Broan Mfg 99528551 Speaker Module User Manual

Broan Mfg. Co. Inc. Speaker Module

User Manual

MODEL SPKACC
Page 1
APPLICATION
The SPKACC is a Hi-Fidelity, Bluetooth® wireless technology
enabled accessory that works with all QT-series Broan and
NuTone bath fans except: fans with humidity sensing, fans
equipped with heaters, and fans controlled with variable speed
controls.
The SPKACC can be used only with the models shown in this
chart:
ACCESSORY SPEAKER
READ AND SAVE THESE INSTRUCTIONS
Determine which MOTOR BRACKET is used in your fan.
“FLAT”
MOTOR BRACKET
“RAISED”
MOTOR BRACKET
BROAN
MODELS
NUTONE
MODELS
BROAN MODELS
CANADA
NUTONE MODELS
CANADA
QT110E QTN110E QTR090C QTN130EC
QT130E QTN110LE QTR090LC QTRN090C
QT130LE QTN130E QTR090RC QTRN110C
QT140LE QTN130LE QTR100C QTRN110LC
QT140E QTN80E QTR110C QTRN130EC
QTR080 QTN80L QTR110LC QTREN070C
QTR080L QTREN080 QTR110RC QTREN070FLC
QTR110 QTREN080FLT QTRE050RF QTREN080C
QTR110L QTREN110 QTRE070C QTREN090C
QT110LE QTREN110FLT QTRE070FLC QTREN090FLC
QTR140 QTRN080 QTRE075C QTREN110C
QTR140L QTRN080L QTRE080C QTREN110FLC
QTRE080 QTRN110 QTRE080C2S QTXEN050C
QTRE080FLT QTRN110L QTRE090C QTXEN080C
QTRE080R QTN130LE1 QTRE090FLC QTXEN090C
QTRE110 QTXEN050 QTRE110C QTXEN110C
QTRE110FLT QTXEN080 QTRE110RC QTXEN150C
QTRE110FLFT QTXEN080FLT QTRE110RF
QTXE050 QTXEN110 QTRE110FLC
QTXE080 QTXEN110FLT QTXE050C
QTXE080FLT QTXEN150 QTXE080C
QTXE110 QTXEN150FLT QTXE090C
QTXE110FLT QTREN080F QTXE110C
QTXE150 QTREN080FLFT QTXE150C
QTXE150FLT QTREN110F FQTR110C
QTR050F QTREN110FLFT FQTRE050C
QTR080F QTRN050F FQTRE070C
QTR110F QTRN080F FQTRE080C
QTRE080F QTRN110F FQTRE110C
QTRE080FLFT QTXRN000HF FQTRE110MG
QTRE110F QTXRN000HL FQTXE050C
QT80E FQTXE110C
QT80L
QT90E
QT90L
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth
®
SIG, Inc. and any use of such
marks by Broan-NuTone LLC is under license. Other trademark and trade names are those of their respective owners.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. FCC ID: 2ADLL-99528551
This Bluetooth
®
wireless technology enabled Speaker complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating instructions for satisfying exposure
compliance. This speaker must not be co-located or operate in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
NOTE: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible
for compliance. Such modifications could void the user’s authority to operate the equipment.
Video instructions also available at www.nutone.com
MODEL SPKACC
Page 2
INSTALLATION WITH “RAISED” MOTOR BRACKET
1. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS: Switch power off at service panel
and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the service
panel.
2. Remove fan GRILLE by squeezing two GRILLE SPRINGS
and sliding them out of their mounting slots on each side of
the fan housing. Disconnect LIGHT WIRE from fan (if fan is
equipped with a light). Set grille assembly aside for now.
GRILLE SPRING
GRILLE
LIGHT
WIRE
4. Partially install (2) #8-32 x 5/8 screws (included) into threaded
holes in speaker bracket - only so ends of screws are flush
with bottom surface of speaker bracket. Note: Installing
screws below flush will make the next couple of steps difficult.
5. Insert speaker into fan housing. Make sure SPEAKER
BRACKET hooks over edge of BRACKET OPENING.
6. Make sure rear surface of speaker is located as close to
wall of fan housing as possible.
7. Turn #8-32 X 5/8” SCREWS (partially installed in Step
3) until they make contact with FAN PARTITION PLATE.
Alternately tighten both screws. DO NOT OVERTIGHTEN.
8. Insert SPEAKER PLUG into power receptacle where
motor plug was disconnected.
9. Connect FAN MOTOR PLUG into SPEAKER WIRE
RECEPTACLE.
10. Plug in LIGHT WIRE (if applicable) and re-install grille that
were unplugged and removed in Step 2.
11. Turn on power to fan.
12. Go to Bluetooth® Speaker Operation section for Bluetooth®
speaker operating instructions.
SPEAKER PLUG
3. Disconnect FAN MOTOR PLUG.
BRACKET
OPENING
FAN PARTITION
PLATE
#8-32 X 5/8”
SCREWS
#8-32 X 5/8”
SCREWS
FAN MOTOR PLUG
SPEAKER WIRE
RECEPTACLE
FAN MOTOR
PLUG
MODEL SPKACC
Page 3
INSTALLATION WITH “FLAT” MOTOR BRACKET
1. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS: Switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
2. Remove fan GRILLE by squeezing two GRILLE SPRINGS
and sliding them out of their mounting slots on each side of
the fan housing. Disconnect LIGHT WIRE from fan (if fan is
equipped with a light). Set grille assembly aside for now.
GRILLE
3. Disconnect FAN MOTOR PLUG.
FAN MOTOR PLUG
4. Attach AUXILIARY BRACKET (loose bracket in parts bag)
to SPEAKER BRACKET (attached to SPEAKER MODULE).
Partially install (2) #8-32 X 3/8” SCREWS (short screws
from parts bag) through larger holes in speaker bracket and
into auxiliary bracket - only so ends of screws are flush with
bottom surface of auxiliary bracket. Note: Installing screws
below flush will make the next steps more difficult.
#8-32 X 3/8”
SCREWS
SPEAKER MODULE
AUXILIARY BRACKET SPEAKER BRACKET
5. Insert speaker into fan housing. Make sure AUXILIARY
BRACKET hooks over edge of BRACKET OPENING.
6. Make sure rear surface of speaker is located as close to
wall of fan housing as possible.
7. Secure SPEAKER BRACKET to auxiliary bracket by
tightening the #8-32 X 3/8” SCREWS (partially installed
in Step 4). Alternately tighten both screws. DO NOT
OVERTIGHTEN.
8. Secure speaker to MOTOR BRACKET by installing other
two (2) #8-32 X 3/8” SCREWS into threaded holes in
AUXILIARY BRACKET. Turn screws until they make
contact with the sheet-metal “bump” in the fan opening of
the PARTITION PLATE. Alternately tighten both screws.
DO NOT OVERTIGHTEN.
9. Insert SPEAKER PLUG into power receptacle where
motor plug was disconnected.
10. Connect FAN MOTOR PLUG into SPEAKER WIRE
RECEPTACLE.
11. Plug in LIGHT WIRE (if applicable) and re-install grille that
were unplugged and removed in Step 2.
12. Turn on power to fan.
13. Go to “Bluetooth® wireless technology SPEAKER
OPERATION” section for speaker operating instructions.
MOTOR BRACKET OPENING AUXILIARY BRACKET
#8-32 X 3/8”
SCREWS
SPEAKER BRACKET
SPEAKER PLUG
FAN MOTOR PLUG
SPEAKER WIRE
RECEPTACLE
MOTOR
BRACKET
PARTITION
PLATE
GRILLE SPRING
LIGHT
WIRE
MODEL SPKACC
Page 4
Bluetooth® wireless technology
SPEAKER OPERATION
WARRANTY
99045245B
Limited Warranty
Warranty Period and Exclusions: Broan-NuTone LLC (the “Company”) warrants to the origi-
nal consumer purchaser of its product (“you”) that the product (the “Product”) will be free
from material defects in the Product or its workmanship for a period of one (1) year from the
date of original purchase.
The limited warranty period for any replacement parts provided by the Company and for any
Products repaired or replaced under this limited warranty shall be the remainder of the original
warranty period.
This warranty does not cover speed controls, fluorescent lamp starters, tubes, halogen and
incandescent bulbs, fuses, filters, ducts, roof caps, wall caps and other accessories for ducting
that may be purchased separately and installed with the Product. This warranty also does not
cover (a)normal maintenance and service, (b)normal wear and tear, (c)any Products or parts
which have been subject to misuse, abuse, abnormal usage, negligence, accident, improper
or insufficient maintenance, storage or repair (other than repair by the Company), (d)damage
caused by faulty installation, or installation or use contrary to recommendations or instruc-
tions, (e)any Product that has been moved from its original point of installation, (f)damage
caused by environmental or natural elements, (g)damage in transit, (h)natural wear of finish,
(i)Products in commercial or nonresidential use, or (j)damage caused by fire, flood or other
act of God. This warranty covers only Products sold to original consumers in the United States
by the Company or U.S. distributors authorized by the Company.
This warranty supersedes all prior warranties and is not transferable from the original con-
sumer purchaser.
No Other Warranties: This Limited Warranty contains the Company’s sole obligation and your
sole remedy for defective products. The foregoing warranties are exclusive and in lieu of any
other warranties, express or implied. THE COMPANY DISCLAIMS AND EXCLUDES ALL OTH-
ER EXPRESS WARRANTIES, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES IMPLIED
BY LAW, INCLUDING WITHOUT LIMITATION THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. To the extent that applicable law prohibits the exclusion of
implied warranties, the duration of any applicable implied warranty is limited to the period
specified for the express warranty above. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you. Any oral or written
description of the Product is for the sole purpose of identifying it and shall not be construed
as an express warranty.
Whenever possible, each provision of this Limited Warranty shall be interpreted in such man-
ner as to be effective and valid under applicable law, but if any provision is held to be prohibited
or invalid, such provision shall be ineffective only to the extent of such prohibition or invalidity,
without invalidating the remainder of such provision or the other remaining provisions of the
Limited Warranty.
Remedy: During the applicable limited warranty period, the Company will, at its option, pro-
vide replacement parts for, or repair or replace, without charge, any Product or part thereof, to
the extent the Company finds it to be covered by and in breach of this limited warranty under
normal use and service. The Company will ship the repaired or replaced Product or replace-
ment parts to you at no charge. You are responsible for all costs for removal, reinstallation
and shipping, insurance or other freight charges incurred in the shipment of the Product or
part to the Company. If you must send the Product or part to the Company, as instructed by
the Company, you must properly pack the Product or part—the Company is not responsible
for damage in transit. The Company reserves the right to utilize reconditioned, refurbished,
repaired or remanufactured Products or parts in the warranty repair or replacement process.
Such Products and parts will be comparable in function and performance to an original Prod-
uct or part and warranted for the remainder of the original warranty period.
Exclusion of Damages: THE COMPANY’S OBLIGATION TO PROVIDE REPLACEMENT PARTS,
OR REPAIR OR REPLACE, AT THE COMPANY’S OPTION, SHALL BE YOUR SOLE AND EX-
CLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND THE COMPANY’S SOLE AND EX-
CLUSIVE OBLIGATION. THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT,
CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE
PRODUCT, ITS USE OR PERFORMANCE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights, which vary from state to state.
This warranty covers only replacement or repair of defective Products or parts thereof at the
Company’s main facility and does not include the cost of field service travel and living ex-
penses.
Any assistance the Company provides to or procures for you outside the terms, limitations
or exclusions of this limited warranty will not constitute a waiver of such terms, limitations or
exclusions, nor will such assistance extend or revive the warranty.
The Company will not reimburse you for any expenses incurred by you in repairing or replacing
any defective Product, except for those incurred with the Company’s prior written permission.
How to Obtain Warranty Service: To qualify for warranty service, you must (a)notify the Com-
pany at the address or telephone number stated below within seven (7)days of discovering the
covered defect, (b)give the model number and part identification and (c)describe the nature of
any defect in the Product or part. At the time of requesting warranty service, you must present
evidence of the original purchase date. If you cannot provide a copy of the original written lim-
ited warranty, then the terms of the Company’s most current written limited warranty for your
particular product will control.The most current limited written warranties for the Company’s
products can be found at www.broan.com .
Broan-NuTone LLC 926 West State Street Hartford, WI 53027
www.broan.com 800-637-1453
The Broan-NuTone Sensonic
™ Wireless Speaker is a state-of-the-art Bluetooth
®
wireless technology
device designed to bring you optimal high-performance audio reproduction. Some older Bluetooth
®
wireless technology devices may not properly support the latest Bluetooth innovations. If you have
difficulty using your device with the
Sensonic
™ Wireless Speaker, please try updating the software in
your device or try a different device to eliminate the problem.
To connect to the Broan-NuTone Bluetooth® wireless technology Speaker for the rst time:
1. To play your personal music or audio files, you need a Bluetooth wireless technology enabled
Smart Phone, Tablet, or any other such device.
2. Set your device to a low-to-midrange volume before connecting to the speaker.
3. Make sure Fan is ON and Bluetooth
®
wireless technology enabled device is located within 10
meters (approximately 33 feet) of the Speaker/Fan.
4. Pairing your Bluetooth
®
wireless technology enabled device with the Speaker:
a. For iPad/iPhone/iPod touch:
i. From your iPad/iPhone/iPod touch home page, tap Settings.
ii. From Settings, tap General (if you have iOS 7 or greater, you can skip this
step).
iii. From General, tap Bluetooth.
iv. Move the Bluetooth
®
Slider to ON/green (if it isn’t ON already). When you do
this, a list of discoverable Bluetooth
®
wireless technology devices will appear.
v. The Broan-NuTone Speaker has the Bluetooth
®
identifier “Sensonic™ Vent
Fan”. This identifier should be in the list of Discoverable Devices. If not,
turn the Fan OFF, then ON, then turn Bluetooth
®
OFF, then ON.
• If “Sensonic™ Vent Fan” is still not on the list, consult with the owner’s
manual for your device and follow the procedure for Pairing/Connecting
a Bluetooth
®
wireless technology device.
vi. Tap on “Sensonic™ Vent Fan” to complete the pairing of the Bluetooth
®
wire-
less technology Speaker with your Apple device.
b. For Android Phone/Tablet:
i. From your smart phone/tablet home page, tap Settings.
ii. From the Settings menu, go to Wireless & Controls, Wireless & Networks, or
something similar.
iii. Find Bluetooth
®
, Bluetooth
®
Settings or something similar and tap Bluetooth
®
or move Bluetooth
®
Slider to ON (if it isn’t on already).
iv. On the Bluetooth
®
screen, tap “Scan for Devices”, “Search for Devices” or
something similar.
v. The Broan-NuTone Speaker has the Bluetooth
®
identifier “Sensonic™ Vent
Fan”. This identifier should show up in the list of Available Devices. If not,
turn Fan OFF, then ON, and repeat pairing procedure.
• If “Sensonic™ Vent Fan” is still not on the list, consult with the owner’s
manual for your Android device and follow the procedure for
Pairing/Connecting a Bluetooth
®
device.
vi. Tap on “Sensonic™ Vent Fan” to complete the pairing of the Bluetooth
®
wire-
less technology Speaker with your Android device.
c. For all other Bluetooth
®
wireless technology enabled devices:
i. Follow the instructions that came with your Bluetooth
®
wireless technology
enabled Phone, Tablet or Pad device to set it to search for Bluetooth
®
wireless
technology accessories.
ii. Most Bluetooth
®
wireless technology enabled devices will require you to go to
the “Paired Devices” (or similar) screen and SELECT “Search for Devices” or
something similar.
iii. The Broan-NuTone Speaker has the Bluetooth
®
identifier “Sensonic™ Vent
Fan”. This identifier should show up in the list of Available Devices, Discov-
erable Devices or similar. If not, turn Fan OFF, then ON, and repeat pairing
procedure.
5. Open up the audio program on your device and play your music or other audio files. The audio
file should play over the Bluetooth
®
Fan Speakers.
6. When done playing/listening to your audio files, disconnect from the Speaker by either turning
OFF the fan, disconnecting Bluetooth
®
wireless technology from your device (Smart Phone,
Tablet, etc) or simply walking away. The Bluetooth
®
wireless technology will automatically
disconnect when the device is out of range of the Speaker, which should occur when device is
approximately 10 meters (33 feet) away from the Speaker.
To connect to the Bluetooth
®
wireless technology Speaker each subsequent time
(after initial connection is made):
1.
The Sensonic™ Speaker can only play audio files from one Bluetooth
®
wireless technology de-
vice at a time, therefore one device must be DISCONNECTED (but not necessarily UNPAIRED)
before using the Speaker with another device.
2.
If your Bluetooth
®
wireless technology device was DISCONNECTED but not UNPAIRED from
the Speaker last time it was used, then it should automatically connect next time the device
is within range of the Speaker, unless the Speaker is already CONNECTED to another device.
a. If your device does not CONNECT automatically with the Speaker, then find your
“Paired Devices” or similar list and TAP on “Sensonic Vent Fan” to reconnect with
the Sensonic™ Speaker.
3.
If your Bluetooth
®
wireless technology device was UNPAIRED from the Speaker after the last
time it was used, you must follow the connection procedure in the previous section for PAIR-
ING your device with the Speaker.
4.
Open up the audio program on your device and play your music or other audio files. The audio
file should play over the Bluetooth
®
wireless technology Fan Speakers.
5.
When done playing/listening to your audio files, disconnect from the Speaker by either turning
OFF the fan, disconnecting Bluetooth
®
wireless technology from your device (Smart Phone,
Tablet, etc) or simply walking away. The Bluetooth
®
wireless technology will automatically
disconnect when the device is out of range of the Speaker, which should occur when device is
approximately 10 meters (33 feet) away from the Speaker.

Navigation menu