Brother 5V6102 Thermal Printer with Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	336341
Application ID	tJrK2B7yNpJV/kYnzpVo4g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	95.45kB (1193092 bits)
Date Submitted	2003-06-30 00:00:00
Date Available	2003-06-30 00:00:00
Creation Date	2003-06-13 10:46:38
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-06-23 18:33:07
Document Title	Users Manual

MW-140BT_Hardware.book Page 1 Friday, June 13, 2003 10:43 AM
User’s Guide
General Description
Operating Procedures
Appendix, etc.
MW-140BT
Mobile Printer
z Before using this printer, be sure to read this User’s Guide.
z We suggest that you keep this manual in a handy place for future
reference.
MW-140BT_Hardware.book Page 2 Friday, June 13, 2003 10:43 AM
MW-140BT_Hardware.book Page i Friday, June 13, 2003 10:43 AM
Introduction
Introduction
Thank you for purchasing the MPrint MW-140BT (hereafter
referred to as “the printer”).
This monochrome thermal mobile printer is ultra-portable and
can be connected to a Pocket PC (PDA running Pocket PC) or a
computer to make quick printouts.
This User’s Guide contains operating precautions and instructions. Before using this printer, be sure to read this manual for
information on its correct operation.
In addition, we suggest that you keep this manual in a handy
place for future reference.
Declaration of Conformity
We
BROTHER INDUSTRIES, LTD.
15-1, Naesiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan
declare that the MPrint MW-140BT conforms with the following
normative documents:
EMC:
EN 55022:1998 Class B
EN 55024:1998
EN 61000-3-2:1995
EN 61000-3-3:1995
and follows the provisions of the Electromagnetic Compatibility
Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/
EEC). The optional AC adapter also conforms with EN 60950
and follows the provisions of the Low Voltage Directive 73/23/
EEC.
Issued by:
BROTHER INDUSTRIES, LTD.
P & H company
Development DIV.
MW-140BT_Hardware.book Page ii Friday, June 13, 2003 10:43 AM
{This products bearing the CE marking comply with the R&TTE
Directive (1995/5/EC), EMC Directive (89/336/EEC) and the
Low Voltage Directive (73/23/EEC) is
sued by the Commission of the European Community.
{ The contents of this manual are subject to change without notice.
{ The contents of this manual may not be duplicated or repro-
duced, partially or in full, without permission.
{ Please note that we assume no responsibility for damages
arising from earthquakes, fire, other disasters, actions of third
parties, the user’s intentional or negligent operation, misuse or
operation under other special conditions.
{ Please note that we assume no responsibility for damage
(such as losses, loss of business profits, lost profits, business
disruptions or a lost means of communication) that may result
from the use or inability to use this printer.
{ If this printer should be defective due to faulty manufacturing,
we shall replace it during the warranty period.
{ We assume no responsibility for damages that may result from
incorrect operation of this printer by connecting incompatible
equipment or using incompatible software.
{Microsoft® and Windows® are registered trademarks of
Microsoft Corporation in the United States and other countries.
{The Bluetooth® word mark and logos are owned by the Bluetooth®
SIG, Inc. and any use of such marks by Brother Industries, Ltd.
under license.
{This printer is installed with BTFront from ACCESS CO., LTD.
Copyright (C) 1996–2003 ACCESS CO., LTD.
{All other software and product names mentioned are trademarks or registered trademarks of their respective companies.
ii
MW-140BT_Hardware.book Page iii Friday, June 13, 2003 10:43 AM
Precautions
Precautions
Precautions indicated as shown below contain important safety
information and should be strictly observed.
If the printer malfunctions, immediately stop using it, and then
contact the sales representative where it was purchased.
The meanings for marks used in this manual are described below.
Failure to observe instructions marked with this symbol
Warning may result in death or serious injuries.
Failure to observe instructions marked with this symbol
Caution may result in injuries or property damage.
Meanings for symbols used in this manual
Indicates danger
Indicates danger of fire under certain circumstances
Indicates danger of electric shock under certain circumstances
Indicates danger of burns under certain circumstances
Indicates an action that must not be performed
Indicates danger of combustion if fire is nearby
Indicates danger of sustaining injuries if the indicated part of the
printer is touched
Indicates danger of injuries, such as electric shock, if the indicated part if the printer is disassembled
Indicates danger of electric shock if the operation is performed
with wet hands
Indicates danger of electric shock if the printer is exposed to
water
iii
MW-140BT_Hardware.book Page iv Friday, June 13, 2003 10:43 AM
Indicates an action that must be performed
Indicates that the power supply cord must be unplugged from the
electrical outlet
iv
MW-140BT_Hardware.book Page v Friday, June 13, 2003 10:43 AM
Precautions
Concerning this printer (including the built-in lithium ion battery)
Warning
y Do not use this printer wherever it is prohibited, for example, on an airplane, otherwise it may affect equipment,
resulting in an accident.
y If this printer is to be used in special environments, for
example, near medical equipment, make sure in advance
that there would be no harmful effects from electromagnetic waves. Please note that we assume no responsibility
for injuries resulting from interference from electromagnetic
waves.
y Do not insert foreign objects into the printer or its connectors and ports, otherwise a fire, an electric shock or damage may result.
y If foreign objects are dropped into the printer, immediately
turn it off, unplug the AC adapter from the electrical outlet,
and then contact the sales representative where it was purchased. If you continue to operate the printer, a fire, an
electric shock or damage may result.
y Do not operate, recharge or store the printer in the following locations, otherwise it may leak or fire, electric shock or
damage may result.
{Near water, such as in a bathroom or near a water
heater, or in an extremely humid location
{In a location where it is exposed to rain or moisture
{In an extremely dusty location
{In an extremely hot location, such as near flames or
heaters or in direct sunlight
{In a closed car under a hot sun
{In a location where condensation may form
MW-140BT_Hardware.book Page vi Friday, June 13, 2003 10:43 AM
Warning
y Liquid leaking from the printer may indicate that the built-in
battery is damaged. Immediately move the printer away
from flames, otherwise a fire may result.
In addition, do not touch the leaking liquid. This liquid may
damage your eyes or skin if brought in contact with them. If
the liquid makes contact with your eyes, immediately rinse
them with water and consult a medical professional. If the
liquid makes contact with your skin or clothing, immediately
rinse them with water.
y Do not try to disassemble or alter this printer, otherwise
fire, electric shock or damage may result. For servicing,
adjustments or repairs, contact the sales representative
where it was purchased. (The warranty does not cover
repairs for damage resulting from disassembly or alterations performed by the user.)
y The printer may be damaged if it is dropped or subjected to
strong shocks, for example, from being stepped on. If you
continue to operate a damaged printer, a fire or an electric
shock may result. If the printer is damaged, immediately
turn it off, unplug the AC adapter from the electrical outlet,
and then contact the sales representative where it was purchased.
y If the printer operates abnormally, for example, if it produces smoke, an unusual odor or an unusual noise, stop
using it, otherwise fire, electric shock or damage may
result. Immediately turn off the printer, unplug the AC
adapter from the electrical outlet, and then contact the
sales representative where it was purchased for repairs.
y Do not charge the printer with a charger other than that
specified.
vi
MW-140BT_Hardware.book Page vii Friday, June 13, 2003 10:43 AM
Precautions
Warning
y If the printer is not fully charged after the specified amount
of time has passed, stop charging it, otherwise fire, electric
shock or damage may result.
Caution
y Keep the printer out of the reach of children, particularly
infants, otherwise injuries may result.
y Stop operating the printer if it leaks or becomes discolored,
deformed or otherwise defective.
Others
y The built-in lithium ion battery is slightly charged so that the
operation of the printer can be verified; however, the battery should be fully charged with the AC adapter before the
printer is used.
y Do not leave the printer in a closed car under a hot sun,
otherwise it may be damaged.
y If the printer is not to be used for a long period of time, be
sure to charge the lithium ion battery at least once every
six months in order to prevent a reduction in the efficiency
and life of the battery.
y This printer is powered with a built-in lithium
ion battery. If this printer can only be used
for a short period of time, even though it is
fully charged, the battery may have reached
the end of its service life. Replace the lithium
ion battery with a new one.
Li-ion
Contact the sales representative where the
printer was purchased to have the built-in
lithium ion battery replaced.
vii
MW-140BT_Hardware.book Page viii Friday, June 13, 2003 10:43 AM
Concerning the AC adapter
Warning
y Only use the AC adapter designed specifically for this
printer, otherwise fire, electric shock or damage may result.
y Do not plug the printer into an electrical outlet other than a
household outlet (AC 100 V – 240 V), otherwise fire, electric shock or damage may result.
y Do not touch the AC adapter or the power supply plug with
wet hands, otherwise electric shock may occur.
y Do not try to disassemble, alter or repair the AC adapter,
otherwise fire, electric shock or injuries may result.
For servicing, adjustments or repairs, contact the sales
representative where the printer was purchased.
y Do not spill water or drinks, such as coffee or juice, on the
AC adapter. In addition, do not use the adapter in a location where it may get wet, otherwise combustion or electric
shock may result.
y If the power supply plug becomes dirty, for example, with
dust, unplug it from the electrical outlet, and then wipe it
with a dry cloth. If you continue to use a dirty power supply
plug, a fire may result.
viii
MW-140BT_Hardware.book Page ix Friday, June 13, 2003 10:43 AM
Precautions
Warning
y When unplugging the power supply cord, do not pull on the
cord, otherwise fire or electric shock may result.
y Do not insert foreign objects into the terminals of the AC
adapter, otherwise burns or electric shock may result.
y Incorrectly using the AC adapter may result in fire or
electric shock. Therefore, observe the following precautions.
{ Do not damage it.
{ Do not modify it.
{ Do not twist it.
{ Do not severely bend it.
{ Do not pull on it.
{ Do not place objects on it.
{ Do not subject it to heat.
{ Do not bind it.
{ Do not allow it to be
pinched.
y If the AC adapter is damaged, request a new one from the
sales representative where the printer was purchased.
y Keep the AC adapter out of the reach of children, particularly infants, otherwise injuries may result.
y Do not use the AC adapter near microwave ovens, otherwise damage may result.
y Do not use the AC adapter near flames or heaters. If the
covering of the AC adapter cord melts, fire or electric shock
may result.
y Before maintaining the printer, for example, when cleaning
it, unplug the AC adapter from the electrical outlet, otherwise electric shock may result.
ix
MW-140BT_Hardware.book Page x Friday, June 13, 2003 10:43 AM
Warning
y If the printer is not to be used for a long period of time, be
sure to unplug the AC adapter from the unit and the electrical outlet for safety reasons.
y Do not wind the AC adapter cable around the adapter or
bend the cable, otherwise the cable may be damaged.
MW-140BT_Hardware.book Page xi Friday, June 13, 2003 10:43 AM
Precautions
Operating precautions
„ Operate this printer in an environment that meets the following requirements.
{ Temperature: 0 – 40 °C
{ Humidity: 20 – 80 % (Maximum wet-bulb temperature: 27 °C)
{ Do not operate or store this printer in a location exposed to
extremely high or extremely low temperatures, extreme
humidity, extreme dust, or extreme vibrations, otherwise
the printer may be damaged or malfunction.
{ Do not use the printer in a location exposed to extreme temperature fluctuations, otherwise condensation may occur,
resulting in the printer being damaged or malfunctioning.
{ If condensation occurs, allow it to dry naturally before
operating the printer.
„ The AC adapter case and the printer may become hot while
the printer is charging or printing. This does not indicate a
malfunction.
„ When the printer is not used, unplug the power supply plug
from the electrical outlet.
„ Do not block the paper output slot.
„ If the AC adapter connector or USB port becomes dirty, incorrect connection or incorrect charging may result. Periodically
clean the connector and port with a dry cotton swab.
„ When cleaning the printer, use a soft, dry cloth. Do not use
benzene or paint thinners, otherwise the printer may become
discolored or deformed. (→ Refer to page 14.)
„ When using optional accessories, use them as described in
their instruction manuals.
„ Use thermal paper with this printer. If printed text is written
over or stamped, the text may disappear or become discolored. In addition, it may take some time for the ink to dry.
„ Do not touch the printer with wet hands.
„ Do not leave paper cassette cover open when storing as this
may cause paper misfeeding or a paper sensor error.
xi
MW-140BT_Hardware.book Page xii Friday, June 13, 2003 10:43 AM
„ Concerning the paper cassette and the handling of the paper
{ Store the paper cassette away from extremely hot,
extremely humid or extremely dusty locations and out of
direct sunlight, otherwise the paper may become discolored or a malfunction may result.
{ Be sure to close the lid of the paper cassette before storing
it, otherwise the paper may become discolored.
{ Do not leave paper cassettes in a closed car under a hot
sun, otherwise they may become discolored.
{ After opening the package of paper cassettes, close it
again as soon as possible, otherwise the paper may
become discolored.
{ Do not use paper that has been exposed to condensation.
{ Do not try to use paper transferred from one paper cassette to another, otherwise a malfunction may result.
{ Do not try to reuse paper that has already passed through
the printer, otherwise a malfunction may result.
{ Do not open the paper cassette cover or pull out or push in
the paper while the printer is printing, otherwise a malfunction may result.
{ Do not use folded, curled, cut, wet or damp paper, otherwise a paper misfeed or a malfunction may result.
{ Do not touch paper cassettes or paper with wet hands,
otherwise a malfunction may result.
{ Do not prepare or replace the paper cassette in an
extremely humid location, otherwise a malfunction may
result.
xii
MW-140BT_Hardware.book Page xiii Friday, June 13, 2003 10:43 AM
Precautions
{ Depending on the environmental conditions of the location
and the quality of the material that the adhesive-backed
paper is attached to, the adhesive-backed paper may
become discolored, peel off, be difficult to remove, leave
adhesive behind or damage the surface that it was affixed
to. Before using the adhesive-backed paper, test it by affixing a small piece to an inconspicuous area of the intended
surface.
{ Do not affix the adhesive-backed paper to people, animals
or plants. Also, do not affix it to public property or other
peoples' possessions without permission.
xiii
MW-140BT_Hardware.book Page xiv Friday, June 13, 2003 10:43 AM
xiv
MW-140BT_Hardware.book Page 1 Friday, June 13, 2003 10:43 AM
CONTENTS
CONTENTS
Introduction .......................................................... i
Precautions ......................................................... iii
Operating precautions .............................................. xi
CONTENTS ........................................................... 1
General Description ............................................ 2
Operating Procedures ......................................... 3
Charging ....................................................................3
Selecting Bluetooth communication ON/OFF ............5
Turning on/off the printer ...........................................6
Preparing the paper ...................................................7
Installing the paper cassette ......................................9
Sending data from a Pocket PC or computer ..........11
Feeding paper .........................................................13
Maintenance ............................................................14
Disposing of this printer ...........................................16
Appendix ............................................................ 17
Product specifications .............................................17
Troubleshooting .......................................................18
Indicator lights .........................................................21
MW-140BT_Hardware.book Page 2 Friday, June 13, 2003 10:43 AM
1 General Description
Right side
Paper cassette cover
Paper output slot
Left side
Status
indicator light
Charging
indicator light
Power button
Bluetooth switch
USB port
AC adapter connector
Paper check window
MW-140BT_Hardware.book Page 3 Friday, June 13, 2003 10:43 AM
Operating Procedures
2 Operating Procedures
Charging
This printer is equipped with a built-in lithium ion battery. Use the
AC adapter designed specifically for this printer to charge the
battery.
After purchasing this printer, be sure to charge the battery fully
before using it.
1 Plug the AC adapter
cable into the AC adapter
connector on the printer.
2 Plug the AC adapter plug
into a household electrical outlet (AC 100 V –
240 V).
Charging of the built-in lithium
ion battery automatically
begins.
→ The charging indicator light comes on in
orange.
→ When charging is finished, the charging
indicator light goes off.
3 After charging is finished, disconnect the AC
adapter.
MW-140BT_Hardware.book Page 4 Friday, June 13, 2003 10:43 AM
• In order to protect the circuitry, the battery cannot
be charged if the unit is in a location exposed to
extremely high or extremely low temperatures.
• Do not wind the AC adapter cable around the adapter
or bend the cable, otherwise the cable may be damaged.
• It takes approximately three hours for the battery
to be recharged from completely empty to fully
charged (with the printer turned off).
MW-140BT_Hardware.book Page 5 Friday, June 13, 2003 10:43 AM
Operating Procedures
Selecting Bluetooth communication ON/OFF
1 Using the Bluetooth
switch, select whether
or not to use Bluetooth
communication.
Bluetooth
communication ON
→ Set the switch to ON to use Bluetooth communication.
• Printing can still be carried out using USB communication even if “Bluetooth communication ON” is selected
(except during the sleep mode). (→ Refer to page 21.)
MW-140BT_Hardware.book Page 6 Friday, June 13, 2003 10:43 AM
Turning on/off the printer
1 Press and hold the power
button for a short while, until
the green or blue status indicator light illuminates.
→ When the power comes on, selecting
Bluetooth Switch ON, the status indicator
light will be blue. Selecting Bluetooth
Switch OFF, the status indicator light will
be green. (→ Refer to page 21.)
„ In order to prevent this printer from accidentally being
turned on, it will not come on if the power button is
lightly pressed. Therefore, if the printer does not come
on, hold the power button pressed for a little while.
„ In order to conserve the built-in lithium battery
during use, follow the operations below.
{ When the Bluetooth communication ON/OFF switch is
set to “ON”, the printer automatically enters the sleep
mode (→ refer to page 21) if no operation is performed or
if no data is sent to the printer within a specified time.
(The length of time [auto sleep time] until the printer automatically enters the sleep mode can be specified using
the Utility software. [→ Refer to the Software Guide.])
{ When the Bluetooth communication ON/OFF switch
is set to OFF, the printer automatically powers off if
no operation is performed or if no data is sent to the
printer for five minutes. (The length of time [auto
power-off time] until the printer automatically powers off can be specified using the Utility software.
[→ Refer to the Software Guide.])
MW-140BT_Hardware.book Page 7 Friday, June 13, 2003 10:43 AM
Operating Procedures
Preparing the paper
Use only the paper cassette designed exclusively for this printer.
Use of any other paper will result in damage.
To prepare the paper cassette
Prepare the paper cassette before installing it into the printer.
• Be careful not to drop any paper while the paper cassette is being
prepared.
1 Open the lid of the
Lid
paper cassette, and
then tear off the two
pieces (1) on the
sides.
Paper cassette
2 Firmly fold the lid back
along the fold (2).
Front
Back
3 Insert the tab on the lid
into the slit (3) at the back of the cassette.
MW-140BT_Hardware.book Page 8 Friday, June 13, 2003 10:43 AM
„ Handling the paper cassette
{ This printer determines the paper type depending
on the installed paper cassette, then automatically selects the settings appropriate for that type
of paper. Do not transfer paper to a different
paper cassette.
{ Do not try to reuse paper that has already passed
through the printer.
{ The paper cassette is made of cardboard. After
all of the paper is used, dispose of the cassette
according to local regulations.
{ Do not use a torn or deformed paper cassette,
otherwise damage may result.
{ Do not prepare the paper cassette in an
extremely humid location, otherwise a malfunction may result.
{ Do not touch paper cassettes or paper with wet
hands, otherwise a malfunction may result.
{ Store the paper cassette out of extremely hot,
extremely humid or extremely dusty locations and
out of direct sunlight.
{ When storing the paper cassette, be sure to close
its lid.
{ Do not leave paper cassettes in a closed car
under a hot sun.
{ Use the paper as quickly as possible, otherwise it
may become discolored.
MW-140BT_Hardware.book Page 9 Friday, June 13, 2003 10:43 AM
Operating Procedures
Installing the paper cassette
1 Slide the paper cassette
cover (on the top of the
printer) in direction 1.
→ The paper cassette cover
will open in the direction
indicated by 2.
2 Insert the paper cassette.
Paper type indication
The paper type indication on the
paper cassette should face up.
The end of the paper should
point toward you.
• When loading the paper cassette, make sure that
it is correctly aligned and that the end of the
paper is not folded, otherwise a paper misfeed
may result.
MW-140BT_Hardware.book Page 10 Friday, June 13, 2003 10:43 AM
3 Close the paper cassette
cover in direction 3.
4 Slide the paper cassette
Paper check window
cover in direction 4.
If the paper cassette is correctly
loaded, the paper type indication
on the cassette can be seen
through the paper check window, and the paper cassette
cover will be locked.
Paper type indication
• Do not remove the paper from the paper cassette
and load it directly into the printer.
• To change the paper type, install a different paper
cassette.
• While the printer is printing, do not apply pressure
to the paper output slot or place anything on the
printer.
Paper output slot
10
MW-140BT_Hardware.book Page 11 Friday, June 13, 2003 10:43 AM
Operating Procedures
Sending data from a Pocket PC or computer
In order use this printer to print data from a Pocket PC (PDA running Pocket PC) or computer, the software must first be installed
onto the Pocket PC or computer as described in the ‘software
guide’ supplied with the printer.
Communication using Bluetooth technology
A computer and Pocket PC with Bluetooth wireless technology
can connect to the printer using Bluetooth technology.
1 Set the computer or Pocket
PC so that Bluetooth communication will be valid
and the printer will be recognized.
(→ Refer to the Software
Guide.)
2 Start printing.
→ While data is being transmitted, the status indicator
light flashes in blue.
• Communication with the printer using Bluetooth
technology cannot be performed if the printer is
already communicating with another computer
using the USB.
• For more details, refer to the instruction manual
for the computer or the Pocket PC.
11
MW-140BT_Hardware.book Page 12 Friday, June 13, 2003 10:43 AM
Sending data through a USB
connection
Using the enclosed USB cable, this
printer can be connected to a computer or a Pocket PC supporting a
USB host interface.
Enclosed USB cable
12
MW-140BT_Hardware.book Page 13 Friday, June 13, 2003 10:43 AM
Operating Procedures
Feeding paper
If a paper misfeed occurs, remove the paper according to the following procedure.
If the paper has fed out of the paper output slot:
1 Pull the paper out from the
paper output slot.
• When pulling out the paper, be sure not to tear it.
If the paper has not fed out of the paper output slot:
1 Open the paper cassette cover.
2 Remove the paper cassette.
3 Pull out the misfed paper.
• When pulling out the paper, be sure not to tear it.
• Pulling out the paper will not affect the operation
of the printer.
13
MW-140BT_Hardware.book Page 14 Friday, June 13, 2003 10:43 AM
Maintenance
y Be sure to turn off the printer before cleaning it.
Cleaning the printer
Clean the front of the printer.
1 Clean off any dust or other dirt from the printer by
wiping it with a soft, dry cloth.
If the printer is extremely dirty, wipe it with a slightly damp
cloth.
y Do not use benzene or paint thinners, otherwise
the printer may become discolored or deformed.
Cleaning the paper cassette sensor
If the paper cassette sensor is dirty, it will not be able to correctly
detect the paper cassette, and a malfunction may result.
1 Clean the paper cassette sensor with a dry cotton
swab.
Paper cassette sensor
14
MW-140BT_Hardware.book Page 15 Friday, June 13, 2003 10:43 AM
Operating Procedures
Cleaning the pick-up roller
If the pick-up roller is dirty, paper may not be fed correctly.
1 Affix a piece of cellophane
Pick-up roller
tape to the pick-up roller.
2 Remove the cellophane
tape from the pick-up
roller.
Cellophane tape
→ Any dirt on the pick-up roller is removed with the tape.
Rotate the pick-up roller and repeat the procedure to clean
the entire surface of the roller.
15
MW-140BT_Hardware.book Page 16 Friday, June 13, 2003 10:43 AM
Disposing of this printer
Before disposing of this printer, be sure to remove the built-in
lithium ion battery.
Removing the lithium ion battery
1 Turn off the printer, and
then disconnect the AC
adapter.
2 Using a screwdriver,
loosen the four screws at
the back of the printer,
and then remove the back
cover.
Lithium ion
battery
Connector
3 Disconnect the connector, and then remove the
lithium ion battery.
• Removing the back cover will void the warranty.
Do not remove the back cover unless the printer
is to be disposed of.
• The lithium ion battery is attached to the printer
with adhesive tape. When removing the lithium
ion battery, grasp it, and then pull it off of the
printer. Be careful not to pull on the cable.
• When unplugging the connector, do not pull on
the cable.
16
MW-140BT_Hardware.book Page 17 Friday, June 13, 2003 10:43 AM
Appendix
3 Appendix
Product specifications
Printer specifications
Status indicator light (blue/green/red)
Charging indicator light (orange)
Direct thermal printing with a line thermal
Method
print head
Resolution 300 dpi × 300 dpi
15 seconds/sheet
Print speed (standard text on thermal paper with 7 % coverage at an ambient temperature of 25 °C)
No. of
Approximately 100 pages can be printed
pages that continuously if the battery is fully charged
can be
(standard text on thermal paper with 7 % covprinted
erage at an ambient temperature of 25 °C)
Paper supply
Brother paper cassette, automatic paper
method
feed mechanism
Paper
Brother A7 cut paper (74 mm × 105 mm)
Compact switching AC adapter for charging,
Power supply
lithium ion battery (built in) 780 mAh (7.4 V)
Complies with USB Ver. 1.1 and compliant
Interface
with Bluetooth ver. 1.1 class 2 serial port
profile supported
100 mm (W) × 160 mm (not including projecDimensions
tion) (D) × 17.5 mm (H)
300 g (including the built-in lithium ion batWeight
tery and a paper cassette containing 50
sheets of plain thermal paper)
Printing
Indicators
Paper sizes (print area)
Normal type
Label sheets
(four down)
Label sheets
(two down)
A7 size: 74 mm × 105 mm (69 mm × 100 mm)
74 mm × 26.25 mm (69 mm × 21.25 mm)
74 mm × 52.5 mm (69 mm × 47.5 mm)
17
MW-140BT_Hardware.book Page 18 Friday, June 13, 2003 10:43 AM
Troubleshooting
Symptoms & remedies
Symptom: The printer
Remedy: Press and hold the power button
cannot be turned on.
for a short while. (→ Refer to page 6.)
Remedy: The built-in lithium ion battery
needs recharging. (→ Refer to page 3.)
Symptom: Although the With a Bluetooth connection:
print command was Remedy: Make sure that Bluetooth communication will be valid using the setissued, the printer
tings of the computer or Pocket PC.
does not print.
(→ Refer to the Software Guide.)
Remedy: Make sure that another computer or Pocket PC is not transmitting
data to the printer using the USB or
Bluetooth.
(→ Refer to page 11.)
With a USB connection:
Remedy: Check that this printer is
securely connected to the computer
with the USB cable. (→ Refer to page
12.)
Remedy: Make sure that another computer or Pocket PC is not transmitting
data to the printer using Bluetooth.
(→ Refer to page 12.)
Symptom: There is a
paper misfeed.
Remedy: Remove the paper. (→ Refer to
page 13.)
Symptom: Even though Remedy: Some torn paper may still
remain in the printer. Contact the sales
the misfed paper was
representative where the printer was
removed, the error
purchased.
cannot be cancelled.
Symptom: An indicator Remedy: Refer to the explanation in “Indilight is lit or flashing.
cator lights” on page 21.
18
MW-140BT_Hardware.book Page 19 Friday, June 13, 2003 10:43 AM
Appendix
Symptom: The paper
does not feed.
Remedy: Make sure that the lid of the
paper cassette is firmly folded along
the fold (2). (→ Refer to page 7.)
Remedy: Make sure that the paper cassette cover is securely closed. (→
Refer to page 10.)
Remedy: The paper may be dirty. Pull out
the first sheet from the back of the
paper cassette, and then install the
paper cassette again. (→ Refer to
pages 7 and 9.)
Remedy: Clean the pick-up roller. (→
Refer to page 15.)
Symptom: The print is
faint (light).
Remedy: Make sure that the paper cassette cover is securely closed. (→
Refer to page 10.)
19
MW-140BT_Hardware.book Page 20 Friday, June 13, 2003 10:43 AM
Symptom: The paper
cassette cover cannot be closed.
Remedy: The parts indicated by “A” in the
illustration below have locked up.
Refer to the illustration and use the tip of
a ball-point pen to slide the indicated part
in the direction of the arrow to free it.
Paper cassette
cover
Push with the tip of a ball-point pen to slide it.
Free the part on the opposite side
using the same method
20
MW-140BT_Hardware.book Page 21 Friday, June 13, 2003 10:43 AM
Appendix
Indicator lights
„ Status indicator light
A blue or green light indicates the printer is
operating correctly, while a red light indicates
an error has occurred.
Indicator
light color
Indicator light
status
Printer status
Waiting to receive data using
Bluetooth or the USB
Flashing
Receiving data using Bluetooth
Sleep mode (power-saving standby
Flashing in long
condition, possible only when
intervals
receiving data using Bluetooth)
Constantly lit
Waiting to receive data
Flashing
Receiving data
Flashing
An error has occurred.
Constantly lit
A system error has occurred.
Constantly lit
Blue
Green
Red
When the status indicator light is blue, it is possible to receive data
using both the Bluetooth and USB interfaces. However, once a
connection is established using one of the interfaces, data cannot
be received using the other interface until printing is complete.
If an error has occurred, check for the following causes.
Error description
Remedy
There is no paper cassette
installed.
The paper cassette is installed
facing the wrong direction.
There is no more paper.
A paper misfeed occurred.
A transmission error occurred.
An overheat error occurred.
Correctly install a paper cassette containing paper.
Remove the misfed paper.
Check the transmission status.
The inside of the printer has started
to overheat. Wait until it cools down
21
MW-140BT_Hardware.book Page 22 Friday, June 13, 2003 10:43 AM
If a system error has occurred:
The printer may be damaged. Contact the sales representative where it was purchased.
„ Charging indicator light
With the charging indicator light, the status of
the power supply can be checked. The charging indicator light has two functions.
1 Checking the charging status (when the AC
adapter is connected)
Indicator
Indicator light
Printer status
light color
status
Orange
Constantly lit
Off
Flashing
Charging
Finished charging
Malfunctioning built-in battery
2 Checking the battery level (while running off the built-in lithium ion battery)
Indicator light status
Battery level
Off
Flashes once
Flashes twice
Continues to flash 3 times
More than 60% charged
Less than 60% charged
Less than 30% charged
Almost empty
• When the battery level is less than 60% charged,
recharge the battery.
• If the charging indicator light flashes while the
printer is printing, immediately connect the AC
adapter and charge the battery. The printer may
stop printing.
22
MW-140BT_Hardware.book Page 23 Friday, June 13, 2003 10:43 AM
Appendix
MW-140BT Accessories
Stock No.
Description
C-11
A7 Thermal paper (105 mm x 74 mm)
C-21
A7 Label (105 mm x 74 mm)
C-41
A7 Cut label sheet (4/sheet) (26.25 mm x 74 mm)
C-42
A7 Cut label sheet (2/sheet) (52.5 mm x 74 mm)
Count:
50 sheets/cassette (thermal paper)
30 sheets/cassette (all others)
23
MW-140BT_Hardware.book Page 24 Friday, June 13, 2003 10:43 AM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:06:13 10:46:38+09:00
Modify Date                     : 2003:06:23 18:33:07+09:00
Page Count                      : 40
Creation Date                   : 2003:06:13 10:46:38+09:00
Mod Date                        : 2003:06:23 18:33:07+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2003:06:23 18:33:07+09:00

EXIF Metadata provided by EXIF.tools