP security encryption
on the router, you may want to use one or more of the following
security measures:
■
Change the default network name (SSID) and password.
■
Use a firewall.
■
Set security on your Web browser.
■
Enable MAC address filtering on the router.
For more information about WLAN security, refer to the HP Web
site at http://www.hp.com/go/wireless for details.
Installing Wireless Software (Optional)
Microsoft Windows XP supports WLAN configuration with the
Zero Client Configuration feature. HP provides a separate WLAN
configuration utility that must be installed if you plan to use
Cisco Compatible Extensions. Cisco Compatible Extensions
enable wireless devices to use Cicso-based WLANs.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–7
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Identifying a WLAN Device
To install HP WLAN software for an integrated 802.11 wireless
device, you need to know the name of the integrated 802.11
wireless device on your notebook. To identify an integrated
802.11 wireless device:
1. Display the names of all the 802.11 wireless devices on your
notebook:
a. Select Start > My Computer.
b. Right-click in the My Computer window.
c. Select Properties > Hardware tab > Device Manager >
Network Adapters.
2. Identify the 802.11 wireless device from the list that is
displayed:
❏ The listing for an 802.11 wireless device includes the term
wireless LAN, WLAN, or 802.11.
❏ If no 802.11 wireless device is listed, either your notebook
does not have an integrated 802.11 wireless device, or the
driver for the 802.11 wireless device is not properly
installed.
Accessing WLAN Software and Documentation
Your WLAN software is preloaded on your notebook and is
available in the Software Setup utility.
To install the WLAN software:
»
6–8
Select Start > All Programs > Software Setup, and then
follow the instructions on the screen. (When you are
prompted to select the software you want to install, select or
clear the corresponding check boxes.)
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
The WLAN software is also available as a SoftPaq at the HP Web
site. To access, download, and install the SoftPaq, use either of
the following procedures:
■
Select Start > Help and Support.
-or-
■
Visit the HP Web site at http://www.hp.com/support:
a. Choose your language and region.
b. Select the Download Drivers and Software radio button
c. Enter your computer model information, and then follow
the instructions provided at the Web site.
✎
WLAN software is provided in the Network category. To
access model information about your computer, refer to the
serial number label. The serial number label is on the
bottom of the notebook.
To access documentation for your WLAN software:
1. Install the WLAN software as instructed earlier in this
chapter.
2. Open the utility.
3. Select Help on the menu bar.
Troubleshooting 802.11 Wireless Devices
For more troubleshooting information, visit the HP Web site
(http://www.hp.com/go/wireless) or refer to the documentation
included with your notebook. The Troubleshooting guide on the
Notebook Documentation CD contains a section about wireless
LAN device problems and resolutions.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–9
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Bluetooth (Select Models Only)
The Bluetooth device provides short-range wireless
communications that replace the physical cable connections that
traditionally link electronic devices such as
■
Network access points.
■
Computers (desktop, notebook, PDA).
■
Phones (cellular, cordless, smart phone).
■
Imaging devices (printer, camera).
■
Audio devices (headset, speakers).
The devices are represented in the Bluetooth for Windows
software by graphical icons that resemble their physical features,
which makes them easily recognizable and distinguishes them
from other classes of devices.
The Bluetooth for Windows software provides the following
functions:
6–10
■
Personal Information Management (PIM) item
transfer—Sends and receives information files such as
business cards, calendar items, notes, and message items to
and from another Bluetooth computer or device.
■
PIM synchronization—Synchronizes PIM data between a
computer, PDA, or cell phone using Bluetooth.
■
File Transfer—Sends and receives files to and from another
Bluetooth computer.
■
Network access (Personal Area Networking Profile)—
Enables two or more Bluetooth devices to form an ad-hoc
(peer-to-peer) network. Provides a mechanism that enables a
Bluetooth device to access a remote network through a
network access point. The network access points can be
traditional LAN data access points or group ad-hoc networks
that represent a set of devices that are attached only to one
another.
■
Dial-up networking—Connects Bluetooth devices to the
Internet.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
■
Bluetooth serial port—Transfers data over the Bluetooth link
using a virtual COM port.
■
Hands-Free—Enables a vehicle-embedded, hands-free unit or
a notebook serving as a hands-free unit to establish a wireless
connection to a cellular phone and to act as the Bluetooth
cellular phone audio input and output mechanism.
■
Basic imaging—Provides a wireless connection between a
Bluetooth-enabled camera and other Bluetooth devices. The
camera can be controlled remotely by a notebook, and images
can be transferred from a camera to be stored on a computer
or to be printed.
■
Human interface device—Provides a wireless connection to
other Bluetooth devices, such as keyboards, pointing devices,
gaming devices, and remote monitoring devices.
■
Fax—Provides a Bluetooth connection that enables a
notebook to send or receive a fax message using a Bluetooth
cellular phone or modem.
■
Headset—Provides a wireless connection between a headset
and a notebook or cellular phone. The headset acts as the
device’s audio input and output mechanism and increases
mobility.
For more information about using Bluetooth with your notebook,
refer to the Wireless Documentation CD included with your
notebook.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–11
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Turning On, Turning Off, Enabling and
Disabling the 802.11 Wireless and
Bluetooth Devices
The wireless button 1 enables and disables 802.11 wireless and
Bluetooth devices in conjunction with Wireless Assistant. By
default, the 802.11 wireless and Bluetooth devices and wireless
light 2 are turned on when you turn on the notebook.
on a wireless device does not automatically create a
✎ Turning
WLAN or connect you to a WLAN. For information on setting up
a WLAN refer to the “Wireless Local Area Network (Select
Models Only)” section in this chapter.
The 802.11 wireless and Bluetooth devices have two power
states:
6–12
■
Enabled
■
Disabled
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
You can enable and disable the wireless devices in Computer
Setup. For more information about using Computer Setup to
control the 802.11 and Bluetooth wireless devices, refer to
Chapter 9, “Computer Setup.” You can also enable and disable
the wireless devices with the wireless button.
When the wireless devices are enabled in Computer Setup and
with the wireless button, you can use Wireless Assistant to turn
on and off the devices individually.
To view the state of your wireless devices, place the cursor over
the Wireless Assistant icon in the notification area, or open
Wireless Assistant by double-clicking the icon in the notification
area. Wireless Assistant displays the status of the devices as on,
off, or disabled. Wireless Assistant also displays the status of the
devices in Computer Setup as enabled or disabled.
For more information about Wireless Assistant:
1. Open Wireless Assistant by double-clicking the icon in the
notification area.
2. Select the Help button.
cannot use the wireless button or Wireless Assistant to
✎ You
control the wireless devices if they are disabled in Computer
Setup.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–13
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
Turning On the 802.11 Wireless and
Bluetooth Devices
If
And
■
Wireless Assistant
shows that both
WLAN and
Bluetooth are off
■
Wireless light is off
You want to turn on
either or both
devices
Then
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to turn
on.
✎
■
Wireless Assistant
shows that both
WLAN and
Bluetooth are
disabled*
■
Wireless light is off
■
Wireless Assistant
shows that one
device is on and the
other device is off
■
Wireless light is on
If the wireless
devices are turned
off, pressing the
wireless button
disables both
devices. The button
does not turn on the
devices.
You want to turn on
either or both
devices
1. Press the wireless button.
(The devices return to
their previous on or off
state.)
2. If the wireless devices are
turned off, right-click the
Wireless Assistant icon
in the notification area.
3. Select the device or
devices you want to turn
on.
You want to turn on
either or both
devices
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to turn
on.
*If the wireless devices are not both on when you disable the devices, pressing
the wireless button again returns the devices to their previous on or off state.
Pressing the button does not turn on both devices.
6–14
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
want your wireless devices to be turned on when you turn
✎ Ifonyou
your notebook, you must turn them on before you shut down
or restart.
Turning Off and Disabling the 802.11
Wireless and Bluetooth Devices
If
■
Wireless
Assistant
shows that
both WLAN
and Bluetooth
are on
■
Wireless light
is on
■
Wireless
Assistant
shows that
both WLAN
and Bluetooth
are off
■
Wireless light
is off
■
Wireless
Assistant
shows that one
device is on
and the other
device is off*
■
And
Then
You want to disable both
devices
Press the wireless button.
You want to turn off either
or both devices
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to turn
off.
You want to disable both
devices
Press the wireless button.
You want to disable both
devices
Press the wireless button.
You want to turn off both
devices.
Wireless light
is on
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to
turn off.
*If the wireless devices are not both on when you disable the devices, pressing
the wireless button again returns the devices to their previous on or off state.
Pressing the button does not turn on both devices.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
6–15
DRAFT Revised: 8/24/04
File: Chap6.fm
PN: HP-376186-001
Wireless
6–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:01 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Q Menu
The Q Menu provides quick access to many of the system tasks
accessed with the buttons, keys, or hot keys found on most tablet
PCs.
You can program the Q Menu to access alternative system tasks
or to any item on a drive, a network, or the Internet.
Identifying Q Menu Controls
The jog dial 1 and the Q Menu button 2 are used in Q Menu
procedures.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–1
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Displaying and Closing the Q Menu
The Q Menu can be displayed or closed at any time by using any
of the following procedures:
■
To display the Q Menu, press the Q Menu button or select the
Q icon in the notification area (at the far right of the taskbar).
If the Q icon is not displayed in the notification area (at the
far right of the taskbar):
1. Press the Q Menu button.
2. Select Q Menu Settings.
3. Select the Display Q Menu Icon On System Tray
check box.
7–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
4. Select OK.
If the icon is not displayed, select Show Hidden Icons in the
notification area (at the far right of the taskbar).
■
To close the Q Menu, press the Q Menu button or select
anywhere outside of the Q Menu.
For information about setting a pen-activated button to open
and close the Q Menu, refer to Chapter 4, “Pen and Command
Controls.”
Selecting an Item from the Q Menu
The items on the Q Menu can be selected with the jog dial, the
pen, an external mouse, or the pointing devices.
To select an item with the jog dial, rotate the jog dial upward or
downward to scroll vertically through the items, then press the
jog dial inward to select an item.
Obtaining Information About
System-Defined Items
To display a description of a system-defined Q Menu item or
to test any Q Menu item by executing the item command:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. On the Items to Display On Q Menu list:
❏ To display a description of a system-defined item,
select the item. (A description is displayed in a panel
beneath the list.) User-defined items are not described.
❏ To test any item by executing the item command,
select the item, and then select Execute.
Procedures for using all system-defined items are provided in the
“Using a System-Defined Item” section, later in this chapter.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–3
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Setting Q Menu Preferences
The Q Menu can display up to 40 items. Several system-defined
items are displayed by default. Additional system-defined and
user-defined items can be added. All items, including the default
items, can be removed.
The items on the Q Menu are managed from the Items to Display
On Q Menu list.
Accessing the Items to Display on Q Menu List
The Items to Display on Q Menu list can be accessed at any time
by using either of the following procedures:
■
Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar), and then
select Q Menu Settings.
■
Select Start > Control Panel > Other Control Panel
Options > Q Menu Settings.
Removing a Q Menu Item
To remove an item from the Q Menu:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. On the Items to Display On Q Menu list, clear the check box
for the item you want to remove.
4. Select Apply > OK.
7–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Adding a Q Menu Item
An item must be displayed on the Items to Display On Q Menu
list before it can be added to the Q Menu.
The Q Menu and the Items to Display on Q Menu list can include
no more than 40 items. If the list currently contains 40 items, the
Add button is dimmed and unavailable. If the Add button is
unavailable, you must remove a listed item before you can add the
new item.
Adding a Listed Item to the Q Menu
To add an item from the Items to Display On Q Menu list to the
Q Menu:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the check box for the item you want to add.
4. Select OK.
To display the Q Menu after adding the item, press the Q Menu
button or select the Q icon in the notification area (at the far right
of the taskbar).
Adding an Unlisted Item to the Q Menu
To add an item that is not on the Items to Display on Q Menu
list—for example, an item on a drive, network, or the
Internet—to both the Items to Display on Q Menu list and to
the Q Menu:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select Add.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–5
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
4. In the Add New Menu Entry window, you can add the item
by typing or by browsing:
❏ To add the item using the keyboard, type a name for the
item in the Display Name field and type the path to the
item in the File Name field. If you prefer to type the
Display Name, but browse for the File Name, leave the
File Name field blank.
❏ To add an item by browsing, select the Browse button next
to the File Name field.
❏ In the window, select the item. (The full name of the item
is displayed in the File Name field and, if you did not type
a name earlier in the Display Name field, a Display Name
is generated from the item name and displayed in the
Display Name field.)
5. To confirm your preference(s), select Apply > OK.
6. To close the Q Menu window, select OK.
To display the Q Menu after adding the item, press the Q Menu
button or select the Q icon in the notification area (at the far right
of the taskbar).
Changing a User-Defined Item
User-defined items can be changed, but system-defined items
cannot be changed. If you select a system-defined item on the
Items To Display on Q Menu list, the Modify button is
unavailable.
To change the Display Name and/or File Name of a
user-defined item:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the item on the Items To Display On Q Menu list.
7–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
4. Select Modify.
❏ To change the Display Name or File Name of the item
using the keyboard, type the new name for the item in the
Display Name field or type the new path to the item in the
File Name field. If you prefer to type the Display Name,
but browse for the File Name, leave the File Name field
blank.
❏ To change the Display Name or File Name by browsing,
select the Browse button beside the File Name field.
❏ In the window, select the item. (The full name of the item
is displayed in the File Name field and, if you did not type
a name earlier in the Display Name field, a Display Name
is generated from the item name and displayed in the
Display Name field.)
5. To confirm your preference(s), select Apply > OK.
6. To close the Q Menu window, select OK.
To display the Q Menu after changing a Display and/or File
Name, press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
Repositioning a Q Menu Item
To change the location of an item on the Q Menu:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the item on the Items to Display On Q Menu list, then:
❏ To move the item upward, select the Move Up button.
❏ To move the item downward, select the Move Down
button.
4. To confirm your preference(s) and close the Q Menu window,
select Apply > OK.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–7
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Removing an Item from the Items to Display on
Q Menu List
System-defined items cannot be removed from the Items to
Display on Q Menu List. To remove a user-defined item:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the item you want to remove.
4. Select Remove.
5. To confirm your preference(s) and close the Q Menu window,
select Apply > OK.
Enabling Automatic Mode Change
Enabling automatic mode change allows the Q Menu software to
adjust the display orientation automatically. If you disable this
option, the orientation of the display will need to be manually
changed.
To enable automatic mode change:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the Enable Automatic Mode Change check box.
Allowing All Users to Configure Q Menu
This option allows all user accounts to reconfigure Q Menu.
When selected, this change is only applied to that user.
To enable automatic mode change:
1. Press the Q Menu button or select the Q icon in the
notification area (at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the Allow All Users to Configure Q Menu check box.
7–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Using a System-Defined Item
As shipped, the Q Menu displays only the items identified below
as default. All the items described below can be added or
removed from the Q Menu. For instructions, refer to “Setting Q
Menu Preferences,” earlier in this chapter.
Brightness (Default)
Select Brightness to display a pop-up window that enables you to
adjust screen brightness with the jog dial. After selecting your
preferences, select OK in the pop-up window.
Volume (Default)
Select Volume to display the operating system volume control
window.
Mute On/Off (Default)
If system volume is on, select Mute On/Off to mute system
volume. If system volume is muted, select Mute On/Off to
restore system volume.
Capture Screen
Select Capture Screen to copy the image currently displayed on
the tablet PC screen to the Windows clipboard.
To save or print the image, open an application which supports a
screen image, such as Microsoft Word or Microsoft Paint, then
paste the image.
For example, to copy the screen image into a Word document:
1. Select Capture Screen.
2. Open Word.
3. Place the pointer in the document where you want to paste
the image.
4. On the Word menu bar, select Edit > Paste.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–9
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Capture Window
Select Capture Window to copy the image of the currently active
window on the tablet PC screen to the Windows clipboard.
To save or print the image, open an application which supports a
screen image, such as Microsoft Word or Microsoft Paint, then
paste the image.
For example, to copy the an image of the currently active window
into a Word document:
1. Select Capture Window.
2. Open Word.
3. Place the pointer in the document where you want to paste
the image.
4. On the Word menu bar, select Edit > Paste.
Tablet Display (Default)
When an optional display device, such as an external monitor or
projector, is connected to the external monitor connector on the
tablet PC:
To display the image only on the tablet PC:
»
Select Tablet Display.
✎
7–10
Selecting Tablet Display turns off the Extended Desktop
option.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
External Display
When an optional display device, such as an external monitor or
projector, is connected to the external monitor connector on the
tablet PC:
To display the image only on the display device:
»
Select External Display.
✎
Selecting External Display turns off the Extended Desktop
option.
Dual Display (Default)
When an optional display device, such as an external monitor
or projector, is connected to the external monitor connector on
the tablet PC:
To display the image on the tablet PC and the display device:
»
Select Dual Display.
✎
Selecting Dual Display turns off the Extended Desktop
option.
Extended Desktop
The Extended Desktop option extends the display from the
tablet PC screen onto the external monitor screen. For example,
you could use the Extended Desktop item to display an entire
spreadsheet. The left side columns could be displayed on the
tablet PC screen and the right side columns could be displayed
on the external monitor.
When an optional external monitor is connected to the external
monitor connector on the tablet PC:
To turn on the Extended Desktop option:
»
Select Extended Desktop.
To turn off the Extended Desktop option:
1. Press the Q Menu button.
2. Select Tablet Display, External Display, or Dual Display.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–11
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Presentation Mode On/Off (Default)
Ä
CAUTION: Presentation mode is integrated with the Q Menu software.
If the Q Menu software is uninstalled or disabled, presentation mode
will not function.
Presentation mode is a desktop profile that provides the optimal
configuration for displaying a presentation, such as a
Microsoft PowerPoint presentation, on a projector or external
monitor while displaying speaker’s notes on the tablet PC.
If you cause the system to initiate a desktop video profile while
presentation mode is applied—for example, by docking or
undocking—you must reapply presentation mode.
To apply or reapply presentation mode:
»
Select Presentation Mode On.
To close presentation mode and return the system to the previous
desktop video profile:
»
Select Presentation Mode Off.
Portrait-Primary (Default)
To switch the image clockwise to portrait view from
landscape view:
»
Select Portrait-Primary.
Landscape-Primary (Default)
To switch the image clockwise to landscape view from
portrait view:
»
7–12
Select Landscape-Primary.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Portrait-Secondary
To switch the image counterclockwise to portrait view from
landscape view:
»
Select Portrait-Secondary.
The default Portrait-Primary item switches the image
clockwise to portrait view. Left-handed users may find the
Portrait-Secondary item, which switches the image
counterclockwise to portrait view, more convenient.
recommends that you not use the Portrait-Secondary view
✎ HP
while using the internal wireless. The positions commonly
occupied by the tablet PC, external devices, and the user while
the tablet PC is in the Portrait-Secondary view may obstruct the
antennas.
For exact antenna locations, refer to Chapter 1, “Tablet PC
Features.”
Landscape-Secondary
To switch the image counterclockwise to landscape view from
portrait view:
»
Select Landscape-Secondary.
The default Landscape-Primary item switches the image
clockwise to landscape view. Left-handed users may prefer to
use the Landscape-Secondary item, which switches the image
counterclockwise to landscape view.
recommends that you not use the Landscape-Secondary view
✎ HP
while using the internal wireless. The positions commonly
occupied by the tablet PC, external devices, and the user while the
tablet PC is in the Landscape-Secondary view may obstruct
the antennas.
For exact antenna locations, refer to Chapter 1, “Tablet PC
Features.”
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–13
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Standby
To initiate Standby:
»
Select Standby.
Hibernate
To initiate Hibernation if Hibernation is enabled:
»
Select Hibernate.
✎
Hibernation is enabled by default. If Hibernation is not
enabled, selecting Hibernate initiates Standby.
To verify that Hibernation is enabled:
»
Select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab.
If Hibernation is enabled, the Enable Hibernation check box is
selected.
Shut Down
To immediately close the operating system and shut down the
system:
»
Select Shut Down. You are not prompted to confirm this
action.
Power Controls
To open the operating system Power Options Properties window:
»
Select Power Controls.
Tablet PC Settings (Default)
To open the operating system Tablet and Pen Settings window:
»
7–14
Select Tablet PC Settings.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
Q Menu Settings (Default)
To open the Q Menu Settings window:
»
Select Q Menu Settings.
Tablet PC Button Driver
The tablet PC button driver allows you to customize the
pen-activated buttons and jog dial. You can program the buttons
to perform various functions or open specific programs. Each
button can be programmed to perform a different function for
each orientation, or to perform the same function for all
orientations.
To customize a tablet PC button:
1. Select Start > Control Panel > Printers and other
Hardware > Tablet and Pen Settings.
2. Select the Tablet Buttons tab.
3. Select the orientation for which you want to program the
button.
4. Select the button you want to program in the Tablet Button
column. The button is displayed in the Button location and
Detailed view areas of the Tablet Buttons tab.
5. To change the action associated with the button, select
Change. The Change Tablet Button Actions dialog box is
displayed.
6. In the Action drop-down box, select the action that you want
the button to perform.
7. Select OK.
8. Select Apply > OK on the Tablet and Pen settings dialog
box.
Ä
CAUTION: The tablet PC button driver is integrated with the Q Menu
software. If the Q Menu software is uninstalled or disabled, the button
driver will not function.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
7–15
DRAFT Revised: 8/24/04
File: Chap7.fm
PN: HP-367186-001
Q Menu Software
7–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
If your tablet PC is equipped with an integrated wireless device
such as 802.11 or Bluetooth wireless devices, you have a wireless
tablet PC.
■
An 802.11 wireless tablet PC can connect to wireless
networks in corporate offices, your home, and public places.
Wireless networks include wireless local area networks
(WLANs) or “hotspots.” Hotspots are wireless access points
available in public places, such as airports, restaurants, coffee
shops, hotels, and universities.
■
A Bluetooth wireless tablet PC can connect to other
Bluetooth wireless-enabled devices using a wireless personal
area network (PAN).
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–1
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Your tablet PC has a button that may be used to enable and
disable the 802.11 and Bluetooth wireless devices and an
associated light to indicate the state of the wireless devices. The
following illustration shows the wireless button 1 and light 2.
In addition to the wireless button and light, your tablet PC has
software controls that enable you to turn on, turn off, enable, and
disable your wireless devices. The following table explains the
software controls.
Wireless
Control
8–2
Description
Wireless
Assistant
Is a software utility that enables you to turn on and
off the 802.11 and Bluetooth wireless devices
individually. For more information on using Wireless
Assistant, refer to the “Turning On, Turning Off,
Enabling and Disabling the 802.11 Wireless and
Bluetooth Devices” section in this chapter.
Computer
Setup controls
Enable and disable the 802.11 and Bluetooth
wireless devices in Computer Setup. For more
information about using Computer Setup to control
the 802.11 and Bluetooth wireless devices, refer to
Chapter 11, “Computer Setup.”
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Wireless Local Area Network (Select
Models Only)
With the 802.11 wireless device, you can access a wireless local
area network (WLAN), which is composed of other computers
and accessories linked by a wireless router or a wireless access
point.
■
A large scale WLAN, such as a corporate WLAN or public
WLAN hotspot, typically use wireless access points, that can
handle a large number of computers and accessories and can
separate critical network functions.
■
A home or small office WLAN typically uses a wireless
router, which enables several wireless and wired computers to
share an Internet connection, a printer, and files without
additional pieces of hardware or software. Wireless access
point and wireless router are often used interchangeably.
Tablet PCs with 802.11 WLAN devices may support one or more
of three IEEE physical layer standards:
■
802.11a
■
802.11b
■
802.11g
There are three popular implementations of WLAN adapters:
■
802.11b only
■
802.11b/g
■
802.11a/b/g
802.11b, the first popular WLAN standard, supports data rates of
up to 11 Mbps and operates at a frequency of 2.4 GHz. 802.11g,
which came later, also operates at 2.4 GHz but supports data rates
of up to 54 Mbps. An 802.11g WLAN device is backward
compatible with 802.11b devices, so they can operate on the same
network. 802.11a supports data rates of up to 54 Mbps but
operates at a frequency of 5 GHz. 802.11a is not compatible with
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–3
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
802.11b and 802.11g. For information on identifying the type of
device in your tablet PC, refer to the “Identifying a WLAN
Device” section in this chapter.
Connecting Your Wireless Tablet PC to a
Corporate WLAN
Contact your network administrator or IT department for
information on connecting your tablet PC to your corporate
WLAN.
Connecting Your Wireless Tablet PC to a
Public WLAN
Contact your ISP or search the Web for a list of public WLANs
near you. Web sites that list public WLANs include Cisco
Hotspot Locator, Hotspotlist, and Geektools.
When you are within range of a public WLAN, a Wireless
Network Connection interactive message is displayed at the
bottom of the screen. Check with each public WLAN location for
cost and connection requirements.
8–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Setting Up a WLAN in Your Home
To set up a WLAN and connect to the Internet in your home, you
need the following equipment. The illustration below shows an
example of a completed wireless network installation that is
connected to the Internet. This wireless network includes
■
An optional broadband modem (either DSL or cable) and
high-speed Internet service purchased from an Internet
service provider (ISP) 1.
■
An optional wireless router (purchased separately) 2.
■
Your wireless tablet PC 3.
As this network grows, additional wireless and wired computers
can be connected to the network to access the Internet.
need technical assistance to install your WLAN, contact
✎ Iftheyourouter
manufacturer or your ISP.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–5
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Using a WLAN Connection
To use a WLAN connection:
■
Verify that all drivers required by the 802.11 wireless device
are installed and that the 802.11 wireless device is correctly
configured.
✎
If you are using an integrated 802.11 wireless device, all
required drivers are installed and the adapter is
preconfigured and ready for use.
■
If you are using an integrated 802.11 wireless device, verify
that the 802.11 wireless device is turned on. When the 802.11
wireless device is turned on, the wireless light is turned on. If
the wireless light is off, turn on the 802.11 wireless device.
Refer to the “Turning On, Turning Off, Enabling and
Disabling the 802.11 Wireless and Bluetooth Devices”
section.
■
For your home WLAN, verify that your router is correctly
configured. For instructions, refer to your router
documentation.
range for subsequent WLAN connections vary,
✎ Functional
depending on your tablet PC WLAN implementation, router
manufacturer, and interference from varying types of walls and
other electronic devices.
For more information about using a WLAN connection:
8–6
■
Refer to information from your ISP and the documentation
included with your wireless router and other WLAN
equipment.
■
Access the information and Web site links provided at
Start > Help and Support.
■
Refer to the documentation included with your tablet PC. The
Troubleshooting guide on the Tablet PC Documentation CD
contains a section about wireless LAN device problems and
resolutions.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Using Wireless Security Features
When you set up your own WLAN or access an existing WLAN,
always ensure that security features are protecting the WLAN. If
you do not enable security on your WLAN, an unauthorized
wireless user can access your tablet PC data and use your Internet
connection without your knowledge.
The most common security levels are Wi-Fi Protected Access
(WPA)-Personal and Wired Equivalent Privacy (WEP). In
addition to enabling WPA-Personal or WEP security encryption
on the router, you may want to use one or more of the following
security measures:
■
Change the default network name (SSID) and password.
■
Use a firewall.
■
Set security on your Web browser.
■
Enable MAC address filtering on the router.
For more information about WLAN security, refer to the HP Web
site at http://www.hp.com/go/wireless for details.
Installing Wireless Software (Optional)
Microsoft Windows XP supports WLAN configuration with the
Zero Client Configuration feature. HP provides a separate WLAN
configuration utility that must be installed if you plan to use
Cisco Compatible Extensions. Cisco Compatible Extensions
enable wireless devices to use Cicso-based WLANs.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–7
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Identifying a WLAN Device
To install HP WLAN software for an integrated 802.11 wireless
device, you need to know the name of the integrated 802.11
wireless device on your tablet PC. To identify an integrated
802.11 wireless device:
1. Display the names of all the 802.11 wireless devices on your
tablet PC:
a. Select Start > My Computer.
b. Right-click in the My Computer window.
c. Select Properties > Hardware tab > Device Manager >
Network Adapters.
2. Identify the 802.11 wireless device from the list that is
displayed:
❏ The listing for an 802.11 wireless device includes the term
wireless LAN, WLAN, or 802.11.
❏ If no 802.11 wireless device is listed, either your tablet PC
does not have an integrated 802.11 wireless device, or the
driver for the 802.11 wireless device is not properly
installed.
Accessing WLAN Software and Documentation
Your WLAN software is preloaded on your tablet PC and is
available in the Software Setup utility.
To install the WLAN software:
»
8–8
Select Start > All Programs > Software Setup, and then
follow the instructions on the screen. (When you are
prompted to select the software you want to install, select or
clear the corresponding check boxes.)
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
The WLAN software is also available as a SoftPaq at the HP Web
site. To access, download, and install the SoftPaq, use either of
the following procedures:
■
Select Start > Help and Support.
-or-
■
Visit the HP Web site at http://www.hp.com/support:
a. Choose your language and region.
b. Select the Download Drivers and Software radio button
c. Enter your computer model information, and then follow
the instructions provided at the Web site.
✎
WLAN software is provided in the Network category. To
access model information about your computer, refer to the
serial number label. The serial number label is on the
bottom of the tablet PC.
To access documentation for your WLAN software:
1. Install the WLAN software as instructed earlier in this
chapter.
2. Open the utility.
3. Select Help on the menu bar.
Troubleshooting 802.11 Wireless Devices
For more troubleshooting information, visit the HP Web site
(http://www.hp.com/go/wireless) or refer to the documentation
included with your tablet PC. The Troubleshooting guide on the
Tablet PC Documentation CD contains a section about wireless
LAN device problems and resolutions.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–9
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Bluetooth (Select Models Only)
The Bluetooth device provides short-range wireless
communications that replace the physical cable connections that
traditionally link electronic devices such as
■
Network access points.
■
Computers (desktop, tablet PC, PDA).
■
Phones (cellular, cordless, smart phone).
■
Imaging devices (printer, camera).
■
Audio devices (headset, speakers).
The devices are represented in the Bluetooth for Windows
software by graphical icons that resemble their physical features,
which makes them easily recognizable and distinguishes them
from other classes of devices.
The Bluetooth for Windows software provides the following
functions:
8–10
■
Personal Information Management (PIM) item
transfer—Sends and receives information files such as
business cards, calendar items, notes, and message items to
and from another Bluetooth computer or device.
■
PIM synchronization—Synchronizes PIM data between a
computer, PDA, or cell phone using Bluetooth.
■
File Transfer—Sends and receives files to and from another
Bluetooth computer.
■
Network access (Personal Area Networking Profile)—
Enables two or more Bluetooth devices to form an ad-hoc
(peer-to-peer) network. Provides a mechanism that enables a
Bluetooth device to access a remote network through a
network access point. The network access points can be
traditional LAN data access points or group ad-hoc networks
that represent a set of devices that are attached only to one
another.
■
Dial-up networking—Connects Bluetooth devices to the
Internet.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
■
Bluetooth serial port—Transfers data over the Bluetooth link
using a virtual COM port.
■
Hands-Free—Enables a vehicle-embedded, hands-free unit or
a tablet PC serving as a hands-free unit to establish a wireless
connection to a cellular phone and to act as the Bluetooth
cellular phone audio input and output mechanism.
■
Basic imaging—Provides a wireless connection between a
Bluetooth-enabled camera and other Bluetooth devices. The
camera can be controlled remotely by a tablet PC, and images
can be transferred from a camera to be stored on a computer
or to be printed.
■
Human interface device—Provides a wireless connection to
other Bluetooth devices, such as keyboards, pointing devices,
gaming devices, and remote monitoring devices.
■
Fax—Provides a Bluetooth connection that enables a tablet
PC to send or receive a fax message using a Bluetooth
cellular phone or modem.
■
Headset—Provides a wireless connection between a headset
and a tablet PC or cellular phone. The headset acts as the
device’s audio input and output mechanism and increases
mobility.
For more information about using Bluetooth with your tablet PC,
refer to the Wireless Documentation CD included with your tablet
PC.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–11
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Turning On, Turning Off, Enabling and
Disabling the 802.11 Wireless and
Bluetooth Devices
The wireless button 1 enables and disables 802.11 wireless and
Bluetooth devices in conjunction with Wireless Assistant. By
default, the 802.11 wireless and Bluetooth devices and wireless
light 2 are turned on when you turn on the tablet PC.
on a wireless device does not automatically create a
✎ Turning
WLAN or connect you to a WLAN. For information on setting up
a WLAN refer to the “Wireless Local Area Network (Select
Models Only)” section in this chapter.
The 802.11 wireless and Bluetooth devices have two power
states:
8–12
■
Enabled
■
Disabled
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
You can enable and disable the wireless devices in Computer
Setup. For more information about using Computer Setup to
control the 802.11 and Bluetooth wireless devices, refer to
Chapter 11, “Computer Setup.” You can also enable and disable
the wireless devices with the wireless button.
When the wireless devices are enabled in Computer Setup and
with the wireless button, you can use Wireless Assistant to turn
on and off the devices individually.
To view the state of your wireless devices, place the cursor over
the Wireless Assistant icon in the notification area, or open
Wireless Assistant by double-clicking the icon in the notification
area. Wireless Assistant displays the status of the devices as on,
off, or disabled. Wireless Assistant also displays the status of the
devices in Computer Setup as enabled or disabled.
For more information about Wireless Assistant:
1. Open Wireless Assistant by double-clicking the icon in the
notification area.
2. Select the Help button.
cannot use the wireless button or Wireless Assistant to
✎ You
control the wireless devices if they are disabled in Computer
Setup.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–13
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
Turning On the 802.11 Wireless and
Bluetooth Devices
If
And
■
Wireless Assistant
shows that both
WLAN and
Bluetooth are off
■
Wireless light is off
You want to turn on
either or both
devices
Then
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to turn
on.
✎
■
Wireless Assistant
shows that both
WLAN and
Bluetooth are
disabled*
■
Wireless light is off
■
Wireless Assistant
shows that one
device is on and the
other device is off
■
Wireless light is on
If the wireless
devices are turned
off, pressing the
wireless button
disables both
devices. The button
does not turn on the
devices.
You want to turn on
either or both
devices
1. Press the wireless button.
(The devices return to
their previous on or off
state.)
2. If the wireless devices are
turned off, right-click the
Wireless Assistant icon
in the notification area.
3. Select the device or
devices you want to turn
on.
You want to turn on
either or both
devices
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to turn
on.
*If the wireless devices are not both on when you disable the devices, pressing
the wireless button again returns the devices to their previous on or off state.
Pressing the button does not turn on both devices.
8–14
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
want your wireless devices to be turned on when you turn
✎ Ifonyou
your tablet PC, you must turn them on before you shut down
or restart.
Turning Off and Disabling the 802.11
Wireless and Bluetooth Devices
If
■
Wireless
Assistant
shows that
both WLAN
and Bluetooth
are on
■
Wireless light
is on
■
Wireless
Assistant
shows that
both WLAN
and Bluetooth
are off
■
Wireless light
is off
■
Wireless
Assistant
shows that one
device is on
and the other
device is off*
■
And
Then
You want to disable both
devices
Press the wireless button.
You want to turn off either
or both devices
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to turn
off.
You want to disable both
devices
Press the wireless button.
You want to disable both
devices
Press the wireless button.
You want to turn off both
devices.
Wireless light
is on
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or
devices you want to
turn off.
*If the wireless devices are not both on when you disable the devices, pressing
the wireless button again returns the devices to their previous on or off state.
Pressing the button does not turn on both devices.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
8–15
DRAFT Revised: 8/24/04
File: Chap8.fm
PN: HP-376186-001
Wireless
8–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Security Features Quick Reference
solutions are designed to act as deterrents. These
✎ Security
deterrents may not prevent a product from being mishandled or
stolen.
In addition to the Windows operating system security measures,
the tablet PC provides the following security features, most of
which can be configured in Computer Setup. For more
information, refer to Chapter 11, “Computer Setup” in this guide.
To Protect Against
Use This Security Feature
Unauthorized use of the tablet PC
Power-on password
Unauthorized access to the Computer
Setup utility (f10)
HP administrator password
Unauthorized access to the contents
of a hard drive
DriveLock
Unauthorized access to a Windows
user account
Optional smart cards
An enabled smart card can store the
Windows user and Windows
administrator passwords; therefore,
both the smart card and the smart
card PIN are required to access the
account.
✎
This security feature is
supported by only certain
smart card readers.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–1
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
To Protect Against
Use This Security Feature
Unauthorized access of data
Windows Firewall software
Unauthorized access to the BIOS
settings and other system
identification information
HP administrator password, which
protects the system information in
Computer Setup.
Unauthorized removal of the tablet
PC
Security cable slot (used with an
optional security cable)
For more information on the
security cable slot, refer to the
“Connecting an Optional Security
Cable” section in this chapter.
Setting Security Preferences in
Computer Setup
Most security preferences are set in Computer Setup. Because
Computer Setup is a non-Windows utility, it does not support the
pointing devices on your tablet PC. When using Computer Setup,
you must use the keys on your tablet PC to navigate and make
selections.
For more details, refer to Chapter 11, “Computer Setup.”
9–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Using Passwords
Ä
CAUTION: If you forget both your DriveLock user and DriveLock master
passwords, the hard drive is permanently locked and can no longer
be used.
Most security features use passwords. Whenever you set a
password, write down the password and store it in a secure
location away from the tablet PC.
■
If you forget your power-on password, you cannot start up the
tablet PC or restore from Hibernation until a service partner
resets the tablet PC. To contact a service partner, refer to the
Worldwide Telephone Numbers booklet included with the
tablet PC.
■
If you forget your HP administrator password, you will not be
able to access Computer Setup.
■
If you forget the DriveLock user password but know
your DriveLock master password, you can remove
DriveLock protection from the drive. For instructions, refer to
the “Using DriveLock” section in this chapter.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–3
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
HP and Windows Passwords
HP security features and Windows operating system security
features work independently from one another. For example,
a device disabled in Computer Setup cannot be enabled in
Windows.
HP passwords and Windows passwords are also independent of
one another. The following table lists the different passwords
used by HP and Windows and describes their functions.
HP Passwords*
Function
HP administrator password
Used to access Computer Setup.
Power-on password
Used to access the tablet PC during
Startup and when you restart the
tablet PC.
DriveLock user password
Used by the day-to-day user to access
drives protected by DriveLock at
startup.
DriveLock master password
Used by the HP administrator to
access drives protected by DriveLock
and to remove DriveLock protection
from the drive.
Smart card PIN
Stores the Windows administrator and
user passwords and is used to access
Windows during startup on tablet PCs.
Power-on and HP administrator
passwords can be stored on smart
cards if an optional smart card reader
supports this functionality.
*HP passwords must be enabled in Computer Setup. For more
information, refer to Chapter 11, “Computer Setup.”
9–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Windows Passwords
Administrator password
Used to log on to the tablet as the
Windows administrator after Windows
has been configured to prompt for a
password at startup.
User password
Used to log on to the tablet PC as
a user after Windows has been
configured to prompt for a password
at startup.
HP and Windows Password Guidelines
HP and Windows passwords are not interchangeable. You must
use an HP password at an HP password prompt and a Windows
password at a Windows password prompt. For example:
■
If a power-on password is set, the power-on password (not
a Windows password) must be entered when the tablet PC
starts up or restores from Hibernation.
■
If you set Windows to prompt for a password before
resuming from Standby, a Windows password (not a
power-on password) must be entered to resume from
Standby.
The same word or series of letters or numbers used for an HP
password can be used for another HP password or for a Windows
password, with these considerations:
■
HP passwords can be any combination of up to 32 letters and
numbers and are not case sensitive.
■
An HP password must be set and entered with the same type
of keys. For example, an HP password set with keyboard
number keys will not be recognized if it is entered with
embedded numeric keypad number keys. For information
about the embedded numeric keypad, refer to the “Keypads”
section in Chapter 3, “Pointing Devices and Keyboard.”
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–5
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Using Power-On Passwords
A power-on password prevents unauthorized use of the tablet PC.
After it is set, a power-on password must be entered each time the
tablet PC is turned on or restarted. A power-on password:
■
Does not display as it is set, entered, changed, or deleted.
■
Must be set and entered with the same keys. For example, a
power-on password set with keyboard number keys will not
be recognized if you enter it with keypad number keys.
■
Can include any combination of up to 32 letters and numbers
and is not case sensitive.
Setting Power-On Passwords
A power-on password is set, changed, or deleted in Computer
Setup. To manage the password:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
2. Use the arrow keys to select Security > Power-On
password, and then press enter.
9–6
❏
To set a power-on password, type the password in the
New Password and Verify New Password fields, and then
press f10.
❏
To change a power-on password, type the current
password in the Old Password field, type the new
password in the New Password and Verify New Password
fields, and then press f10.
❏
To delete a power-on password, type the current
password in the Old Password field, and then press f10.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
3. To save your preferences, use the arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Entering Power-On Passwords
At the power-on password prompt, type your password, and then
press enter. After 3 unsuccessful attempts to enter the password,
you must restart the tablet PC and try again.
Requiring a Power-On Password at Restart
You can require that a power-on password be entered each time
the tablet PC is restarted. Enable and disable this feature in
Computer Setup.
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
2. Use the arrow keys to select Security > Password options >
Require password on restart.
3. Toggle the field to enable or disable, and then press enter.
4. Save your preferences by using the arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–7
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Using HP Administrator Passwords
The HP administrator password protects the configuration
settings and system identification information in Computer Setup.
After it is set, this password must be entered to access Computer
Setup. The HP administrator password
■
Is not interchangeable with a Windows administrator
password, although both can use the same word or series
of letters, or numbers.
■
Does not display as it is set, entered, changed, or deleted.
■
Must be set and entered with the same keys. For example, an
HP administrator password set with keyboard number keys
will not be recognized if you enter it with embedded numeric
keypad number keys.
■
Can include any combination of up to 32 letters and numbers
and is not case sensitive.
Setting HP Administrator Passwords
An HP administrator password is set, changed, or deleted in
Computer Setup. To manage the password:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
2. Use the arrow keys to select the Security menu >
Administrator Password, and then press enter.
❏
9–8
To set an HP administrator password, type your password
in the New Password and Verify New Password fields,
and then press f10.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
❏
To change an HP administrator password, type your
current password in the Old Password field, type the new
password in the New Password and Verify New Password
fields, and then press f10.
❏
To delete an HP administrator password, type your
current password in the Old Password field, and then
press f10.
3. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Entering HP Administrator Passwords
At the Computer Setup prompt, type your Administrator
Password (using the same type of keys you used to set the
password), and then press enter. After 3 unsuccessful attempts to
enter the HP administrator password, you must restart the tablet
PC and try again.
Using DriveLock
Ä
CAUTION: If you forget the DriveLock user and DriveLock master
passwords, the hard drive is permanently unusable.
DriveLock prevents unauthorized access to the contents of a hard
drive. After DriveLock protection is applied to a drive, a
password must be entered to access the drive. The drive must be
inserted into the tablet PC, not an optional docking device (select
models only) or external MultiBay, in order for it to be accessed
by the DriveLock passwords.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–9
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
DriveLock involves a user password and a master password:
■
A hard drive protected by DriveLock can be accessed with
either the user password or the master password.
■
You can delete a user password or master password only by
removing DriveLock protection from the drive. DriveLock
protection can be removed from the drive only with the
master password.
■
The owner of the user password should be the day-to-day
user of the protected hard drive. The owner of the master
password may be a system administrator or the day-to-day
user.
■
A user password and a master password can be the same
word.
you start the tablet PC from a hard drive protected with
✎ When
DriveLock, and your power-on and DriveLock passwords are
identical, you will be prompted to enter only a power-on
password instead of both a power-on and a DriveLock password.
Setting DriveLock Passwords
Ä
CAUTION: If you forget the DriveLock user and the DriveLock master
passwords, the hard drive is permanently unusable.
Ä■
CAUTION: To prevent system lockup and loss of information:
■
9–10
Shut down the tablet PC before removing the hard drive from the
hard drive bay. Do not remove the hard drive while the tablet PC is
on, in Standby, or in Hibernation.
If you are not sure whether the tablet PC is off or in Hibernation,
turn the tablet PC on by pressing the power/standby switch to the
left or right. Then shut down the tablet PC through the operating
system.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
To access the DriveLock settings in Computer Setup:
1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in Hibernation, turn the tablet PC on by
pressing the power/standby switch to the left or right, and
then shut down the tablet PC through the operating system.
2. Insert the hard drive into the tablet PC (not into an optional
docking device or external MultiBay).
3. Open Computer Setup by turning on (not restarting) the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
4. Use the arrow keys to select the Security menu > DriveLock
passwords. Then press enter.
5. Select the location of the hard drive, and then press f10.
6. Toggle the Protection field to Enable.
7. Read the warning. To continue, press f10.
8. Type your user password in the New Password and Verify
New Password fields, and then press f10.
9. Type your master password in the New Password and Verify
New Password fields, and then press f10.
10. To confirm DriveLock protection on the drive you have
selected, type DriveLock in the confirmation field, and then
press f10.
11. To save your DriveLock settings, select File > Save Changes
and Exit. Then follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–11
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Entering DriveLock Passwords
1. Be sure that the drive is inserted into the tablet PC (not an
optional docking device or external MultiBay).
2. When prompted for a DriveLock password, type your user
or master password (using the same type of keys you used to
set the password), and then press enter.
3. After 2 incorrect attempts to enter the password, you must
restart the tablet PC and try again.
Requiring a Drivelock Password at Restart
You can require that a DriveLock password be entered each time
the tablet PC is restarted. Enable and disable this feature in
Computer Setup.
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
2. Use the arrow keys to select Security > Password options >
Require password on restart.
3. Toggle the field to enable or disable, and then press enter.
4. Save your preferences by using the arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
9–12
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Changing DriveLock Passwords
Ä
CAUTION: To prevent loss of work and damage to the tablet PC and
the hard drive, shut down the tablet PC before inserting or removing a
hard drive. (The hard drive is any hard drive used in the hard drive bay.)
To access the DriveLock settings in Computer Setup:
1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in Hibernation, turn the tablet PC on by
pressing the power/standby switch to the left or right, and
then shut down the tablet PC through the operating system.
2. Be sure that the hard drive is inserted into the tablet PC (not
into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on (not restarting) the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
4. Use the arrow keys to select the Security menu > DriveLock
passwords, and then press enter.
5. Use the arrow keys to select the location of the hard drive,
and then press f10.
6. Use the arrow keys to select the field for the password you
want to change, type your current password in the Old
Password field, type the new password in the New Password
and in the Verify New Password fields. Then press f10.
7. To save your preferences, use arrow keys to select File >
Save Changes and Exit, and then follow the instructions on
the screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–13
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Removing DriveLock Protection
To access the DriveLock settings in Computer Setup:
1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in Hibernation, turn the tablet PC on by
pressing the power/standby switch to the left or right, and
then shut down the tablet PC through the operating system.
2. Be sure that the hard drive is inserted into the tablet PC (not
into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on (not restarting) the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏ For navigation instructions, press f1.
4. Use the arrow keys to select the Security menu > DriveLock
passwords, and then press enter.
5. Use the arrow keys to select the location of the hard drive,
and then press f10.
6. Toggle the Protection field to Disable, and then press f10.
7. Type your master password in the Old Password field. Then
press f10.
8. To save your preferences, use arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
9–14
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Disabling a Device
From the Computer Setup Device Security menu, you can
disable or partially disable most ports and drives.
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏
To change the language, press f2.
❏ For navigation instructions, press f1.
2. Select the Security menu > Device Security, and then enter
your preferences.
3. To confirm your preferences, press f10.
4. To save your preferences, select File > Save Changes and
Exit. Then follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and take
effect when the tablet PC restarts.
Using System Information
System information provides details about your tablet PC and
battery pack. The following sections explain how to prevent other
users from viewing system information and how to configure
system information options in Computer Setup.
System Information options allow you to
■
Display or enter the tablet PC serial number, asset tag, and
ownership tag.
■
Display a battery pack serial number.
prevent unauthorized access to this information, you must
✎ Tocreate
an HP administrator password. For instructions, refer to the
“Setting HP Administrator Passwords,” section earlier in this
chapter.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–15
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Setting System Information Options
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
2. Access or set your preferences by following these directions:
❏
To view general system information, select the File
menu > System Information.
❏
To view or enter identification values for system
components, select the Security menu > System IDs.
3. To confirm the information or your preferences, press f10.
4. To save your information or preferences, use the arrow keys
to select File > Save Changes and Exit, and then follow the
instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Firewall Software
When you use the tablet PC for e-mail, network, or Internet
access, it is possible for unauthorized persons to obtain
information about you, your tablet PC, and your data. To protect
your privacy, it is recommended that you use firewall software.
The Windows operating system firewall is available on your
tablet PC and is enabled by default. To learn more about this
firewall or to disable or reenable this firewall:
1. Select Start > Control Panel > Network and Internet
Connections > Windows Firewall.
9–16
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
2. Select the General tab.
❏ To learn more about Windows Firewall, select the Learn
more about Windows Firewall link.
❏ To disable Windows Firewall, select Off (not
recommended).
❏ To reenable Windows Firewall, select On
(recommended).
3. Select OK.
Under some circumstances a firewall can block access to Internet
games, interfere with printer or file sharing on a network, or block
authorized email attachments. If you are using Windows Firewall
and an application attempts an inbound connection to your tablet
PC for the first time, a security alert will be displayed. The
security alert allows you to configure the firewall permission for
the application.
■
To allow the application to connect to your tablet PC, select
Unblock this program. The application is added to the
Exceptions list and will not be blocked by Windows Firewall.
■
To permanently block the application, select Keep blocking
this program. Windows Firewall will block the application
anytime the application tries to connect.
■
To temporarily block the application, select Keep blocking
this program, but ask me again later. The next time the
application attempts to connect to your tablet PC, you will
receive the security alert.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–17
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
To manually add an application to the Windows Firewall
Exceptions list so that it will not be blocked by the firewall:
1. Select Start > Control Panel > Network and Internet
Connections > Windows Firewall.
2. Select the Exceptions tab.
3. Select Add Program and enter the required information
about the application.
4. Select OK. The application is added to the Exceptions list
and will not be blocked by Windows Firewall.
If you are using an optional firewall and you want to allow a
blocked application to connect:
9–18
■
Temporarily solve the problem by disabling the firewall,
performing the task, and then reenabling the firewall.
■
Permanently resolve the problem by reconfiguring the
firewall. Refer to the firewall documentation or contact the
firewall manufacturer.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
Connecting an Optional Security Cable
✎ Security solutions are designed to act as deterrents. These
deterrents may not prevent a product from being mishandled or
stolen.
To install a security cable:
1. Loop the security cable around a secured object.
2. Insert the key 1 into the cable lock 2.
3. Insert the cable lock into the security cable slot 3, and lock
the cable lock with the key.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–19
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
HP ProtectTools Security Manager
(Select Models Only)
Your tablet PC comes with HP ProtectTools Security Manager
preinstalled. This software is accessed through Microsoft®
Windows® Control Panel. It provides security features that are
designed to help protect against unauthorized access to the tablet
PC, networks, and critical data. Add-on modules for HP
ProtectTools Security Manager include the following:
■
Embedded Security for ProtectsTools
■
Credential Manager for ProtectTools
■
BIOS Configuration for ProtectTools
■
Smart Card Security for ProtectTools
Depending on your tablet PC model, add-on modules may be
preinstalled, preloaded, or downloaded from the HP Web site.
Visit http://www.hp.com for more information.
Embedded Security for ProtectTools
must have the embedded security chip in your tablet PC in
✎ You
order to use Embedded Security for ProtectTools.
Embedded Security for ProtectTools has security features that
protect against unauthorized access to user data or credentials,
which include:
9–20
■
Administrative functions, such as ownership and
management of the owner pass phrase.
■
User functions, such as user enrollment and management of
user pass phrases.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
■
Settings configuration, including setting up enhanced
Microsoft EFS and Personal Secure Drive for protecting user
data.
■
Management functions, such as backing up and restoring the
key hierarchy.
Credential Manager for ProtectTools
Credential Manager for ProtectTools has security features that
provide protection against unauthorized access to your tablet PC,
including the following:
■
Alternatives to passwords when logging on to Microsoft
Windows.
■
Single sign-on capability that automatically remembers
credentials for Web sites, applications, and protected network
resources.
■
Support for optional security devices, such as Smart Cards
and biometric fingerprint readers.
For more information, refer to the Credential Manager for
ProtectTools online documentation.
BIOS Configuration for ProtectTools
BIOS Configuration for ProtectTools provides access to BIOS
security and configuration settings within the HP ProtectTools
Security Manager application, which gives users better access to
system security features that are managed by the system BIOS.
With BIOS Configuration for ProtectTools, you can:
■
Access to power-on user and administrator password
management.
■
Configure preboot authentication features, such as smart card
and power-on password.
■
Enable and disable hardware features (such as the enable
CD-ROM boot).
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
9–21
DRAFT Revised: 8/24/04
File: Chap9.fm
PN: HP-367186-001
Security
■
Configure boot options, which includes disabling the ability
to boot to drives other than the primary hard drive.
of the features in BIOS Configuration for ProtectTools
✎ Many
are also available in Computer Setup. Refer to Chapter 11,
“Computer Setup” for additional information.
For more information, refer to the BIOS Configuration for
ProtectTools online documentation.
Smart Card Security for ProtectTools
With Smart Card Security for ProtectTools, you can:
■
Access optional smart card security features. Security
enhancements are supported by the optional HP ProtectTools
Smart Card and an optional supported reader, such as the HP
PC Card Smart Card Reader.
■
Initialize an HP ProtectTools Smart Card so that it can be
used with Credential Manager for ProtectTools.
■
Work with the BIOS to enable optional smart card
authentication in a preboot environment, and to configure
separate smart cards for an administrator and a user.
■
Set and change the password used to authenticate users to the
smart card.
■
Backup and restore credentials stored on the smart card.
For more information, refer to the Smart Card Security for
ProtectTools online documentation.
9–22
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
10
MultiBoot
A bootable medium or network interface card (NIC) contains files
that the tablet PC needs to start and operate properly. The
MultiBoot utility, disabled by default, enables you to identify the
devices and control the sequence in which the system attempts to
boot from those devices as it starts up your tablet PC.
Bootable devices include optical drive discs, such as CDs or
DVDs, bootable diskettes, or NICs.
devices, including USB devices and NICs, must be enabled
✎ Some
in Computer Setup before they can be included in the boot
sequence. For more information, refer to “Enabling Bootable
Devices in Computer Setup” in this chapter.
Understanding the Default Boot
Sequence
By default, when more than one bootable device is in the system,
the tablet PC chooses the startup device by searching enabled
devices and locations in a predetermined sequence.
On every boot, the system looks for bootable drive A devices
first. If it fails to find a bootable drive A device, it searches for
bootable drive C devices. Drive A devices include optical drives
and diskette drives. Drive C devices include optical drives and
primary hard drives.
The primary hard drive can only boot as drive C. The NIC does
not have a drive letter assigned to it.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
10–1
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
optical drive device (such as a CD-ROM drive) can boot either
✎ An
as drive A or drive C, depending on the format of the CD. Most
bootable CDs boot as drive A. If you have a CD that boots as the
C drive, the system will boot the diskette drive before it boots the
CD.
By default, the tablet PC selects the startup device by searching
enabled devices and locations in a predetermined sequence.
You can change the sequence in which the tablet PC searches for
a startup device by enabling MultiBoot and entering a new startup
sequence, also called a boot order. Or, you can use MultiBoot
Express to set the tablet PC to prompt you for a startup location
each time the tablet PC is started or restarted.
The list below describes the default sequence in which drive
numbers are assigned. (The actual startup sequence varies by
configuration.)
■
Default sequence for devices that boot as drive A:
a. Optical drive in an optional docking device MultiBay or in
an external MultiBay that contains a disc that boots as
drive A.
b. Diskette drive in an optional docking device or in an
external MultiBay.
■
Default sequence for devices that boot as drive C:
a. An optical drive in an optional docking device MultiBay
or in an external MultiBay that contains a disc that boots
as drive C.
b. Hard drive in the tablet PC primary hard drive bay.
c. Hard drive in an optional docking device MultiBay or in
an external MultiBay.
no drive letter is associated with the NIC, changing the boot
✎ Since
order of a NIC does not affect drive letters of the other devices.
10–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
Enabling Bootable Devices in
Computer Setup
The tablet PC can start up from a USB device or the NIC only if
that device has been enabled for inclusion in MultiBoot.
To enable a device or location for inclusion in MultiBoot:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. To enable bootable media in USB drives or in drives inserted
into an optional docking device, use the arrow keys to select
Advanced > Device options. Then select Enable USB
legacy support.
-orTo enable a NIC, select Security > Device security.
3. Save your preferences and exit Computer Setup, by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and
they take effect when the tablet PC restarts.
connect a NIC to a Preboot eXecution Environment (PXE) or
✎ ToRemote
Program Load (RPL) server during startup without using
MultiBoot, quickly press f12 when the Network Service Boot
message appears in the lower-right corner of the screen.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
10–3
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
Understanding MultiBoot Results
Before changing the startup sequence, consider the following:
10–4
■
When the tablet PC restarts after the boot order has been
changed, it considers only the first device of each drive type
when searching for a startup device (except for optical
devices).
For example, the tablet PC is connected to an optional
docking device containing an optical drive and a diskette
drive. In the default boot sequence, the optical drive comes
before the diskette drive. If the system fails to boot to the
optical drive (either because it does not contain a disc or
because the disc is not bootable) it does not try to boot to the
diskette drive. Instead, it tries to boot to he first hard drive
device present in the system. However, if there are two
optical devices, and the first optical device does not boot, the
system tries to boot to other optical devices in the system.
■
Changing the boot sequence also changes the logical drive
designations. For example, if you start up from a CD-ROM
drive with a disc that boots as drive C, that CD-ROM drive
becomes drive C and the hard drive in the hard drive bay
becomes drive D.
■
Starting up from a NIC does not affect logical drive
designations because no drive letter is associated with the
NIC.
■
Drives in an optional docking device are treated like external
USB devices in the boot sequence and must be enabled in
Computer Setup.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
Setting MultiBoot Preferences
There are two ways to set MultiBoot sequences:
■
Set a new default boot sequence that the tablet PC uses each
time it starts up.
■
Use variable boot sequences using MultiBoot Express. This
feature prompts you for a startup device each time the tablet
PC is started or restarted.
Setting a New Default Boot Sequence
To set a startup sequence that the tablet PC uses each time it is
started or restarted with Computer Setup:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Use the arrow keys to select Advanced > Boot options, and
then press enter.
3. Toggle the MultiBoot field to Enable.
4. Toggle the Boot Order fields to the boot sequence that you
prefer.
5. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup, and
they take effect when the tablet PC restarts.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
10–5
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
Setting a MultiBoot Express Prompt
To set the tablet PC to display the MultiBoot startup location
menu each time the tablet PC is started or restarted with
Computer Setup:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Use the arrow keys to select Advanced > Boot options, and
then press enter.
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the tablet PC to display the
startup location menu before it defaults to the current
MultiBoot setting (when 0 is selected, the Express Boot
startup location menu is not displayed.)
4. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup, and
they take effect when the tablet PC restarts.
10–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
Entering MultiBoot Express Preferences
When the Express Boot menu is displayed during startup:
■
To specify a startup location from the Express Boot menu,
select your preference within the allotted time, and then press
enter.
■
To prevent the tablet PC from defaulting to the current
MultiBoot setting, press any key before the allotted time
expires. The tablet PC will not start up until you select a
startup location and press enter.
■
To allow the tablet PC to start up according to the current
MultiBoot settings, wait for the allotted time to expire.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
10–7
DRAFT Revised: 8/24/04
File: Chap10.fm
PN: HP-367186-001
MultiBoot
10–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
11
Computer Setup
Using Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be
used even when the operating system is not working or will not
load. If the operating system is working, the tablet PC restarts the
operating system after you exit Computer Setup.
devices are not supported in Computer Setup; you must
✎ Pointing
use the keyboard to navigate and make selections.
external keyboard connected by USB can be used with
✎ An
Computer Setup only if USB legacy support is enabled. For more
information about USB, refer to the “Connecting a USB Device”
section in the “Hardware Components” chapter in this guide.
The menu tables later in this chapter provide an overview of
Computer Setup options.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
11–1
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
Accessing Computer Setup
The information and settings in Computer Setup are accessed
from the File, Security, Tools, and Advanced menus.
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left of the screen.
❏
To change the language, press f2.
❏
To view navigation information, press f1.
❏
To return to the Computer Setup menu, press esc.
2. Select the File, Security, Tools, or Advanced menu.
3. To exit Computer Setup, choose one of the following:
❏
To exit without saving any changes, use the arrow keys to
select File > Ignore changes and exit, and then follow
the instructions on the screen.
❏
To exit and save all the settings you have entered, use the
arrow keys to select File > Save changes and exit, and
then follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the tablet PC restarts.
Restoring Computer Setup Defaults
To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press f2.
❏
To view navigation information, press f1.
2. Use the arrow keys to select File > Restore defaults.
3. Select the Restore Defaults check box.
11–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
4. To confirm the restoration, press f10.
5. Select File > Save changes and exit, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you may have entered is saved.
Selecting from the File Menu
Select
To Do This
■ View identification information about
System Information
the tablet PC and any battery packs in
the system.
■ View specification information about
the processor, memory and cache
size, video revision, keyboard
controller version, and system ROM.
Save to floppy
Save system configuration settings to a
diskette.
Restore from floppy
Restore system configuration settings
from a diskette.
Restore defaults
Replace configuration settings in
Computer Setup with factory default
settings. (Identification information is
retained.)
Ignore changes and exit
Cancel changes entered during the
current session. Then exit and restart the
tablet PC.
Save changes and exit
Save changes entered during the current
session. Then exit and restart the tablet
PC. The changes you save are in effect
when the tablet PC restarts.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
11–3
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
Selecting from the Security Menu
Select This Option
To Do This
Administrator password
Enter, change, or delete an HP
Administrator password.
Power-On password
Enter, change, or delete a power-on
password.
Password options
■
■
DriveLock passwords
DriveLock settings are
accessible only when you enter
Computer Setup by turning on
(not restarting) the tablet PC.
Enable/disable power-on support for
smart cards.
✎
11–4
Enable/disable required password on
restart
Enable/disable DriveLock; change a
DriveLock user or master password.
✎
Smart Card Security
Enable/disable stringent security
This feature is supported by
select smart card readers only.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
Select This Option
To Do This
■ Enable/Disable the embedded
Embedded Security
security chip.
■ Restore embedded security chip
to factory settings.
■
Enable/disable power-on
authentication support.
■
■
Enable/disable automatic DriveLock.
✎
Reset power-on authentication
credential.
Embedded Security settings are
accessible only if the tablet PC is
equipped with an embedded
security chip.
■ Enable/disable devices in the system.
■ Enable NIC for inclusion in MultiBoot.
Device security
System IDs
Enter user-defined identification values.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
11–5
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
Selecting from the Tools Menu
Select
To Do This
HDD Self Test options
Run a quick or comprehensive self-test on
any hard drive in the system.
Battery Information
View information about any battery packs
in the tablet PC.
Memory Check
■
Run a self-test on memory modules
in the tablet PC.
■
View information about memory
modules installed in the tablet PC.
Selecting from the Advanced Menu
Select
To Do This
Language (or press f2)
Change the Computer Setup language.
Boot options
■ Enable/disable QuickBoot, which
starts the tablet PC more quickly by
eliminating some startup tests. (If you
suspect a memory failure and want
to test memory automatically during
startup, disable QuickBoot.)
■ Enable/disable MultiBoot, which sets
a startup sequence that can include
most bootable devices and media in
the system. For details, refer to the
“MultiBoot” chapter.
■ Set the boot order.
11–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
Select
To Do This
■ Enable/disable num lock mode at
Device options
startup.
■ Enable/disable multiple standard
pointing devices at startup. (To set the
tablet PC to support only a single,
usually nonstandard, pointing device
at startup, select Disable.)
■ Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
■ Enable/disable USB legacy support
for a USB keyboard, mouse, and hub.
When USB legacy support is enabled:
❐ A USB keyboard, mouse, and hub
work even when a Windows
operating system is not loaded.
❐ The tablet PC starts from a
bootable hard drive, diskette drive
diskette, or CD, CD-RW, or DVD
inserted into a drive connected by
a USB connector to the tablet PC
or to an optional docking device.
■ Enable/disable all settings in the
SpeedStep window. (When Disable
is selected, the tablet PC runs in
Battery Optimized mode.)
■ Swap the functions of the fn key and
left ctrl key.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
11–7
DRAFT Revised: 8/24/04
File: Chap11.fm
PN: HP-367186-001
Computer Setup
11–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap12.fm
PN: HP-367186-001
12
HP Client Management
Solutions
HP Client Management Solutions provides standards-based
solutions for managing client (user) desktop, workstation, and
tablet PCs in a networked environment.
The key capabilities and features of client management are
■
Initial software image deployment.
■
Remote system software installation.
■
Software management and updates.
■
ROM updates.
■
Tracking and security of computer assets (the hardware and
software installed on the computer).
■
Fault notification and recovery of certain system software and
hardware components.
for specific features described in this chapter may vary,
✎ Support
depending on the computer model and/or version of management
software installed on your computer.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
12–1
DRAFT Revised: 8/24/04
File: Chap12.fm
PN: HP-367186-001
HP Client Management Solutions
Configuration and Deployment
HP computers come with a preinstalled system software image.
The initial software image is configured during the first-time
setup of the computer. After a brief software “unbundling”
occurs, the computer is ready to be used.
A customized software image can be deployed (distributed) by
■
Installing additional software applications after unbundling
the preinstalled software image.
■
Using software deployment tools, such as Altiris Deployment
Solutions, to replace the preinstalled software with a
customized software image.
■
Using a disk cloning process to copy the contents from one
hard drive to another.
The deployment method you should use depends on your
organization’s technology environment and processes. Visit
the HP Web site at http://www.hp.com/go/pcsolutions for more
information on selecting the best deployment method for your
organization.
system recovery discs, Computer Setup utility, and other
✎ The
system features provide further assistance with recovery of
system software, configuration management and troubleshooting,
and power management.
HP Client Manager Software
HP Client Manager Software (HP CMS) integrates HP Intelligent
Manageability technology within Altiris software. HP CMS
provides superior hardware management capabilities for HP
devices. It provides
12–2
■
Detailed views of hardware inventory for asset management.
■
PC health check monitoring and diagnostics.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap12.fm
PN: HP-367186-001
HP Client Management Solutions
■
Web-accessible reporting of business-critical details, such as
machines with thermal warnings and memory alerts.
■
Remote updating of system software such as device drivers
and ROM BIOS.
functionality can be added when HP CMS is used with
✎ Additional
optional Altiris Solutions software (purchased separately).
For more information on HP Client Manager, visit the HP Web
site at http://www.hp.com/go/easydeploy.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
12–3
DRAFT Revised: 8/24/04
File: Chap12.fm
PN: HP-367186-001
HP Client Management Solutions
12–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
13
Software Update and
Recoveries
Preparing to Update Software
For optimal tablet PC performance and to make sure your tablet
PC remains compatible with changing technologies, HP
recommends that you install the latest versions of HP software as
they become available.
To update HP software:
1. Prepare for any update by identifying your tablet PC type,
series or family, and model; refer to “Accessing Tablet PC
Information” later in this chapter. Prepare for a system ROM
update by identifying (through the Computer Setup utility)
the ROM versions currently installed on the tablet PC.
2. Access the updates through your local HP Web site or the
Support Software CD (purchased separately).
3. Download and install the updates.
tablet PC system ROM stores the BIOS. The BIOS
✎ The
determines how the tablet PC hardware interacts with the
operating system and external devices and also supports
such tablet PC services as time and date.
tablet PC connects to a network, HP recommends that
✎ Ifyouyourconsult
with your network administrator before installing
any software updates, especially system ROM updates.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
13–1
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
Obtaining the Support Software CD
The Support Software CD provides HP software updates and
installation instructions. The CD includes device drivers, ROM
updates, and utilities.
To purchase the current Support Software CD or a subscription
that provides both the current version and future versions of the
CD, visit the HP Web site at http://www.hp.com.
Accessing Tablet PC Information
To access the updates for your tablet PC, the following
information will be needed:
■
The product category is Tablet PC.
■
The product family name and series number are printed in the
lower-right corner of the display bezel.
■
Model information is provided on the serial number label on
the bottom of the tablet PC.
To determine whether available ROM updates contain later ROM
versions than those currently installed on the tablet PC, you need
to know the version of the system ROM currently installed.
13–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
To display ROM information in Computer Setup:
1. Open Computer Setup by turning on or restarting the tablet
PC. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press f2.
❏
For navigation instructions, press f1.
2. Select File > System Information. The system ROM
information is displayed.
3. To exit Computer Setup without changing any settings, use
the arrow keys to select File > Ignore changes and exit, and
then follow the instructions on the screen. After Computer
Setup closes, the tablet PC restarts in Windows.
For information about using Computer Setup, refer to the
“Computer Setup” chapter.
Downloading Software from the
Internet
Most software on the HP Web site is packaged in compressed
files called a SoftPaqs. Some ROM updates may be packaged in
compressed files called RomPaqs. Other ROM updates may be
provided as CPQFlash SoftPaqs.
Most download packages contain a file named Readme.txt. A
Readme.txt file contains information regarding installing and
troubleshooting the file. The Readme.txt files included with
RomPaqs are in English.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
13–3
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
Downloading System ROM
Ä
CAUTION: To prevent an unsuccessful installation, download and install
the system ROM only while the tablet PC is connected to reliable external
power using the AC adapter. Do not download or install the system ROM
while the tablet PC is running on battery power, docked in an optional
port replicator, or connected to an optional power source. During the
download and installation:
■ Do not unplug the tablet PC from the electrical outlet.
■ Do not shut down the tablet PC.
■ Do not remove or insert a drive.
To download and install a system ROM:
1. Access the page on the HP Web site that provides software
for your tablet PC.
2. Follow the instructions on the screen to locate the system
ROM you want to download.
3. At the download area:
a. Write down the information (date and name) of any
update that is later than the system ROM currently
installed on your tablet PC.
b. Select the software you want and follow the download
instructions on the screen.
4. When the download is complete, open Windows Explorer.
5. In Windows Explorer, select My Computer, then the hard
drive designation (usually drive C), and then the folder to
which you saved the downloaded item.
6. In the folder, select the name or number of the software
package containing the system ROM update. The system
ROM installation begins.
7. To complete the installation, follow the instructions on the
screen.
a message on the screen reports a successful installation,
✎ After
you can delete the download package from the folder.
13–4
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
Downloading Other Software
To download and install other software:
1. Access the page at the HP Web site that provides software for
your tablet PC.
2. Follow the instructions on the screen to find the software you
want to update.
3. At the download area, select the software you want and
follow the downloading instructions on the Web page.
4. When the download is complete, open Windows Explorer.
5. In Windows Explorer, select My Computer, then the hard
drive designation (usually drive C), and then the folder to
which you saved the downloaded item.
6. In the folder, select the name or number of the software
package containing the update.
7. Select the file that includes an .EXE extension—for example,
FILENAME.EXE. The installation begins.
8. To complete the installation, follow the instructions on the
screen.
a message on the screen reports a successful installation,
✎ After
you can delete the download package from the folder.
System Recovery
The tablet PC system recovery process provides several ways to
recover system functionality. The Driver Recovery and Operating
System discs enable you to recover or repair your tablet PC
without losing personal data. The Operating System disc also
allows you to reinstall the operating system software provided
with the tablet PC.
best results, attempt to recover optimal tablet PC
✎ For
functionality by using the following procedures in the order
described here.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
13–5
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
Safeguarding Your Data
Software or devices added to the tablet PC can cause your system
to become unstable. To safeguard your documents, store personal
files in the My Documents folder and periodically create a
backup copy of My Documents.
Setting System Restore Points
Tablet PCs with Windows XP operating systems provide the
option of setting system restore points (benchmarks) daily as you
change your personal settings. The tablet PC may also set restore
points when you add new software or devices. You should
periodically set system restore points when the tablet PC is
functioning at optimal performance and before installing new
software or devices. This enables you to return to a previous
configuration restore point if you encounter problems.
To set a system restore point:
1. Select Start > Help and Support. Select the task “Use Tools
to view your computer information and diagnose problems.”
Select System Restore. A System Restore window opens.
2. Follow the on-screen directions for setting a restore point.
To restore the tablet PC to a previous date and time when it was
functioning optimally:
1. Select Start > Help and Support > Tools > System Restore.
2. Follow the on-screen directions for restoring the tablet PC.
13–6
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
Repairing the Operating System
To attempt an operating system repair without deleting your
personal data, use the Operating System disc that was shipped
with the tablet PC:
1. Connect the tablet PC to external power and turn on the tablet
PC.
2. Immediately insert the Operating System disc into the tablet
PC.
3. Press and hold the power button for 5 seconds to turn off the
tablet PC.
4. Press the power button again to start the tablet PC.
5. When prompted, press any key to boot from the disc. After a
few minutes, the Welcome to Setup screen is displayed.
6. Press enter to continue. A Licensing Agreement screen is
displayed.
7. Press f8 to accept the agreement and continue. The Setup
window is displayed.
8. Press R to repair the selected Windows installation. The repair
process begins. This process may take up to 2 hours to
complete. The tablet PC restarts in Windows after the process
is complete.
Reinstalling the Operating System
Ä
CAUTION: Personal data and software you have installed on the tablet
PC will be lost during the operating system reinstall. To protect your
data, back up your data before reinstalling your operating system. Refer
to the Windows online help utility to learn more about backing up
your files.
If other recovery efforts do not successfully repair the tablet PC,
you can reinstall the operating system.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
13–7
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
To reinstall the operating system:
1. Connect the tablet PC to external power and turn on the tablet
PC.
2. Immediately insert the Operating System disc into the tablet
PC.
3. Press and hold the power button for 5 seconds to turn off the
tablet PC.
4. Press the power button again to start the tablet PC.
5. When prompted, press any key to boot from the disc. After
a few minutes, the Welcome to Setup screen is displayed.
6. Press enter to continue. A Licensing Agreement screen is
displayed.
7. Press f8 to accept the agreement and continue. The Setup
window is displayed.
8. Press esc to continue installing a new copy of the operating
system instead of repairing it.
9. Press enter to set up the operating system.
10. Press C to continue setup using this partition.
11. Select Format the partition using the NTFS file system
(Quick) and press enter.
Ä
CAUTION: Formatting this drive will delete all current files.
12. Press F to format the drive. The reinstallation process begins.
This process may take up to 2 hours to complete. The tablet
PC restarts in Windows when the process is complete.
prompted for the product key, refer to the Microsoft
✎ When
Certificate of Authenticity label located on the bottom of the
tablet PC.
13–8
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
Reinstalling Device Drivers and Other
Software
After the operating system installation process is complete, you
must reinstall drivers.
To reinstall drivers, use the Driver Recovery disc included with
the tablet PC:
1. While running Windows, insert the Driver Recovery disc into
the optical drive.
If you do not have Autorun enabled, select Start > Run.
Then type D:\SWSETUP\APPINSTL\SETUP.EXE (where D indicates
the optical drive).
2. Follow the on-screen instructions for installing the drivers.
After the drivers are reinstalled, you must reinstall any software
you added to the tablet PC. Follow the installation instructions
provided with the software.
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
13–9
DRAFT Revised: 8/24/04
File: Chap13.fm
PN: HP-367186-001
Software Update and Recoveries
13–10
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: Chap14.fm
PN: HP-367186-001
14
Specifications
Operating Environment
The operating environment information in the following table
might be helpful if you plan to use or transport the tablet in
extreme environments.
Factor
Metric
U.S.
Operating
(not writing
to optical disc
0°C to 35°C
32°F to 95°F
Operating (writing to
optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Temperature
Relative humidity (noncondensing)
Operating
10% to 90%
10% to 90%
Nonoperating
5% to 95%
5% to 95%
Maximum altitude (unpressurized)
Operating (14.7 to
10.1 psia)
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating (14.7
to 4.4 psia)
-15 m to 12,192 m
-50 ft to 40,000 ft
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
14–1
DRAFT Revised: 8/24/04
File: Chap14.fm
PN: HP-367186-001
Specifications
Rated Input Power
The power information in this section might be helpful if you
plan to travel internationally with the tablet PC.
The tablet PC operates on DC power, which can be supplied by an
AC or a DC power source. Although the tablet PC can be
powered from a stand-alone DC power source, it is strongly
recommended that the tablet PC be powered only with an AC
adapter or DC power cord supplied or approved by HP.
The tablet PC is capable of accepting DC power within the
following specifications:
Input Power
Rating
Operating voltage
18.5 V dc @ 3.5 A - 65 W
Operating current
3.5 A
This product is designed for IT power systems in Norway with
phase-to-phase voltage not exceeding 240 Vrms.
14–2
Hardware and Software Guide
hp CONFIDENTIAL
August 24, 2004 4:02 pm
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
AC adapter
connecting 2–27
disconnecting 2–15
AC power 2–15
accessing notebook
information 11–2
adapter, modem 6–27
adjusting the volume 5–3
Aircraft Power Adapter
connecting 2–27
airport security devices 6–2
altitude specifications 11–1
ambient light sensor 3–18
analog vs. digital line 6–25
applications. See software
audio-in (microphone) jack
5–2
audio-out (headphone) jack
5–2
Automobile Power
Adapter/Charger
connecting 2–27
AutoPlay 5–9
Autorun 5–9
battery bay
inserting battery pack 2–16
removing battery pack
2–16
battery charge information
displays
hotkey 3–6
increasing accuracy 2–24
interpreting 2–25
battery packs
calibrating 2–28
disposing of 2–33
monitoring charge 2–24
primary 2–16
recycling 2–33
storing 2–15, 2–32
See also battery power
battery power
conserving 2–31
low-battery conditions
2–26
running notebook on 2–15
See also battery packs
bays
See also compartments
BIOS information, displaying
9–2
bluetooth 8–10
Hardware and Software Guide
Index–1
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
Brightness item on Q Menu
7–9
button(s)
esc 4–10
pen 4–2
Q menu 4–8
reset 4–9
rotate 4–8
Tablet PC Input Panel
launch 4–8
Windows Security 1–12,
4–9
See also jog dial; latch;
switch
buttons
PC Card 6–11
Presentation mode 3–12
See also battery pack
release latch; display
switch; keys
cable lock, security 9–19
cables
modem 6–25
calibration
pen 4–4
calibration, battery 2–28
cap, replacing pointing stick
3–2
Capture Screen item on Q
Menu 7–9
Capture Window item on Q
Menu 7–10
card and socket services, PC
Card 6–9
card. See digital media
CD(s)
Support Software CD 11–1
CDs
See also recovery discs
Change Mode Service 7–26
command controls
identified 4–6
procedures 4–8
Quick Reference 4–7
compartments
See also bays
Computer Setup
accessing 11–1
Advanced menu 11–6
changing language in 11–2
displaying ROM
information with 11–3
File menu 11–3
navigating 6–33
notebook information 11–2
procedures 11–1
restoring defaults 11–2
Security menu 11–4
setting security preferences
9–2
Tools menu 11–6
USB legacy support 6–33,
11–1
connector(s)
drive 6–2
connectors
See also jacks; ports
controls, command 4–6
copyright warning 5–7
cord
Index–2
Hardware and Software Guide
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
See also cables
country-specific modem cable
adapter 6–27
CPQFlash file 11–3
critical low-battery condition
identifying 2–26
restoring from 2–27
ctrl+alt+delete command 4–9
Desktop Video Profiles 7–16
device disabling 9–15
device drivers
external devices 6–33
PC Card 6–9
dial, jog
described 4–10
identified 4–6
digital vs. analog line 6–25
disc, optical. See CDs; DVDs
display
switching image to or from
3–6, 3–7
display switch
setting preferences 3–16
docking station
affecting presentation
mode 7–12
downloading
software 11–5
system ROM 11–4
drive media affected by airport
security 6–2
DriveLock 9–9
drives
affected by airport security
6–2
caring for 6–1
See also CDs: DVDs: hard
drive
shipping 6–2
DVD region settings 5–11
DVDs
See also recovery discs
electrostatic discharge (ESD)
6–2, 6–14
embedded numeric keypad
3–10
enablers, PC Card 6–9
enabling
internal keypad 3–10
enter command 4–10
environmental specifications
11–1
esc button
procedures 4–10
ESD (electrostatic discharge)
6–2
Extended Desktop item on Q
Menu 7–11
external keypad 3–11
external monitor 5–6
switching image 3–7
External Only item on Q Menu
7–10
external video 5–4
firewall software 9–16
fn key 3–9, 3–10
Hardware and Software Guide
Index–3
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
Fn, specific functions of
on on-screen keyboard
4–14
freeze, system 4–9
function keys (F1, F2, etc.)
accessing, on on-screen
keyboard 4–14
HP administrator password
9–8
HP password 9–4
HP password guidelines 9–5
hub, USB 6–32
humidity specifications 11–1
increasing memory 6–24
infrared 6–29, 6–30
initiating Hibernation 2–9
initiating Standby 2–10
installing CD and DVD
software 5–8
installing the primary hard
drive 6–7
Internal and External item on
Q Menu 7–11
Internal Only item on Q Menu
7–10
Internet Connection Firewall
9–16
hard drive
activity light 6–4
caring for 6–1
DriveLock 9–9
installing, primary 6–7
removing, primary 6–5
replacing, primary 6–4
headphone jack 5–2
headphones 5–3
Hibernation
exiting 1–16, 2–2, 2–26
file space requirements for
6–24
initiated during critical
low-battery condition
2–26
initiating 2–9, 7–14
resuming from 2–9
hibernation file 6–24
holder, pen 4–5
hotkeys
shortcut reference to
commands 3–6
switch image 3–7
with external keyboards
3–9
jack(s)
audio line-out 5–3
microphone input 5–3
RJ-11 6–25
S-Video out 5–5
jacks
See also connectors: ports
jog dial
procedures 4–10
key(s)
Fn 3–9, 3–10
Index–4
Hardware and Software Guide
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
function 3–9
hotkeys 3–9
internal keyboard 3–10
num lk 3–10
shortcut 3–9
keyboard
external 3–9
USB 6–32
keyboard, external 3–8
keyboard, external USB
supported 4–1
keyboard, on-screen 4–14
keypads
enabling/disabling 3–10
external 3–11
internal 3–9
keys
See also buttons; display
switch
landscape orientation
defined 4–11
Landscape View, Primary and
Secondary 4–11
Landscape-Primary item on Q
Menu 7–12
Landscape-Secondary item on
Q Menu 7–13
latch
See also buttons: display
switch
light
num lock 3–10
lights
IDE drive activity 6–4
lock, security cable 9–19
low-battery conditions
identifying 2–26
resolving 2–27
media, drive
affected by airport security
6–2
memory
adding expansion memory
module 6–14
increasing RAM 6–24
primary memory module,
replacing 6–19
upgrading primary board
6–14
microphone 5–2
internal 5–2
jack 5–2
microphone jack 5–2
modem
cable 6–25
connecting 6–26
country-specific adapter
6–26, 6–27
jack 6–25
modes
presentation 7–12, 7–20
undocked 7–17
viewing 7–17
writing 7–19
monitor
switching image 3–16
monitor, external 5–6
switching display 3–7
Hardware and Software Guide
Index–5
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
mouse, external
setting preferences for 4–1
supported 4–1
MultiBay II
external 6–34
Mute On/Off item on Q Menu
7–9
network
connecting 6–29
noise suppression circuitry
6–28
num lock
key 3–10
light 3–10
number
keys, on on-screen
keyboard 4–14
numeric keypad 3–10
numeric keypad. See keypad,
external; keypad, internal
NVIDIA nView Desktop
Manager Utility 7–16
operating environment
specifications 11–1
operating system 9–16
passwords 9–4
security 9–1
optical disc. See CDs; DVDs
optical drive
activity light 6–4
See also CDs; drives;
DVDs
overhead projector
switching display to or
from 3–6
passwords
DriveLock 9–10
forgetting 9–3
HP 9–4
HP administrator 9–8
HP guidelines 9–5
power-on 9–6
using 9–3
Windows 9–4
Windows guidelines 9–5
passwords, coordinating 9–5
PC Card
buttons 6–11
enablers and card and
socket services 6–9
inserting 6–9, 6–10
removing 6–11
stopping 6–11
types 6–9
PCMCIA cards 6–9
pen
attaching 4–5
button 4–2
calibration 4–4
components 1–1
entering information with
4–2
Help and tutorials 4–1
Journal application 4–1
pen-activated buttons 4–6
setting preferences for 4–5
Index–6
Hardware and Software Guide
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
pointing device preferences
3–4
pointing device(s)
command controls 4–6
pen 4–1
setting preferences for 4–5
pointing stick
cap, replacing 3–2
using 3–2
Port Replicator (optional)
enabling USB legacy
support 11–7
identification information
11–3
port, infrared 6–29
portrait orientation
defined 4–11
Portrait View, Primary and
Secondary 4–11
Portrait-Primary item on Q
Menu 7–12
Portrait-Secondary item on Q
Menu 7–12
ports
See also connectors; jacks
power
schemes 3–15
See also battery pack;
Hibernation; shutdown
procedures; Standby
switching between AC and
battery 2–15
See also battery power
Power Controls item on Q
Menu 7–14
power cord
See also cables
power-on password. See
passwords
presentation mode
described 7–20
Presentation Mode On/Off
item on Q Menu 7–12
profile for 7–22
Presentation mode button
3–12
Presentation mode
preferences, setting 3–15
profiles, Desktop Manager
Utility 7–16
projector 5–6
switching display 3–7
Q Menu
button 7–2
closing 7–2
controls 7–2
described 4–8
displaying 7–2
icon 7–2
items, number supported
7–4
items, obtaining
information about 7–3
selecting item from 7–3
setting preferences for 7–4
testing items on 7–3
Q menu button
procedures 4–8
Q Menu system-defined items
Brightness 7–9
Hardware and Software Guide
Index–7
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
Capture Screen 7–9
Capture Window 7–10
Extended Desktop 7–11
External Only 7–10
Hibernate 7–14
Internal and External 7–11
Internal Only 7–10
Landscape-Primary 7–12
Landscape-Secondary
7–13
Mute On/Off 7–9
Portrait-Primary 7–12
Portrait-Secondary 7–12
Power Controls 7–14
Presentation Mode On/Off
7–12
Q Menu Settings 7–15
Shut Down 7–14
Standby 7–14
Tablet PC Settings 7–15
Volume 7–9
Wireless On/Off 7–9
RAM (random access
memory) 6–24
rated input power
specifications 11–2
region settings, DVD 5–11
replacing
primary hard drive 6–4
replacing the primary memory
module 6–19
reset (emergency shut down)
4–9
resuming from Hibernation
2–9
resuming from Standby 2–10
ROMPaq 11–3
rotate button
procedures 4–8
setting preferences for
4–11
Safeguarding Data 11–6
SD (Secure Digital) Card
6–12, 6–13
security cable lock, connecting
9–19
security features on notebook
Computer Setup 9–2
Quick Reference 9–1
Setup utility
resetting the tablet PC 4–9
setting security preferences
9–2
shortcut keys
with external keyboards
3–9
shutting down the notebook
2–8
shutting down the tablet PC
4–9
slots
memory 6–22
SD Card 6–12
socket services, PC Card 6–9
SoftPaq 11–3
software
firewall 9–2, 9–16
Index–8
Hardware and Software Guide
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
Q Menu 7–1
setting up 4–2
Setup utility 4–9
Tablet PC Input Panel 4–14
Task Manager 4–9
Windows Security window
4–9
software updates 11–1
CPQFlash file 11–3
determining current
version of system ROM
11–2
identifying software
packages 11–3
ROMPaq 11–3
SoftPaq 11–3
updating system ROM
from Internet 11–3
Sonic RecordNow! 5–11
speakers 5–2
speakers, external
connecting 5–3
specifications
operating environment
11–1
rated input power 11–2
Standby
avoiding with infrared
6–31
exiting 1–16, 2–2
initiated during critical
low-battery condition
2–26
initiating 2–10, 7–14
initiating with hotkey 3–6
resuming from 2–10
Standby item on Q Menu 7–14
Support Software CD 11–1
S-Video 5–4
connecting cable 5–5
jack 5–5
switch, display
setting preferences 3–16
switching display and image
3–6
system information 3–6
system information,
displaying 9–16
system lockup 4–9
System Restore Points 11–6
system ROM (Read Only
Memory)
defined 11–1
determining current
version of 11–2
tab button
procedures 4–9
Tablet PC Button Driver 7–27
Tablet PC Input Panel
application 4–14
Tablet PC Input Panel launch
button
procedures 4–8
Tablet PC Settings item on Q
Menu 7–15
telephone (RJ-11) jack
modem cable 6–25
television
connecting audio 5–5
connecting video 5–5
Hardware and Software Guide
Index–9
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
S-Video jack 5–5
switching image to or from
3–6
temperature
specifications 11–1
storage, for battery packs
2–32
traveling with notebook
environmental
specifications 11–2
traveling with the notebook
Aircraft Power Adapter
1–11, 2–27
Automobile Power
Adapter/Charger 2–27
battery pack temperature
considerations 2–32
protecting hardware
connectors 6–12
turning off the tablet PC 4–9
turning the notebook on or off
2–8
UDF (Universal Disc Format)
Reader 5–9
undocked mode
described 7–17
profile for 7–21
Universal Disc Format (UDF)
Reader 5–9
updating software 11–1
USB
connectors 6–32
devices 6–32, 6–33
hubs 6–32
legacy support 6–33
USB legacy support 11–1
user passwords. See passwords
VCR
connecting audio 5–5
connecting video 5–5
switching image to or from
3–6
video devices
S-Video jack 5–5
switching image to or from
3–6
viewing mode
described 7–17
profile for 7–21
volume
down button 5–1
mute 5–1
mute light 5–1
up button 5–1
volume controls 5–3
Volume item on Q Menu 7–9
Windows administrator
password. See passwords
Windows firewall 9–2, 9–16
Windows Media Player 5–10
Windows password guidelines
9–5
Windows Security button
identified 1–12
procedures 4–9
Windows user password. See
passwords
Index–10
Hardware and Software Guide
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
WinDVD Creator Plus 5–10
WinDVD Player 5–10
wireless
button 8–12
types of WLAN adapters
8–8
wireless local area network
(WLAN) 8–7
WLAN software 8–9
Wireless On/Off item on Q
Menu 7–9
WLAN
identifying devices 8–7
software 8–9
troubleshooting 8–9
types 8–8
writing mode
described 7–19
profile for 7–21
Hardware and Software Guide
Index–11
hp CONFIDENTIAL
DRAFT Revised: 8/24/04
File: 367426-001IX.fm
PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number
Index
Index–12
Hardware and Software Guide
hp CONFIDENTIAL

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:08:25 12:43:30-07:00
Modify Date                     : 2004:08:25 12:43:30-07:00
Page Count                      : 224
Creation Date                   : 2004:08:25 19:43:30Z
Mod Date                        : 2004:08:25 19:43:30Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : MKuo
Metadata Date                   : 2004:08:25 19:43:30Z
Creator                         : MKuo
Title                           : Notebook User Manual 367426-xx1.PDF

EXIF Metadata provided by EXIF.tools

Broadcom BRCM1014 Broadcom 802.11a/g Mini PCI Card User Manual Notebook 367426 xx1

Broadcom Corporation Broadcom 802.11a/g Mini PCI Card Notebook 367426 xx1

Contents

CRN 27775 Tablet User Manual

FCC ID Filing: QDS-BRCM1014

Navigation menu

Namespaces

Views

Navigation