Brookstone Grill Alert Users Manual ManualsLib Makes It Easy To Find Manuals Online!

: Brookstone Brookstone-Grill-Alert-Users-Manual-119159 brookstone-grill-alert-users-manual-119159 brookstone pdf

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

330654_INS NEW Grill Alert

3/18/05

9:21 AM

Page 1

Out of range

Three beeps; activates when transmitter and monitor are more
than 300’ apart. Shorten distance and/or check batteries.

Almost ready

Voice prompt and slow beeping; “Your entrée is almost ready.”
Sounds when current temperature is within 5 degrees of the
target temperature.

Ready

Voice prompt and fast beeping; “Your entrée is ready.” Sounds
when target temperature is reached.

Overcooking

Continuous beeping when current temperature reaches 180˚F.

grill alert™ talking
remote thermometer

CARE AND MAINTENANCE
• Do not immerse the monitor or transmitter in water or other liquid.
• Hand wash the probe with mild detergent and water. Do not machine wash.
• Wipe monitor and transmitter with a damp cloth.
• If probe becomes damaged during use, order replacement probe (330654)
through Brookstone.

Nashua, New Hampshire 03062
Customer Service 800-846-3000

330654

330654INS grill alert Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black

AUDIBLE ALARMS

330654_INS NEW Grill Alert

3/18/05

9:21 AM

Page 3

4. Press RESET.
Note: Transmitter and monitor need to be reset within 60 seconds of each
other to synchronize units and establish a signal.
Installing Batteries in Monitor
1. Slide cover and lift to open BATTERY COMPARTMENT.

330654INS grill alert Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black

2. Insert two AA batteries (not included), according to the polarities
indicated inside.
3. Press RESET.
Note: Monitor and transmitter need to be reset within 60 seconds of each
other to synchronize units and establish a signal.
4. Replace cover.
Battery Precautions

2

•

Dispose of old batteries properly. Do not dispose of old batteries in a fire.

•

Do not leave batteries lying around where a young child or pet could
play with or swallow them. If batteries are swallowed, contact a
physician immediately.

•

Batteries may explode if mistreated. Do not attempt to recharge or
disassemble batteries.

11

330654_INS NEW Grill Alert

3/18/05

9:21 AM

Page 5

7. Once you’ve established a signal, place the transmitter at your cooking
area, away from direct heat or flame.

9. Use BELT CLIP to wear the monitor, or place it on TABLE STAND within your
immediate area. Keep monitor dry and away from direct heat or flame.
10. The first voice prompt, “Your entrée is almost ready” will sound when the
current temperature is within five degrees of the target temperature.
11. The second voice prompt, “Your entrée is ready” will sound when the
target temperature is reached. Turn off voice alert by pressing any control
button on the monitor. Remove meat from the cooking surface.
12. Remove MEAT PROBE from the meat. Use caution when touching MEAT
PROBE or end of cable as they may be hot and may cause burns.
13. If current temperature surpasses the target temperature, an overcook
alarm will sound (continuous beeping). Remove meat immediately.
14. Turn off both units by pressing POWER for two seconds.

BATTERY INFORMATION
Installing Batteries in Transmitter
1. Slide cover and lift to open BATTERY COMPARTMENT.

GRILL ALERT ™ TALKING
REMOTE THERMOMETER
CONGRATULATIONS! You now own Brookstone’s Grill Alert™ Talking Remote
Thermometer—thoroughly tested to be certain it meets our own exacting
quality control standards.

330654INS grill alert Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black

8. Insert the tip of MEAT PROBE into the center of the meat.
Note: Do not rest probe wire on cooking surface.

Spend less time at the grill or oven with our wireless talking monitor that tells
you when food is cooked to perfection. It works on just about any meat:
beef, lamb, veal, hamburger, pork, turkey, chicken and fish. Just insert the
stainless steel probe into your entrée, select the type of meat and choose
how you want it cooked. The transmitter sends readings to the monitor from
up to 300' away. The bar graph tracks your cooking progress and the voice
alerts you when your entrée is “almost ready” and “ready.” Use outdoors on
your barbecue grill or indoors with your oven or stove top.
Please take a few moments to review the following important information
before using this item.
Enjoy carefree cooking!

2. Insert two AAA batteries (not included), according to the polarities
indicated inside.
3. Replace cover.
10

3

3/18/05

9:21 AM

Page 7

FCC WARNINGS
Grill Alert™ has been tested to comply with FCC standards for home or office
use. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This unit may not cause harmful interference, and
2. This unit must accept any interference received, including interference
that may cause undesired operation.

CAUTION
•

Consuming raw or undercooked meats and seafood may increase your
risk of foodborne illness.

•

Do not immerse transmitter or monitor in water or other liquid.

•

Keep transmitter and monitor away from heat and direct flame.

•

Do not expose monitor to rain or moisture.

•

Probe will be hot after use. Use care in handling to avoid burns.

•

Do not rest probe wire on cooking surface.

SAVE THESE INSTRUCTIONS
4

IMPORTANT:
For Poultry:
The Grill Alert default target temperature (170°F) is calibrated for cooking
poultry breasts and boneless roasts. For whole chickens and turkey, the
USDA recommends a minimum cooking temperature of 180°F.
For Beef, Lamb, and Veal:
The Grill Alert default target temperatures are set 10°F below the
recommended serving temperatures. These default temperatures
accommodate for additional cooking that occurs after the meat is
removed from a cooking surface and covered, known as the resting
period. The resting period, typically 10 to 20 minutes, enhances the flavor
of meat.

330654INS grill alert Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black

330654_INS NEW Grill Alert

If you are going to serve the meat without allowing for a resting period,
cook the meat 10°F higher than the indicated target temperature.
6. Choose your preferred doneness level by pressing COOK until your
desired doneness setting appears on the display: RARE, MED RARE,
MEDIUM and WELL DONE.
Note: Doneness level selection is available for BEEF, LAMB and VEAL
only. For CHICKEN, PORK, TURKEY, FISH and HAMBURGER, the unit
defaults to well done based on USDA guidelines. The bar graph
remains in the rare range until your entrée reaches its target
temperature. At this point, the graph and voice prompt will signal
that your entrée is ready.

9

3/18/05

9:21 AM

Page 9

GRILL ALERT™ OPERATION

MONITOR AND TABLE STAND

2. Turn on the transmitter by pressing and holding the POWER for two
seconds. Light will flash on LED.

A. POWER - Turns the unit on/off. Press and hold for two seconds to activate unit.

3. Turn on the monitor by pressing and holding POWER for two seconds.
The LCD SCREEN will illuminate.
4. Check RECEPTION ICON
. It indicates whether or not you’ve
established signal connection by flashing.
IMPORTANT: If you have not established a signal connection, check
the following:
• Check synchronization of transmitter and monitor by pressing both
RESET buttons within 60 seconds of each other to synchronize units
and establish signal. On the monitor, RESET is located in the battery
compartment, and on the transmitter RESET is located on the outside of
the battery compartment. (See Location of Indicators illustration on
page 7.)
• Shorten the distance between transmitter and monitor. (Maximum
transmission range is 300 feet.)
• Check batteries and replace if necessary.
5. Select the meat you are cooking by pressing SELECT until your desired
meat appears on the display: BEEF, LAMB, VEAL, HAMBURGER, PORK,
TURKEY, CHICKEN or FISH.

8

LOCATION OF INDICATORS

1. Connect MEAT PROBE CONNECTOR to TRANSMITTER SOCKET.

B. SELECT - Selects the type of meat (BEEF, LAMB, VEAL, HAMBURGER, PORK,
TURKEY, CHICKEN and FISH).
C. COOK - Selects the doneness of certain types of meat (RARE, MED RARE,
MEDIUM and WELL DONE).
D. LIGHT (

330654INS grill alert Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black

330654_INS NEW Grill Alert

) - Turns the screen backlight on for three seconds.

E. TABLE STAND - Secures the unit on a flat surface.
F. LCD SCREEN - F1-RECEPTION ICON.
F2-MEAT SELECTION
F3-DONENESS WITH BAR GRAPH
F4-TARGET TEMPERATURE
F5-CURRENT TEMPERATURE
F6-BATTERY LOW INDICATOR
G. BELT CLIP - Clips onto a belt for mobility.
H. BATTERY COMPARTMENT AND DOOR - Accommodates two AA (UM-3)
batteries (not included).
I. VOLUME (LO/HI) - Adjusts the volume for alert signals (low or high). Unit
factory-set on high.
J. RESET - Returns all settings to their original values and synchronizes the
transmitter and monitor.
5

330654_INS NEW Grill Alert

3/18/05

9:21 AM

Page 11

K. °C/°F - Selects Centigrade or Fahrenheit for temperature reading. Unit
factory-set on °F.
Note: VOLUME (LO/HI), RESET and °C/°F are located inside battery compartment.
THE TRANSMITTER AND MEAT PROBE
L. LED - Flashes to indicate the unit is on and transmitting.
M. POWER - Turns the unit on/off.
330654INS grill alert Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black

N. TRANSMITTER SOCKET - For connecting the meat probe.
O. SOCKET COVER - Protects the connector when not in use.
P. MEAT PROBE CONNECTOR - Plugs into transmitter socket.
Q. MEAT PROBE - Measures entrée temperature.
R. BATTERY COMPARTMENT AND DOOR - Accommodates two AAA (UM-4)
batteries (not included).
S. RESET - Returns all settings to their original values and synchronizes
transmitter and monitor.
Note: RESET is located inside battery compartment.

6

7



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Provided By MANUALSLIB.COM - http://www.manualslib.com/
Create Date                     : 2013:04:16 13:11:06Z
Keywords                        : manuals, instruction manuals, user manuals, service manuals, user guides, pdf manuals, owners manuals, installation guides
Modify Date                     : 2014:12:07 12:06:50+08:00
Subject                         : Search through 700.000 manuals online & and download pdf manuals.
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Provided By MANUALSLIB.COM - http://www.manualslib.com/
Description                     : Search through 700.000 manuals online & and download pdf manuals.
Title                           : ManualsLib - Makes it easy to find manuals online!
Creator Tool                    : pdftk 1.44 - www.pdftk.com
Metadata Date                   : 2014:12:07 12:06:50+08:00
Producer                        : itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Document ID                     : uuid:cd3ad21f-d3ad-0349-9e2c-cb1644f950d3
Instance ID                     : uuid:5f612e0c-8df0-4547-8dfd-224d53036f78
Page Count                      : 6

EXIF Metadata provided by EXIF.tools