Broadcom BRCM1078 Broadcom Bluetooth Module User Manual Installation manual

Download:
Mirror Download [FCC.gov]
Document ID	2112702
Application ID	y+cu57oNZBXdS4dzKd1Qww==
Document Description	Installation manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.08kB (76027 bits)
Date Submitted	2013-11-06 00:00:00
Date Available	2014-05-05 00:00:00
Creation Date	2013-11-06 11:09:22
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2013-11-06 11:09:22
Document Title	Microsoft Word - BRCM OEM installation Guide BCM20732S (LMA).doc
Document Creator	PScript5.dll Version 5.2
Document Author:	aliang

OEM Installation Guidance Document
For Broadcom BCM20732S
FCC ID: QDS-BRCM1078; IC: 4324A-BRCM1078
Conditions on using BRCM regulatory approvals:
A.
Customer must ensure that its product (the “CUSTOMER Product”) is electrically
identical to Broadcom’s product. Customer acknowledges that any modifications to
Broadcom’s product may invalidate regulatory approvals in relation to the CUSTOMER
Product, or may necessitate notifications to the relevant regulatory authorities.
B.
OEMs must inform Broadcom of any changes which may require the Class I or
Class II permissive changes for the FCC. Any substituted antenna and RF cable
assemblies must be approved by Broadcom in order to maintain compliance.
C.
Appropriate labels must be affixed to the CUSTOMER Product that comply with
applicable regulations in all respects.
D.
A user’s manual or instruction manual must be included with the customer
product that contains the text as required by applicable law. Without limitation of the
foregoing, an example (for illustration purposes only) of possible text to include is set
forth below:
1. USA—Federal Communications Commission (FCC)
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is
connected.
Page 1 of 5
OEM Installation Guidance Document
For Broadcom BCM20732S
FCC ID: QDS-BRCM1078; IC: 4324A-BRCM1078
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Information to system integrators:
A. System integrators must include the FCC ID on the end product.
B. Integration into hosts other than approved host under the LMA requires
coordination with Broadcom through a Class 2 permissive change.
FCC Radio-Frequency Exposure & Approval Conditions:
1. The antenna(s) used for this transmitter must not be collocated or operating in
conjunction with any other antenna or transmitter within a host device, except in
accordance with FCC multi-transmitter product procedures.
2. Only those antennas with same type and lesser gain filed under this FCC ID
number can be used with this device.
3. The regulatory label on the final system must include the statement: “Contains
FCC ID: QDS-RBCM1078 and IC: 4324A-BRCM1078 “or using electronic
labeling method as documented in KDB 784748.
4. The final system integrator must ensure there is no instruction provided in the
user manual or customer documentation indicating how to install or remove the
transmitter module except such device has implemented two-ways authentication
between module and the host system.
5. The final host manual shall include the following regulatory statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
Page 2 of 5
OEM Installation Guidance Document
For Broadcom BCM20732S
FCC ID: QDS-BRCM1078; IC: 4324A-BRCM1078
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
2. Canada - Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
This radio transmitter, IC ID: 4324A-BRCM1078, has been approved by Industry Canada
to operate with the onboard antenna with a maximum gain of de -1.5dBi. Any other
antennas with a different type or having a gain greater than -1.5dBi are strictly prohibited
for use with this device. The required antenna impedance is 50 ohms.
Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, for mobile
configurations, this device must not be co-located or operating in conjunction with any
other antenna or transmitter.
System integrators must include a label with “Contains IC: 4324A-BRCM1078” on the
end product. Industry Canada user statements should be provided in both English and
French, at the time each product is offered for sale or lease in Canada.
Integration into hosts other than approved host under the LMA requires coordination
with Broadcom through a Class 2 permissive change.
French:
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s) .
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit
Page 3 of 5
OEM Installation Guidance Document
For Broadcom BCM20732S
FCC ID: QDS-BRCM1078; IC: 4324A-BRCM1078
pas provoquer d'interférences et ( 2) cet appareil doit accepter toute interférence , y
compris celles pouvant causer un mauvais fonctionnement de l'appareil.
Conformément à la réglementation d'Industrie Canada, cet émetteur radio ne peut
fonctionner à l'aide d'une antenne d'un type et maximum ( ou moins ) Gain approuvé pour
l'émetteur par Industrie Canada. Pour réduire le risque d'interférence avec d'autres
utilisateurs, le type d'antenne et son gain doivent être choisis afin que la puissance
isotrope rayonnée équivalente (PIRE ) ne dépasse pas ce qui est nécessaire pour une
communication réussie .
Cet émetteur radio , IC ID: 4324A - BRCM1078 , a été approuvé par Industrie Canada
pour fonctionner avec l'antenne à bord avec un gain maximum de de- 1.5dBi . Tous les
autres antennes avec un type différent ou ayant un gain supérieur à - 1.5dBi sont
strictement interdits pour une utilisation avec cet appareil. L'impédance d'antenne requise
est de 50 ohms.
Attention: Exposition aux radiations de fréquences radio.
Pour se conformer aux normes RSS 102 exigences de conformité d'exposition aux
radiofréquences , pour les configurations mobiles , ce dispositif ne doit pas être colocalisées ou opérant en conjonction avec une autre antenne ou transmetteur.
Les intégrateurs de systèmes doivent comporter une étiquette avec «Contient IC: 4324A BRCM1078 " sur le produit final . Comptes d'utilisateur d'Industrie Canada devraient être
fournis en anglais et en français , au moment où chaque produit est offert à la vente ou la
location au Canada.
Intégration dans des hôtes autres que l'hôte approuvé en vertu de la LMA nécessite une
coordination avec Broadcom par un changement permissive classe 2.
3. Europe - EU Restrictions
This equipment needs to be marked with the
the European community.
0984 symbol and can be used throughout
Caution: Exposure to Radio Frequency Radiation.
To comply with RF exposure compliance requirements, for mobile configurations, a
separation distance of at least 20 cm must be maintained between the antenna of this
device and all persons.
Czech:
User's Manual in Czech language and a statement of conformity with Directive
1999/5/EC in Czech language must be enclosed to each product.
Note for system integrators:
Page 4 of 5
OEM Installation Guidance Document
For Broadcom BCM20732S
FCC ID: QDS-BRCM1078; IC: 4324A-BRCM1078
- The module is tested to comply with the requirement of the R&TTE Directive. System
integrators are responsible for compliance of the final device with the R&TTE Directive.
- Packaging: CE Marking must also be on the outer packaging of the product. The outer
packaging must also provide an indication as to where the device is intended to be used
and OR conversely, where there may be restrictions for use.
4. Taiwan - NCC Statement to be included in the user guide
Statement- For general products
低功率電波輻性電機管理辦法
第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信
規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波
輻射性電機設備之干擾。
The foregoing legal communication refers to the wireless telecommunication operated
according to the telecommunications laws and regulations.
The low power frequency electric machinery should be able to tolerate the interference of
the electric wave radiation electric machineries and equipments for legal communications
or industrial and scientific applications.
Appendix:
模組認證合格標簽 (ID):
“
CCXXxxLPyyyZz＂
如果使用本模組之平台,無法在外部看見審驗合格標籤時,應在該
平台的外部明顯標示
“內含射頻模組
CCXXxxLPyyyZz” .
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 5
Producer                        : GPL Ghostscript 8.64
Create Date                     : 2013:11:06 11:09:22-08:00
Modify Date                     : 2013:11:06 11:09:22-08:00
Title                           : Microsoft Word - BRCM OEM installation Guide BCM20732S (LMA).doc
Creator                         : PScript5.dll Version 5.2
Author                          : aliang

EXIF Metadata provided by EXIF.tools