Broadcom BRCM1078 Broadcom Bluetooth Module User Manual

Broadcom Corporation Broadcom Bluetooth Module regulatory user guide

a href="https://usermanual.wiki/Broadcom" itemprop="url"> Broadcom >

Installation manual

OEM Installation Guidance Document For Broadcom BCM20732S FCC ID: QDS-BRCM1078; IC: 4324A-BRCM1078  Page 1 of 5  Conditions on using BRCM regulatory approvals:   A.  Customer must ensure that its product (the “CUSTOMER Product”) is electrically identical to Broadcom’s product. Customer acknowledges that any modifications to Broadcom’s product may invalidate regulatory approvals in relation to the CUSTOMER Product, or may necessitate notifications to the relevant regulatory authorities.   B.   OEMs must inform Broadcom of any changes which may require the Class I or Class II permissive changes for the FCC. Any substituted antenna and RF cable assemblies must be approved by Broadcom in order to maintain compliance.  C.  Appropriate labels must be affixed to the CUSTOMER Product that comply with  applicable regulations in all respects.    D.   A user’s manual or instruction manual must be included with the customer product that contains the text as required by applicable law. Without limitation of the foregoing, an example (for illustration purposes only) of possible text to include is set forth below:    1. USA—Federal Communications Commission (FCC)  FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:    -Reorient or relocate the receiving antenna -Increase the distance between the equipment and the receiver. -Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
Download:
Mirror Download [FCC.gov]
Document ID2112702
Application IDy+cu57oNZBXdS4dzKd1Qww==
Document DescriptionInstallation manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.08kB (76027 bits)
Date Submitted2013-11-06 00:00:00
Date Available2014-05-05 00:00:00
Creation Date2013-11-06 11:09:22
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2013-11-06 11:09:22
Document TitleMicrosoft Word - BRCM OEM installation Guide BCM20732S (LMA).doc
Document CreatorPScript5.dll Version 5.2
Document Author: aliang
FCC ID Filing: QDS-BRCM1078

Navigation menu