Brookstone Purchasing AR128A1XXA Zoo Speaker Hat-Cat/Bunny/Panda User Manual
Brookstone Purchasing, Inc. Zoo Speaker Hat-Cat/Bunny/Panda
User Manual
SAVE THESE INSTRUCTIONS!
DANGER
To reduce the risk of electric shock,
burns, fire or injury:
1. Do not use while bathing or in a
shower.
2. Do not place or store unit where
it can fall or be pulled into a tub
or sink.
3. Do not place in, drop or submerge
in water or other liquid.
4. Do not reach for a unit that
has fallen into water. Unplug it
immediately.
5. Care should be taken so that
objects do not fall and liquids are
not spilled onto the unit.
LI-PO BATTERY WARNINGS
This device contains a Lithium-Polymer
battery. The battery must be recycled
or disposed of properly. Contact your
local waste management office for
information on battery recycling or
disposal.
Use only the supplied cable to recharge
the battery. Improper charging may
damage the battery and the device.
Do not attempt to open the
rechargeable battery or battery pack.
There are no serviceable parts inside.
Keep the battery out of reach of
children. If swallowed, consult a
physician immediately.
Do not dispose of battery in a fire as
it may explode. The battery may also
explode if damaged.
WARNING – To reduce the
risk of burns, fire, electric shock or
injury to persons:
1. Close supervision is necessary
when this appliance/product
is used by or near children or
mentally disabled individuals.
2. Use this unit only for its intended
use as described in this manual.
3. Unplug this unit during lightning
storms or when unused for long
periods of time.
4. Never drop or insert an object
into any opening.
5. Protect the power cord from being
walked on or pinched, particularly
at plug outlets, convenience
receptacles and the point where it
exits the unit.
6. Do not allow cord to touch hot
surfaces. Wrap cord loosely
around the unit when storing.
7. The unit should be situated
away from direct sunlight or heat
sources such as radiators, electric
heaters, heat registers, stoves, or
other units (including amplifiers)
that produce heat. Avoid placing
on top of stereo equipment that
radiates heat.
8. Do not overload the electrical
outlet. Use only the power source
as indicated.
9. Do not carry this unit by its cord or
use the cord as a handle.
10. Never operate this unit if it has
a damaged cord or plug, if it is
not working properly, or if it has
been dropped or damaged, or
dropped into water. If the unit’s
power supply cord or plug is
damaged, do not attempt to fix it
yourself.
11. To avoid the risk of electric shock,
do not disassemble or attempt to
repair the unit. Incorrect repair can
cause risk of electric shock or
injury to persons when the unit is
used.
12. Do not operate in the presence of
explosive and/or flammable fumes.
13. Never remove the plug from the
outlet by pulling the power cord.
FCC INFORMATION
Caution: Changes or modifications
not expressly approved by the party
responsible for compliance could
LOCATION OF PARTS
AND CONTROLS
1. Pairing LED Indicator
2. Bluetooth Button
3. Speakers On/Off Button
4. Charging LED Indicator
5. Volume - Button
6. Play/Pause/Track Forward/Track
Back Button
7. Micro USB Charging Port
8. Volume + Button
9. Speaker (2)
10. Earphone (2)
11. Micro USB Charging Cable
LOCATION OF PARTS
AND CONTROLS CHARGING THE ZUHAT
1. Plug one end of the included
Micro USB Charging Cable into
the Micro USB Charging Port
located on the right side of the
ZuHat. Plug the other end of the
Micro USB Charging Cable into a
USB adapter (5V, 1A or above)
(not included) or your computer's
USB port. The ZuHat will be fully
charged in approximately 2.5
hours.
2. The Charging LED Indicator is red
while the ZuHat is charging and
turns off when the ZuHat is fully
charged.
3. When the ZuHat’s battery is low,
the Charging LED Indicator will
flash red and the "Battery is low"
voice alert will sound.
Note: If the ZuHat is on when the
Micro USB Charging Cable is
plugged in to charge, the ZuHat is
turned off automatically.
Fold
Fold
11
void the user’s authority to operate
the equipment.
This equipment has been tested
and found to comply with the
limits for a Class B Digital Device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the distance between
the equipment and receiver.
• Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
Fold
Fold
Fold
Fold
Fold
Fold
Fold
ZuHat™
WITH WIRELESS EARPHONES
& SPEAKERS
BC
WARNING:
FCC ID: 2AFVN-AR128A1XXA
23
1
Left side
WARNING: CHOKING HAZARD – Product contains small parts.
Keep out of reach of children under 3.
LISTENING at high volumes may cause hearing damage.
FOR AGES
14 +
7
Right side
5
4
8
6
9
10
Find thousands more
great ideas online
Apple® is a trademark of Apple Inc., registered
in the U.S. and other countries.
Android™ is a trademark of Google, Inc.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth®
SIG, Inc. and any use of such marks by
Brookstone are under license.
© Brookstone 2018
This equipment complies with
Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
1. This equipment may not cause
harmful interference.
2. This equipment must accept any
interference received, including
interference that may cause
The equipment complies
with FCC exposure limits set forth for
an uncontrolled environment.
This transmitter must not be co-located
or operating in conjunction with any
other antenna or transmitter.
Notes:
• After the initial pairing of your
device, the ZuHat should
automatically pair with your
device the next time the unit is
put into Bluetooth® mode.
Depending upon your device,
you may have to select “ZuHat
XXX” in your device’s Bluetooth
menu.
• To cancel pairing mode, press
and hold the Bluetooth Button
for 2 seconds to turn off
Bluetooth mode, or wait 5
minutes for the ZuHat to cancel
pairing mode and turn off
Bluetooth mode automatically.
The Pairing LED Indicator will
turn off and the “Power Off”
voice alert will sound.
• To preserve battery life, turn
Bluetooth mode off when not
streaming audio.
COMPATIBILITY
Bluetooth 2.1 or above device with
A2DP and AVRCP.
Apple® iOS 8.0 and later.
Android™ 6.0.1 and later.
LISTENING TO AUDIO
1. Press and hold the Bluetooth
Button for 2 seconds to turn
Bluetooth mode on. The Pairing
LED Indicator will illuminate and
the “Power On” voice alert will
sound.
2. Press the Volume + Button to
increase audio volume.
3. Press the Volume - Button to
decrease audio volume.
4. Press the Play/Pause/Track
Forward/Track Back Button once
to play or pause audio.
5. Press the Play/Pause/Track
Forward/Track Back Button twice
in quick succession to move one
track forward.
6. Press Play/Pause/Track Forward/
Track Back Button three times
in quick succession to move one
track backward.
7. Press and hold the Bluetooth
Button for 2 seconds to turn
Bluetooth mode off. The Pairing
LED Indicator will turn off and
the “Power Off” voice alert will
sound.
Note: If there is no audio streaming for
20 minutes, the ZuHat is turned off
automatically.
RESET BLUETOOTH®
The ZuHat can be reset to clear the
last paired device.
1. With the ZuHat in Bluetooth
mode, press and hold the Play/
Pause/Track Forward/Track Back
Button for 5 seconds. The ZuHat
will enter Bluetooth pairing mode,
the Pairing LED Indicator will
flash blue and the “Pairing” voice
alert will sound.
2. Select “ZuHat XXX” on your
device. If prompted, use 0000
as a PIN for the pairing code.
Once “ZuHat XXX” is
selected, the Pairing LED
Indicator will change to solid
blue and the “Paired” voice alert
will sound.
Note: To pair a device that was
previously paired with the ZuHat
after performing a reset, remove
“ZuHat XXX” from your device’s
Bluetooth menu, turn Bluetooth
off and then on to refresh the
Bluetooth® menu on your device.
Select “ZuHat XXX” to pair.
CARE AND MAINTENANCE
Unplug and spot clean with a soft,
dry cloth.
CHANGING AUDIO OUTPUT
1. Press the Speakers On/Off
Button to turn the Earphones
off and turn the Speakers on.
2. Press the Speakers On/Off
Button again to turn the
Earphones on. The Speakers
remain on.
3. Press the Speakers On/Off
Button again to turn the
Earphones on and turn the
Speakers off.
INCOMING CALLS
1. To answer an incoming call on
your device, press the Play/
Pause/Track Forward/Track Back
Button once.
2. To ignore an incoming call on
your device, press and hold the
Play/Pause/Track Forward/Track
Back Button for 2 seconds.
3. To end an active call on your
device, press the Play/Pause/
Track Forward/Track Back Button
once.
FREQUENTLY ASKED
QUESTIONS
Why won’t audio play?
Ensure your device is within 33
feet of the ZuHat and reconnect
your device (please refer to pairing
instructions).
Check the ZuHat’s or your device’s
volume level.
Charge the ZuHat.
Why isn’t the audio clear?
Ensure your device is within 33 feet
of the ZuHat.
Reconnect your device to the ZuHat
(please refer to pairing instructions).
Check the ZuHat’s or your device’s
volume level.
Adjust your device’s equalizer.
Charge the ZuHat.
How do I pair a new device?
The ZuHat will remember the last
device paired. If you would like to
use another device, turn Bluetooth
off on the last device that was paired
or clear the last paired device by
resetting the ZuHat. Please refer to
reset instructions.
ONE (1) YEAR LIMITED WARRANTY
Brookstone® warrants this product against
defects in materials and/or workmanship under
normal use for a period of ONE (1) YEAR from
the date of purchase by the original purchaser
(“Warranty Period”). If a defect arises and a
valid claim is received within the Warranty
Period, at its option, Brookstone will either
1) repair the defect at no charge, using
new or refurbished replacement parts, or
2) replace the product with a new product that
is at least functionally equivalent to the original
product, or 3) if the product was purchased
through Brookstone, provide a Brookstone store
credit in the amount of the purchase price of
the original product. A replacement product or
part, including a user-installable part installed
in accordance with instructions provided by
Brookstone, assumes the remaining warranty
of the original product. When a product or part
is exchanged, any replacement item becomes
your property and the replaced item becomes
Brookstone’s property. When a store credit is
given, the original product must be returned to
Brookstone and becomes Brookstone’s property.
Obtaining Service: To obtain warranty service,
call Brookstone Limited Warranty Service at
1-800-292-9819. Please be prepared to
describe the product that needs service and
the nature of the problem. A purchase receipt
is required. All repairs and replacements must
be authorized in advance. Service options, parts
availability and response times will vary. You are
responsible for delivery and the cost of delivery of
the product or any parts to the authorized service
center for replacement, per our instructions.
Limits and Exclusions: Coverage under this
Limited Warranty is limited to the United States of
America, including the District of Columbia and the
U.S. Territories of Guam, Puerto Rico, and the U.S.
Virgin Islands. This Limited Warranty applies only
to products manufactured for Brookstone that can
be identified by the “Brookstone” trademark, trade
name, or logo affixed to them or their packaging.
The Limited Warranty does not apply to any non-
Brookstone products. Manufacturers or suppliers
other than Brookstone may provide their own
warranties to the purchaser, but Brookstone,
in so far as permitted by law, provides these
products “as is.” This warranty does not apply to:
a) damage caused by failure to follow instructions
relating to product’s use or the installation of
components; b) damage caused by accident,
abuse, misuse, fire, floods, earthquake or other
external causes; c) damage caused by service
performed by anyone who is not a representative
of Brookstone; d) accessories used in conjunction
with a covered product; e) a product or part
that has been modified to alter functionality or
capability; f) items intended to be periodically
replaced by the purchaser during the normal
life of the product including, without limitation,
batteries or light bulbs; g) any product sold
“as is” including, without limitation, floor
demonstration models and refurbished items;
or h) a product that is used commercially or for a
commercial purpose.
BROOKSTONE SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT, OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY. TO THE
EXTENT PERMITTED BY APPLICABLE LAW,
BROOKSTONE DISCLAIMS ANY AND ALL
STATUTORY OR IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE
AND WARRANTIES AGAINST HIDDEN
OR LATENT DEFECTS. IF BROOKSTONE
CANNOT LAWFULLY DISCLAIM STATUTORY
OR IMPLIED WARRANTIES, THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH
WARRANTIES SHALL BE LIMITED IN
DURATION TO THE DURATION OF THIS
EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of
incidental or consequential damages or how long
an implied warranty lasts, so the above exclusions
or limitations may not apply to you. This warranty
gives you specific legal rights and you may also
have other rights, which vary from state to state.
SPECIFICATIONS
Power Output (Earphones): 25mW (2)
Power Output (Speakers): 1.75W (2)
Earphones: 30mm driver
Speakers: 32mm driver
Frequency Response (Earphones):
160Hz-20KHz
Frequency Response (Speakers):
100Hz-20KHz
Battery Type: Li-Po, 500mAH
Range: Up to 33 ft
Charging Time: Approx. 2.5 hours
Battery Life (Earphones and speakers):
Approx. 13 hours (50% volume), 3 hours
(100% volume)
Weight (Cat): Approx 0.5lbs (226.7g)
Weight (Bunny): Approx 0.51lbs (231g)
Weight (Panda): Approx 0.5lbs (226.7g)
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
PAIRING YOUR DEVICE
1. Prepare your device to pair using
Bluetooth® wireless technology,
making sure you are within 33
feet of the ZuHat. Refer to your
device’s owner’s manual for details
if necessary.
2. Press and hold the Bluetooth
Button for 2 seconds to turn
Bluetooth mode on. The Pairing
LED Indicator will illuminate
and the "Power On" voice alert
will sound.
3. The Pairing LED Indicator will be
solid blue for 5 seconds as the
ZuHat searches for previously
paired devices.
If a connection is made, the
“Paired” voice alert will sound.
If no connection is made within
5 seconds, the ZuHat will enter
Bluetooth pairing mode. The
Pairing LED Indicator will flash
blue and the “Pairing” voice alert
will sound.
4. Once the ZuHat is in pairing
mode and your device is ready
to pair, select “ZuHat XXX” on
your device. If prompted, use
0000 as a PIN for the pairing
code. Once “ZuHat XXX" is
selected, the Pairing LED Indicator
will change to solid blue and the
“Paired” voice alert will sound.
Why is the ZuHat not showing
as an available connection in my
device’s Bluetooth® menu?
Ensure your device is within 33
feet of the ZuHat and reconnect
your device (please refer to pairing
instructions).
Charge the ZuHat.
Why won’t the ZuHat pair when I
select “ZuHat XXX” in my device’s
Bluetooth® menu?
The Bluetooth menu on your device
may need to be refreshed. Remove
“ZuHat XXX” from your device’s
Bluetooth® menu, turn Bluetooth off
and then on to refresh the Bluetooth
menu on your device. Select “ZuHat
XXX” to pair.
Why won’t the ZuHat go into
Bluetooth® pairing mode?
Charge the ZuHat.