Broadcom BRCM1031 802.11abg/Draft 802.11n WLAN PCI-E Minicard User Manual Bear Manual
Broadcom Corporation 802.11abg/Draft 802.11n WLAN PCI-E Minicard Bear Manual
Broadcom >
Contents
Bear Manual
INSPIRON ™ SETUP GUIDE INSPIRON ™ SETUP GUIDE Model PP19S Notes, Cautions and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. __________________ Information in this document is subject to change without notice. © 2008 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, Inspiron, and YOURS IS HERE are trademarks of Dell Inc.; Intel and Atom are registered trademarks of Intel Corporation in the U.S. and other countries; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Ubuntu is a registered trademark of Canonical Ltd.; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. February 2008 P/N K621P Rev. A00 Setting Up Your Inspiron™ Mini 10 ��������������5 Software Features ���������������������������������������� 25 Before Setting Up Your Computer ���������������� 5 Solving Problems ����������������������������������������26 Connect the AC Adapter �������������������������������� 6 Network Problems ���������������������������������������� 26 Connect the Network Cable (Optional)���������� 7 Power Problems �������������������������������������������� 27 Press the Power Button���������������������������������� 8 Memory Problems ���������������������������������������� 28 Enable or Disable Wireless���������������������������� 9 Lockups and Software Problems ���������������� 29 Ubuntu® Setup�������������������������������������������������� 9 Dell Support Center �������������������������������������� 31 Microsoft® Windows® XP Setup�������������������� 9 Using Support Tools ������������������������������������31 Connect to the Internet (Optional) �������������� 10 System Messages������������������������������������������ 32 Using Your Inspiron™ Mini 10����������������������13 Hardware Troubleshooter ���������������������������� 33 Right Side Features �������������������������������������� 13 Dell Diagnostics �������������������������������������������� 34 Left Side Features������������������������������������������ 15 Restoring Your Operating System ������������36 Computer Base and Keyboard Features������ 17 Touch Pad Gestures�������������������������������������� 19 Display Features�������������������������������������������� 22 Removing and Replacing the Battery���������� 23 System Restore���������������������������������������������� 36 Using Dell™ PC Restore in Windows XP������ 38 Operating System Reinstallation������������������ 40 INSPIRON Contents Getting Help��������������������������������������������������42 Technical Support and Customer Service������������������������������������������������������������ 43 Online Services���������������������������������������������� 43 Automated Order-Status Service ���������������� 44 Product Information�������������������������������������� 44 Returning Items for Repair Under Warranty or for Credit���������������������������������������������������� 45 Before You Call���������������������������������������������� 46 Contacting Dell���������������������������������������������� 47 Finding More Information and Resources ����������������������������������������������������48 Specifications����������������������������������������������50 Index��������������������������������������������������������������60 This section provides information about setting up your Inspiron Mini 10 and connecting peripherals. Before Setting Up Your Computer When positioning your computer, ensure that you allow easy access to a power source, adequate ventilation, and a level surface to place your computer. Restricting airflow around your Inspiron Mini 10 may cause it to overheat. To prevent overheating ensure that you leave at least 10.2 cm (4 inches) at the back of the computer and a minimum of 5.1 cm (2 inches) on all other sides. You should never place your computer in an enclosed space, such as a cabinet or drawer when it is powered on. WARNING: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not place your Dell™ computer in a low-airflow environment, such as a closed briefcase, while it is powered on. Restricting the airflow can damage the computer or cause a fire. The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer. CAUTION: Placing or stacking heavy or sharp objects on the computer may result in permanent damage to the computer. INSPIRON Setting Up Your Inspiron™ Mini 10 Setting Up Your Inspiron™ Mini 10 Connect the AC Adapter Connect the AC adapter to the computer and then plug it into a wall outlet or surge protector. WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to a power strip or electrical outlet may cause fire or permanent damage to your computer. Setting Up Your Inspiron™ Mini 10 Connect the Network Cable (Optional) To use a wired network connection, connect the network cable. Setting Up Your Inspiron™ Mini 10 Press the Power Button Setting Up Your Inspiron™ Mini 10 Enable or Disable Wireless Ubuntu® Setup To turn on wireless, with the computer turned on: Your Dell computer is preconfigured with the Ubuntu operating system if you requested for Ubuntu while ordering your computer. See the Ubuntu Quick Start Guide that shipped with your computer for more operating system specific information. 1. Pressor press the the keyboard. icon on The Wireless Enable/Disable dialog box appears. 2. Select one of the following: ––Enable Bluetooth ––Enable Wireless LAN 3. Click OK. To turn off wireless, press again to turn off all radios. Microsoft® Windows® XP Setup If you ordered Windows XP operating system with your computer, it is already configured. To set up Windows XP for the first time, follow the instructions on the screen. These steps are mandatory and may take up to 15 minutes to complete. The screens will take you through several procedures including accepting license agreements, setting preferences and setting up an Internet connection. CAUTION: Do not interrupt the operating system’s setup process. Doing so may render your computer unusable. Setting Up Your Inspiron™ Mini 10 Connect to the Internet (Optional) NOTE: ISPs and ISP offerings vary by country. To connect to the Internet, you need an external modem or network connection and an Internet service provider (ISP). NOTE: If an external USB modem or WLAN adapter is not a part of your original order, you can purchase one from the Dell website at www.dell.com. Setting Up a Wired Connection in Windows XP • If you are using a dial-up connection, connect the telephone line to the external USB modem (optional) and to the telephone wall jack before you set up your Internet connection. • If you are using a DSL or cable/satellite modem connection, contact your ISP or cellular telephone service for setup instructions. 10 To complete setting up your wired internet connection, follow the instructions in “Setting Up Your Internet Connection in Windows XP” on page 11. Setting Up a Wireless Connection in Windows XP NOTE: To set up your wireless router, see the documentation that shipped with your router. Before you can use your wireless Internet connection, you need to connect to your wireless router. To set up your connection to a wireless router: 1. Save and close any open files, and exit any open programs. 2. Click Start→ Internet Explorer→ Connect to the Internet. 3. Follow the instructions on the screen to complete the setup. Setting Up Your Inspiron™ Mini 10 Setting Up Your Internet Connection in Windows XP To set up an Internet connection, perform the steps in the following section. NOTE: If you cannot connect to the Internet but have successfully connected in the past, the ISP might have a service outage. Contact your ISP to check the service status, or try connecting again later. NOTE: Have your ISP information ready. If you do not have an ISP, the Connect to the Internet wizard can help you get one. 1. Save and close any open files, and exit any open programs. 2. Click Start→ lnternet Explorer→ Connect to the Internet. 3. In the next window, click the appropriate option: a. If you do not have an ISP, click Choose from a list of Internet service providers (ISPs). b. If you have already obtained setup information from your ISP but you did not receive a setup CD, click Set up my connection manually. c. If you have a setup CD, click Use the CD I got from an ISP. NOTE: Your computer may or may not have an optical drive. Use an external optical drive or any external storage device for the procedures that involve media. 4. Click Next. 11 Setting Up Your Inspiron™ Mini 10 If you selected Set up my connection manually in step 3, continue to step 5. Otherwise, follow the instructions on the screen to complete the setup. NOTE: If you do not know which type of connection to select, contact your ISP. 5. Click the appropriate option under How do you want to connect to the Internet?, and click Next. 6. Use the setup information provided by your ISP to complete the setup. 12 INSPIRON Using Your Inspiron™ Mini 10 Your Inspiron Mini 10 has indicators and buttons that provide information and enable you to perform common tasks. The connectors on your computer provide the option of attaching additional devices. Right Side Features 13 Using Your Inspiron™ Mini 10 Audio out/Headphone connector – Connects to a pair of headphones, or sends audio to a powered speaker or sound system. Power USB connector – This connector can be used for USB devices that require more power. This connector supports up to 2 A current loading. Audio in/Microphone connector – Connects to a microphone or input signal for use with audio programs. VGA connector – Connects to a monitor or projector. Network connector – Connects your computer to a network or a broadband device if you are using a wired network. 14 Using Your Inspiron™ Mini 10 Left Side Features 15 Using Your Inspiron™ Mini 10 1 Security cable slot – Attaches a commercially available antitheft device to the computer. NOTE: Before you buy an antitheft device, ensure that it works with the security cable slot on your computer. AC adapter connector – Connects to the AC adapter to power on the computer and charge the battery. USB 2.0 connectors (2) – Connects to USB devices, such as a mouse, keyboard, printer, external drive, or MP3 player. 16 SD/SDHC/MMC/MS/MSPro – 3-in-1 Media Card Reader – Provides a fast and convenient way to view and share digital photos, music, videos, and documents stored on the following digital memory cards: • Secure Digital (SD) memory card • Secure Digital High Capacity (SDHC) card • Multimedia Card (MMC) • Memory Stick • Memory Stick PRO Using Your Inspiron™ Mini 10 Computer Base and Keyboard Features 17 Using Your Inspiron™ Mini 10 1 Power/Battery indicator light – Turns on steadily or blinks to indicate battery charge status. The light indicates the following states while charging or using the computer with: an AC adapter • Solid white – The computer is on and the battery is charging. • Blinking white – The computer is in standby mode. • Off – The computer is off or in hibernate mode and the battery is adequately charged. a battery • Solid white – The computer is on. • Blinking white – The computer is in standby mode. • Blinking amber – The battery charge is low. Connect the AC adapter to charge the battery. • Off – The computer is off or in hibernate mode. 18 2 Keyboard – Settings for this keyboard can be personalized by using the system setting utility. 3 Touch pad buttons – Provides left- and right-click functions like those on a mouse. 4 Touch pad – Provides the functionality of a mouse. It supports the Scroll, Flick, Zoom, Rotate, Desktop, and My Favorites features. For more information, see “Touch Pad Gestures” on page 19. Using Your Inspiron™ Mini 10 Touch Pad Gestures Scroll Allows you to scroll through content. The scroll feature includes: Pan – Allows you to move the focus on the selected object when the entire object is not visible. Move two fingers in the desired direction to pan scroll the selected object. Auto Scroll Vertical – Allows you to scroll up or down on the active window. Move two fingers up or down at a fast pace to activate vertical auto scrolling. Auto Scroll Horizontal – Allows you to scroll left or right on the active window. Move two fingers to your left or right at a fast pace to activate auto scrolling horizontally. Tap on the touch pad to stop auto scrolling. Flick Allows you to flip content forward or backward based on the direction of the flick. Move three fingers quickly in the desired direction to flip content in the active window. Tap on the touch pad to stop auto scrolling. 19 Using Your Inspiron™ Mini 10 Zoom Rotate Allows you to increase or decrease the magnification of the screen content. The zoom feature includes: Allows you to rotate the active content on the screen. The rotate feature includes: Pinch – Allows you to zoom in or zoom out by moving two fingers apart or bringing them closer together on the touch pad. To zoom in: Move two fingers apart to enlarge the view of the active window. To zoom out: Move two fingers close together to reduce the view of the active window. 20 Twist – Allows you to rotate active content in 90 degree increments using two fingers where one finger is anchored and the other rotates. Keeping the thumb in place, move the index finger in an arced direction right or left to rotate the selected item 90 degrees clockwise or counterclockwise. Using Your Inspiron™ Mini 10 My Favorites Allows you to open your favorite applications. Tap three fingers on the touch pad. The applications that are configured in the touch pad configuration tool launch. Desktop Allows you to minimize all open windows so that the desktop is visible. Place your hand on the touch pad in any orientation and briefly hold in place. 21 Using Your Inspiron™ Mini 10 Display Features 22 1 Microphone – Provides quality sound for audio chatting and voice recording. 2 Camera activity light – Indicates if the camera is on or off. 3 Camera – Built-in camera for video capture, conferencing, and chat. 4 Display – Your display can vary based on selections you made when purchasing your computer. For more information about displays, see the Dell Technology Guide. Using Your Inspiron™ Mini 10 Removing and Replacing the Battery purchased from Dell. Do not use batteries from other computers. WARNING: Using an incompatible battery may increase the risk of fire or explosion. This computer should only use a battery WARNING: Before removing the battery, shut down the computer, and remove external cables (including the AC adapter). 23 Using Your Inspiron™ Mini 10 To remove the battery: 1. Shut down the computer and turn it over. 2. Slide the battery lock latch until it clicks into place. 3. Slide the battery release latch to unlock position. 4. Pull the battery up and out of the battery bay. To replace the battery, slide it into the bay until it clicks into place. Then slide the battery lock latch to the lock position. 1 Battery 2 Battery release latch 3 Battery lock latch 24 Using Your Inspiron™ Mini 10 Software Features NOTE: For more information about the features described in this section, see the Dell Technology Guide on your hard drive or on the Dell Support website at support.dell.com. Customizing the Desktop in Windows XP You can customize your desktop to change the appearance, resolution, wallpaper, screensaver, and so on by accessing the Display Properties window. To access the display properties window: Productivity and Communication 1. Right-click an open area of the desktop. You can use your computer to create presentations, brochures, greeting cards, fliers, and spreadsheets depending on the applications installed in your computer. Check your purchase order for software installed on your computer. 2. Click Properties, to open the Display Properties window and learn more about your customization options. After connecting to the Internet, you can access websites, setup an e-mail account, upload and download files, and so on. Entertainment and Multimedia You can use your computer to watch videos, play games, listen to music and Internet radio stations. Backing Up Your Data on Windows XP It is recommended that you periodically back up files and folders on your computer. To back up files: 1. Click Start→ All Programs→ Accessories→ System Tools→ Backup. 2. Follow the instructions in the Back up Files wizard. 25 INSPIRON Solving Problems WARNING: Only trained service personnel should remove the computer cover. See the Service Manual on the Dell Support website at support.dell.com for advanced service and troubleshooting instructions. Network Problems Wireless Connections If the wireless network connection is lost — The wireless router is offline or wireless has been disabled on the computer. • Check your wireless router to ensure it is powered on and connected to your data source (cable modem or network hub). • Interference may be blocking or interrupting your wireless connection. Try moving the computer closer to your wireless router. 26 • Re-establish your connection to the wireless router: a. Save and close any open files, and exit any open programs. b. Click Start→ Internet Explorer→ Connect to the Internet. c. Follow the instructions on the screen to complete the setup. Wired Connections If the network connection is lost — The cable is loose or damaged. • Check the cable to ensure it is plugged in and not damaged. Solving Problems The link integrity light on the integrated network connector lets you verify that your connection is working and provides information on the status: • Green — A good connection exists between a 10-Mbps network and the computer. • Orange — A good connection exists between a 100-Mbps network and the computer. • Off — The computer is not detecting a physical connection to the network. NOTE: The link integrity light on the network connector is only for the wired network cable connection. The link integrity light does not provide status for wireless connections. Power Problems If the power light is off — The computer is either turned off or is not receiving power. • If the computer is plugged into a power strip, ensure that the power strip is plugged into an electrical outlet and that the power strip is turned on. Also bypass power protection devices, power strips, and power extension cables to verify that the computer turns on properly. • Ensure that the electrical outlet is working by testing it with another device, such as a lamp. • Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light on the AC adapter is on. If the power light is solid white and the computer is not responding — The display may not be responding. Press the power button until the computer turns off and then turn it back on. If the power light is blinking white — The computer is in standby mode. Press a key on the keyboard, move the pointer using the touch pad or a connected mouse, or press the power button to resume normal operation. 27 Solving Problems If the power light is blinking amber — A device might be malfunctioning or the battery charge is low. • If the computer is receiving electrical power, then a device might be malfunctioning or incorrectly installed. • If the battery charge is low, connect the computer to the AC adapter. If you encounter interference that hinders reception on your computer — An unwanted signal is creating interference by interrupting or blocking other signals. Some possible causes of interference are: • Power, keyboard, and mouse extension cables. • Too many devices connected to a power strip. • Multiple power strips connected to the same electrical outlet. 28 Memory Problems If you receive an insufficient memory message — • Save and close any open files and exit any open programs you are not using to see if that resolves the problem. • See the software documentation for minimum memory requirements. If necessary, install additional memory (See the Service Manual on the Dell Support website at support.dell.com). If you experience other memory problems — • Ensure that you are following the memory installation guidelines (see the Service Manual on the Dell Support website at support.dell.com). • Run the Dell Diagnostics (see “Dell Diagnostics” on page 34). Solving Problems Lockups and Software Problems If the computer does not start up — Ensure that the power cable is firmly connected to the computer and to the electrical outlet. If a program stops responding — End the program: 1. Press simultaneously. 2. Click Applications. 3. Click the program that is no longer responding 4. Click End Task. If a program crashes repeatedly — Check the software documentation. If necessary, uninstall and then reinstall the program. NOTE: Software usually includes installation instructions in its documentation or on the media (CD or DVD). NOTE: Your computer may or may not have an optical drive. Use an external optical drive or any external storage device for the procedures that involve media. If the computer stops responding or a solid blue screen appears — CAUTION: You might lose data if you are unable to perform an operating system shutdown. If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press the power button for at least 8 to 10 seconds until the computer turns off and then restart your computer. If a program is designed for an earlier Microsoft® Windows® operating system — Run the Program Compatibility Wizard. The Program Compatibility Wizard configures a program so that it runs in an environment similar to non-XP operating system environments. Windows XP 1. Click Start→ All Programs→ Accessories→ Program Compatibility Wizard. 2. In the welcome screen, click Next. 29 Solving Problems 3. Follow the instructions on the screen. If you have other software problems — • Back up your files immediately. • Use a virus-scanning program to check the hard drive or CDs. • Save and close any open files or programs and shut down your computer through the Start menu. • Check the software documentation or contact the software manufacturer for troubleshooting information: ––Ensure that the program is compatible with the operating system installed on your computer. ––Ensure that your computer meets the minimum hardware requirements needed to run the software. See the software documentation for information. ––Ensure that the program is installed and configured properly. 30 ––Verify that the device drivers do not conflict with the program. ––If necessary, uninstall and then reinstall the program, Dell Support Center. ––Write down any error message that is displayed to help in troubleshooting when Contacting Dell. NOTE: The instructions in this section are for computers with Windows XP operating system installed. Dell Support Center The Dell Support Center helps you find the service, support, and system-specific information you need. For more information about Dell Support Center and available support tools, click the Services tab at support.dell.com. Click the icon in the taskbar to run the application. The home page provides links to access: • Self Help (Troubleshooting, Security, System Performance, Network/Internet, Backup/ Recovery, and Windows operating system) • Assistance from Dell (Technical Support with DellConnect™, Customer Service, Training and Tutorials, How-To Help with Dell on Call, and Online Scan with PCCheckUp) • About Your System (System Documentation, Warranty Information, System Information, Upgrades & Accessories) The top of the Dell Support Center home page displays your computer’s model number along with its service tag and express service code. For more information about the Dell Support Center, see the Dell Technology Guide on your hard drive or on the Dell Support website at support.dell.com. • Alerts (technical support alerts relevant to your computer) 31 INSPIRON Using Support Tools Using Support Tools System Messages If your computer has an issue or error, it may display a System Message that will help you identify the cause and action needed to resolve the issue. NOTE: If the message you received is not listed in the following examples, see the documentation for either the operating system or the program that was running when the message appeared. Alternatively see the Dell Technology Guide on your hard disk or the Dell Support website at support.dell.com. Alert! Previous attempts at booting this system have failed at checkpoint [nnnn]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support — The computer failed to complete the boot routine three consecutive times for the same error (see “Contacting Dell” on page 47 for assistance). 32 CMOS checksum error — Possible motherboard failure or RTC battery low. Replace the battery. (See the Dell Technology Guide on your hard disk or the Dell Support website at support.dell.com or see “Contacting Dell” on page 47 for assistance). Hard-disk drive (HDD) failure — Possible hard disk drive failure during POST (see “Contacting Dell” on page 47 for assistance). Hard-disk drive (HDD) read failure — Possible hard disk drive failure during HDD boot test (see “Contacting Dell” on page 47 for assistance). Keyboard failure — Keyboard failure or loose cable. No boot device available — No bootable partition on hard disk drive, the hard disk drive connector is loose, or no bootable device exists. • If the hard drive is your boot device, ensure that the connector is connected and that the drive is installed properly and partitioned as a boot device. Using Support Tools • Enter system setup and ensure that the boot sequence information is correct (see the Dell Technology Guide on your hard disk or the Dell Support website at support.dell.com). No timer tick interrupt — A chip on the system board might be malfunctioning or motherboard failure (see “Contacting Dell” on page 47 for assistance). USB over current error — Disconnect the USB device. Your USB device needs more power for it to function properly. Use an external power source to connect the USB device, or if your device has two USB cables, connect both of them. NOTICE - Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem — S.M.A.R.T error, possible hard disk drive failure. This feature can be enabled or disabled in the BIOS setup (see “Contacting Dell” on page 47 for assistance). Hardware Troubleshooter If a device is either not detected during the operating system setup or is detected but incorrectly configured, you can use the Hardware Troubleshooter to resolve the incompatibility. To start the Hardware Troubleshooter: 1. Click Start→ Help and Support. 2. Type hardware troubleshooter in the search field and press to start the search. 3. In the search results, select the option that best describes the problem and follow the remaining troubleshooting steps. 33 Using Support Tools Dell Diagnostics If you experience a problem with your computer, perform the checks in “Lockups and Software Problems” on page 29 and run the Dell Diagnostics before you contact Dell (see “Contacting Dell” on page 47) for technical assistance. It is recommended that you print these procedures before you begin. NOTE: Dell Diagnostics works only on Dell computers. NOTE: The Drivers and Utilities media is optional and may not ship with your computer. To review your computer’s configuration information, and ensure that the device that you want to test displays in the system setup program and is active. See the System Setup section in the Dell Technology Guide. Start the Dell Diagnostics from your hard drive or from the Drivers and Utilities media. 34 Starting Dell Diagnostics From Your Hard Drive The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive. NOTE: If your computer cannot display a screen image, see “Contacting Dell” on page 47. 1. Ensure that the computer is connected to an electrical outlet that is known to be working properly. 2. Turn on (or restart) your computer. 3. When the DELL™ logo appears, press immediately. Select Diagnostics from the boot menu and press . NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from the Drivers and Utilities media. Using Support Tools 4. Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive. Starting Dell Diagnostics From the Drivers and Utilities Media NOTE: Your computer may or may not have an optical drive. Use an external optical drive or any external storage device for the procedures that involves media. 1. Insert the Drivers and Utilities media. 2. Shut down and restart the computer. When the DELL logo appears, press immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. 3. When the boot device list appears, highlight CD/DVD/CD-RW and press . 4. Select the Boot from CD-ROM option from the menu that appears and press . 5. Type 1 to start the CD menu and press to proceed. 6. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer. 7. When the Dell Diagnostics Main Menu appears, select the test you want to run. 35 INSPIRON Restoring Your Operating System You can restore your operating system in the following ways: • System Restore returns your computer to an earlier operating state without affecting data files. Use System Restore as the first solution for restoring your operating system and preserving data files. • Dell Factory Image Restore returns your hard drive to the operating state it was in when you purchased the computer. This procedure permanently deletes all data on the hard drive and removes any programs installed after you received the computer. Use Dell Factory Image Restore only if System Restore did not resolve your operating system problem. • If you received an Operating System disc with your computer, you can use it to restore your operating system. However, using the 36 Operating System disc also deletes all data on the hard drive. Use the disc only if System Restore did not resolve your operating system problem. System Restore The Windows operating systems provide a System Restore option which allows you to return your computer to an earlier operating state (without affecting data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. Any changes that System Restore makes to your computer are completely reversible. CAUTION: Make regular backups of your data files. System Restore does not monitor your data files or recover them. Restoring Your Operating System NOTE: The procedures in this document were written for the Windows default view, so they may not apply if you set your Dell™ computer to the Windows Classic view. Starting System Restore in Windows XP 1. Click Start→ All Programs→ Accessories→ System Tools→ System Restore. 2. In the welcome screen, click Next. 3. Follow the instructions on the screen. Undoing the Last System Restore in Windows XP NOTE: Before you undo the last system restore, save and close all open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete. 1. Click Start→ All Programs→ Accessories→ System Tools→ System Restore. 2. In the welcome screen, click Undo my last restoration and then click Next. 3. Follow the instructions on the screen. 37 Restoring Your Operating System Using Dell™ PC Restore in Windows XP CAUTION: Using Dell PC Restore permanently deletes all data on the hard drive and removes any programs or drivers installed after you received your computer. If possible, back up the data before using these options. Use PC Restore only if System Restore did not resolve your operating system problem. NOTE: Dell PC Restore by Symantec and Dell Factory Image Restore may not be available in certain countries or on certain computers. Use Dell PC Restore only as the last method to restore your operating system. These options restore your hard drive to the operating state it was in when you purchased the computer. Any programs or files added since you received your computer—including data files—are permanently deleted from the hard drive. 38 Data files include documents, spreadsheets, e-mail messages, digital photos, music files, and so on. If possible, back up all data before using PC Restore. Using PC Restore: 1. Turn on the computer. During the boot process, a blue bar with www.dell.com appears at the top of the screen. 2. Immediately upon seeing the blue bar, press . If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. CAUTION: If you do not want to proceed with PC Restore, click Reboot. 3. Click Restore and click Confirm. The restore process takes approximately 6 to 10 minutes to complete. Restoring Your Operating System 4. When prompted, click Finish to reboot the computer. NOTE: Do not manually shut down the computer. Click Finish and let the computer completely reboot. 5. When prompted, click Yes. The computer restarts. Because the computer is restored to its original operating state, the screens that appear, such as the End User License Agreement, are the same ones that appeared the first time the computer was turned on. 6. Click Next. The System Restore screen appears and the computer restarts. After the computer restarts, click OK. 39 Restoring Your Operating System Operating System Reinstallation Before You Begin If you are considering reinstalling the Windows operating system to correct a problem with a newly installed driver, first try using Windows Device Driver Rollback. If Device Driver Rollback does not resolve the problem, then use System Restore to return your operating system to the operating state it was in before you installed the new device driver. See “System Restore” on page 36. CAUTION: Before performing the installation, back up all data files on your primary hard drive. For conventional hard drive configurations, the primary hard drive is the first drive detected by the computer. To reinstall Windows, you need the following items: • Dell Operating System disc • Dell Drivers and Utilities disc 40 NOTE: The Dell Drivers and Utilities disc contains drivers that were installed during the assembly of the computer. Use the Dell Drivers and Utilities disc to load any required drivers. Depending on the region from which you ordered your computer, or whether you requested the media, the Dell Drivers and Utilities disc and Operating System disc may not ship with your computer. Reinstalling Windows The reinstallation process can take 1 to 2 hours to complete. After you reinstall the operating system, you must also reinstall the device drivers, virus protection program, and other software. NOTE: Your computer may or may not have an optical drive. Use an external optical drive or any external storage device for the procedures that involve media. 1. Save and close any open files and exit any open programs. Restoring Your Operating System 2. Insert the Operating System disc. 3. Click Exit if the Install Windows message appears. 4. Restart the computer. 5. When the DELL logo appears, press immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. 6. When the boot device list appears, highlight CD/DVD/CD-RW Drive and press . 7. Press any key to Boot from CD-ROM. Follow the instructions on the screen to complete the installation. 41 INSPIRON Getting Help If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem: 1. See “Solving Problems” on page 26 for information and procedures that pertain to the problem your computer is experiencing. 2. See “Dell Diagnostics” on page 34 for procedures on how to run Dell Diagnostics. 3. Fill out the “Diagnostic Checklist” on page 46. 4. Use Dell’s extensive suite of online services available at Dell Support (support.dell.com) for help with installation and troubleshooting procedures. See “Online Services” on page 43 for a more extensive list of Dell Support online. 5. If the preceding steps have not resolved the problem, see “Before You Call” on page 46 and then “Contacting Dell” on page 47. 42 NOTE: Call Dell Support from a telephone near or at the computer so that the support staff can assist you with any necessary procedures. NOTE: Dell’s Express Service Code system may not be available in all countries. When prompted by Dell’s automated telephone system, enter your Express Service Code to route the call directly to the proper support personnel. If you do not have an Express Service Code, open the Dell Accessories folder, double-click the Express Service Code icon, and follow the directions. NOTE: Some of the services mentioned below are not always available in all locations outside the continental U.S. Call your local Dell representative for information on availability. Getting Help Technical Support and Customer Service Dell’s support service is available to answer your questions about Dell hardware. Our support staff use computer-based diagnostics to provide fast, accurate answers. To contact Dell’s support service, see “Before You Call” on page 46 and then see the contact information for your region or go to support.dell.com. Online Services You can learn about Dell products and services on the following websites: • www.dell.com • www.dell.com/ap (Asian/Pacific countries only) • www.dell.com/jp (Japan only) • www.dell.ca (Canada only) You can access Dell Support through the following websites and e-mail addresses: Dell Support websites • support.dell.com • support.jp.dell.com (Japan only) • support.euro.dell.com (Europe only) Dell Support e-mail addresses • mobile_support@us.dell.com • support@us.dell.com • la-techsupport@dell.com (Latin America and Caribbean countries only) • apsupport@dell.com (Asian/Pacific countries only) Dell Marketing and Sales e-mail addresses • www.euro.dell.com (Europe only) • apmarketing@dell.com (Asian/Pacific countries only) • www.dell.com/la (Latin American and Caribbean countries) • sales_canada@dell.com (Canada only) 43 Getting Help Anonymous file transfer protocol (FTP) • ftp.dell.com Log in as user: anonymous, and use your e-mail address as your password. Automated Order-Status Service To check on the status of any Dell products that you have ordered, you can go to support.dell.com, or you can call the automated order-status service. A recording prompts you for the information needed to locate and report on your order. For the telephone number to call your region, see “Contacting Dell” on page 47 for problems with your order. If you have a problem with your order, such as missing parts, wrong parts, or incorrect billing, contact Dell for customer assistance. Have your invoice or packing slip handy when you call. For the telephone number to call for your region, see “Contacting Dell” on page 47. 44 Product Information If you need information about additional products available from Dell, or if you would like to place an order, visit the Dell website at www.dell.com. For the telephone number to call for your region or to speak to a sales specialist, see “Contacting Dell” on page 47. Getting Help Returning Items for Repair Under Warranty or for Credit Prepare all items being returned, whether for repair or credit, as follows: 1. Call Dell to obtain a Return Material Authorization Number, and write it clearly and prominently on the outside of the box. NOTE: For the telephone number to call for your region, see “Contacting Dell” on page 47. 2. Include a copy of the invoice and a letter describing the reason for the return. 3. Include a copy of the Diagnostics Checklist (see Dell Diagnostics” on page 34), indicating the tests that you have run and any error messages reported by the Dell Diagnostics (see Dell Diagnostics” on page 34). 4. Include any accessories that belong with the item(s) being returned (power cables, software, guides, and so on) if the return is for credit. 5. Pack the equipment to be returned in the original (or equivalent) packing materials. NOTE: You are responsible for paying shipping expenses. You are also responsible for insuring any product returned, and you assume the risk of loss during shipment to Dell. Collect On Delivery (C.O.D.) packages are not accepted. NOTE: Returns that are missing any of the preceding requirements will be refused at Dell’s receiving dock and returned to you. 45 Getting Help Before You Call NOTE: Have your Express Service Code ready when you call. The code helps Dell’s automated-support telephone system direct your call more efficiently. You may also be asked for your Service Tag (located on the back or bottom of your computer). Remember to fill out the following Diagnostics Checklist. If possible, turn on your computer before you call Dell for assistance and call from a telephone at or near the computer. You may be asked to type some commands at the keyboard, relay detailed information during operations, or try other troubleshooting steps possible only at the computer itself. Ensure that the computer documentation is available. Diagnostic Checklist • Name: • Date: • Address: • Phone number: • Service Tag (bar code on the back or bottom of the computer): • Express Service Code: • Return Material Authorization Number (if provided by Dell support technician): • Operating system and version: • Devices: • Expansion cards: • Are you connected to a network? Yes /No • Network, version, and network adapter: • Programs and versions: 46 Getting Help See your operating system documentation to determine the contents of the computer’s start-up files. If the computer is connected to a printer, print each file. Otherwise, record the contents of each file before calling Dell. • Error message, beep code, or diagnostic code: • Description of problem and troubleshooting procedures you performed: Contacting Dell For customers in the United States, call 800-WWW-DELL (800-999-3355). To contact Dell for sales, technical support, or customer service issues: 1. Visit support.dell.com. 2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page. 3. Click Contact Us on the left side of the page. 4. Select the appropriate service or support link based on your need. 5. Choose the method of contacting Dell that is convenient for you. NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephonebased support and service options. Availability varies by country and product, and some services may not be available in your area. 47 INSPIRON Finding More Information and Resources If you need to: See: reinstall your operating system. the Operating System media. run a diagnostic program for your computer, reinstall desktop system software, or update drivers for your computer, and readme files. the Drivers and Utilities media. learn more about your operating system, maintaining peripherals, RAID, Internet, Bluetooth®, networking, and e-mail. the Dell Technology Guide installed on your hard drive. upgrade your computer with new or additional memory, or a new hard drive. the Service Manual on the Dell Support website at support.dell.com reinstall or replace a worn or defective part. 48 NOTE: Drivers and documentation updates can be found on the Dell™ Support website at support.dell.com. NOTE: In some countries, opening and replacing parts of your computer may void your warranty. Check your warranty and return policies before working inside your computer. Finding More Information and Resources If you need to: See: find safety best practices information for your computer the safety and regulatory documents that shipped with your computer and also see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. review Warranty information, Terms and Conditions (U.S. only), Safety instructions, Regulatory information, Ergonomics information, and End User License Agreement. find your Service tag/Express Service Code— You must use the service tag to identify your computer on support.dell.com or to contact technical support. the back or bottom of your computer. find drivers and downloads. the Dell™ Support website at support.dell.com. access technical support and product help. check on your order status for new purchases. find solutions and answers to common questions. locate information for last-minute updates about technical changes to your computer or advanced technical-reference material for technicians or experienced users. 49 INSPIRON Specifications System model Processor Inspiron Mini 10 Type Intel® Atom™ N270 L2 Cache 512 KB External bus frequency 533 MHz This section provides information that you may need when setting up, updating drivers for, and upgrading your computer. NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start→ Help and Support and select the option to view information about your computer. 50 Memory Connectors two internally-accessible SO-DIMM sockets Capacities 512 MB and 1 GB Memory type DDR2-800 (Run @ DDR2-533 MHz) Memory configuration possible 512 MB, 1 GB Specifications Computer information Communications System Chipset Intel 945GSE UMA Data bus width 64 bits DRAM bus width single channel 64-bit buses Processor address bus width 32 bits Flash EEPROM 1 MB PCI Bus 32 bits Modem (optional) type External V.92 56K USB Modem Modem interface Universal Serial Bus (USB) Network adapter 10/100 Ethernet LAN on system board Wireless internal WLAN (Mini-Card) with WiFi bgn, Bluetooth® wireless technology Internal storage Type Capacity 2.5’’ HDD SATA 120 GB or 160 GB @ 5400 rpm 2.5’’ SSD (Solid-state drive) MLC 8 GB or 16 GB 51 Specifications Video Audio video controller Intel 945GSE UMA video memory 8 MB system memory (shared) LCD interface LVDS Audio Audio type 2 channel High Definition Audio Audio controller Realtek ALC268 Stereo conversion 24-bit (analog-todigital and digital-toanalog) Internal Interface Intel High Definition Audio 52 External Interface microphone-in connector, stereo headphones/ speakers connector, digital MIC with camera module Speaker two 1.0 watt speakers Internal speaker amplifier 1 watt per channel Volume controls software program controlled Specifications Ports and connectors Display Audio microphone connector, one stereo headphones/ speakers connector, digital MIC with camera module Type (TrueLife) Height 222.72 mm (8.76 in) one full size Mini Card slot and one half size Mini Card slot, the half size slot supports dual interface and the full size slots support USB only Width 125.28 mm (4.93 in) Diagonal 255.52 mm (10.06 in) Maximum resolution 1024 x 576 Refresh rate 60 Hz Network adapter RJ45 port Operating angle 0° (closed) to 135° USB two 4-pin USB 2.0-compliant connectors Luminance 162 min. 180 typ. cd/m² (5 point avg) Mini-Card 10.1 inch WSVGA Dimensions: one 4-pin power USB 2.0-compliant connector Video 15-hole connector 53 Specifications Display Camera Viewing Angles: Pixel 1.3 megapixel Horizontal ±40° (CR ≥ 10) typ. WSVGA AG Video resolution 320 x 240 ~1280 x 1024 (640 x 480 at 30 fps) Vertical +10° - +30° (CR ≥ 10) typ. WSVGA Diagonal viewing angle 66° Pixel pitch 0.2175 x 0.2175 mm Controls brightness can be controlled through keyboard shortcuts (see Dell Technology Guide for more information) 54 Touch pad X/Y position resolution (graphics table mode) 240 cpi Size: Width 78.5 mm (3.09 inches) sensor-active area Height 38 mm (1.49 inches) rectangle Specifications Battery Battery Type 3-cell/6-cell lithium ion Voltage Depth 23.1 mm (0.91 inches) (3-cell) Charge time (approximate): 45.62 mm (1.80 inches) (6-cell) Height 39.04 mm (1.54 in) (3-cell) 45.7 mm (1.8 in) (6-cell) Width 204.14 mm (8.04 in) (3-cell) 214.0 mm (8.42 in) (6-cell) Weight Computer off 11.1 VDC (3/6-cell) 3.0 hours (3-cell) 4.0 hours (6-cell) Operating 0° to 35°C (32° to 95°F) Storage – Coin-cell battery CR-2032 40° to 65°C (–40° to 149°F) AC adapter Input voltage 100–240 VAC 0.165 kg (0.36 lb) (3-cell) Input current (maximum) 0.8A 0.350 kg (0.77 lb) (6-cell) Input frequency 50–60 Hz 55 Specifications AC adapter AC adapter Output power 30 W 30 W PI Output current 1.58 A (continuous) Height 62.0 mm (2.44 inches) Rated output voltage 19.0 VDC Width 38.9 mm (1.53 inches) Dimensions: Depth 78.0 mm (3.07 inches) 30 W APD Weight (with cables) 0.185 kg (0.41 lb) Height 63.2 mm (2.5 inches) 30 W Delta Width 34.0 mm (1.34 inches) Height 59.2 mm (2.33 inches) Depth 85.0 mm (3.35 inches) Width 34.0 mm (1.34 inches) Weight (with cables) 0.19 kg (0.42 lb) Depth 85.0 mm (3.35 inches) Weight (with cables) 0.205 kg (0.45 lb) 56 Specifications Physical Computer environment Height 25.0 mm to 28.0 mm (0.98 in to 1.10 inches) Width 261 mm (10.27 inches) Depth 182 mm (7.16 inches) Weight (with 3-cell battery): Configurable to less than Temperature range: Operating 0° to 35°C (32° to 95°F) Storage –20° to 65°C (–4° to 149°F) Relative humidity (maximum): 1.30 kg (2.86 lb) Operating 10% to 90% (noncondensing) Storage 5% to 90% (noncondensing) Maximum vibration (using a random-vibration spectrum that simulates user environment): Operating 0.66 GRMS Storage 1.3 GRMS 57 Specifications Computer environment Maximum shock (measured with hard drive in head-parked position and a 2-ms half-sine pulse): Operating 110 G Storage 160 G 58 Specifications 59 INSPIRON Index AC adapter size and weight 56 damage, avoiding 5 Dell Factory Image Restore 36 airflow, allowing 5 Dell Support Center 31 Dell support website 49 backups creating 25 Dell Technology Guide for further information 48 Diagnostic Checklist 46 drivers and downloads 49 calling Dell 46 chipset 51 computer, setting up 5 connect(ing) to the Internet 10 e-mail addresses for technical support 43 expansion bus 51 Contacting Dell online 47 customer service 43 finding more information 48 60 Index FTP login, anonymous 44 setup 9 hardware problems network connection diagnosing 33 Hardware Troubleshooter 33 fixing 26 network speed help getting assistance and support 42 testing 26 order status 44 Internet connection 10 ISP Internet Service Provider 10 memory problems solving 28 memory support 50 power problems, solving 27 power strips, using 6 problems, solving 26 processor 50 products information and purchasing 44 Microsoft® Windows® XP 61 Index reinstalling Windows 36 technical support 43 resources, finding more 48 ventilation, ensuring 5 setup, before you begin 5 shipping products for return or repair 45 software features 25 software problems 29 solving problems 26 specifications 50 support e-mail addresses 43 support sites worldwide 43 System Messages 32 system reinstall options 36 System Restore 36 62 warranty returns 45 Windows, reinstalling 36 Windows XP 29 wired network network cable, connecting 7 wireless network connection 26 Index 63 Printed in China. Printed on recycled paper. www.dell.com | support.dell.com 0R891KA00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24 Instance ID : uuid:82eda40f-1bc7-4153-a329-b99613347bfc Document ID : adobe:docid:indd:db8b8fa4-e443-11dd-a446-fa9b2617987c Rendition Class : proof:pdf Derived From Instance ID : db8b8fa3-e443-11dd-a446-fa9b2617987c Derived From Document ID : adobe:docid:indd:6f5689d6-e133-11dd-ba62-b8049a31de6d Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 203.19 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 203.19 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:07CFB5279BB0DD119167EC66BC07AECF, uuid:F0C683B006DEDD11B553E9E45A7F901F, uuid:7C138ABA07DEDD11B553E9E45A7F901F, uuid:F5F8D6E305DEDD11B553E9E45A7F901F, uuid:E7C683B006DEDD11B553E9E45A7F901F, uuid:989BF93206DEDD11B553E9E45A7F901F, uuid:969BF93206DEDD11B553E9E45A7F901F, uuid:7D138ABA07DEDD11B553E9E45A7F901F, uuid:9C9BF93206DEDD11B553E9E45A7F901F, uuid:9C8D749D93E0DD11A2CBF6B4B3493F40, uuid:3003537236C0DC11AF6DB7F1C9F3F83B Manifest Reference Document ID : uuid:06CFB5279BB0DD119167EC66BC07AECF, uuid:999BF93206DEDD11B553E9E45A7F901F, uuid:F1C683B006DEDD11B553E9E45A7F901F, uuid:F4F8D6E305DEDD11B553E9E45A7F901F, uuid:9D9BF93206DEDD11B553E9E45A7F901F, uuid:979BF93206DEDD11B553E9E45A7F901F, uuid:959BF93206DEDD11B553E9E45A7F901F, uuid:FCF8D6E305DEDD11B553E9E45A7F901F, uuid:9B9BF93206DEDD11B553E9E45A7F901F, uuid:E8C683B006DEDD11B553E9E45A7F901F, uuid:2F03537236C0DC11AF6DB7F1C9F3F83B Create Date : 2009:01:19 12:21:40+05:30 Modify Date : 2009:01:19 12:21:48+05:30 Metadata Date : 2009:01:19 12:21:48+05:30 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 5774 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 68 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools