Brother 8V9313 Mobile Printer User Manual Short Term Confidential EN

Brother Industries, Ltd. Mobile Printer Short Term Confidential EN

Contents

(Short-Term Confidential) User Manual_EN

Product Safety Guide
PJ-722/PJ-723/PJ-762/PJ-763/
PJ-763MFi
PJ-773
Be sure to read this document before using the printer.
We recommend that you keep this document nearby for future reference.
US ENG
1
English
Introduction
Thank you for purchasing the PocketJet PJ-722/PJ-723/PJ-762/PJ-763/PJ-763MFi/PJ-773
(hereafter referred to as “the printer”)
The documentation included with the printer, including the Product Safety Guide (this document)
and the User's Guide contains operating precautions and basic instructions.
For more information, and for information about software and using the printer on a network, see
the Online User’s Guide, which can be found on the Brother Solutions Center.
The latest version of your printer's documentation is available from the Brother Solutions Center
at support.brother.com/.
Save all documentation for later reference.
Important Notice
The contents of this document are subject to change without notice.
The contents of this document may not be duplicated or reproduced, partially or in full, without
permission.
We assume no responsibility for damages arising from earthquakes, fire, other disasters,
actions of third parties, the user’s intentional or negligent operation, misuse or operation under
other special conditions.
We assume no responsibility for damage (such as losses, loss of business profits, lost profits,
business disruptions or a lost means of communication) that may result from the use or inability
to use of the printer.
If the printer should be defective due to faulty manufacturing, we shall replace or repair it during
the warranty period.
We assume no responsibility for any damages that may result from incorrect operation of the
printer caused by connecting incompatible equipment or using incompatible software.
2
To use the printer safely
If the printer malfunctions, immediately stop using it, and then contact your Brother dealer.
Symbols used in this document
The following symbols are used throughout this document:
DANGER
Indicates an imminently hazardous situation which, if the product is handled
without following the warnings and instructions, will result in death or serious
injuries.
WARNING
Indicates a potentially hazardous situation which, if the product is handled
without following the warnings and instructions, could result in death or serious
injuries.
CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injuries.
IMPORTANT Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
Indicates a risk of fire under certain circumstances
Indicates a risk of electric shock under certain circumstances
Indicates a risk of burns under certain circumstances
Indicates an action that must not be performed
Indicates a risk of combustion if fire is nearby
Indicates a risk of injury if the indicated part of the printer is touched
Indicates a risk of injury, such as electric shock, if the indicated part of the printer is disassembled
Indicates a risk of electric shock if the operation is performed with wet hands
Indicates a risk of electric shock if the printer is exposed to water
Indicates an action that must be performed
Indicates that the AC power cord must be disconnected from the electrical outlet
3
English
Important safety instructions
DANGER
Rechargeable Li-ion battery (Optional)
Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter referred
to as "rechargeable battery"). If these precautions are not followed, overheating, leaking, or cracks
in the battery may result in an electrical short, explosion, smoke, fire, electric shock, injury to
yourself or others, or damage to the product or other property.
Use the rechargeable battery only for its intended purpose. The printer and rechargeable battery
are designed to be used together exclusively. DO NOT insert the rechargeable battery into a
different printer, or a different rechargeable battery into your printer, otherwise a fire or damage
may occur.
To charge the rechargeable battery, insert it into the printer, and then use the AC adapter
designed specifically for this printer.
DO NOT charge the rechargeable battery near a fire or in direct sunlight. This could activate the
protection circuitry, which is designed to prevent danger from high heat. Activation of the
protection circuitry could cause charging to stop, charging to occur with excessive
current/voltage if the protection circuitry fails, or an abnormal chemical reaction within the
battery.
When charging the rechargeable battery, use only the battery charger designed specifically for
your rechargeable battery.
DO NOT allow wires or other metal objects to come into contact with the terminals of the
rechargeable battery. DO NOT carry or store the rechargeable battery with metal objects, such
as necklaces or hairpins. This could cause an electrical short, and metal objects such as wires,
necklaces, or hairpins to overheat.
DO NOT use or leave the rechargeable battery near fire, heaters, or other high-temperature
(above 176F/80°C) locations.
DO NOT allow the rechargeable battery to come into contact with or to be immersed in water.
DO NOT use the rechargeable battery in corrosive environments, such as areas where salty air,
salt water, acids, alkalis, corrosive gases, chemicals, or any corrosive liquid is present.
DO NOT use the rechargeable battery if it is damaged or leaking.
DO NOT directly solder any connections to the rechargeable battery. This could cause internal
insulation to melt, gas to be emitted, or safety mechanisms to fail.
DO NOT use the rechargeable battery with the polarity (+) (-) reversed. Check the orientation of
the rechargeable battery before inserting it, and do not try to force the rechargeable battery into
the printer. Charging the rechargeable battery with the polarity reversed could cause an
abnormal chemical reaction within the rechargeable battery or abnormal current flow during
discharge.
DO NOT directly connect the rechargeable battery to a household electrical supply.
4
A liquid (electrolyte) leaking from the printer or rechargeable battery may indicate that the
rechargeable battery is damaged. If the rechargeable battery leaks, immediately stop using the
printer, unplug the AC adapter, and isolate the printer by placing it in a bag.
DO NOT touch the electrolyte. If the electrolyte gets in the eyes, do not rub them. Immediately
rinse the eyes liberally with tap water or other clean water and seek the advice of a medical
professional. If left unattended, the electrolyte could cause eye damage. If the electrolyte comes
into contact with your skin or clothing, immediately rinse them with water.
DO NOT put the rechargeable battery, or a printer with the rechargeable battery installed, into
a microwave oven or high-pressure container.
DO NOT disassemble, modify, or attempt to repair the rechargeable battery.
DO NOT dispose of the rechargeable battery in fire or intentionally overheat. This could cause
the internal insulation to melt, gas to be emitted, or safety mechanisms to fail. Additionally, the
electrolyte solution could catch fire.
DO NOT puncture the rechargeable battery with any objects, subject it to severe shocks or
throw it. Damage to the rechargeable battery's protection circuit could cause the rechargeable
battery to be recharged at an abnormal current/voltage or cause an abnormal chemical reaction
within the rechargeable battery.
DO NOT leave a drained rechargeable battery in the printer for a long period of time. This could
shorten the life of the rechargeable battery or lead to an electrical short.
DO NOT incinerate the rechargeable battery or dispose of it with household waste.
If the printer can only be used for a short period of time, even though the rechargeable battery is
fully charged, the rechargeable battery may have reached the end of its service life. Replace the
rechargeable battery with a new one. When removing and replacing the rechargeable battery, cover
the terminals of the old rechargeable battery with tape to avoid creating a short in the battery.
WARNING
Printer
DO NOT use the printer where its use is prohibited, such as on an airplane because it could affect
the airplane’s equipment, resulting in an accident.
DO NOT use the printer in special environments, such as near medical equipment. Electromagnetic
waves may cause the medical equipment to malfunction.
DO NOT insert foreign objects into the printer or its connectors and ports, otherwise a fire, electric
shock, or damage may occur.
If foreign objects are dropped into the printer, immediately turn it off, disconnect the AC adapter or
Car adapter from the electrical outlet, and then contact Brother Customer Support at
1-800-255-0415. If you continue to operate the printer, a fire, electric shock, or damage may occur.
DO NOT operate, charge, or store the printer in the following locations (otherwise leaking, fire,
electric shock, or damage may occur):
Near water, such as in a bathroom or near a water heater, or in an extremely humid location
In a location where it is exposed to rain or moisture
In an extremely dusty location
In an extremely hot location, such as near open flames, heaters, or in direct sunlight
In a closed car under a hot sun
In a location where condensation may form
DANGER
5
English
DO NOT try to disassemble or alter the printer, otherwise a fire, electric shock, or damage may
occur. For servicing, adjustments or repairs, contact your Brother dealer. (The warranty does not
cover repairs for damage resulting from disassembly or alterations performed by the user.)
If the printer operates abnormally (for example, if it produces smoke, unusual odor, or noise), stop
using it, otherwise a fire, electric shock, or damage may occur. Immediately turn the printer off,
disconnect the AC adapter or Car adapter from the electrical outlet, and then contact your Brother
dealer for repairs.
DO NOT charge the rechargeable battery with a printer, AC adapter, or Car adapter other than the
one specified. A fire, electric shock, or damage may occur.
If the printer is not fully charged after the specified amount of time has passed, stop charging it,
otherwise a fire, electric shock, or damage may occur.
DO NOT place the product near chemicals or in a place where chemical spillage could occur. In
particular, organic solvents or liquids may cause the casing and/or cables to melt or dissolve, risking
a fire or electric shock. They may also cause the product to malfunction or become discolored.
DO NOT use the printer near open flames. A fire, electric shock, or damage may occur.
DO NOT spill liquids of any type on the printer.
DO NOT allow babies and children to play with the plastic bag that contained the printer. Dispose
of the bag or keep it away from babies and children. There is a risk of suffocation.
DO NOT allow organic solvents, such as benzene, thinner, polish remover, or deodorizers to come
into contact with the plastic cover. These may cause the plastic cover to warp or dissolve, resulting
in an electric shock or fire.
DO NOT dispose of the printer with household waste. There is a risk of environmental damage,
explosion, and fire.
When shipping the printer, make sure to remove the rechargeable battery before packing. If the
printer is shipped with the rechargeable battery installed, there is a risk of fire, explosion, and
damage.
WARNING
6
DO NOT use combustible sprays when cleaning the printer, and DO NOT use combustible sprays
near the printer. There is a risk of fire and electric shock.
Examples of combustible sprays:
Dust removing cleaners
Pesticides
Disinfectants and deodorizers that contain alcohol
Organic solvents or liquids such as alcohol
DO NOT allow the charging contacts or the surrounding areas to become dirty or to come into
contact with foreign objects. There is a risk of burns and damage.
DO NOT touch any metal parts near the print head. The print head becomes very hot during use
and remains very hot immediately after use. DO NOT touch it directly with your hands.
AC adapter/Car adapter (Optional)
Only use the AC adapter or Car adapter designed specifically for this printer, otherwise a fire,
electric shock, or damage may occur. The AC adapter or Car adapter is designed specifically for
use with this printer. DO NOT use with any other product.
When connecting the AC adapter or Car adapter, always push the plug into the electrical outlet as
far as it will go to ensure a solid connection, otherwise a fire, electric shock, or damage may occur.
DO NOT touch the AC adapter and the printer during a thunderstorm.
There may be a remote risk of electric shock from lightning when the printer is used during a
thunderstorm.
DO NOT allow liquids or metal objects to come into contact with the power supply plug, AC adapter,
or Car adapter. There is a risk of fire, electric shock, and damage.
When using the AC adapter, DO NOT plug the printer into an electrical outlet other than a household
outlet (AC 100 - 240 V, 50/60 Hz), otherwise a fire, electric shock, or damage may occur.
The Car adapter is designed to be used only with a DC 12 V electrical outlet. DO NOT use it with
any other type of electrical outlet.
DO NOT touch the AC adapter, Car adapter, or the power supply plug with wet hands, otherwise
an electric shock may occur.
DO NOT try to disassemble, alter, or repair the AC adapter or Car adapter, otherwise a fire, electric
shock, or injury may occur.
For servicing, adjustments or repairs, contact your Brother dealer.
DO NOT spill liquids on the AC adapter or Car adapter. In addition, DO NOT use the AC adapter or
Car adapter in a location where it may get wet, otherwise an explosion or electric shock may occur.
WARNING
7
English
If the power supply plug becomes dirty (for example, if it becomes covered with dust) disconnect it
from the electrical outlet, and then wipe it with a dry cloth. If you continue to use a dirty power supply
plug, a fire may occur.
When disconnecting the AC power cord or Car adapter from the electrical outlet, DO NOT pull on
the cord. Hold the plug and pull it out of the electrical outlet.
DO NOT insert foreign objects into the terminals of the AC adapter or Car adapter, otherwise burns
or an electric shock may occur.
Use the AC adapter or Car adapter correctly and observe the following precautions (otherwise a fire
or electric shock may occur):
DO NOT damage the AC adapter or Car adapter.
DO NOT modify the AC adapter or Car adapter.
DO NOT twist the AC adapter or Car adapter.
DO NOT severely bend the AC adapter or Car adapter.
DO NOT pull on the AC adapter or Car adapter.
DO NOT place objects on the AC adapter or Car adapter.
DO NOT subject the AC adapter or Car adapter to heat.
DO NOT bind the AC adapter or Car adapter.
DO NOT allow the AC adapter or Car adapter to be pinched.
If the AC adapter or Car adapter is damaged, please contact your Brother dealer.
Keep the AC adapter or Car adapter out of the reach of children, particularly infants, otherwise an
injury may occur.
DO NOT use the AC adapter or Car adapter near microwave ovens, otherwise damage to the AC
adapter, Car adapter, or printer may occur.
DO NOT use the AC adapter or Car adapter near flames or heaters. If the covering of the AC
adapter or Car adapter cord melts, a fire or electric shock may occur.
Before performing maintenance on the printer, such as cleaning, disconnect the AC adapter or Car
adapter from the electrical outlet, otherwise an electric shock may occur.
DO NOT allow organic solvents, such as benzene, thinner, polish remover, or deodorizers, to come
into contact with the plastic cover. These may cause the plastic cover to warp or dissolve, resulting
in an electric shock or fire.
If the printer will not be used for a long period of time, disconnect the AC adapter or Car adapter
from the printer and from the electrical outlet for safety reasons.
WARNING
8
DO NOT wind the AC adapter or Car adapter cable around the adapter or bend the cable, otherwise
the cable may be damaged.
DO NOT overload electric outlets or plug multiple devices into the same electrical outlet. There is a
risk of fire, electric shock, and damage.
DO NOT use damaged plugs or bent electric outlets. There is a risk of fire, electric shock, and
damage.
CAUTION
Printer
Keep out of the reach of children, particularly infants, otherwise an injury may occur.
Stop operating the printer if it leaks or becomes discolored, deformed, or otherwise defective.
Do not operate the printer while holding only the release cover. There is a risk of injury if the cover
detaches and the printer falls.
When connecting cables and accessories, make sure they are connected correctly and in the
correct order. Connect only the items that are designed specifically for this printer. There is a risk
of fire or injury. Refer to the instructions when connecting.
AC adapter/Car adapter (Optional)
Make sure that the AC adapter’s power cord or the Car adapter is accessible so that it can be
removed in an emergency. DO NOT place objects on or near the AC adapter’s power cord or the
Car adapter’s cord.
IMPORTANT
Printer
DO NOT remove the labels affixed to the printer. These labels provide operational information and
indicate the printer's model number.
DO NOT push the power switch with an object that has a sharp point, such as a pen. This could damage
the switch or LED.
DO NOT transport the printer while cables are connected to the AC/DC connector, USB port, or serial
port. The connector and ports could be damaged.
DO NOT store the printer in an area exposed to high temperatures, high humidity, direct sunlight, or
dust. These could cause discoloration or malfunction.
WARNING
9
English
General Precautions
Rechargeable Li-ion battery (Optional)
At the time of purchase, the rechargeable battery is slightly charged so that the operation of the printer
can be verified; however, before you use the printer for the first time, you must fully charge the battery
using the AC adapter.
If the printer will not be used for a long period of time, remove the rechargeable battery from the printer,
and then store it in a location where it is not exposed to static electricity, high humidity, or high
temperatures (temperatures between 59F/15C and 77F/25C and humidity between 40% and 60%
are recommended). To maintain the efficiency and life of the rechargeable battery, charge it at least
every six months.
If you notice anything unusual about the rechargeable battery the first time it is used, for example
overheating or rust, STOP using the battery. Contact Brother customer service.
Printer
DO NOT cover or insert foreign objects into the paper outlet, AC/DC connector or USB port.
DO NOT use paint thinner, benzene, alcohol, or any other organic solvent to clean the printer. Doing
so may damage the casing finish. Use a soft, dry cloth to clean the printer.
When using optional accessories, use them as described in their instruction manuals.
This printer uses thermal paper. If the printed paper is marked with ink, for example written on or
stamped, the ink may cause the printed text to fade or become discolored. In addition, the applied ink
may take some time to dry. Printed text may fade or become discolored if the label comes into contact
with any of the following: vinyl chloride products; leather goods, such as wallets and purses; organic
compounds, such as alcohol, ketones, or esters; adhesive tape; erasers; rubber mats; magic marker
ink; permanent marker ink; correction fluid; carbon; glue; diazo sensitized paper; hand lotion; hair care
products; cosmetics; water or sweat.
DO NOT touch the printer with wet hands.
DO NOT use folded, wet or damp paper, otherwise a paper misfeed or a malfunction may occur.
DO NOT touch paper or labels with wet hands, otherwise a malfunction may occur.
ATTENTION: (For USA and Canada)
The Lithium Ion battery you have purchased is recyclable. At the end of its useful life, under
various state and local laws, it is illegal to dispose of this battery into your municipal waste
stream. Please call 1-800-8-BATTERY for information on how to recycle this battery.
10
Trademarks
BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.
© 2015 Brother Industries, Ltd. All rights reserved.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the
United States and other countries.
Apple, Macintosh, Mac OS, Safari, iPad, iPhone, iPod touch and OS X are trademarks of Apple
Inc., registered in the United States and other countries.
AirPrint is a trademark of Apple Inc.
Google Play is a trademark of Google Inc.
Wi-Fi and Wi-Fi Alliance are registered trademarks of the Wi-Fi Alliance.
WPA, WPA2, Wi-Fi Protected Setup, Wi-Fi Protected Setup logo and Wi-Fi Direct are trademarks
of the Wi-Fi Alliance.
Android, Google Cloud Print are trademarks of Google, Inc.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used
under license.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Brother Industries, Ltd. under license.
Blue SDK
Copyright © Extended Systems, Inc., 2000-2005.
Portions copyright © iAnywhere Solutions, Inc., 2005-2013. All rights reserved.
Adobe and Reader are either registered trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
Portions of the graphics filter software are based in part on the work of the Independent JPEG
group.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in JAPAN and other
countries. QR Code Generating Program Copyright © 2008 DENSO WAVE INCORPORATED.
This product contains µDeepCore OBEX as Infrared Data communication protocol owned by
E-Globaledge Corporation Copyright 2006 E-Globaledge Corp. All Rights Reserved.
BarStar Pro Encode Library (DataMatrix, PDF417) Copyright © 2007 AINIX Corporation. All rights
reserved.
Epson ESC/P is a registered trademark of Seiko Epson Corporation.
Each owner whose software title is mentioned in this document has a Software License
Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related
documents and any other materials are all trademarks or registered trademarks of those
respective companies.
11
English
Open Source Licensing Remarks (PJ-773)
This product includes open-source software.
To see the open source licensing remarks, please go to the manual download selection on your
model's home page of Brother Solutions Center at support.brother.com/.
Regulation for PJ-722/PJ-723/PJ-762/PJ-763/
PJ-763MFi/PJ-773
Federal Communications Commission (FCC) Declaration of
Conformity (For USA Only)
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Responsible Party: Brother Mobile Solutions, Inc.
100 Technology Drive Suite 250A
Broomfield, CO 80021 U.S.A.
Tel: (303) 460-1600
declares, that the products
Product Name: Brother Thermal Printer
Model Number: PJ-722/PJ-723/PJ-762/
PJ-763/PJ-763MFi
PJ-773
12
Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
Important
The enclosed interface cable should be used in order to ensure compliance with the limits for
a Class B digital device.
Changes or modifications not expressly approved by Brother Mobile Solutions, Inc. could void
the users authority to operate the equipment.
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied
antenna. Unauthorize antenna, modification, or attachments could damage the transmitter and
may violate FCC regulations.
The available scientific evidence does not show that any health problems are associated with
using low power wireless devices. There is no proof, however, that these low power wireless
devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce
health effects (by heating tissue), exposure of low-level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low-level RF exposures have not found
any biological effects. Some studies have suggested that some biological effects might occur, but
such findings have not been confirmed by additional research. PJ-773 have been tested and
found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines.
Industry Canada Compliance Statement (For Canada only)
This device complies with Industry Canada license -exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
RF Exposure information
The product with the WLAN device has been tested to SAR and complies with FCC and IC
exposure requirements for portable devices. SAR testing has been done at distance of 0 cm from
the body.
The available scientific evidence does not show that any health problems are associated with
using low power wireless devices. There is no proof, however, that these low power wireless
devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce
health effects (by heating tissue), exposure of low-level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low-level RF exposures have not found
any biological effects. Some studies have suggested that some biological effects might occur, but
such findings have not been confirmed by additional research. PJ-773 have been tested and
found to comply with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules.
13
English
Rechargeable Li-ion Battery Specifications
Charging time: Approximately 3 hours when charged by an AC adapter (PA-AD-600).
Nominal Voltage: DC 10.8 V
Nominal Capacity: 1750 mAh
Rechargeable Li-ion Battery
Printer
Charging current: 900 mA (Maximum)
Charging voltage: up to DC 12.3 V (Maximum)
Surrounding Temperature Range
Charge 104°F/40°C
Standard discharge current 0.9 A 140°F/60°C
Maximum discharge current 7.5 A 104°F/40°C
Shipped battery Less than 1 month -4°F - 122°F/-20°C - 50°C
Less than 3 months -4°F - 104°F/-20°C - 40°C
Less than 1 year -4°F - 68°F/-20°C - 20°C
Charging Parameters
Maximum charging voltage 12.3 Vdc
Maximum charging current 1260 mA
LBE493001
Printed in USA

Navigation menu